@aircast-one/mavlink 3.0.0

package/dist/dialects/ardupilotmega/constants/mav-result.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5,r=6,s=7,x=8,a=9,b=10;export{o as MAV_RESULT_ACCEPTED,r as MAV_RESULT_CANCELLED,x as MAV_RESULT_COMMAND_INT_ONLY,s as MAV_RESULT_COMMAND_LONG_ONLY,a as MAV_RESULT_COMMAND_UNSUPPORTED_MAV_FRAME,c as MAV_RESULT_DENIED,n as MAV_RESULT_FAILED,p as MAV_RESULT_IN_PROGRESS,b as MAV_RESULT_NOT_IN_CONTROL,t as MAV_RESULT_TEMPORARILY_REJECTED,e as MAV_RESULT_UNSUPPORTED};

package/dist/dialects/ardupilotmega/constants/mav-roi.d.ts

@@ -0,0 +1,9 @@
+type MAV_ROI = 0 | 1 | 2 | 3 | 4;
+declare const MAV_ROI_NONE: 0;
+declare const MAV_ROI_WPNEXT: 1;
+declare const MAV_ROI_WPINDEX: 2;
+declare const MAV_ROI_LOCATION: 3;
+declare const MAV_ROI_TARGET: 4;
+
+export { MAV_ROI_LOCATION, MAV_ROI_NONE, MAV_ROI_TARGET, MAV_ROI_WPINDEX, MAV_ROI_WPNEXT };
+export type { MAV_ROI };

package/dist/dialects/ardupilotmega/constants/mav-roi.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4;export{e as MAV_ROI_LOCATION,o as MAV_ROI_NONE,n as MAV_ROI_TARGET,c as MAV_ROI_WPINDEX,t as MAV_ROI_WPNEXT};

package/dist/dialects/ardupilotmega/constants/mav-sensor-orientation.d.ts

@@ -0,0 +1,46 @@
+type MAV_SENSOR_ORIENTATION = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 100;
+declare const MAV_SENSOR_ROTATION_NONE: 0;
+declare const MAV_SENSOR_ROTATION_YAW_45: 1;
+declare const MAV_SENSOR_ROTATION_YAW_90: 2;
+declare const MAV_SENSOR_ROTATION_YAW_135: 3;
+declare const MAV_SENSOR_ROTATION_YAW_180: 4;
+declare const MAV_SENSOR_ROTATION_YAW_225: 5;
+declare const MAV_SENSOR_ROTATION_YAW_270: 6;
+declare const MAV_SENSOR_ROTATION_YAW_315: 7;
+declare const MAV_SENSOR_ROTATION_ROLL_180: 8;
+declare const MAV_SENSOR_ROTATION_ROLL_180_YAW_45: 9;
+declare const MAV_SENSOR_ROTATION_ROLL_180_YAW_90: 10;
+declare const MAV_SENSOR_ROTATION_ROLL_180_YAW_135: 11;
+declare const MAV_SENSOR_ROTATION_PITCH_180: 12;
+declare const MAV_SENSOR_ROTATION_ROLL_180_YAW_225: 13;
+declare const MAV_SENSOR_ROTATION_ROLL_180_YAW_270: 14;
+declare const MAV_SENSOR_ROTATION_ROLL_180_YAW_315: 15;
+declare const MAV_SENSOR_ROTATION_ROLL_90: 16;
+declare const MAV_SENSOR_ROTATION_ROLL_90_YAW_45: 17;
+declare const MAV_SENSOR_ROTATION_ROLL_90_YAW_90: 18;
+declare const MAV_SENSOR_ROTATION_ROLL_90_YAW_135: 19;
+declare const MAV_SENSOR_ROTATION_ROLL_270: 20;
+declare const MAV_SENSOR_ROTATION_ROLL_270_YAW_45: 21;
+declare const MAV_SENSOR_ROTATION_ROLL_270_YAW_90: 22;
+declare const MAV_SENSOR_ROTATION_ROLL_270_YAW_135: 23;
+declare const MAV_SENSOR_ROTATION_PITCH_90: 24;
+declare const MAV_SENSOR_ROTATION_PITCH_270: 25;
+declare const MAV_SENSOR_ROTATION_PITCH_180_YAW_90: 26;
+declare const MAV_SENSOR_ROTATION_PITCH_180_YAW_270: 27;
+declare const MAV_SENSOR_ROTATION_ROLL_90_PITCH_90: 28;
+declare const MAV_SENSOR_ROTATION_ROLL_180_PITCH_90: 29;
+declare const MAV_SENSOR_ROTATION_ROLL_270_PITCH_90: 30;
+declare const MAV_SENSOR_ROTATION_ROLL_90_PITCH_180: 31;
+declare const MAV_SENSOR_ROTATION_ROLL_270_PITCH_180: 32;
+declare const MAV_SENSOR_ROTATION_ROLL_90_PITCH_270: 33;
+declare const MAV_SENSOR_ROTATION_ROLL_180_PITCH_270: 34;
+declare const MAV_SENSOR_ROTATION_ROLL_270_PITCH_270: 35;
+declare const MAV_SENSOR_ROTATION_ROLL_90_PITCH_180_YAW_90: 36;
+declare const MAV_SENSOR_ROTATION_ROLL_90_YAW_270: 37;
+declare const MAV_SENSOR_ROTATION_ROLL_90_PITCH_68_YAW_293: 38;
+declare const MAV_SENSOR_ROTATION_PITCH_315: 39;
+declare const MAV_SENSOR_ROTATION_ROLL_90_PITCH_315: 40;
+declare const MAV_SENSOR_ROTATION_CUSTOM: 100;
+
+export { MAV_SENSOR_ROTATION_CUSTOM, MAV_SENSOR_ROTATION_NONE, MAV_SENSOR_ROTATION_PITCH_180, MAV_SENSOR_ROTATION_PITCH_180_YAW_270, MAV_SENSOR_ROTATION_PITCH_180_YAW_90, MAV_SENSOR_ROTATION_PITCH_270, MAV_SENSOR_ROTATION_PITCH_315, MAV_SENSOR_ROTATION_PITCH_90, MAV_SENSOR_ROTATION_ROLL_180, MAV_SENSOR_ROTATION_ROLL_180_PITCH_270, MAV_SENSOR_ROTATION_ROLL_180_PITCH_90, MAV_SENSOR_ROTATION_ROLL_180_YAW_135, MAV_SENSOR_ROTATION_ROLL_180_YAW_225, MAV_SENSOR_ROTATION_ROLL_180_YAW_270, MAV_SENSOR_ROTATION_ROLL_180_YAW_315, MAV_SENSOR_ROTATION_ROLL_180_YAW_45, MAV_SENSOR_ROTATION_ROLL_180_YAW_90, MAV_SENSOR_ROTATION_ROLL_270, MAV_SENSOR_ROTATION_ROLL_270_PITCH_180, MAV_SENSOR_ROTATION_ROLL_270_PITCH_270, MAV_SENSOR_ROTATION_ROLL_270_PITCH_90, MAV_SENSOR_ROTATION_ROLL_270_YAW_135, MAV_SENSOR_ROTATION_ROLL_270_YAW_45, MAV_SENSOR_ROTATION_ROLL_270_YAW_90, MAV_SENSOR_ROTATION_ROLL_90, MAV_SENSOR_ROTATION_ROLL_90_PITCH_180, MAV_SENSOR_ROTATION_ROLL_90_PITCH_180_YAW_90, MAV_SENSOR_ROTATION_ROLL_90_PITCH_270, MAV_SENSOR_ROTATION_ROLL_90_PITCH_315, MAV_SENSOR_ROTATION_ROLL_90_PITCH_68_YAW_293, MAV_SENSOR_ROTATION_ROLL_90_PITCH_90, MAV_SENSOR_ROTATION_ROLL_90_YAW_135, MAV_SENSOR_ROTATION_ROLL_90_YAW_270, MAV_SENSOR_ROTATION_ROLL_90_YAW_45, MAV_SENSOR_ROTATION_ROLL_90_YAW_90, MAV_SENSOR_ROTATION_YAW_135, MAV_SENSOR_ROTATION_YAW_180, MAV_SENSOR_ROTATION_YAW_225, MAV_SENSOR_ROTATION_YAW_270, MAV_SENSOR_ROTATION_YAW_315, MAV_SENSOR_ROTATION_YAW_45, MAV_SENSOR_ROTATION_YAW_90 };
+export type { MAV_SENSOR_ORIENTATION };

