@pascal-app/core 1.0.4 → 1.0.6

package/dist/schema/nodes/building.js

@@ -12,9 +12,11 @@ export const BuildingNode = BaseNode.extend({
         .default([]),
     position: z.tuple([z.number(), z.number(), z.number()]).default([0, 0, 0]),
     rotation: z.tuple([z.number(), z.number(), z.number()]).default([0, 0, 0]),
+    groundLevelId: z.templateLiteral(['level_', z.string()]).optional(),
 }).describe(dedent `
   Building node - used to represent a building
   - position: position in site coordinate system
   - rotation: rotation in site coordinate system
+  - groundLevelId: the level standing at grade, the ground line of the stack; levels with a lower floor index are below grade. Absent: the lowest level whose floor is not under the ground
   - children: array of levels, units referencing zones, and building-level systems such as elevators
   `);

package/dist/schema/nodes/cabinet.d.ts

@@ -1,13 +1,13 @@
 import { z } from 'zod';
 export declare const CabinetFrontStyleSchema: z.ZodEnum<{
-    slab: "slab";
-    shaker: "shaker";
     "raised-arch": "raised-arch";
+    shaker: "shaker";
+    slab: "slab";
 }>;
 export declare const CabinetTopFinishSchema: z.ZodEnum<{
-    trim: "trim";
     none: "none";
     "top-cabinet": "top-cabinet";
+    trim: "trim";
 }>;
 /** Canonical metric cabinet family used when no regional profile is selected. */
 export declare const CABINET_METRIC_DEFAULTS: {
@@ -17,107 +17,107 @@ export declare const CABINET_METRIC_DEFAULTS: {
     readonly countertopThickness: 0.02;
 };
 declare const CabinetCompartment: z.ZodDiscriminatedUnion<[z.ZodObject<{
+    id: z.ZodString;
+    height: z.ZodOptional<z.ZodNumber>;
     type: z.ZodLiteral<"shelf">;
     shelfCount: z.ZodOptional<z.ZodNumber>;
+}, z.core.$strip>, z.ZodObject<{
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
     type: z.ZodLiteral<"drawer">;
     drawerCount: z.ZodOptional<z.ZodNumber>;
+}, z.core.$strip>, z.ZodObject<{
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
     type: z.ZodLiteral<"door">;
     doorType: z.ZodOptional<z.ZodEnum<{
-        glass: "glass";
         double: "double";
+        glass: "glass";
         "single-left": "single-left";
         "single-right": "single-right";
     }>>;
     shelfCount: z.ZodOptional<z.ZodNumber>;
+}, z.core.$strip>, z.ZodObject<{
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
     type: z.ZodLiteral<"sink">;
     sinkLayout: z.ZodOptional<z.ZodEnum<{
         double: "double";
-        single: "single";
         "double-offset": "double-offset";
+        single: "single";
     }>>;
+}, z.core.$strip>, z.ZodObject<{
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
     type: z.ZodLiteral<"oven">;
+}, z.core.$strip>, z.ZodObject<{
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
     type: z.ZodLiteral<"microwave">;
+}, z.core.$strip>, z.ZodObject<{
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
     type: z.ZodLiteral<"dishwasher">;
+}, z.core.$strip>, z.ZodObject<{
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
+    cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
+    cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
+    cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
+    cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
+    type: z.ZodLiteral<"cooktop-gas">;
     cooktopLayout: z.ZodOptional<z.ZodEnum<{
         "gas-2burner": "gas-2burner";
         "gas-4burner": "gas-4burner";
         "gas-5burner-wok": "gas-5burner-wok";
         "gas-6burner": "gas-6burner";
     }>>;
+}, z.core.$strip>, z.ZodObject<{
+    id: z.ZodString;
+    height: z.ZodOptional<z.ZodNumber>;
     cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
     cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
     cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
     cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
-    type: z.ZodLiteral<"cooktop-gas">;
-    id: z.ZodString;
-    height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
+    type: z.ZodLiteral<"cooktop-induction">;
     cooktopLayout: z.ZodOptional<z.ZodEnum<{
         "induction-2zone": "induction-2zone";
         "induction-4zone": "induction-4zone";
     }>>;
-    cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
-    cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
-    cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
-    cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
-    type: z.ZodLiteral<"cooktop-induction">;
+}, z.core.$strip>, z.ZodObject<{
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
-}, z.core.$strip>, z.ZodObject<{
     type: z.ZodLiteral<"pull-out-pantry">;
     shelfCount: z.ZodOptional<z.ZodNumber>;
     pantryRackStyle: z.ZodOptional<z.ZodEnum<{
         glass: "glass";
