rroonga 7.1.1-x86-mingw32 → 9.0.2-x86-mingw32

data/vendor/local/include/lz4frame_static.h

@@ -0,0 +1,47 @@
+/*
+   LZ4 auto-framing library
+   Header File for static linking only
+   Copyright (C) 2011-2016, Yann Collet.
+
+   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+       * Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above
+   copyright notice, this list of conditions and the following disclaimer
+   in the documentation and/or other materials provided with the
+   distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+   You can contact the author at :
+   - LZ4 source repository : https://github.com/lz4/lz4
+   - LZ4 public forum : https://groups.google.com/forum/#!forum/lz4c
+*/
+
+#ifndef LZ4FRAME_STATIC_H_0398209384
+#define LZ4FRAME_STATIC_H_0398209384
+
+/* The declarations that formerly were made here have been merged into
+ * lz4frame.h, protected by the LZ4F_STATIC_LINKING_ONLY macro. Going forward,
+ * it is recommended to simply include that header directly.
+ */
+
+#define LZ4F_STATIC_LINKING_ONLY
+#include "lz4frame.h"
+
+#endif /* LZ4FRAME_STATIC_H_0398209384 */

data/vendor/local/include/lz4hc.h

@@ -1,7 +1,7 @@
 /*
    LZ4 HC - High Compression Mode of LZ4
    Header File
-   Copyright (C) 2011-2014, Yann Collet.
+   Copyright (C) 2011-2017, Yann Collet.
    BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
 
    Redistribution and use in source and binary forms, with or without
@@ -28,147 +28,320 @@
    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
    You can contact the author at :
-   - LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
-   - LZ4 source repository : http://code.google.com/p/lz4/
+   - LZ4 source repository : https://github.com/lz4/lz4
+   - LZ4 public forum : https://groups.google.com/forum/#!forum/lz4c
 */
-#pragma once
-
+#ifndef LZ4_HC_H_19834876238432
+#define LZ4_HC_H_19834876238432
 
 #if defined (__cplusplus)
 extern "C" {
 #endif
 
+/* --- Dependency --- */
+/* note : lz4hc requires lz4.h/lz4.c for compilation */
+#include "lz4.h"   /* stddef, LZ4LIB_API, LZ4_DEPRECATED */
 
-int LZ4_compressHC (const char* source, char* dest, int inputSize);
-/*
-LZ4_compressHC :
-    return : the number of bytes in compressed buffer dest
-             or 0 if compression fails.
-    note : destination buffer must be already allocated.
-        To avoid any problem, size it to handle worst cases situations (input data not compressible)
-        Worst case size evaluation is provided by function LZ4_compressBound() (see "lz4.h")
-*/
 
-int LZ4_compressHC_limitedOutput (const char* source, char* dest, int inputSize, int maxOutputSize);
-/*
-LZ4_compress_limitedOutput() :
-    Compress 'inputSize' bytes from 'source' into an output buffer 'dest' of maximum size 'maxOutputSize'.
-    If it cannot achieve it, compression will stop, and result of the function will be zero.
-    This function never writes outside of provided output buffer.
-
-    inputSize  : Max supported value is 1 GB
-    maxOutputSize : is maximum allowed size into the destination buffer (which must be already allocated)
-    return : the number of output bytes written in buffer 'dest'
-             or 0 if compression fails.
-*/
+/* --- Useful constants --- */
+#define LZ4HC_CLEVEL_MIN         3
+#define LZ4HC_CLEVEL_DEFAULT     9
+#define LZ4HC_CLEVEL_OPT_MIN    10
+#define LZ4HC_CLEVEL_MAX        12
 