package/dist/dialects/ardupilotmega/constants/mav-sensor-orientation.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5,r=6,s=7,x=8,a=9,b=10,d=11,f=12,g=13,h=14,i=15,j=16,k=17,l=18,m=19,q=20,u=21,v=22,w=23,y=24,z=25,A=26,B=27,C=28,D=29,E=30,F=31,G=32,H=33,I=34,J=35,K=36,L=37,M=38,N=39,O=40,P=100;export{P as MAV_SENSOR_ROTATION_CUSTOM,o as MAV_SENSOR_ROTATION_NONE,f as MAV_SENSOR_ROTATION_PITCH_180,B as MAV_SENSOR_ROTATION_PITCH_180_YAW_270,A as MAV_SENSOR_ROTATION_PITCH_180_YAW_90,z as MAV_SENSOR_ROTATION_PITCH_270,N as MAV_SENSOR_ROTATION_PITCH_315,y as MAV_SENSOR_ROTATION_PITCH_90,x as MAV_SENSOR_ROTATION_ROLL_180,I as MAV_SENSOR_ROTATION_ROLL_180_PITCH_270,D as MAV_SENSOR_ROTATION_ROLL_180_PITCH_90,d as MAV_SENSOR_ROTATION_ROLL_180_YAW_135,g as MAV_SENSOR_ROTATION_ROLL_180_YAW_225,h as MAV_SENSOR_ROTATION_ROLL_180_YAW_270,i as MAV_SENSOR_ROTATION_ROLL_180_YAW_315,a as MAV_SENSOR_ROTATION_ROLL_180_YAW_45,b as MAV_SENSOR_ROTATION_ROLL_180_YAW_90,q as MAV_SENSOR_ROTATION_ROLL_270,G as MAV_SENSOR_ROTATION_ROLL_270_PITCH_180,J as MAV_SENSOR_ROTATION_ROLL_270_PITCH_270,E as MAV_SENSOR_ROTATION_ROLL_270_PITCH_90,w as MAV_SENSOR_ROTATION_ROLL_270_YAW_135,u as MAV_SENSOR_ROTATION_ROLL_270_YAW_45,v as MAV_SENSOR_ROTATION_ROLL_270_YAW_90,j as MAV_SENSOR_ROTATION_ROLL_90,F as MAV_SENSOR_ROTATION_ROLL_90_PITCH_180,K as MAV_SENSOR_ROTATION_ROLL_90_PITCH_180_YAW_90,H as MAV_SENSOR_ROTATION_ROLL_90_PITCH_270,O as MAV_SENSOR_ROTATION_ROLL_90_PITCH_315,M as MAV_SENSOR_ROTATION_ROLL_90_PITCH_68_YAW_293,C as MAV_SENSOR_ROTATION_ROLL_90_PITCH_90,m as MAV_SENSOR_ROTATION_ROLL_90_YAW_135,L as MAV_SENSOR_ROTATION_ROLL_90_YAW_270,k as MAV_SENSOR_ROTATION_ROLL_90_YAW_45,l as MAV_SENSOR_ROTATION_ROLL_90_YAW_90,e as MAV_SENSOR_ROTATION_YAW_135,n as MAV_SENSOR_ROTATION_YAW_180,p as MAV_SENSOR_ROTATION_YAW_225,r as MAV_SENSOR_ROTATION_YAW_270,s as MAV_SENSOR_ROTATION_YAW_315,t as MAV_SENSOR_ROTATION_YAW_45,c as MAV_SENSOR_ROTATION_YAW_90};

package/dist/dialects/ardupilotmega/constants/mav-severity.d.ts

@@ -0,0 +1,12 @@
+type MAV_SEVERITY = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7;
+declare const MAV_SEVERITY_EMERGENCY: 0;
+declare const MAV_SEVERITY_ALERT: 1;
+declare const MAV_SEVERITY_CRITICAL: 2;
+declare const MAV_SEVERITY_ERROR: 3;
+declare const MAV_SEVERITY_WARNING: 4;
+declare const MAV_SEVERITY_NOTICE: 5;
+declare const MAV_SEVERITY_INFO: 6;
+declare const MAV_SEVERITY_DEBUG: 7;
+
+export { MAV_SEVERITY_ALERT, MAV_SEVERITY_CRITICAL, MAV_SEVERITY_DEBUG, MAV_SEVERITY_EMERGENCY, MAV_SEVERITY_ERROR, MAV_SEVERITY_INFO, MAV_SEVERITY_NOTICE, MAV_SEVERITY_WARNING };
+export type { MAV_SEVERITY };

package/dist/dialects/ardupilotmega/constants/mav-severity.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5,r=6,s=7;export{t as MAV_SEVERITY_ALERT,c as MAV_SEVERITY_CRITICAL,s as MAV_SEVERITY_DEBUG,o as MAV_SEVERITY_EMERGENCY,e as MAV_SEVERITY_ERROR,r as MAV_SEVERITY_INFO,p as MAV_SEVERITY_NOTICE,n as MAV_SEVERITY_WARNING};

package/dist/dialects/ardupilotmega/constants/mav-standard-mode.d.ts

@@ -0,0 +1,13 @@
+type MAV_STANDARD_MODE = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8;
+declare const MAV_STANDARD_MODE_NON_STANDARD: 0;
+declare const MAV_STANDARD_MODE_POSITION_HOLD: 1;
+declare const MAV_STANDARD_MODE_ORBIT: 2;
+declare const MAV_STANDARD_MODE_CRUISE: 3;
+declare const MAV_STANDARD_MODE_ALTITUDE_HOLD: 4;
+declare const MAV_STANDARD_MODE_SAFE_RECOVERY: 5;
+declare const MAV_STANDARD_MODE_MISSION: 6;
+declare const MAV_STANDARD_MODE_LAND: 7;
+declare const MAV_STANDARD_MODE_TAKEOFF: 8;
+
+export { MAV_STANDARD_MODE_ALTITUDE_HOLD, MAV_STANDARD_MODE_CRUISE, MAV_STANDARD_MODE_LAND, MAV_STANDARD_MODE_MISSION, MAV_STANDARD_MODE_NON_STANDARD, MAV_STANDARD_MODE_ORBIT, MAV_STANDARD_MODE_POSITION_HOLD, MAV_STANDARD_MODE_SAFE_RECOVERY, MAV_STANDARD_MODE_TAKEOFF };
+export type { MAV_STANDARD_MODE };

package/dist/dialects/ardupilotmega/constants/mav-standard-mode.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5,r=6,s=7,x=8;export{n as MAV_STANDARD_MODE_ALTITUDE_HOLD,e as MAV_STANDARD_MODE_CRUISE,s as MAV_STANDARD_MODE_LAND,r as MAV_STANDARD_MODE_MISSION,o as MAV_STANDARD_MODE_NON_STANDARD,c as MAV_STANDARD_MODE_ORBIT,t as MAV_STANDARD_MODE_POSITION_HOLD,p as MAV_STANDARD_MODE_SAFE_RECOVERY,x as MAV_STANDARD_MODE_TAKEOFF};

package/dist/dialects/ardupilotmega/constants/mav-state.d.ts

@@ -0,0 +1,13 @@
+type MAV_STATE = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8;
+declare const MAV_STATE_UNINIT: 0;
+declare const MAV_STATE_BOOT: 1;
+declare const MAV_STATE_CALIBRATING: 2;
+declare const MAV_STATE_STANDBY: 3;
+declare const MAV_STATE_ACTIVE: 4;
+declare const MAV_STATE_CRITICAL: 5;
+declare const MAV_STATE_EMERGENCY: 6;
+declare const MAV_STATE_POWEROFF: 7;
+declare const MAV_STATE_FLIGHT_TERMINATION: 8;
+
+export { MAV_STATE_ACTIVE, MAV_STATE_BOOT, MAV_STATE_CALIBRATING, MAV_STATE_CRITICAL, MAV_STATE_EMERGENCY, MAV_STATE_FLIGHT_TERMINATION, MAV_STATE_POWEROFF, MAV_STATE_STANDBY, MAV_STATE_UNINIT };
+export type { MAV_STATE };

package/dist/dialects/ardupilotmega/constants/mav-state.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5,r=6,s=7,x=8;export{n as MAV_STATE_ACTIVE,t as MAV_STATE_BOOT,c as MAV_STATE_CALIBRATING,p as MAV_STATE_CRITICAL,r as MAV_STATE_EMERGENCY,x as MAV_STATE_FLIGHT_TERMINATION,s as MAV_STATE_POWEROFF,e as MAV_STATE_STANDBY,o as MAV_STATE_UNINIT};

package/dist/dialects/ardupilotmega/constants/mav-sys-status-sensor-extended.d.ts

