wasmtime 10.0.1 → 11.0.0

data/ext/cargo-vendor/cranelift-codegen-meta-0.98.1/src/shared/instructions.rs

@@ -0,0 +1,3847 @@
+#![allow(non_snake_case)]
+
+use crate::cdsl::instructions::{
+    AllInstructions, InstructionBuilder as Inst, InstructionGroupBuilder,
+};
+use crate::cdsl::operands::Operand;
+use crate::cdsl::types::{LaneType, ValueType};
+use crate::cdsl::typevar::{Interval, TypeSetBuilder, TypeVar};
+use crate::shared::formats::Formats;
+use crate::shared::types;
+use crate::shared::{entities::EntityRefs, immediates::Immediates};
+
+#[inline(never)]
+fn define_control_flow(
+    ig: &mut InstructionGroupBuilder,
+    formats: &Formats,
+    imm: &Immediates,
+    entities: &EntityRefs,
+) {
+    ig.push(
+        Inst::new(
+            "jump",
+            r#"
+        Jump.
+
+        Unconditionally jump to a basic block, passing the specified
+        block arguments. The number and types of arguments must match the
+        destination block.
+        "#,
+            &formats.jump,
+        )
+        .operands_in(vec![Operand::new("block_call", &entities.block_call)
+            .with_doc("Destination basic block, with its arguments provided")])
+        .branches(),
+    );
+
+    let ScalarTruthy = &TypeVar::new(
+        "ScalarTruthy",
+        "A scalar truthy type",
+        TypeSetBuilder::new().ints(Interval::All).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "brif",
+            r#"
+        Conditional branch when cond is non-zero.
+
+        Take the ``then`` branch when ``c != 0``, and the ``else`` branch otherwise.
+        "#,
+            &formats.brif,
+        )
+        .operands_in(vec![
+            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
+            Operand::new("block_then", &entities.block_then).with_doc("Then block"),
+            Operand::new("block_else", &entities.block_else).with_doc("Else block"),
+        ])
+        .branches(),
+    );
+
+    {
+        let _i32 = &TypeVar::new(
+            "i32",
+            "A 32 bit scalar integer type",
+            TypeSetBuilder::new().ints(32..32).build(),
+        );
+
+        ig.push(
+            Inst::new(
+                "br_table",
+                r#"
+        Indirect branch via jump table.
+
+        Use ``x`` as an unsigned index into the jump table ``JT``. If a jump
+        table entry is found, branch to the corresponding block. If no entry was
+        found or the index is out-of-bounds, branch to the default block of the
+        table.
+
+        Note that this branch instruction can't pass arguments to the targeted
+        blocks. Split critical edges as needed to work around this.
+
+        Do not confuse this with "tables" in WebAssembly. ``br_table`` is for
+        jump tables with destinations within the current function only -- think
+        of a ``match`` in Rust or a ``switch`` in C.  If you want to call a
+        function in a dynamic library, that will typically use
+        ``call_indirect``.
+        "#,
+                &formats.branch_table,
+            )
+            .operands_in(vec![
+                Operand::new("x", _i32).with_doc("i32 index into jump table"),
+                Operand::new("JT", &entities.jump_table),
+            ])
+            .branches(),
+        );
+    }
+
+    let iAddr = &TypeVar::new(
+        "iAddr",
+        "An integer address type",
+        TypeSetBuilder::new().ints(32..64).refs(32..64).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "debugtrap",
+            r#"
+        Encodes an assembly debug trap.
+        "#,
+            &formats.nullary,
+        )
+        .other_side_effects()
+        .can_load()
+        .can_store(),
+    );
+
+    ig.push(
+        Inst::new(
+            "trap",
+            r#"
+        Terminate execution unconditionally.
+        "#,
+            &formats.trap,
+        )
+        .operands_in(vec![Operand::new("code", &imm.trapcode)])
+        .can_trap()
+        .terminates_block(),
+    );
+
+    ig.push(
+        Inst::new(
+            "trapz",
+            r#"
+        Trap when zero.
+
+        if ``c`` is non-zero, execution continues at the following instruction.
+        "#,
+            &formats.cond_trap,
+        )
+        .operands_in(vec![
+            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
+            Operand::new("code", &imm.trapcode),
+        ])
+        .can_trap(),
+    );
+
+    ig.push(
+        Inst::new(
+            "resumable_trap",
+            r#"
+        A resumable trap.
+
+        This instruction allows non-conditional traps to be used as non-terminal instructions.
+        "#,
+            &formats.trap,
+        )
+        .operands_in(vec![Operand::new("code", &imm.trapcode)])
+        .can_trap(),
+    );
+
+    ig.push(
+        Inst::new(
+            "trapnz",
+            r#"
+        Trap when non-zero.
+
+        If ``c`` is zero, execution continues at the following instruction.
+        "#,
+            &formats.cond_trap,
+        )
+        .operands_in(vec![
+            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
+            Operand::new("code", &imm.trapcode),
+        ])
+        .can_trap(),
+    );
+
+    ig.push(
+        Inst::new(
+            "resumable_trapnz",
+            r#"
+        A resumable trap to be called when the passed condition is non-zero.
+
+        If ``c`` is zero, execution continues at the following instruction.
+        "#,
+            &formats.cond_trap,
+        )
+        .operands_in(vec![
+            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
+            Operand::new("code", &imm.trapcode),
+        ])
+        .can_trap(),
+    );
+
+    ig.push(
+        Inst::new(
+            "return",
+            r#"
+        Return from the function.
+
+        Unconditionally transfer control to the calling function, passing the
+        provided return values. The list of return values must match the
+        function signature's return types.
+        "#,
+            &formats.multiary,
+        )
+        .operands_in(vec![
+            Operand::new("rvals", &entities.varargs).with_doc("return values")
+        ])
+        .returns(),
+    );
+
+    ig.push(
+        Inst::new(
+            "call",
+            r#"
+        Direct function call.
+
+        Call a function which has been declared in the preamble. The argument
+        types must match the function's signature.
+        "#,
+            &formats.call,
+        )
+        .operands_in(vec![
+            Operand::new("FN", &entities.func_ref)
+                .with_doc("function to call, declared by `function`"),
+            Operand::new("args", &entities.varargs).with_doc("call arguments"),
+        ])
+        .operands_out(vec![
+            Operand::new("rvals", &entities.varargs).with_doc("return values")
+        ])
+        .call(),
+    );
+
+    ig.push(
+        Inst::new(
+            "call_indirect",
+            r#"
+        Indirect function call.
+
+        Call the function pointed to by `callee` with the given arguments. The
+        called function must match the specified signature.
+
+        Note that this is different from WebAssembly's ``call_indirect``; the
+        callee is a native address, rather than a table index. For WebAssembly,
+        `table_addr` and `load` are used to obtain a native address
+        from a table.
+        "#,
+            &formats.call_indirect,
+        )
+        .operands_in(vec![
+            Operand::new("SIG", &entities.sig_ref).with_doc("function signature"),
+            Operand::new("callee", iAddr).with_doc("address of function to call"),
+            Operand::new("args", &entities.varargs).with_doc("call arguments"),
+        ])
+        .operands_out(vec![
+            Operand::new("rvals", &entities.varargs).with_doc("return values")
+        ])
+        .call(),
+    );
+
+    ig.push(
+        Inst::new(
+            "return_call",
+            r#"
+        Direct tail call.
+
+        Tail call a function which has been declared in the preamble. The
+        argument types must match the function's signature, the caller and
+        callee calling conventions must be the same, and must be a calling
+        convention that supports tail calls.
+
+        This instruction is a block terminator.
+        "#,
+            &formats.call,
+        )
+        .operands_in(vec![
+            Operand::new("FN", &entities.func_ref)
+                .with_doc("function to call, declared by `function`"),
+            Operand::new("args", &entities.varargs).with_doc("call arguments"),
+        ])
+        .returns()
+        .call(),
+    );
+
+    ig.push(
+        Inst::new(
+            "return_call_indirect",
+            r#"
+        Indirect tail call.
+
+        Call the function pointed to by `callee` with the given arguments. The
+        argument types must match the function's signature, the caller and
+        callee calling conventions must be the same, and must be a calling
+        convention that supports tail calls.
+
+        This instruction is a block terminator.
+
+        Note that this is different from WebAssembly's ``tail_call_indirect``;
+        the callee is a native address, rather than a table index. For
+        WebAssembly, `table_addr` and `load` are used to obtain a native address
+        from a table.
+        "#,
+            &formats.call_indirect,
+        )
+        .operands_in(vec![
+            Operand::new("SIG", &entities.sig_ref).with_doc("function signature"),
+            Operand::new("callee", iAddr).with_doc("address of function to call"),
+            Operand::new("args", &entities.varargs).with_doc("call arguments"),
+        ])
+        .returns()
+        .call(),
+    );
+
+    ig.push(
+        Inst::new(
+            "func_addr",
+            r#"
+        Get the address of a function.
+
+        Compute the absolute address of a function declared in the preamble.
+        The returned address can be used as a ``callee`` argument to
+        `call_indirect`. This is also a method for calling functions that
+        are too far away to be addressable by a direct `call`
+        instruction.
+        "#,
+            &formats.func_addr,
+        )
+        .operands_in(vec![Operand::new("FN", &entities.func_ref)
+            .with_doc("function to call, declared by `function`")])
+        .operands_out(vec![Operand::new("addr", iAddr)]),
+    );
+}
+
+#[inline(never)]
+fn define_simd_lane_access(
+    ig: &mut InstructionGroupBuilder,
+    formats: &Formats,
+    imm: &Immediates,
+    _: &EntityRefs,
+) {
+    let TxN = &TypeVar::new(
+        "TxN",
+        "A SIMD vector type",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .floats(Interval::All)
+            .simd_lanes(Interval::All)
+            .dynamic_simd_lanes(Interval::All)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "splat",
+            r#"
+        Vector splat.
+
+        Return a vector whose lanes are all ``x``.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![
+            Operand::new("x", &TxN.lane_of()).with_doc("Value to splat to all lanes")
+        ])
+        .operands_out(vec![Operand::new("a", TxN)]),
+    );
+
+    let I8x16 = &TypeVar::new(
+        "I8x16",
+        "A SIMD vector type consisting of 16 lanes of 8-bit integers",
+        TypeSetBuilder::new()
+            .ints(8..8)
+            .simd_lanes(16..16)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "swizzle",
+            r#"
+        Vector swizzle.