-        wire: "wire";
         tray: "tray";
+        wire: "wire";
     }>>;
-    id: z.ZodString;
-    height: z.ZodOptional<z.ZodNumber>;
 }, z.core.$strip>, z.ZodObject<{
-    type: z.ZodLiteral<"fridge-single">;
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
+    type: z.ZodLiteral<"fridge-single">;
 }, z.core.$strip>, z.ZodObject<{
-    type: z.ZodLiteral<"fridge-double">;
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
+    type: z.ZodLiteral<"fridge-double">;
 }, z.core.$strip>, z.ZodObject<{
-    type: z.ZodLiteral<"fridge-top-freezer">;
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
+    type: z.ZodLiteral<"fridge-top-freezer">;
 }, z.core.$strip>, z.ZodObject<{
-    type: z.ZodLiteral<"fridge-bottom-freezer">;
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
+    type: z.ZodLiteral<"fridge-bottom-freezer">;
 }, z.core.$strip>, z.ZodObject<{
-    type: z.ZodLiteral<"hood-pyramid">;
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
+    type: z.ZodLiteral<"hood-pyramid">;
 }, z.core.$strip>, z.ZodObject<{
-    type: z.ZodLiteral<"hood-curved-glass">;
     id: z.ZodString;
     height: z.ZodOptional<z.ZodNumber>;
+    type: z.ZodLiteral<"hood-curved-glass">;
 }, z.core.$strip>], "type">;
 export type CabinetCompartmentSchema = z.infer<typeof CabinetCompartment>;
 export declare const CabinetNode: z.ZodObject<{
@@ -129,8 +129,8 @@ export declare const CabinetNode: z.ZodObject<{
         position: z.ZodTuple<[z.ZodNumber, z.ZodNumber, z.ZodNumber], null>;
         target: z.ZodTuple<[z.ZodNumber, z.ZodNumber, z.ZodNumber], null>;
         mode: z.ZodDefault<z.ZodEnum<{
-            perspective: "perspective";
             orthographic: "orthographic";
+            perspective: "perspective";
         }>>;
         fov: z.ZodOptional<z.ZodNumber>;
         zoom: z.ZodOptional<z.ZodNumber>;
@@ -141,23 +141,23 @@ export declare const CabinetNode: z.ZodObject<{
             ns: z.ZodOptional<z.ZodString>;
             id: z.ZodString;
             role: z.ZodOptional<z.ZodEnum<{
-                primary: "primary";
-                piece: "piece";
                 absorbed: "absorbed";
                 alias: "alias";
                 derived: "derived";
+                piece: "piece";
+                primary: "primary";
             }>>;
         }, z.core.$strip>>;
         lineage: z.ZodOptional<z.ZodObject<{
             op: z.ZodEnum<{
+                attach: "attach";
+                convert: "convert";
+                duplicate: "duplicate";
                 import: "import";
-                split: "split";
+                "make-independent": "make-independent";
                 merge: "merge";
-                duplicate: "duplicate";
-                convert: "convert";
                 promote: "promote";
-                "make-independent": "make-independent";
-                attach: "attach";
+                split: "split";
             }>;
             fromIds: z.ZodArray<z.ZodString>;
         }, z.core.$strip>>;
@@ -179,26 +179,26 @@ export declare const CabinetNode: z.ZodObject<{
     frontThickness: z.ZodDefault<z.ZodNumber>;
     frontGap: z.ZodDefault<z.ZodNumber>;
     frontStyle: z.ZodDefault<z.ZodEnum<{
-        slab: "slab";
-        shaker: "shaker";
         "raised-arch": "raised-arch";
+        shaker: "shaker";
+        slab: "slab";
     }>>;
     panelReady: z.ZodDefault<z.ZodBoolean>;
     handleStyle: z.ZodDefault<z.ZodEnum<{
-        cutout: "cutout";
-        none: "none";
         bar: "bar";
+        cutout: "cutout";
         hole: "hole";
         knob: "knob";
+        none: "none";
     }>>;
     handlePosition: z.ZodDefault<z.ZodEnum<{
+        auto: "auto";
         center: "center";
         top: "top";
-        auto: "auto";
     }>>;
     frontOverlay: z.ZodDefault<z.ZodEnum<{
-        inset: "inset";
         full: "full";
+        inset: "inset";
     }>>;
     withBottomPanel: z.ZodDefault<z.ZodBoolean>;
     showPlinth: z.ZodDefault<z.ZodBoolean>;
@@ -206,16 +206,16 @@ export declare const CabinetNode: z.ZodObject<{
     material: z.ZodOptional<z.ZodObject<{
         id: z.ZodOptional<z.ZodString>;
         preset: z.ZodOptional<z.ZodCatch<z.ZodEnum<{
-            custom: "custom";
-            white: "white";
             brick: "brick";
             concrete: "concrete";
-            wood: "wood";
+            custom: "custom";
             glass: "glass";
+            marble: "marble";
             metal: "metal";
             plaster: "plaster";
             tile: "tile";
-            marble: "marble";
+            white: "white";
+            wood: "wood";
         }>>>;
         properties: z.ZodOptional<z.ZodObject<{
             color: z.ZodDefault<z.ZodString>;
@@ -224,9 +224,9 @@ export declare const CabinetNode: z.ZodObject<{
