@jbrowse/core 4.3.0 → 5.0.0-beta.2

package/esm/util/Base1DUtils.js

@@ -1,205 +1,340 @@
-function lengthBetween(self, start, end) {
-    let bpSoFar = 0;
-    const { displayedRegions } = self;
-    if (start.index === end.index) {
-        bpSoFar += end.offset - start.offset;
-    }
-    else {
-        const s = displayedRegions[start.index];
-        bpSoFar += s.end - s.start - start.offset;
-        if (end.index - start.index >= 2) {
-            for (let i = start.index + 1, l = end.index; i < l; i++) {
-                const region = displayedRegions[i];
-                const len = region.end - region.start;
-                bpSoFar += len;
-            }
-        }
-        bpSoFar += end.offset;
+/**
+ * Offset in bp from a displayed region's **left screen edge**, which is its end
+ * when the region is reversed. This one reflection is what "reversed" means
+ * everywhere in a linear view: `bpToPx` below, the ruler's ticks
+ * (`LinearGenomeView/util.ts`), and any display placing a feature against a
+ * single block. Reach for it instead of writing `pos - region.start`, which
+ * silently lays out forward under a right-to-left ruler.
+ */
+export function bpOffsetInRegion(region, bp) {
+    return region.reversed ? region.end - bp : bp - region.start;
+}
+// total bp from the start of displayedRegions through regionIndex + regionOffset
+function cumulativeBp(displayedRegions, regionIndex, regionOffset) {
+    let bpSoFar = regionOffset;
+    for (let i = 0; i < regionIndex; i++) {
+        const r = displayedRegions[i];
+        bpSoFar += r.end - r.start;
     }
     return bpSoFar;
 }
+function computeTargetBpPerPx(self, start, end) {
+    const { displayedRegions, width } = self;
+    return ((cumulativeBp(displayedRegions, end.index, end.offset) -
+        cumulativeBp(displayedRegions, start.index, start.offset)) /
+        width);
+}
+function computeScrollPos(self, start, bpPerPx, extraBp) {
+    return Math.round((cumulativeBp(self.displayedRegions, start.index, start.offset) - extraBp) /
+        bpPerPx);
+}
 export function moveTo(self, start, end) {
-    if (!start || !end) {
-        return;
-    }
-    const { width, interRegionPaddingWidth, displayedRegions, bpPerPx, minimumBlockWidth, } = self;
-    const len = lengthBetween(self, start, end);
-    let numBlocksWideEnough = 0;
-    for (let i = start.index, l = end.index; i < l; i++) {
-        const r = displayedRegions[i];
-        if ((r.end - r.start) / bpPerPx > minimumBlockWidth) {
-            numBlocksWideEnough++;
-        }
-    }
-    const targetBpPerPx = len / (width - interRegionPaddingWidth * numBlocksWideEnough);
-    const newBpPerPx = self.zoomTo(targetBpPerPx);
-    let extraBp = 0;
-    if (targetBpPerPx < newBpPerPx) {
-        extraBp = ((newBpPerPx - targetBpPerPx) * self.width) / 2;
-    }
-    let bpToStart = -extraBp;
-    for (let i = 0, l = displayedRegions.length; i < l; i++) {
-        const region = displayedRegions[i];
-        if (start.index === i) {
-            bpToStart += start.offset;
-            break;
-        }
-        else {
-            bpToStart += region.end - region.start;
-        }
+    if (start && end) {
+        const targetBpPerPx = computeTargetBpPerPx(self, start, end);
+        const newBpPerPx = self.zoomTo(targetBpPerPx);
+        const extraBp = targetBpPerPx < newBpPerPx
+            ? ((newBpPerPx - targetBpPerPx) * self.width) / 2
+            : 0;
+        self.scrollTo(computeScrollPos(self, start, newBpPerPx, extraBp));
     }
-    const scrollPos = Math.round(bpToStart / self.bpPerPx);
-    self.scrollTo(scrollPos);
 }
-function coord(r, bp) {
-    return Math.floor(r.reversed ? r.end - bp : r.start + bp) + 1;
+/**
+ * Pure version of moveTo: returns the {bpPerPx, offsetPx} that moveTo would
+ * apply, without mutating any model. Assumes no bpPerPx clamping (i.e.
