@baimingtao/lbs-agent 1.0.0

package/extensions/skills/builtin/research/research-paper-writing/templates/iclr2026/iclr2026_conference.sty

@@ -0,0 +1,246 @@
+%%%% ICLR Macros (LaTex)
+%%%% Adapted by Hugo Larochelle from the NIPS stylefile Macros
+%%%% Style File
+%%%% Dec 12, 1990   Rev Aug 14, 1991; Sept, 1995; April, 1997; April, 1999; October 2014
+
+% This file can be used with Latex2e whether running in main mode, or
+% 2.09 compatibility mode.
+%
+% If using main mode, you need to include the commands
+%             \documentclass{article}
+%             \usepackage{iclr14submit_e,times}
+%
+
+% Change the overall width of the page.  If these parameters are
+%       changed, they will require corresponding changes in the
+%       maketitle section.
+%
+\usepackage{eso-pic} % used by \AddToShipoutPicture
+\RequirePackage{fancyhdr}
+\RequirePackage{natbib}
+
+% modification to natbib citations
+\setcitestyle{authoryear,round,citesep={;},aysep={,},yysep={;}}
+
+\renewcommand{\topfraction}{0.95}   % let figure take up nearly whole page
+\renewcommand{\textfraction}{0.05}  % let figure take up nearly whole page
+
+% Define iclrfinal, set to true if iclrfinalcopy is defined
+\newif\ificlrfinal
+\iclrfinalfalse
+\def\iclrfinalcopy{\iclrfinaltrue}
+\font\iclrtenhv  = phvb at 8pt
+
+% Specify the dimensions of each page
+
+\setlength{\paperheight}{11in}
+\setlength{\paperwidth}{8.5in}
+
+
+\oddsidemargin .5in    %   Note \oddsidemargin = \evensidemargin
+\evensidemargin .5in
+\marginparwidth 0.07 true in
+%\marginparwidth 0.75 true in
+%\topmargin 0 true pt           % Nominal distance from top of page to top of
+%\topmargin 0.125in
+\topmargin -0.625in
+\addtolength{\headsep}{0.25in}
+\textheight 9.0 true in       % Height of text (including footnotes & figures)
+\textwidth 5.5 true in        % Width of text line.
+\widowpenalty=10000
+\clubpenalty=10000
+
+% \thispagestyle{empty}        \pagestyle{empty}
+\flushbottom \sloppy
+
+% We're never going to need a table of contents, so just flush it to
+% save space --- suggested by drstrip@sandia-2
+\def\addcontentsline#1#2#3{}
+
+% Title stuff, taken from deproc.
+\def\maketitle{\par
+\begingroup
+   \def\thefootnote{\fnsymbol{footnote}}
+   \def\@makefnmark{\hbox to 0pt{$^{\@thefnmark}$\hss}} % for perfect author
+                                                        % name centering
+%   The footnote-mark was overlapping the footnote-text,
+%   added the following to fix this problem               (MK)
+   \long\def\@makefntext##1{\parindent 1em\noindent
+                            \hbox to1.8em{\hss $\m@th ^{\@thefnmark}$}##1}
+   \@maketitle \@thanks
+\endgroup
+\setcounter{footnote}{0}
+\let\maketitle\relax \let\@maketitle\relax
+\gdef\@thanks{}\gdef\@author{}\gdef\@title{}\let\thanks\relax}
+
+% The toptitlebar has been raised to top-justify the first page
+
+\usepackage{fancyhdr}
+\pagestyle{fancy}
+\fancyhead{}
+
+% Title (includes both anonimized and non-anonimized versions)
+\def\@maketitle{\vbox{\hsize\textwidth