+
+        Returns a new vector with byte-width lanes selected from the lanes of the first input
+        vector ``x`` specified in the second input vector ``s``. The indices ``i`` in range
+        ``[0, 15]`` select the ``i``-th element of ``x``. For indices outside of the range the
+        resulting lane is 0. Note that this operates on byte-width lanes.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", I8x16).with_doc("Vector to modify by re-arranging lanes"),
+            Operand::new("y", I8x16).with_doc("Mask for re-arranging lanes"),
+        ])
+        .operands_out(vec![Operand::new("a", I8x16)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "x86_pshufb",
+            r#"
+        A vector swizzle lookalike which has the semantics of `pshufb` on x64.
+
+        This instruction will permute the 8-bit lanes of `x` with the indices
+        specified in `y`. Each lane in the mask, `y`, uses the bottom four
+        bits for selecting the lane from `x` unless the most significant bit
+        is set, in which case the lane is zeroed. The output vector will have
+        the following contents when the element of `y` is in these ranges:
+
+        * `[0, 127]` -> `x[y[i] % 16]`
+        * `[128, 255]` -> 0
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", I8x16).with_doc("Vector to modify by re-arranging lanes"),
+            Operand::new("y", I8x16).with_doc("Mask for re-arranging lanes"),
+        ])
+        .operands_out(vec![Operand::new("a", I8x16)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "insertlane",
+            r#"
+        Insert ``y`` as lane ``Idx`` in x.
+
+        The lane index, ``Idx``, is an immediate value, not an SSA value. It
+        must indicate a valid lane index for the type of ``x``.
+        "#,
+            &formats.ternary_imm8,
+        )
+        .operands_in(vec![
+            Operand::new("x", TxN).with_doc("The vector to modify"),
+            Operand::new("y", &TxN.lane_of()).with_doc("New lane value"),
+            Operand::new("Idx", &imm.uimm8).with_doc("Lane index"),
+        ])
+        .operands_out(vec![Operand::new("a", TxN)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "extractlane",
+            r#"
+        Extract lane ``Idx`` from ``x``.
+
+        The lane index, ``Idx``, is an immediate value, not an SSA value. It
+        must indicate a valid lane index for the type of ``x``. Note that the upper bits of ``a``
+        may or may not be zeroed depending on the ISA but the type system should prevent using
+        ``a`` as anything other than the extracted value.
+        "#,
+            &formats.binary_imm8,
+        )
+        .operands_in(vec![
+            Operand::new("x", TxN),
+            Operand::new("Idx", &imm.uimm8).with_doc("Lane index"),
+        ])
+        .operands_out(vec![Operand::new("a", &TxN.lane_of())]),
+    );
+}
+
+#[inline(never)]
+fn define_simd_arithmetic(
+    ig: &mut InstructionGroupBuilder,
+    formats: &Formats,
+    _: &Immediates,
+    _: &EntityRefs,
+) {
+    let Int = &TypeVar::new(
+        "Int",
+        "A scalar or vector integer type",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .simd_lanes(Interval::All)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "smin",
+            r#"
+        Signed integer minimum.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "umin",
+            r#"
+        Unsigned integer minimum.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "smax",
+            r#"
+        Signed integer maximum.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "umax",
+            r#"
+        Unsigned integer maximum.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    let IxN = &TypeVar::new(
+        "IxN",
+        "A SIMD vector type containing integers",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .simd_lanes(Interval::All)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "avg_round",
+            r#"
+        Unsigned average with rounding: `a := (x + y + 1) // 2`
+
+        The addition does not lose any information (such as from overflow).
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
+        .operands_out(vec![Operand::new("a", IxN)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "uadd_sat",
+            r#"
+        Add with unsigned saturation.
+
+        This is similar to `iadd` but the operands are interpreted as unsigned integers and their
+        summed result, instead of wrapping, will be saturated to the highest unsigned integer for
+        the controlling type (e.g. `0xFF` for i8).
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
+        .operands_out(vec![Operand::new("a", IxN)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "sadd_sat",
+            r#"
+        Add with signed saturation.
+
+        This is similar to `iadd` but the operands are interpreted as signed integers and their
+        summed result, instead of wrapping, will be saturated to the lowest or highest
+        signed integer for the controlling type (e.g. `0x80` or `0x7F` for i8). For example,
+        since an `sadd_sat.i8` of `0x70` and `0x70` is greater than `0x7F`, the result will be
+        clamped to `0x7F`.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
+        .operands_out(vec![Operand::new("a", IxN)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "usub_sat",
+            r#"
+        Subtract with unsigned saturation.
+
+        This is similar to `isub` but the operands are interpreted as unsigned integers and their
+        difference, instead of wrapping, will be saturated to the lowest unsigned integer for
+        the controlling type (e.g. `0x00` for i8).
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
+        .operands_out(vec![Operand::new("a", IxN)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "ssub_sat",
+            r#"
+        Subtract with signed saturation.
+
+        This is similar to `isub` but the operands are interpreted as signed integers and their
+        difference, instead of wrapping, will be saturated to the lowest or highest
+        signed integer for the controlling type (e.g. `0x80` or `0x7F` for i8).
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
+        .operands_out(vec![Operand::new("a", IxN)]),
+    );
+}
+
+#[allow(clippy::many_single_char_names)]
+pub(crate) fn define(
+    all_instructions: &mut AllInstructions,
+    formats: &Formats,
+    imm: &Immediates,
+    entities: &EntityRefs,
+) {
+    let mut ig = InstructionGroupBuilder::new(all_instructions);
+
+    define_control_flow(&mut ig, formats, imm, entities);
+    define_simd_lane_access(&mut ig, formats, imm, entities);
+    define_simd_arithmetic(&mut ig, formats, imm, entities);
+
+    // Operand kind shorthands.
+    let i8: &TypeVar = &ValueType::from(LaneType::from(types::Int::I8)).into();
+    let f32_: &TypeVar = &ValueType::from(LaneType::from(types::Float::F32)).into();
+    let f64_: &TypeVar = &ValueType::from(LaneType::from(types::Float::F64)).into();
+
+    // Starting definitions.
+    let Int = &TypeVar::new(
+        "Int",
+        "A scalar or vector integer type",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .simd_lanes(Interval::All)
+            .dynamic_simd_lanes(Interval::All)
+            .build(),
+    );
+
+    let NarrowInt = &TypeVar::new(
+        "NarrowInt",
+        "An integer type of width up to `i64`",
+        TypeSetBuilder::new().ints(8..64).build(),
+    );
+
+    let ScalarTruthy = &TypeVar::new(
+        "ScalarTruthy",
+        "A scalar truthy type",
+        TypeSetBuilder::new().ints(Interval::All).build(),
+    );
+
+    let iB = &TypeVar::new(
+        "iB",
+        "A scalar integer type",
+        TypeSetBuilder::new().ints(Interval::All).build(),
+    );
+
+    let iSwappable = &TypeVar::new(
+        "iSwappable",
+        "A multi byte scalar integer type",
+        TypeSetBuilder::new().ints(16..128).build(),
+    );
+
+    let iAddr = &TypeVar::new(
+        "iAddr",
+        "An integer address type",
+        TypeSetBuilder::new().ints(32..64).refs(32..64).build(),
+    );
+
+    let Ref = &TypeVar::new(
+        "Ref",
+        "A scalar reference type",
+        TypeSetBuilder::new().refs(Interval::All).build(),
+    );
+
+    let TxN = &TypeVar::new(
+        "TxN",
+        "A SIMD vector type",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .floats(Interval::All)
+            .simd_lanes(Interval::All)
+            .includes_scalars(false)
+            .build(),
+    );
+    let Any = &TypeVar::new(
+        "Any",
+        "Any integer, float, or reference scalar or vector type",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .floats(Interval::All)
+            .refs(Interval::All)
+            .simd_lanes(Interval::All)
+            .includes_scalars(true)
+            .build(),
+    );
+
+    let Mem = &TypeVar::new(
+        "Mem",
+        "Any type that can be stored in memory",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .floats(Interval::All)
+            .simd_lanes(Interval::All)
+            .refs(Interval::All)
+            .dynamic_simd_lanes(Interval::All)
+            .build(),
+    );
+
+    let MemTo = &TypeVar::copy_from(Mem, "MemTo".to_string());
+
+    ig.push(
+        Inst::new(
+            "load",
+            r#"
+        Load from memory at ``p + Offset``.
+
+        This is a polymorphic instruction that can load any value type which
+        has a memory representation.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "store",
+            r#"
+        Store ``x`` to memory at ``p + Offset``.
+
+        This is a polymorphic instruction that can store any value type with a
+        memory representation.
+        "#,
+            &formats.store,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("x", Mem).with_doc("Value to be stored"),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .can_store(),
+    );
+
+    let iExt8 = &TypeVar::new(
+        "iExt8",
+        "An integer type with more than 8 bits",
+        TypeSetBuilder::new().ints(16..64).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "uload8",
+            r#"
+        Load 8 bits from memory at ``p + Offset`` and zero-extend.
+
+        This is equivalent to ``load.i8`` followed by ``uextend``.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", iExt8)])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "sload8",
+            r#"
+        Load 8 bits from memory at ``p + Offset`` and sign-extend.
+
+        This is equivalent to ``load.i8`` followed by ``sextend``.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", iExt8)])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "istore8",
+            r#"
+        Store the low 8 bits of ``x`` to memory at ``p + Offset``.
+
+        This is equivalent to ``ireduce.i8`` followed by ``store.i8``.
+        "#,
+            &formats.store,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("x", iExt8),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .can_store(),
+    );
+
+    let iExt16 = &TypeVar::new(
+        "iExt16",
+        "An integer type with more than 16 bits",
+        TypeSetBuilder::new().ints(32..64).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "uload16",
+            r#"
+        Load 16 bits from memory at ``p + Offset`` and zero-extend.
+
+        This is equivalent to ``load.i16`` followed by ``uextend``.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", iExt16)])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "sload16",
+            r#"
+        Load 16 bits from memory at ``p + Offset`` and sign-extend.
+
+        This is equivalent to ``load.i16`` followed by ``sextend``.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", iExt16)])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "istore16",
+            r#"
+        Store the low 16 bits of ``x`` to memory at ``p + Offset``.
+
+        This is equivalent to ``ireduce.i16`` followed by ``store.i16``.
+        "#,
+            &formats.store,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("x", iExt16),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .can_store(),
+    );
+
+    let iExt32 = &TypeVar::new(
+        "iExt32",
+        "An integer type with more than 32 bits",
+        TypeSetBuilder::new().ints(64..64).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "uload32",
+            r#"
+        Load 32 bits from memory at ``p + Offset`` and zero-extend.
