wasmtime 10.0.1 → 11.0.0

data/ext/cargo-vendor/cranelift-codegen-0.98.1/src/machinst/abi.rs

@@ -0,0 +1,2605 @@
+//! Implementation of a vanilla ABI, shared between several machines. The
+//! implementation here assumes that arguments will be passed in registers
+//! first, then additional args on the stack; that the stack grows downward,
+//! contains a standard frame (return address and frame pointer), and the
+//! compiler is otherwise free to allocate space below that with its choice of
+//! layout; and that the machine has some notion of caller- and callee-save
+//! registers. Most modern machines, e.g. x86-64 and AArch64, should fit this
+//! mold and thus both of these backends use this shared implementation.
+//!
+//! See the documentation in specific machine backends for the "instantiation"
+//! of this generic ABI, i.e., which registers are caller/callee-save, arguments
+//! and return values, and any other special requirements.
+//!
+//! For now the implementation here assumes a 64-bit machine, but we intend to
+//! make this 32/64-bit-generic shortly.
+//!
+//! # Vanilla ABI
+//!
+//! First, arguments and return values are passed in registers up to a certain
+//! fixed count, after which they overflow onto the stack. Multiple return
+//! values either fit in registers, or are returned in a separate return-value
+//! area on the stack, given by a hidden extra parameter.
+//!
+//! Note that the exact stack layout is up to us. We settled on the
+//! below design based on several requirements. In particular, we need
+//! to be able to generate instructions (or instruction sequences) to
+//! access arguments, stack slots, and spill slots before we know how
+//! many spill slots or clobber-saves there will be, because of our
+//! pass structure. We also prefer positive offsets to negative
+//! offsets because of an asymmetry in some machines' addressing modes
+//! (e.g., on AArch64, positive offsets have a larger possible range
+//! without a long-form sequence to synthesize an arbitrary
+//! offset). We also need clobber-save registers to be "near" the
+//! frame pointer: Windows unwind information requires it to be within
+//! 240 bytes of RBP. Finally, it is not allowed to access memory
+//! below the current SP value.
+//!
+//! We assume that a prologue first pushes the frame pointer (and
+//! return address above that, if the machine does not do that in
+//! hardware). We set FP to point to this two-word frame record. We
+//! store all other frame slots below this two-word frame record, with
+//! the stack pointer remaining at or below this fixed frame storage
+//! for the rest of the function. We can then access frame storage
+//! slots using positive offsets from SP. In order to allow codegen
+//! for the latter before knowing how SP might be adjusted around
+//! callsites, we implement a "nominal SP" tracking feature by which a
+//! fixup (distance between actual SP and a "nominal" SP) is known at
+//! each instruction.
+//!
+//! Note that if we ever support dynamic stack-space allocation (for
+//! `alloca`), we will need a way to reference spill slots and stack
+//! slots without "nominal SP", because we will no longer be able to
+//! know a static offset from SP to the slots at any particular
+//! program point. Probably the best solution at that point will be to
+//! revert to using the frame pointer as the reference for all slots,
+//! and creating a "nominal FP" synthetic addressing mode (analogous
+//! to "nominal SP" today) to allow generating spill/reload and
+//! stackslot accesses before we know how large the clobber-saves will
+//! be.
+//!
+//! # Stack Layout
+//!
+//! The stack looks like:
+//!
+//! ```plain
+//!   (high address)
+//!
+//!                              +---------------------------+
+//!                              |          ...              |
+//!                              | stack args                |
+//!                              | (accessed via FP)         |
+//!                              +---------------------------+
+//! SP at function entry ----->  | return address            |
+//!                              +---------------------------+
+//! FP after prologue -------->  | FP (pushed by prologue)   |
+//!                              +---------------------------+
+//!                              |          ...              |
+//!                              | clobbered callee-saves    |
+//! unwind-frame base     ---->  | (pushed by prologue)      |
+//!                              +---------------------------+
+//!                              |          ...              |
+//!                              | spill slots               |
+//!                              | (accessed via nominal SP) |
+//!                              |          ...              |
+//!                              | stack slots               |
+//!                              | (accessed via nominal SP) |
+//! nominal SP --------------->  | (alloc'd by prologue)     |
+//! (SP at end of prologue)      +---------------------------+
+//!                              | [alignment as needed]     |
+//!                              |          ...              |
+//!                              | args for call             |
+//! SP before making a call -->  | (pushed at callsite)      |
+//!                              +---------------------------+
+//!
+//!   (low address)
+//! ```
+//!
+//! # Multi-value Returns
+//!
+//! We support multi-value returns by using multiple return-value
+//! registers. In some cases this is an extension of the base system
+//! ABI. See each platform's `abi.rs` implementation for details.
+
+use crate::binemit::StackMap;
+use crate::entity::{PrimaryMap, SecondaryMap};
+use crate::fx::FxHashMap;
+use crate::ir::types::*;
+use crate::ir::{ArgumentExtension, ArgumentPurpose, DynamicStackSlot, Signature, StackSlot};
+use crate::isa::TargetIsa;
+use crate::settings;
+use crate::settings::ProbestackStrategy;
+use crate::{ir, isa};
+use crate::{machinst::*, trace};
+use crate::{CodegenError, CodegenResult};
+use alloc::vec::Vec;
+use regalloc2::{PReg, PRegSet};
+use smallvec::{smallvec, SmallVec};
+use std::collections::HashMap;
+use std::convert::TryFrom;
+use std::marker::PhantomData;
+use std::mem;
+
+/// A small vector of instructions (with some reasonable size); appropriate for
+/// a small fixed sequence implementing one operation.
+pub type SmallInstVec<I> = SmallVec<[I; 4]>;
+
+/// A type used by backends to track argument-binding info in the "args"
+/// pseudoinst. The pseudoinst holds a vec of `ArgPair` structs.
+#[derive(Clone, Debug)]
+pub struct ArgPair {
+    /// The vreg that is defined by this args pseudoinst.
+    pub vreg: Writable<Reg>,
+    /// The preg that the arg arrives in; this constrains the vreg's
+    /// placement at the pseudoinst.
+    pub preg: Reg,
+}
+
+/// A type used by backends to track return register binding info in the "ret"
+/// pseudoinst. The pseudoinst holds a vec of `RetPair` structs.
+#[derive(Clone, Debug)]
+pub struct RetPair {
+    /// The vreg that is returned by this pseudionst.
+    pub vreg: Reg,
+    /// The preg that the arg is returned through; this constrains the vreg's
+    /// placement at the pseudoinst.
+    pub preg: Reg,
+}
+
+/// A location for (part of) an argument or return value. These "storage slots"
+/// are specified for each register-sized part of an argument.
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+pub enum ABIArgSlot {
+    /// In a real register.
+    Reg {
+        /// Register that holds this arg.
+        reg: RealReg,
+        /// Value type of this arg.
+        ty: ir::Type,
+        /// Should this arg be zero- or sign-extended?
+        extension: ir::ArgumentExtension,
+    },
+    /// Arguments only: on stack, at given offset from SP at entry.
+    Stack {
+        /// Offset of this arg relative to the base of stack args.
+        offset: i64,
+        /// Value type of this arg.
+        ty: ir::Type,
+        /// Should this arg be zero- or sign-extended?
+        extension: ir::ArgumentExtension,
+    },
+}
+
+impl ABIArgSlot {
+    /// The type of the value that will be stored in this slot.
+    pub fn get_type(&self) -> ir::Type {
+        match self {
+            ABIArgSlot::Reg { ty, .. } => *ty,
+            ABIArgSlot::Stack { ty, .. } => *ty,
+        }
+    }
+}
+
+/// A vector of `ABIArgSlot`s. Inline capacity for one element because basically
+/// 100% of values use one slot. Only `i128`s need multiple slots, and they are
+/// super rare (and never happen with Wasm).
+pub type ABIArgSlotVec = SmallVec<[ABIArgSlot; 1]>;
+
+/// An ABIArg is composed of one or more parts. This allows for a CLIF-level
+/// Value to be passed with its parts in more than one location at the ABI
+/// level. For example, a 128-bit integer may be passed in two 64-bit registers,
+/// or even a 64-bit register and a 64-bit stack slot, on a 64-bit machine. The
+/// number of "parts" should correspond to the number of registers used to store
+/// this type according to the machine backend.
+///
+/// As an invariant, the `purpose` for every part must match. As a further
+/// invariant, a `StructArg` part cannot appear with any other part.
+#[derive(Clone, Debug)]
+pub enum ABIArg {
+    /// Storage slots (registers or stack locations) for each part of the
+    /// argument value. The number of slots must equal the number of register
+    /// parts used to store a value of this type.
+    Slots {
+        /// Slots, one per register part.
+        slots: ABIArgSlotVec,
+        /// Purpose of this arg.
+        purpose: ir::ArgumentPurpose,
+    },
+    /// Structure argument. We reserve stack space for it, but the CLIF-level
+    /// semantics are a little weird: the value passed to the call instruction,
+    /// and received in the corresponding block param, is a *pointer*. On the
+    /// caller side, we memcpy the data from the passed-in pointer to the stack
+    /// area; on the callee side, we compute a pointer to this stack area and
+    /// provide that as the argument's value.
+    StructArg {
+        /// Register or stack slot holding a pointer to the buffer as passed
+        /// by the caller to the callee.  If None, the ABI defines the buffer
+        /// to reside at a well-known location (i.e. at `offset` below).
+        pointer: Option<ABIArgSlot>,
+        /// Offset of this arg relative to base of stack args.
+        offset: i64,
+        /// Size of this arg on the stack.
+        size: u64,
+        /// Purpose of this arg.
+        purpose: ir::ArgumentPurpose,
+    },
+    /// Implicit argument. Similar to a StructArg, except that we have the
+    /// target type, not a pointer type, at the CLIF-level. This argument is
+    /// still being passed via reference implicitly.
+    ImplicitPtrArg {
+        /// Register or stack slot holding a pointer to the buffer.
+        pointer: ABIArgSlot,
+        /// Offset of the argument buffer.
+        offset: i64,
+        /// Type of the implicit argument.
+        ty: Type,
+        /// Purpose of this arg.
+        purpose: ir::ArgumentPurpose,
+    },
+}
+
+impl ABIArg {
+    /// Create an ABIArg from one register.
+    pub fn reg(
+        reg: RealReg,
+        ty: ir::Type,
+        extension: ir::ArgumentExtension,
+        purpose: ir::ArgumentPurpose,
+    ) -> ABIArg {
+        ABIArg::Slots {
+            slots: smallvec![ABIArgSlot::Reg { reg, ty, extension }],
+            purpose,
+        }
+    }
+
+    /// Create an ABIArg from one stack slot.
+    pub fn stack(
+        offset: i64,
+        ty: ir::Type,
+        extension: ir::ArgumentExtension,
+        purpose: ir::ArgumentPurpose,
+    ) -> ABIArg {
+        ABIArg::Slots {
+            slots: smallvec![ABIArgSlot::Stack {
+                offset,
+                ty,
+                extension,
+            }],
+            purpose,
+        }
+    }
+}
+
+/// Are we computing information about arguments or return values? Much of the
+/// handling is factored out into common routines; this enum allows us to
+/// distinguish which case we're handling.
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+pub enum ArgsOrRets {
+    /// Arguments.
+    Args,
+    /// Return values.
+    Rets,
+}
+
+/// Abstract location for a machine-specific ABI impl to translate into the
+/// appropriate addressing mode.
+#[derive(Clone, Copy, Debug)]
+pub enum StackAMode {
+    /// Offset from the frame pointer, possibly making use of a specific type
+    /// for a scaled indexing operation.
+    FPOffset(i64, ir::Type),
+    /// Offset from the nominal stack pointer, possibly making use of a specific
+    /// type for a scaled indexing operation.
+    NominalSPOffset(i64, ir::Type),
+    /// Offset from the real stack pointer, possibly making use of a specific
+    /// type for a scaled indexing operation.
+    SPOffset(i64, ir::Type),
+}
+
+impl StackAMode {
+    /// Offset by an addend.
+    pub fn offset(self, addend: i64) -> Self {
+        match self {
+            StackAMode::FPOffset(off, ty) => StackAMode::FPOffset(off + addend, ty),
+            StackAMode::NominalSPOffset(off, ty) => StackAMode::NominalSPOffset(off + addend, ty),
+            StackAMode::SPOffset(off, ty) => StackAMode::SPOffset(off + addend, ty),
+        }
+    }
+}
+
+/// Trait implemented by machine-specific backend to represent ISA flags.
+pub trait IsaFlags: Clone {
+    /// Get a flag indicating whether forward-edge CFI is enabled.