+ * Base1DView with no min/maxBpPerPx).
+ */
+export function computeMoveToLayout(self, start, end) {
+    const bpPerPx = computeTargetBpPerPx(self, start, end);
+    return { bpPerPx, offsetPx: computeScrollPos(self, start, bpPerPx, 0) };
+}
+// The 0-based (BED/interbase) coordinate at a pixel by the POINT convention:
+// the inverse of `bpToPx`, which maps a base to a point — and reversed, that
+// point is the base's right edge. Use it for arithmetic (feature start/end,
+// codon math); use `coord` only for display.
+//
+// `bp` is the offset from the region's left screen edge, and may be negative or
+// past the region's end: pxToBp reports out-of-bounds pixels too, so this has
+// to name a coordinate where no base is painted at all. That dual duty is
+// exactly why the rounding stays a plain floor here — there is no rounding rule
+// that is unambiguously right for both an in-bounds pixel and an extrapolated
+// one.
+//
+// So on a reversed region this is NOT the base painted at the pixel. When the
+// answer indexes per-base data, ask `basePaintedAt` instead, at a call site
+// that already knows the pixel is in bounds.
+function regionBase0(r, bp) {
+    return Math.floor(r.reversed ? r.end - bp : r.start + bp);
+}
+/**
+ * The base **painted** at a pixel. Pair it with `pxToBp`'s `offset` field, and
+ * only once you know the pixel is in bounds (`!oob`) — off the end of a region
+ * no base is painted and the question has no answer.
+ *
+ * Use this rather than `coord0` whenever the result indexes per-base data: a
+ * sequence string, a coverage bin, a per-base tooltip. Reversed, bp runs
+ * leftward, so base b covers offsets (b, b+1] — `coord0`'s floor names b+1 on
+ * b's leftmost pixel column, and names `r.end`, outside the region entirely, on
+ * the region's first column.
+ *
+ * This is the same one-base pivot as render-core's `makeCellLeftMapper` /
+ * `bpAtPx`, which is what the per-base painters draw with, so this is the
+ * readout that agrees with what is on screen. The parity block in
+ * `Base1DUtils.test.ts` holds the two together.
+ *
+ * They stay two spellings because there is no shared call to make, not because
+ * of the package graph — core declares `@jbrowse/render-core` and imports it
+ * from three modules already. `bpAtPx` takes a screen pixel plus a px/bp
+ * projection and is mostly about the float behaviour of that projection; this
+ * takes an offset already in bp and has no projection. Feeding `bpAtPx`
+ * synthetic bounds to fake one computes `(offsetBp * span) / span`, which is
+ * not exactly `offsetBp` at genome scale: over a 3000000-sample sweep of base
+ * boundaries the perturbation named the wrong base 6885 times, every one of
+ * them on a 248956422 bp region (1.9% of that span's samples) and none on any
+ * span at or below 133797422. What is left to share is the two lines below, and
+ * only render-core could hold them — it must not import core — which would put
+ * a pixel-free function downstream of the renderer and split it from its own
+ * forward twin, `bpOffsetInRegion` at the top of this file.
+ */
+export function basePaintedAt(r, offsetBp) {
+    return r.reversed
+        ? Math.ceil(r.end - offsetBp) - 1
+        : Math.floor(r.start + offsetBp);
+}
+// 1-based display coord: regionBase0 + 1. Use for showing a genomic position to
+// a user, not for arithmetic — round-tripping through bpToPx loses up to 1 bp
+// because bpToPx accepts 0-based BED-style coords. For arithmetic use `coord0`
+// (0-based) or pair `offset` with offsetBpToPx.
