@things-factory/figure-service 10.1.69 → 10.1.71

package/recipes/peg-board/recipe.json

@@ -0,0 +1,120 @@
+{
+  "name": "peg-board",
+  "title": {
+    "ko": "공구판",
+    "en": "peg board"
+  },
+  "description": {
+    "ko": "고른 부품(벽이나 작업대 뒤판) 앞면에 공구판과 걸이 한 줄을 붙입니다.",
+    "en": "A peg board with a row of hooks on the chosen part's front (a wall or a bench back)."
+  },
+  "category": "storage",
+  "tags": [
+    "peg board",
+    "tools",
+    "wall"
+  ],
+  "target": "part",
+  "params": [
+    {
+      "name": "pitch",
+      "kind": "mm",
+      "default": 150,
+      "label": {
+        "ko": "걸이 간격 (mm)",
+        "en": "hook pitch (mm)"
+      },
+      "hint": {
+        "ko": "걸이 사이 거리",
+        "en": "the distance between hooks"
+      },
+      "min": 50,
+      "max": 600
+    }
+  ],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-board",
+        "kind": "box",
+        "dimensions": {
+          "width": 1200,
+          "height": 800,
+          "depth": 15
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-hook",
+        "kind": "box",
+        "dimensions": {
+          "width": 10,
+          "height": 10,
+          "depth": 80
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-board",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-board",
+          "face": "back"
+        },
+        "origin": {}
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-hook",
+        "type": "fixed",
+        "body0": {
+          "part": "{id}-board",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-hook",
+          "face": "back"
+        },
+        "origin": {},
+        "repeat": {
+          "axis": "X",
+          "pitch": {
+            "param": "pitch"
+          }
+        }
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-board",
+      "material": {
+        "token": "palette.tpl-a8875a"
+      },
+      "palette": {
+        "palette.tpl-a8875a": "#a8875a"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-hook",
+      "material": {
+        "token": "palette.tpl-2f3437"
+      },
+      "palette": {
+        "palette.tpl-2f3437": "#2f3437"
+      }
+    }
+  ]
+}

package/recipes/peg-board/spec.json

@@ -0,0 +1,45 @@
+{
+  "name": "peg-board",
+  "category": "storage",
+  "tags": [
+    "peg board",
+    "tools",
+    "wall"
+  ],
+  "title": {
+    "ko": "공구판",
+    "en": "peg board"
+  },
+  "description": {
+    "ko": "고른 부품(벽이나 작업대 뒤판) 앞면에 공구판과 걸이 한 줄을 붙입니다.",
+    "en": "A peg board with a row of hooks on the chosen part's front (a wall or a bench back)."
+  },
+  "params": [
+    {
+      "name": "pitch",
+      "kind": "mm",
+      "default": 150,
+      "label": {
+        "ko": "걸이 간격 (mm)",
+        "en": "hook pitch (mm)"
+      },
+      "hint": {
+        "ko": "걸이 사이 거리",
+        "en": "the distance between hooks"
+      },
+      "min": 50,
+      "max": 600,
+      "bind": [
+        {
+          "step": {
+            "kind": "set-joint",
+            "joint": {
+              "id": "{id}-hook"
+            }
+          },
+          "path": "joint.repeat.pitch"
+        }
+      ]
+    }
+  ]
+}

package/recipes/photo-sensor-pair/build.mts

@@ -0,0 +1,11 @@
+/* 광전 센서 한 쌍 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 3000, y: 700, z: 800 }, 'TPL_PHOTO_SENSOR_PAIR'))
+  for (const [s, side] of [['emitter', 'max'], ['receiver', 'min']] as const)
+    m.box(s, 40, 80, 30)
+      .on(s, 'bottom', 'host', 'top', { z: side, x: { mm: { from: { of: 'part', part: 'host', axis: 'x' }, times: 0 } } })
+      .colour(s, 'palette.sensor', '#3a7bd5')
+  return m.asset
+}

package/recipes/photo-sensor-pair/facts.md

@@ -0,0 +1,3 @@
+# photo-sensor-pair — facts (not shown on screen; the guide's basis and our review)
+
+윗면 z 최소·최대 가장자리, x 위치 비율(둘이 같이). 40×80×30.

package/recipes/photo-sensor-pair/guide.en.md

@@ -0,0 +1,18 @@
+## When to use it
+
+To show where a sensor sees what passes on a conveyor.
+
+## Putting it in
+
+1. Choose the conveyor body; the two sensors face each other at both edges of its **top**.
+2. Set the **position** as a % from the middle.
+3. Press "put in".
+
+## Afterwards
+
+- Both sensors share the position.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- There is no sensing; it is the shape and the place.