+%\linewidth\hsize \vskip 0.1in \toptitlebar \centering
+{\LARGE\sc \@title\par}
+%\bottomtitlebar % \vskip 0.1in %  minus
+\ificlrfinal
+    \lhead{Published as a conference paper at ICLR 2026}
+    \def\And{\end{tabular}\hfil\linebreak[0]\hfil
+            \begin{tabular}[t]{l}\bf\rule{\z@}{24pt}\ignorespaces}%
+  \def\AND{\end{tabular}\hfil\linebreak[4]\hfil
+            \begin{tabular}[t]{l}\bf\rule{\z@}{24pt}\ignorespaces}%
+    \begin{tabular}[t]{l}\bf\rule{\z@}{24pt}\@author\end{tabular}%
+\else
+       \lhead{Under review as a conference paper at ICLR 2026}
+   \def\And{\end{tabular}\hfil\linebreak[0]\hfil
+            \begin{tabular}[t]{l}\bf\rule{\z@}{24pt}\ignorespaces}%
+  \def\AND{\end{tabular}\hfil\linebreak[4]\hfil
+            \begin{tabular}[t]{l}\bf\rule{\z@}{24pt}\ignorespaces}%
+    \begin{tabular}[t]{l}\bf\rule{\z@}{24pt}Anonymous authors\\Paper under double-blind review\end{tabular}%
+\fi
+\vskip 0.3in minus 0.1in}}
+
+\renewenvironment{abstract}{\vskip.075in\centerline{\large\sc
+Abstract}\vspace{0.5ex}\begin{quote}}{\par\end{quote}\vskip 1ex}
+
+% sections with less space
+\def\section{\@startsection {section}{1}{\z@}{-2.0ex plus
+    -0.5ex minus -.2ex}{1.5ex plus 0.3ex
+minus0.2ex}{\large\sc\raggedright}}
+
+\def\subsection{\@startsection{subsection}{2}{\z@}{-1.8ex plus
+-0.5ex minus -.2ex}{0.8ex plus .2ex}{\normalsize\sc\raggedright}}
+\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-1.5ex
+plus      -0.5ex minus -.2ex}{0.5ex plus
+.2ex}{\normalsize\sc\raggedright}}
+\def\paragraph{\@startsection{paragraph}{4}{\z@}{1.5ex plus
+0.5ex minus .2ex}{-1em}{\normalsize\bf}}
+\def\subparagraph{\@startsection{subparagraph}{5}{\z@}{1.5ex plus
+  0.5ex minus .2ex}{-1em}{\normalsize\sc}}
+\def\subsubsubsection{\vskip
+5pt{\noindent\normalsize\rm\raggedright}}
+
+
+% Footnotes
+\footnotesep 6.65pt %
+\skip\footins 9pt plus 4pt minus 2pt
+\def\footnoterule{\kern-3pt \hrule width 12pc \kern 2.6pt }
+\setcounter{footnote}{0}
+
+% Lists and paragraphs
+\parindent 0pt
+\topsep 4pt plus 1pt minus 2pt
+\partopsep 1pt plus 0.5pt minus 0.5pt
+\itemsep 2pt plus 1pt minus 0.5pt
+\parsep 2pt plus 1pt minus 0.5pt
+\parskip .5pc
+
+
+%\leftmargin2em
+\leftmargin3pc
+\leftmargini\leftmargin \leftmarginii 2em
+\leftmarginiii 1.5em \leftmarginiv 1.0em \leftmarginv .5em
+
+%\labelsep \labelsep 5pt
+
+\def\@listi{\leftmargin\leftmargini}
+\def\@listii{\leftmargin\leftmarginii
+   \labelwidth\leftmarginii\advance\labelwidth-\labelsep
+   \topsep 2pt plus 1pt minus 0.5pt
+   \parsep 1pt plus 0.5pt minus 0.5pt
+   \itemsep \parsep}
+\def\@listiii{\leftmargin\leftmarginiii
+    \labelwidth\leftmarginiii\advance\labelwidth-\labelsep
+    \topsep 1pt plus 0.5pt minus 0.5pt
+    \parsep \z@ \partopsep 0.5pt plus 0pt minus 0.5pt
+    \itemsep \topsep}
+\def\@listiv{\leftmargin\leftmarginiv
+     \labelwidth\leftmarginiv\advance\labelwidth-\labelsep}
+\def\@listv{\leftmargin\leftmarginv
+     \labelwidth\leftmarginv\advance\labelwidth-\labelsep}
+\def\@listvi{\leftmargin\leftmarginvi