+
+        This is equivalent to ``load.i32`` followed by ``uextend``.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", iExt32)])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "sload32",
+            r#"
+        Load 32 bits from memory at ``p + Offset`` and sign-extend.
+
+        This is equivalent to ``load.i32`` followed by ``sextend``.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", iExt32)])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "istore32",
+            r#"
+        Store the low 32 bits of ``x`` to memory at ``p + Offset``.
+
+        This is equivalent to ``ireduce.i32`` followed by ``store.i32``.
+        "#,
+            &formats.store,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("x", iExt32),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .can_store(),
+    );
+
+    let I16x8 = &TypeVar::new(
+        "I16x8",
+        "A SIMD vector with exactly 8 lanes of 16-bit values",
+        TypeSetBuilder::new()
+            .ints(16..16)
+            .simd_lanes(8..8)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "uload8x8",
+            r#"
+        Load an 8x8 vector (64 bits) from memory at ``p + Offset`` and zero-extend into an i16x8
+        vector.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", I16x8).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "sload8x8",
+            r#"
+        Load an 8x8 vector (64 bits) from memory at ``p + Offset`` and sign-extend into an i16x8
+        vector.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", I16x8).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    let I32x4 = &TypeVar::new(
+        "I32x4",
+        "A SIMD vector with exactly 4 lanes of 32-bit values",
+        TypeSetBuilder::new()
+            .ints(32..32)
+            .simd_lanes(4..4)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "uload16x4",
+            r#"
+        Load a 16x4 vector (64 bits) from memory at ``p + Offset`` and zero-extend into an i32x4
+        vector.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", I32x4).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "sload16x4",
+            r#"
+        Load a 16x4 vector (64 bits) from memory at ``p + Offset`` and sign-extend into an i32x4
+        vector.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", I32x4).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    let I64x2 = &TypeVar::new(
+        "I64x2",
+        "A SIMD vector with exactly 2 lanes of 64-bit values",
+        TypeSetBuilder::new()
+            .ints(64..64)
+            .simd_lanes(2..2)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "uload32x2",
+            r#"
+        Load an 32x2 vector (64 bits) from memory at ``p + Offset`` and zero-extend into an i64x2
+        vector.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", I64x2).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "sload32x2",
+            r#"
+        Load a 32x2 vector (64 bits) from memory at ``p + Offset`` and sign-extend into an i64x2
+        vector.
+        "#,
+            &formats.load,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
+        ])
+        .operands_out(vec![Operand::new("a", I64x2).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "stack_load",
+            r#"
+        Load a value from a stack slot at the constant offset.
+
+        This is a polymorphic instruction that can load any value type which
+        has a memory representation.
+
+        The offset is an immediate constant, not an SSA value. The memory
+        access cannot go out of bounds, i.e.
+        `sizeof(a) + Offset <= sizeof(SS)`.
+        "#,
+            &formats.stack_load,
+        )
+        .operands_in(vec![
+            Operand::new("SS", &entities.stack_slot),
+            Operand::new("Offset", &imm.offset32).with_doc("In-bounds offset into stack slot"),
+        ])
+        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "stack_store",
+            r#"
+        Store a value to a stack slot at a constant offset.
+
+        This is a polymorphic instruction that can store any value type with a
+        memory representation.
+
+        The offset is an immediate constant, not an SSA value. The memory
+        access cannot go out of bounds, i.e.
+        `sizeof(a) + Offset <= sizeof(SS)`.
+        "#,
+            &formats.stack_store,
+        )
+        .operands_in(vec![
+            Operand::new("x", Mem).with_doc("Value to be stored"),
+            Operand::new("SS", &entities.stack_slot),
+            Operand::new("Offset", &imm.offset32).with_doc("In-bounds offset into stack slot"),
+        ])
+        .can_store(),
+    );
+
+    ig.push(
+        Inst::new(
+            "stack_addr",
+            r#"
+        Get the address of a stack slot.
+
+        Compute the absolute address of a byte in a stack slot. The offset must
+        refer to a byte inside the stack slot:
+        `0 <= Offset < sizeof(SS)`.
+        "#,
+            &formats.stack_load,
+        )
+        .operands_in(vec![
+            Operand::new("SS", &entities.stack_slot),
+            Operand::new("Offset", &imm.offset32).with_doc("In-bounds offset into stack slot"),
+        ])
+        .operands_out(vec![Operand::new("addr", iAddr)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "dynamic_stack_load",
+            r#"
+        Load a value from a dynamic stack slot.
+
+        This is a polymorphic instruction that can load any value type which
+        has a memory representation.
+        "#,
+            &formats.dynamic_stack_load,
+        )
+        .operands_in(vec![Operand::new("DSS", &entities.dynamic_stack_slot)])
+        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")])
+        .can_load(),
+    );
+
+    ig.push(
+        Inst::new(
+            "dynamic_stack_store",
+            r#"
+        Store a value to a dynamic stack slot.
+
+        This is a polymorphic instruction that can store any dynamic value type with a
+        memory representation.
+        "#,
+            &formats.dynamic_stack_store,
+        )
+        .operands_in(vec![
+            Operand::new("x", Mem).with_doc("Value to be stored"),
+            Operand::new("DSS", &entities.dynamic_stack_slot),
+        ])
+        .can_store(),
+    );
+
+    ig.push(
+        Inst::new(
+            "dynamic_stack_addr",
+            r#"
+        Get the address of a dynamic stack slot.
+
+        Compute the absolute address of the first byte of a dynamic stack slot.
+        "#,
+            &formats.dynamic_stack_load,
+        )
+        .operands_in(vec![Operand::new("DSS", &entities.dynamic_stack_slot)])
+        .operands_out(vec![Operand::new("addr", iAddr)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "global_value",
+            r#"
+        Compute the value of global GV.
+        "#,
+            &formats.unary_global_value,
+        )
+        .operands_in(vec![Operand::new("GV", &entities.global_value)])
+        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")]),
+    );
+
+    ig.push(
+        Inst::new(
+            "symbol_value",
+            r#"
+        Compute the value of global GV, which is a symbolic value.
+        "#,
+            &formats.unary_global_value,
+        )
+        .operands_in(vec![Operand::new("GV", &entities.global_value)])
+        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")]),
+    );
+
+    ig.push(
+        Inst::new(
+            "tls_value",
+            r#"
+        Compute the value of global GV, which is a TLS (thread local storage) value.
+        "#,
+            &formats.unary_global_value,
+        )
+        .operands_in(vec![Operand::new("GV", &entities.global_value)])
+        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")]),
+    );
+
+    // Note this instruction is marked as having other side-effects, so GVN won't try to hoist it,
+    // which would result in it being subject to spilling. While not hoisting would generally hurt
+    // performance, since a computed value used many times may need to be regenerated before each
+    // use, it is not the case here: this instruction doesn't generate any code.  That's because,
+    // by definition the pinned register is never used by the register allocator, but is written to
+    // and read explicitly and exclusively by set_pinned_reg and get_pinned_reg.
+    ig.push(
+        Inst::new(
+            "get_pinned_reg",
+            r#"
+            Gets the content of the pinned register, when it's enabled.
+        "#,
+            &formats.nullary,
+        )
+        .operands_out(vec![Operand::new("addr", iAddr)])
+        .other_side_effects(),
+    );
+
+    ig.push(
+        Inst::new(
+            "set_pinned_reg",
+            r#"
+        Sets the content of the pinned register, when it's enabled.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("addr", iAddr)])
+        .other_side_effects(),
+    );
+
+    ig.push(
+        Inst::new(
+            "get_frame_pointer",
+            r#"
+        Get the address in the frame pointer register.
+
+        Usage of this instruction requires setting `preserve_frame_pointers` to `true`.
+        "#,
+            &formats.nullary,
+        )
+        .operands_out(vec![Operand::new("addr", iAddr)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "get_stack_pointer",
+            r#"
+        Get the address in the stack pointer register.
+        "#,
+            &formats.nullary,
+        )
+        .operands_out(vec![Operand::new("addr", iAddr)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "get_return_address",
+            r#"
+        Get the PC where this function will transfer control to when it returns.
+
+        Usage of this instruction requires setting `preserve_frame_pointers` to `true`.
+        "#,
+            &formats.nullary,
+        )
+        .operands_out(vec![Operand::new("addr", iAddr)]),
+    );
+
+    let TableOffset = &TypeVar::new(
+        "TableOffset",
+        "An unsigned table offset",
+        TypeSetBuilder::new().ints(32..64).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "table_addr",
+            r#"
+        Bounds check and compute absolute address of a table entry.
+
+        Verify that the offset ``p`` is in bounds for the table T, and generate
+        an absolute address that is safe to dereference.
+
+        ``Offset`` must be less than the size of a table element.
+
+        1. If ``p`` is not greater than the table bound, return an absolute
+           address corresponding to a byte offset of ``p`` from the table's
+           base address.
+        2. If ``p`` is greater than the table bound, generate a trap.
+        "#,
+            &formats.table_addr,
+        )
+        .operands_in(vec![
+            Operand::new("T", &entities.table),
+            Operand::new("p", TableOffset),
+            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from element address"),
+        ])
+        .operands_out(vec![Operand::new("addr", iAddr)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "iconst",
+            r#"
+        Integer constant.
+
+        Create a scalar integer SSA value with an immediate constant value, or
+        an integer vector where all the lanes have the same value.
+        "#,
+            &formats.unary_imm,
+        )
+        .operands_in(vec![Operand::new("N", &imm.imm64)])
+        .operands_out(vec![
+            Operand::new("a", NarrowInt).with_doc("A constant integer scalar or vector value")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "f32const",
+            r#"
+        Floating point constant.
+
+        Create a `f32` SSA value with an immediate constant value.
+        "#,
+            &formats.unary_ieee32,
+        )
+        .operands_in(vec![Operand::new("N", &imm.ieee32)])
+        .operands_out(vec![
+            Operand::new("a", f32_).with_doc("A constant f32 scalar value")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "f64const",
+            r#"
+        Floating point constant.
+
+        Create a `f64` SSA value with an immediate constant value.
+        "#,
+            &formats.unary_ieee64,
+        )
+        .operands_in(vec![Operand::new("N", &imm.ieee64)])
+        .operands_out(vec![
+            Operand::new("a", f64_).with_doc("A constant f64 scalar value")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "vconst",
+            r#"
+        SIMD vector constant.
+
+        Construct a vector with the given immediate bytes.
