wasmtime 10.0.1 → 11.0.0

data/ext/cargo-vendor/tokio-1.32.0/src/sync/broadcast.rs

@@ -0,0 +1,1514 @@
+//! A multi-producer, multi-consumer broadcast queue. Each sent value is seen by
+//! all consumers.
+//!
+//! A [`Sender`] is used to broadcast values to **all** connected [`Receiver`]
+//! values. [`Sender`] handles are clone-able, allowing concurrent send and
+//! receive actions. [`Sender`] and [`Receiver`] are both `Send` and `Sync` as
+//! long as `T` is `Send`.
+//!
+//! When a value is sent, **all** [`Receiver`] handles are notified and will
+//! receive the value. The value is stored once inside the channel and cloned on
+//! demand for each receiver. Once all receivers have received a clone of the
+//! value, the value is released from the channel.
+//!
+//! A channel is created by calling [`channel`], specifying the maximum number
+//! of messages the channel can retain at any given time.
+//!
+//! New [`Receiver`] handles are created by calling [`Sender::subscribe`]. The
+//! returned [`Receiver`] will receive values sent **after** the call to
+//! `subscribe`.
+//!
+//! This channel is also suitable for the single-producer multi-consumer
+//! use-case, where a single sender broadcasts values to many receivers.
+//!
+//! ## Lagging
+//!
+//! As sent messages must be retained until **all** [`Receiver`] handles receive
+//! a clone, broadcast channels are susceptible to the "slow receiver" problem.
+//! In this case, all but one receiver are able to receive values at the rate
+//! they are sent. Because one receiver is stalled, the channel starts to fill
+//! up.
+//!
+//! This broadcast channel implementation handles this case by setting a hard
+//! upper bound on the number of values the channel may retain at any given
+//! time. This upper bound is passed to the [`channel`] function as an argument.
+//!
+//! If a value is sent when the channel is at capacity, the oldest value
+//! currently held by the channel is released. This frees up space for the new
+//! value. Any receiver that has not yet seen the released value will return
+//! [`RecvError::Lagged`] the next time [`recv`] is called.
+//!
+//! Once [`RecvError::Lagged`] is returned, the lagging receiver's position is
+//! updated to the oldest value contained by the channel. The next call to
+//! [`recv`] will return this value.
+//!
+//! This behavior enables a receiver to detect when it has lagged so far behind
+//! that data has been dropped. The caller may decide how to respond to this:
+//! either by aborting its task or by tolerating lost messages and resuming
+//! consumption of the channel.
+//!
+//! ## Closing
+//!
+//! When **all** [`Sender`] handles have been dropped, no new values may be
+//! sent. At this point, the channel is "closed". Once a receiver has received
+//! all values retained by the channel, the next call to [`recv`] will return
+//! with [`RecvError::Closed`].
+//!
+//! When a [`Receiver`] handle is dropped, any messages not read by the receiver
+//! will be marked as read. If this receiver was the only one not to have read
+//! that message, the message will be dropped at this point.
+//!
+//! [`Sender`]: crate::sync::broadcast::Sender
+//! [`Sender::subscribe`]: crate::sync::broadcast::Sender::subscribe
+//! [`Receiver`]: crate::sync::broadcast::Receiver
+//! [`channel`]: crate::sync::broadcast::channel
+//! [`RecvError::Lagged`]: crate::sync::broadcast::error::RecvError::Lagged
+//! [`RecvError::Closed`]: crate::sync::broadcast::error::RecvError::Closed
+//! [`recv`]: crate::sync::broadcast::Receiver::recv
+//!
+//! # Examples
+//!
+//! Basic usage
+//!
+//! ```
+//! use tokio::sync::broadcast;
+//!
+//! #[tokio::main]
+//! async fn main() {
+//!     let (tx, mut rx1) = broadcast::channel(16);
+//!     let mut rx2 = tx.subscribe();
+//!
+//!     tokio::spawn(async move {
+//!         assert_eq!(rx1.recv().await.unwrap(), 10);
+//!         assert_eq!(rx1.recv().await.unwrap(), 20);
+//!     });
+//!
+//!     tokio::spawn(async move {
+//!         assert_eq!(rx2.recv().await.unwrap(), 10);
+//!         assert_eq!(rx2.recv().await.unwrap(), 20);
+//!     });
+//!
+//!     tx.send(10).unwrap();
+//!     tx.send(20).unwrap();
+//! }
+//! ```
+//!
+//! Handling lag
+//!
+//! ```
+//! use tokio::sync::broadcast;
+//!
+//! #[tokio::main]
+//! async fn main() {
+//!     let (tx, mut rx) = broadcast::channel(2);
+//!
+//!     tx.send(10).unwrap();
+//!     tx.send(20).unwrap();
+//!     tx.send(30).unwrap();
+//!
+//!     // The receiver lagged behind
+//!     assert!(rx.recv().await.is_err());
+//!
+//!     // At this point, we can abort or continue with lost messages
+//!
+//!     assert_eq!(20, rx.recv().await.unwrap());
+//!     assert_eq!(30, rx.recv().await.unwrap());
+//! }
+//! ```
+
+use crate::loom::cell::UnsafeCell;
+use crate::loom::sync::atomic::AtomicUsize;
+use crate::loom::sync::{Arc, Mutex, MutexGuard, RwLock, RwLockReadGuard};
+use crate::util::linked_list::{self, GuardedLinkedList, LinkedList};
+use crate::util::WakeList;
+
+use std::fmt;
+use std::future::Future;
+use std::marker::PhantomPinned;
+use std::pin::Pin;
+use std::ptr::NonNull;
+use std::sync::atomic::Ordering::SeqCst;
+use std::task::{Context, Poll, Waker};
+use std::usize;
+
+/// Sending-half of the [`broadcast`] channel.
+///
+/// May be used from many threads. Messages can be sent with
+/// [`send`][Sender::send].