+function regionCoord(r, bp) {
+    return regionBase0(r, bp) + 1;
+}
+function pxToBpResult(r, offset, index, oob) {
+    return {
+        ...r,
+        oob,
+        offset,
+        index,
+        coord: regionCoord(r, offset),
+        coord0: regionBase0(r, offset),
+    };
 }
 export function pxToBp(self, px) {
-    let bpSoFar = 0;
-    const { bpPerPx, offsetPx, displayedRegions, interRegionPaddingWidth, staticBlocks, } = self;
-    const blocks = staticBlocks.contentBlocks;
+    const { bpPerPx, offsetPx, displayedRegions } = self;
+    const first = displayedRegions[0];
+    if (!first) {
+        throw new Error('pxToBp called with empty displayedRegions');
+    }
     const bp = (offsetPx + px) * bpPerPx;
     if (bp < 0) {
-        const r = displayedRegions[0];
-        const snap = r;
-        return {
-            ...snap,
-            oob: true,
-            coord: coord(r, bp),
-            offset: bp,
-            index: 0,
-        };
+        return pxToBpResult(first, bp, 0, true);
     }
-    const interRegionPaddingBp = interRegionPaddingWidth * bpPerPx;
-    let currBlock = 0;
-    for (let i = 0, l = displayedRegions.length; i < l; i++) {
+    let bpSoFar = 0;
+    for (let i = 0; i < displayedRegions.length; i++) {
         const r = displayedRegions[i];
         const len = r.end - r.start;
         const offset = bp - bpSoFar;
-        if (len + bpSoFar > bp && bpSoFar <= bp) {
-            const snap = r;
-            return {
-                ...snap,
-                oob: false,
-                offset,
-                coord: coord(r, offset),
-                index: i,
-            };
-        }
-        if (blocks[currBlock]?.regionNumber === i) {
-            const paddingStart = bpSoFar + len;
-            const paddingEnd = paddingStart + interRegionPaddingBp;
-            if (bp >= paddingStart &&
-                bp < paddingEnd &&
-                i + 1 < displayedRegions.length) {
-                const nextR = displayedRegions[i + 1];
-                const snap = nextR;
-                return {
-                    ...snap,
-                    oob: false,
-                    offset: 0,
-                    coord: coord(nextR, 0),
-                    index: i + 1,
-                };
-            }
-            bpSoFar += len + interRegionPaddingBp;
-            currBlock++;
-        }
-        else {
-            bpSoFar += len;
+        if (offset >= 0 && offset < len) {
+            return pxToBpResult(r, offset, i, false);
         }
+        bpSoFar += len;
     }
-    if (bp >= bpSoFar && displayedRegions.length > 0) {
-        const r = displayedRegions.at(-1);
-        const len = r.end - r.start;
-        const offset = bp - bpSoFar + len;
-        const snap = r;
-        return {
-            ...snap,
-            oob: true,
-            offset,
-            coord: coord(r, offset),
-            index: displayedRegions.length - 1,
-        };
-    }
-    return {
-        coord: 0,
-        index: 0,
-        refName: '',
-        oob: true,
-        assemblyName: '',
-        offset: 0,
-        start: 0,
-        end: 0,
-        reversed: false,
-    };
+    const last = displayedRegions.at(-1);
+    const offset = bp - bpSoFar + last.end - last.start;
+    return pxToBpResult(last, offset, displayedRegions.length - 1, true);
 }
-export function bpToPx({ refName, coord, regionNumber, self, }) {
+// Precise within-region float-bp-offset → track-px (unrounded). Use when the
+// input is pxToBp's `offset` field. Going through bpToPx with pxToBp's `coord`
+// loses up to 1 bp per call because regionCoord floors+1 (1-based coord) and
+// bpToPx then uses coord-r.start as a 0-based offset — visible as juddery
+// cursor drift during rapid scroll-zoom.
+export function offsetBpToPx(self, regionIndex, regionOffsetBp) {
+    return (cumulativeBp(self.displayedRegions, regionIndex, regionOffsetBp) /
+        self.bpPerPx);
+}
+// Accepts a 0-based genomic coord (BED-style feature.start/end). NOT a proper
+// inverse of pxToBp's `coord` field, which is 1-based — for that round-trip,
+// use offsetBpToPx with pxToBp's `offset` field instead.