+    fn is_forward_edge_cfi_enabled(&self) -> bool {
+        false
+    }
+}
+
+/// Used as an out-parameter to accumulate a sequence of `ABIArg`s in
+/// `ABIMachineSpec::compute_arg_locs`. Wraps the shared allocation for all
+/// `ABIArg`s in `SigSet` and exposes just the args for the current
+/// `compute_arg_locs` call.
+pub struct ArgsAccumulator<'a> {
+    sig_set_abi_args: &'a mut Vec<ABIArg>,
+    start: usize,
+    non_formal_flag: bool,
+}
+
+impl<'a> ArgsAccumulator<'a> {
+    fn new(sig_set_abi_args: &'a mut Vec<ABIArg>) -> Self {
+        let start = sig_set_abi_args.len();
+        ArgsAccumulator {
+            sig_set_abi_args,
+            start,
+            non_formal_flag: false,
+        }
+    }
+
+    #[inline]
+    pub fn push(&mut self, arg: ABIArg) {
+        debug_assert!(!self.non_formal_flag);
+        self.sig_set_abi_args.push(arg)
+    }
+
+    #[inline]
+    pub fn push_non_formal(&mut self, arg: ABIArg) {
+        self.non_formal_flag = true;
+        self.sig_set_abi_args.push(arg)
+    }
+
+    #[inline]
+    pub fn args(&self) -> &[ABIArg] {
+        &self.sig_set_abi_args[self.start..]
+    }
+
+    #[inline]
+    pub fn args_mut(&mut self) -> &mut [ABIArg] {
+        &mut self.sig_set_abi_args[self.start..]
+    }
+}
+
+/// Trait implemented by machine-specific backend to provide information about
+/// register assignments and to allow generating the specific instructions for
+/// stack loads/saves, prologues/epilogues, etc.
+pub trait ABIMachineSpec {
+    /// The instruction type.
+    type I: VCodeInst;
+
+    /// The ISA flags type.
+    type F: IsaFlags;
+
+    /// Returns the number of bits in a word, that is 32/64 for 32/64-bit architecture.
+    fn word_bits() -> u32;
+
+    /// Returns the number of bytes in a word.
+    fn word_bytes() -> u32 {
+        return Self::word_bits() / 8;
+    }
+
+    /// Returns word-size integer type.
+    fn word_type() -> Type {
+        match Self::word_bits() {
+            32 => I32,
+            64 => I64,
+            _ => unreachable!(),
+        }
+    }
+
+    /// Returns word register class.
+    fn word_reg_class() -> RegClass {
+        RegClass::Int
+    }
+
+    /// Returns required stack alignment in bytes.
+    fn stack_align(call_conv: isa::CallConv) -> u32;
+
+    /// Process a list of parameters or return values and allocate them to registers
+    /// and stack slots.
+    ///
+    /// The argument locations should be pushed onto the given `ArgsAccumulator`
+    /// in order. Any extra arguments added (such as return area pointers)
+    /// should come at the end of the list so that the first N lowered
+    /// parameters align with the N clif parameters.
+    ///
+    /// Returns the stack-space used (rounded up to as alignment requires), and
+    /// if `add_ret_area_ptr` was passed, the index of the extra synthetic arg
+    /// that was added.
+    fn compute_arg_locs<'a, I>(
+        call_conv: isa::CallConv,
+        flags: &settings::Flags,
+        params: I,
+        args_or_rets: ArgsOrRets,
+        add_ret_area_ptr: bool,
+        args: ArgsAccumulator<'_>,
+    ) -> CodegenResult<(u32, Option<usize>)>
+    where
+        I: IntoIterator<Item = &'a ir::AbiParam>;
+
+    /// Returns the offset from FP to the argument area, i.e., jumping over the saved FP, return
+    /// address, and maybe other standard elements depending on ABI (e.g. Wasm TLS reg).
+    fn fp_to_arg_offset(call_conv: isa::CallConv, flags: &settings::Flags) -> i64;
+
+    /// Generate a load from the stack.
+    fn gen_load_stack(mem: StackAMode, into_reg: Writable<Reg>, ty: Type) -> Self::I;
+
+    /// Generate a store to the stack.
+    fn gen_store_stack(mem: StackAMode, from_reg: Reg, ty: Type) -> Self::I;
+
+    /// Generate a move.
+    fn gen_move(to_reg: Writable<Reg>, from_reg: Reg, ty: Type) -> Self::I;
+
+    /// Generate an integer-extend operation.
+    fn gen_extend(
+        to_reg: Writable<Reg>,
+        from_reg: Reg,
+        is_signed: bool,
+        from_bits: u8,
+        to_bits: u8,
+    ) -> Self::I;
+
+    /// Generate an "args" pseudo-instruction to capture input args in
+    /// registers.
+    fn gen_args(isa_flags: &Self::F, args: Vec<ArgPair>) -> Self::I;
+
+    /// Generate a return instruction.
+    ///
+    /// Optionally given non-zero number of additional stack bytes to pop after
+    /// popping the return address from the stack, if any, and just before the
+    /// actual return. This is used by the "tail" calling convention to clean up
+    /// stack arguments in the callee because we cannot rely on the caller to do
+    /// it.
+    fn gen_ret(
+        setup_frame: bool,
+        isa_flags: &Self::F,
+        rets: Vec<RetPair>,
+        stack_bytes_to_pop: u32,
+    ) -> Self::I;
+
+    /// Generate an add-with-immediate. Note that even if this uses a scratch
+    /// register, it must satisfy two requirements:
+    ///
+    /// - The add-imm sequence must only clobber caller-save registers that are
+    ///   not used for arguments, because it will be placed in the prologue
+    ///   before the clobbered callee-save registers are saved.
+    ///
+    /// - The add-imm sequence must work correctly when `from_reg` and/or
+    ///   `into_reg` are the register returned by `get_stacklimit_reg()`.
+    fn gen_add_imm(
+        call_conv: isa::CallConv,
+        into_reg: Writable<Reg>,
+        from_reg: Reg,
+        imm: u32,
+    ) -> SmallInstVec<Self::I>;
+
+    /// Generate a sequence that traps with a `TrapCode::StackOverflow` code if
+    /// the stack pointer is less than the given limit register (assuming the
+    /// stack grows downward).
+    fn gen_stack_lower_bound_trap(limit_reg: Reg) -> SmallInstVec<Self::I>;
+
+    /// Generate an instruction to compute an address of a stack slot (FP- or
+    /// SP-based offset).
+    fn gen_get_stack_addr(mem: StackAMode, into_reg: Writable<Reg>, ty: Type) -> Self::I;
+
+    /// Get a fixed register to use to compute a stack limit. This is needed for
+    /// certain sequences generated after the register allocator has already
+    /// run. This must satisfy two requirements:
+    ///
+    /// - It must be a caller-save register that is not used for arguments,
+    ///   because it will be clobbered in the prologue before the clobbered
+    ///   callee-save registers are saved.
+    ///
+    /// - It must be safe to pass as an argument and/or destination to
+    ///   `gen_add_imm()`. This is relevant when an addition with a large
+    ///   immediate needs its own temporary; it cannot use the same fixed
+    ///   temporary as this one.
+    fn get_stacklimit_reg(call_conv: isa::CallConv) -> Reg;
+
+    /// Generate a store to the given [base+offset] address.
+    fn gen_load_base_offset(into_reg: Writable<Reg>, base: Reg, offset: i32, ty: Type) -> Self::I;
+
+    /// Generate a load from the given [base+offset] address.
+    fn gen_store_base_offset(base: Reg, offset: i32, from_reg: Reg, ty: Type) -> Self::I;
+
+    /// Adjust the stack pointer up or down.
+    fn gen_sp_reg_adjust(amount: i32) -> SmallInstVec<Self::I>;
+
+    /// Generate a meta-instruction that adjusts the nominal SP offset.
+    fn gen_nominal_sp_adj(amount: i32) -> Self::I;
+
+    /// Generates the mandatory part of the prologue, irrespective of whether
+    /// the usual frame-setup sequence for this architecture is required or not,
+    /// e.g. extra unwind instructions.
+    fn gen_prologue_start(
+        _setup_frame: bool,
+        _call_conv: isa::CallConv,
+        _flags: &settings::Flags,
+        _isa_flags: &Self::F,
+    ) -> SmallInstVec<Self::I> {
+        // By default, generates nothing.
+        smallvec![]
+    }
+
+    /// Generate the usual frame-setup sequence for this architecture: e.g.,
+    /// `push rbp / mov rbp, rsp` on x86-64, or `stp fp, lr, [sp, #-16]!` on
+    /// AArch64.
+    fn gen_prologue_frame_setup(flags: &settings::Flags) -> SmallInstVec<Self::I>;
+
+    /// Generate the usual frame-restore sequence for this architecture.
+    fn gen_epilogue_frame_restore(flags: &settings::Flags) -> SmallInstVec<Self::I>;
+
+    /// Generate a probestack call.
+    fn gen_probestack(insts: &mut SmallInstVec<Self::I>, frame_size: u32);
+
+    /// Generate a inline stack probe.
+    fn gen_inline_probestack(
+        insts: &mut SmallInstVec<Self::I>,
+        call_conv: isa::CallConv,
+        frame_size: u32,
+        guard_size: u32,
+    );
+
+    /// Get all clobbered registers that are callee-saved according to the ABI; the result
+    /// contains the registers in a sorted order.
+    fn get_clobbered_callee_saves(
+        call_conv: isa::CallConv,
+        flags: &settings::Flags,
+        sig: &Signature,
+        regs: &[Writable<RealReg>],
+    ) -> Vec<Writable<RealReg>>;
+
+    /// Determine whether it is necessary to generate the usual frame-setup
+    /// sequence (refer to gen_prologue_frame_setup()).
+    fn is_frame_setup_needed(
+        is_leaf: bool,
+        stack_args_size: u32,
+        num_clobbered_callee_saves: usize,
+        fixed_frame_storage_size: u32,
+    ) -> bool;
+
+    /// Generate a clobber-save sequence. The implementation here should return
+    /// a sequence of instructions that "push" or otherwise save to the stack all
+    /// registers written/modified by the function body that are callee-saved.
+    /// The sequence of instructions should adjust the stack pointer downward,
+    /// and should align as necessary according to ABI requirements.
+    ///
+    /// Returns stack bytes used as well as instructions. Does not adjust
+    /// nominal SP offset; caller will do that.
+    fn gen_clobber_save(
+        call_conv: isa::CallConv,
+        setup_frame: bool,
+        flags: &settings::Flags,
+        clobbered_callee_saves: &[Writable<RealReg>],
+        fixed_frame_storage_size: u32,
+        outgoing_args_size: u32,
+    ) -> (u64, SmallVec<[Self::I; 16]>);
+
+    /// Generate a clobber-restore sequence. This sequence should perform the
+    /// opposite of the clobber-save sequence generated above, assuming that SP
+    /// going into the sequence is at the same point that it was left when the
+    /// clobber-save sequence finished.
+    fn gen_clobber_restore(
+        call_conv: isa::CallConv,
+        sig: &Signature,
+        flags: &settings::Flags,
+        clobbers: &[Writable<RealReg>],
+        fixed_frame_storage_size: u32,
+        outgoing_args_size: u32,
+    ) -> SmallVec<[Self::I; 16]>;
+
+    /// Generate a call instruction/sequence. This method is provided one
+    /// temporary register to use to synthesize the called address, if needed.
+    fn gen_call(
+        dest: &CallDest,
+        uses: CallArgList,
+        defs: CallRetList,
+        clobbers: PRegSet,
+        opcode: ir::Opcode,
+        tmp: Writable<Reg>,
+        callee_conv: isa::CallConv,
+        caller_conv: isa::CallConv,
+        callee_pop_size: u32,
+    ) -> SmallVec<[Self::I; 2]>;
+
+    /// Generate a memcpy invocation. Used to set up struct
+    /// args. Takes `src`, `dst` as read-only inputs and passes a temporary
+    /// allocator.
+    fn gen_memcpy<F: FnMut(Type) -> Writable<Reg>>(
+        call_conv: isa::CallConv,
+        dst: Reg,
+        src: Reg,
+        size: usize,
+        alloc_tmp: F,
+    ) -> SmallVec<[Self::I; 8]>;
+
+    /// Get the number of spillslots required for the given register-class.
+    fn get_number_of_spillslots_for_value(
+        rc: RegClass,
+        target_vector_bytes: u32,
+        isa_flags: &Self::F,
+    ) -> u32;
+
+    /// Get the current virtual-SP offset from an instruction-emission state.
+    fn get_virtual_sp_offset_from_state(s: &<Self::I as MachInstEmit>::State) -> i64;
+
+    /// Get the "nominal SP to FP" offset from an instruction-emission state.
+    fn get_nominal_sp_to_fp(s: &<Self::I as MachInstEmit>::State) -> i64;
+
+    /// Get all caller-save registers, that is, registers that we expect
+    /// not to be saved across a call to a callee with the given ABI.
