@faicad/faijs 0.30.9 → 0.32.2

package/dist/vendored/brepjs/sketching/sketch.d.ts

@@ -1,157 +0,0 @@
-import type { Plane } from '../core/planeTypes.js';
-import { type Vec3, type PointInput } from '../core/types.js';
-import type { ExtrusionProfile, SweepOptions } from '../operations/extrudeUtils.js';
-import type { LoftOptions } from '../operations/loftFns.js';
-import type { ClosedWire, Face, PlanarWire, Shape3D, Wire } from '../core/shapeTypes.js';
-/** Common interface for sketch-like objects that can be extruded, revolved, or lofted. */
-export interface SketchInterface {
-    /** Transforms the lines into a face. The lines should be closed. */
-    face(): Face;
-    /**
-     * Revolves the drawing on an axis (defined by its direction and an origin
-     * (defaults to the sketch origin)
-     */
-    revolve(revolutionAxis?: PointInput, config?: {
-        origin?: PointInput;
-    }): Shape3D;
-    /**
-     * Extrudes the sketch to a certain distance (along the default direction
-     * and origin of the sketch).
-     *
-     * You can define another extrusion direction or origin,
-     *
-     * It is also possible to twist extrude with an angle (in degrees), or to
-     * give a profile to the extrusion (the endFactor will scale the face, and
-     * the profile will define how the scale is applied (either linearly or with
-     * a s-shape).
-     */
-    extrude(extrusionDistance: number, extrusionConfig?: {
-        extrusionDirection?: PointInput;
-        extrusionProfile?: ExtrusionProfile;
-        twistAngle?: number;
-        origin?: PointInput;
-    }): Shape3D;
-    /**
-     * Loft between this sketch and another sketch (or an array of them)
-     *
-     * You can also define a `startPoint` for the loft (that will be placed
-     * before this sketch) and an `endPoint` after the last one.
-     *
-     * You can also define if you want the loft to result in a ruled surface.
-     *
-     * Note that all sketches will be deleted by this operation
-     */
-    loftWith(otherSketches: SketchInterface | SketchInterface[], loftConfig?: LoftOptions, returnShell?: boolean): Shape3D;
-    /**
-     * Sweep a profile sketch (built by the `sketchOnPlane` callback) along this
-     * sketch's wire path.
-     */
-    sweepSketch(sketchOnPlane: (plane: Plane, origin: Vec3) => SketchInterface, sweepConfig?: SweepOptions): Shape3D;
-}
-/**
- * Represent a closed or open wire profile with a default extrusion origin and direction.
- *
- * A Sketch wraps a single {@link Wire} and carries metadata (origin, direction,
- * optional base face) so that downstream operations like {@link Sketch.extrude},
- * {@link Sketch.revolve}, {@link Sketch.sweepSketch}, and {@link Sketch.loftWith}
- * know how to act on it without extra arguments.
- *
- * The class methods are thin delegations to the canonical functions in
- * `sketchFns.ts` (`sketchExtrude`, `sketchRevolve`, etc.). New functionality
- * should be added there.
- *
- * @remarks Most operations consume (delete) the sketch after producing a solid.
- *
- * @see {@link Sketcher} to build a Sketch interactively.
- * @see {@link CompoundSketch} for multi-wire (outer + holes) profiles.
- * @category Sketching
- */
-export default class Sketch implements SketchInterface {
-    /**
-     * The wire is typed as `ClosedWire & PlanarWire` to reflect the contract at
-     * Sketcher boundaries: `Sketcher.close()`, `closeWithMirror()`,
-     * `closeWithCustomCorner()`, and the canned-sketch factories all produce
-     * closed planar wires. Callers constructing `Sketch` from an arbitrary
-     * `Wire` must assert validity at the construction site.
-     */
-    wire: ClosedWire & PlanarWire;
-    /**
-     * @ignore
-     */
-    _defaultOrigin: Vec3;
-    /**
-     * @ignore
-     */
-    _defaultDirection: Vec3;
-    protected _baseFace: Face | null | undefined;
-    constructor(wire: ClosedWire & PlanarWire, { defaultOrigin, defaultDirection, }?: {
-        defaultOrigin?: PointInput;
-        defaultDirection?: PointInput;
-    });
-    get baseFace(): Face | null | undefined;
-    set baseFace(newFace: Face | null | undefined);
-    /** Release all kernel resources held by this sketch. */
-    delete(): void;
-    /** Create an independent deep copy of this sketch. */
-    clone(): Sketch;
-    /** Get the 3D origin used as default for extrusion and revolution. */
-    get defaultOrigin(): Vec3;
-    /** Set the 3D origin used as default for extrusion and revolution. */
-    set defaultOrigin(newOrigin: PointInput);
-    /** Get the default extrusion/normal direction. */
-    get defaultDirection(): Vec3;
-    /** Set the default extrusion/normal direction. */
-    set defaultDirection(newDirection: PointInput);
-    /** Transforms the lines into a face. The lines should be closed. */
-    face(): Face;
-    /** Return a clone of the underlying wire. */
-    wires(): Wire;
-    /** Alias for {@link Sketch.face}. */
-    faces(): Face;
-    /**
-     * Revolves the drawing on an axis (defined by its direction and an origin
-     * (defaults to the sketch origin)
-     *
-     * @remarks Consumes the sketch — calling this twice throws on the second call.
-     */
-    revolve(revolutionAxis?: PointInput, config?: {
-        origin?: PointInput;
-    }): Shape3D;
-    /** Extrudes the sketch to a certain distance (along the default direction
-     * and origin of the sketch).