@@ -0,0 +1,6 @@
+type MAV_SYS_STATUS_SENSOR_EXTENDED = 1 | 2;
+declare const MAV_SYS_STATUS_RECOVERY_SYSTEM: 1;
+declare const MAV_SYS_STATUS_SENSOR_LEAK: 2;
+
+export { MAV_SYS_STATUS_RECOVERY_SYSTEM, MAV_SYS_STATUS_SENSOR_LEAK };
+export type { MAV_SYS_STATUS_SENSOR_EXTENDED };

package/dist/dialects/ardupilotmega/constants/mav-sys-status-sensor-extended.js

@@ -0,0 +1 @@
+const o=1,t=2;export{o as MAV_SYS_STATUS_RECOVERY_SYSTEM,t as MAV_SYS_STATUS_SENSOR_LEAK};

package/dist/dialects/ardupilotmega/constants/mav-sys-status-sensor.d.ts

@@ -0,0 +1,36 @@
+type MAV_SYS_STATUS_SENSOR = 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 | 16384 | 32768 | 65536 | 131072 | 262144 | 524288 | 1048576 | 2097152 | 4194304 | 8388608 | 16777216 | 33554432 | 67108864 | 134217728 | 268435456 | 536870912 | 1073741824 | 2147483648;
+declare const MAV_SYS_STATUS_SENSOR_3D_GYRO: 1;
+declare const MAV_SYS_STATUS_SENSOR_3D_ACCEL: 2;
+declare const MAV_SYS_STATUS_SENSOR_3D_MAG: 4;
+declare const MAV_SYS_STATUS_SENSOR_ABSOLUTE_PRESSURE: 8;
+declare const MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE: 16;
+declare const MAV_SYS_STATUS_SENSOR_GPS: 32;
+declare const MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW: 64;
+declare const MAV_SYS_STATUS_SENSOR_VISION_POSITION: 128;
+declare const MAV_SYS_STATUS_SENSOR_LASER_POSITION: 256;
+declare const MAV_SYS_STATUS_SENSOR_EXTERNAL_GROUND_TRUTH: 512;
+declare const MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL: 1024;
+declare const MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION: 2048;
+declare const MAV_SYS_STATUS_SENSOR_YAW_POSITION: 4096;
+declare const MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL: 8192;
+declare const MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL: 16384;
+declare const MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS: 32768;
+declare const MAV_SYS_STATUS_SENSOR_RC_RECEIVER: 65536;
+declare const MAV_SYS_STATUS_SENSOR_3D_GYRO2: 131072;
+declare const MAV_SYS_STATUS_SENSOR_3D_ACCEL2: 262144;
+declare const MAV_SYS_STATUS_SENSOR_3D_MAG2: 524288;
+declare const MAV_SYS_STATUS_GEOFENCE: 1048576;
+declare const MAV_SYS_STATUS_AHRS: 2097152;
+declare const MAV_SYS_STATUS_TERRAIN: 4194304;
+declare const MAV_SYS_STATUS_REVERSE_MOTOR: 8388608;
+declare const MAV_SYS_STATUS_LOGGING: 16777216;
+declare const MAV_SYS_STATUS_SENSOR_BATTERY: 33554432;
+declare const MAV_SYS_STATUS_SENSOR_PROXIMITY: 67108864;
+declare const MAV_SYS_STATUS_SENSOR_SATCOM: 134217728;
+declare const MAV_SYS_STATUS_PREARM_CHECK: 268435456;
+declare const MAV_SYS_STATUS_OBSTACLE_AVOIDANCE: 536870912;
+declare const MAV_SYS_STATUS_SENSOR_PROPULSION: 1073741824;
+declare const MAV_SYS_STATUS_EXTENSION_USED: 2147483648;
+
+export { MAV_SYS_STATUS_AHRS, MAV_SYS_STATUS_EXTENSION_USED, MAV_SYS_STATUS_GEOFENCE, MAV_SYS_STATUS_LOGGING, MAV_SYS_STATUS_OBSTACLE_AVOIDANCE, MAV_SYS_STATUS_PREARM_CHECK, MAV_SYS_STATUS_REVERSE_MOTOR, MAV_SYS_STATUS_SENSOR_3D_ACCEL, MAV_SYS_STATUS_SENSOR_3D_ACCEL2, MAV_SYS_STATUS_SENSOR_3D_GYRO, MAV_SYS_STATUS_SENSOR_3D_GYRO2, MAV_SYS_STATUS_SENSOR_3D_MAG, MAV_SYS_STATUS_SENSOR_3D_MAG2, MAV_SYS_STATUS_SENSOR_ABSOLUTE_PRESSURE, MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL, MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION, MAV_SYS_STATUS_SENSOR_BATTERY, MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE, MAV_SYS_STATUS_SENSOR_EXTERNAL_GROUND_TRUTH, MAV_SYS_STATUS_SENSOR_GPS, MAV_SYS_STATUS_SENSOR_LASER_POSITION, MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS, MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW, MAV_SYS_STATUS_SENSOR_PROPULSION, MAV_SYS_STATUS_SENSOR_PROXIMITY, MAV_SYS_STATUS_SENSOR_RC_RECEIVER, MAV_SYS_STATUS_SENSOR_SATCOM, MAV_SYS_STATUS_SENSOR_VISION_POSITION, MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL, MAV_SYS_STATUS_SENSOR_YAW_POSITION, MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL, MAV_SYS_STATUS_TERRAIN };
+export type { MAV_SYS_STATUS_SENSOR };

package/dist/dialects/ardupilotmega/constants/mav-sys-status-sensor.js

@@ -0,0 +1 @@
+const o=1,t=2,c=4,e=8,n=16,p=32,r=64,s=128,x=256,a=512,b=1024,d=2048,f=4096,g=8192,h=16384,i=32768,j=65536,k=131072,l=262144,m=524288,q=1048576,u=2097152,v=4194304,w=8388608,y=16777216,z=33554432,A=67108864,B=134217728,C=268435456,D=536870912,E=1073741824,F=2147483648;export{u as MAV_SYS_STATUS_AHRS,F as MAV_SYS_STATUS_EXTENSION_USED,q as MAV_SYS_STATUS_GEOFENCE,y as MAV_SYS_STATUS_LOGGING,D as MAV_SYS_STATUS_OBSTACLE_AVOIDANCE,C as MAV_SYS_STATUS_PREARM_CHECK,w as MAV_SYS_STATUS_REVERSE_MOTOR,t as MAV_SYS_STATUS_SENSOR_3D_ACCEL,l as MAV_SYS_STATUS_SENSOR_3D_ACCEL2,o as MAV_SYS_STATUS_SENSOR_3D_GYRO,k as MAV_SYS_STATUS_SENSOR_3D_GYRO2,c as MAV_SYS_STATUS_SENSOR_3D_MAG,m as MAV_SYS_STATUS_SENSOR_3D_MAG2,e as MAV_SYS_STATUS_SENSOR_ABSOLUTE_PRESSURE,b as MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL,d as MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION,z as MAV_SYS_STATUS_SENSOR_BATTERY,n as MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE,a as MAV_SYS_STATUS_SENSOR_EXTERNAL_GROUND_TRUTH,p as MAV_SYS_STATUS_SENSOR_GPS,x as MAV_SYS_STATUS_SENSOR_LASER_POSITION,i as MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS,r as MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW,E as MAV_SYS_STATUS_SENSOR_PROPULSION,A as MAV_SYS_STATUS_SENSOR_PROXIMITY,j as MAV_SYS_STATUS_SENSOR_RC_RECEIVER,B as MAV_SYS_STATUS_SENSOR_SATCOM,s as MAV_SYS_STATUS_SENSOR_VISION_POSITION,h as MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL,f as MAV_SYS_STATUS_SENSOR_YAW_POSITION,g as MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL,v as MAV_SYS_STATUS_TERRAIN};

package/dist/dialects/ardupilotmega/constants/mav-tunnel-payload-type.d.ts

@@ -0,0 +1,18 @@
+type MAV_TUNNEL_PAYLOAD_TYPE = 0 | 200 | 201 | 202 | 203 | 204 | 205 | 206 | 207 | 208 | 209 | 210 | 211 | 212;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_UNKNOWN: 0;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED0: 200;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED1: 201;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED2: 202;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED3: 203;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED4: 204;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED5: 205;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED6: 206;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED7: 207;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED8: 208;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED9: 209;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_REMOTE_OSD: 210;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_ESC_UART_PASSTHRU: 211;
+declare const MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_IO_UART_PASSTHRU: 212;
+
+export { MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_ESC_UART_PASSTHRU, MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_IO_UART_PASSTHRU, MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_REMOTE_OSD, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED0, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED1, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED2, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED3, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED4, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED5, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED6, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED7, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED8, MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED9, MAV_TUNNEL_PAYLOAD_TYPE_UNKNOWN };
+export type { MAV_TUNNEL_PAYLOAD_TYPE };