+export function bpToPx({ refName, coord, displayedRegionIndex, self, }) {
+    const { bpPerPx, displayedRegions } = self;
     let bpSoFar = 0;
-    const { interRegionPaddingWidth, bpPerPx, displayedRegions, staticBlocks } = self;
-    const blocks = staticBlocks.contentBlocks;
-    const interRegionPaddingBp = interRegionPaddingWidth * bpPerPx;
-    let currBlock = 0;
-    let i = 0;
-    for (let l = displayedRegions.length; i < l; i++) {
+    for (let i = 0; i < displayedRegions.length; i++) {
         const r = displayedRegions[i];
-        const len = r.end - r.start;
         if (refName === r.refName &&
             coord >= r.start &&
             coord <= r.end &&
-            (regionNumber ? regionNumber === i : true)) {
-            bpSoFar += r.reversed ? r.end - coord : coord - r.start;
-            break;
-        }
-        if (blocks[currBlock]?.regionNumber === i) {
-            bpSoFar += len + interRegionPaddingBp;
-            currBlock++;
-        }
-        else {
-            bpSoFar += len;
+            (displayedRegionIndex === undefined || displayedRegionIndex === i)) {
+            const regionOffset = bpOffsetInRegion(r, coord);
+            return {
+                index: i,
+                offsetPx: Math.round((bpSoFar + regionOffset) / bpPerPx),
+            };
         }
-    }
-    const found = displayedRegions[i];
-    if (found) {
-        return {
-            index: i,
-            offsetPx: Math.round(bpSoFar / bpPerPx),
-        };
+        bpSoFar += r.end - r.start;
     }
     return undefined;
 }
-export function bpToPxMap({ refName, coord, regionNumber, self, }) {
-    let bpSoFar = 0;
-    const { interRegionPaddingWidth, bpPerPx, displayedRegions, staticBlocks } = self;
-    const blocks = staticBlocks.contentBlocks;
-    const interRegionPaddingBp = interRegionPaddingWidth * bpPerPx;
-    const map = {};
-    let currBlock = 0;
-    let i = 0;
-    for (let l = displayedRegions.length; i < l; i++) {
-        const r = displayedRegions[i];
-        const len = r.end - r.start;
-        if (refName === r.refName &&
-            coord >= r.start &&
-            coord <= r.end &&
-            (regionNumber === undefined ? true : regionNumber === i)) {
-            bpSoFar += r.reversed ? r.end - coord : coord - r.start;
-            break;
-        }
-        if (blocks[currBlock]?.regionNumber === i) {
-            bpSoFar += len + interRegionPaddingBp;
-            currBlock++;
-        }
-        else {
-            bpSoFar += len;
+/**
+ * The {@link BpOffset} a 0-based genomic coord sits at — a region index plus an
+ * offset in **bp** from that region's left screen edge, which is the shape
+ * `moveTo` and `computeMoveToLayout` take.
+ *
+ * `bpToPx` above answers the neighbouring question in pixels and returns an
+ * `index` too, so `{...bpToPx(...), offset: hit.offsetPx}` type-checks and is
+ * wrong: `moveTo` re-adds the bp of every region before `index`, which
+ * `offsetPx` has already counted, and divides by a bpPerPx that was never in
+ * the units to begin with. Reach for this when the destination is a coordinate
+ * rather than a pixel.
+ *
+ * Undefined when no displayed region holds the coord, same as `bpToPx`; a
+ * caller that means "as far as the region goes" clamps before asking.
+ */
+export function bpToOffset({ refName, coord, displayedRegions, }) {
+    for (const [index, r] of displayedRegions.entries()) {
+        if (refName === r.refName && coord >= r.start && coord <= r.end) {
+            return { refName, index, offset: bpOffsetInRegion(r, coord) };
         }
     }
-    const found = displayedRegions[i];
-    if (found) {
-        return {
-            index: i,
-            offsetPx: Math.round(bpSoFar / bpPerPx),
-        };
+    return undefined;
+}
+/**
+ * Where a 0-based genomic coord sits in the LINEARIZED bp space — the
+ * concatenation of `displayedRegions`, which is the space `windowStartBp`
+ * indexes and the one a viewport is stored in.