+     \labelwidth\leftmarginvi\advance\labelwidth-\labelsep}
+
+\abovedisplayskip 7pt plus2pt minus5pt%
+\belowdisplayskip \abovedisplayskip
+\abovedisplayshortskip  0pt plus3pt%
+\belowdisplayshortskip  4pt plus3pt minus3pt%
+
+% Less leading in most fonts (due to the narrow columns)
+% The choices were between 1-pt and 1.5-pt leading
+%\def\@normalsize{\@setsize\normalsize{11pt}\xpt\@xpt} % got rid of @ (MK)
+\def\normalsize{\@setsize\normalsize{11pt}\xpt\@xpt}
+\def\small{\@setsize\small{10pt}\ixpt\@ixpt}
+\def\footnotesize{\@setsize\footnotesize{10pt}\ixpt\@ixpt}
+\def\scriptsize{\@setsize\scriptsize{8pt}\viipt\@viipt}
+\def\tiny{\@setsize\tiny{7pt}\vipt\@vipt}
+\def\large{\@setsize\large{14pt}\xiipt\@xiipt}
+\def\Large{\@setsize\Large{16pt}\xivpt\@xivpt}
+\def\LARGE{\@setsize\LARGE{20pt}\xviipt\@xviipt}
+\def\huge{\@setsize\huge{23pt}\xxpt\@xxpt}
+\def\Huge{\@setsize\Huge{28pt}\xxvpt\@xxvpt}
+
+\def\toptitlebar{\hrule height4pt\vskip .25in\vskip-\parskip}
+
+\def\bottomtitlebar{\vskip .29in\vskip-\parskip\hrule height1pt\vskip
+.09in} %
+%Reduced second vskip to compensate for adding the strut in \@author
+
+
+
+%% % Vertical Ruler
+%% % This code is, largely, from the CVPR 2010 conference style file
+%% % ----- define vruler
+\makeatletter
+\newbox\iclrrulerbox
+\newcount\iclrrulercount
+\newdimen\iclrruleroffset
+\newdimen\cv@lineheight
+\newdimen\cv@boxheight
+\newbox\cv@tmpbox
+\newcount\cv@refno
+\newcount\cv@tot
+% NUMBER with left flushed zeros  \fillzeros[<WIDTH>]<NUMBER>
+\newcount\cv@tmpc@ \newcount\cv@tmpc
+\def\fillzeros[#1]#2{\cv@tmpc@=#2\relax\ifnum\cv@tmpc@<0\cv@tmpc@=-\cv@tmpc@\fi
+\cv@tmpc=1 %
+\loop\ifnum\cv@tmpc@<10 \else \divide\cv@tmpc@ by 10 \advance\cv@tmpc by 1 \fi
+   \ifnum\cv@tmpc@=10\relax\cv@tmpc@=11\relax\fi \ifnum\cv@tmpc@>10 \repeat
+\ifnum#2<0\advance\cv@tmpc1\relax-\fi
+\loop\ifnum\cv@tmpc<#1\relax0\advance\cv@tmpc1\relax\fi \ifnum\cv@tmpc<#1 \repeat
+\cv@tmpc@=#2\relax\ifnum\cv@tmpc@<0\cv@tmpc@=-\cv@tmpc@\fi \relax\the\cv@tmpc@}%
+% \makevruler[<SCALE>][<INITIAL_COUNT>][<STEP>][<DIGITS>][<HEIGHT>]
+\def\makevruler[#1][#2][#3][#4][#5]{\begingroup\offinterlineskip
+\textheight=#5\vbadness=10000\vfuzz=120ex\overfullrule=0pt%
+\global\setbox\iclrrulerbox=\vbox to \textheight{%
+{\parskip=0pt\hfuzz=150em\cv@boxheight=\textheight
+\cv@lineheight=#1\global\iclrrulercount=#2%
+\cv@tot\cv@boxheight\divide\cv@tot\cv@lineheight\advance\cv@tot2%
+\cv@refno1\vskip-\cv@lineheight\vskip1ex%
+\loop\setbox\cv@tmpbox=\hbox to0cm{{\iclrtenhv\hfil\fillzeros[#4]\iclrrulercount}}%
+\ht\cv@tmpbox\cv@lineheight\dp\cv@tmpbox0pt\box\cv@tmpbox\break
+\advance\cv@refno1\global\advance\iclrrulercount#3\relax
+\ifnum\cv@refno<\cv@tot\repeat}}\endgroup}%
+\makeatother
+% ----- end of vruler
+
+% \makevruler[<SCALE>][<INITIAL_COUNT>][<STEP>][<DIGITS>][<HEIGHT>]
+\def\iclrruler#1{\makevruler[12pt][#1][1][3][0.993\textheight]\usebox{\iclrrulerbox}}
+\AddToShipoutPicture{%
+\ificlrfinal\else
+\iclrruleroffset=\textheight
+\advance\iclrruleroffset by -3.7pt
+  \color[rgb]{.7,.7,.7}