+///
+/// # Examples
+///
+/// ```
+/// use tokio::sync::broadcast;
+///
+/// #[tokio::main]
+/// async fn main() {
+///     let (tx, mut rx1) = broadcast::channel(16);
+///     let mut rx2 = tx.subscribe();
+///
+///     tokio::spawn(async move {
+///         assert_eq!(rx1.recv().await.unwrap(), 10);
+///         assert_eq!(rx1.recv().await.unwrap(), 20);
+///     });
+///
+///     tokio::spawn(async move {
+///         assert_eq!(rx2.recv().await.unwrap(), 10);
+///         assert_eq!(rx2.recv().await.unwrap(), 20);
+///     });
+///
+///     tx.send(10).unwrap();
+///     tx.send(20).unwrap();
+/// }
+/// ```
+///
+/// [`broadcast`]: crate::sync::broadcast
+pub struct Sender<T> {
+    shared: Arc<Shared<T>>,
+}
+
+/// Receiving-half of the [`broadcast`] channel.
+///
+/// Must not be used concurrently. Messages may be retrieved using
+/// [`recv`][Receiver::recv].
+///
+/// To turn this receiver into a `Stream`, you can use the [`BroadcastStream`]
+/// wrapper.
+///
+/// [`BroadcastStream`]: https://docs.rs/tokio-stream/0.1/tokio_stream/wrappers/struct.BroadcastStream.html
+///
+/// # Examples
+///
+/// ```
+/// use tokio::sync::broadcast;
+///
+/// #[tokio::main]
+/// async fn main() {
+///     let (tx, mut rx1) = broadcast::channel(16);
+///     let mut rx2 = tx.subscribe();
+///
+///     tokio::spawn(async move {
+///         assert_eq!(rx1.recv().await.unwrap(), 10);
+///         assert_eq!(rx1.recv().await.unwrap(), 20);
+///     });
+///
+///     tokio::spawn(async move {
+///         assert_eq!(rx2.recv().await.unwrap(), 10);
+///         assert_eq!(rx2.recv().await.unwrap(), 20);
+///     });
+///
+///     tx.send(10).unwrap();
+///     tx.send(20).unwrap();
+/// }
+/// ```
+///
+/// [`broadcast`]: crate::sync::broadcast
+pub struct Receiver<T> {
+    /// State shared with all receivers and senders.
+    shared: Arc<Shared<T>>,
+
+    /// Next position to read from
+    next: u64,
+}
+
+pub mod error {
+    //! Broadcast error types
+
+    use std::fmt;
+
+    /// Error returned by from the [`send`] function on a [`Sender`].
+    ///
+    /// A **send** operation can only fail if there are no active receivers,
+    /// implying that the message could never be received. The error contains the
+    /// message being sent as a payload so it can be recovered.
+    ///
+    /// [`send`]: crate::sync::broadcast::Sender::send
+    /// [`Sender`]: crate::sync::broadcast::Sender
+    #[derive(Debug)]
+    pub struct SendError<T>(pub T);
+
+    impl<T> fmt::Display for SendError<T> {
+        fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+            write!(f, "channel closed")
+        }
+    }
+
+    impl<T: fmt::Debug> std::error::Error for SendError<T> {}
+
+    /// An error returned from the [`recv`] function on a [`Receiver`].
+    ///
+    /// [`recv`]: crate::sync::broadcast::Receiver::recv
+    /// [`Receiver`]: crate::sync::broadcast::Receiver
+    #[derive(Debug, PartialEq, Eq, Clone)]
+    pub enum RecvError {
+        /// There are no more active senders implying no further messages will ever
+        /// be sent.
+        Closed,
+
+        /// The receiver lagged too far behind. Attempting to receive again will
+        /// return the oldest message still retained by the channel.
+        ///
+        /// Includes the number of skipped messages.
+        Lagged(u64),
+    }
+
+    impl fmt::Display for RecvError {
+        fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+            match self {
+                RecvError::Closed => write!(f, "channel closed"),
+                RecvError::Lagged(amt) => write!(f, "channel lagged by {}", amt),
+            }
+        }
+    }
+
+    impl std::error::Error for RecvError {}
+
+    /// An error returned from the [`try_recv`] function on a [`Receiver`].
+    ///
+    /// [`try_recv`]: crate::sync::broadcast::Receiver::try_recv
+    /// [`Receiver`]: crate::sync::broadcast::Receiver
+    #[derive(Debug, PartialEq, Eq, Clone)]
+    pub enum TryRecvError {
+        /// The channel is currently empty. There are still active
+        /// [`Sender`] handles, so data may yet become available.
+        ///
+        /// [`Sender`]: crate::sync::broadcast::Sender
+        Empty,
+
+        /// There are no more active senders implying no further messages will ever
+        /// be sent.
+        Closed,
+
+        /// The receiver lagged too far behind and has been forcibly disconnected.
+        /// Attempting to receive again will return the oldest message still
+        /// retained by the channel.
+        ///
+        /// Includes the number of skipped messages.
+        Lagged(u64),
+    }
+
+    impl fmt::Display for TryRecvError {
+        fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+            match self {
+                TryRecvError::Empty => write!(f, "channel empty"),
+                TryRecvError::Closed => write!(f, "channel closed"),
+                TryRecvError::Lagged(amt) => write!(f, "channel lagged by {}", amt),
+            }
+        }
+    }
+
+    impl std::error::Error for TryRecvError {}
+}
+
+use self::error::*;
+
+/// Data shared between senders and receivers.
+struct Shared<T> {
+    /// slots in the channel.
+    buffer: Box<[RwLock<Slot<T>>]>,
+
+    /// Mask a position -> index.
+    mask: usize,
+
+    /// Tail of the queue. Includes the rx wait list.
+    tail: Mutex<Tail>,
+
+    /// Number of outstanding Sender handles.
+    num_tx: AtomicUsize,
+}
+
+/// Next position to write a value.
+struct Tail {
+    /// Next position to write to.
+    pos: u64,
+
+    /// Number of active receivers.
+    rx_cnt: usize,
+
+    /// True if the channel is closed.
+    closed: bool,
+
+    /// Receivers waiting for a value.
+    waiters: LinkedList<Waiter, <Waiter as linked_list::Link>::Target>,
+}
+
+/// Slot in the buffer.
+struct Slot<T> {
+    /// Remaining number of receivers that are expected to see this value.
+    ///
+    /// When this goes to zero, the value is released.
+    ///
+    /// An atomic is used as it is mutated concurrently with the slot read lock
+    /// acquired.
+    rem: AtomicUsize,
+
+    /// Uniquely identifies the `send` stored in the slot.
+    pos: u64,
+
+    /// The value being broadcast.