package/dist/dialects/ardupilotmega/constants/mav-tunnel-payload-type.js

@@ -0,0 +1 @@
+const o=0,t=200,c=201,e=202,n=203,p=204,r=205,s=206,x=207,a=208,b=209,d=210,f=211,g=212;export{f as MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_ESC_UART_PASSTHRU,g as MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_IO_UART_PASSTHRU,d as MAV_TUNNEL_PAYLOAD_TYPE_MODALAI_REMOTE_OSD,t as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED0,c as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED1,e as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED2,n as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED3,p as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED4,r as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED5,s as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED6,x as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED7,a as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED8,b as MAV_TUNNEL_PAYLOAD_TYPE_STORM32_RESERVED9,o as MAV_TUNNEL_PAYLOAD_TYPE_UNKNOWN};

package/dist/dialects/ardupilotmega/constants/mav-type.d.ts

@@ -0,0 +1,54 @@
+type MAV_TYPE = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49;
+declare const MAV_TYPE_GENERIC: 0;
+declare const MAV_TYPE_FIXED_WING: 1;
+declare const MAV_TYPE_QUADROTOR: 2;
+declare const MAV_TYPE_COAXIAL: 3;
+declare const MAV_TYPE_HELICOPTER: 4;
+declare const MAV_TYPE_ANTENNA_TRACKER: 5;
+declare const MAV_TYPE_GCS: 6;
+declare const MAV_TYPE_AIRSHIP: 7;
+declare const MAV_TYPE_FREE_BALLOON: 8;
+declare const MAV_TYPE_ROCKET: 9;
+declare const MAV_TYPE_GROUND_ROVER: 10;
+declare const MAV_TYPE_SURFACE_BOAT: 11;
+declare const MAV_TYPE_SUBMARINE: 12;
+declare const MAV_TYPE_HEXAROTOR: 13;
+declare const MAV_TYPE_OCTOROTOR: 14;
+declare const MAV_TYPE_TRICOPTER: 15;
+declare const MAV_TYPE_FLAPPING_WING: 16;
+declare const MAV_TYPE_KITE: 17;
+declare const MAV_TYPE_ONBOARD_CONTROLLER: 18;
+declare const MAV_TYPE_VTOL_TAILSITTER_DUOROTOR: 19;
+declare const MAV_TYPE_VTOL_TAILSITTER_QUADROTOR: 20;
+declare const MAV_TYPE_VTOL_TILTROTOR: 21;
+declare const MAV_TYPE_VTOL_FIXEDROTOR: 22;
+declare const MAV_TYPE_VTOL_TAILSITTER: 23;
+declare const MAV_TYPE_VTOL_TILTWING: 24;
+declare const MAV_TYPE_VTOL_RESERVED5: 25;
+declare const MAV_TYPE_GIMBAL: 26;
+declare const MAV_TYPE_ADSB: 27;
+declare const MAV_TYPE_PARAFOIL: 28;
+declare const MAV_TYPE_DODECAROTOR: 29;
+declare const MAV_TYPE_CAMERA: 30;
+declare const MAV_TYPE_CHARGING_STATION: 31;
+declare const MAV_TYPE_FLARM: 32;
+declare const MAV_TYPE_SERVO: 33;
+declare const MAV_TYPE_ODID: 34;
+declare const MAV_TYPE_DECAROTOR: 35;
+declare const MAV_TYPE_BATTERY: 36;
+declare const MAV_TYPE_PARACHUTE: 37;
+declare const MAV_TYPE_LOG: 38;
+declare const MAV_TYPE_OSD: 39;
+declare const MAV_TYPE_IMU: 40;
+declare const MAV_TYPE_GPS: 41;
+declare const MAV_TYPE_WINCH: 42;
+declare const MAV_TYPE_GENERIC_MULTIROTOR: 43;
+declare const MAV_TYPE_ILLUMINATOR: 44;
+declare const MAV_TYPE_SPACECRAFT_ORBITER: 45;
+declare const MAV_TYPE_GROUND_QUADRUPED: 46;
+declare const MAV_TYPE_VTOL_GYRODYNE: 47;
+declare const MAV_TYPE_GRIPPER: 48;
+declare const MAV_TYPE_RADIO: 49;
+
+export { MAV_TYPE_ADSB, MAV_TYPE_AIRSHIP, MAV_TYPE_ANTENNA_TRACKER, MAV_TYPE_BATTERY, MAV_TYPE_CAMERA, MAV_TYPE_CHARGING_STATION, MAV_TYPE_COAXIAL, MAV_TYPE_DECAROTOR, MAV_TYPE_DODECAROTOR, MAV_TYPE_FIXED_WING, MAV_TYPE_FLAPPING_WING, MAV_TYPE_FLARM, MAV_TYPE_FREE_BALLOON, MAV_TYPE_GCS, MAV_TYPE_GENERIC, MAV_TYPE_GENERIC_MULTIROTOR, MAV_TYPE_GIMBAL, MAV_TYPE_GPS, MAV_TYPE_GRIPPER, MAV_TYPE_GROUND_QUADRUPED, MAV_TYPE_GROUND_ROVER, MAV_TYPE_HELICOPTER, MAV_TYPE_HEXAROTOR, MAV_TYPE_ILLUMINATOR, MAV_TYPE_IMU, MAV_TYPE_KITE, MAV_TYPE_LOG, MAV_TYPE_OCTOROTOR, MAV_TYPE_ODID, MAV_TYPE_ONBOARD_CONTROLLER, MAV_TYPE_OSD, MAV_TYPE_PARACHUTE, MAV_TYPE_PARAFOIL, MAV_TYPE_QUADROTOR, MAV_TYPE_RADIO, MAV_TYPE_ROCKET, MAV_TYPE_SERVO, MAV_TYPE_SPACECRAFT_ORBITER, MAV_TYPE_SUBMARINE, MAV_TYPE_SURFACE_BOAT, MAV_TYPE_TRICOPTER, MAV_TYPE_VTOL_FIXEDROTOR, MAV_TYPE_VTOL_GYRODYNE, MAV_TYPE_VTOL_RESERVED5, MAV_TYPE_VTOL_TAILSITTER, MAV_TYPE_VTOL_TAILSITTER_DUOROTOR, MAV_TYPE_VTOL_TAILSITTER_QUADROTOR, MAV_TYPE_VTOL_TILTROTOR, MAV_TYPE_VTOL_TILTWING, MAV_TYPE_WINCH };
+export type { MAV_TYPE };

package/dist/dialects/ardupilotmega/constants/mav-type.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5,r=6,s=7,x=8,a=9,b=10,d=11,f=12,g=13,h=14,i=15,j=16,k=17,l=18,m=19,q=20,u=21,v=22,w=23,y=24,z=25,A=26,B=27,C=28,D=29,E=30,F=31,G=32,H=33,I=34,J=35,K=36,L=37,M=38,N=39,O=40,P=41,Q=42,R=43,S=44,T=45,U=46,V=47,W=48,X=49;export{B as MAV_TYPE_ADSB,s as MAV_TYPE_AIRSHIP,p as MAV_TYPE_ANTENNA_TRACKER,K as MAV_TYPE_BATTERY,E as MAV_TYPE_CAMERA,F as MAV_TYPE_CHARGING_STATION,e as MAV_TYPE_COAXIAL,J as MAV_TYPE_DECAROTOR,D as MAV_TYPE_DODECAROTOR,t as MAV_TYPE_FIXED_WING,j as MAV_TYPE_FLAPPING_WING,G as MAV_TYPE_FLARM,x as MAV_TYPE_FREE_BALLOON,r as MAV_TYPE_GCS,o as MAV_TYPE_GENERIC,R as MAV_TYPE_GENERIC_MULTIROTOR,A as MAV_TYPE_GIMBAL,P as MAV_TYPE_GPS,W as MAV_TYPE_GRIPPER,U as MAV_TYPE_GROUND_QUADRUPED,b as MAV_TYPE_GROUND_ROVER,n as MAV_TYPE_HELICOPTER,g as MAV_TYPE_HEXAROTOR,S as MAV_TYPE_ILLUMINATOR,O as MAV_TYPE_IMU,k as MAV_TYPE_KITE,M as MAV_TYPE_LOG,h as MAV_TYPE_OCTOROTOR,I as MAV_TYPE_ODID,l as MAV_TYPE_ONBOARD_CONTROLLER,N as MAV_TYPE_OSD,L as MAV_TYPE_PARACHUTE,C as MAV_TYPE_PARAFOIL,c as MAV_TYPE_QUADROTOR,X as MAV_TYPE_RADIO,a as MAV_TYPE_ROCKET,H as MAV_TYPE_SERVO,T as MAV_TYPE_SPACECRAFT_ORBITER,f as MAV_TYPE_SUBMARINE,d as MAV_TYPE_SURFACE_BOAT,i as MAV_TYPE_TRICOPTER,v as MAV_TYPE_VTOL_FIXEDROTOR,V as MAV_TYPE_VTOL_GYRODYNE,z as MAV_TYPE_VTOL_RESERVED5,w as MAV_TYPE_VTOL_TAILSITTER,m as MAV_TYPE_VTOL_TAILSITTER_DUOROTOR,q as MAV_TYPE_VTOL_TAILSITTER_QUADROTOR,u as MAV_TYPE_VTOL_TILTROTOR,y as MAV_TYPE_VTOL_TILTWING,Q as MAV_TYPE_WINCH};