package/recipes/photo-sensor-pair/guide.ko.md

@@ -0,0 +1,18 @@
+## 언제 쓰나
+
+컨베이어 위 물건이 지나가는 것을 감지하는 센서 자리를 보일 때 씁니다.
+
+## 넣는 순서
+
+1. 컨베이어 몸체를 고릅니다. 센서 두 개는 **윗면 양쪽 가장자리**에 마주 봅니다.
+2. **위치**를 가운데에서의 %로 정합니다.
+3. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 두 센서는 같은 위치에 함께 움직입니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 감지 동작은 없습니다. 모양과 자리만 넣습니다.

package/recipes/photo-sensor-pair/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_PHOTO_SENSOR_PAIR","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"emitter.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"emitter.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"emitter.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"receiver.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"receiver.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"receiver.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio.1","unit":"ratio","value":1},{"id":"k.ratio.0","unit":"ratio","value":0},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.dimension.x.value","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"emitter.shape","op":"box-shape@1","args":["emitter.dimension.width","emitter.dimension.height","emitter.dimension.depth"],"outputs":{"shape":"emitter.shapeValue"},"params":{"frame":"emitter.local"}},{"id":"emitter.pose","op":"rigid@1","args":["d.mm.0","emitter.on.host.along.y.1.sum.value","emitter.on.host.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"emitter.poseValue"},"params":{"from":"emitter.local","to":"emitter.seat"}},{"id":"emitter","op":"place@1","args":["emitter.shapeValue","emitter.world.value"],"outputs":{"placed":"emitter.placed"}},{"id":"host.dimension.x","op":"mul@1","args":["host.size.x","k.ratio.1"],"outputs":{"value":"host.dimension.x.value"}},{"id":"receiver.shape","op":"box-shape@1","args":["receiver.dimension.width","receiver.dimension.height","receiver.dimension.depth"],"outputs":{"shape":"receiver.shapeValue"},"params":{"frame":"receiver.local"}},{"id":"receiver.pose","op":"rigid@1","args":["d.mm.0","receiver.on.host.along.y.1.sum.value","receiver.on.host.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"receiver.poseValue"},"params":{"from":"receiver.local","to":"receiver.seat"}},{"id":"receiver","op":"place@1","args":["receiver.shapeValue","receiver.world.value"],"outputs":{"placed":"receiver.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"emitter.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"emitter.on.host.seat.y.0.times.value"}},{"id":"emitter.on.host.along.y.0.times","op":"mul@1","args":["emitter.dimension.height","k.ratio.0_5"],"outputs":{"value":"emitter.on.host.along.y.0.times.value"}},{"id":"emitter.on.host.along.y.1.sum","op":"add@1","args":["emitter.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"emitter.on.host.along.y.1.sum.value"}},{"id":"emitter.on.host.align.x.times","op":"mul@1","args":["host.dimension.x.value","k.ratio.0"],"outputs":{"value":"emitter.on.host.align.x.times.value"}},{"id":"emitter.on.host.edge.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"emitter.on.host.edge.z.0.times.value"}},{"id":"emitter.on.host.own-edge.z.0.times","op":"mul@1","args":["emitter.dimension.depth","k.ratio._0_5"],"outputs":{"value":"emitter.on.host.own-edge.z.0.times.value"}},{"id":"emitter.seat.rigid","op":"rigid@1","args":["emitter.on.host.align.x.times.value","emitter.on.host.seat.y.0.times.value","emitter.on.host.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"emitter.seat.value"},"params":{"from":"emitter.seat","to":"host.local"}},{"id":"emitter.chain","op":"compose@1","args":["emitter.seat.value","emitter.poseValue"],"outputs":{"pose":"emitter.chain.value"}},{"id":"emitter.world","op":"compose@1","args":["host.chain.value","emitter.chain.value"],"outputs":{"pose":"emitter.world.value"}},{"id":"receiver.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"receiver.on.host.seat.y.0.times.value"}},{"id":"receiver.on.host.along.y.0.times","op":"mul@1","args":["receiver.dimension.height","k.ratio.0_5"],"outputs":{"value":"receiver.on.host.along.y.0.times.value"}},{"id":"receiver.on.host.along.y.1.sum","op":"add@1","args":["receiver.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"receiver.on.host.along.y.1.sum.value"}},{"id":"receiver.on.host.align.x.times","op":"mul@1","args":["host.dimension.x.value","k.ratio.0"],"outputs":{"value":"receiver.on.host.align.x.times.value"}},{"id":"receiver.on.host.edge.z.0.times","op":"mul@1","args":["host.size.z","k.ratio._0_5"],"outputs":{"value":"receiver.on.host.edge.z.0.times.value"}},{"id":"receiver.on.host.own-edge.z.0.times","op":"mul@1","args":["receiver.dimension.depth","k.ratio.0_5"],"outputs":{"value":"receiver.on.host.own-edge.z.0.times.value"}},{"id":"receiver.seat.rigid","op":"rigid@1","args":["receiver.on.host.align.x.times.value","receiver.on.host.seat.y.0.times.value","receiver.on.host.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"receiver.seat.value"},"params":{"from":"receiver.seat","to":"host.local"}},{"id":"receiver.chain","op":"compose@1","args":["receiver.seat.value","receiver.poseValue"],"outputs":{"pose":"receiver.chain.value"}},{"id":"receiver.world","op":"compose@1","args":["host.chain.value","receiver.chain.value"],"outputs":{"pose":"receiver.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":3000,"host.size.y":700,"host.size.z":800,"emitter.dimension.width":40,"emitter.dimension.height":80,"emitter.dimension.depth":30,"receiver.dimension.width":40,"receiver.dimension.height":80,"receiver.dimension.depth":30},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-3a7bd5":"#3a7bd5"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"emitter","material":{"token":"palette.tpl-3a7bd5"}},{"target":"receiver","material":{"token":"palette.tpl-3a7bd5"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"emitter","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"emitter","face":"bottom"},"origin":{"align":{"z":"max","x":{"mm":{"from":{"of":"part","part":"host","axis":"x"},"times":0}}}}},{"id":"receiver","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"receiver","face":"bottom"},"origin":{"align":{"z":"min","x":{"mm":{"from":{"of":"part","part":"host","axis":"x"},"times":0}}}}}]}