+ *
+ * `bpToPx`'s answer in those units, and without its rounding, which is the
+ * reason to reach for this one: `bpToPx` quantizes to a whole pixel at the
+ * CURRENT `bpPerPx`, so a caller computing a destination while the view is
+ * mid-zoom — an animated flight planning its next leg — gets a destination
+ * that shifts with whatever zoom it happened to ask at.
+ *
+ * `undefined` when no displayed region holds the coord, exactly as `bpToPx`
+ * answers: a refName the view is not showing has no place on its screen.
+ */
+export function bpToLinearBp({ refName, coord, displayedRegions, }) {
+    const at = bpToOffset({ refName, coord, displayedRegions });
+    return at ? cumulativeBp(displayedRegions, at.index, at.offset) : undefined;
+}
+/**
+ * Screen order of two {@link BpOffset}s: negative when `a` is to the left of
+ * `b`. `moveTo` takes its arguments left-to-right and computes a negative
+ * bpPerPx from a backwards pair, so a caller deriving the two from data that
+ * can name them in either order sorts with this first.
+ */
+export function compareBpOffsets(a, b) {
+    return a.index - b.index || a.offset - b.offset;
+}
+// Convenience wrapper around bpToPx that matches the shape used by
+// Base1DView's .bpToPx() view method — returns just the offsetPx.
+export function layoutBpToPx(layout, args) {
+    return bpToPx({ ...args, self: layout })?.offsetPx;
+}
+// A highlight's span narrowed to what `layout` can actually place. `bpToPx`
+// answers only for a coord that falls inside a displayed region, so an end
+// hanging past one takes the whole band down with it — a bookmark on a whole
+// chromosome drew nothing at all in a view showing a slice of that chromosome,
+// which is the shape every region a read-vs-ref dotplot's horizontal axis
+// displays has (gatherOverlaps windows them around the aligned segments).
+//
+// Ends that are already inside some region of this refName are left exactly
+// where they are, so a highlight spanning two same-refName regions still bands
+// across both rather than being clipped to the first. Only when one is
+// homeless does the first overlapping region get to clamp it.
+//
+// Exported for a caller that needs the two ends in the interval's OWN order —
+// `getLayoutHighlightCoords` below returns min/width, which a ribbon endpoint
+// cannot use.
+export function clipToDisplayedRegions(layout, region) {
+    const [start, end] = region.start <= region.end
+        ? [region.start, region.end]
+        : [region.end, region.start];
+    const rs = layout.displayedRegions.filter(r => r.refName === region.refName);
+    const placeable = (c) => rs.some(r => c >= r.start && c <= r.end);
+    if (placeable(start) && placeable(end)) {
+        return { start, end };
+    }
+    const r = rs.find(r => start <= r.end && end >= r.start);
+    return r
+        ? { start: Math.max(start, r.start), end: Math.min(end, r.end) }
+        : undefined;
+}
+// Map a region's start/end onto `layout` and return the pixel position+width to
+// render a highlight band. `minWidth` floors the band so it stays visible when
+// zoomed out far enough that it would otherwise collapse to a sub-pixel sliver.
+// Math.min/Math.abs make the result independent of whether the displayed region
+// is reversed.
+export function getLayoutHighlightCoords(layout, region, minWidth = 3) {
+    const clipped = clipToDisplayedRegions(layout, region);
+    if (!clipped) {
+        return undefined;
     }
-    return map;
+    const s = layoutBpToPx(layout, {
+        refName: region.refName,
+        coord: clipped.start,
+    });
+    const e = layoutBpToPx(layout, {
+        refName: region.refName,
+        coord: clipped.end,
+    });
+    return s !== undefined && e !== undefined
+        ? {
+            width: Math.max(Math.abs(e - s), minWidth),
+            left: Math.min(s, e) - layout.offsetPx,
+        }
+        : undefined;
+}
+// Plain-object overview projection (the "show all displayed regions in `width`
+// pixels" layout). Replaces the pattern of creating a temporary Base1DView
+// MST model just to call bpToPx/pxToBp/calculateDynamicBlocks on it.