-     *
-     * You can define another extrusion direction or origin,
-     *
-     * It is also possible to twist extrude with an angle (in degrees), or to
-     * give a profile to the extrusion (the endFactor will scale the face, and
-     * the profile will define how the scale is applied (either linearly or with
-     * a s-shape).
-     *
-     * @remarks Consumes the sketch — calling this twice throws on the second call.
-     */
-    extrude(extrusionDistance: number, config?: {
-        extrusionDirection?: PointInput;
-        extrusionProfile?: ExtrusionProfile;
-        twistAngle?: number;
-        origin?: PointInput;
-    }): Shape3D;
-    /**
-     * Sweep along this sketch another sketch defined in the function
-     * `sketchOnPlane`.
-     *
-     * @remarks Consumes both this sketch and the one returned by `sketchOnPlane` —
-     * calling either consumer twice throws on the second call.
-     */
-    sweepSketch(sketchOnPlane: (plane: Plane, origin: Vec3) => SketchInterface, sweepConfig?: SweepOptions): Shape3D;
-    /** Loft between this sketch and another sketch (or an array of them)
-     *
-     * You can also define a `startPoint` for the loft (that will be placed
-     * before this sketch) and an `endPoint` after the last one.
-     *
-     * You can also define if you want the loft to result in a ruled surface.
-     *
-     * Note that all sketches will be deleted by this operation
-     */
-    loftWith(otherSketches: SketchInterface | SketchInterface[], loftConfig?: LoftOptions, returnShell?: boolean): Shape3D;
-}
-//# sourceMappingURL=sketch.d.ts.map

package/dist/vendored/brepjs/sketching/sketch.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"sketch.d.ts","sourceRoot":"","sources":["../../../../src/vendored/brepjs/sketching/sketch.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,uBAAuB,CAAC;AAGnD,OAAO,EAAU,KAAK,IAAI,EAAE,KAAK,UAAU,EAAE,MAAM,kBAAkB,CAAC;AACtE,OAAO,KAAK,EAAE,gBAAgB,EAAE,YAAY,EAAE,MAAM,+BAA+B,CAAC;AACpF,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAC;AAC5D,OAAO,KAAK,EAAE,UAAU,EAAE,IAAI,EAAE,UAAU,EAAE,OAAO,EAAE,IAAI,EAAE,MAAM,uBAAuB,CAAC;AAIzF,0FAA0F;AAC1F,MAAM,WAAW,eAAe;IAC9B,oEAAoE;IACpE,IAAI,IAAI,IAAI,CAAC;IACb;;;OAGG;IACH,OAAO,CAAC,cAAc,CAAC,EAAE,UAAU,EAAE,MAAM,CAAC,EAAE;QAAE,MAAM,CAAC,EAAE,UAAU,CAAA;KAAE,GAAG,OAAO,CAAC;IAChF;;;;;;;;;;OAUG;IACH,OAAO,CACL,iBAAiB,EAAE,MAAM,EACzB,eAAe,CAAC,EAAE;QAChB,kBAAkB,CAAC,EAAE,UAAU,CAAC;QAChC,gBAAgB,CAAC,EAAE,gBAAgB,CAAC;QACpC,UAAU,CAAC,EAAE,MAAM,CAAC;QACpB,MAAM,CAAC,EAAE,UAAU,CAAC;KACrB,GACA,OAAO,CAAC;IACX;;;;;;;;;OASG;IACH,QAAQ,CACN,aAAa,EAAE,eAAe,GAAG,eAAe,EAAE,EAClD,UAAU,CAAC,EAAE,WAAW,EACxB,WAAW,CAAC,EAAE,OAAO,GACpB,OAAO,CAAC;IACX;;;OAGG;IACH,WAAW,CACT,aAAa,EAAE,CAAC,KAAK,EAAE,KAAK,EAAE,MAAM,EAAE,IAAI,KAAK,eAAe,EAC9D,WAAW,CAAC,EAAE,YAAY,GACzB,OAAO,CAAC;CACZ;AAED;;;;;;;;;;;;;;;;;GAiBG;AACH,MAAM,CAAC,OAAO,OAAO,MAAO,YAAW,eAAe;IACpD;;;;;;OAMG;IACH,IAAI,EAAE,UAAU,GAAG,UAAU,CAAC;IAC9B;;OAEG;IACH,cAAc,EAAE,IAAI,CAAC;IACrB;;OAEG;IACH,iBAAiB,EAAE,IAAI,CAAC;IACxB,SAAS,CAAC,SAAS,EAAE,IAAI,GAAG,IAAI,GAAG,SAAS,CAAC;gBAE3C,IAAI,EAAE,UAAU,GAAG,UAAU,EAC7B,EACE,aAAyB,EACzB,gBAA4B,GAC7B,GAAE;QACD,aAAa,CAAC,EAAE,UAAU,CAAC;QAC3B,gBAAgB,CAAC,EAAE,UAAU,CAAC;KAC1B;IAQR,IAAI,QAAQ,IAAI,IAAI,GAAG,IAAI,GAAG,SAAS,CAEtC;IAED,IAAI,QAAQ,CAAC,OAAO,EAAE,IAAI,GAAG,IAAI,GAAG,SAAS,EAI5C;IAED,wDAAwD;IACxD,MAAM,IAAI,IAAI;IAOd,sDAAsD;IACtD,KAAK,IAAI,MAAM;IAUf,sEAAsE;IACtE,IAAI,aAAa,IAAI,IAAI,CAExB;IAED,sEAAsE;IACtE,IAAI,aAAa,CAAC,SAAS,EAAE,UAAU,EAEtC;IAED,kDAAkD;IAClD,IAAI,gBAAgB,IAAI,IAAI,CAE3B;IAED,kDAAkD;IAClD,IAAI,gBAAgB,CAAC,YAAY,EAAE,UAAU,EAE5C;IAED,oEAAoE;IACpE,IAAI,IAAI,IAAI;IAIZ,6CAA6C;IAC7C,KAAK,IAAI,IAAI;IAIb,qCAAqC;IACrC,KAAK,IAAI,IAAI;IAIb;;;;;OAKG;IACH,OAAO,CAAC,cAAc,CAAC,EAAE,UAAU,EAAE,MAAM,GAAE;QAAE,MAAM,CAAC,EAAE,UAAU,CAAA;KAAO,GAAG,OAAO;IAInF;;;;;;;;;;;OAWG;IACH,OAAO,CACL,iBAAiB,EAAE,MAAM,EACzB,MAAM,GAAE;QACN,kBAAkB,CAAC,EAAE,UAAU,CAAC;QAChC,gBAAgB,CAAC,EAAE,gBAAgB,CAAC;QACpC,UAAU,CAAC,EAAE,MAAM,CAAC;QACpB,MAAM,CAAC,EAAE,UAAU,CAAC;KAChB,GACL,OAAO;IAIV;;;;;;OAMG;IACH,WAAW,CACT,aAAa,EAAE,CAAC,KAAK,EAAE,KAAK,EAAE,MAAM,EAAE,IAAI,KAAK,eAAe,EAC9D,WAAW,GAAE,YAAiB,GAC7B,OAAO;IAIV;;;;;;;;OAQG;IACH,QAAQ,CACN,aAAa,EAAE,eAAe,GAAG,eAAe,EAAE,EAClD,UAAU,GAAE,WAAgB,EAC5B,WAAW,UAAQ,GAClB,OAAO;CAGX"}

package/dist/vendored/brepjs/sketching/sketch.js