+  \AtTextUpperLeft{%
+    \put(\LenToUnit{-35pt},\LenToUnit{-\iclrruleroffset}){%left ruler
+      \iclrruler{\iclrrulercount}}
+  }
+\fi
+}
+% %% To add a vertical bar on the side
+% \AddToShipoutPicture{
+% \AtTextLowerLeft{
+% \hspace*{-1.8cm}
+% \colorbox[rgb]{0.7,0.7,0.7}{\small \parbox[b][\textheight]{0.1cm}{}}}
+% }

package/extensions/skills/builtin/research/research-paper-writing/templates/iclr2026/iclr2026_conference.tex

@@ -0,0 +1,414 @@
+
+\documentclass{article} % For LaTeX2e
+\usepackage{iclr2026_conference,times}
+
+% Optional math commands from https://github.com/goodfeli/dlbook_notation.
+\input{math_commands.tex}
+
+\usepackage{hyperref}
+\usepackage{url}
+
+
+\title{Formatting Instructions for ICLR 2026 \\ Conference Submissions}
+
+% Authors must not appear in the submitted version. They should be hidden
+% as long as the \iclrfinalcopy macro remains commented out below.
+% Non-anonymous submissions will be rejected without review.
+
+\author{Antiquus S.~Hippocampus, Natalia Cerebro \& Amelie P. Amygdale \thanks{ Use footnote for providing further information
+about author (webpage, alternative address)---\emph{not} for acknowledging
+funding agencies.  Funding acknowledgements go at the end of the paper.} \\
+Department of Computer Science\\
+Cranberry-Lemon University\\
+Pittsburgh, PA 15213, USA \\
+\texttt{\{hippo,brain,jen\}@cs.cranberry-lemon.edu} \\
+\And
+Ji Q. Ren \& Yevgeny LeNet \\
+Department of Computational Neuroscience \\
+University of the Witwatersrand \\
+Joburg, South Africa \\
+\texttt{\{robot,net\}@wits.ac.za} \\
+\AND
+Coauthor \\
+Affiliation \\
+Address \\
+\texttt{email}
+}
+
+% The \author macro works with any number of authors. There are two commands
+% used to separate the names and addresses of multiple authors: \And and \AND.
+%
+% Using \And between authors leaves it to \LaTeX{} to determine where to break
+% the lines. Using \AND forces a linebreak at that point. So, if \LaTeX{}
+% puts 3 of 4 authors names on the first line, and the last on the second
+% line, try using \AND instead of \And before the third author name.
+
+\newcommand{\fix}{\marginpar{FIX}}
+\newcommand{\new}{\marginpar{NEW}}
+
+%\iclrfinalcopy % Uncomment for camera-ready version, but NOT for submission.
+\begin{document}
+
+
+\maketitle
+
+\begin{abstract}
+The abstract paragraph should be indented 1/2~inch (3~picas) on both left and
+right-hand margins. Use 10~point type, with a vertical spacing of 11~points.
+The word \textsc{Abstract} must be centered, in small caps, and in point size 12. Two
+line spaces precede the abstract. The abstract must be limited to one
+paragraph.
+\end{abstract}
+
+\section{Submission of conference papers to ICLR 2026}
+
+ICLR requires electronic submissions, processed by
+\url{https://openreview.net/}. See ICLR's website for more instructions.
+
+If your paper is ultimately accepted, the statement {\tt
+  {\textbackslash}iclrfinalcopy} should be inserted to adjust the
+format to the camera ready requirements.