package/recipes/photo-sensor-pair/recipe.json

@@ -0,0 +1,145 @@
+{
+  "name": "photo-sensor-pair",
+  "title": {
+    "ko": "광전 센서 한 쌍",
+    "en": "photo sensor pair"
+  },
+  "description": {
+    "ko": "고른 부품 윗면의 양쪽 가장자리에 마주 보는 광전 센서 두 개를 넣습니다.",
+    "en": "Two photo sensors facing each other at both edges of the chosen part's top."
+  },
+  "category": "conveyor",
+  "tags": [
+    "sensor",
+    "photo",
+    "conveyor"
+  ],
+  "target": "part",
+  "params": [
+    {
+      "name": "position",
+      "kind": "ratio",
+      "default": 0,
+      "min": -0.45,
+      "max": 0.45,
+      "label": {
+        "ko": "위치 (부품 길이에 대해)",
+        "en": "position (along the part)"
+      },
+      "hint": {
+        "ko": "가운데에서 길이 방향으로 떨어진 비율",
+        "en": "how far along from the middle, as a share of the length"
+      }
+    }
+  ],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-emitter",
+        "kind": "box",
+        "dimensions": {
+          "width": 40,
+          "height": 80,
+          "depth": 30
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-receiver",
+        "kind": "box",
+        "dimensions": {
+          "width": 40,
+          "height": 80,
+          "depth": 30
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-emitter",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-emitter",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "max",
+            "x": {
+              "mm": {
+                "from": {
+                  "of": "part",
+                  "part": "{target}",
+                  "axis": "x"
+                },
+                "times": {
+                  "param": "position"
+                }
+              }
+            }
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-receiver",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-receiver",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "min",
+            "x": {
+              "mm": {
+                "from": {
+                  "of": "part",
+                  "part": "{target}",
+                  "axis": "x"
+                },
+                "times": {
+                  "param": "position"
+                }
+              }
+            }
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-emitter",
+      "material": {
+        "token": "palette.tpl-3a7bd5"
+      },
+      "palette": {
+        "palette.tpl-3a7bd5": "#3a7bd5"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-receiver",
+      "material": {
+        "token": "palette.tpl-3a7bd5"
+      },
+      "palette": {
+        "palette.tpl-3a7bd5": "#3a7bd5"
+      }
+    }
+  ]
+}