+export function createOverviewLayout({ displayedRegions, width, minimumBlockWidth = 0, }) {
+    const totalBp = displayedRegions.reduce((acc, r) => acc + r.end - r.start, 0);
+    return {
+        displayedRegions,
+        width,
+        minimumBlockWidth,
+        bpPerPx: width > 0 ? totalBp / width : 0,
+        offsetPx: 0,
+    };
+}
+/** Project a span into another pixel space: each end becomes px * scale + translatePx. */
+export function transformPxSpan(span, scale, translatePx = 0) {
+    return {
+        leftPx: span.leftPx * scale + translatePx,
+        rightPx: span.rightPx * scale + translatePx,
+    };
+}
+/**
+ * Absolute pixel extent (measured from the layout origin) of the region blocks
+ * — content and elided — but not the blank inter-region padding at the ends.
+ * Since dynamic blocks only pad at the ends, the region blocks are contiguous,
+ * so the first block's left edge to the last block's right edge is the full
+ * extent.
+ *
+ * Uses block pixel geometry rather than projecting genomic coordinates because
+ * coalesced elided blocks have their coordinates zeroed out, so coordinate
+ * projection cannot reach them at all — and because pixel geometry is per-copy
+ * correct for free, where projecting a refName would land both copies of a
+ * twice-displayed region on the first.
+ */
+export function regionBlocksPxExtent(blocks) {
+    const regions = blocks.filter(b => b.type === 'ContentBlock' || b.type === 'ElidedBlock');
+    const first = regions.at(0);
+    const last = regions.at(-1);
+    return first && last
+        ? { leftPx: first.offsetPx, rightPx: last.offsetPx + last.widthPx }
+        : undefined;
+}
+/**
+ * The visible regions' pixel extent projected onto an overview layout: the span
+ * of the overview scalebar's "you are here" rectangle, and of the top edge of
+ * the polygon drawn under it. Both read this one extent so they always describe
+ * the same regions, elided ones included.
+ *
+ * The main view and the overview lay out the same regions from cumulative-bp 0,
+ * so a main-view pixel maps to the (more zoomed-out) overview by the bpPerPx
+ * ratio.
+ */
+export function getOverviewRegionPxSpan({ overview, bpPerPx, blocks, }) {
+    const extent = regionBlocksPxExtent(blocks);
+    return extent
+        ? transformPxSpan(extent, bpPerPx / overview.bpPerPx)
+        : undefined;
 }

package/esm/util/Base1DViewModel.d.ts

@@ -1,59 +1,136 @@
 import type { BpOffset } from './Base1DUtils.ts';
-import type { Feature } from './simpleFeature.ts';
-import type { Region as IRegion } from './types/index.ts';
+import type { Region as IRegion } from './types/data.ts';
 import type { Instance } from '@jbrowse/mobx-state-tree';
+/**
+ * #stateModel Base1DView
+ * #category general
+ * used in non-lgv view representations of a 1d view e.g. the two axes of the
+ * dotplot use this. categorized General rather than View because it is not a
+ * pluggable view type, which the name-suffix heuristic would otherwise assume
+ */
 declare const Base1DView: import("@jbrowse/mobx-state-tree").IModelType<{
     id: import("@jbrowse/mobx-state-tree").IOptionalIType<import("@jbrowse/mobx-state-tree").ISimpleType<string>, [undefined]>;
     displayedRegions: import("@jbrowse/mobx-state-tree").IOptionalIType<import("@jbrowse/mobx-state-tree").IType<IRegion[], IRegion[], IRegion[]>, [undefined]>;
     bpPerPx: import("@jbrowse/mobx-state-tree").IType<number | undefined, number, number>;
     offsetPx: import("@jbrowse/mobx-state-tree").IType<number | undefined, number, number>;