+
+The format for the submissions is a variant of the NeurIPS format.
+Please read carefully the instructions below, and follow them
+faithfully.
+
+\subsection{Style}
+
+Papers to be submitted to ICLR 2026 must be prepared according to the
+instructions presented here.
+
+%% Please note that we have introduced automatic line number generation
+%% into the style file for \LaTeXe. This is to help reviewers
+%% refer to specific lines of the paper when they make their comments. Please do
+%% NOT refer to these line numbers in your paper as they will be removed from the
+%% style file for the final version of accepted papers.
+
+Authors are required to use the ICLR \LaTeX{} style files obtainable at the
+ICLR website. Please make sure you use the current files and
+not previous versions. Tweaking the style files may be grounds for rejection.
+
+\subsection{Retrieval of style files}
+
+The style files for ICLR and other conference information are available online at:
+\begin{center}
+   \url{http://www.iclr.cc/}
+\end{center}
+The file \verb+iclr2026_conference.pdf+ contains these
+instructions and illustrates the
+various formatting requirements your ICLR paper must satisfy.
+Submissions must be made using \LaTeX{} and the style files
+\verb+iclr2026_conference.sty+ and \verb+iclr2026_conference.bst+ (to be used with \LaTeX{}2e). The file
+\verb+iclr2026_conference.tex+ may be used as a ``shell'' for writing your paper. All you
+have to do is replace the author, title, abstract, and text of the paper with
+your own.
+
+The formatting instructions contained in these style files are summarized in
+sections \ref{gen_inst}, \ref{headings}, and \ref{others} below.
+
+\section{General formatting instructions}
+\label{gen_inst}
+
+The text must be confined within a rectangle 5.5~inches (33~picas) wide and
+9~inches (54~picas) long. The left margin is 1.5~inch (9~picas).
+Use 10~point type with a vertical spacing of 11~points. Times New Roman is the
+preferred typeface throughout. Paragraphs are separated by 1/2~line space,
+with no indentation.
+
+Paper title is 17~point, in small caps and left-aligned.
+All pages should start at 1~inch (6~picas) from the top of the page.
+
+Authors' names are
+set in boldface, and each name is placed above its corresponding
+address. The lead author's name is to be listed first, and
+the co-authors' names are set to follow. Authors sharing the
+same address can be on the same line.
+
+Please pay special attention to the instructions in section \ref{others}
+regarding figures, tables, acknowledgments, and references.
+
+
+There will be a strict upper limit of \textbf{9 pages} for the main text of the initial submission, with unlimited additional pages for citations. This limit will be expanded to \textbf{10 pages} for rebuttal/camera ready.
+
+\section{Headings: first level}
+\label{headings}
+
+First level headings are in small caps,
+flush left and in point size 12. One line space before the first level
+heading and 1/2~line space after the first level heading.
+
+\subsection{Headings: second level}
+
+Second level headings are in small caps,
+flush left and in point size 10. One line space before the second level
+heading and 1/2~line space after the second level heading.
+
+\subsubsection{Headings: third level}
+
+Third level headings are in small caps,
+flush left and in point size 10. One line space before the third level
+heading and 1/2~line space after the third level heading.
+
+\section{Citations, figures, tables, references}
+\label{others}
+
+These instructions apply to everyone, regardless of the formatter being used.
+
+\subsection{Citations within the text}
+
+Citations within the text should be based on the \texttt{natbib} package
+and include the authors' last names and year (with the ``et~al.'' construct
+for more than two authors). When the authors or the publication are
+included in the sentence, the citation should not be in parenthesis using \verb|\citet{}| (as
+in ``See \citet{Hinton06} for more information.''). Otherwise, the citation
+should be in parenthesis using \verb|\citep{}| (as in ``Deep learning shows promise to make progress
+towards AI~\citep{Bengio+chapter2007}.'').
+
+The corresponding references are to be listed in alphabetical order of
+authors, in the \textsc{References} section. As to the format of the
+references themselves, any style is acceptable as long as it is used
+consistently.