package/recipes/photo-sensor-pair/spec.json

@@ -0,0 +1,54 @@
+{
+  "name": "photo-sensor-pair",
+  "category": "conveyor",
+  "tags": [
+    "sensor",
+    "photo",
+    "conveyor"
+  ],
+  "title": {
+    "ko": "광전 센서 한 쌍",
+    "en": "photo sensor pair"
+  },
+  "description": {
+    "ko": "고른 부품 윗면의 양쪽 가장자리에 마주 보는 광전 센서 두 개를 넣습니다.",
+    "en": "Two photo sensors facing each other at both edges of the chosen part's top."
+  },
+  "params": [
+    {
+      "name": "position",
+      "kind": "ratio",
+      "default": 0,
+      "min": -0.45,
+      "max": 0.45,
+      "label": {
+        "ko": "위치 (부품 길이에 대해)",
+        "en": "position (along the part)"
+      },
+      "hint": {
+        "ko": "가운데에서 길이 방향으로 떨어진 비율",
+        "en": "how far along from the middle, as a share of the length"
+      },
+      "bind": [
+        {
+          "step": {
+            "kind": "set-joint",
+            "joint": {
+              "id": "{id}-emitter"
+            }
+          },
+          "path": "joint.origin.align.x.mm.times"
+        },
+        {
+          "step": {
+            "kind": "set-joint",
+            "joint": {
+              "id": "{id}-receiver"
+            }
+          },
+          "path": "joint.origin.align.x.mm.times"
+        }
+      ]
+    }
+  ]
+}

package/recipes/pipe-run/build.mts

@@ -0,0 +1,11 @@
+/* 배관 직관 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 3000, y: 700, z: 800 }, 'TPL_PIPE_RUN'))
+  m.add({ id: 'pipe', kind: 'cylinder', dimensions: { radius: 50, length: 800 }, rotation: { x: 90, y: 0, z: 0 } } as never)
+    .follow('pipe', 'y', 'host', 'z')
+    .on('pipe', 'bottom', 'host', 'top', { x: 'max' })
+    .colour('pipe', 'palette.pipe', '#8e9aa6')
+  return m.asset
+}

package/recipes/pipe-run/facts.md

@@ -0,0 +1,3 @@
+# pipe-run — facts (not shown on screen; the guide's basis and our review)
+
+윗면 x 최대. 누운 원기둥, 길이 = 부품 Z, 반지름 매개변수. 한계: 엘보 없음(G3).

package/recipes/pipe-run/guide.en.md

@@ -0,0 +1,18 @@
+## When to use it
+
+For a pipe running over a machine or a frame.
+
+## Putting it in
+
+1. Choose the part; the pipe runs front to back along the right edge of its **top**.
+2. Set the **radius** in mm.
+3. Press "put in".
+
+## Afterwards
+
+- The pipe follows the part's depth (Z).
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- Bends (elbows) are not there yet.

package/recipes/pipe-run/guide.ko.md

@@ -0,0 +1,18 @@
+## 언제 쓰나
+
+설비나 프레임 위로 지나가는 배관을 놓을 때 씁니다.
+
+## 넣는 순서
+
+1. 부품을 고릅니다. 배관은 **윗면 오른쪽 가장자리**를 따라 앞뒤로 놓입니다.
+2. **반지름**을 mm로 정합니다.
+3. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 배관 길이는 부품 폭(Z)을 따릅니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 굽은 부분(엘보)은 아직 없습니다.