+    fn get_regs_clobbered_by_call(call_conv_of_callee: isa::CallConv) -> PRegSet;
+
+    /// Get the needed extension mode, given the mode attached to the argument
+    /// in the signature and the calling convention. The input (the attribute in
+    /// the signature) specifies what extension type should be done *if* the ABI
+    /// requires extension to the full register; this method's return value
+    /// indicates whether the extension actually *will* be done.
+    fn get_ext_mode(
+        call_conv: isa::CallConv,
+        specified: ir::ArgumentExtension,
+    ) -> ir::ArgumentExtension;
+}
+
+/// The id of an ABI signature within the `SigSet`.
+#[derive(Copy, Clone, PartialEq, Eq, Hash, PartialOrd, Ord)]
+pub struct Sig(u32);
+cranelift_entity::entity_impl!(Sig);
+
+impl Sig {
+    fn prev(self) -> Option<Sig> {
+        self.0.checked_sub(1).map(Sig)
+    }
+}
+
+/// ABI information shared between body (callee) and caller.
+#[derive(Clone, Debug)]
+pub struct SigData {
+    /// Currently both return values and arguments are stored in a continuous space vector
+    /// in `SigSet::abi_args`.
+    ///
+    /// ```plain
+    ///                  +----------------------------------------------+
+    ///                  | return values                                |
+    ///                  | ...                                          |
+    ///   rets_end   --> +----------------------------------------------+
+    ///                  | arguments                                    |
+    ///                  | ...                                          |
+    ///   args_end   --> +----------------------------------------------+
+    ///
+    /// ```
+    ///
+    /// Note we only store two offsets as rets_end == args_start, and rets_start == prev.args_end.
+    ///
+    /// Argument location ending offset (regs or stack slots). Stack offsets are relative to
+    /// SP on entry to function.
+    ///
+    /// This is a index into the `SigSet::abi_args`.
+    args_end: u32,
+
+    /// Return-value location ending offset. Stack offsets are relative to the return-area
+    /// pointer.
+    ///
+    /// This is a index into the `SigSet::abi_args`.
+    rets_end: u32,
+
+    /// Space on stack used to store arguments. We're storing the size in u32 to
+    /// reduce the size of the struct.
+    sized_stack_arg_space: u32,
+
+    /// Space on stack used to store return values. We're storing the size in u32 to
+    /// reduce the size of the struct.
+    sized_stack_ret_space: u32,
+
+    /// Index in `args` of the stack-return-value-area argument.
+    stack_ret_arg: Option<u16>,
+
+    /// Calling convention used.
+    call_conv: isa::CallConv,
+}
+
+impl SigData {
+    /// Get total stack space required for arguments.
+    pub fn sized_stack_arg_space(&self) -> i64 {
+        self.sized_stack_arg_space.into()
+    }
+
+    /// Get total stack space required for return values.
+    pub fn sized_stack_ret_space(&self) -> i64 {
+        self.sized_stack_ret_space.into()
+    }
+
+    /// Get calling convention used.
+    pub fn call_conv(&self) -> isa::CallConv {
+        self.call_conv
+    }
+
+    /// The index of the stack-return-value-area argument, if any.
+    pub fn stack_ret_arg(&self) -> Option<u16> {
+        self.stack_ret_arg
+    }
+}
+
+/// A (mostly) deduplicated set of ABI signatures.
+///
+/// We say "mostly" because we do not dedupe between signatures interned via
+/// `ir::SigRef` (direct and indirect calls; the vast majority of signatures in
+/// this set) vs via `ir::Signature` (the callee itself and libcalls). Doing
+/// this final bit of deduplication would require filling out the
+/// `ir_signature_to_abi_sig`, which is a bunch of allocations (not just the
+/// hash map itself but params and returns vecs in each signature) that we want
+/// to avoid.
+///
+/// In general, prefer using the `ir::SigRef`-taking methods to the
+/// `ir::Signature`-taking methods when you can get away with it, as they don't
+/// require cloning non-copy types that will trigger heap allocations.
+///
+/// This type can be indexed by `Sig` to access its associated `SigData`.
+pub struct SigSet {
+    /// Interned `ir::Signature`s that we already have an ABI signature for.
+    ir_signature_to_abi_sig: FxHashMap<ir::Signature, Sig>,
+
+    /// Interned `ir::SigRef`s that we already have an ABI signature for.
+    ir_sig_ref_to_abi_sig: SecondaryMap<ir::SigRef, Option<Sig>>,
+
+    /// A single, shared allocation for all `ABIArg`s used by all
+    /// `SigData`s. Each `SigData` references its args/rets via indices into
+    /// this allocation.
+    abi_args: Vec<ABIArg>,
+
+    /// The actual ABI signatures, keyed by `Sig`.
+    sigs: PrimaryMap<Sig, SigData>,
+}
+
+impl SigSet {
+    /// Construct a new `SigSet`, interning all of the signatures used by the
+    /// given function.
+    pub fn new<M>(func: &ir::Function, flags: &settings::Flags) -> CodegenResult<Self>
+    where
+        M: ABIMachineSpec,
+    {
+        let arg_estimate = func.dfg.signatures.len() * 6;
+
+        let mut sigs = SigSet {
+            ir_signature_to_abi_sig: FxHashMap::default(),
+            ir_sig_ref_to_abi_sig: SecondaryMap::with_capacity(func.dfg.signatures.len()),
+            abi_args: Vec::with_capacity(arg_estimate),
+            sigs: PrimaryMap::with_capacity(1 + func.dfg.signatures.len()),
+        };
+
+        sigs.make_abi_sig_from_ir_signature::<M>(func.signature.clone(), flags)?;
+        for sig_ref in func.dfg.signatures.keys() {
+            sigs.make_abi_sig_from_ir_sig_ref::<M>(sig_ref, &func.dfg, flags)?;
+        }
+
+        Ok(sigs)
+    }
+
+    /// Have we already interned an ABI signature for the given `ir::Signature`?
+    pub fn have_abi_sig_for_signature(&self, signature: &ir::Signature) -> bool {
+        self.ir_signature_to_abi_sig.contains_key(signature)
+    }
+
+    /// Construct and intern an ABI signature for the given `ir::Signature`.
+    pub fn make_abi_sig_from_ir_signature<M>(
+        &mut self,
+        signature: ir::Signature,
+        flags: &settings::Flags,
+    ) -> CodegenResult<Sig>
+    where
+        M: ABIMachineSpec,
+    {
+        // Because the `HashMap` entry API requires taking ownership of the
+        // lookup key -- and we want to avoid unnecessary clones of
+        // `ir::Signature`s, even at the cost of duplicate lookups -- we can't
+        // have a single, get-or-create-style method for interning
+        // `ir::Signature`s into ABI signatures. So at least (debug) assert that
+        // we aren't creating duplicate ABI signatures for the same
+        // `ir::Signature`.
+        debug_assert!(!self.have_abi_sig_for_signature(&signature));
+
+        let sig_data = self.from_func_sig::<M>(&signature, flags)?;
+        let sig = self.sigs.push(sig_data);
+        self.ir_signature_to_abi_sig.insert(signature, sig);
+        Ok(sig)
+    }
+
+    fn make_abi_sig_from_ir_sig_ref<M>(
+        &mut self,
+        sig_ref: ir::SigRef,
+        dfg: &ir::DataFlowGraph,
+        flags: &settings::Flags,
+    ) -> CodegenResult<Sig>
+    where
+        M: ABIMachineSpec,
+    {
+        if let Some(sig) = self.ir_sig_ref_to_abi_sig[sig_ref] {
+            return Ok(sig);
+        }
+        let signature = &dfg.signatures[sig_ref];
+        let sig_data = self.from_func_sig::<M>(signature, flags)?;
+        let sig = self.sigs.push(sig_data);
+        self.ir_sig_ref_to_abi_sig[sig_ref] = Some(sig);
+        Ok(sig)
+    }
+
+    /// Get the already-interned ABI signature id for the given `ir::SigRef`.
+    pub fn abi_sig_for_sig_ref(&self, sig_ref: ir::SigRef) -> Sig {
+        self.ir_sig_ref_to_abi_sig
+            .get(sig_ref)
+            // Should have a secondary map entry...
+            .expect("must call `make_abi_sig_from_ir_sig_ref` before `get_abi_sig_for_sig_ref`")
+            // ...and that entry should be initialized.
+            .expect("must call `make_abi_sig_from_ir_sig_ref` before `get_abi_sig_for_sig_ref`")
+    }
+
+    /// Get the already-interned ABI signature id for the given `ir::Signature`.
+    pub fn abi_sig_for_signature(&self, signature: &ir::Signature) -> Sig {
+        self.ir_signature_to_abi_sig
+            .get(signature)
+            .copied()
+            .expect("must call `make_abi_sig_from_ir_signature` before `get_abi_sig_for_signature`")
+    }
+
+    pub fn from_func_sig<M: ABIMachineSpec>(
+        &mut self,
+        sig: &ir::Signature,
+        flags: &settings::Flags,
+    ) -> CodegenResult<SigData> {
+        let sret = missing_struct_return(sig);
+        let returns = sret.as_ref().into_iter().chain(&sig.returns);
+
+        // Compute args and retvals from signature. Handle retvals first,
+        // because we may need to add a return-area arg to the args.
+
+        // NOTE: We rely on the order of the args (rets -> args) inserted to compute the offsets in
+        // `SigSet::args()` and `SigSet::rets()`. Therefore, we cannot change the two
+        // compute_arg_locs order.
+        let (sized_stack_ret_space, _) = M::compute_arg_locs(
+            sig.call_conv,
+            flags,
+            returns,
+            ArgsOrRets::Rets,
+            /* extra ret-area ptr = */ false,
+            ArgsAccumulator::new(&mut self.abi_args),
+        )?;
+        let rets_end = u32::try_from(self.abi_args.len()).unwrap();
+
+        let need_stack_return_area = sized_stack_ret_space > 0;
+        let (sized_stack_arg_space, stack_ret_arg) = M::compute_arg_locs(
+            sig.call_conv,
+            flags,
+            &sig.params,
+            ArgsOrRets::Args,
+            need_stack_return_area,
+            ArgsAccumulator::new(&mut self.abi_args),
+        )?;
+        let args_end = u32::try_from(self.abi_args.len()).unwrap();
+
+        trace!(
+            "ABISig: sig {:?} => args end = {} rets end = {}
+             arg stack = {} ret stack = {} stack_ret_arg = {:?}",
+            sig,
+            args_end,
+            rets_end,
+            sized_stack_arg_space,
+            sized_stack_ret_space,
+            need_stack_return_area,
+        );
+
+        let stack_ret_arg = stack_ret_arg.map(|s| u16::try_from(s).unwrap());
+        Ok(SigData {
+            args_end,
+            rets_end,
+            sized_stack_arg_space,
+            sized_stack_ret_space,
+            stack_ret_arg,
+            call_conv: sig.call_conv,
+        })
+    }
+
+    /// Get this signature's ABI arguments.
+    pub fn args(&self, sig: Sig) -> &[ABIArg] {
+        let sig_data = &self.sigs[sig];
+        // Please see comments in `SigSet::from_func_sig` of how we store the offsets.
+        let start = usize::try_from(sig_data.rets_end).unwrap();
+        let end = usize::try_from(sig_data.args_end).unwrap();
+        &self.abi_args[start..end]
+    }
+
+    /// Get information specifying how to pass the implicit pointer
+    /// to the return-value area on the stack, if required.
+    pub fn get_ret_arg(&self, sig: Sig) -> Option<ABIArg> {
+        let sig_data = &self.sigs[sig];
+        if let Some(i) = sig_data.stack_ret_arg {
+            Some(self.args(sig)[usize::from(i)].clone())
+        } else {
+            None
+        }
+    }
+
+    /// Get information specifying how to pass one argument.
+    pub fn get_arg(&self, sig: Sig, idx: usize) -> ABIArg {
+        self.args(sig)[idx].clone()
+    }
+
+    /// Get this signature's ABI returns.
+    pub fn rets(&self, sig: Sig) -> &[ABIArg] {
+        let sig_data = &self.sigs[sig];
+        // Please see comments in `SigSet::from_func_sig` of how we store the offsets.
+        let start = usize::try_from(sig.prev().map_or(0, |prev| self.sigs[prev].args_end)).unwrap();
+        let end = usize::try_from(sig_data.rets_end).unwrap();
+        &self.abi_args[start..end]
+    }
+
+    /// Get information specifying how to pass one return value.
+    pub fn get_ret(&self, sig: Sig, idx: usize) -> ABIArg {
+        self.rets(sig)[idx].clone()
+    }
+
+    /// Return all clobbers for the callsite.