             opacity: z.ZodDefault<z.ZodNumber>;
             transparent: z.ZodDefault<z.ZodBoolean>;
             side: z.ZodDefault<z.ZodEnum<{
-                front: "front";
                 back: "back";
                 double: "double";
+                front: "front";
             }>>;
         }, z.core.$strip>>;
         texture: z.ZodOptional<z.ZodObject<{
@@ -238,121 +238,121 @@ export declare const CabinetNode: z.ZodObject<{
     materialPreset: z.ZodOptional<z.ZodString>;
     slots: z.ZodOptional<z.ZodRecord<z.ZodString, z.ZodString>>;
     stack: z.ZodOptional<z.ZodArray<z.ZodDiscriminatedUnion<[z.ZodObject<{
+        id: z.ZodString;
+        height: z.ZodOptional<z.ZodNumber>;
         type: z.ZodLiteral<"shelf">;
         shelfCount: z.ZodOptional<z.ZodNumber>;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"drawer">;
         drawerCount: z.ZodOptional<z.ZodNumber>;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"door">;
         doorType: z.ZodOptional<z.ZodEnum<{
-            glass: "glass";
             double: "double";
+            glass: "glass";
             "single-left": "single-left";
             "single-right": "single-right";
         }>>;
         shelfCount: z.ZodOptional<z.ZodNumber>;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"sink">;
         sinkLayout: z.ZodOptional<z.ZodEnum<{
             double: "double";
-            single: "single";
             "double-offset": "double-offset";
+            single: "single";
         }>>;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"oven">;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"microwave">;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"dishwasher">;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
+        cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
+        cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
+        cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
+        cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
+        type: z.ZodLiteral<"cooktop-gas">;
         cooktopLayout: z.ZodOptional<z.ZodEnum<{
             "gas-2burner": "gas-2burner";
             "gas-4burner": "gas-4burner";
             "gas-5burner-wok": "gas-5burner-wok";
             "gas-6burner": "gas-6burner";
         }>>;
+    }, z.core.$strip>, z.ZodObject<{
+        id: z.ZodString;
+        height: z.ZodOptional<z.ZodNumber>;
         cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
         cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
         cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
         cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
-        type: z.ZodLiteral<"cooktop-gas">;
-        id: z.ZodString;
-        height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
+        type: z.ZodLiteral<"cooktop-induction">;
         cooktopLayout: z.ZodOptional<z.ZodEnum<{
             "induction-2zone": "induction-2zone";
             "induction-4zone": "induction-4zone";
         }>>;
-        cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
-        cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
-        cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
-        cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
-        type: z.ZodLiteral<"cooktop-induction">;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"pull-out-pantry">;
         shelfCount: z.ZodOptional<z.ZodNumber>;
         pantryRackStyle: z.ZodOptional<z.ZodEnum<{
             glass: "glass";
-            wire: "wire";
             tray: "tray";
+            wire: "wire";
         }>>;
-        id: z.ZodString;
-        height: z.ZodOptional<z.ZodNumber>;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"fridge-single">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"fridge-single">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"fridge-double">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"fridge-double">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"fridge-top-freezer">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"fridge-top-freezer">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"fridge-bottom-freezer">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"fridge-bottom-freezer">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"hood-pyramid">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"hood-pyramid">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"hood-curved-glass">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"hood-curved-glass">;
     }, z.core.$strip>], "type">>>;
     id: z.ZodDefault<z.ZodTemplateLiteral<`cabinet_${string}`>>;
     type: z.ZodDefault<z.ZodLiteral<"cabinet">>;
     runTier: z.ZodDefault<z.ZodEnum<{
-        wall: "wall";