+    ///
+    /// The value is set by `send` when the write lock is held. When a reader
+    /// drops, `rem` is decremented. When it hits zero, the value is dropped.
+    val: UnsafeCell<Option<T>>,
+}
+
+/// An entry in the wait queue.
+struct Waiter {
+    /// True if queued.
+    queued: bool,
+
+    /// Task waiting on the broadcast channel.
+    waker: Option<Waker>,
+
+    /// Intrusive linked-list pointers.
+    pointers: linked_list::Pointers<Waiter>,
+
+    /// Should not be `Unpin`.
+    _p: PhantomPinned,
+}
+
+impl Waiter {
+    fn new() -> Self {
+        Self {
+            queued: false,
+            waker: None,
+            pointers: linked_list::Pointers::new(),
+            _p: PhantomPinned,
+        }
+    }
+}
+
+generate_addr_of_methods! {
+    impl<> Waiter {
+        unsafe fn addr_of_pointers(self: NonNull<Self>) -> NonNull<linked_list::Pointers<Waiter>> {
+            &self.pointers
+        }
+    }
+}
+
+struct RecvGuard<'a, T> {
+    slot: RwLockReadGuard<'a, Slot<T>>,
+}
+
+/// Receive a value future.
+struct Recv<'a, T> {
+    /// Receiver being waited on.
+    receiver: &'a mut Receiver<T>,
+
+    /// Entry in the waiter `LinkedList`.
+    waiter: UnsafeCell<Waiter>,
+}
+
+unsafe impl<'a, T: Send> Send for Recv<'a, T> {}
+unsafe impl<'a, T: Send> Sync for Recv<'a, T> {}
+
+/// Max number of receivers. Reserve space to lock.
+const MAX_RECEIVERS: usize = usize::MAX >> 2;
+
+/// Create a bounded, multi-producer, multi-consumer channel where each sent
+/// value is broadcasted to all active receivers.
+///
+/// All data sent on [`Sender`] will become available on every active
+/// [`Receiver`] in the same order as it was sent.
+///
+/// The `Sender` can be cloned to `send` to the same channel from multiple
+/// points in the process or it can be used concurrently from an `Arc`. New
+/// `Receiver` handles are created by calling [`Sender::subscribe`].
+///
+/// If all [`Receiver`] handles are dropped, the `send` method will return a
+/// [`SendError`]. Similarly, if all [`Sender`] handles are dropped, the [`recv`]
+/// method will return a [`RecvError`].
+///
+/// [`Sender`]: crate::sync::broadcast::Sender
+/// [`Sender::subscribe`]: crate::sync::broadcast::Sender::subscribe
+/// [`Receiver`]: crate::sync::broadcast::Receiver
+/// [`recv`]: crate::sync::broadcast::Receiver::recv
+/// [`SendError`]: crate::sync::broadcast::error::SendError
+/// [`RecvError`]: crate::sync::broadcast::error::RecvError
+///
+/// # Examples
+///
+/// ```
+/// use tokio::sync::broadcast;
+///
+/// #[tokio::main]
+/// async fn main() {
+///     let (tx, mut rx1) = broadcast::channel(16);
+///     let mut rx2 = tx.subscribe();
+///
+///     tokio::spawn(async move {
+///         assert_eq!(rx1.recv().await.unwrap(), 10);
+///         assert_eq!(rx1.recv().await.unwrap(), 20);
+///     });
+///
+///     tokio::spawn(async move {
+///         assert_eq!(rx2.recv().await.unwrap(), 10);
+///         assert_eq!(rx2.recv().await.unwrap(), 20);
+///     });
+///
+///     tx.send(10).unwrap();
+///     tx.send(20).unwrap();
+/// }
+/// ```
+///
+/// # Panics
+///
+/// This will panic if `capacity` is equal to `0` or larger
+/// than `usize::MAX / 2`.
+#[track_caller]
+pub fn channel<T: Clone>(capacity: usize) -> (Sender<T>, Receiver<T>) {
+    // SAFETY: In the line below we are creating one extra receiver, so there will be 1 in total.
+    let tx = unsafe { Sender::new_with_receiver_count(1, capacity) };
+    let rx = Receiver {
+        shared: tx.shared.clone(),
+        next: 0,
+    };
+    (tx, rx)
+}
+
+unsafe impl<T: Send> Send for Sender<T> {}
+unsafe impl<T: Send> Sync for Sender<T> {}
+
+unsafe impl<T: Send> Send for Receiver<T> {}
+unsafe impl<T: Send> Sync for Receiver<T> {}
+
+impl<T> Sender<T> {
+    /// Creates the sending-half of the [`broadcast`] channel.
+    ///
+    /// See documentation of [`broadcast::channel`] for errors when calling this function.
+    ///
+    /// [`broadcast`]: crate::sync::broadcast
+    /// [`broadcast::channel`]: crate::sync::broadcast
+    #[track_caller]
+    pub fn new(capacity: usize) -> Self {
+        // SAFETY: We don't create extra receivers, so there are 0.
+        unsafe { Self::new_with_receiver_count(0, capacity) }
+    }
+
+    /// Creates the sending-half of the [`broadcast`](self) channel, and provide the receiver
+    /// count.
+    ///
+    /// See the documentation of [`broadcast::channel`](self::channel) for more errors when
+    /// calling this function.
+    ///
+    /// # Safety:
+    ///
+    /// The caller must ensure that the amount of receivers for this Sender is correct before
+    /// the channel functionalities are used, the count is zero by default, as this function
+    /// does not create any receivers by itself.
+    #[track_caller]
+    unsafe fn new_with_receiver_count(receiver_count: usize, mut capacity: usize) -> Self {
+        assert!(capacity > 0, "broadcast channel capacity cannot be zero");
+        assert!(
+            capacity <= usize::MAX >> 1,
+            "broadcast channel capacity exceeded `usize::MAX / 2`"
+        );
+
+        // Round to a power of two
+        capacity = capacity.next_power_of_two();
+
+        let mut buffer = Vec::with_capacity(capacity);
+
+        for i in 0..capacity {
+            buffer.push(RwLock::new(Slot {
+                rem: AtomicUsize::new(0),
+                pos: (i as u64).wrapping_sub(capacity as u64),
+                val: UnsafeCell::new(None),
+            }));
+        }
+
+        let shared = Arc::new(Shared {
+            buffer: buffer.into_boxed_slice(),
+            mask: capacity - 1,
+            tail: Mutex::new(Tail {
+                pos: 0,
+                rx_cnt: receiver_count,
+                closed: false,
+                waiters: LinkedList::new(),
+            }),
+            num_tx: AtomicUsize::new(1),
+        });
+
+        Sender { shared }
+    }
+
+    /// Attempts to send a value to all active [`Receiver`] handles, returning
+    /// it back if it could not be sent.