+
+\subsection{Footnotes}
+
+Indicate footnotes with a number\footnote{Sample of the first footnote} in the
+text. Place the footnotes at the bottom of the page on which they appear.
+Precede the footnote with a horizontal rule of 2~inches
+(12~picas).\footnote{Sample of the second footnote}
+
+\subsection{Figures}
+
+All artwork must be neat, clean, and legible. Lines should be dark
+enough for purposes of reproduction; art work should not be
+hand-drawn. The figure number and caption always appear after the
+figure. Place one line space before the figure caption, and one line
+space after the figure. The figure caption is lower case (except for
+first word and proper nouns); figures are numbered consecutively.
+
+Make sure the figure caption does not get separated from the figure.
+Leave sufficient space to avoid splitting the figure and figure caption.
+
+You may use color figures.
+However, it is best for the
+figure captions and the paper body to make sense if the paper is printed
+either in black/white or in color.
+\begin{figure}[h]
+\begin{center}
+%\framebox[4.0in]{$\;$}
+\fbox{\rule[-.5cm]{0cm}{4cm} \rule[-.5cm]{4cm}{0cm}}
+\end{center}
+\caption{Sample figure caption.}
+\end{figure}
+
+\subsection{Tables}
+
+All tables must be centered, neat, clean and legible. Do not use hand-drawn
+tables. The table number and title always appear before the table. See
+Table~\ref{sample-table}.
+
+Place one line space before the table title, one line space after the table
+title, and one line space after the table. The table title must be lower case
+(except for first word and proper nouns); tables are numbered consecutively.
+
+\begin{table}[t]
+\caption{Sample table title}
+\label{sample-table}
+\begin{center}
+\begin{tabular}{ll}
+\multicolumn{1}{c}{\bf PART}  &\multicolumn{1}{c}{\bf DESCRIPTION}
+\\ \hline \\
+Dendrite         &Input terminal \\
+Axon             &Output terminal \\
+Soma             &Cell body (contains cell nucleus) \\
+\end{tabular}
+\end{center}
+\end{table}
+
+\section{Default Notation}
+
+In an attempt to encourage standardized notation, we have included the
+notation file from the textbook, \textit{Deep Learning}
+\cite{goodfellow2016deep} available at
+\url{https://github.com/goodfeli/dlbook_notation/}.  Use of this style
+is not required and can be disabled by commenting out
+\texttt{math\_commands.tex}.
+
+
+\centerline{\bf Numbers and Arrays}
+\bgroup
+\def\arraystretch{1.5}
+\begin{tabular}{p{1in}p{3.25in}}
+$\displaystyle a$ & A scalar (integer or real)\\
+$\displaystyle \va$ & A vector\\
+$\displaystyle \mA$ & A matrix\\
+$\displaystyle \tA$ & A tensor\\
+$\displaystyle \mI_n$ & Identity matrix with $n$ rows and $n$ columns\\
+$\displaystyle \mI$ & Identity matrix with dimensionality implied by context\\
+$\displaystyle \ve^{(i)}$ & Standard basis vector $[0,\dots,0,1,0,\dots,0]$ with a 1 at position $i$\\
+$\displaystyle \text{diag}(\va)$ & A square, diagonal matrix with diagonal entries given by $\va$\\
+$\displaystyle \ra$ & A scalar random variable\\
+$\displaystyle \rva$ & A vector-valued random variable\\
+$\displaystyle \rmA$ & A matrix-valued random variable\\
+\end{tabular}
+\egroup
+\vspace{0.25cm}
+
+\centerline{\bf Sets and Graphs}
+\bgroup
+\def\arraystretch{1.5}
+
+\begin{tabular}{p{1.25in}p{3.25in}}
+$\displaystyle \sA$ & A set\\
+$\displaystyle \R$ & The set of real numbers \\
+$\displaystyle \{0, 1\}$ & The set containing 0 and 1 \\
+$\displaystyle \{0, 1, \dots, n \}$ & The set of all integers between $0$ and $n$\\
+$\displaystyle [a, b]$ & The real interval including $a$ and $b$\\
+$\displaystyle (a, b]$ & The real interval excluding $a$ but including $b$\\