package/recipes/pipe-run/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_PIPE_RUN","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"pipe.dimension.radius","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio.1","unit":"ratio","value":1},{"id":"a.deg.90","unit":"deg","value":90},{"id":"k.ratio._1","unit":"ratio","value":-1}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.dimension.z.value"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"pipe.shape","op":"cylinder-shape@1","args":["pipe.dimension.radius","pipe.dimension.y.value"],"outputs":{"shape":"pipe.shapeValue"},"params":{"frame":"pipe.local"}},{"id":"pipe.pose","op":"rigid@1","args":["pipe.on.host.own-edge.x.0.times.value","pipe.on.host.along.y.1.sum.value","d.mm.0","a.deg.90","a.deg.0","a.deg.0"],"outputs":{"pose":"pipe.poseValue"},"params":{"from":"pipe.local","to":"pipe.seat"}},{"id":"pipe","op":"place@1","args":["pipe.shapeValue","pipe.world.value"],"outputs":{"placed":"pipe.placed"}},{"id":"pipe.dimension.y","op":"mul@1","args":["host.dimension.z.value","k.ratio.1"],"outputs":{"value":"pipe.dimension.y.value"}},{"id":"host.dimension.z","op":"mul@1","args":["host.size.z","k.ratio.1"],"outputs":{"value":"host.dimension.z.value"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"pipe.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"pipe.on.host.seat.y.0.times.value"}},{"id":"pipe.on.host.along.y.1.sum","op":"add@1","args":["pipe.dimension.radius","d.mm.0"],"outputs":{"value":"pipe.on.host.along.y.1.sum.value"}},{"id":"pipe.on.host.edge.x.0.times","op":"mul@1","args":["host.size.x","k.ratio.0_5"],"outputs":{"value":"pipe.on.host.edge.x.0.times.value"}},{"id":"pipe.on.host.own-edge.x.0.times","op":"mul@1","args":["pipe.dimension.radius","k.ratio._1"],"outputs":{"value":"pipe.on.host.own-edge.x.0.times.value"}},{"id":"pipe.seat.rigid","op":"rigid@1","args":["pipe.on.host.edge.x.0.times.value","pipe.on.host.seat.y.0.times.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"pipe.seat.value"},"params":{"from":"pipe.seat","to":"host.local"}},{"id":"pipe.chain","op":"compose@1","args":["pipe.seat.value","pipe.poseValue"],"outputs":{"pose":"pipe.chain.value"}},{"id":"pipe.world","op":"compose@1","args":["host.chain.value","pipe.chain.value"],"outputs":{"pose":"pipe.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":3000,"host.size.y":700,"host.size.z":800,"pipe.dimension.radius":50},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-8e9aa6":"#8e9aa6"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"pipe","material":{"token":"palette.tpl-8e9aa6"},"segments":12}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"pipe","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"pipe","face":"bottom"},"origin":{"align":{"x":"max"},"turn":{"x":90,"y":0,"z":0}}}]}

package/recipes/pipe-run/recipe.json

@@ -0,0 +1,100 @@
+{
+  "name": "pipe-run",
+  "title": {
+    "ko": "배관 직관",
+    "en": "pipe run"
+  },
+  "description": {
+    "ko": "고른 부품 윗면의 오른쪽 가장자리를 따라 앞뒤로 곧은 배관을 놓습니다.",
+    "en": "A straight pipe front to back along the right edge of the chosen part's top."
+  },
+  "category": "utility",
+  "tags": [
+    "pipe",
+    "piping"
+  ],
+  "target": "part",
+  "params": [
+    {
+      "name": "radius",
+      "kind": "mm",
+      "default": 50,
+      "label": {
+        "ko": "반지름 (mm)",
+        "en": "radius (mm)"
+      },
+      "hint": {
+        "ko": "배관의 굵기",
+        "en": "how thick the pipe is"
+      },
+      "min": 10,
+      "max": 500
+    }
+  ],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-pipe",
+        "kind": "cylinder",
+        "dimensions": {
+          "radius": {
+            "param": "radius"
+          },
+          "length": 800
+        }
+      }
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-pipe",
+      "axis": "y",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "z"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-pipe",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-pipe",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "x": "max"
+          },
+          "turn": {
+            "x": 90,
+            "y": 0,
+            "z": 0
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-pipe",
+      "material": {
+        "token": "palette.tpl-8e9aa6"
+      },
+      "palette": {
+        "palette.tpl-8e9aa6": "#8e9aa6"
+      }
+    },
+    {
+      "kind": "set-segments",
+      "target": "{id}-pipe",
+      "segments": 12
+    }
+  ]
+}

package/recipes/pipe-run/spec.json

@@ -0,0 +1,44 @@
+{
+  "name": "pipe-run",
+  "category": "utility",
+  "tags": [
+    "pipe",
+    "piping"
+  ],
+  "title": {
+    "ko": "배관 직관",
+    "en": "pipe run"
+  },
+  "description": {
+    "ko": "고른 부품 윗면의 오른쪽 가장자리를 따라 앞뒤로 곧은 배관을 놓습니다.",
+    "en": "A straight pipe front to back along the right edge of the chosen part's top."
+  },
+  "params": [
+    {
+      "name": "radius",
+      "kind": "mm",
+      "default": 50,
+      "label": {
+        "ko": "반지름 (mm)",
+        "en": "radius (mm)"
+      },
+      "hint": {
+        "ko": "배관의 굵기",
+        "en": "how thick the pipe is"
+      },
+      "min": 10,
+      "max": 500,
+      "bind": [
+        {
+          "step": {
+            "kind": "add-part",
+            "part": {
+              "id": "{id}-pipe"
+            }
+          },
+          "path": "part.dimensions.radius"
+        }
+      ]
+    }
+  ]
+}