package/dist/dialects/ardupilotmega/constants/mav-vtol-state.d.ts

@@ -0,0 +1,9 @@
+type MAV_VTOL_STATE = 0 | 1 | 2 | 3 | 4;
+declare const MAV_VTOL_STATE_UNDEFINED: 0;
+declare const MAV_VTOL_STATE_TRANSITION_TO_FW: 1;
+declare const MAV_VTOL_STATE_TRANSITION_TO_MC: 2;
+declare const MAV_VTOL_STATE_MC: 3;
+declare const MAV_VTOL_STATE_FW: 4;
+
+export { MAV_VTOL_STATE_FW, MAV_VTOL_STATE_MC, MAV_VTOL_STATE_TRANSITION_TO_FW, MAV_VTOL_STATE_TRANSITION_TO_MC, MAV_VTOL_STATE_UNDEFINED };
+export type { MAV_VTOL_STATE };

package/dist/dialects/ardupilotmega/constants/mav-vtol-state.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4;export{n as MAV_VTOL_STATE_FW,e as MAV_VTOL_STATE_MC,t as MAV_VTOL_STATE_TRANSITION_TO_FW,c as MAV_VTOL_STATE_TRANSITION_TO_MC,o as MAV_VTOL_STATE_UNDEFINED};

package/dist/dialects/ardupilotmega/constants/mav-winch-status-flag.d.ts

@@ -0,0 +1,18 @@
+type MAV_WINCH_STATUS_FLAG = 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192;
+declare const MAV_WINCH_STATUS_HEALTHY: 1;
+declare const MAV_WINCH_STATUS_FULLY_RETRACTED: 2;
+declare const MAV_WINCH_STATUS_MOVING: 4;
+declare const MAV_WINCH_STATUS_CLUTCH_ENGAGED: 8;
+declare const MAV_WINCH_STATUS_LOCKED: 16;
+declare const MAV_WINCH_STATUS_DROPPING: 32;
+declare const MAV_WINCH_STATUS_ARRESTING: 64;
+declare const MAV_WINCH_STATUS_GROUND_SENSE: 128;
+declare const MAV_WINCH_STATUS_RETRACTING: 256;
+declare const MAV_WINCH_STATUS_REDELIVER: 512;
+declare const MAV_WINCH_STATUS_ABANDON_LINE: 1024;
+declare const MAV_WINCH_STATUS_LOCKING: 2048;
+declare const MAV_WINCH_STATUS_LOAD_LINE: 4096;
+declare const MAV_WINCH_STATUS_LOAD_PAYLOAD: 8192;
+
+export { MAV_WINCH_STATUS_ABANDON_LINE, MAV_WINCH_STATUS_ARRESTING, MAV_WINCH_STATUS_CLUTCH_ENGAGED, MAV_WINCH_STATUS_DROPPING, MAV_WINCH_STATUS_FULLY_RETRACTED, MAV_WINCH_STATUS_GROUND_SENSE, MAV_WINCH_STATUS_HEALTHY, MAV_WINCH_STATUS_LOAD_LINE, MAV_WINCH_STATUS_LOAD_PAYLOAD, MAV_WINCH_STATUS_LOCKED, MAV_WINCH_STATUS_LOCKING, MAV_WINCH_STATUS_MOVING, MAV_WINCH_STATUS_REDELIVER, MAV_WINCH_STATUS_RETRACTING };
+export type { MAV_WINCH_STATUS_FLAG };

package/dist/dialects/ardupilotmega/constants/mav-winch-status-flag.js

@@ -0,0 +1 @@
+const o=1,t=2,c=4,e=8,n=16,p=32,r=64,s=128,x=256,a=512,b=1024,d=2048,f=4096,g=8192;export{b as MAV_WINCH_STATUS_ABANDON_LINE,r as MAV_WINCH_STATUS_ARRESTING,e as MAV_WINCH_STATUS_CLUTCH_ENGAGED,p as MAV_WINCH_STATUS_DROPPING,t as MAV_WINCH_STATUS_FULLY_RETRACTED,s as MAV_WINCH_STATUS_GROUND_SENSE,o as MAV_WINCH_STATUS_HEALTHY,f as MAV_WINCH_STATUS_LOAD_LINE,g as MAV_WINCH_STATUS_LOAD_PAYLOAD,n as MAV_WINCH_STATUS_LOCKED,d as MAV_WINCH_STATUS_LOCKING,c as MAV_WINCH_STATUS_MOVING,a as MAV_WINCH_STATUS_REDELIVER,x as MAV_WINCH_STATUS_RETRACTING};

package/dist/dialects/ardupilotmega/constants/mavlink-data-stream-type.d.ts

@@ -0,0 +1,10 @@
+type MAVLINK_DATA_STREAM_TYPE = 0 | 1 | 2 | 3 | 4 | 5;
+declare const MAVLINK_DATA_STREAM_IMG_JPEG: 0;
+declare const MAVLINK_DATA_STREAM_IMG_BMP: 1;
+declare const MAVLINK_DATA_STREAM_IMG_RAW8U: 2;
+declare const MAVLINK_DATA_STREAM_IMG_RAW32U: 3;
+declare const MAVLINK_DATA_STREAM_IMG_PGM: 4;
+declare const MAVLINK_DATA_STREAM_IMG_PNG: 5;
+
+export { MAVLINK_DATA_STREAM_IMG_BMP, MAVLINK_DATA_STREAM_IMG_JPEG, MAVLINK_DATA_STREAM_IMG_PGM, MAVLINK_DATA_STREAM_IMG_PNG, MAVLINK_DATA_STREAM_IMG_RAW32U, MAVLINK_DATA_STREAM_IMG_RAW8U };
+export type { MAVLINK_DATA_STREAM_TYPE };

package/dist/dialects/ardupilotmega/constants/mavlink-data-stream-type.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5;export{t as MAVLINK_DATA_STREAM_IMG_BMP,o as MAVLINK_DATA_STREAM_IMG_JPEG,n as MAVLINK_DATA_STREAM_IMG_PGM,p as MAVLINK_DATA_STREAM_IMG_PNG,e as MAVLINK_DATA_STREAM_IMG_RAW32U,c as MAVLINK_DATA_STREAM_IMG_RAW8U};

package/dist/dialects/ardupilotmega/constants/mission-state.d.ts

@@ -0,0 +1,10 @@
+type MISSION_STATE = 0 | 1 | 2 | 3 | 4 | 5;
+declare const MISSION_STATE_UNKNOWN: 0;
+declare const MISSION_STATE_NO_MISSION: 1;
+declare const MISSION_STATE_NOT_STARTED: 2;
+declare const MISSION_STATE_ACTIVE: 3;
+declare const MISSION_STATE_PAUSED: 4;
+declare const MISSION_STATE_COMPLETE: 5;
+
+export { MISSION_STATE_ACTIVE, MISSION_STATE_COMPLETE, MISSION_STATE_NOT_STARTED, MISSION_STATE_NO_MISSION, MISSION_STATE_PAUSED, MISSION_STATE_UNKNOWN };
+export type { MISSION_STATE };

package/dist/dialects/ardupilotmega/constants/mission-state.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5;export{e as MISSION_STATE_ACTIVE,p as MISSION_STATE_COMPLETE,c as MISSION_STATE_NOT_STARTED,t as MISSION_STATE_NO_MISSION,n as MISSION_STATE_PAUSED,o as MISSION_STATE_UNKNOWN};