+    ///
+    /// A successful send occurs when there is at least one active [`Receiver`]
+    /// handle. An unsuccessful send would be one where all associated
+    /// [`Receiver`] handles have already been dropped.
+    ///
+    /// # Return
+    ///
+    /// On success, the number of subscribed [`Receiver`] handles is returned.
+    /// This does not mean that this number of receivers will see the message as
+    /// a receiver may drop or lag ([see lagging](self#lagging)) before receiving
+    /// the message.
+    ///
+    /// # Note
+    ///
+    /// A return value of `Ok` **does not** mean that the sent value will be
+    /// observed by all or any of the active [`Receiver`] handles. [`Receiver`]
+    /// handles may be dropped before receiving the sent message.
+    ///
+    /// A return value of `Err` **does not** mean that future calls to `send`
+    /// will fail. New [`Receiver`] handles may be created by calling
+    /// [`subscribe`].
+    ///
+    /// [`Receiver`]: crate::sync::broadcast::Receiver
+    /// [`subscribe`]: crate::sync::broadcast::Sender::subscribe
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx1) = broadcast::channel(16);
+    ///     let mut rx2 = tx.subscribe();
+    ///
+    ///     tokio::spawn(async move {
+    ///         assert_eq!(rx1.recv().await.unwrap(), 10);
+    ///         assert_eq!(rx1.recv().await.unwrap(), 20);
+    ///     });
+    ///
+    ///     tokio::spawn(async move {
+    ///         assert_eq!(rx2.recv().await.unwrap(), 10);
+    ///         assert_eq!(rx2.recv().await.unwrap(), 20);
+    ///     });
+    ///
+    ///     tx.send(10).unwrap();
+    ///     tx.send(20).unwrap();
+    /// }
+    /// ```
+    pub fn send(&self, value: T) -> Result<usize, SendError<T>> {
+        let mut tail = self.shared.tail.lock();
+
+        if tail.rx_cnt == 0 {
+            return Err(SendError(value));
+        }
+
+        // Position to write into
+        let pos = tail.pos;
+        let rem = tail.rx_cnt;
+        let idx = (pos & self.shared.mask as u64) as usize;
+
+        // Update the tail position
+        tail.pos = tail.pos.wrapping_add(1);
+
+        // Get the slot
+        let mut slot = self.shared.buffer[idx].write().unwrap();
+
+        // Track the position
+        slot.pos = pos;
+
+        // Set remaining receivers
+        slot.rem.with_mut(|v| *v = rem);
+
+        // Write the value
+        slot.val = UnsafeCell::new(Some(value));
+
+        // Release the slot lock before notifying the receivers.
+        drop(slot);
+
+        // Notify and release the mutex. This must happen after the slot lock is
+        // released, otherwise the writer lock bit could be cleared while another
+        // thread is in the critical section.
+        self.shared.notify_rx(tail);
+
+        Ok(rem)
+    }
+
+    /// Creates a new [`Receiver`] handle that will receive values sent **after**
+    /// this call to `subscribe`.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, _rx) = broadcast::channel(16);
+    ///
+    ///     // Will not be seen
+    ///     tx.send(10).unwrap();
+    ///
+    ///     let mut rx = tx.subscribe();
+    ///
+    ///     tx.send(20).unwrap();
+    ///
+    ///     let value = rx.recv().await.unwrap();
+    ///     assert_eq!(20, value);
+    /// }
+    /// ```
+    pub fn subscribe(&self) -> Receiver<T> {
+        let shared = self.shared.clone();
+        new_receiver(shared)
+    }
+
+    /// Returns the number of queued values.
+    ///
+    /// A value is queued until it has either been seen by all receivers that were alive at the time
+    /// it was sent, or has been evicted from the queue by subsequent sends that exceeded the
+    /// queue's capacity.
+    ///
+    /// # Note
+    ///
+    /// In contrast to [`Receiver::len`], this method only reports queued values and not values that
+    /// have been evicted from the queue before being seen by all receivers.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx1) = broadcast::channel(16);
+    ///     let mut rx2 = tx.subscribe();
+    ///
+    ///     tx.send(10).unwrap();
+    ///     tx.send(20).unwrap();
+    ///     tx.send(30).unwrap();
+    ///
+    ///     assert_eq!(tx.len(), 3);
+    ///
+    ///     rx1.recv().await.unwrap();
+    ///
+    ///     // The len is still 3 since rx2 hasn't seen the first value yet.
+    ///     assert_eq!(tx.len(), 3);
+    ///
+    ///     rx2.recv().await.unwrap();
+    ///
+    ///     assert_eq!(tx.len(), 2);
+    /// }
+    /// ```
+    pub fn len(&self) -> usize {
+        let tail = self.shared.tail.lock();
+
+        let base_idx = (tail.pos & self.shared.mask as u64) as usize;
+        let mut low = 0;
+        let mut high = self.shared.buffer.len();
+        while low < high {
+            let mid = low + (high - low) / 2;
+            let idx = base_idx.wrapping_add(mid) & self.shared.mask;
+            if self.shared.buffer[idx].read().unwrap().rem.load(SeqCst) == 0 {
+                low = mid + 1;
+            } else {
+                high = mid;
+            }
+        }
+
+        self.shared.buffer.len() - low
+    }
+
+    /// Returns true if there are no queued values.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx1) = broadcast::channel(16);
+    ///     let mut rx2 = tx.subscribe();
+    ///
+    ///     assert!(tx.is_empty());
+    ///
+    ///     tx.send(10).unwrap();
+    ///
+    ///     assert!(!tx.is_empty());
+    ///
+    ///     rx1.recv().await.unwrap();
+    ///
+    ///     // The queue is still not empty since rx2 hasn't seen the value.