+        "#,
+            &formats.unary_const,
+        )
+        .operands_in(vec![Operand::new("N", &imm.pool_constant)
+            .with_doc("The 16 immediate bytes of a 128-bit vector")])
+        .operands_out(vec![
+            Operand::new("a", TxN).with_doc("A constant vector value")
+        ]),
+    );
+
+    let Tx16 = &TypeVar::new(
+        "Tx16",
+        "A SIMD vector with exactly 16 lanes of 8-bit values; eventually this may support other \
+         lane counts and widths",
+        TypeSetBuilder::new()
+            .ints(8..8)
+            .simd_lanes(16..16)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "shuffle",
+            r#"
+        SIMD vector shuffle.
+
+        Shuffle two vectors using the given immediate bytes. For each of the 16 bytes of the
+        immediate, a value i of 0-15 selects the i-th element of the first vector and a value i of
+        16-31 selects the (i-16)th element of the second vector. Immediate values outside of the
+        0-31 range are not valid.
+        "#,
+            &formats.shuffle,
+        )
+        .operands_in(vec![
+            Operand::new("a", Tx16).with_doc("A vector value"),
+            Operand::new("b", Tx16).with_doc("A vector value"),
+            Operand::new("mask", &imm.uimm128)
+                .with_doc("The 16 immediate bytes used for selecting the elements to shuffle"),
+        ])
+        .operands_out(vec![Operand::new("a", Tx16).with_doc("A vector value")]),
+    );
+
+    ig.push(
+        Inst::new(
+            "null",
+            r#"
+        Null constant value for reference types.
+
+        Create a scalar reference SSA value with a constant null value.
+        "#,
+            &formats.nullary,
+        )
+        .operands_out(vec![
+            Operand::new("a", Ref).with_doc("A constant reference null value")
+        ]),
+    );
+
+    ig.push(Inst::new(
+        "nop",
+        r#"
+        Just a dummy instruction.
+
+        Note: this doesn't compile to a machine code nop.
+        "#,
+        &formats.nullary,
+    ));
+
+    ig.push(
+        Inst::new(
+            "select",
+            r#"
+        Conditional select.
+
+        This instruction selects whole values. Use `bitselect` to choose each
+        bit according to a mask.
+        "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
+            Operand::new("x", Any).with_doc("Value to use when `c` is true"),
+            Operand::new("y", Any).with_doc("Value to use when `c` is false"),
+        ])
+        .operands_out(vec![Operand::new("a", Any)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "select_spectre_guard",
+            r#"
+            Conditional select intended for Spectre guards.
+
+            This operation is semantically equivalent to a select instruction.
+            However, it is guaranteed to not be removed or otherwise altered by any
+            optimization pass, and is guaranteed to result in a conditional-move
+            instruction, not a branch-based lowering.  As such, it is suitable
+            for use when producing Spectre guards. For example, a bounds-check
+            may guard against unsafe speculation past a bounds-check conditional
+            branch by passing the address or index to be accessed through a
+            conditional move, also gated on the same condition. Because no
+            Spectre-vulnerable processors are known to perform speculation on
+            conditional move instructions, this is guaranteed to pick the
+            correct input. If the selected input in case of overflow is a "safe"
+            value, for example a null pointer that causes an exception in the
+            speculative path, this ensures that no Spectre vulnerability will
+            exist.
+            "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
+            Operand::new("x", Any).with_doc("Value to use when `c` is true"),
+            Operand::new("y", Any).with_doc("Value to use when `c` is false"),
+        ])
+        .operands_out(vec![Operand::new("a", Any)])
+        .other_side_effects()
+        // We can de-duplicate spectre selects since the side effect is
+        // idempotent.
+        .side_effects_idempotent(),
+    );
+
+    ig.push(
+        Inst::new(
+            "bitselect",
+            r#"
+        Conditional select of bits.
+
+        For each bit in `c`, this instruction selects the corresponding bit from `x` if the bit
+        in `x` is 1 and the corresponding bit from `y` if the bit in `c` is 0. See also:
+        `select`.
+        "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("c", Any).with_doc("Controlling value to test"),
+            Operand::new("x", Any).with_doc("Value to use when `c` is true"),
+            Operand::new("y", Any).with_doc("Value to use when `c` is false"),
+        ])
+        .operands_out(vec![Operand::new("a", Any)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "x86_blendv",
+            r#"
+        A bitselect-lookalike instruction except with the semantics of
+        `blendv`-related instructions on x86.
+
+        This instruction will use the top bit of each lane in `c`, the condition
+        mask. If the bit is 1 then the corresponding lane from `x` is chosen.
+        Otherwise the corresponding lane from `y` is chosen.
+
+            "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("c", Any).with_doc("Controlling value to test"),
+            Operand::new("x", Any).with_doc("Value to use when `c` is true"),
+            Operand::new("y", Any).with_doc("Value to use when `c` is false"),
+        ])
+        .operands_out(vec![Operand::new("a", Any)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "vany_true",
+            r#"
+        Reduce a vector to a scalar boolean.
+
+        Return a scalar boolean true if any lane in ``a`` is non-zero, false otherwise.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("a", TxN)])
+        .operands_out(vec![Operand::new("s", i8)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "vall_true",
+            r#"
+        Reduce a vector to a scalar boolean.
+
+        Return a scalar boolean true if all lanes in ``i`` are non-zero, false otherwise.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("a", TxN)])
+        .operands_out(vec![Operand::new("s", i8)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "vhigh_bits",
+            r#"
+        Reduce a vector to a scalar integer.
+
+        Return a scalar integer, consisting of the concatenation of the most significant bit
+        of each lane of ``a``.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("a", TxN)])
+        .operands_out(vec![Operand::new("x", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "icmp",
+            r#"
+        Integer comparison.
+
+        The condition code determines if the operands are interpreted as signed
+        or unsigned integers.
+
+        | Signed | Unsigned | Condition             |
+        |--------|----------|-----------------------|
+        | eq     | eq       | Equal                 |
+        | ne     | ne       | Not equal             |
+        | slt    | ult      | Less than             |
+        | sge    | uge      | Greater than or equal |
+        | sgt    | ugt      | Greater than          |
+        | sle    | ule      | Less than or equal    |
+
+        When this instruction compares integer vectors, it returns a vector of
+        lane-wise comparisons.
+
+        When comparing scalars, the result is:
+            - `1` if the condition holds.
+            - `0` if the condition does not hold.
+
+        When comparing vectors, the result is:
+            - `-1` (i.e. all ones) in each lane where the condition holds.
+            - `0` in each lane where the condition does not hold.
+        "#,
+            &formats.int_compare,
+        )
+        .operands_in(vec![
+            Operand::new("Cond", &imm.intcc),
+            Operand::new("x", Int),
+            Operand::new("y", Int),
+        ])
+        .operands_out(vec![Operand::new("a", &Int.as_truthy())]),
+    );
+
+    ig.push(
+        Inst::new(
+            "icmp_imm",
+            r#"
+        Compare scalar integer to a constant.
+
+        This is the same as the `icmp` instruction, except one operand is
+        a sign extended 64 bit immediate constant.
+
+        This instruction can only compare scalars. Use `icmp` for
+        lane-wise vector comparisons.
+        "#,
+            &formats.int_compare_imm,
+        )
+        .operands_in(vec![
+            Operand::new("Cond", &imm.intcc),
+            Operand::new("x", iB),
+            Operand::new("Y", &imm.imm64),
+        ])
+        .operands_out(vec![Operand::new("a", i8)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "iadd",
+            r#"
+        Wrapping integer addition: `a := x + y \pmod{2^B}`.
+
+        This instruction does not depend on the signed/unsigned interpretation
+        of the operands.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "isub",
+            r#"
+        Wrapping integer subtraction: `a := x - y \pmod{2^B}`.
+
+        This instruction does not depend on the signed/unsigned interpretation
+        of the operands.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "ineg",
+            r#"
+        Integer negation: `a := -x \pmod{2^B}`.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "iabs",
+            r#"
+        Integer absolute value with wrapping: `a := |x|`.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "imul",
+            r#"
+        Wrapping integer multiplication: `a := x y \pmod{2^B}`.
+
+        This instruction does not depend on the signed/unsigned interpretation
+        of the operands.
+
+        Polymorphic over all integer types (vector and scalar).
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "umulhi",
+            r#"
+        Unsigned integer multiplication, producing the high half of a
+        double-length result.
+
+        Polymorphic over all integer types (vector and scalar).
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "smulhi",
+            r#"
+        Signed integer multiplication, producing the high half of a
+        double-length result.
+
+        Polymorphic over all integer types (vector and scalar).
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    let I16or32 = &TypeVar::new(
+        "I16or32",
+        "A vector integer type with 16- or 32-bit numbers",
+        TypeSetBuilder::new().ints(16..32).simd_lanes(4..8).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "sqmul_round_sat",
+            r#"
+        Fixed-point multiplication of numbers in the QN format, where N + 1
+        is the number bitwidth:
+        `a := signed_saturate((x * y + 1 << (Q - 1)) >> Q)`
+
+        Polymorphic over all integer vector types with 16- or 32-bit numbers.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", I16or32), Operand::new("y", I16or32)])
+        .operands_out(vec![Operand::new("a", I16or32)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "x86_pmulhrsw",
+            r#"
+        A similar instruction to `sqmul_round_sat` except with the semantics
+        of x86's `pmulhrsw` instruction.
+
+        This is the same as `sqmul_round_sat` except when both input lanes are
+        `i16::MIN`.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", I16or32), Operand::new("y", I16or32)])
+        .operands_out(vec![Operand::new("a", I16or32)]),
+    );
+
+    // Integer division and remainder are scalar-only; most
+    // hardware does not directly support vector integer division.
+
+    ig.push(
+        Inst::new(
+            "udiv",
+            r#"
+        Unsigned integer division: `a := \lfloor {x \over y} \rfloor`.
+
+        This operation traps if the divisor is zero.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
+        .operands_out(vec![Operand::new("a", iB)])
+        .can_trap()
+        .side_effects_idempotent(),
+    );
+
+    ig.push(
+        Inst::new(
+            "sdiv",
+            r#"
+        Signed integer division rounded toward zero: `a := sign(xy)
+        \lfloor {|x| \over |y|}\rfloor`.
+
+        This operation traps if the divisor is zero, or if the result is not
+        representable in `B` bits two's complement. This only happens
+        when `x = -2^{B-1}, y = -1`.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
+        .operands_out(vec![Operand::new("a", iB)])
+        .can_trap()
+        .side_effects_idempotent(),
+    );
+
+    ig.push(
+        Inst::new(
+            "urem",
+            r#"
+        Unsigned integer remainder.
+
+        This operation traps if the divisor is zero.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
+        .operands_out(vec![Operand::new("a", iB)])
+        .can_trap()
+        .side_effects_idempotent(),
+    );
+
+    ig.push(
+        Inst::new(
+            "srem",
+            r#"
+        Signed integer remainder. The result has the sign of the dividend.