@@ -1,151 +0,0 @@
-import { unwrap } from '../core/result.js';
-import { copyShape } from '../topology/cast.js';
-import { toVec3 } from '../core/types.js';
-import { createFace, createWire } from '../core/shapeTypes.js';
-import * as fns from './sketchFns.js';
-/**
- * Represent a closed or open wire profile with a default extrusion origin and direction.
- *
- * A Sketch wraps a single {@link Wire} and carries metadata (origin, direction,
- * optional base face) so that downstream operations like {@link Sketch.extrude},
- * {@link Sketch.revolve}, {@link Sketch.sweepSketch}, and {@link Sketch.loftWith}
- * know how to act on it without extra arguments.
- *
- * The class methods are thin delegations to the canonical functions in
- * `sketchFns.ts` (`sketchExtrude`, `sketchRevolve`, etc.). New functionality
- * should be added there.
- *
- * @remarks Most operations consume (delete) the sketch after producing a solid.
- *
- * @see {@link Sketcher} to build a Sketch interactively.
- * @see {@link CompoundSketch} for multi-wire (outer + holes) profiles.
- * @category Sketching
- */
-export default class Sketch {
-    /**
-     * The wire is typed as `ClosedWire & PlanarWire` to reflect the contract at
-     * Sketcher boundaries: `Sketcher.close()`, `closeWithMirror()`,
-     * `closeWithCustomCorner()`, and the canned-sketch factories all produce
-     * closed planar wires. Callers constructing `Sketch` from an arbitrary
-     * `Wire` must assert validity at the construction site.
-     */
-    wire;
-    /**
-     * @ignore
-     */
-    _defaultOrigin;
-    /**
-     * @ignore
-     */
-    _defaultDirection;
-    _baseFace;
-    constructor(wire, { defaultOrigin = [0, 0, 0], defaultDirection = [0, 0, 1], } = {}) {
-        this.wire = wire;
-        this._defaultOrigin = toVec3(defaultOrigin);
-        this._defaultDirection = toVec3(defaultDirection);
-        this.baseFace = null;
-    }
-    get baseFace() {
-        return this._baseFace;
-    }
-    set baseFace(newFace) {
-        // `.delete()` is a no-op on arena kernels (occt-wasm); dispose reclaims the slot.
-        if (this._baseFace)
-            this._baseFace[Symbol.dispose]();
-        this._baseFace = newFace ? createFace(unwrap(copyShape(newFace.wrapped))) : newFace;
-    }
-    /** Release all kernel resources held by this sketch. */
-    delete() {
-        // Route through Symbol.dispose so the wire/baseFace arena slots are actually
-        // reclaimed on occt-wasm, where the raw `.delete()` is a no-op.
-        this.wire[Symbol.dispose]();
-        if (this.baseFace)
-            this.baseFace[Symbol.dispose]();
-    }
-    /** Create an independent deep copy of this sketch. */
-    clone() {
-        const cloned = createWire(unwrap(copyShape(this.wire.wrapped)));
-        const sketch = new Sketch(cloned, {
-            defaultOrigin: this.defaultOrigin,
-            defaultDirection: this.defaultDirection,
-        });
-        if (this.baseFace)
-            sketch.baseFace = createFace(unwrap(copyShape(this.baseFace.wrapped)));
-        return sketch;
-    }
-    /** Get the 3D origin used as default for extrusion and revolution. */
-    get defaultOrigin() {
-        return this._defaultOrigin;
-    }
-    /** Set the 3D origin used as default for extrusion and revolution. */
-    set defaultOrigin(newOrigin) {
-        this._defaultOrigin = toVec3(newOrigin);
-    }
-    /** Get the default extrusion/normal direction. */
-    get defaultDirection() {
-        return this._defaultDirection;
-    }
-    /** Set the default extrusion/normal direction. */
-    set defaultDirection(newDirection) {
-        this._defaultDirection = toVec3(newDirection);
-    }
-    /** Transforms the lines into a face. The lines should be closed. */
-    face() {
-        return fns.sketchFace(this);
-    }
-    /** Return a clone of the underlying wire. */
-    wires() {
-        return fns.sketchWires(this);
-    }
-    /** Alias for {@link Sketch.face}. */
-    faces() {
-        return this.face();
-    }
-    /**
-     * Revolves the drawing on an axis (defined by its direction and an origin
-     * (defaults to the sketch origin)
-     *
-     * @remarks Consumes the sketch — calling this twice throws on the second call.