+    ///     assert!(!tx.is_empty());
+    ///
+    ///     rx2.recv().await.unwrap();
+    ///
+    ///     assert!(tx.is_empty());
+    /// }
+    /// ```
+    pub fn is_empty(&self) -> bool {
+        let tail = self.shared.tail.lock();
+
+        let idx = (tail.pos.wrapping_sub(1) & self.shared.mask as u64) as usize;
+        self.shared.buffer[idx].read().unwrap().rem.load(SeqCst) == 0
+    }
+
+    /// Returns the number of active receivers
+    ///
+    /// An active receiver is a [`Receiver`] handle returned from [`channel`] or
+    /// [`subscribe`]. These are the handles that will receive values sent on
+    /// this [`Sender`].
+    ///
+    /// # Note
+    ///
+    /// It is not guaranteed that a sent message will reach this number of
+    /// receivers. Active receivers may never call [`recv`] again before
+    /// dropping.
+    ///
+    /// [`recv`]: crate::sync::broadcast::Receiver::recv
+    /// [`Receiver`]: crate::sync::broadcast::Receiver
+    /// [`Sender`]: crate::sync::broadcast::Sender
+    /// [`subscribe`]: crate::sync::broadcast::Sender::subscribe
+    /// [`channel`]: crate::sync::broadcast::channel
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, _rx1) = broadcast::channel(16);
+    ///
+    ///     assert_eq!(1, tx.receiver_count());
+    ///
+    ///     let mut _rx2 = tx.subscribe();
+    ///
+    ///     assert_eq!(2, tx.receiver_count());
+    ///
+    ///     tx.send(10).unwrap();
+    /// }
+    /// ```
+    pub fn receiver_count(&self) -> usize {
+        let tail = self.shared.tail.lock();
+        tail.rx_cnt
+    }
+
+    /// Returns `true` if senders belong to the same channel.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, _rx) = broadcast::channel::<()>(16);
+    ///     let tx2 = tx.clone();
+    ///
+    ///     assert!(tx.same_channel(&tx2));
+    ///
+    ///     let (tx3, _rx3) = broadcast::channel::<()>(16);
+    ///
+    ///     assert!(!tx3.same_channel(&tx2));
+    /// }
+    /// ```
+    pub fn same_channel(&self, other: &Self) -> bool {
+        Arc::ptr_eq(&self.shared, &other.shared)
+    }
+
+    fn close_channel(&self) {
+        let mut tail = self.shared.tail.lock();
+        tail.closed = true;
+
+        self.shared.notify_rx(tail);
+    }
+}
+
+/// Create a new `Receiver` which reads starting from the tail.
+fn new_receiver<T>(shared: Arc<Shared<T>>) -> Receiver<T> {
+    let mut tail = shared.tail.lock();
+
+    if tail.rx_cnt == MAX_RECEIVERS {
+        panic!("max receivers");
+    }
+
+    tail.rx_cnt = tail.rx_cnt.checked_add(1).expect("overflow");
+
+    let next = tail.pos;
+
+    drop(tail);
+
+    Receiver { shared, next }
+}
+
+/// List used in `Shared::notify_rx`. It wraps a guarded linked list
+/// and gates the access to it on the `Shared.tail` mutex. It also empties
+/// the list on drop.
+struct WaitersList<'a, T> {
+    list: GuardedLinkedList<Waiter, <Waiter as linked_list::Link>::Target>,
+    is_empty: bool,
+    shared: &'a Shared<T>,
+}
+
+impl<'a, T> Drop for WaitersList<'a, T> {
+    fn drop(&mut self) {
+        // If the list is not empty, we unlink all waiters from it.
+        // We do not wake the waiters to avoid double panics.
+        if !self.is_empty {
+            let _lock_guard = self.shared.tail.lock();
+            while self.list.pop_back().is_some() {}
+        }
+    }
+}
+
+impl<'a, T> WaitersList<'a, T> {
+    fn new(
+        unguarded_list: LinkedList<Waiter, <Waiter as linked_list::Link>::Target>,
+        guard: Pin<&'a Waiter>,
+        shared: &'a Shared<T>,
+    ) -> Self {
+        let guard_ptr = NonNull::from(guard.get_ref());
+        let list = unguarded_list.into_guarded(guard_ptr);
+        WaitersList {
+            list,
+            is_empty: false,
+            shared,
+        }
+    }
+
+    /// Removes the last element from the guarded list. Modifying this list
+    /// requires an exclusive access to the main list in `Notify`.
+    fn pop_back_locked(&mut self, _tail: &mut Tail) -> Option<NonNull<Waiter>> {
+        let result = self.list.pop_back();
+        if result.is_none() {
+            // Save information about emptiness to avoid waiting for lock
+            // in the destructor.
+            self.is_empty = true;
+        }
+        result
+    }
+}
+
+impl<T> Shared<T> {
+    fn notify_rx<'a, 'b: 'a>(&'b self, mut tail: MutexGuard<'a, Tail>) {
+        // It is critical for `GuardedLinkedList` safety that the guard node is
+        // pinned in memory and is not dropped until the guarded list is dropped.
+        let guard = Waiter::new();
+        pin!(guard);
+
+        // We move all waiters to a secondary list. It uses a `GuardedLinkedList`
+        // underneath to allow every waiter to safely remove itself from it.
+        //
+        // * This list will be still guarded by the `waiters` lock.
+        //   `NotifyWaitersList` wrapper makes sure we hold the lock to modify it.
+        // * This wrapper will empty the list on drop. It is critical for safety
+        //   that we will not leave any list entry with a pointer to the local
+        //   guard node after this function returns / panics.
+        let mut list = WaitersList::new(std::mem::take(&mut tail.waiters), guard.as_ref(), self);
+
+        let mut wakers = WakeList::new();
+        'outer: loop {
+            while wakers.can_push() {
+                match list.pop_back_locked(&mut tail) {
+                    Some(mut waiter) => {
+                        // Safety: `tail` lock is still held.
+                        let waiter = unsafe { waiter.as_mut() };
+
+                        assert!(waiter.queued);
+                        waiter.queued = false;
+
+                        if let Some(waker) = waiter.waker.take() {
+                            wakers.push(waker);
+                        }
+                    }
+                    None => {
+                        break 'outer;
+                    }
+                }
+            }
+
+            // Release the lock before waking.
+            drop(tail);
+
+            // Before we acquire the lock again all sorts of things can happen:
+            // some waiters may remove themselves from the list and new waiters
+            // may be added. This is fine since at worst we will unnecessarily
+            // wake up waiters which will then queue themselves again.