package/dist/dialects/ardupilotmega/constants/motor-test-order.d.ts

@@ -0,0 +1,7 @@
+type MOTOR_TEST_ORDER = 0 | 1 | 2;
+declare const MOTOR_TEST_ORDER_DEFAULT: 0;
+declare const MOTOR_TEST_ORDER_SEQUENCE: 1;
+declare const MOTOR_TEST_ORDER_BOARD: 2;
+
+export { MOTOR_TEST_ORDER_BOARD, MOTOR_TEST_ORDER_DEFAULT, MOTOR_TEST_ORDER_SEQUENCE };
+export type { MOTOR_TEST_ORDER };

package/dist/dialects/ardupilotmega/constants/motor-test-order.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2;export{c as MOTOR_TEST_ORDER_BOARD,o as MOTOR_TEST_ORDER_DEFAULT,t as MOTOR_TEST_ORDER_SEQUENCE};

package/dist/dialects/ardupilotmega/constants/motor-test-throttle-type.d.ts

@@ -0,0 +1,8 @@
+type MOTOR_TEST_THROTTLE_TYPE = 0 | 1 | 2 | 3;
+declare const MOTOR_TEST_THROTTLE_PERCENT: 0;
+declare const MOTOR_TEST_THROTTLE_PWM: 1;
+declare const MOTOR_TEST_THROTTLE_PILOT: 2;
+declare const MOTOR_TEST_COMPASS_CAL: 3;
+
+export { MOTOR_TEST_COMPASS_CAL, MOTOR_TEST_THROTTLE_PERCENT, MOTOR_TEST_THROTTLE_PILOT, MOTOR_TEST_THROTTLE_PWM };
+export type { MOTOR_TEST_THROTTLE_TYPE };

package/dist/dialects/ardupilotmega/constants/motor-test-throttle-type.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3;export{e as MOTOR_TEST_COMPASS_CAL,o as MOTOR_TEST_THROTTLE_PERCENT,c as MOTOR_TEST_THROTTLE_PILOT,t as MOTOR_TEST_THROTTLE_PWM};

package/dist/dialects/ardupilotmega/constants/nav-takeoff-flags.d.ts

@@ -0,0 +1,5 @@
+type NAV_TAKEOFF_FLAGS = 1;
+declare const NAV_TAKEOFF_FLAGS_HORIZONTAL_POSITION_NOT_REQUIRED: 1;
+
+export { NAV_TAKEOFF_FLAGS_HORIZONTAL_POSITION_NOT_REQUIRED };
+export type { NAV_TAKEOFF_FLAGS };

package/dist/dialects/ardupilotmega/constants/nav-takeoff-flags.js

@@ -0,0 +1 @@
+const o=1;export{o as NAV_TAKEOFF_FLAGS_HORIZONTAL_POSITION_NOT_REQUIRED};

package/dist/dialects/ardupilotmega/constants/nav-vtol-land-options.d.ts

@@ -0,0 +1,7 @@
+type NAV_VTOL_LAND_OPTIONS = 0 | 1 | 2;
+declare const NAV_VTOL_LAND_OPTIONS_DEFAULT: 0;
+declare const NAV_VTOL_LAND_OPTIONS_FW_SPIRAL_APPROACH: 1;
+declare const NAV_VTOL_LAND_OPTIONS_FW_APPROACH: 2;
+
+export { NAV_VTOL_LAND_OPTIONS_DEFAULT, NAV_VTOL_LAND_OPTIONS_FW_APPROACH, NAV_VTOL_LAND_OPTIONS_FW_SPIRAL_APPROACH };
+export type { NAV_VTOL_LAND_OPTIONS };

package/dist/dialects/ardupilotmega/constants/nav-vtol-land-options.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2;export{o as NAV_VTOL_LAND_OPTIONS_DEFAULT,c as NAV_VTOL_LAND_OPTIONS_FW_APPROACH,t as NAV_VTOL_LAND_OPTIONS_FW_SPIRAL_APPROACH};

package/dist/dialects/ardupilotmega/constants/orbit-yaw-behaviour.d.ts

@@ -0,0 +1,10 @@
+type ORBIT_YAW_BEHAVIOUR = 0 | 1 | 2 | 3 | 4 | 5;
+declare const ORBIT_YAW_BEHAVIOUR_HOLD_FRONT_TO_CIRCLE_CENTER: 0;
+declare const ORBIT_YAW_BEHAVIOUR_HOLD_INITIAL_HEADING: 1;
+declare const ORBIT_YAW_BEHAVIOUR_UNCONTROLLED: 2;
+declare const ORBIT_YAW_BEHAVIOUR_HOLD_FRONT_TANGENT_TO_CIRCLE: 3;
+declare const ORBIT_YAW_BEHAVIOUR_RC_CONTROLLED: 4;
+declare const ORBIT_YAW_BEHAVIOUR_UNCHANGED: 5;
+
+export { ORBIT_YAW_BEHAVIOUR_HOLD_FRONT_TANGENT_TO_CIRCLE, ORBIT_YAW_BEHAVIOUR_HOLD_FRONT_TO_CIRCLE_CENTER, ORBIT_YAW_BEHAVIOUR_HOLD_INITIAL_HEADING, ORBIT_YAW_BEHAVIOUR_RC_CONTROLLED, ORBIT_YAW_BEHAVIOUR_UNCHANGED, ORBIT_YAW_BEHAVIOUR_UNCONTROLLED };
+export type { ORBIT_YAW_BEHAVIOUR };

package/dist/dialects/ardupilotmega/constants/orbit-yaw-behaviour.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5;export{e as ORBIT_YAW_BEHAVIOUR_HOLD_FRONT_TANGENT_TO_CIRCLE,o as ORBIT_YAW_BEHAVIOUR_HOLD_FRONT_TO_CIRCLE_CENTER,t as ORBIT_YAW_BEHAVIOUR_HOLD_INITIAL_HEADING,n as ORBIT_YAW_BEHAVIOUR_RC_CONTROLLED,p as ORBIT_YAW_BEHAVIOUR_UNCHANGED,c as ORBIT_YAW_BEHAVIOUR_UNCONTROLLED};

package/dist/dialects/ardupilotmega/constants/osd-param-config-error.d.ts

@@ -0,0 +1,8 @@
+type OSD_PARAM_CONFIG_ERROR = 0 | 1 | 2 | 3;
+declare const OSD_PARAM_SUCCESS: 0;
+declare const OSD_PARAM_INVALID_SCREEN: 1;
+declare const OSD_PARAM_INVALID_PARAMETER_INDEX: 2;
+declare const OSD_PARAM_INVALID_PARAMETER: 3;
+
+export { OSD_PARAM_INVALID_PARAMETER, OSD_PARAM_INVALID_PARAMETER_INDEX, OSD_PARAM_INVALID_SCREEN, OSD_PARAM_SUCCESS };
+export type { OSD_PARAM_CONFIG_ERROR };

package/dist/dialects/ardupilotmega/constants/osd-param-config-error.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3;export{e as OSD_PARAM_INVALID_PARAMETER,c as OSD_PARAM_INVALID_PARAMETER_INDEX,t as OSD_PARAM_INVALID_SCREEN,o as OSD_PARAM_SUCCESS};

package/dist/dialects/ardupilotmega/constants/osd-param-config-type.d.ts

@@ -0,0 +1,13 @@
+type OSD_PARAM_CONFIG_TYPE = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8;
+declare const OSD_PARAM_NONE: 0;
+declare const OSD_PARAM_SERIAL_PROTOCOL: 1;
+declare const OSD_PARAM_SERVO_FUNCTION: 2;
+declare const OSD_PARAM_AUX_FUNCTION: 3;
+declare const OSD_PARAM_FLIGHT_MODE: 4;
+declare const OSD_PARAM_FAILSAFE_ACTION: 5;
+declare const OSD_PARAM_FAILSAFE_ACTION_1: 6;
+declare const OSD_PARAM_FAILSAFE_ACTION_2: 7;
+declare const OSD_PARAM_NUM_TYPES: 8;
+
+export { OSD_PARAM_AUX_FUNCTION, OSD_PARAM_FAILSAFE_ACTION, OSD_PARAM_FAILSAFE_ACTION_1, OSD_PARAM_FAILSAFE_ACTION_2, OSD_PARAM_FLIGHT_MODE, OSD_PARAM_NONE, OSD_PARAM_NUM_TYPES, OSD_PARAM_SERIAL_PROTOCOL, OSD_PARAM_SERVO_FUNCTION };
+export type { OSD_PARAM_CONFIG_TYPE };

package/dist/dialects/ardupilotmega/constants/osd-param-config-type.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5,r=6,s=7,x=8;export{e as OSD_PARAM_AUX_FUNCTION,p as OSD_PARAM_FAILSAFE_ACTION,r as OSD_PARAM_FAILSAFE_ACTION_1,s as OSD_PARAM_FAILSAFE_ACTION_2,n as OSD_PARAM_FLIGHT_MODE,o as OSD_PARAM_NONE,x as OSD_PARAM_NUM_TYPES,t as OSD_PARAM_SERIAL_PROTOCOL,c as OSD_PARAM_SERVO_FUNCTION};