-     */
-    revolve(revolutionAxis, config = {}) {
-        return fns.sketchRevolve(this, revolutionAxis, config);
-    }
-    /** Extrudes the sketch to a certain distance (along the default direction
-     * and origin of the sketch).
-     *
-     * You can define another extrusion direction or origin,
-     *
-     * It is also possible to twist extrude with an angle (in degrees), or to
-     * give a profile to the extrusion (the endFactor will scale the face, and
-     * the profile will define how the scale is applied (either linearly or with
-     * a s-shape).
-     *
-     * @remarks Consumes the sketch — calling this twice throws on the second call.
-     */
-    extrude(extrusionDistance, config = {}) {
-        return fns.sketchExtrude(this, extrusionDistance, config);
-    }
-    /**
-     * Sweep along this sketch another sketch defined in the function
-     * `sketchOnPlane`.
-     *
-     * @remarks Consumes both this sketch and the one returned by `sketchOnPlane` —
-     * calling either consumer twice throws on the second call.
-     */
-    sweepSketch(sketchOnPlane, sweepConfig = {}) {
-        return fns.sketchSweep(this, sketchOnPlane, sweepConfig);
-    }
-    /** Loft between this sketch and another sketch (or an array of them)
-     *
-     * You can also define a `startPoint` for the loft (that will be placed
-     * before this sketch) and an `endPoint` after the last one.
-     *
-     * You can also define if you want the loft to result in a ruled surface.
-     *
-     * Note that all sketches will be deleted by this operation
-     */
-    loftWith(otherSketches, loftConfig = {}, returnShell = false) {
-        return fns.sketchLoft(this, otherSketches, loftConfig, returnShell);
-    }
-}
-//# sourceMappingURL=sketch.js.map

package/dist/vendored/brepjs/sketching/sketch.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"sketch.js","sourceRoot":"","sources":["../../../../src/vendored/brepjs/sketching/sketch.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,MAAM,EAAE,MAAM,mBAAmB,CAAC;AAC3C,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAChD,OAAO,EAAE,MAAM,EAA8B,MAAM,kBAAkB,CAAC;AAItE,OAAO,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAC;AAC/D,OAAO,KAAK,GAAG,MAAM,gBAAgB,CAAC;AAwDtC;;;;;;;;;;;;;;;;;GAiBG;AACH,MAAM,CAAC,OAAO,OAAO,MAAM;IACzB;;;;;;OAMG;IACH,IAAI,CAA0B;IAC9B;;OAEG;IACH,cAAc,CAAO;IACrB;;OAEG;IACH,iBAAiB,CAAO;IACd,SAAS,CAA0B;IAC7C,YACE,IAA6B,EAC7B,EACE,aAAa,GAAG,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EACzB,gBAAgB,GAAG,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,MAI1B,EAAE;QAEN,IAAI,CAAC,IAAI,GAAG,IAAI,CAAC;QACjB,IAAI,CAAC,cAAc,GAAG,MAAM,CAAC,aAAa,CAAC,CAAC;QAC5C,IAAI,CAAC,iBAAiB,GAAG,MAAM,CAAC,gBAAgB,CAAC,CAAC;QAClD,IAAI,CAAC,QAAQ,GAAG,IAAI,CAAC;IACvB,CAAC;IAED,IAAI,QAAQ;QACV,OAAO,IAAI,CAAC,SAAS,CAAC;IACxB,CAAC;IAED,IAAI,QAAQ,CAAC,OAAgC;QAC3C,kFAAkF;QAClF,IAAI,IAAI,CAAC,SAAS;YAAE,IAAI,CAAC,SAAS,CAAC,MAAM,CAAC,OAAO,CAAC,EAAE,CAAC;QACrD,IAAI,CAAC,SAAS,GAAG,OAAO,CAAC,CAAC,CAAC,UAAU,CAAC,MAAM,CAAC,SAAS,CAAC,OAAO,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC;IACtF,CAAC;IAED,wDAAwD;IACxD,MAAM;QACJ,6EAA6E;QAC7E,gEAAgE;QAChE,IAAI,CAAC,IAAI,CAAC,MAAM,CAAC,OAAO,CAAC,EAAE,CAAC;QAC5B,IAAI,IAAI,CAAC,QAAQ;YAAE,IAAI,CAAC,QAAQ,CAAC,MAAM,CAAC,OAAO,CAAC,EAAE,CAAC;IACrD,CAAC;IAED,sDAAsD;IACtD,KAAK;QACH,MAAM,MAAM,GAAG,UAAU,CAAC,MAAM,CAAC,SAAS,CAAC,IAAI,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC,CAA4B,CAAC;QAC3F,MAAM,MAAM,GAAG,IAAI,MAAM,CAAC,MAAM,EAAE;YAChC,aAAa,EAAE,IAAI,CAAC,aAAa;YACjC,gBAAgB,EAAE,IAAI,CAAC,gBAAgB;SACxC,CAAC,CAAC;QACH,IAAI,IAAI,CAAC,QAAQ;YAAE,MAAM,CAAC,QAAQ,GAAG,UAAU,CAAC,MAAM,CAAC,SAAS,CAAC,IAAI,CAAC,QAAQ,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC;QAC1F,OAAO,MAAM,CAAC;IAChB,CAAC;IAED,sEAAsE;IACtE,IAAI,aAAa;QACf,OAAO,IAAI,CAAC,cAAc,CAAC;IAC7B,CAAC;IAED,sEAAsE;IACtE,IAAI,aAAa,CAAC,SAAqB;QACrC,IAAI,CAAC,cAAc,GAAG,MAAM,CAAC,SAAS,CAAC,CAAC;IAC1C,CAAC;IAED,kDAAkD;IAClD,IAAI,gBAAgB;QAClB,OAAO,IAAI,CAAC,iBAAiB,CAAC;IAChC,CAAC;IAED,kDAAkD;IAClD,IAAI,gBAAgB,CAAC,YAAwB;QAC3C,IAAI,CAAC,iBAAiB,GAAG,MAAM,CAAC,YAAY,CAAC,CAAC;IAChD,CAAC;IAED,oEAAoE;IACpE,IAAI;QACF,OAAO,GAAG,CAAC,UAAU,CAAC,IAAI,CAAC,CAAC;IAC9B,CAAC;IAED,6CAA6C;IAC7C,KAAK;QACH,OAAO,GAAG,CAAC,WAAW,CAAC,IAAI,CAAC,CAAC;IAC/B,CAAC;IAED,qCAAqC;IACrC,KAAK;QACH,OAAO,IAAI,CAAC,IAAI,EAAE,CAAC;IACrB,CAAC;IAED;;;;;OAKG;IACH,OAAO,CAAC,cAA2B,EAAE,SAAkC,EAAE;QACvE,OAAO,GAAG,CAAC,aAAa,CAAC,IAAI,EAAE,cAAc,EAAE,MAAM,CAAC,CAAC;IACzD,CAAC;IAED;;;;;;;;;;;OAWG;IACH,OAAO,CACL,iBAAyB,EACzB,SAKI,EAAE;QAEN,OAAO,GAAG,CAAC,aAAa,CAAC,IAAI,EAAE,iBAAiB,EAAE,MAAM,CAAC,CAAC;IAC5D,CAAC;IAED;;;;;;OAMG;IACH,WAAW,CACT,aAA8D,EAC9D,cAA4B,EAAE;QAE9B,OAAO,GAAG,CAAC,WAAW,CAAC,IAAI,EAAE,aAAa,EAAE,WAAW,CAAC,CAAC;IAC3D,CAAC;IAED;;;;;;;;OAQG;IACH,QAAQ,CACN,aAAkD,EAClD,aAA0B,EAAE,EAC5B,WAAW,GAAG,KAAK;QAEnB,OAAO,GAAG,CAAC,UAAU,CAAC,IAAI,EAAE,aAAa,EAAE,UAAU,EAAE,WAAW,CAAC,CAAC;IACtE,CAAC;CACF","sourcesContent":["import