+
+            wakers.wake_all();
+
+            // Acquire the lock again.
+            tail = self.tail.lock();
+        }
+
+        // Release the lock before waking.
+        drop(tail);
+
+        wakers.wake_all();
+    }
+}
+
+impl<T> Clone for Sender<T> {
+    fn clone(&self) -> Sender<T> {
+        let shared = self.shared.clone();
+        shared.num_tx.fetch_add(1, SeqCst);
+
+        Sender { shared }
+    }
+}
+
+impl<T> Drop for Sender<T> {
+    fn drop(&mut self) {
+        if 1 == self.shared.num_tx.fetch_sub(1, SeqCst) {
+            self.close_channel();
+        }
+    }
+}
+
+impl<T> Receiver<T> {
+    /// Returns the number of messages that were sent into the channel and that
+    /// this [`Receiver`] has yet to receive.
+    ///
+    /// If the returned value from `len` is larger than the next largest power of 2
+    /// of the capacity of the channel any call to [`recv`] will return an
+    /// `Err(RecvError::Lagged)` and any call to [`try_recv`] will return an
+    /// `Err(TryRecvError::Lagged)`, e.g. if the capacity of the channel is 10,
+    /// [`recv`] will start to return `Err(RecvError::Lagged)` once `len` returns
+    /// values larger than 16.
+    ///
+    /// [`Receiver`]: crate::sync::broadcast::Receiver
+    /// [`recv`]: crate::sync::broadcast::Receiver::recv
+    /// [`try_recv`]: crate::sync::broadcast::Receiver::try_recv
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx1) = broadcast::channel(16);
+    ///
+    ///     tx.send(10).unwrap();
+    ///     tx.send(20).unwrap();
+    ///
+    ///     assert_eq!(rx1.len(), 2);
+    ///     assert_eq!(rx1.recv().await.unwrap(), 10);
+    ///     assert_eq!(rx1.len(), 1);
+    ///     assert_eq!(rx1.recv().await.unwrap(), 20);
+    ///     assert_eq!(rx1.len(), 0);
+    /// }
+    /// ```
+    pub fn len(&self) -> usize {
+        let next_send_pos = self.shared.tail.lock().pos;
+        (next_send_pos - self.next) as usize
+    }
+
+    /// Returns true if there aren't any messages in the channel that the [`Receiver`]
+    /// has yet to receive.
+    ///
+    /// [`Receiver]: create::sync::broadcast::Receiver
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx1) = broadcast::channel(16);
+    ///
+    ///     assert!(rx1.is_empty());
+    ///
+    ///     tx.send(10).unwrap();
+    ///     tx.send(20).unwrap();
+    ///
+    ///     assert!(!rx1.is_empty());
+    ///     assert_eq!(rx1.recv().await.unwrap(), 10);
+    ///     assert_eq!(rx1.recv().await.unwrap(), 20);
+    ///     assert!(rx1.is_empty());
+    /// }
+    /// ```
+    pub fn is_empty(&self) -> bool {
+        self.len() == 0
+    }
+
+    /// Returns `true` if receivers belong to the same channel.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, rx) = broadcast::channel::<()>(16);
+    ///     let rx2 = tx.subscribe();
+    ///
+    ///     assert!(rx.same_channel(&rx2));
+    ///
+    ///     let (_tx3, rx3) = broadcast::channel::<()>(16);
+    ///
+    ///     assert!(!rx3.same_channel(&rx2));
+    /// }
+    /// ```
+    pub fn same_channel(&self, other: &Self) -> bool {
+        Arc::ptr_eq(&self.shared, &other.shared)
+    }
+
+    /// Locks the next value if there is one.
+    fn recv_ref(
+        &mut self,
+        waiter: Option<(&UnsafeCell<Waiter>, &Waker)>,
+    ) -> Result<RecvGuard<'_, T>, TryRecvError> {
+        let idx = (self.next & self.shared.mask as u64) as usize;
+
+        // The slot holding the next value to read
+        let mut slot = self.shared.buffer[idx].read().unwrap();
+
+        if slot.pos != self.next {
+            // Release the `slot` lock before attempting to acquire the `tail`
+            // lock. This is required because `send2` acquires the tail lock
+            // first followed by the slot lock. Acquiring the locks in reverse
+            // order here would result in a potential deadlock: `recv_ref`
+            // acquires the `slot` lock and attempts to acquire the `tail` lock
+            // while `send2` acquired the `tail` lock and attempts to acquire
+            // the slot lock.
+            drop(slot);
+
+            let mut old_waker = None;
+
+            let mut tail = self.shared.tail.lock();
+
+            // Acquire slot lock again
+            slot = self.shared.buffer[idx].read().unwrap();
+
+            // Make sure the position did not change. This could happen in the
+            // unlikely event that the buffer is wrapped between dropping the
+            // read lock and acquiring the tail lock.
+            if slot.pos != self.next {
+                let next_pos = slot.pos.wrapping_add(self.shared.buffer.len() as u64);
+
+                if next_pos == self.next {
+                    // At this point the channel is empty for *this* receiver. If
+                    // it's been closed, then that's what we return, otherwise we
+                    // set a waker and return empty.
+                    if tail.closed {
+                        return Err(TryRecvError::Closed);
+                    }
+
+                    // Store the waker
+                    if let Some((waiter, waker)) = waiter {
+                        // Safety: called while locked.
+                        unsafe {
+                            // Only queue if not already queued
+                            waiter.with_mut(|ptr| {
+                                // If there is no waker **or** if the currently
+                                // stored waker references a **different** task,
+                                // track the tasks' waker to be notified on
+                                // receipt of a new value.
+                                match (*ptr).waker {
+                                    Some(ref w) if w.will_wake(waker) => {}
+                                    _ => {
+                                        old_waker = std::mem::replace(
+                                            &mut (*ptr).waker,
+                                            Some(waker.clone()),
+                                        );
+                                    }
+                                }
+
+                                if !(*ptr).queued {
+                                    (*ptr).queued = true;
+                                    tail.waiters.push_front(NonNull::new_unchecked(&mut *ptr));
+                                }
+                            });
+                        }
+                    }
+
+                    // Drop the old waker after releasing the locks.