+    pub fn call_clobbers<M: ABIMachineSpec>(&self, sig: Sig) -> PRegSet {
+        let sig_data = &self.sigs[sig];
+        // Get clobbers: all caller-saves. These may include return value
+        // regs, which we will remove from the clobber set below.
+        let mut clobbers = M::get_regs_clobbered_by_call(sig_data.call_conv);
+
+        // Remove retval regs from clobbers. Skip StructRets: these
+        // are not, semantically, returns at the CLIF level, so we
+        // treat such a value as a clobber instead.
+        for ret in self.rets(sig) {
+            if let &ABIArg::Slots {
+                ref slots, purpose, ..
+            } = ret
+            {
+                if purpose == ir::ArgumentPurpose::StructReturn {
+                    continue;
+                }
+                for slot in slots {
+                    match slot {
+                        &ABIArgSlot::Reg { reg, .. } => {
+                            crate::trace!("call_clobbers: retval reg {:?}", reg);
+                            clobbers.remove(PReg::from(reg));
+                        }
+                        _ => {}
+                    }
+                }
+            }
+        }
+
+        clobbers
+    }
+
+    /// Get the number of arguments expected.
+    pub fn num_args(&self, sig: Sig) -> usize {
+        let len = self.args(sig).len();
+        if self.sigs[sig].stack_ret_arg.is_some() {
+            len - 1
+        } else {
+            len
+        }
+    }
+
+    /// Get the number of return values expected.
+    pub fn num_rets(&self, sig: Sig) -> usize {
+        self.rets(sig).len()
+    }
+}
+
+// NB: we do _not_ implement `IndexMut` because these signatures are
+// deduplicated and shared!
+impl std::ops::Index<Sig> for SigSet {
+    type Output = SigData;
+
+    fn index(&self, sig: Sig) -> &Self::Output {
+        &self.sigs[sig]
+    }
+}
+
+/// ABI object for a function body.
+pub struct Callee<M: ABIMachineSpec> {
+    /// CLIF-level signature, possibly normalized.
+    ir_sig: ir::Signature,
+    /// Signature: arg and retval regs.
+    sig: Sig,
+    /// Defined dynamic types.
+    dynamic_type_sizes: HashMap<Type, u32>,
+    /// Offsets to each dynamic stackslot.
+    dynamic_stackslots: PrimaryMap<DynamicStackSlot, u32>,
+    /// Offsets to each sized stackslot.
+    sized_stackslots: PrimaryMap<StackSlot, u32>,
+    /// Total stack size of all stackslots
+    stackslots_size: u32,
+    /// Stack size to be reserved for outgoing arguments.
+    outgoing_args_size: u32,
+    /// Register-argument defs, to be provided to the `args`
+    /// pseudo-inst, and pregs to constrain them to.
+    reg_args: Vec<ArgPair>,
+    /// Clobbered registers, from regalloc.
+    clobbered: Vec<Writable<RealReg>>,
+    /// Total number of spillslots, including for 'dynamic' types, from regalloc.
+    spillslots: Option<usize>,
+    /// Storage allocated for the fixed part of the stack frame.  This is
+    /// usually the same as the total frame size below.
+    fixed_frame_storage_size: u32,
+    /// "Total frame size", as defined by "distance between FP and nominal SP".
+    /// Some items are pushed below nominal SP, so the function may actually use
+    /// more stack than this would otherwise imply. It is simply the initial
+    /// frame/allocation size needed for stackslots and spillslots.
+    total_frame_size: Option<u32>,
+    /// The register holding the return-area pointer, if needed.
+    ret_area_ptr: Option<Writable<Reg>>,
+    /// Temp registers required for argument setup, if needed.
+    arg_temp_reg: Vec<Option<Writable<Reg>>>,
+    /// Calling convention this function expects.
+    call_conv: isa::CallConv,
+    /// The settings controlling this function's compilation.
+    flags: settings::Flags,
+    /// The ISA-specific flag values controlling this function's compilation.
+    isa_flags: M::F,
+    /// Whether or not this function is a "leaf", meaning it calls no other
+    /// functions
+    is_leaf: bool,
+    /// If this function has a stack limit specified, then `Reg` is where the
+    /// stack limit will be located after the instructions specified have been
+    /// executed.
+    ///
+    /// Note that this is intended for insertion into the prologue, if
+    /// present. Also note that because the instructions here execute in the
+    /// prologue this happens after legalization/register allocation/etc so we
+    /// need to be extremely careful with each instruction. The instructions are
+    /// manually register-allocated and carefully only use caller-saved
+    /// registers and keep nothing live after this sequence of instructions.
+    stack_limit: Option<(Reg, SmallInstVec<M::I>)>,
+    /// Are we to invoke the probestack function in the prologue? If so,
+    /// what is the minimum size at which we must invoke it?
+    probestack_min_frame: Option<u32>,
+    /// Whether it is necessary to generate the usual frame-setup sequence.
+    setup_frame: bool,
+
+    _mach: PhantomData<M>,
+}
+
+fn get_special_purpose_param_register(
+    f: &ir::Function,
+    sigs: &SigSet,
+    sig: Sig,
+    purpose: ir::ArgumentPurpose,
+) -> Option<Reg> {
+    let idx = f.signature.special_param_index(purpose)?;
+    match &sigs.args(sig)[idx] {
+        &ABIArg::Slots { ref slots, .. } => match &slots[0] {
+            &ABIArgSlot::Reg { reg, .. } => Some(reg.into()),
+            _ => None,
+        },
+        _ => None,
+    }
+}
+
+fn checked_round_up(val: u32, mask: u32) -> Option<u32> {
+    Some(val.checked_add(mask)? & !mask)
+}
+
+impl<M: ABIMachineSpec> Callee<M> {
+    /// Create a new body ABI instance.
+    pub fn new<'a>(
+        f: &ir::Function,
+        isa: &dyn TargetIsa,
+        isa_flags: &M::F,
+        sigs: &SigSet,
+    ) -> CodegenResult<Self> {
+        trace!("ABI: func signature {:?}", f.signature);
+
+        let flags = isa.flags().clone();
+        let sig = sigs.abi_sig_for_signature(&f.signature);
+
+        let call_conv = f.signature.call_conv;
+        // Only these calling conventions are supported.
+        debug_assert!(
+            call_conv == isa::CallConv::SystemV
+                || call_conv == isa::CallConv::Tail
+                || call_conv == isa::CallConv::Fast
+                || call_conv == isa::CallConv::Cold
+                || call_conv.extends_windows_fastcall()
+                || call_conv == isa::CallConv::WasmtimeSystemV
+                || call_conv == isa::CallConv::AppleAarch64,
+            "Unsupported calling convention: {:?}",
+            call_conv
+        );
+
+        // Compute sized stackslot locations and total stackslot size.
+        let mut sized_stack_offset: u32 = 0;
+        let mut sized_stackslots = PrimaryMap::new();
+        for (stackslot, data) in f.sized_stack_slots.iter() {
+            let off = sized_stack_offset;
+            sized_stack_offset = sized_stack_offset
+                .checked_add(data.size)
+                .ok_or(CodegenError::ImplLimitExceeded)?;
+            let mask = M::word_bytes() - 1;
+            sized_stack_offset = checked_round_up(sized_stack_offset, mask)
+                .ok_or(CodegenError::ImplLimitExceeded)?;
+            debug_assert_eq!(stackslot.as_u32() as usize, sized_stackslots.len());
+            sized_stackslots.push(off);
+        }
+
+        // Compute dynamic stackslot locations and total stackslot size.
+        let mut dynamic_stackslots = PrimaryMap::new();
+        let mut dynamic_stack_offset: u32 = sized_stack_offset;
+        for (stackslot, data) in f.dynamic_stack_slots.iter() {
+            debug_assert_eq!(stackslot.as_u32() as usize, dynamic_stackslots.len());
+            let off = dynamic_stack_offset;
+            let ty = f.get_concrete_dynamic_ty(data.dyn_ty).ok_or_else(|| {
+                CodegenError::Unsupported(format!("invalid dynamic vector type: {}", data.dyn_ty))
+            })?;
+            dynamic_stack_offset = dynamic_stack_offset
+                .checked_add(isa.dynamic_vector_bytes(ty))
+                .ok_or(CodegenError::ImplLimitExceeded)?;
+            let mask = M::word_bytes() - 1;
+            dynamic_stack_offset = checked_round_up(dynamic_stack_offset, mask)
+                .ok_or(CodegenError::ImplLimitExceeded)?;
+            dynamic_stackslots.push(off);
+        }
+        let stackslots_size = dynamic_stack_offset;
+
+        let mut dynamic_type_sizes = HashMap::with_capacity(f.dfg.dynamic_types.len());
+        for (dyn_ty, _data) in f.dfg.dynamic_types.iter() {
+            let ty = f
+                .get_concrete_dynamic_ty(dyn_ty)
+                .unwrap_or_else(|| panic!("invalid dynamic vector type: {}", dyn_ty));
+            let size = isa.dynamic_vector_bytes(ty);
+            dynamic_type_sizes.insert(ty, size);
+        }
+
+        // Figure out what instructions, if any, will be needed to check the
+        // stack limit. This can either be specified as a special-purpose
+        // argument or as a global value which often calculates the stack limit
+        // from the arguments.
+        let stack_limit =
+            get_special_purpose_param_register(f, sigs, sig, ir::ArgumentPurpose::StackLimit)
+                .map(|reg| (reg, smallvec![]))
+                .or_else(|| {
+                    f.stack_limit
+                        .map(|gv| gen_stack_limit::<M>(f, sigs, sig, gv))
+                });
+
+        // Determine whether a probestack call is required for large enough
+        // frames (and the minimum frame size if so).
+        let probestack_min_frame = if flags.enable_probestack() {
+            assert!(
+                !flags.probestack_func_adjusts_sp(),
+                "SP-adjusting probestack not supported in new backends"
+            );
+            Some(1 << flags.probestack_size_log2())
+        } else {
+            None
+        };
+
+        Ok(Self {
+            ir_sig: ensure_struct_return_ptr_is_returned(&f.signature),
+            sig,
+            dynamic_stackslots,
+            dynamic_type_sizes,
+            sized_stackslots,
+            stackslots_size,
+            outgoing_args_size: 0,
+            reg_args: vec![],
+            clobbered: vec![],
+            spillslots: None,
+            fixed_frame_storage_size: 0,
+            total_frame_size: None,
+            ret_area_ptr: None,
+            arg_temp_reg: vec![],
+            call_conv,
+            flags,
+            isa_flags: isa_flags.clone(),
+            is_leaf: f.is_leaf(),
+            stack_limit,
+            probestack_min_frame,
+            setup_frame: true,
+            _mach: PhantomData,
+        })
+    }
+
+    /// Inserts instructions necessary for checking the stack limit into the
+    /// prologue.
+    ///
+    /// This function will generate instructions necessary for perform a stack
+    /// check at the header of a function. The stack check is intended to trap
+    /// if the stack pointer goes below a particular threshold, preventing stack
+    /// overflow in wasm or other code. The `stack_limit` argument here is the
+    /// register which holds the threshold below which we're supposed to trap.
+    /// This function is known to allocate `stack_size` bytes and we'll push
+    /// instructions onto `insts`.
+    ///
+    /// Note that the instructions generated here are special because this is
+    /// happening so late in the pipeline (e.g. after register allocation). This
+    /// means that we need to do manual register allocation here and also be
+    /// careful to not clobber any callee-saved or argument registers. For now
+    /// this routine makes do with the `spilltmp_reg` as one temporary
+    /// register, and a second register of `tmp2` which is caller-saved. This
+    /// should be fine for us since no spills should happen in this sequence of
+    /// instructions, so our register won't get accidentally clobbered.
+    ///
+    /// No values can be live after the prologue, but in this case that's ok
+    /// because we just need to perform a stack check before progressing with
+    /// the rest of the function.
+    fn insert_stack_check(
+        &self,
+        stack_limit: Reg,
+        stack_size: u32,
+        insts: &mut SmallInstVec<M::I>,
+    ) {
+        // With no explicit stack allocated we can just emit the simple check of
+        // the stack registers against the stack limit register, and trap if
+        // it's out of bounds.
+        if stack_size == 0 {
+            insts.extend(M::gen_stack_lower_bound_trap(stack_limit));
+            return;
+        }
+
+        // Note that the 32k stack size here is pretty special. See the
+        // documentation in x86/abi.rs for why this is here. The general idea is
+        // that we're protecting against overflow in the addition that happens
+        // below.
+        if stack_size >= 32 * 1024 {
+            insts.extend(M::gen_stack_lower_bound_trap(stack_limit));
+        }
+
+        // Add the `stack_size` to `stack_limit`, placing the result in
+        // `scratch`.