+
+        This operation traps if the divisor is zero.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
+        .operands_out(vec![Operand::new("a", iB)])
+        .can_trap()
+        .side_effects_idempotent(),
+    );
+
+    ig.push(
+        Inst::new(
+            "iadd_imm",
+            r#"
+        Add immediate integer.
+
+        Same as `iadd`, but one operand is a sign extended 64 bit immediate constant.
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "imul_imm",
+            r#"
+        Integer multiplication by immediate constant.
+
+        Same as `imul`, but one operand is a sign extended 64 bit immediate constant.
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "udiv_imm",
+            r#"
+        Unsigned integer division by an immediate constant.
+
+        Same as `udiv`, but one operand is a zero extended 64 bit immediate constant.
+
+        This operation traps if the divisor is zero.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "sdiv_imm",
+            r#"
+        Signed integer division by an immediate constant.
+
+        Same as `sdiv`, but one operand is a sign extended 64 bit immediate constant.
+
+        This operation traps if the divisor is zero, or if the result is not
+        representable in `B` bits two's complement. This only happens
+        when `x = -2^{B-1}, Y = -1`.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "urem_imm",
+            r#"
+        Unsigned integer remainder with immediate divisor.
+
+        Same as `urem`, but one operand is a zero extended 64 bit immediate constant.
+
+        This operation traps if the divisor is zero.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "srem_imm",
+            r#"
+        Signed integer remainder with immediate divisor.
+
+        Same as `srem`, but one operand is a sign extended 64 bit immediate constant.
+
+        This operation traps if the divisor is zero.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "irsub_imm",
+            r#"
+        Immediate reverse wrapping subtraction: `a := Y - x \pmod{2^B}`.
+
+        The immediate operand is a sign extended 64 bit constant.
+
+        Also works as integer negation when `Y = 0`. Use `iadd_imm`
+        with a negative immediate operand for the reverse immediate
+        subtraction.
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "iadd_cin",
+            r#"
+        Add integers with carry in.
+
+        Same as `iadd` with an additional carry input. Computes:
+
+        ```text
+            a = x + y + c_{in} \pmod 2^B
+        ```
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("x", iB),
+            Operand::new("y", iB),
+            Operand::new("c_in", i8).with_doc("Input carry flag"),
+        ])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "iadd_carry",
+            r#"
+        Add integers with carry in and out.
+
+        Same as `iadd` with an additional carry input and output.
+
+        ```text
+            a &= x + y + c_{in} \pmod 2^B \\
+            c_{out} &= x + y + c_{in} >= 2^B
+        ```
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("x", iB),
+            Operand::new("y", iB),
+            Operand::new("c_in", i8).with_doc("Input carry flag"),
+        ])
+        .operands_out(vec![
+            Operand::new("a", iB),
+            Operand::new("c_out", i8).with_doc("Output carry flag"),
+        ]),
+    );
+
+    {
+        let of_out = Operand::new("of", i8).with_doc("Overflow flag");
+        ig.push(
+            Inst::new(
+                "uadd_overflow",
+                r#"
+            Add integers unsigned with overflow out.
+            ``of`` is set when the addition overflowed.
+            ```text
+                a &= x + y \pmod 2^B \\
+                of &= x+y >= 2^B
+            ```
+            Polymorphic over all scalar integer types, but does not support vector
+            types.
+            "#,
+                &formats.binary,
+            )
+            .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
+            .operands_out(vec![Operand::new("a", iB), of_out.clone()]),
+        );
+
+        ig.push(
+            Inst::new(
+                "sadd_overflow",
+                r#"
+            Add integers signed with overflow out.
+            ``of`` is set when the addition over- or underflowed.
+            Polymorphic over all scalar integer types, but does not support vector
+            types.
+            "#,
+                &formats.binary,
+            )
+            .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
+            .operands_out(vec![Operand::new("a", iB), of_out.clone()]),
+        );
+
+        ig.push(
+            Inst::new(
+                "usub_overflow",
+                r#"
+            Subtract integers unsigned with overflow out.
+            ``of`` is set when the subtraction underflowed.
+            ```text
+                a &= x - y \pmod 2^B \\
+                of &= x - y < 0
+            ```
+            Polymorphic over all scalar integer types, but does not support vector
+            types.
+            "#,
+                &formats.binary,
+            )
+            .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
+            .operands_out(vec![Operand::new("a", iB), of_out.clone()]),
+        );
+
+        ig.push(
+            Inst::new(
+                "ssub_overflow",
+                r#"
+            Subtract integers signed with overflow out.
+            ``of`` is set when the subtraction over- or underflowed.
+            Polymorphic over all scalar integer types, but does not support vector
+            types.
+            "#,
+                &formats.binary,
+            )
+            .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
+            .operands_out(vec![Operand::new("a", iB), of_out.clone()]),
+        );
+
+        {
+            let NarrowScalar = &TypeVar::new(
+                "NarrowScalar",
+                "A scalar integer type up to 64 bits",
+                TypeSetBuilder::new().ints(8..64).build(),
+            );
+
+            ig.push(
+                Inst::new(
+                    "umul_overflow",
+                    r#"
+                Multiply integers unsigned with overflow out.
+                ``of`` is set when the multiplication overflowed.
+                ```text
+                    a &= x * y \pmod 2^B \\
+                    of &= x * y > 2^B
+                ```
+                Polymorphic over all scalar integer types except i128, but does not support vector
+                types.
+                "#,
+                    &formats.binary,
+                )
+                .operands_in(vec![
+                    Operand::new("x", NarrowScalar),
+                    Operand::new("y", NarrowScalar),
+                ])
+                .operands_out(vec![Operand::new("a", NarrowScalar), of_out.clone()]),
+            );
+
+            ig.push(
+                Inst::new(
+                    "smul_overflow",
+                    r#"
+                Multiply integers signed with overflow out.
+                ``of`` is set when the multiplication over- or underflowed.
+                Polymorphic over all scalar integer types except i128, but does not support vector
+                types.
+                "#,
+                    &formats.binary,
+                )
+                .operands_in(vec![
+                    Operand::new("x", NarrowScalar),
+                    Operand::new("y", NarrowScalar),
+                ])
+                .operands_out(vec![Operand::new("a", NarrowScalar), of_out.clone()]),
+            );
+        }
+    }
+
+    let i32_64 = &TypeVar::new(
+        "i32_64",
+        "A 32 or 64-bit scalar integer type",
+        TypeSetBuilder::new().ints(32..64).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "uadd_overflow_trap",
+            r#"
+        Unsigned addition of x and y, trapping if the result overflows.
+
+        Accepts 32 or 64-bit integers, and does not support vector types.
+        "#,
+            &formats.int_add_trap,
+        )
+        .operands_in(vec![
+            Operand::new("x", i32_64),
+            Operand::new("y", i32_64),
+            Operand::new("code", &imm.trapcode),
+        ])
+        .operands_out(vec![Operand::new("a", i32_64)])
+        .can_trap()
+        .side_effects_idempotent(),
+    );
+
+    ig.push(
+        Inst::new(
+            "isub_bin",
+            r#"
+        Subtract integers with borrow in.
+
+        Same as `isub` with an additional borrow flag input. Computes:
+
+        ```text
+            a = x - (y + b_{in}) \pmod 2^B
+        ```
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("x", iB),
+            Operand::new("y", iB),
+            Operand::new("b_in", i8).with_doc("Input borrow flag"),
+        ])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "isub_borrow",
+            r#"
+        Subtract integers with borrow in and out.
+
+        Same as `isub` with an additional borrow flag input and output.
+
+        ```text
+            a &= x - (y + b_{in}) \pmod 2^B \\
+            b_{out} &= x < y + b_{in}
+        ```
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("x", iB),
+            Operand::new("y", iB),
+            Operand::new("b_in", i8).with_doc("Input borrow flag"),
+        ])
+        .operands_out(vec![
+            Operand::new("a", iB),
+            Operand::new("b_out", i8).with_doc("Output borrow flag"),
+        ]),
+    );
+
+    let bits = &TypeVar::new(
+        "bits",
+        "Any integer, float, or vector type",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .floats(Interval::All)
+            .simd_lanes(Interval::All)
+            .includes_scalars(true)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "band",
+            r#"
+        Bitwise and.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
+        .operands_out(vec![Operand::new("a", bits)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bor",
+            r#"
+        Bitwise or.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
+        .operands_out(vec![Operand::new("a", bits)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bxor",
+            r#"
+        Bitwise xor.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
+        .operands_out(vec![Operand::new("a", bits)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bnot",
+            r#"
+        Bitwise not.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", bits)])
+        .operands_out(vec![Operand::new("a", bits)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "band_not",
+            r#"
+        Bitwise and not.
+
+        Computes `x & ~y`.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
+        .operands_out(vec![Operand::new("a", bits)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bor_not",
+            r#"
+        Bitwise or not.
+
+        Computes `x | ~y`.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
+        .operands_out(vec![Operand::new("a", bits)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bxor_not",
+            r#"
+        Bitwise xor not.
+
+        Computes `x ^ ~y`.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
+        .operands_out(vec![Operand::new("a", bits)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "band_imm",
+            r#"
+        Bitwise and with immediate.
+
+        Same as `band`, but one operand is a zero extended 64 bit immediate constant.
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bor_imm",
+            r#"
+        Bitwise or with immediate.
+
+        Same as `bor`, but one operand is a zero extended 64 bit immediate constant.
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bxor_imm",
+            r#"
+        Bitwise xor with immediate.
+
+        Same as `bxor`, but one operand is a zero extended 64 bit immediate constant.
+
+        Polymorphic over all scalar integer types, but does not support vector
+        types.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "rotl",
+            r#"
+        Rotate left.
+
+        Rotate the bits in ``x`` by ``y`` places.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("y", iB).with_doc("Number of bits to shift"),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "rotr",
+            r#"
+        Rotate right.
+
+        Rotate the bits in ``x`` by ``y`` places.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("y", iB).with_doc("Number of bits to shift"),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "rotl_imm",
+            r#"
+        Rotate left by immediate.
+
+        Same as `rotl`, but one operand is a zero extended 64 bit immediate constant.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("Y", &imm.imm64),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "rotr_imm",
+            r#"
+        Rotate right by immediate.
+
+        Same as `rotr`, but one operand is a zero extended 64 bit immediate constant.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("Y", &imm.imm64),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "ishl",
+            r#"
+        Integer shift left. Shift the bits in ``x`` towards the MSB by ``y``
+        places. Shift in zero bits to the LSB.