-    interRegionPaddingWidth: import("@jbrowse/mobx-state-tree").IOptionalIType<import("@jbrowse/mobx-state-tree").ISimpleType<number>, [undefined]>;
     minimumBlockWidth: import("@jbrowse/mobx-state-tree").IOptionalIType<import("@jbrowse/mobx-state-tree").ISimpleType<number>, [undefined]>;
 }, {
-    features: undefined | Feature[];
     volatileWidth: number;
 } & {
+    /**
+     * #action
+     */
     setDisplayedRegions(regions: IRegion[]): void;
+    /**
+     * #action
+     */
     setBpPerPx(val: number): void;
+    /**
+     * #action
+     */
     setVolatileWidth(width: number): void;
 } & {
+    /**
+     * #getter
+     */
     readonly width: number;
+    /**
+     * #getter
+     * zoom-in floor; overridden by extensions (e.g. the dotplot axes)
+     */
+    readonly minBpPerPx: number;
+    /**
+     * #getter
+     * zoom-out ceiling; overridden by extensions (e.g. the dotplot axes)
+     */
+    readonly maxBpPerPx: number;
+    /**
+     * #getter
+     */
     readonly assemblyNames: string[];
+    /**
+     * #getter
+     */
     readonly displayedRegionsTotalPx: number;
+    /**
+     * #getter
+     */
     readonly maxOffset: number;
+    /**
+     * #getter
+     */
     readonly minOffset: number;
+    /**
+     * #getter
+     */
     readonly totalBp: number;
 } & {
+    /**
+     * #getter
+     */
     readonly dynamicBlocks: import("./blockTypes.ts").BlockSet;
+    /**
+     * #getter
+     */
     readonly staticBlocks: import("./blockTypes.ts").BlockSet;
+    /**
+     * #getter
+     */
     readonly currBp: number;
 } & {
-    pxToBp(px: number): {
-        coord: number;
-        index: number;
-        refName: string;
-        oob: boolean;
-        assemblyName: string;
-        offset: number;
-        start: number;
-        end: number;
-        reversed?: boolean;
-    };
-    bpToPx({ refName, coord, regionNumber, }: {
+    /**
+     * #method
+     */
+    pxToBp(px: number): import("./Base1DUtils.ts").PxToBpResult;
+    /**
+     * #method
+     */
+    bpToPx(args: {
         refName: string;
         coord: number;
-        regionNumber?: number;
+        displayedRegionIndex?: number;
     }): number | undefined;
 } & {
-    setFeatures(features: Feature[]): void;
+    /**
+     * #action
+     * this makes a zoomed out view that shows all displayedRegions that makes
+     * the overview bar square with the scale bar
+     */
     showAllRegions(): void;
+    /**
+     * #action
+     */
     zoomOut(): void;
+    /**
+     * #action
+     */
     zoomIn(): void;
-    zoomTo(bpPerPx: number, offset?: number): number;
+    /**
+     * #action
+     */
+    zoomTo(bpPerPx: number, offset?: any): number;
+    /**
+     * #action
+     */
     scrollTo(offsetPx: number): number;
-    centerAt(coord: number, refName: string | undefined, regionNumber: number): void;
+    /**
+     * #action
+     */
+    centerAt(coord: number, refName: string | undefined, displayedRegionIndex: number): void;
+    /**
+     * #action
+     * note: the scroll is clamped to keep the view on the main screen
+     */
     scroll(distance: number): number;
 } & {
+    /**
+     * #action
+     * offset is the base-pair-offset in the displayed region, index is the
+     * index of the displayed region in the linear genome view
+     *
+     * @param start - object as `{start, end, offset, index}`
+     * @param end - object as `{start, end, offset, index}`
+     */
     moveTo(start?: BpOffset, end?: BpOffset): void;
 }, import("@jbrowse/mobx-state-tree")._NotCustomized, import("@jbrowse/mobx-state-tree")._NotCustomized>;
 export type Base1DViewStateModel = typeof Base1DView;