+        //
+        // Note though that `stack_limit`'s register may be the same as
+        // `scratch`. If our stack size doesn't fit into an immediate this
+        // means we need a second scratch register for loading the stack size
+        // into a register.
+        let scratch = Writable::from_reg(M::get_stacklimit_reg(self.call_conv));
+        insts.extend(M::gen_add_imm(self.call_conv, scratch, stack_limit, stack_size).into_iter());
+        insts.extend(M::gen_stack_lower_bound_trap(scratch.to_reg()));
+    }
+
+    /// Get the register holding the return-area pointer, if any.
+    pub(crate) fn ret_area_ptr(&self) -> Option<Writable<Reg>> {
+        self.ret_area_ptr
+    }
+}
+
+/// Generates the instructions necessary for the `gv` to be materialized into a
+/// register.
+///
+/// This function will return a register that will contain the result of
+/// evaluating `gv`. It will also return any instructions necessary to calculate
+/// the value of the register.
+///
+/// Note that global values are typically lowered to instructions via the
+/// standard legalization pass. Unfortunately though prologue generation happens
+/// so late in the pipeline that we can't use these legalization passes to
+/// generate the instructions for `gv`. As a result we duplicate some lowering
+/// of `gv` here and support only some global values. This is similar to what
+/// the x86 backend does for now, and hopefully this can be somewhat cleaned up
+/// in the future too!
+///
+/// Also note that this function will make use of `writable_spilltmp_reg()` as a
+/// temporary register to store values in if necessary. Currently after we write
+/// to this register there's guaranteed to be no spilled values between where
+/// it's used, because we're not participating in register allocation anyway!
+fn gen_stack_limit<M: ABIMachineSpec>(
+    f: &ir::Function,
+    sigs: &SigSet,
+    sig: Sig,
+    gv: ir::GlobalValue,
+) -> (Reg, SmallInstVec<M::I>) {
+    let mut insts = smallvec![];
+    let reg = generate_gv::<M>(f, sigs, sig, gv, &mut insts);
+    return (reg, insts);
+}
+
+fn generate_gv<M: ABIMachineSpec>(
+    f: &ir::Function,
+    sigs: &SigSet,
+    sig: Sig,
+    gv: ir::GlobalValue,
+    insts: &mut SmallInstVec<M::I>,
+) -> Reg {
+    match f.global_values[gv] {
+        // Return the direct register the vmcontext is in
+        ir::GlobalValueData::VMContext => {
+            get_special_purpose_param_register(f, sigs, sig, ir::ArgumentPurpose::VMContext)
+                .expect("no vmcontext parameter found")
+        }
+        // Load our base value into a register, then load from that register
+        // in to a temporary register.
+        ir::GlobalValueData::Load {
+            base,
+            offset,
+            global_type: _,
+            readonly: _,
+        } => {
+            let base = generate_gv::<M>(f, sigs, sig, base, insts);
+            let into_reg = Writable::from_reg(M::get_stacklimit_reg(f.stencil.signature.call_conv));
+            insts.push(M::gen_load_base_offset(
+                into_reg,
+                base,
+                offset.into(),
+                M::word_type(),
+            ));
+            return into_reg.to_reg();
+        }
+        ref other => panic!("global value for stack limit not supported: {}", other),
+    }
+}
+
+fn gen_load_stack_multi<M: ABIMachineSpec>(
+    from: StackAMode,
+    dst: ValueRegs<Writable<Reg>>,
+    ty: Type,
+) -> SmallInstVec<M::I> {
+    let mut ret = smallvec![];
+    let (_, tys) = M::I::rc_for_type(ty).unwrap();
+    let mut offset = 0;
+    // N.B.: registers are given in the `ValueRegs` in target endian order.
+    for (&dst, &ty) in dst.regs().iter().zip(tys.iter()) {
+        ret.push(M::gen_load_stack(from.offset(offset), dst, ty));
+        offset += ty.bytes() as i64;
+    }
+    ret
+}
+
+fn gen_store_stack_multi<M: ABIMachineSpec>(
+    from: StackAMode,
+    src: ValueRegs<Reg>,
+    ty: Type,
+) -> SmallInstVec<M::I> {
+    let mut ret = smallvec![];
+    let (_, tys) = M::I::rc_for_type(ty).unwrap();
+    let mut offset = 0;
+    // N.B.: registers are given in the `ValueRegs` in target endian order.
+    for (&src, &ty) in src.regs().iter().zip(tys.iter()) {
+        ret.push(M::gen_store_stack(from.offset(offset), src, ty));
+        offset += ty.bytes() as i64;
+    }
+    ret
+}
+
+/// If the signature needs to be legalized, then return the struct-return
+/// parameter that should be prepended to its returns. Otherwise, return `None`.
+fn missing_struct_return(sig: &ir::Signature) -> Option<ir::AbiParam> {
+    let struct_ret_index = sig.special_param_index(ArgumentPurpose::StructReturn)?;
+    if !sig.uses_special_return(ArgumentPurpose::StructReturn) {
+        return Some(sig.params[struct_ret_index]);
+    }
+
+    None
+}
+
+fn ensure_struct_return_ptr_is_returned(sig: &ir::Signature) -> ir::Signature {
+    let mut sig = sig.clone();
+    if let Some(sret) = missing_struct_return(&sig) {
+        sig.returns.insert(0, sret);
+    }
+    sig
+}
+
+/// ### Pre-Regalloc Functions
+///
+/// These methods of `Callee` may only be called before regalloc.
+impl<M: ABIMachineSpec> Callee<M> {
+    /// Access the (possibly legalized) signature.
+    pub fn signature(&self) -> &ir::Signature {
+        debug_assert!(
+            missing_struct_return(&self.ir_sig).is_none(),
+            "`Callee::ir_sig` is always legalized"
+        );
+        &self.ir_sig
+    }
+
+    /// Does the ABI-body code need temp registers (and if so, of what type)?
+    /// They will be provided to `init()` as the `temps` arg if so.
+    pub fn temps_needed(&self, sigs: &SigSet) -> Vec<Type> {
+        let mut temp_tys = vec![];
+        for arg in sigs.args(self.sig) {
+            match arg {
+                &ABIArg::ImplicitPtrArg { pointer, .. } => match &pointer {
+                    &ABIArgSlot::Reg { .. } => {}
+                    &ABIArgSlot::Stack { ty, .. } => {
+                        temp_tys.push(ty);
+                    }
+                },
+                _ => {}
+            }
+        }
+        if sigs[self.sig].stack_ret_arg.is_some() {
+            temp_tys.push(M::word_type());
+        }
+        temp_tys
+    }
+
+    /// Initialize. This is called after the Callee is constructed because it
+    /// may be provided with a vector of temp vregs, which can only be allocated
+    /// once the lowering context exists.
+    pub fn init(&mut self, sigs: &SigSet, temps: Vec<Writable<Reg>>) {
+        let mut temps_iter = temps.into_iter();
+        for arg in sigs.args(self.sig) {
+            let temp = match arg {
+                &ABIArg::ImplicitPtrArg { pointer, .. } => match &pointer {
+                    &ABIArgSlot::Reg { .. } => None,
+                    &ABIArgSlot::Stack { .. } => Some(temps_iter.next().unwrap()),
+                },
+                _ => None,
+            };
+            self.arg_temp_reg.push(temp);
+        }
+        if sigs[self.sig].stack_ret_arg.is_some() {
+            self.ret_area_ptr = Some(temps_iter.next().unwrap());
+        }
+    }
+
+    /// Accumulate outgoing arguments.
+    ///
+    /// This ensures that at least `size` bytes are allocated in the prologue to
+    /// be available for use in function calls to hold arguments and/or return
+    /// values. If this function is called multiple times, the maximum of all
+    /// `size` values will be available.
+    pub fn accumulate_outgoing_args_size(&mut self, size: u32) {
+        if size > self.outgoing_args_size {
+            self.outgoing_args_size = size;
+        }
+    }
+
+    pub fn is_forward_edge_cfi_enabled(&self) -> bool {
+        self.isa_flags.is_forward_edge_cfi_enabled()
+    }
+
+    /// Get the calling convention implemented by this ABI object.
+    pub fn call_conv(&self, sigs: &SigSet) -> isa::CallConv {
+        sigs[self.sig].call_conv
+    }
+
+    /// The offsets of all sized stack slots (not spill slots) for debuginfo purposes.
+    pub fn sized_stackslot_offsets(&self) -> &PrimaryMap<StackSlot, u32> {
+        &self.sized_stackslots
+    }
+
+    /// The offsets of all dynamic stack slots (not spill slots) for debuginfo purposes.
+    pub fn dynamic_stackslot_offsets(&self) -> &PrimaryMap<DynamicStackSlot, u32> {
+        &self.dynamic_stackslots
+    }
+
+    /// Generate an instruction which copies an argument to a destination
+    /// register.
+    pub fn gen_copy_arg_to_regs(
+        &mut self,
+        sigs: &SigSet,
+        idx: usize,
+        into_regs: ValueRegs<Writable<Reg>>,
+        vregs: &mut VRegAllocator<M::I>,
+    ) -> SmallInstVec<M::I> {
+        let mut insts = smallvec![];
+        let mut copy_arg_slot_to_reg = |slot: &ABIArgSlot, into_reg: &Writable<Reg>| {
+            match slot {
+                &ABIArgSlot::Reg { reg, .. } => {
+                    // Add a preg -> def pair to the eventual `args`
+                    // instruction.  Extension mode doesn't matter
+                    // (we're copying out, not in; we ignore high bits
+                    // by convention).
+                    let arg = ArgPair {
+                        vreg: *into_reg,
+                        preg: reg.into(),
+                    };
+                    self.reg_args.push(arg);
+                }
+                &ABIArgSlot::Stack {
+                    offset,
+                    ty,
+                    extension,
+                    ..
+                } => {
+                    // However, we have to respect the extention mode for stack
+                    // slots, or else we grab the wrong bytes on big-endian.
+                    let ext = M::get_ext_mode(sigs[self.sig].call_conv, extension);
+                    let ty = match (ext, ty_bits(ty) as u32) {
+                        (ArgumentExtension::Uext, n) | (ArgumentExtension::Sext, n)
+                            if n < M::word_bits() =>
+                        {
+                            M::word_type()
+                        }
+                        _ => ty,
+                    };
+                    insts.push(M::gen_load_stack(
+                        StackAMode::FPOffset(
+                            M::fp_to_arg_offset(self.call_conv, &self.flags) + offset,
+                            ty,
+                        ),
+                        *into_reg,
+                        ty,
+                    ));
+                }
+            }
+        };
+
+        match &sigs.args(self.sig)[idx] {
+            &ABIArg::Slots { ref slots, .. } => {
+                assert_eq!(into_regs.len(), slots.len());
+                for (slot, into_reg) in slots.iter().zip(into_regs.regs().iter()) {
+                    copy_arg_slot_to_reg(&slot, &into_reg);
+                }
+            }
+            &ABIArg::StructArg {
+                pointer, offset, ..
+            } => {
+                let into_reg = into_regs.only_reg().unwrap();
+                if let Some(slot) = pointer {
+                    // Buffer address is passed in a register or stack slot.
+                    copy_arg_slot_to_reg(&slot, &into_reg);
+                } else {
+                    // Buffer address is implicitly defined by the ABI.
+                    insts.push(M::gen_get_stack_addr(
+                        StackAMode::FPOffset(
+                            M::fp_to_arg_offset(self.call_conv, &self.flags) + offset,
+                            I8,
+                        ),
+                        into_reg,
+                        I8,
+                    ));
+                }
+            }
+            &ABIArg::ImplicitPtrArg { pointer, ty, .. } => {
+                let into_reg = into_regs.only_reg().unwrap();
+                // We need to dereference the pointer.
+                let base = match &pointer {
+                    &ABIArgSlot::Reg { reg, ty, .. } => {
+                        let tmp = vregs.alloc(ty).unwrap().only_reg().unwrap();
+                        self.reg_args.push(ArgPair {
+                            vreg: Writable::from_reg(tmp),
+                            preg: reg.into(),
+                        });
+                        tmp
+                    }
+                    &ABIArgSlot::Stack { offset, ty, .. } => {
+                        // In this case we need a temp register to hold the address.
+                        // This was allocated in the `init` routine.
+                        let addr_reg = self.arg_temp_reg[idx].unwrap();
+                        insts.push(M::gen_load_stack(
+                            StackAMode::FPOffset(
+                                M::fp_to_arg_offset(self.call_conv, &self.flags) + offset,
+                                ty,
+                            ),
+                            addr_reg,
+                            ty,
+                        ));
+                        addr_reg.to_reg()
+                    }
+                };
+                insts.push(M::gen_load_base_offset(into_reg, base, 0, ty));
+            }
+        }
+        insts
+    }
+
+    /// Is the given argument needed in the body (as opposed to, e.g., serving
+    /// only as a special ABI-specific placeholder)? This controls whether
+    /// lowering will copy it to a virtual reg use by CLIF instructions.