type { Plane } from '../core/planeTypes.js';\nimport { unwrap } from '../core/result.js';\nimport { copyShape } from '../topology/cast.js';\nimport { toVec3, type Vec3, type PointInput } from '../core/types.js';\nimport type { ExtrusionProfile, SweepOptions } from '../operations/extrudeUtils.js';\nimport type { LoftOptions } from '../operations/loftFns.js';\nimport type { ClosedWire, Face, PlanarWire, Shape3D, Wire } from '../core/shapeTypes.js';\nimport { createFace, createWire } from '../core/shapeTypes.js';\nimport * as fns from './sketchFns.js';\n\n/** Common interface for sketch-like objects that can be extruded, revolved, or lofted. */\nexport interface SketchInterface {\n  /** Transforms the lines into a face. The lines should be closed. */\n  face(): Face;\n  /**\n   * Revolves the drawing on an axis (defined by its direction and an origin\n   * (defaults to the sketch origin)\n   */\n  revolve(revolutionAxis?: PointInput, config?: { origin?: PointInput }): Shape3D;\n  /**\n   * Extrudes the sketch to a certain distance (along the default direction\n   * and origin of the sketch).\n   *\n   * You can define another extrusion direction or origin,\n   *\n   * It is also possible to twist extrude with an angle (in degrees), or to\n   * give a profile to the extrusion (the endFactor will scale the face, and\n   * the profile will define how the scale is applied (either linearly or with\n   * a s-shape).\n   */\n  extrude(\n    extrusionDistance: number,\n    extrusionConfig?: {\n      extrusionDirection?: PointInput;\n      extrusionProfile?: ExtrusionProfile;\n      twistAngle?: number;\n      origin?: PointInput;\n    }\n  ): Shape3D;\n  /**\n   * Loft between this sketch and another sketch (or an array of them)\n   *\n   * You can also define a `startPoint` for the loft (that will be placed\n   * before this sketch) and an `endPoint` after the last one.\n   *\n   * You can also define if you want the loft to result in a ruled surface.\n   *\n   * Note that all sketches will be deleted by this operation\n   */\n  loftWith(\n    otherSketches: SketchInterface | SketchInterface[],\n    loftConfig?: LoftOptions,\n    returnShell?: boolean\n  ): Shape3D;\n  /**\n   * Sweep a profile sketch (built by the `sketchOnPlane` callback) along this\n   * sketch's wire path.\n   */\n  sweepSketch(\n    sketchOnPlane: (plane: Plane, origin: Vec3) => SketchInterface,\n    sweepConfig?: SweepOptions\n  ): Shape3D;\n}\n\n/**\n * Represent a closed or open wire profile with a default extrusion origin and direction.\n *\n * A Sketch wraps a single {@link Wire} and carries metadata (origin, direction,\n * optional base face) so that downstream operations like {@link Sketch.extrude},\n * {@link Sketch.revolve}, {@link Sketch.sweepSketch}, and {@link Sketch.loftWith}\n * know how to act on it without extra arguments.\n *\n * The class methods are thin delegations to the canonical functions in\n * `sketchFns.ts` (`sketchExtrude`, `sketchRevolve`, etc.). New functionality\n * should be added there.\n *\n * @remarks Most operations consume (delete) the sketch after producing a solid.\n *\n * @see {@link Sketcher} to build a Sketch interactively.\n * @see {@link CompoundSketch} for multi-wire (outer + holes) profiles.\n * @category Sketching\n */\nexport default class Sketch implements SketchInterface {\n  /**\n   * The wire is typed as `ClosedWire & PlanarWire` to reflect the contract at\n   * Sketcher boundaries: `Sketcher.close()`, `closeWithMirror()`,\n   * `closeWithCustomCorner()`, and the canned-sketch factories all produce\n   * closed planar wires. Callers constructing `Sketch` from an arbitrary\n   * `Wire` must assert validity at the construction site.\n   */\n  wire: ClosedWire & PlanarWire;\n  /**\n   * @ignore\n   */\n  _defaultOrigin: Vec3;\n  /**\n   * @ignore\n   */\n  _defaultDirection: Vec3;\n  protected _baseFace: Face | null | undefined;\n  constructor(\n    wire: ClosedWire & PlanarWire,\n    {\n      defaultOrigin = [0, 0, 0],\n      defaultDirection = [0, 0, 1],\n    }: {\n      defaultOrigin?: PointInput;\n      defaultDirection?: PointInput;\n    } = {}\n  ) {\n    this.wire = wire;\n    this._defaultOrigin = toVec3(defaultOrigin);\n    this._defaultDirection = toVec3(defaultDirection);\n    this.baseFace = null;\n  }\n\n  get baseFace(): Face | null | undefined {\n    return this._baseFace;\n  }\n\n  set baseFace(newFace: Face | null | undefined) {\n    // `.delete()` is a no-op on arena kernels (occt-wasm); dispose reclaims the slot.