+                    drop(slot);
+                    drop(tail);
+                    drop(old_waker);
+
+                    return Err(TryRecvError::Empty);
+                }
+
+                // At this point, the receiver has lagged behind the sender by
+                // more than the channel capacity. The receiver will attempt to
+                // catch up by skipping dropped messages and setting the
+                // internal cursor to the **oldest** message stored by the
+                // channel.
+                let next = tail.pos.wrapping_sub(self.shared.buffer.len() as u64);
+
+                let missed = next.wrapping_sub(self.next);
+
+                drop(tail);
+
+                // The receiver is slow but no values have been missed
+                if missed == 0 {
+                    self.next = self.next.wrapping_add(1);
+
+                    return Ok(RecvGuard { slot });
+                }
+
+                self.next = next;
+
+                return Err(TryRecvError::Lagged(missed));
+            }
+        }
+
+        self.next = self.next.wrapping_add(1);
+
+        Ok(RecvGuard { slot })
+    }
+}
+
+impl<T: Clone> Receiver<T> {
+    /// Re-subscribes to the channel starting from the current tail element.
+    ///
+    /// This [`Receiver`] handle will receive a clone of all values sent
+    /// **after** it has resubscribed. This will not include elements that are
+    /// in the queue of the current receiver. Consider the following example.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///   let (tx, mut rx) = broadcast::channel(2);
+    ///
+    ///   tx.send(1).unwrap();
+    ///   let mut rx2 = rx.resubscribe();
+    ///   tx.send(2).unwrap();
+    ///
+    ///   assert_eq!(rx2.recv().await.unwrap(), 2);
+    ///   assert_eq!(rx.recv().await.unwrap(), 1);
+    /// }
+    /// ```
+    pub fn resubscribe(&self) -> Self {
+        let shared = self.shared.clone();
+        new_receiver(shared)
+    }
+    /// Receives the next value for this receiver.
+    ///
+    /// Each [`Receiver`] handle will receive a clone of all values sent
+    /// **after** it has subscribed.
+    ///
+    /// `Err(RecvError::Closed)` is returned when all `Sender` halves have
+    /// dropped, indicating that no further values can be sent on the channel.
+    ///
+    /// If the [`Receiver`] handle falls behind, once the channel is full, newly
+    /// sent values will overwrite old values. At this point, a call to [`recv`]
+    /// will return with `Err(RecvError::Lagged)` and the [`Receiver`]'s
+    /// internal cursor is updated to point to the oldest value still held by
+    /// the channel. A subsequent call to [`recv`] will return this value
+    /// **unless** it has been since overwritten.
+    ///
+    /// # Cancel safety
+    ///
+    /// This method is cancel safe. If `recv` is used as the event in a
+    /// [`tokio::select!`](crate::select) statement and some other branch
+    /// completes first, it is guaranteed that no messages were received on this
+    /// channel.
+    ///
+    /// [`Receiver`]: crate::sync::broadcast::Receiver
+    /// [`recv`]: crate::sync::broadcast::Receiver::recv
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx1) = broadcast::channel(16);
+    ///     let mut rx2 = tx.subscribe();
+    ///
+    ///     tokio::spawn(async move {
+    ///         assert_eq!(rx1.recv().await.unwrap(), 10);
+    ///         assert_eq!(rx1.recv().await.unwrap(), 20);
+    ///     });
+    ///
+    ///     tokio::spawn(async move {
+    ///         assert_eq!(rx2.recv().await.unwrap(), 10);
+    ///         assert_eq!(rx2.recv().await.unwrap(), 20);
+    ///     });
+    ///
+    ///     tx.send(10).unwrap();
+    ///     tx.send(20).unwrap();
+    /// }
+    /// ```
+    ///
+    /// Handling lag
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx) = broadcast::channel(2);
+    ///
+    ///     tx.send(10).unwrap();
+    ///     tx.send(20).unwrap();
+    ///     tx.send(30).unwrap();
+    ///
+    ///     // The receiver lagged behind
+    ///     assert!(rx.recv().await.is_err());
+    ///
+    ///     // At this point, we can abort or continue with lost messages
+    ///
+    ///     assert_eq!(20, rx.recv().await.unwrap());
+    ///     assert_eq!(30, rx.recv().await.unwrap());
+    /// }
+    /// ```
+    pub async fn recv(&mut self) -> Result<T, RecvError> {
+        let fut = Recv::new(self);
+        fut.await
+    }
+
+    /// Attempts to return a pending value on this receiver without awaiting.
+    ///
+    /// This is useful for a flavor of "optimistic check" before deciding to
+    /// await on a receiver.
+    ///
+    /// Compared with [`recv`], this function has three failure cases instead of two
+    /// (one for closed, one for an empty buffer, one for a lagging receiver).
+    ///
+    /// `Err(TryRecvError::Closed)` is returned when all `Sender` halves have
+    /// dropped, indicating that no further values can be sent on the channel.
+    ///
+    /// If the [`Receiver`] handle falls behind, once the channel is full, newly
+    /// sent values will overwrite old values. At this point, a call to [`recv`]
+    /// will return with `Err(TryRecvError::Lagged)` and the [`Receiver`]'s
+    /// internal cursor is updated to point to the oldest value still held by
+    /// the channel. A subsequent call to [`try_recv`] will return this value
+    /// **unless** it has been since overwritten. If there are no values to
+    /// receive, `Err(TryRecvError::Empty)` is returned.
+    ///
+    /// [`recv`]: crate::sync::broadcast::Receiver::recv
+    /// [`try_recv`]: crate::sync::broadcast::Receiver::try_recv
+    /// [`Receiver`]: crate::sync::broadcast::Receiver
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx) = broadcast::channel(16);
+    ///
+    ///     assert!(rx.try_recv().is_err());
+    ///
+    ///     tx.send(10).unwrap();
+    ///
+    ///     let value = rx.try_recv().unwrap();
+    ///     assert_eq!(10, value);
+    /// }
+    /// ```
+    pub fn try_recv(&mut self) -> Result<T, TryRecvError> {
+        let guard = self.recv_ref(None)?;
+        guard.clone_value().ok_or(TryRecvError::Closed)
+    }
+
+    /// Blocking receive to call outside of asynchronous contexts.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if called within an asynchronous execution
+    /// context.