+    pub fn arg_is_needed_in_body(&self, _idx: usize) -> bool {
+        true
+    }
+
+    /// Generate an instruction which copies a source register to a return value slot.
+    pub fn gen_copy_regs_to_retval(
+        &self,
+        sigs: &SigSet,
+        idx: usize,
+        from_regs: ValueRegs<Reg>,
+        vregs: &mut VRegAllocator<M::I>,
+    ) -> (SmallVec<[RetPair; 2]>, SmallInstVec<M::I>) {
+        let mut reg_pairs = smallvec![];
+        let mut ret = smallvec![];
+        let word_bits = M::word_bits() as u8;
+        match &sigs.rets(self.sig)[idx] {
+            &ABIArg::Slots { ref slots, .. } => {
+                assert_eq!(from_regs.len(), slots.len());
+                for (slot, &from_reg) in slots.iter().zip(from_regs.regs().iter()) {
+                    match slot {
+                        &ABIArgSlot::Reg {
+                            reg, ty, extension, ..
+                        } => {
+                            let from_bits = ty_bits(ty) as u8;
+                            let ext = M::get_ext_mode(sigs[self.sig].call_conv, extension);
+                            let vreg = match (ext, from_bits) {
+                                (ir::ArgumentExtension::Uext, n)
+                                | (ir::ArgumentExtension::Sext, n)
+                                    if n < word_bits =>
+                                {
+                                    let signed = ext == ir::ArgumentExtension::Sext;
+                                    let dst = writable_value_regs(vregs.alloc(ty).unwrap())
+                                        .only_reg()
+                                        .unwrap();
+                                    ret.push(M::gen_extend(
+                                        dst, from_reg, signed, from_bits,
+                                        /* to_bits = */ word_bits,
+                                    ));
+                                    dst.to_reg()
+                                }
+                                _ => {
+                                    // No move needed, regalloc2 will emit it using the constraint
+                                    // added by the RetPair.
+                                    from_reg
+                                }
+                            };
+                            reg_pairs.push(RetPair {
+                                vreg,
+                                preg: Reg::from(reg),
+                            });
+                        }
+                        &ABIArgSlot::Stack {
+                            offset,
+                            ty,
+                            extension,
+                            ..
+                        } => {
+                            let mut ty = ty;
+                            let from_bits = ty_bits(ty) as u8;
+                            // A machine ABI implementation should ensure that stack frames
+                            // have "reasonable" size. All current ABIs for machinst
+                            // backends (aarch64 and x64) enforce a 128MB limit.
+                            let off = i32::try_from(offset).expect(
+                                "Argument stack offset greater than 2GB; should hit impl limit first",
+                                );
+                            let ext = M::get_ext_mode(sigs[self.sig].call_conv, extension);
+                            // Trash the from_reg; it should be its last use.
+                            match (ext, from_bits) {
+                                (ir::ArgumentExtension::Uext, n)
+                                | (ir::ArgumentExtension::Sext, n)
+                                    if n < word_bits =>
+                                {
+                                    assert_eq!(M::word_reg_class(), from_reg.class());
+                                    let signed = ext == ir::ArgumentExtension::Sext;
+                                    let dst = writable_value_regs(vregs.alloc(ty).unwrap())
+                                        .only_reg()
+                                        .unwrap();
+                                    ret.push(M::gen_extend(
+                                        dst, from_reg, signed, from_bits,
+                                        /* to_bits = */ word_bits,
+                                    ));
+                                    // Store the extended version.
+                                    ty = M::word_type();
+                                }
+                                _ => {}
+                            };
+                            ret.push(M::gen_store_base_offset(
+                                self.ret_area_ptr.unwrap().to_reg(),
+                                off,
+                                from_reg,
+                                ty,
+                            ));
+                        }
+                    }
+                }
+            }
+            ABIArg::StructArg { .. } => {
+                panic!("StructArg in return position is unsupported");
+            }
+            ABIArg::ImplicitPtrArg { .. } => {
+                panic!("ImplicitPtrArg in return position is unsupported");
+            }
+        }
+        (reg_pairs, ret)
+    }
+
+    /// Generate any setup instruction needed to save values to the
+    /// return-value area. This is usually used when were are multiple return
+    /// values or an otherwise large return value that must be passed on the
+    /// stack; typically the ABI specifies an extra hidden argument that is a
+    /// pointer to that memory.
+    pub fn gen_retval_area_setup(
+        &mut self,
+        sigs: &SigSet,
+        vregs: &mut VRegAllocator<M::I>,
+    ) -> Option<M::I> {
+        if let Some(i) = sigs[self.sig].stack_ret_arg {
+            let insts = self.gen_copy_arg_to_regs(
+                sigs,
+                i.into(),
+                ValueRegs::one(self.ret_area_ptr.unwrap()),
+                vregs,
+            );
+            insts.into_iter().next().map(|inst| {
+                trace!(
+                    "gen_retval_area_setup: inst {:?}; ptr reg is {:?}",
+                    inst,
+                    self.ret_area_ptr.unwrap().to_reg()
+                );
+                inst
+            })
+        } else {
+            trace!("gen_retval_area_setup: not needed");
+            None
+        }
+    }
+
+    /// Generate a return instruction.
+    pub fn gen_ret(&self, sigs: &SigSet, rets: Vec<RetPair>) -> M::I {
+        M::gen_ret(
+            self.setup_frame,
+            &self.isa_flags,
+            rets,
+            self.stack_bytes_to_pop(sigs),
+        )
+    }
+
+    fn stack_bytes_to_pop(&self, sigs: &SigSet) -> u32 {
+        let sig = &sigs[self.sig];
+        if sig.call_conv == isa::CallConv::Tail {
+            sig.sized_stack_arg_space
+        } else {
+            0
+        }
+    }
+
+    /// Produce an instruction that computes a sized stackslot address.
+    pub fn sized_stackslot_addr(
+        &self,
+        slot: StackSlot,
+        offset: u32,
+        into_reg: Writable<Reg>,
+    ) -> M::I {
+        // Offset from beginning of stackslot area, which is at nominal SP (see
+        // [MemArg::NominalSPOffset] for more details on nominal SP tracking).
+        let stack_off = self.sized_stackslots[slot] as i64;
+        let sp_off: i64 = stack_off + (offset as i64);
+        M::gen_get_stack_addr(StackAMode::NominalSPOffset(sp_off, I8), into_reg, I8)
+    }
+
+    /// Produce an instruction that computes a dynamic stackslot address.
+    pub fn dynamic_stackslot_addr(&self, slot: DynamicStackSlot, into_reg: Writable<Reg>) -> M::I {
+        let stack_off = self.dynamic_stackslots[slot] as i64;
+        M::gen_get_stack_addr(
+            StackAMode::NominalSPOffset(stack_off, I64X2XN),
+            into_reg,
+            I64X2XN,
+        )
+    }
+
+    /// Load from a spillslot.
+    pub fn load_spillslot(
+        &self,
+        slot: SpillSlot,
+        ty: Type,
+        into_regs: ValueRegs<Writable<Reg>>,
+    ) -> SmallInstVec<M::I> {
+        // Offset from beginning of spillslot area, which is at nominal SP + stackslots_size.
+        let islot = slot.index() as i64;
+        let spill_off = islot * M::word_bytes() as i64;
+        let sp_off = self.stackslots_size as i64 + spill_off;
+        trace!("load_spillslot: slot {:?} -> sp_off {}", slot, sp_off);
+
+        gen_load_stack_multi::<M>(StackAMode::NominalSPOffset(sp_off, ty), into_regs, ty)
+    }
+
+    /// Store to a spillslot.
+    pub fn store_spillslot(
+        &self,
+        slot: SpillSlot,
+        ty: Type,
+        from_regs: ValueRegs<Reg>,
+    ) -> SmallInstVec<M::I> {
+        // Offset from beginning of spillslot area, which is at nominal SP + stackslots_size.
+        let islot = slot.index() as i64;
+        let spill_off = islot * M::word_bytes() as i64;
+        let sp_off = self.stackslots_size as i64 + spill_off;
+        trace!("store_spillslot: slot {:?} -> sp_off {}", slot, sp_off);
+
+        gen_store_stack_multi::<M>(StackAMode::NominalSPOffset(sp_off, ty), from_regs, ty)
+    }
+
+    /// Get an `args` pseudo-inst, if any, that should appear at the
+    /// very top of the function body prior to regalloc.
+    pub fn take_args(&mut self) -> Option<M::I> {
+        if self.reg_args.len() > 0 {
+            // Very first instruction is an `args` pseudo-inst that
+            // establishes live-ranges for in-register arguments and
+            // constrains them at the start of the function to the
+            // locations defined by the ABI.
+            Some(M::gen_args(
+                &self.isa_flags,
+                std::mem::take(&mut self.reg_args),
+            ))
+        } else {
+            None
+        }
+    }
+}
+
+/// ### Post-Regalloc Functions
+///
+/// These methods of `Callee` may only be called after
+/// regalloc.
+impl<M: ABIMachineSpec> Callee<M> {
+    /// Update with the number of spillslots, post-regalloc.
+    pub fn set_num_spillslots(&mut self, slots: usize) {
+        self.spillslots = Some(slots);
+    }
+
+    /// Update with the clobbered registers, post-regalloc.
+    pub fn set_clobbered(&mut self, clobbered: Vec<Writable<RealReg>>) {
+        self.clobbered = clobbered;
+    }
+
+    /// Generate a stack map, given a list of spillslots and the emission state
+    /// at a given program point (prior to emission of the safepointing
+    /// instruction).
+    pub fn spillslots_to_stack_map(
+        &self,
+        slots: &[SpillSlot],
+        state: &<M::I as MachInstEmit>::State,
+    ) -> StackMap {
+        let virtual_sp_offset = M::get_virtual_sp_offset_from_state(state);
+        let nominal_sp_to_fp = M::get_nominal_sp_to_fp(state);
+        assert!(virtual_sp_offset >= 0);
+        trace!(
+            "spillslots_to_stackmap: slots = {:?}, state = {:?}",
+            slots,
+            state
+        );
+        let map_size = (virtual_sp_offset + nominal_sp_to_fp) as u32;
+        let bytes = M::word_bytes();
+        let map_words = (map_size + bytes - 1) / bytes;
+        let mut bits = std::iter::repeat(false)
+            .take(map_words as usize)
+            .collect::<Vec<bool>>();
+
+        let first_spillslot_word =
+            ((self.stackslots_size + virtual_sp_offset as u32) / bytes) as usize;
+        for &slot in slots {
+            let slot = slot.index();
+            bits[first_spillslot_word + slot] = true;
+        }
+
+        StackMap::from_slice(&bits[..])
+    }
+
+    /// Generate a prologue, post-regalloc.
+    ///
+    /// This should include any stack frame or other setup necessary to use the
+    /// other methods (`load_arg`, `store_retval`, and spillslot accesses.)
+    /// `self` is mutable so that we can store information in it which will be
+    /// useful when creating the epilogue.
+    pub fn gen_prologue(&mut self, sigs: &SigSet) -> SmallInstVec<M::I> {
+        let bytes = M::word_bytes();
+        let total_stacksize = self.stackslots_size + bytes * self.spillslots.unwrap() as u32;
+        let mask = M::stack_align(self.call_conv) - 1;
+        let total_stacksize = (total_stacksize + mask) & !mask; // 16-align the stack.
+        let clobbered_callee_saves = M::get_clobbered_callee_saves(
+            self.call_conv,
+            &self.flags,
+            self.signature(),
+            &self.clobbered,
+        );
+        let mut insts = smallvec![];
+
+        self.fixed_frame_storage_size += total_stacksize;
+        self.setup_frame = self.flags.preserve_frame_pointers()
+            || M::is_frame_setup_needed(
+                self.is_leaf,
+                self.stack_args_size(sigs),
+                clobbered_callee_saves.len(),
+                self.fixed_frame_storage_size,
+            );
+
+        insts.extend(
+            M::gen_prologue_start(
+                self.setup_frame,
+                self.call_conv,
+                &self.flags,
+                &self.isa_flags,
+            )
+            .into_iter(),
+        );
+
+        if self.setup_frame {
+            // set up frame
+            insts.extend(M::gen_prologue_frame_setup(&self.flags).into_iter());
+        }
+
+        // Leaf functions with zero stack don't need a stack check if one's
+        // specified, otherwise always insert the stack check.