\n    if (this._baseFace) this._baseFace[Symbol.dispose]();\n    this._baseFace = newFace ? createFace(unwrap(copyShape(newFace.wrapped))) : newFace;\n  }\n\n  /** Release all kernel resources held by this sketch. */\n  delete(): void {\n    // Route through Symbol.dispose so the wire/baseFace arena slots are actually\n    // reclaimed on occt-wasm, where the raw `.delete()` is a no-op.\n    this.wire[Symbol.dispose]();\n    if (this.baseFace) this.baseFace[Symbol.dispose]();\n  }\n\n  /** Create an independent deep copy of this sketch. */\n  clone(): Sketch {\n    const cloned = createWire(unwrap(copyShape(this.wire.wrapped))) as ClosedWire & PlanarWire;\n    const sketch = new Sketch(cloned, {\n      defaultOrigin: this.defaultOrigin,\n      defaultDirection: this.defaultDirection,\n    });\n    if (this.baseFace) sketch.baseFace = createFace(unwrap(copyShape(this.baseFace.wrapped)));\n    return sketch;\n  }\n\n  /** Get the 3D origin used as default for extrusion and revolution. */\n  get defaultOrigin(): Vec3 {\n    return this._defaultOrigin;\n  }\n\n  /** Set the 3D origin used as default for extrusion and revolution. */\n  set defaultOrigin(newOrigin: PointInput) {\n    this._defaultOrigin = toVec3(newOrigin);\n  }\n\n  /** Get the default extrusion/normal direction. */\n  get defaultDirection(): Vec3 {\n    return this._defaultDirection;\n  }\n\n  /** Set the default extrusion/normal direction. */\n  set defaultDirection(newDirection: PointInput) {\n    this._defaultDirection = toVec3(newDirection);\n  }\n\n  /** Transforms the lines into a face. The lines should be closed. */\n  face(): Face {\n    return fns.sketchFace(this);\n  }\n\n  /** Return a clone of the underlying wire. */\n  wires(): Wire {\n    return fns.sketchWires(this);\n  }\n\n  /** Alias for {@link Sketch.face}. */\n  faces(): Face {\n    return this.face();\n  }\n\n  /**\n   * Revolves the drawing on an axis (defined by its direction and an origin\n   * (defaults to the sketch origin)\n   *\n   * @remarks Consumes the sketch — calling this twice throws on the second call.\n   */\n  revolve(revolutionAxis?: PointInput, config: { origin?: PointInput } = {}): Shape3D {\n    return fns.sketchRevolve(this, revolutionAxis, config);\n  }\n\n  /** Extrudes the sketch to a certain distance (along the default direction\n   * and origin of the sketch).\n   *\n   * You can define another extrusion direction or origin,\n   *\n   * It is also possible to twist extrude with an angle (in degrees), or to\n   * give a profile to the extrusion (the endFactor will scale the face, and\n   * the profile will define how the scale is applied (either linearly or with\n   * a s-shape).\n   *\n   * @remarks Consumes the sketch — calling this twice throws on the second call.\n   */\n  extrude(\n    extrusionDistance: number,\n    config: {\n      extrusionDirection?: PointInput;\n      extrusionProfile?: ExtrusionProfile;\n      twistAngle?: number;\n      origin?: PointInput;\n    } = {}\n  ): Shape3D {\n    return fns.sketchExtrude(this, extrusionDistance, config);\n  }\n\n  /**\n   * Sweep along this sketch another sketch defined in the function\n   * `sketchOnPlane`.\n   *\n   * @remarks Consumes both this sketch and the one returned by `sketchOnPlane` —\n   * calling either consumer twice throws on the second call.\n   */\n  sweepSketch(\n    sketchOnPlane: (plane: Plane, origin: Vec3) => SketchInterface,\n    sweepConfig: SweepOptions = {}\n  ): Shape3D {\n    return fns.sketchSweep(this, sketchOnPlane, sweepConfig);\n  }\n\n  /** Loft between this sketch and another sketch (or an array of them)\n   *\n   * You can also define a `startPoint` for the loft (that will be placed\n   * before this sketch) and an `endPoint` after the last one.\n   *\n   * You can also define if you want the loft to result in a ruled surface.\n   *\n   * Note that all sketches will be deleted by this operation\n   */\n  loftWith(\n    otherSketches: SketchInterface | SketchInterface[],\n    loftConfig: LoftOptions = {},\n    returnShell = false\n  ): Shape3D {\n    return fns.sketchLoft(this, otherSketches, loftConfig, returnShell);\n  }\n}\n"]}

package/dist/vendored/brepjs/sketching/sketchFns.d.ts

@@ -1,89 +0,0 @@
-/**
- * Standalone functions for Sketch and CompoundSketch operations.