+$\displaystyle \sA \backslash \sB$ & Set subtraction, i.e., the set containing the elements of $\sA$ that are not in $\sB$\\
+$\displaystyle \gG$ & A graph\\
+$\displaystyle \parents_\gG(\ervx_i)$ & The parents of $\ervx_i$ in $\gG$
+\end{tabular}
+\vspace{0.25cm}
+
+
+\centerline{\bf Indexing}
+\bgroup
+\def\arraystretch{1.5}
+
+\begin{tabular}{p{1.25in}p{3.25in}}
+$\displaystyle \eva_i$ & Element $i$ of vector $\va$, with indexing starting at 1 \\
+$\displaystyle \eva_{-i}$ & All elements of vector $\va$ except for element $i$ \\
+$\displaystyle \emA_{i,j}$ & Element $i, j$ of matrix $\mA$ \\
+$\displaystyle \mA_{i, :}$ & Row $i$ of matrix $\mA$ \\
+$\displaystyle \mA_{:, i}$ & Column $i$ of matrix $\mA$ \\
+$\displaystyle \etA_{i, j, k}$ & Element $(i, j, k)$ of a 3-D tensor $\tA$\\
+$\displaystyle \tA_{:, :, i}$ & 2-D slice of a 3-D tensor\\
+$\displaystyle \erva_i$ & Element $i$ of the random vector $\rva$ \\
+\end{tabular}
+\egroup
+\vspace{0.25cm}
+
+
+\centerline{\bf Calculus}
+\bgroup
+\def\arraystretch{1.5}
+\begin{tabular}{p{1.25in}p{3.25in}}
+% NOTE: the [2ex] on the next line adds extra height to that row of the table.
+% Without that command, the fraction on the first line is too tall and collides
+% with the fraction on the second line.
+$\displaystyle\frac{d y} {d x}$ & Derivative of $y$ with respect to $x$\\ [2ex]
+$\displaystyle \frac{\partial y} {\partial x} $ & Partial derivative of $y$ with respect to $x$ \\
+$\displaystyle \nabla_\vx y $ & Gradient of $y$ with respect to $\vx$ \\
+$\displaystyle \nabla_\mX y $ & Matrix derivatives of $y$ with respect to $\mX$ \\
+$\displaystyle \nabla_\tX y $ & Tensor containing derivatives of $y$ with respect to $\tX$ \\
+$\displaystyle \frac{\partial f}{\partial \vx} $ & Jacobian matrix $\mJ \in \R^{m\times n}$ of $f: \R^n \rightarrow \R^m$\\
+$\displaystyle \nabla_\vx^2 f(\vx)\text{ or }\mH( f)(\vx)$ & The Hessian matrix of $f$ at input point $\vx$\\
+$\displaystyle \int f(\vx) d\vx $ & Definite integral over the entire domain of $\vx$ \\
+$\displaystyle \int_\sS f(\vx) d\vx$ & Definite integral with respect to $\vx$ over the set $\sS$ \\
+\end{tabular}
+\egroup
+\vspace{0.25cm}
+
+\centerline{\bf Probability and Information Theory}
+\bgroup
+\def\arraystretch{1.5}
+\begin{tabular}{p{1.25in}p{3.25in}}
+$\displaystyle P(\ra)$ & A probability distribution over a discrete variable\\
+$\displaystyle p(\ra)$ & A probability distribution over a continuous variable, or over
+a variable whose type has not been specified\\
+$\displaystyle \ra \sim P$ & Random variable $\ra$ has distribution $P$\\% so thing on left of \sim should always be a random variable, with name beginning with \r
+$\displaystyle  \E_{\rx\sim P} [ f(x) ]\text{ or } \E f(x)$ & Expectation of $f(x)$ with respect to $P(\rx)$ \\
+$\displaystyle \Var(f(x)) $ &  Variance of $f(x)$ under $P(\rx)$ \\
+$\displaystyle \Cov(f(x),g(x)) $ & Covariance of $f(x)$ and $g(x)$ under $P(\rx)$\\
+$\displaystyle H(\rx) $ & Shannon entropy of the random variable $\rx$\\
+$\displaystyle \KL ( P \Vert Q ) $ & Kullback-Leibler divergence of P and Q \\
+$\displaystyle \mathcal{N} ( \vx ; \vmu , \mSigma)$ & Gaussian distribution %
+over $\vx$ with mean $\vmu$ and covariance $\mSigma$ \\
+\end{tabular}
+\egroup
+\vspace{0.25cm}
+
+\centerline{\bf Functions}
+\bgroup
+\def\arraystretch{1.5}
+\begin{tabular}{p{1.25in}p{3.25in}}
+$\displaystyle f: \sA \rightarrow \sB$ & The function $f$ with domain $\sA$ and range $\sB$\\
+$\displaystyle f \circ g $ & Composition of the functions $f$ and $g$ \\
+  $\displaystyle f(\vx ; \vtheta) $ & A function of $\vx$ parametrized by $\vtheta$.