+    ///
+    /// # Examples
+    /// ```
+    /// use std::thread;
+    /// use tokio::sync::broadcast;
+    ///
+    /// #[tokio::main]
+    /// async fn main() {
+    ///     let (tx, mut rx) = broadcast::channel(16);
+    ///
+    ///     let sync_code = thread::spawn(move || {
+    ///         assert_eq!(rx.blocking_recv(), Ok(10));
+    ///     });
+    ///
+    ///     let _ = tx.send(10);
+    ///     sync_code.join().unwrap();
+    /// }
+    pub fn blocking_recv(&mut self) -> Result<T, RecvError> {
+        crate::future::block_on(self.recv())
+    }
+}
+
+impl<T> Drop for Receiver<T> {
+    fn drop(&mut self) {
+        let mut tail = self.shared.tail.lock();
+
+        tail.rx_cnt -= 1;
+        let until = tail.pos;
+
+        drop(tail);
+
+        while self.next < until {
+            match self.recv_ref(None) {
+                Ok(_) => {}
+                // The channel is closed
+                Err(TryRecvError::Closed) => break,
+                // Ignore lagging, we will catch up
+                Err(TryRecvError::Lagged(..)) => {}
+                // Can't be empty
+                Err(TryRecvError::Empty) => panic!("unexpected empty broadcast channel"),
+            }
+        }
+    }
+}
+
+impl<'a, T> Recv<'a, T> {
+    fn new(receiver: &'a mut Receiver<T>) -> Recv<'a, T> {
+        Recv {
+            receiver,
+            waiter: UnsafeCell::new(Waiter {
+                queued: false,
+                waker: None,
+                pointers: linked_list::Pointers::new(),
+                _p: PhantomPinned,
+            }),
+        }
+    }
+
+    /// A custom `project` implementation is used in place of `pin-project-lite`
+    /// as a custom drop implementation is needed.
+    fn project(self: Pin<&mut Self>) -> (&mut Receiver<T>, &UnsafeCell<Waiter>) {
+        unsafe {
+            // Safety: Receiver is Unpin
+            is_unpin::<&mut Receiver<T>>();
+
+            let me = self.get_unchecked_mut();
+            (me.receiver, &me.waiter)
+        }
+    }
+}
+
+impl<'a, T> Future for Recv<'a, T>
+where
+    T: Clone,
+{
+    type Output = Result<T, RecvError>;
+
+    fn poll(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<T, RecvError>> {
+        ready!(crate::trace::trace_leaf(cx));
+
+        let (receiver, waiter) = self.project();
+
+        let guard = match receiver.recv_ref(Some((waiter, cx.waker()))) {
+            Ok(value) => value,
+            Err(TryRecvError::Empty) => return Poll::Pending,
+            Err(TryRecvError::Lagged(n)) => return Poll::Ready(Err(RecvError::Lagged(n))),
+            Err(TryRecvError::Closed) => return Poll::Ready(Err(RecvError::Closed)),
+        };
+
+        Poll::Ready(guard.clone_value().ok_or(RecvError::Closed))
+    }
+}
+
+impl<'a, T> Drop for Recv<'a, T> {
+    fn drop(&mut self) {
+        // Acquire the tail lock. This is required for safety before accessing
+        // the waiter node.
+        let mut tail = self.receiver.shared.tail.lock();
+
+        // safety: tail lock is held
+        let queued = self.waiter.with(|ptr| unsafe { (*ptr).queued });
+
+        if queued {
+            // Remove the node
+            //
+            // safety: tail lock is held and the wait node is verified to be in
+            // the list.
+            unsafe {
+                self.waiter.with_mut(|ptr| {
+                    tail.waiters.remove((&mut *ptr).into());
+                });
+            }
+        }
+    }
+}
+
+/// # Safety
+///
+/// `Waiter` is forced to be !Unpin.
+unsafe impl linked_list::Link for Waiter {
+    type Handle = NonNull<Waiter>;
+    type Target = Waiter;
+
+    fn as_raw(handle: &NonNull<Waiter>) -> NonNull<Waiter> {
+        *handle
+    }
+
+    unsafe fn from_raw(ptr: NonNull<Waiter>) -> NonNull<Waiter> {
+        ptr
+    }
+
+    unsafe fn pointers(target: NonNull<Waiter>) -> NonNull<linked_list::Pointers<Waiter>> {
+        Waiter::addr_of_pointers(target)
+    }
+}
+
+impl<T> fmt::Debug for Sender<T> {
+    fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
+        write!(fmt, "broadcast::Sender")
+    }
+}
+
+impl<T> fmt::Debug for Receiver<T> {
+    fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
+        write!(fmt, "broadcast::Receiver")
+    }
+}
+
+impl<'a, T> RecvGuard<'a, T> {
+    fn clone_value(&self) -> Option<T>
+    where
+        T: Clone,
+    {
+        self.slot.val.with(|ptr| unsafe { (*ptr).clone() })
+    }
+}
+
+impl<'a, T> Drop for RecvGuard<'a, T> {
+    fn drop(&mut self) {
+        // Decrement the remaining counter
+        if 1 == self.slot.rem.fetch_sub(1, SeqCst) {
+            // Safety: Last receiver, drop the value
+            self.slot.val.with_mut(|ptr| unsafe { *ptr = None });
+        }
+    }
+}
+
+fn is_unpin<T: Unpin>() {}
+
+#[cfg(not(loom))]
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn receiver_count_on_sender_constructor() {
+        let sender = Sender::<i32>::new(16);
+        assert_eq!(sender.receiver_count(), 0);
+
+        let rx_1 = sender.subscribe();
+        assert_eq!(sender.receiver_count(), 1);
+
+        let rx_2 = rx_1.resubscribe();
+        assert_eq!(sender.receiver_count(), 2);
+
+        let rx_3 = sender.subscribe();
+        assert_eq!(sender.receiver_count(), 3);
+
+        drop(rx_3);
+        drop(rx_1);
+        assert_eq!(sender.receiver_count(), 1);
+
+        drop(rx_2);
+        assert_eq!(sender.receiver_count(), 0);
+    }
+
+    #[cfg(not(loom))]
+    #[test]
+    fn receiver_count_on_channel_constructor() {
+        let (sender, rx) = channel::<i32>(16);
+        assert_eq!(sender.receiver_count(), 1);
+
+        let _rx_2 = rx.resubscribe();
+        assert_eq!(sender.receiver_count(), 2);
+    }
+}