         base: "base";
         tall: "tall";
+        wall: "wall";
     }>>;
     children: z.ZodDefault<z.ZodArray<z.ZodString>>;
     barLedge: z.ZodOptional<z.ZodObject<{
         edge: z.ZodDefault<z.ZodEnum<{
+            back: "back";
             left: "left";
             right: "right";
-            back: "back";
         }>>;
         height: z.ZodDefault<z.ZodNumber>;
         depth: z.ZodDefault<z.ZodNumber>;
@@ -369,8 +369,8 @@ export declare const CabinetModuleNode: z.ZodObject<{
         position: z.ZodTuple<[z.ZodNumber, z.ZodNumber, z.ZodNumber], null>;
         target: z.ZodTuple<[z.ZodNumber, z.ZodNumber, z.ZodNumber], null>;
         mode: z.ZodDefault<z.ZodEnum<{
-            perspective: "perspective";
             orthographic: "orthographic";
+            perspective: "perspective";
         }>>;
         fov: z.ZodOptional<z.ZodNumber>;
         zoom: z.ZodOptional<z.ZodNumber>;
@@ -381,23 +381,23 @@ export declare const CabinetModuleNode: z.ZodObject<{
             ns: z.ZodOptional<z.ZodString>;
             id: z.ZodString;
             role: z.ZodOptional<z.ZodEnum<{
-                primary: "primary";
-                piece: "piece";
                 absorbed: "absorbed";
                 alias: "alias";
                 derived: "derived";
+                piece: "piece";
+                primary: "primary";
             }>>;
         }, z.core.$strip>>;
         lineage: z.ZodOptional<z.ZodObject<{
             op: z.ZodEnum<{
+                attach: "attach";
+                convert: "convert";
+                duplicate: "duplicate";
                 import: "import";
-                split: "split";
+                "make-independent": "make-independent";
                 merge: "merge";
-                duplicate: "duplicate";
-                convert: "convert";
                 promote: "promote";
-                "make-independent": "make-independent";
-                attach: "attach";
+                split: "split";
             }>;
             fromIds: z.ZodArray<z.ZodString>;
         }, z.core.$strip>>;
@@ -419,26 +419,26 @@ export declare const CabinetModuleNode: z.ZodObject<{
     frontThickness: z.ZodDefault<z.ZodNumber>;
     frontGap: z.ZodDefault<z.ZodNumber>;
     frontStyle: z.ZodDefault<z.ZodEnum<{
-        slab: "slab";
-        shaker: "shaker";
         "raised-arch": "raised-arch";
+        shaker: "shaker";
+        slab: "slab";
     }>>;
     panelReady: z.ZodDefault<z.ZodBoolean>;
     handleStyle: z.ZodDefault<z.ZodEnum<{
-        cutout: "cutout";
-        none: "none";
         bar: "bar";
+        cutout: "cutout";
         hole: "hole";
         knob: "knob";
+        none: "none";
     }>>;
     handlePosition: z.ZodDefault<z.ZodEnum<{
+        auto: "auto";
         center: "center";
         top: "top";
-        auto: "auto";
     }>>;
     frontOverlay: z.ZodDefault<z.ZodEnum<{
-        inset: "inset";
         full: "full";
+        inset: "inset";
     }>>;
     withBottomPanel: z.ZodDefault<z.ZodBoolean>;
     showPlinth: z.ZodDefault<z.ZodBoolean>;
@@ -446,16 +446,16 @@ export declare const CabinetModuleNode: z.ZodObject<{
     material: z.ZodOptional<z.ZodObject<{
         id: z.ZodOptional<z.ZodString>;
         preset: z.ZodOptional<z.ZodCatch<z.ZodEnum<{
-            custom: "custom";
-            white: "white";
             brick: "brick";
             concrete: "concrete";
-            wood: "wood";
+            custom: "custom";
             glass: "glass";
+            marble: "marble";
             metal: "metal";
             plaster: "plaster";
             tile: "tile";
-            marble: "marble";
+            white: "white";
+            wood: "wood";
         }>>>;
         properties: z.ZodOptional<z.ZodObject<{
             color: z.ZodDefault<z.ZodString>;
@@ -464,9 +464,9 @@ export declare const CabinetModuleNode: z.ZodObject<{
             opacity: z.ZodDefault<z.ZodNumber>;
             transparent: z.ZodDefault<z.ZodBoolean>;
             side: z.ZodDefault<z.ZodEnum<{
-                front: "front";
                 back: "back";
                 double: "double";
+                front: "front";
             }>>;
         }, z.core.$strip>>;
         texture: z.ZodOptional<z.ZodObject<{
@@ -478,107 +478,107 @@ export declare const CabinetModuleNode: z.ZodObject<{
     materialPreset: z.ZodOptional<z.ZodString>;
     slots: z.ZodOptional<z.ZodRecord<z.ZodString, z.ZodString>>;
     stack: z.ZodOptional<z.ZodArray<z.ZodDiscriminatedUnion<[z.ZodObject<{
+        id: z.ZodString;
+        height: z.ZodOptional<z.ZodNumber>;
         type: z.ZodLiteral<"shelf">;
         shelfCount: z.ZodOptional<z.ZodNumber>;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"drawer">;