- *
- * These functions hold the canonical implementations; the matching class
- * methods (`Sketch.extrude`, `CompoundSketch.face`, etc.) delegate here.
- */
-import type { Plane } from '../core/planeTypes.js';
-import { type Vec3, type PointInput } from '../core/types.js';
-import type { ExtrusionProfile, SweepOptions } from '../operations/extrudeUtils.js';
-import type { LoftOptions } from '../operations/loftFns.js';
-import type { OrientedFace, Shape3D, Wire } from '../core/shapeTypes.js';
-import type { PlanarFace } from '../core/validityTypes.js';
-import type { SketchData } from '../2d/blueprints/lib.js';
-import Sketch, { type SketchInterface } from './sketch.js';
-import CompoundSketch from './compoundSketch.js';
-/** Wrap SketchData into a Sketch instance. */
-export declare function wrapSketchData(data: SketchData): Sketch;
-/** Wrap an array of SketchData into a CompoundSketch. */
-export declare function wrapSketchDataArray(dataArr: SketchData[]): CompoundSketch;
-/**
- * Collapse a sketch-like (the `SketchInterface | Sketches` union that
- * `Drawing.sketchOnPlane` can return) to a single {@link Sketch} for use as a
- * loft or sweep section. A single-wire profile passes through; a multi-piece
- * profile keeps its first wire and disposes the rest, since loft/sweep sections
- * are single wires.
- */
-export declare function asSketch(sketchLike: SketchInterface): Sketch;
-/** Build a face from a sketch's closed planar wire. */
-export declare function sketchFace(sketch: Sketch): OrientedFace & PlanarFace;
-/** Return an independent clone of the sketch's wire. */
-export declare function sketchWires(sketch: Sketch): Wire;
-/**
- * Revolve a sketch around an axis to produce a solid of revolution.
- *
- * @remarks Consumes the sketch — calling twice throws on the second call.
- */
-export declare function sketchRevolve(sketch: Sketch, revolutionAxis?: PointInput, { origin }?: {
-    origin?: PointInput;
-}): Shape3D;
-/**
- * Extrude a sketch to a given distance.
- *
- * Supports profile (taper) extrusion via `extrusionProfile`, twist extrusion
- * via `twistAngle`, and direction/origin overrides.
- *
- * @remarks Consumes the sketch — calling twice throws on the second call.
- */
-export declare function sketchExtrude(sketch: Sketch, extrusionDistance: number, { extrusionDirection, extrusionProfile, twistAngle, origin, }?: {
-    extrusionDirection?: PointInput;
-    extrusionProfile?: ExtrusionProfile;
-    twistAngle?: number;
-    origin?: PointInput;
-}): Shape3D;
-/**
- * Sweep a profile sketch (built by `sketchOnPlane`) along this sketch's wire path.
- *
- * @remarks Consumes both this sketch and the one returned by `sketchOnPlane` —
- * calling either twice throws on the second call.
- */
-export declare function sketchSweep(sketch: Sketch, sketchOnPlane: (plane: Plane, origin: Vec3) => SketchInterface, sweepConfig?: SweepOptions): Shape3D;
-/**
- * Loft between this sketch and one or more other sketches.
- *
- * @remarks Consumes all input sketches — calling twice throws on the second call.
- */
-export declare function sketchLoft(sketch: Sketch, otherSketches: SketchInterface | SketchInterface[], loftConfig?: LoftOptions, returnShell?: boolean): Shape3D;
-/** Build a face from a compound sketch (outer boundary with holes). */
-export declare function compoundSketchFace(sketch: CompoundSketch): OrientedFace & PlanarFace;
-/** Return all wires (outer + holes) combined into a compound shape. */
-export declare function compoundSketchWires(sketch: CompoundSketch): import("../index.js").Compound;
-/**
- * Extrude a compound sketch (outer + holes) along the default or given direction.
- *
- * Supports twist and profile extrusions. For twist/profile modes each
- * sub-sketch is extruded as a shell, then capped into a solid.