+        if total_stacksize > 0 || !self.is_leaf {
+            if let Some((reg, stack_limit_load)) = &self.stack_limit {
+                insts.extend(stack_limit_load.clone());
+                self.insert_stack_check(*reg, total_stacksize, &mut insts);
+            }
+
+            let needs_probestack = self
+                .probestack_min_frame
+                .map_or(false, |min_frame| total_stacksize >= min_frame);
+
+            if needs_probestack {
+                match self.flags.probestack_strategy() {
+                    ProbestackStrategy::Inline => {
+                        let guard_size = 1 << self.flags.probestack_size_log2();
+                        M::gen_inline_probestack(
+                            &mut insts,
+                            self.call_conv,
+                            total_stacksize,
+                            guard_size,
+                        )
+                    }
+                    ProbestackStrategy::Outline => M::gen_probestack(&mut insts, total_stacksize),
+                }
+            }
+        }
+
+        // Save clobbered registers.
+        let (clobber_size, clobber_insts) = M::gen_clobber_save(
+            self.call_conv,
+            self.setup_frame,
+            &self.flags,
+            &clobbered_callee_saves,
+            self.fixed_frame_storage_size,
+            self.outgoing_args_size,
+        );
+        insts.extend(clobber_insts);
+
+        // N.B.: "nominal SP", which we use to refer to stackslots and
+        // spillslots, is defined to be equal to the stack pointer at this point
+        // in the prologue.
+        //
+        // If we push any further data onto the stack in the function
+        // body, we emit a virtual-SP adjustment meta-instruction so
+        // that the nominal SP references behave as if SP were still
+        // at this point. See documentation for
+        // [crate::machinst::abi](this module) for more details
+        // on stackframe layout and nominal SP maintenance.
+
+        self.total_frame_size = Some(total_stacksize + clobber_size as u32);
+        insts
+    }
+
+    /// Generate an epilogue, post-regalloc.
+    ///
+    /// Note that this must generate the actual return instruction (rather than
+    /// emitting this in the lowering logic), because the epilogue code comes
+    /// before the return and the two are likely closely related.
+    pub fn gen_epilogue(&self, sigs: &SigSet) -> SmallInstVec<M::I> {
+        let mut insts = smallvec![];
+
+        // Restore clobbered registers.
+        insts.extend(M::gen_clobber_restore(
+            self.call_conv,
+            self.signature(),
+            &self.flags,
+            &self.clobbered,
+            self.fixed_frame_storage_size,
+            self.outgoing_args_size,
+        ));
+
+        // N.B.: we do *not* emit a nominal SP adjustment here, because (i) there will be no
+        // references to nominal SP offsets before the return below, and (ii) the instruction
+        // emission tracks running SP offset linearly (in straight-line order), not according to
+        // the CFG, so early returns in the middle of function bodies would cause an incorrect
+        // offset for the rest of the body.
+
+        if self.setup_frame {
+            insts.extend(M::gen_epilogue_frame_restore(&self.flags));
+        }
+
+        // This `ret` doesn't need any return registers attached
+        // because we are post-regalloc and don't need to
+        // represent the implicit uses anymore.
+        insts.push(M::gen_ret(
+            self.setup_frame,
+            &self.isa_flags,
+            vec![],
+            self.stack_bytes_to_pop(sigs),
+        ));
+
+        trace!("Epilogue: {:?}", insts);
+        insts
+    }
+
+    /// Returns the full frame size for the given function, after prologue
+    /// emission has run. This comprises the spill slots and stack-storage slots
+    /// (but not storage for clobbered callee-save registers, arguments pushed
+    /// at callsites within this function, or other ephemeral pushes).
+    pub fn frame_size(&self) -> u32 {
+        self.total_frame_size
+            .expect("frame size not computed before prologue generation")
+    }
+
+    /// Returns the size of arguments expected on the stack.
+    pub fn stack_args_size(&self, sigs: &SigSet) -> u32 {
+        sigs[self.sig].sized_stack_arg_space
+    }
+
+    /// Get the spill-slot size.
+    pub fn get_spillslot_size(&self, rc: RegClass) -> u32 {
+        let max = if self.dynamic_type_sizes.len() == 0 {
+            16
+        } else {
+            *self
+                .dynamic_type_sizes
+                .iter()
+                .max_by(|x, y| x.1.cmp(&y.1))
+                .map(|(_k, v)| v)
+                .unwrap()
+        };
+        M::get_number_of_spillslots_for_value(rc, max, &self.isa_flags)
+    }
+
+    /// Generate a spill.
+    pub fn gen_spill(&self, to_slot: SpillSlot, from_reg: RealReg) -> M::I {
+        let ty = M::I::canonical_type_for_rc(Reg::from(from_reg).class());
+        self.store_spillslot(to_slot, ty, ValueRegs::one(Reg::from(from_reg)))
+            .into_iter()
+            .next()
+            .unwrap()
+    }
+
+    /// Generate a reload (fill).
+    pub fn gen_reload(&self, to_reg: Writable<RealReg>, from_slot: SpillSlot) -> M::I {
+        let ty = M::I::canonical_type_for_rc(to_reg.to_reg().class());
+        self.load_spillslot(
+            from_slot,
+            ty,
+            writable_value_regs(ValueRegs::one(Reg::from(to_reg.to_reg()))),
+        )
+        .into_iter()
+        .next()
+        .unwrap()
+    }
+}
+
+/// An input argument to a call instruction: the vreg that is used,
+/// and the preg it is constrained to (per the ABI).
+#[derive(Clone, Debug)]
+pub struct CallArgPair {
+    /// The virtual register to use for the argument.
+    pub vreg: Reg,
+    /// The real register into which the arg goes.
+    pub preg: Reg,
+}
+
+/// An output return value from a call instruction: the vreg that is
+/// defined, and the preg it is constrained to (per the ABI).
+#[derive(Clone, Debug)]
+pub struct CallRetPair {
+    /// The virtual register to define from this return value.
+    pub vreg: Writable<Reg>,
+    /// The real register from which the return value is read.
+    pub preg: Reg,
+}
+
+pub type CallArgList = SmallVec<[CallArgPair; 8]>;
+pub type CallRetList = SmallVec<[CallRetPair; 8]>;
+
+/// ABI object for a callsite.
+pub struct CallSite<M: ABIMachineSpec> {
+    /// The called function's signature.
+    sig: Sig,
+    /// All register uses for the callsite, i.e., function args, with
+    /// VReg and the physical register it is constrained to.
+    uses: CallArgList,
+    /// All defs for the callsite, i.e., return values.
+    defs: CallRetList,
+    /// Caller-save clobbers.
+    clobbers: PRegSet,
+    /// Call destination.
+    dest: CallDest,
+    /// Actual call opcode; used to distinguish various types of calls.
+    opcode: ir::Opcode,
+    /// Caller's calling convention.
+    caller_conv: isa::CallConv,
+    /// The settings controlling this compilation.
+    flags: settings::Flags,
+
+    _mach: PhantomData<M>,
+}
+
+/// Destination for a call.
+#[derive(Debug, Clone)]
+pub enum CallDest {
+    /// Call to an ExtName (named function symbol).
+    ExtName(ir::ExternalName, RelocDistance),
+    /// Indirect call to a function pointer in a register.
+    Reg(Reg),
+}
+
+impl<M: ABIMachineSpec> CallSite<M> {
+    /// Create a callsite ABI object for a call directly to the specified function.
+    pub fn from_func(
+        sigs: &SigSet,
+        sig_ref: ir::SigRef,
+        extname: &ir::ExternalName,
+        dist: RelocDistance,
+        caller_conv: isa::CallConv,
+        flags: settings::Flags,
+    ) -> CallSite<M> {
+        let sig = sigs.abi_sig_for_sig_ref(sig_ref);
+        let clobbers = sigs.call_clobbers::<M>(sig);
+        CallSite {
+            sig,
+            uses: smallvec![],
+            defs: smallvec![],
+            clobbers,
+            dest: CallDest::ExtName(extname.clone(), dist),
+            opcode: ir::Opcode::Call,
+            caller_conv,
+            flags,
+            _mach: PhantomData,
+        }
+    }
+
+    /// Create a callsite ABI object for a call directly to the specified
+    /// libcall.
+    pub fn from_libcall(
+        sigs: &SigSet,
+        sig: &ir::Signature,
+        extname: &ir::ExternalName,
+        dist: RelocDistance,
+        caller_conv: isa::CallConv,
+        flags: settings::Flags,
+    ) -> CallSite<M> {
+        let sig = sigs.abi_sig_for_signature(sig);
+        let clobbers = sigs.call_clobbers::<M>(sig);
+        CallSite {
+            sig,
+            uses: smallvec![],
+            defs: smallvec![],
+            clobbers,
+            dest: CallDest::ExtName(extname.clone(), dist),
+            opcode: ir::Opcode::Call,
+            caller_conv,
+            flags,
+            _mach: PhantomData,
+        }
+    }
+
+    /// Create a callsite ABI object for a call to a function pointer with the
+    /// given signature.
+    pub fn from_ptr(
+        sigs: &SigSet,
+        sig_ref: ir::SigRef,
+        ptr: Reg,
+        opcode: ir::Opcode,
+        caller_conv: isa::CallConv,
+        flags: settings::Flags,
+    ) -> CallSite<M> {
+        let sig = sigs.abi_sig_for_sig_ref(sig_ref);
+        let clobbers = sigs.call_clobbers::<M>(sig);
+        CallSite {
+            sig,
+            uses: smallvec![],
+            defs: smallvec![],
+            clobbers,
+            dest: CallDest::Reg(ptr),
+            opcode,
+            caller_conv,
+            flags,
+            _mach: PhantomData,
+        }
+    }
+
+    pub(crate) fn sig(&self) -> Sig {
+        self.sig
+    }
+
+    pub(crate) fn dest(&self) -> &CallDest {
+        &self.dest
+    }
+
+    pub(crate) fn take_uses(self) -> CallArgList {
+        self.uses
+    }
+}
+
+fn adjust_stack_and_nominal_sp<M: ABIMachineSpec>(ctx: &mut Lower<M::I>, amount: i32) {
+    if amount == 0 {
+        return;
+    }
+    for inst in M::gen_sp_reg_adjust(amount) {
+        ctx.emit(inst);
+    }
+    ctx.emit(M::gen_nominal_sp_adj(-amount));
+}
+
+impl<M: ABIMachineSpec> CallSite<M> {
+    /// Get the number of arguments expected.
+    pub fn num_args(&self, sigs: &SigSet) -> usize {
+        sigs.num_args(self.sig)
+    }
+
+    /// Allocate space for building a `return_call`'s temporary frame before we
+    /// copy it over the current frame.
+    pub fn emit_allocate_tail_call_frame(&self, ctx: &mut Lower<M::I>) -> u32 {
+        // The necessary stack space is:
+        //
+        //     sizeof(callee_sig.stack_args)
+        //
+        // Note that any stack return space conceptually belongs to our caller
+        // and the function we are tail calling to has the same return type and
+        // will reuse that stack return space.
+        //
+        // The return address is pushed later on, after the stack arguments are
+        // filled in.
+        let frame_size = ctx.sigs()[self.sig].sized_stack_arg_space;
+
+        let adjustment = -i32::try_from(frame_size).unwrap();
+        adjust_stack_and_nominal_sp::<M>(ctx, adjustment);
+
+        frame_size
+    }
+
+    /// Emit code to pre-adjust the stack, prior to argument copies and call.
+    pub fn emit_stack_pre_adjust(&self, ctx: &mut Lower<M::I>) {
+        let sig = &ctx.sigs()[self.sig];
+        let stack_space = sig.sized_stack_arg_space + sig.sized_stack_ret_space;
+        let stack_space = i32::try_from(stack_space).unwrap();
+        adjust_stack_and_nominal_sp::<M>(ctx, -stack_space);
+    }
+
+    /// Emit code to post-adjust the stack, after call return and return-value copies.
+    pub fn emit_stack_post_adjust(&self, ctx: &mut Lower<M::I>) {
+        let sig = &ctx.sigs()[self.sig];
+
+        let stack_space = if sig.call_conv() == isa::CallConv::Tail {
+            // The "tail" calling convention has callees clean up stack
+            // arguments, not callers. Callers still clean up any stack return
+            // space, however.
+            sig.sized_stack_ret_space
+        } else {
+            sig.sized_stack_arg_space + sig.sized_stack_ret_space
+        };
+        let stack_space = i32::try_from(stack_space).unwrap();
+
+        adjust_stack_and_nominal_sp::<M>(ctx, stack_space);
+    }
+
+    /// Emit a copy of a large argument into its associated stack buffer, if
+    /// any.  We must be careful to perform all these copies (as necessary)
+    /// before setting up the argument registers, since we may have to invoke
+    /// memcpy(), which could clobber any registers already set up.  The
+    /// back-end should call this routine for all arguments before calling
+    /// `gen_arg` for all arguments.