         drawerCount: z.ZodOptional<z.ZodNumber>;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"door">;
         doorType: z.ZodOptional<z.ZodEnum<{
-            glass: "glass";
             double: "double";
+            glass: "glass";
             "single-left": "single-left";
             "single-right": "single-right";
         }>>;
         shelfCount: z.ZodOptional<z.ZodNumber>;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"sink">;
         sinkLayout: z.ZodOptional<z.ZodEnum<{
             double: "double";
-            single: "single";
             "double-offset": "double-offset";
+            single: "single";
         }>>;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"oven">;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"microwave">;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"dishwasher">;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
+        cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
+        cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
+        cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
+        cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
+        type: z.ZodLiteral<"cooktop-gas">;
         cooktopLayout: z.ZodOptional<z.ZodEnum<{
             "gas-2burner": "gas-2burner";
             "gas-4burner": "gas-4burner";
             "gas-5burner-wok": "gas-5burner-wok";
             "gas-6burner": "gas-6burner";
         }>>;
+    }, z.core.$strip>, z.ZodObject<{
+        id: z.ZodString;
+        height: z.ZodOptional<z.ZodNumber>;
         cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
         cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
         cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
         cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
-        type: z.ZodLiteral<"cooktop-gas">;
-        id: z.ZodString;
-        height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
+        type: z.ZodLiteral<"cooktop-induction">;
         cooktopLayout: z.ZodOptional<z.ZodEnum<{
             "induction-2zone": "induction-2zone";
             "induction-4zone": "induction-4zone";
         }>>;
-        cooktopBurnersOn: z.ZodOptional<z.ZodBoolean>;
-        cooktopActiveBurners: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
-        cooktopKnobProgress: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
-        cooktopShowGrate: z.ZodOptional<z.ZodBoolean>;
-        type: z.ZodLiteral<"cooktop-induction">;
+    }, z.core.$strip>, z.ZodObject<{
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
-    }, z.core.$strip>, z.ZodObject<{
         type: z.ZodLiteral<"pull-out-pantry">;
         shelfCount: z.ZodOptional<z.ZodNumber>;
         pantryRackStyle: z.ZodOptional<z.ZodEnum<{
             glass: "glass";
-            wire: "wire";
             tray: "tray";
+            wire: "wire";
         }>>;
-        id: z.ZodString;
-        height: z.ZodOptional<z.ZodNumber>;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"fridge-single">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"fridge-single">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"fridge-double">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"fridge-double">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"fridge-top-freezer">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"fridge-top-freezer">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"fridge-bottom-freezer">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"fridge-bottom-freezer">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"hood-pyramid">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"hood-pyramid">;
     }, z.core.$strip>, z.ZodObject<{
-        type: z.ZodLiteral<"hood-curved-glass">;
         id: z.ZodString;
         height: z.ZodOptional<z.ZodNumber>;
+        type: z.ZodLiteral<"hood-curved-glass">;
     }, z.core.$strip>], "type">>>;
     id: z.ZodDefault<z.ZodTemplateLiteral<`cabinet-module_${string}`>>;
     type: z.ZodDefault<z.ZodLiteral<"cabinet-module">>;
@@ -588,8 +588,9 @@ export declare const CabinetModuleNode: z.ZodObject<{
         tall: "tall";
     }>>;
     moduleKind: z.ZodDefault<z.ZodEnum<{
-        standard: "standard";
         "corner-filler": "corner-filler";
+        standard: "standard";
+        "wall-filler": "wall-filler";
     }>>;
     openSide: z.ZodOptional<z.ZodEnum<{
         left: "left";
@@ -597,9 +598,9 @@ export declare const CabinetModuleNode: z.ZodObject<{
     }>>;
     cornerShelf: z.ZodOptional<z.ZodBoolean>;
     topFinish: z.ZodDefault<z.ZodEnum<{
-        trim: "trim";
         none: "none";
         "top-cabinet": "top-cabinet";
+        trim: "trim";
     }>>;
     topFinishHeight: z.ZodDefault<z.ZodNumber>;
     topFinishDepth: z.ZodDefault<z.ZodNumber>;