package/dist/dialects/ardupilotmega/constants/parachute-action.d.ts

@@ -0,0 +1,7 @@
+type PARACHUTE_ACTION = 0 | 1 | 2;
+declare const PARACHUTE_DISABLE: 0;
+declare const PARACHUTE_ENABLE: 1;
+declare const PARACHUTE_RELEASE: 2;
+
+export { PARACHUTE_DISABLE, PARACHUTE_ENABLE, PARACHUTE_RELEASE };
+export type { PARACHUTE_ACTION };

package/dist/dialects/ardupilotmega/constants/parachute-action.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2;export{o as PARACHUTE_DISABLE,t as PARACHUTE_ENABLE,c as PARACHUTE_RELEASE};

package/dist/dialects/ardupilotmega/constants/param-ack.d.ts

@@ -0,0 +1,8 @@
+type PARAM_ACK = 0 | 1 | 2 | 3;
+declare const PARAM_ACK_ACCEPTED: 0;
+declare const PARAM_ACK_VALUE_UNSUPPORTED: 1;
+declare const PARAM_ACK_FAILED: 2;
+declare const PARAM_ACK_IN_PROGRESS: 3;
+
+export { PARAM_ACK_ACCEPTED, PARAM_ACK_FAILED, PARAM_ACK_IN_PROGRESS, PARAM_ACK_VALUE_UNSUPPORTED };
+export type { PARAM_ACK };

package/dist/dialects/ardupilotmega/constants/param-ack.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3;export{o as PARAM_ACK_ACCEPTED,c as PARAM_ACK_FAILED,e as PARAM_ACK_IN_PROGRESS,t as PARAM_ACK_VALUE_UNSUPPORTED};

package/dist/dialects/ardupilotmega/constants/pid-tuning-axis.d.ts

@@ -0,0 +1,10 @@
+type PID_TUNING_AXIS = 1 | 2 | 3 | 4 | 5 | 6;
+declare const PID_TUNING_ROLL: 1;
+declare const PID_TUNING_PITCH: 2;
+declare const PID_TUNING_YAW: 3;
+declare const PID_TUNING_ACCZ: 4;
+declare const PID_TUNING_STEER: 5;
+declare const PID_TUNING_LANDING: 6;
+
+export { PID_TUNING_ACCZ, PID_TUNING_LANDING, PID_TUNING_PITCH, PID_TUNING_ROLL, PID_TUNING_STEER, PID_TUNING_YAW };
+export type { PID_TUNING_AXIS };

package/dist/dialects/ardupilotmega/constants/pid-tuning-axis.js

@@ -0,0 +1 @@
+const o=1,t=2,c=3,e=4,n=5,p=6;export{e as PID_TUNING_ACCZ,p as PID_TUNING_LANDING,t as PID_TUNING_PITCH,o as PID_TUNING_ROLL,n as PID_TUNING_STEER,c as PID_TUNING_YAW};

package/dist/dialects/ardupilotmega/constants/plane-mode.d.ts

@@ -0,0 +1,30 @@
+type PLANE_MODE = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26;
+declare const PLANE_MODE_MANUAL: 0;
+declare const PLANE_MODE_CIRCLE: 1;
+declare const PLANE_MODE_STABILIZE: 2;
+declare const PLANE_MODE_TRAINING: 3;
+declare const PLANE_MODE_ACRO: 4;
+declare const PLANE_MODE_FLY_BY_WIRE_A: 5;
+declare const PLANE_MODE_FLY_BY_WIRE_B: 6;
+declare const PLANE_MODE_CRUISE: 7;
+declare const PLANE_MODE_AUTOTUNE: 8;
+declare const PLANE_MODE_AUTO: 10;
+declare const PLANE_MODE_RTL: 11;
+declare const PLANE_MODE_LOITER: 12;
+declare const PLANE_MODE_TAKEOFF: 13;
+declare const PLANE_MODE_AVOID_ADSB: 14;
+declare const PLANE_MODE_GUIDED: 15;
+declare const PLANE_MODE_INITIALIZING: 16;
+declare const PLANE_MODE_QSTABILIZE: 17;
+declare const PLANE_MODE_QHOVER: 18;
+declare const PLANE_MODE_QLOITER: 19;
+declare const PLANE_MODE_QLAND: 20;
+declare const PLANE_MODE_QRTL: 21;
+declare const PLANE_MODE_QAUTOTUNE: 22;
+declare const PLANE_MODE_QACRO: 23;
+declare const PLANE_MODE_THERMAL: 24;
+declare const PLANE_MODE_LOITER_ALT_QLAND: 25;
+declare const PLANE_MODE_AUTOLAND: 26;
+
+export { PLANE_MODE_ACRO, PLANE_MODE_AUTO, PLANE_MODE_AUTOLAND, PLANE_MODE_AUTOTUNE, PLANE_MODE_AVOID_ADSB, PLANE_MODE_CIRCLE, PLANE_MODE_CRUISE, PLANE_MODE_FLY_BY_WIRE_A, PLANE_MODE_FLY_BY_WIRE_B, PLANE_MODE_GUIDED, PLANE_MODE_INITIALIZING, PLANE_MODE_LOITER, PLANE_MODE_LOITER_ALT_QLAND, PLANE_MODE_MANUAL, PLANE_MODE_QACRO, PLANE_MODE_QAUTOTUNE, PLANE_MODE_QHOVER, PLANE_MODE_QLAND, PLANE_MODE_QLOITER, PLANE_MODE_QRTL, PLANE_MODE_QSTABILIZE, PLANE_MODE_RTL, PLANE_MODE_STABILIZE, PLANE_MODE_TAKEOFF, PLANE_MODE_THERMAL, PLANE_MODE_TRAINING };
+export type { PLANE_MODE };

package/dist/dialects/ardupilotmega/constants/plane-mode.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=5,r=6,s=7,x=8,a=10,b=11,d=12,f=13,g=14,h=15,i=16,j=17,k=18,l=19,m=20,q=21,u=22,v=23,w=24,y=25,z=26;export{n as PLANE_MODE_ACRO,a as PLANE_MODE_AUTO,z as PLANE_MODE_AUTOLAND,x as PLANE_MODE_AUTOTUNE,g as PLANE_MODE_AVOID_ADSB,t as PLANE_MODE_CIRCLE,s as PLANE_MODE_CRUISE,p as PLANE_MODE_FLY_BY_WIRE_A,r as PLANE_MODE_FLY_BY_WIRE_B,h as PLANE_MODE_GUIDED,i as PLANE_MODE_INITIALIZING,d as PLANE_MODE_LOITER,y as PLANE_MODE_LOITER_ALT_QLAND,o as PLANE_MODE_MANUAL,v as PLANE_MODE_QACRO,u as PLANE_MODE_QAUTOTUNE,k as PLANE_MODE_QHOVER,m as PLANE_MODE_QLAND,l as PLANE_MODE_QLOITER,q as PLANE_MODE_QRTL,j as PLANE_MODE_QSTABILIZE,b as PLANE_MODE_RTL,c as PLANE_MODE_STABILIZE,f as PLANE_MODE_TAKEOFF,w as PLANE_MODE_THERMAL,e as PLANE_MODE_TRAINING};

package/dist/dialects/ardupilotmega/constants/position-target-typemask.d.ts

@@ -0,0 +1,16 @@
+type POSITION_TARGET_TYPEMASK = 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048;
+declare const POSITION_TARGET_TYPEMASK_X_IGNORE: 1;
+declare const POSITION_TARGET_TYPEMASK_Y_IGNORE: 2;
+declare const POSITION_TARGET_TYPEMASK_Z_IGNORE: 4;
+declare const POSITION_TARGET_TYPEMASK_VX_IGNORE: 8;
+declare const POSITION_TARGET_TYPEMASK_VY_IGNORE: 16;
+declare const POSITION_TARGET_TYPEMASK_VZ_IGNORE: 32;
+declare const POSITION_TARGET_TYPEMASK_AX_IGNORE: 64;
+declare const POSITION_TARGET_TYPEMASK_AY_IGNORE: 128;
+declare const POSITION_TARGET_TYPEMASK_AZ_IGNORE: 256;
+declare const POSITION_TARGET_TYPEMASK_FORCE_SET: 512;
+declare const POSITION_TARGET_TYPEMASK_YAW_IGNORE: 1024;
+declare const POSITION_TARGET_TYPEMASK_YAW_RATE_IGNORE: 2048;
+
+export { POSITION_TARGET_TYPEMASK_AX_IGNORE, POSITION_TARGET_TYPEMASK_AY_IGNORE, POSITION_TARGET_TYPEMASK_AZ_IGNORE, POSITION_TARGET_TYPEMASK_FORCE_SET, POSITION_TARGET_TYPEMASK_VX_IGNORE, POSITION_TARGET_TYPEMASK_VY_IGNORE, POSITION_TARGET_TYPEMASK_VZ_IGNORE, POSITION_TARGET_TYPEMASK_X_IGNORE, POSITION_TARGET_TYPEMASK_YAW_IGNORE, POSITION_TARGET_TYPEMASK_YAW_RATE_IGNORE, POSITION_TARGET_TYPEMASK_Y_IGNORE, POSITION_TARGET_TYPEMASK_Z_IGNORE };
+export type { POSITION_TARGET_TYPEMASK };