+    pub fn emit_copy_regs_to_buffer(
+        &self,
+        ctx: &mut Lower<M::I>,
+        idx: usize,
+        from_regs: ValueRegs<Reg>,
+    ) {
+        match &ctx.sigs().args(self.sig)[idx] {
+            &ABIArg::Slots { .. } | &ABIArg::ImplicitPtrArg { .. } => {}
+            &ABIArg::StructArg { offset, size, .. } => {
+                let src_ptr = from_regs.only_reg().unwrap();
+                let dst_ptr = ctx.alloc_tmp(M::word_type()).only_reg().unwrap();
+                ctx.emit(M::gen_get_stack_addr(
+                    StackAMode::SPOffset(offset, I8),
+                    dst_ptr,
+                    I8,
+                ));
+                // Emit a memcpy from `src_ptr` to `dst_ptr` of `size` bytes.
+                // N.B.: because we process StructArg params *first*, this is
+                // safe w.r.t. clobbers: we have not yet filled in any other
+                // arg regs.
+                let memcpy_call_conv =
+                    isa::CallConv::for_libcall(&self.flags, ctx.sigs()[self.sig].call_conv);
+                for insn in M::gen_memcpy(
+                    memcpy_call_conv,
+                    dst_ptr.to_reg(),
+                    src_ptr,
+                    size as usize,
+                    |ty| ctx.alloc_tmp(ty).only_reg().unwrap(),
+                )
+                .into_iter()
+                {
+                    ctx.emit(insn);
+                }
+            }
+        }
+    }
+
+    /// Add a constraint for an argument value from a source register.
+    /// For large arguments with associated stack buffer, this may
+    /// load the address of the buffer into the argument register, if
+    /// required by the ABI.
+    pub fn gen_arg(
+        &mut self,
+        ctx: &mut Lower<M::I>,
+        idx: usize,
+        from_regs: ValueRegs<Reg>,
+    ) -> SmallInstVec<M::I> {
+        let mut insts = smallvec![];
+        let word_rc = M::word_reg_class();
+        let word_bits = M::word_bits() as usize;
+
+        // How many temps do we need for extends? Allocate them ahead
+        // of time, since we can't do it while we're iterating over
+        // the sig and immutably borrowing `ctx`.
+        let needed_tmps = match &ctx.sigs().args(self.sig)[idx] {
+            &ABIArg::Slots { ref slots, .. } => slots
+                .iter()
+                .map(|slot| match slot {
+                    &ABIArgSlot::Reg { extension, .. }
+                        if extension != ir::ArgumentExtension::None =>
+                    {
+                        1
+                    }
+                    &ABIArgSlot::Reg { ty, .. } if ty.is_ref() => 1,
+                    &ABIArgSlot::Reg { .. } => 0,
+                    &ABIArgSlot::Stack { extension, .. }
+                        if extension != ir::ArgumentExtension::None =>
+                    {
+                        1
+                    }
+                    &ABIArgSlot::Stack { .. } => 0,
+                })
+                .sum(),
+            ABIArg::ImplicitPtrArg { .. } => 1,
+            _ => 0,
+        };
+        let mut temps: SmallVec<[Writable<Reg>; 16]> = (0..needed_tmps)
+            .map(|_| ctx.alloc_tmp(M::word_type()).only_reg().unwrap())
+            .collect();
+
+        match &ctx.sigs().args(self.sig)[idx] {
+            &ABIArg::Slots { ref slots, .. } => {
+                assert_eq!(from_regs.len(), slots.len());
+                for (slot, from_reg) in slots.iter().zip(from_regs.regs().iter()) {
+                    match slot {
+                        &ABIArgSlot::Reg {
+                            reg, ty, extension, ..
+                        } => {
+                            let ext = M::get_ext_mode(ctx.sigs()[self.sig].call_conv, extension);
+                            if ext != ir::ArgumentExtension::None && ty_bits(ty) < word_bits {
+                                assert_eq!(word_rc, reg.class());
+                                let signed = match ext {
+                                    ir::ArgumentExtension::Uext => false,
+                                    ir::ArgumentExtension::Sext => true,
+                                    _ => unreachable!(),
+                                };
+                                let extend_result =
+                                    temps.pop().expect("Must have allocated enough temps");
+                                insts.push(M::gen_extend(
+                                    extend_result,
+                                    *from_reg,
+                                    signed,
+                                    ty_bits(ty) as u8,
+                                    word_bits as u8,
+                                ));
+                                self.uses.push(CallArgPair {
+                                    vreg: extend_result.to_reg(),
+                                    preg: reg.into(),
+                                });
+                            } else if ty.is_ref() {
+                                // Reference-typed args need to be
+                                // passed as a copy; the original vreg
+                                // is constrained to the stack and
+                                // this copy is in a reg.
+                                let ref_copy =
+                                    temps.pop().expect("Must have allocated enough temps");
+                                insts.push(M::gen_move(ref_copy, *from_reg, M::word_type()));
+                                self.uses.push(CallArgPair {
+                                    vreg: ref_copy.to_reg(),
+                                    preg: reg.into(),
+                                });
+                            } else {
+                                self.uses.push(CallArgPair {
+                                    vreg: *from_reg,
+                                    preg: reg.into(),
+                                });
+                            }
+                        }
+                        &ABIArgSlot::Stack {
+                            offset,
+                            ty,
+                            extension,
+                            ..
+                        } => {
+                            let ext = M::get_ext_mode(ctx.sigs()[self.sig].call_conv, extension);
+                            let (data, ty) =
+                                if ext != ir::ArgumentExtension::None && ty_bits(ty) < word_bits {
+                                    assert_eq!(word_rc, from_reg.class());
+                                    let signed = match ext {
+                                        ir::ArgumentExtension::Uext => false,
+                                        ir::ArgumentExtension::Sext => true,
+                                        _ => unreachable!(),
+                                    };
+                                    let extend_result =
+                                        temps.pop().expect("Must have allocated enough temps");
+                                    insts.push(M::gen_extend(
+                                        extend_result,
+                                        *from_reg,
+                                        signed,
+                                        ty_bits(ty) as u8,
+                                        word_bits as u8,
+                                    ));
+                                    // Store the extended version.
+                                    (extend_result.to_reg(), M::word_type())
+                                } else {
+                                    (*from_reg, ty)
+                                };
+                            insts.push(M::gen_store_stack(
+                                StackAMode::SPOffset(offset, ty),
+                                data,
+                                ty,
+                            ));
+                        }
+                    }
+                }
+            }
+            &ABIArg::StructArg { pointer, .. } => {
+                assert!(pointer.is_none()); // Only supported via ISLE.
+            }
+            &ABIArg::ImplicitPtrArg {
+                offset,
+                pointer,
+                ty,
+                purpose: _,
+            } => {
+                assert_eq!(from_regs.len(), 1);
+                let vreg = from_regs.regs()[0];
+                let amode = StackAMode::SPOffset(offset, ty);
+                let tmp = temps[0];
+                insts.push(M::gen_get_stack_addr(amode, tmp, ty));
+                let tmp = tmp.to_reg();
+                insts.push(M::gen_store_base_offset(tmp, 0, vreg, ty));
+                match pointer {
+                    ABIArgSlot::Reg { reg, .. } => {
+                        self.uses.push(CallArgPair {
+                            vreg: tmp,
+                            preg: reg.into(),
+                        });
+                    }
+                    ABIArgSlot::Stack { offset, .. } => {
+                        let ty = M::word_type();
+                        insts.push(M::gen_store_stack(
+                            StackAMode::SPOffset(offset, ty),
+                            tmp,
+                            ty,
+                        ));
+                    }
+                };
+            }
+        }
+        insts
+    }
+
+    /// Call `gen_arg` for each non-hidden argument and emit all instructions
+    /// generated.
+    pub fn emit_args(&mut self, ctx: &mut Lower<M::I>, (inputs, off): isle::ValueSlice) {
+        let num_args = self.num_args(ctx.sigs());
+        assert_eq!(inputs.len(&ctx.dfg().value_lists) - off, num_args);
+
+        let mut arg_value_regs: SmallVec<[_; 16]> = smallvec![];
+        for i in 0..num_args {
+            let input = inputs.get(off + i, &ctx.dfg().value_lists).unwrap();
+            arg_value_regs.push(ctx.put_value_in_regs(input));
+        }
+        for (i, arg_regs) in arg_value_regs.iter().enumerate() {
+            self.emit_copy_regs_to_buffer(ctx, i, *arg_regs);
+        }
+        for (i, value_regs) in arg_value_regs.iter().enumerate() {
+            for inst in self.gen_arg(ctx, i, *value_regs) {
+                ctx.emit(inst);
+            }
+        }
+    }
+
+    /// Define a return value after the call returns.
+    pub fn gen_retval(
+        &mut self,
+        ctx: &Lower<M::I>,
+        idx: usize,
+        into_regs: ValueRegs<Writable<Reg>>,
+    ) -> SmallInstVec<M::I> {
+        let mut insts = smallvec![];
+        match &ctx.sigs().rets(self.sig)[idx] {
+            &ABIArg::Slots { ref slots, .. } => {
+                assert_eq!(into_regs.len(), slots.len());
+                for (slot, into_reg) in slots.iter().zip(into_regs.regs().iter()) {
+                    match slot {
+                        // Extension mode doesn't matter because we're copying out, not in,
+                        // and we ignore high bits in our own registers by convention.
+                        &ABIArgSlot::Reg { reg, .. } => {
+                            self.defs.push(CallRetPair {
+                                vreg: *into_reg,
+                                preg: reg.into(),
+                            });
+                        }
+                        &ABIArgSlot::Stack { offset, ty, .. } => {
+                            let sig_data = &ctx.sigs()[self.sig];
+                            let ret_area_base = if sig_data.call_conv() == isa::CallConv::Tail {
+                                // The callee already popped the stack argument
+                                // space for us, so the return area is on top of
+                                // the stack.
+                                0
+                            } else {
+                                // The return area is just below the stack
+                                // argument area on the stack.
+                                sig_data.sized_stack_arg_space()
+                            };
+                            insts.push(M::gen_load_stack(
+                                StackAMode::SPOffset(offset + ret_area_base, ty),
+                                *into_reg,
+                                ty,
+                            ));
+                        }
+                    }
+                }
+            }
+            &ABIArg::StructArg { .. } => {
+                panic!("StructArg not supported in return position");
+            }
+            &ABIArg::ImplicitPtrArg { .. } => {
+                panic!("ImplicitPtrArg not supported in return position");
+            }
+        }
+        insts
+    }
+
+    /// Emit the call itself.
+    ///
+    /// The returned instruction should have proper use- and def-sets according
+    /// to the argument registers, return-value registers, and clobbered
+    /// registers for this function signature in this ABI.
+    ///
+    /// (Arg registers are uses, and retval registers are defs. Clobbered
+    /// registers are also logically defs, but should never be read; their
+    /// values are "defined" (to the regalloc) but "undefined" in every other
+    /// sense.)
+    ///
+    /// This function should only be called once, as it is allowed to re-use
+    /// parts of the `CallSite` object in emitting instructions.
+    pub fn emit_call(&mut self, ctx: &mut Lower<M::I>) {
+        let word_type = M::word_type();
+        if let Some(i) = ctx.sigs()[self.sig].stack_ret_arg {
+            let rd = ctx.alloc_tmp(word_type).only_reg().unwrap();
+            let ret_area_base = ctx.sigs()[self.sig].sized_stack_arg_space();
+            ctx.emit(M::gen_get_stack_addr(
+                StackAMode::SPOffset(ret_area_base, I8),
+                rd,
+                I8,
+            ));
+            for inst in self.gen_arg(ctx, i.into(), ValueRegs::one(rd.to_reg())) {
+                ctx.emit(inst);
+            }
+        }
+
+        let (uses, defs) = (
+            mem::replace(&mut self.uses, Default::default()),
+            mem::replace(&mut self.defs, Default::default()),
+        );
+
+        let sig = &ctx.sigs()[self.sig];
+        let callee_pop_size = if sig.call_conv() == isa::CallConv::Tail {
+            // The tail calling convention has callees pop stack arguments.
+            sig.sized_stack_arg_space
+        } else {
+            0
+        };
+
+        let tmp = ctx.alloc_tmp(word_type).only_reg().unwrap();
+        for inst in M::gen_call(
+            &self.dest,
+            uses,
+            defs,
+            self.clobbers,
+            self.opcode,
+            tmp,
+            ctx.sigs()[self.sig].call_conv,
+            self.caller_conv,
+            callee_pop_size,
+        )
+        .into_iter()
+        {
+            ctx.emit(inst);
+        }
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::SigData;
+
+    #[test]
+    fn sig_data_size() {
+        // The size of `SigData` is performance sensitive, so make sure
+        // we don't regress it unintentionally.
+        assert_eq!(std::mem::size_of::<SigData>(), 24);
+    }
+}