+
+        The shift amount is masked to the size of ``x``.
+
+        When shifting a B-bits integer type, this instruction computes:
+
+        ```text
+            s &:= y \pmod B,
+            a &:= x \cdot 2^s \pmod{2^B}.
+        ```
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("y", iB).with_doc("Number of bits to shift"),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "ushr",
+            r#"
+        Unsigned shift right. Shift bits in ``x`` towards the LSB by ``y``
+        places, shifting in zero bits to the MSB. Also called a *logical
+        shift*.
+
+        The shift amount is masked to the size of ``x``.
+
+        When shifting a B-bits integer type, this instruction computes:
+
+        ```text
+            s &:= y \pmod B,
+            a &:= \lfloor x \cdot 2^{-s} \rfloor.
+        ```
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("y", iB).with_doc("Number of bits to shift"),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "sshr",
+            r#"
+        Signed shift right. Shift bits in ``x`` towards the LSB by ``y``
+        places, shifting in sign bits to the MSB. Also called an *arithmetic
+        shift*.
+
+        The shift amount is masked to the size of ``x``.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("y", iB).with_doc("Number of bits to shift"),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "ishl_imm",
+            r#"
+        Integer shift left by immediate.
+
+        The shift amount is masked to the size of ``x``.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("Y", &imm.imm64),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "ushr_imm",
+            r#"
+        Unsigned shift right by immediate.
+
+        The shift amount is masked to the size of ``x``.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("Y", &imm.imm64),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "sshr_imm",
+            r#"
+        Signed shift right by immediate.
+
+        The shift amount is masked to the size of ``x``.
+        "#,
+            &formats.binary_imm64,
+        )
+        .operands_in(vec![
+            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
+            Operand::new("Y", &imm.imm64),
+        ])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bitrev",
+            r#"
+        Reverse the bits of a integer.
+
+        Reverses the bits in ``x``.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", iB)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "clz",
+            r#"
+        Count leading zero bits.
+
+        Starting from the MSB in ``x``, count the number of zero bits before
+        reaching the first one bit. When ``x`` is zero, returns the size of x
+        in bits.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", iB)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "cls",
+            r#"
+        Count leading sign bits.
+
+        Starting from the MSB after the sign bit in ``x``, count the number of
+        consecutive bits identical to the sign bit. When ``x`` is 0 or -1,
+        returns one less than the size of x in bits.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", iB)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "ctz",
+            r#"
+        Count trailing zeros.
+
+        Starting from the LSB in ``x``, count the number of zero bits before
+        reaching the first one bit. When ``x`` is zero, returns the size of x
+        in bits.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", iB)])
+        .operands_out(vec![Operand::new("a", iB)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bswap",
+            r#"
+        Reverse the byte order of an integer.
+
+        Reverses the bytes in ``x``.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", iSwappable)])
+        .operands_out(vec![Operand::new("a", iSwappable)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "popcnt",
+            r#"
+        Population count
+
+        Count the number of one bits in ``x``.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Int)])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    let Float = &TypeVar::new(
+        "Float",
+        "A scalar or vector floating point number",
+        TypeSetBuilder::new()
+            .floats(Interval::All)
+            .simd_lanes(Interval::All)
+            .dynamic_simd_lanes(Interval::All)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "fcmp",
+            r#"
+        Floating point comparison.
+
+        Two IEEE 754-2008 floating point numbers, `x` and `y`, relate to each
+        other in exactly one of four ways:
+
+        ```text
+        == ==========================================
+        UN Unordered when one or both numbers is NaN.
+        EQ When `x = y`. (And `0.0 = -0.0`).
+        LT When `x < y`.
+        GT When `x > y`.
+        == ==========================================
+        ```
+
+        The 14 `floatcc` condition codes each correspond to a subset of
+        the four relations, except for the empty set which would always be
+        false, and the full set which would always be true.
+
+        The condition codes are divided into 7 'ordered' conditions which don't
+        include UN, and 7 unordered conditions which all include UN.
+
+        ```text
+        +-------+------------+---------+------------+-------------------------+
+        |Ordered             |Unordered             |Condition                |
+        +=======+============+=========+============+=========================+
+        |ord    |EQ | LT | GT|uno      |UN          |NaNs absent / present.   |
+        +-------+------------+---------+------------+-------------------------+
+        |eq     |EQ          |ueq      |UN | EQ     |Equal                    |
+        +-------+------------+---------+------------+-------------------------+
+        |one    |LT | GT     |ne       |UN | LT | GT|Not equal                |
+        +-------+------------+---------+------------+-------------------------+
+        |lt     |LT          |ult      |UN | LT     |Less than                |
+        +-------+------------+---------+------------+-------------------------+
+        |le     |LT | EQ     |ule      |UN | LT | EQ|Less than or equal       |
+        +-------+------------+---------+------------+-------------------------+
+        |gt     |GT          |ugt      |UN | GT     |Greater than             |
+        +-------+------------+---------+------------+-------------------------+
+        |ge     |GT | EQ     |uge      |UN | GT | EQ|Greater than or equal    |
+        +-------+------------+---------+------------+-------------------------+
+        ```
+
+        The standard C comparison operators, `<, <=, >, >=`, are all ordered,
+        so they are false if either operand is NaN. The C equality operator,
+        `==`, is ordered, and since inequality is defined as the logical
+        inverse it is *unordered*. They map to the `floatcc` condition
+        codes as follows:
+
+        ```text
+        ==== ====== ============
+        C    `Cond` Subset
+        ==== ====== ============
+        `==` eq     EQ
+        `!=` ne     UN | LT | GT
+        `<`  lt     LT
+        `<=` le     LT | EQ
+        `>`  gt     GT
+        `>=` ge     GT | EQ
+        ==== ====== ============
+        ```
+
+        This subset of condition codes also corresponds to the WebAssembly
+        floating point comparisons of the same name.
+
+        When this instruction compares floating point vectors, it returns a
+        vector with the results of lane-wise comparisons.
+
+        When comparing scalars, the result is:
+            - `1` if the condition holds.
+            - `0` if the condition does not hold.
+
+        When comparing vectors, the result is:
+            - `-1` (i.e. all ones) in each lane where the condition holds.
+            - `0` in each lane where the condition does not hold.
+        "#,
+            &formats.float_compare,
+        )
+        .operands_in(vec![
+            Operand::new("Cond", &imm.floatcc),
+            Operand::new("x", Float),
+            Operand::new("y", Float),
+        ])
+        .operands_out(vec![Operand::new("a", &Float.as_truthy())]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fadd",
+            r#"
+        Floating point addition.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fsub",
+            r#"
+        Floating point subtraction.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fmul",
+            r#"
+        Floating point multiplication.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fdiv",
+            r#"
+        Floating point division.
+
+        Unlike the integer division instructions ` and
+        `udiv`, this can't trap. Division by zero is infinity or
+        NaN, depending on the dividend.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "sqrt",
+            r#"
+        Floating point square root.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fma",
+            r#"
+        Floating point fused multiply-and-add.
+
+        Computes `a := xy+z` without any intermediate rounding of the
+        product.
+        "#,
+            &formats.ternary,
+        )
+        .operands_in(vec![
+            Operand::new("x", Float),
+            Operand::new("y", Float),
+            Operand::new("z", Float),
+        ])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fneg",
+            r#"
+        Floating point negation.
+
+        Note that this is a pure bitwise operation.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("``x`` with its sign bit inverted")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fabs",
+            r#"
+        Floating point absolute value.
+
+        Note that this is a pure bitwise operation.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("``x`` with its sign bit cleared")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fcopysign",
+            r#"
+        Floating point copy sign.
+
+        Note that this is a pure bitwise operation. The sign bit from ``y`` is
+        copied to the sign bit of ``x``.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("``x`` with its sign bit changed to that of ``y``")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fmin",
+            r#"
+        Floating point minimum, propagating NaNs using the WebAssembly rules.
+
+        If either operand is NaN, this returns NaN with an unspecified sign. Furthermore, if
+        each input NaN consists of a mantissa whose most significant bit is 1 and the rest is
+        0, then the output has the same form. Otherwise, the output mantissa's most significant
+        bit is 1 and the rest is unspecified.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("The smaller of ``x`` and ``y``")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fmin_pseudo",
+            r#"
+        Floating point pseudo-minimum, propagating NaNs.  This behaves differently from ``fmin``.
+        See <https://github.com/WebAssembly/simd/pull/122> for background.
+
+        The behaviour is defined as ``fmin_pseudo(a, b) = (b < a) ? b : a``, and the behaviour
+        for zero or NaN inputs follows from the behaviour of ``<`` with such inputs.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("The smaller of ``x`` and ``y``")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fmax",
+            r#"
+        Floating point maximum, propagating NaNs using the WebAssembly rules.
+
+        If either operand is NaN, this returns NaN with an unspecified sign. Furthermore, if
+        each input NaN consists of a mantissa whose most significant bit is 1 and the rest is
+        0, then the output has the same form. Otherwise, the output mantissa's most significant
+        bit is 1 and the rest is unspecified.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("The larger of ``x`` and ``y``")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fmax_pseudo",
+            r#"
+        Floating point pseudo-maximum, propagating NaNs.  This behaves differently from ``fmax``.
+        See <https://github.com/WebAssembly/simd/pull/122> for background.
+
+        The behaviour is defined as ``fmax_pseudo(a, b) = (a < b) ? b : a``, and the behaviour
+        for zero or NaN inputs follows from the behaviour of ``<`` with such inputs.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("The larger of ``x`` and ``y``")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "ceil",
+            r#"
+        Round floating point round to integral, towards positive infinity.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("``x`` rounded to integral value")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "floor",
+            r#"
+        Round floating point round to integral, towards negative infinity.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("``x`` rounded to integral value")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "trunc",
+            r#"
+        Round floating point round to integral, towards zero.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("``x`` rounded to integral value")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "nearest",
+            r#"
+        Round floating point round to integral, towards nearest with ties to
+        even.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![
+            Operand::new("a", Float).with_doc("``x`` rounded to integral value")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "is_null",
+            r#"
+        Reference verification.
+
+        The condition code determines if the reference type in question is
+        null or not.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Ref)])
+        .operands_out(vec![Operand::new("a", i8)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "is_invalid",
+            r#"
+        Reference verification.
+
+        The condition code determines if the reference type in question is
+        invalid or not.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Ref)])
+        .operands_out(vec![Operand::new("a", i8)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "bitcast",
+            r#"
+        Reinterpret the bits in `x` as a different type.