+  (Sometimes we write $f(\vx)$ and omit the argument $\vtheta$ to lighten notation) \\
+$\displaystyle \log x$ & Natural logarithm of $x$ \\
+$\displaystyle \sigma(x)$ & Logistic sigmoid, $\displaystyle \frac{1} {1 + \exp(-x)}$ \\
+$\displaystyle \zeta(x)$ & Softplus, $\log(1 + \exp(x))$ \\
+$\displaystyle || \vx ||_p $ & $\normlp$ norm of $\vx$ \\
+$\displaystyle || \vx || $ & $\normltwo$ norm of $\vx$ \\
+$\displaystyle x^+$ & Positive part of $x$, i.e., $\max(0,x)$\\
+$\displaystyle \1_\mathrm{condition}$ & is 1 if the condition is true, 0 otherwise\\
+\end{tabular}
+\egroup
+\vspace{0.25cm}
+
+
+
+\section{Final instructions}
+Do not change any aspects of the formatting parameters in the style files.
+In particular, do not modify the width or length of the rectangle the text
+should fit into, and do not change font sizes (except perhaps in the
+\textsc{References} section; see below). Please note that pages should be
+numbered.
+
+\section{Preparing PostScript or PDF files}
+
+Please prepare PostScript or PDF files with paper size ``US Letter'', and
+not, for example, ``A4''. The -t
+letter option on dvips will produce US Letter files.
+
+Consider directly generating PDF files using \verb+pdflatex+
+(especially if you are a MiKTeX user).
+PDF figures must be substituted for EPS figures, however.
+
+Otherwise, please generate your PostScript and PDF files with the following commands:
+\begin{verbatim}
+dvips mypaper.dvi -t letter -Ppdf -G0 -o mypaper.ps
+ps2pdf mypaper.ps mypaper.pdf
+\end{verbatim}
+
+\subsection{Margins in LaTeX}
+
+Most of the margin problems come from figures positioned by hand using
+\verb+\special+ or other commands. We suggest using the command
+\verb+\includegraphics+
+from the graphicx package. Always specify the figure width as a multiple of
+the line width as in the example below using .eps graphics
+\begin{verbatim}
+   \usepackage[dvips]{graphicx} ...
+   \includegraphics[width=0.8\linewidth]{myfile.eps}
+\end{verbatim}
+or % Apr 2009 addition
+\begin{verbatim}
+   \usepackage[pdftex]{graphicx} ...
+   \includegraphics[width=0.8\linewidth]{myfile.pdf}
+\end{verbatim}
+for .pdf graphics.
+See section~4.4 in the graphics bundle documentation (\url{http://www.ctan.org/tex-archive/macros/latex/required/graphics/grfguide.ps})
+
+A number of width problems arise when LaTeX cannot properly hyphenate a
+line. Please give LaTeX hyphenation hints using the \verb+\-+ command.
+
+\subsubsection*{Author Contributions}
+If you'd like to, you may include  a section for author contributions as is done
+in many journals. This is optional and at the discretion of the authors.
+
+\subsubsection*{Acknowledgments}
+Use unnumbered third level headings for the acknowledgments. All
+acknowledgments, including those to funding agencies, go at the end of the paper.
+
+
+\bibliography{iclr2026_conference}
+\bibliographystyle{iclr2026_conference}
+
+\appendix
+\section{Appendix}
+You may include other additional sections here.
+
+
+\end{document}