package/dist/dialects/ardupilotmega/constants/position-target-typemask.js

@@ -0,0 +1 @@
+const o=1,t=2,c=4,e=8,n=16,p=32,r=64,s=128,x=256,a=512,b=1024,d=2048;export{r as POSITION_TARGET_TYPEMASK_AX_IGNORE,s as POSITION_TARGET_TYPEMASK_AY_IGNORE,x as POSITION_TARGET_TYPEMASK_AZ_IGNORE,a as POSITION_TARGET_TYPEMASK_FORCE_SET,e as POSITION_TARGET_TYPEMASK_VX_IGNORE,n as POSITION_TARGET_TYPEMASK_VY_IGNORE,p as POSITION_TARGET_TYPEMASK_VZ_IGNORE,o as POSITION_TARGET_TYPEMASK_X_IGNORE,b as POSITION_TARGET_TYPEMASK_YAW_IGNORE,d as POSITION_TARGET_TYPEMASK_YAW_RATE_IGNORE,t as POSITION_TARGET_TYPEMASK_Y_IGNORE,c as POSITION_TARGET_TYPEMASK_Z_IGNORE};

package/dist/dialects/ardupilotmega/constants/precision-land-mode.d.ts

@@ -0,0 +1,7 @@
+type PRECISION_LAND_MODE = 0 | 1 | 2;
+declare const PRECISION_LAND_MODE_DISABLED: 0;
+declare const PRECISION_LAND_MODE_OPPORTUNISTIC: 1;
+declare const PRECISION_LAND_MODE_REQUIRED: 2;
+
+export { PRECISION_LAND_MODE_DISABLED, PRECISION_LAND_MODE_OPPORTUNISTIC, PRECISION_LAND_MODE_REQUIRED };
+export type { PRECISION_LAND_MODE };

package/dist/dialects/ardupilotmega/constants/precision-land-mode.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2;export{o as PRECISION_LAND_MODE_DISABLED,t as PRECISION_LAND_MODE_OPPORTUNISTIC,c as PRECISION_LAND_MODE_REQUIRED};

package/dist/dialects/ardupilotmega/constants/preflight-calibration-accelerometer.d.ts

@@ -0,0 +1,10 @@
+type PREFLIGHT_CALIBRATION_ACCELEROMETER = 0 | 1 | 2 | 3 | 4 | 76;
+declare const PREFLIGHT_CALIBRATION_ACCELEROMETER_NONE: 0;
+declare const PREFLIGHT_CALIBRATION_ACCELEROMETER_FULL: 1;
+declare const PREFLIGHT_CALIBRATION_ACCELEROMETER_TRIM: 2;
+declare const PREFLIGHT_CALIBRATION_ACCELEROMETER_TEMPERATURE: 3;
+declare const PREFLIGHT_CALIBRATION_ACCELEROMETER_SIMPLE: 4;
+declare const PREFLIGHT_CALIBRATION_ACCELEROMETER_FORCE_SAVE: 76;
+
+export { PREFLIGHT_CALIBRATION_ACCELEROMETER_FORCE_SAVE, PREFLIGHT_CALIBRATION_ACCELEROMETER_FULL, PREFLIGHT_CALIBRATION_ACCELEROMETER_NONE, PREFLIGHT_CALIBRATION_ACCELEROMETER_SIMPLE, PREFLIGHT_CALIBRATION_ACCELEROMETER_TEMPERATURE, PREFLIGHT_CALIBRATION_ACCELEROMETER_TRIM };
+export type { PREFLIGHT_CALIBRATION_ACCELEROMETER };

package/dist/dialects/ardupilotmega/constants/preflight-calibration-accelerometer.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4,p=76;export{p as PREFLIGHT_CALIBRATION_ACCELEROMETER_FORCE_SAVE,t as PREFLIGHT_CALIBRATION_ACCELEROMETER_FULL,o as PREFLIGHT_CALIBRATION_ACCELEROMETER_NONE,n as PREFLIGHT_CALIBRATION_ACCELEROMETER_SIMPLE,e as PREFLIGHT_CALIBRATION_ACCELEROMETER_TEMPERATURE,c as PREFLIGHT_CALIBRATION_ACCELEROMETER_TRIM};

package/dist/dialects/ardupilotmega/constants/preflight-calibration-magnetometer.d.ts

@@ -0,0 +1,7 @@
+type PREFLIGHT_CALIBRATION_MAGNETOMETER = 0 | 1 | 76;
+declare const PREFLIGHT_CALIBRATION_MAGNETOMETER_NONE: 0;
+declare const PREFLIGHT_CALIBRATION_MAGNETOMETER_START: 1;
+declare const PREFLIGHT_CALIBRATION_MAGNETOMETER_FORCE_SAVE: 76;
+
+export { PREFLIGHT_CALIBRATION_MAGNETOMETER_FORCE_SAVE, PREFLIGHT_CALIBRATION_MAGNETOMETER_NONE, PREFLIGHT_CALIBRATION_MAGNETOMETER_START };
+export type { PREFLIGHT_CALIBRATION_MAGNETOMETER };

package/dist/dialects/ardupilotmega/constants/preflight-calibration-magnetometer.js

@@ -0,0 +1 @@
+const o=0,t=1,c=76;export{c as PREFLIGHT_CALIBRATION_MAGNETOMETER_FORCE_SAVE,o as PREFLIGHT_CALIBRATION_MAGNETOMETER_NONE,t as PREFLIGHT_CALIBRATION_MAGNETOMETER_START};

package/dist/dialects/ardupilotmega/constants/preflight-storage-mission-action.d.ts

@@ -0,0 +1,7 @@
+type PREFLIGHT_STORAGE_MISSION_ACTION = 0 | 1 | 2;
+declare const MISSION_READ_PERSISTENT: 0;
+declare const MISSION_WRITE_PERSISTENT: 1;
+declare const MISSION_RESET_DEFAULT: 2;
+
+export { MISSION_READ_PERSISTENT, MISSION_RESET_DEFAULT, MISSION_WRITE_PERSISTENT };
+export type { PREFLIGHT_STORAGE_MISSION_ACTION };

package/dist/dialects/ardupilotmega/constants/preflight-storage-mission-action.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2;export{o as MISSION_READ_PERSISTENT,c as MISSION_RESET_DEFAULT,t as MISSION_WRITE_PERSISTENT};

package/dist/dialects/ardupilotmega/constants/preflight-storage-parameter-action.d.ts

@@ -0,0 +1,9 @@
+type PREFLIGHT_STORAGE_PARAMETER_ACTION = 0 | 1 | 2 | 3 | 4;
+declare const PARAM_READ_PERSISTENT: 0;
+declare const PARAM_WRITE_PERSISTENT: 1;
+declare const PARAM_RESET_FACTORY_DEFAULT: 2;
+declare const PARAM_RESET_SENSOR_DEFAULT: 3;
+declare const PARAM_RESET_ALL_DEFAULT: 4;
+
+export { PARAM_READ_PERSISTENT, PARAM_RESET_ALL_DEFAULT, PARAM_RESET_FACTORY_DEFAULT, PARAM_RESET_SENSOR_DEFAULT, PARAM_WRITE_PERSISTENT };
+export type { PREFLIGHT_STORAGE_PARAMETER_ACTION };

package/dist/dialects/ardupilotmega/constants/preflight-storage-parameter-action.js

@@ -0,0 +1 @@
+const o=0,t=1,c=2,e=3,n=4;export{o as PARAM_READ_PERSISTENT,n as PARAM_RESET_ALL_DEFAULT,c as PARAM_RESET_FACTORY_DEFAULT,e as PARAM_RESET_SENSOR_DEFAULT,t as PARAM_WRITE_PERSISTENT};