+
+        The input and output types must be storable to memory and of the same
+        size. A bitcast is equivalent to storing one type and loading the other
+        type from the same address, both using the specified MemFlags.
+
+        Note that this operation only supports the `big` or `little` MemFlags.
+        The specified byte order only affects the result in the case where
+        input and output types differ in lane count/size.  In this case, the
+        operation is only valid if a byte order specifier is provided.
+        "#,
+            &formats.load_no_offset,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("x", Mem),
+        ])
+        .operands_out(vec![
+            Operand::new("a", MemTo).with_doc("Bits of `x` reinterpreted")
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "scalar_to_vector",
+            r#"
+            Copies a scalar value to a vector value.  The scalar is copied into the
+            least significant lane of the vector, and all other lanes will be zero.
+            "#,
+            &formats.unary,
+        )
+        .operands_in(vec![
+            Operand::new("s", &TxN.lane_of()).with_doc("A scalar value")
+        ])
+        .operands_out(vec![Operand::new("a", TxN).with_doc("A vector value")]),
+    );
+
+    let Truthy = &TypeVar::new(
+        "Truthy",
+        "A scalar whose values are truthy",
+        TypeSetBuilder::new().ints(Interval::All).build(),
+    );
+    let IntTo = &TypeVar::new(
+        "IntTo",
+        "An integer type",
+        TypeSetBuilder::new().ints(Interval::All).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "bmask",
+            r#"
+        Convert `x` to an integer mask.
+
+        Non-zero maps to all 1s and zero maps to all 0s.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Truthy)])
+        .operands_out(vec![Operand::new("a", IntTo)]),
+    );
+
+    let Int = &TypeVar::new(
+        "Int",
+        "A scalar integer type",
+        TypeSetBuilder::new().ints(Interval::All).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "ireduce",
+            r#"
+        Convert `x` to a smaller integer type by discarding
+        the most significant bits.
+
+        This is the same as reducing modulo `2^n`.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", &Int.wider())
+            .with_doc("A scalar integer type, wider than the controlling type")])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    let I16or32or64xN = &TypeVar::new(
+        "I16or32or64xN",
+        "A SIMD vector type containing integer lanes 16, 32, or 64 bits wide",
+        TypeSetBuilder::new()
+            .ints(16..64)
+            .simd_lanes(2..8)
+            .dynamic_simd_lanes(2..8)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "snarrow",
+            r#"
+        Combine `x` and `y` into a vector with twice the lanes but half the integer width while
+        saturating overflowing values to the signed maximum and minimum.
+
+        The lanes will be concatenated after narrowing. For example, when `x` and `y` are `i32x4`
+        and `x = [x3, x2, x1, x0]` and `y = [y3, y2, y1, y0]`, then after narrowing the value
+        returned is an `i16x8`: `a = [y3', y2', y1', y0', x3', x2', x1', x0']`.
+            "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", I16or32or64xN),
+            Operand::new("y", I16or32or64xN),
+        ])
+        .operands_out(vec![Operand::new("a", &I16or32or64xN.split_lanes())]),
+    );
+
+    ig.push(
+        Inst::new(
+            "unarrow",
+            r#"
+        Combine `x` and `y` into a vector with twice the lanes but half the integer width while
+        saturating overflowing values to the unsigned maximum and minimum.
+
+        Note that all input lanes are considered signed: any negative lanes will overflow and be
+        replaced with the unsigned minimum, `0x00`.
+
+        The lanes will be concatenated after narrowing. For example, when `x` and `y` are `i32x4`
+        and `x = [x3, x2, x1, x0]` and `y = [y3, y2, y1, y0]`, then after narrowing the value
+        returned is an `i16x8`: `a = [y3', y2', y1', y0', x3', x2', x1', x0']`.
+            "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", I16or32or64xN),
+            Operand::new("y", I16or32or64xN),
+        ])
+        .operands_out(vec![Operand::new("a", &I16or32or64xN.split_lanes())]),
+    );
+
+    ig.push(
+        Inst::new(
+            "uunarrow",
+            r#"
+        Combine `x` and `y` into a vector with twice the lanes but half the integer width while
+        saturating overflowing values to the unsigned maximum and minimum.
+
+        Note that all input lanes are considered unsigned: any negative values will be interpreted as unsigned, overflowing and being replaced with the unsigned maximum.
+
+        The lanes will be concatenated after narrowing. For example, when `x` and `y` are `i32x4`
+        and `x = [x3, x2, x1, x0]` and `y = [y3, y2, y1, y0]`, then after narrowing the value
+        returned is an `i16x8`: `a = [y3', y2', y1', y0', x3', x2', x1', x0']`.
+            "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", I16or32or64xN), Operand::new("y", I16or32or64xN)])
+        .operands_out(vec![Operand::new("a", &I16or32or64xN.split_lanes())]),
+    );
+
+    let I8or16or32xN = &TypeVar::new(
+        "I8or16or32xN",
+        "A SIMD vector type containing integer lanes 8, 16, or 32 bits wide.",
+        TypeSetBuilder::new()
+            .ints(8..32)
+            .simd_lanes(2..16)
+            .dynamic_simd_lanes(2..16)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "swiden_low",
+            r#"
+        Widen the low lanes of `x` using signed extension.
+
+        This will double the lane width and halve the number of lanes.
+            "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", I8or16or32xN)])
+        .operands_out(vec![Operand::new("a", &I8or16or32xN.merge_lanes())]),
+    );
+
+    ig.push(
+        Inst::new(
+            "swiden_high",
+            r#"
+        Widen the high lanes of `x` using signed extension.
+
+        This will double the lane width and halve the number of lanes.
+            "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", I8or16or32xN)])
+        .operands_out(vec![Operand::new("a", &I8or16or32xN.merge_lanes())]),
+    );
+
+    ig.push(
+        Inst::new(
+            "uwiden_low",
+            r#"
+        Widen the low lanes of `x` using unsigned extension.
+
+        This will double the lane width and halve the number of lanes.
+            "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", I8or16or32xN)])
+        .operands_out(vec![Operand::new("a", &I8or16or32xN.merge_lanes())]),
+    );
+
+    ig.push(
+        Inst::new(
+            "uwiden_high",
+            r#"
+            Widen the high lanes of `x` using unsigned extension.
+
+            This will double the lane width and halve the number of lanes.
+            "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", I8or16or32xN)])
+        .operands_out(vec![Operand::new("a", &I8or16or32xN.merge_lanes())]),
+    );
+
+    ig.push(
+        Inst::new(
+            "iadd_pairwise",
+            r#"
+        Does lane-wise integer pairwise addition on two operands, putting the
+        combined results into a single vector result. Here a pair refers to adjacent
+        lanes in a vector, i.e. i*2 + (i*2+1) for i == num_lanes/2. The first operand
+        pairwise add results will make up the low half of the resulting vector while
+        the second operand pairwise add results will make up the upper half of the
+        resulting vector.
+            "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("x", I8or16or32xN),
+            Operand::new("y", I8or16or32xN),
+        ])
+        .operands_out(vec![Operand::new("a", I8or16or32xN)]),
+    );
+
+    let I8x16 = &TypeVar::new(
+        "I8x16",
+        "A SIMD vector type consisting of 16 lanes of 8-bit integers",
+        TypeSetBuilder::new()
+            .ints(8..8)
+            .simd_lanes(16..16)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "x86_pmaddubsw",
+            r#"
+        An instruction with equivalent semantics to `pmaddubsw` on x86.
+
+        This instruction will take signed bytes from the first argument and
+        multiply them against unsigned bytes in the second argument. Adjacent
+        pairs are then added, with saturating, to a 16-bit value and are packed
+        into the result.
+            "#,
+            &formats.binary,
+        )
+        .operands_in(vec![Operand::new("x", I8x16), Operand::new("y", I8x16)])
+        .operands_out(vec![Operand::new("a", I16x8)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "uextend",
+            r#"
+        Convert `x` to a larger integer type by zero-extending.
+
+        Each lane in `x` is converted to a larger integer type by adding
+        zeroes. The result has the same numerical value as `x` when both are
+        interpreted as unsigned integers.
+
+        The result type must have the same number of vector lanes as the input,
+        and each lane must not have fewer bits that the input lanes. If the
+        input and output types are the same, this is a no-op.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", &Int.narrower()).with_doc(
+            "A scalar integer type, narrower than the controlling type",
+        )])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "sextend",
+            r#"
+        Convert `x` to a larger integer type by sign-extending.
+
+        Each lane in `x` is converted to a larger integer type by replicating
+        the sign bit. The result has the same numerical value as `x` when both
+        are interpreted as signed integers.
+
+        The result type must have the same number of vector lanes as the input,
+        and each lane must not have fewer bits that the input lanes. If the
+        input and output types are the same, this is a no-op.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", &Int.narrower()).with_doc(
+            "A scalar integer type, narrower than the controlling type",
+        )])
+        .operands_out(vec![Operand::new("a", Int)]),
+    );
+
+    let FloatScalar = &TypeVar::new(
+        "FloatScalar",
+        "A scalar only floating point number",
+        TypeSetBuilder::new().floats(Interval::All).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "fpromote",
+            r#"
+        Convert `x` to a larger floating point format.
+
+        Each lane in `x` is converted to the destination floating point format.
+        This is an exact operation.
+
+        Cranelift currently only supports two floating point formats
+        - `f32` and `f64`. This may change in the future.
+
+        The result type must have the same number of vector lanes as the input,
+        and the result lanes must not have fewer bits than the input lanes.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", &FloatScalar.narrower()).with_doc(
+            "A scalar only floating point number, narrower than the controlling type",
+        )])
+        .operands_out(vec![Operand::new("a", FloatScalar)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fdemote",
+            r#"
+        Convert `x` to a smaller floating point format.
+
+        Each lane in `x` is converted to the destination floating point format
+        by rounding to nearest, ties to even.
+
+        Cranelift currently only supports two floating point formats
+        - `f32` and `f64`. This may change in the future.
+
+        The result type must have the same number of vector lanes as the input,
+        and the result lanes must not have more bits than the input lanes.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", &FloatScalar.wider()).with_doc(
+            "A scalar only floating point number, wider than the controlling type",
+        )])
+        .operands_out(vec![Operand::new("a", FloatScalar)]),
+    );
+
+    let F64x2 = &TypeVar::new(
+        "F64x2",
+        "A SIMD vector type consisting of 2 lanes of 64-bit floats",
+        TypeSetBuilder::new()
+            .floats(64..64)
+            .simd_lanes(2..2)
+            .includes_scalars(false)
+            .build(),
+    );
+    let F32x4 = &TypeVar::new(
+        "F32x4",
+        "A SIMD vector type consisting of 4 lanes of 32-bit floats",
+        TypeSetBuilder::new()
+            .floats(32..32)
+            .simd_lanes(4..4)
+            .includes_scalars(false)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "fvdemote",
+            r#"
+                Convert `x` to a smaller floating point format.