- */
-export declare function compoundSketchExtrude(sketch: CompoundSketch, extrusionDistance: number, { extrusionDirection, extrusionProfile, twistAngle, origin, }?: {
-    extrusionDirection?: PointInput;
-    extrusionProfile?: ExtrusionProfile;
-    twistAngle?: number;
-    origin?: PointInput;
-}): Shape3D;
-/** Revolve a compound sketch (outer + holes) around an axis. */
-export declare function compoundSketchRevolve(sketch: CompoundSketch, revolutionAxis?: PointInput, { origin }?: {
-    origin?: PointInput;
-}): Shape3D;
-/** Loft between two compound sketches with matching sub-sketch counts. */
-export declare function compoundSketchLoft(sketch: CompoundSketch, other: CompoundSketch, loftConfig?: LoftOptions): Shape3D;
-//# sourceMappingURL=sketchFns.d.ts.map

package/dist/vendored/brepjs/sketching/sketchFns.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"sketchFns.d.ts","sourceRoot":"","sources":["../../../../src/vendored/brepjs/sketching/sketchFns.ts"],"names":[],"mappings":"AAAA;;;;;GAKG;AAEH,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,uBAAuB,CAAC;AAYnD,OAAO,EAAU,KAAK,IAAI,EAAE,KAAK,UAAU,EAAE,MAAM,kBAAkB,CAAC;AAMtE,OAAO,KAAK,EAAE,gBAAgB,EAAE,YAAY,EAAE,MAAM,+BAA+B,CAAC;AAEpF,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAC;AAC5D,OAAO,KAAK,EAGV,YAAY,EACZ,OAAO,EAEP,IAAI,EAEL,MAAM,uBAAuB,CAAC;AAE/B,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,0BAA0B,CAAC;AAC3D,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,yBAAyB,CAAC;AAE1D,OAAO,MAAM,EAAE,EAAE,KAAK,eAAe,EAAE,MAAM,aAAa,CAAC;AAC3D,OAAO,cAAc,MAAM,qBAAqB,CAAC;AAMjD,8CAA8C;AAC9C,wBAAgB,cAAc,CAAC,IAAI,EAAE,UAAU,GAAG,MAAM,CAQvD;AAED,yDAAyD;AACzD,wBAAgB,mBAAmB,CAAC,OAAO,EAAE,UAAU,EAAE,GAAG,cAAc,CAEzE;AAED;;;;;;GAMG;AACH,wBAAgB,QAAQ,CAAC,UAAU,EAAE,eAAe,GAAG,MAAM,CAW5D;AAMD,uDAAuD;AACvD,wBAAgB,UAAU,CAAC,MAAM,EAAE,MAAM,GAAG,YAAY,GAAG,UAAU,CAQpE;AAED,wDAAwD;AACxD,wBAAgB,WAAW,CAAC,MAAM,EAAE,MAAM,GAAG,IAAI,CAEhD;AAED;;;;GAIG;AACH,wBAAgB,aAAa,CAC3B,MAAM,EAAE,MAAM,EACd,cAAc,CAAC,EAAE,UAAU,EAC3B,EAAE,MAAM,EAAE,GAAE;IAAE,MAAM,CAAC,EAAE,UAAU,CAAA;CAAO,GACvC,OAAO,CAQT;AAED;;;;;;;GAOG;AACH,wBAAgB,aAAa,CAC3B,MAAM,EAAE,MAAM,EACd,iBAAiB,EAAE,MAAM,EACzB,EACE,kBAAkB,EAClB,gBAAgB,EAChB,UAAU,EACV,MAAM,GACP,GAAE;IACD,kBAAkB,CAAC,EAAE,UAAU,CAAC;IAChC,gBAAgB,CAAC,EAAE,gBAAgB,CAAC;IACpC,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,MAAM,CAAC,EAAE,UAAU,CAAC;CAChB,GACL,OAAO,CA0BT;AAED;;;;;GAKG;AACH,wBAAgB,WAAW,CACzB,MAAM,EAAE,MAAM,EACd,aAAa,EAAE,CAAC,KAAK,EAAE,KAAK,EAAE,MAAM,EAAE,IAAI,KAAK,eAAe,EAC9D,WAAW,GAAE,YAAiB,GAC7B,OAAO,CAyBT;AAED;;;;GAIG;AACH,wBAAgB,UAAU,CACxB,MAAM,EAAE,MAAM,EACd,aAAa,EAAE,eAAe,GAAG,eAAe,EAAE,EAClD,UAAU,GAAE,WAAgB,EAC5B,WAAW,UAAQ,GAClB,OAAO,CAeT;AAmCD,uEAAuE;AACvE,wBAAgB,kBAAkB,CAAC,MAAM,EAAE,cAAc,GAAG,YAAY,GAAG,UAAU,CAUpF;AAED,uEAAuE;AACvE,wBAAgB,mBAAmB,CAAC,MAAM,EAAE,cAAc,kCAGzD;AAED;;;;;GAKG;AACH,wBAAgB,qBAAqB,CACnC,MAAM,EAAE,cAAc,EACtB,iBAAiB,EAAE,MAAM,EACzB,EACE,kBAAkB,EAClB,gBAAgB,EAChB,UAAU,EACV,MAAM,GACP,GAAE;IACD,kBAAkB,CAAC,EAAE,UAAU,CAAC;IAChC,gBAAgB,CAAC,EAAE,gBAAgB,CAAC;IACpC,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,MAAM,CAAC,EAAE,UAAU,CAAC;CAChB,GACL,OAAO,CAoCT;AAED,gEAAgE;AAChE,wBAAgB,qBAAqB,CACnC,MAAM,EAAE,cAAc,EACtB,cAAc,CAAC,EAAE,UAAU,EAC3B,EAAE,MAAM,EAAE,GAAE;IAAE,MAAM,CAAC,EAAE,UAAU,CAAA;CAAO,GACvC,OAAO,CAOT;AAED,0EAA0E;AAC1E,wBAAgB,kBAAkB,CAChC,MAAM,EAAE,cAAc,EACtB,KAAK,EAAE,cAAc,EACrB,UAAU,GAAE,WAAgB,GAC3B,OAAO,CAwBT"}