+
+                Each lane in `x` is converted to the destination floating point format
+                by rounding to nearest, ties to even.
+
+                Cranelift currently only supports two floating point formats
+                - `f32` and `f64`. This may change in the future.
+
+                Fvdemote differs from fdemote in that with fvdemote it targets vectors.
+                Fvdemote is constrained to having the input type being F64x2 and the result
+                type being F32x4. The result lane that was the upper half of the input lane
+                is initialized to zero.
+                "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", F64x2)])
+        .operands_out(vec![Operand::new("a", F32x4)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fvpromote_low",
+            r#"
+        Converts packed single precision floating point to packed double precision floating point.
+
+        Considering only the lower half of the register, the low lanes in `x` are interpreted as
+        single precision floats that are then converted to a double precision floats.
+
+        The result type will have half the number of vector lanes as the input. Fvpromote_low is
+        constrained to input F32x4 with a result type of F64x2.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("a", F32x4)])
+        .operands_out(vec![Operand::new("x", F64x2)]),
+    );
+
+    let IntTo = &TypeVar::new(
+        "IntTo",
+        "An scalar only integer type",
+        TypeSetBuilder::new().ints(Interval::All).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "fcvt_to_uint",
+            r#"
+        Converts floating point scalars to unsigned integer.
+
+        Only operates on `x` if it is a scalar. If `x` is NaN or if
+        the unsigned integral value cannot be represented in the result
+        type, this instruction traps.
+
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", FloatScalar)])
+        .operands_out(vec![Operand::new("a", IntTo)])
+        .can_trap()
+        .side_effects_idempotent(),
+    );
+
+    ig.push(
+        Inst::new(
+            "fcvt_to_sint",
+            r#"
+        Converts floating point scalars to signed integer.
+
+        Only operates on `x` if it is a scalar. If `x` is NaN or if
+        the unsigned integral value cannot be represented in the result
+        type, this instruction traps.
+
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", FloatScalar)])
+        .operands_out(vec![Operand::new("a", IntTo)])
+        .can_trap()
+        .side_effects_idempotent(),
+    );
+
+    let IntTo = &TypeVar::new(
+        "IntTo",
+        "A larger integer type with the same number of lanes",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .simd_lanes(Interval::All)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "fcvt_to_uint_sat",
+            r#"
+        Convert floating point to unsigned integer as fcvt_to_uint does, but
+        saturates the input instead of trapping. NaN and negative values are
+        converted to 0.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![Operand::new("a", IntTo)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fcvt_to_sint_sat",
+            r#"
+        Convert floating point to signed integer as fcvt_to_sint does, but
+        saturates the input instead of trapping. NaN values are converted to 0.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![Operand::new("a", IntTo)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "x86_cvtt2dq",
+            r#"
+        A float-to-integer conversion instruction for vectors-of-floats which
+        has the same semantics as `cvttp{s,d}2dq` on x86. This specifically
+        returns `INT_MIN` for NaN or out-of-bounds lanes.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Float)])
+        .operands_out(vec![Operand::new("a", IntTo)]),
+    );
+
+    let Int = &TypeVar::new(
+        "Int",
+        "A scalar or vector integer type",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .simd_lanes(Interval::All)
+            .build(),
+    );
+
+    let FloatTo = &TypeVar::new(
+        "FloatTo",
+        "A scalar or vector floating point number",
+        TypeSetBuilder::new()
+            .floats(Interval::All)
+            .simd_lanes(Interval::All)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "fcvt_from_uint",
+            r#"
+        Convert unsigned integer to floating point.
+
+        Each lane in `x` is interpreted as an unsigned integer and converted to
+        floating point using round to nearest, ties to even.
+
+        The result type must have the same number of vector lanes as the input.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Int)])
+        .operands_out(vec![Operand::new("a", FloatTo)]),
+    );
+
+    ig.push(
+        Inst::new(
+            "fcvt_from_sint",
+            r#"
+        Convert signed integer to floating point.
+
+        Each lane in `x` is interpreted as a signed integer and converted to
+        floating point using round to nearest, ties to even.
+
+        The result type must have the same number of vector lanes as the input.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", Int)])
+        .operands_out(vec![Operand::new("a", FloatTo)]),
+    );
+
+    let WideInt = &TypeVar::new(
+        "WideInt",
+        "An integer type of width `i16` upwards",
+        TypeSetBuilder::new().ints(16..128).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "isplit",
+            r#"
+        Split an integer into low and high parts.
+
+        Vectors of integers are split lane-wise, so the results have the same
+        number of lanes as the input, but the lanes are half the size.
+
+        Returns the low half of `x` and the high half of `x` as two independent
+        values.
+        "#,
+            &formats.unary,
+        )
+        .operands_in(vec![Operand::new("x", WideInt)])
+        .operands_out(vec![
+            Operand::new("lo", &WideInt.half_width()).with_doc("The low bits of `x`"),
+            Operand::new("hi", &WideInt.half_width()).with_doc("The high bits of `x`"),
+        ]),
+    );
+
+    ig.push(
+        Inst::new(
+            "iconcat",
+            r#"
+        Concatenate low and high bits to form a larger integer type.
+
+        Vectors of integers are concatenated lane-wise such that the result has
+        the same number of lanes as the inputs, but the lanes are twice the
+        size.
+        "#,
+            &formats.binary,
+        )
+        .operands_in(vec![
+            Operand::new("lo", NarrowInt),
+            Operand::new("hi", NarrowInt),
+        ])
+        .operands_out(vec![Operand::new("a", &NarrowInt.double_width())
+            .with_doc("The concatenation of `lo` and `hi`")]),
+    );
+
+    // Instructions relating to atomic memory accesses and fences
+    let AtomicMem = &TypeVar::new(
+        "AtomicMem",
+        "Any type that can be stored in memory, which can be used in an atomic operation",
+        TypeSetBuilder::new().ints(8..64).build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "atomic_rmw",
+            r#"
+        Atomically read-modify-write memory at `p`, with second operand `x`.  The old value is
+        returned.  `p` has the type of the target word size, and `x` may be an integer type of
+        8, 16, 32 or 64 bits, even on a 32-bit target.  The type of the returned value is the
+        same as the type of `x`.  This operation is sequentially consistent and creates
+        happens-before edges that order normal (non-atomic) loads and stores.
+        "#,
+            &formats.atomic_rmw,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("AtomicRmwOp", &imm.atomic_rmw_op),
+            Operand::new("p", iAddr),
+            Operand::new("x", AtomicMem).with_doc("Value to be atomically stored"),
+        ])
+        .operands_out(vec![
+            Operand::new("a", AtomicMem).with_doc("Value atomically loaded")
+        ])
+        .can_load()
+        .can_store()
+        .other_side_effects(),
+    );
+
+    ig.push(
+        Inst::new(
+            "atomic_cas",
+            r#"
+        Perform an atomic compare-and-swap operation on memory at `p`, with expected value `e`,
+        storing `x` if the value at `p` equals `e`.  The old value at `p` is returned,
+        regardless of whether the operation succeeds or fails.  `p` has the type of the target
+        word size, and `x` and `e` must have the same type and the same size, which may be an
+        integer type of 8, 16, 32 or 64 bits, even on a 32-bit target.  The type of the returned
+        value is the same as the type of `x` and `e`.  This operation is sequentially
+        consistent and creates happens-before edges that order normal (non-atomic) loads and
+        stores.
+        "#,
+            &formats.atomic_cas,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+            Operand::new("e", AtomicMem).with_doc("Expected value in CAS"),
+            Operand::new("x", AtomicMem).with_doc("Value to be atomically stored"),
+        ])
+        .operands_out(vec![
+            Operand::new("a", AtomicMem).with_doc("Value atomically loaded")
+        ])
+        .can_load()
+        .can_store()
+        .other_side_effects(),
+    );
+
+    ig.push(
+        Inst::new(
+            "atomic_load",
+            r#"
+        Atomically load from memory at `p`.
+
+        This is a polymorphic instruction that can load any value type which has a memory
+        representation.  It should only be used for integer types with 8, 16, 32 or 64 bits.
+        This operation is sequentially consistent and creates happens-before edges that order
+        normal (non-atomic) loads and stores.
+        "#,
+            &formats.load_no_offset,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("p", iAddr),
+        ])
+        .operands_out(vec![
+            Operand::new("a", AtomicMem).with_doc("Value atomically loaded")
+        ])
+        .can_load()
+        .other_side_effects(),
+    );
+
+    ig.push(
+        Inst::new(
+            "atomic_store",
+            r#"
+        Atomically store `x` to memory at `p`.
+
+        This is a polymorphic instruction that can store any value type with a memory
+        representation.  It should only be used for integer types with 8, 16, 32 or 64 bits.
+        This operation is sequentially consistent and creates happens-before edges that order
+        normal (non-atomic) loads and stores.
+        "#,
+            &formats.store_no_offset,
+        )
+        .operands_in(vec![
+            Operand::new("MemFlags", &imm.memflags),
+            Operand::new("x", AtomicMem).with_doc("Value to be atomically stored"),
+            Operand::new("p", iAddr),
+        ])
+        .can_store()
+        .other_side_effects(),
+    );
+
+    ig.push(
+        Inst::new(
+            "fence",
+            r#"
+        A memory fence.  This must provide ordering to ensure that, at a minimum, neither loads
+        nor stores of any kind may move forwards or backwards across the fence.  This operation
+        is sequentially consistent.
+        "#,
+            &formats.nullary,
+        )
+        .other_side_effects(),
+    );
+
+    let TxN = &TypeVar::new(
+        "TxN",
+        "A dynamic vector type",
+        TypeSetBuilder::new()
+            .ints(Interval::All)
+            .floats(Interval::All)
+            .dynamic_simd_lanes(Interval::All)
+            .build(),
+    );
+
+    ig.push(
+        Inst::new(
+            "extract_vector",
+            r#"
+        Return a fixed length sub vector, extracted from a dynamic vector.
+        "#,
+            &formats.binary_imm8,
+        )
+        .operands_in(vec![
+            Operand::new("x", TxN).with_doc("The dynamic vector to extract from"),
+            Operand::new("y", &imm.uimm8).with_doc("128-bit vector index"),
+        ])
+        .operands_out(vec![
+            Operand::new("a", &TxN.dynamic_to_vector()).with_doc("New fixed vector")
+        ]),
+    );
+}