 
-int LZ4_compressHC2 (const char* source, char* dest, int inputSize, int compressionLevel);
-int LZ4_compressHC2_limitedOutput (const char* source, char* dest, int inputSize, int maxOutputSize, int compressionLevel);
-/*
-    Same functions as above, but with programmable 'compressionLevel'.
-    Recommended values are between 4 and 9, although any value between 0 and 16 will work.
-    'compressionLevel'==0 means use default 'compressionLevel' value.
-    Values above 16 behave the same as 16.
-    Equivalent variants exist for all other compression functions below.
-*/
-
-/* Note :
-   Decompression functions are provided within LZ4 source code (see "lz4.h") (BSD license)
-*/
+/*-************************************
+ *  Block Compression
+ **************************************/
+/*! LZ4_compress_HC() :
+ *  Compress data from `src` into `dst`, using the more powerful but slower "HC" algorithm.
+ * `dst` must be already allocated.
+ *  Compression is guaranteed to succeed if `dstCapacity >= LZ4_compressBound(srcSize)` (see "lz4.h")
+ *  Max supported `srcSize` value is LZ4_MAX_INPUT_SIZE (see "lz4.h")
+ * `compressionLevel` : any value between 1 and LZ4HC_CLEVEL_MAX will work.
+ *                      Values > LZ4HC_CLEVEL_MAX behave the same as LZ4HC_CLEVEL_MAX.
+ * @return : the number of bytes written into 'dst'
+ *           or 0 if compression fails.
+ */
+LZ4LIB_API int LZ4_compress_HC (const char* src, char* dst, int srcSize, int dstCapacity, int compressionLevel);
 
 
-/**************************************
-   Using an external allocation
-**************************************/
-int LZ4_sizeofStateHC(void);
-int LZ4_compressHC_withStateHC               (void* state, const char* source, char* dest, int inputSize);
-int LZ4_compressHC_limitedOutput_withStateHC (void* state, const char* source, char* dest, int inputSize, int maxOutputSize);
-
-int LZ4_compressHC2_withStateHC              (void* state, const char* source, char* dest, int inputSize, int compressionLevel);
-int LZ4_compressHC2_limitedOutput_withStateHC(void* state, const char* source, char* dest, int inputSize, int maxOutputSize, int compressionLevel);
+/* Note :
+ *   Decompression functions are provided within "lz4.h" (BSD license)
+ */
 
-/*
-These functions are provided should you prefer to allocate memory for compression tables with your own allocation methods.
-To know how much memory must be allocated for the compression tables, use :
-int LZ4_sizeofStateHC();
 
-Note that tables must be aligned for pointer (32 or 64 bits), otherwise compression will fail (return code 0).
+/*! LZ4_compress_HC_extStateHC() :
+ *  Same as LZ4_compress_HC(), but using an externally allocated memory segment for `state`.
+ * `state` size is provided by LZ4_sizeofStateHC().
+ *  Memory segment must be aligned on 8-bytes boundaries (which a normal malloc() should do properly).
+ */
+LZ4LIB_API int LZ4_sizeofStateHC(void);
+LZ4LIB_API int LZ4_compress_HC_extStateHC(void* state, const char* src, char* dst, int srcSize, int maxDstSize, int compressionLevel);
 
-The allocated memory can be provided to the compression functions using 'void* state' parameter.
-LZ4_compress_withStateHC() and LZ4_compress_limitedOutput_withStateHC() are equivalent to previously described functions.
-They just use the externally allocated memory for state instead of allocating their own (on stack, or on heap).
-*/
 
+/*-************************************
+ *  Streaming Compression
+ *  Bufferless synchronous API
+ **************************************/
+ typedef union LZ4_streamHC_u LZ4_streamHC_t;   /* incomplete type (defined later) */
 
+/*! LZ4_createStreamHC() and LZ4_freeStreamHC() :
+ *  These functions create and release memory for LZ4 HC streaming state.
+ *  Newly created states are automatically initialized.
+ *  Existing states can be re-used several times, using LZ4_resetStreamHC().
+ *  These methods are API and ABI stable, they can be used in combination with a DLL.
+ */
+LZ4LIB_API LZ4_streamHC_t* LZ4_createStreamHC(void);
+LZ4LIB_API int             LZ4_freeStreamHC (LZ4_streamHC_t* streamHCPtr);
 
-/**************************************
-   Experimental Streaming Functions
-**************************************/
-#define LZ4_STREAMHCSIZE_U64 32774
-#define LZ4_STREAMHCSIZE     (LZ4_STREAMHCSIZE_U64 * sizeof(unsigned long long))
-typedef struct { unsigned long long table[LZ4_STREAMHCSIZE_U64]; } LZ4_streamHC_t;
-/*
-LZ4_streamHC_t
-This structure allows static allocation of LZ4 HC streaming state.
-State must then be initialized using LZ4_resetStreamHC() before first use.
+LZ4LIB_API void LZ4_resetStreamHC (LZ4_streamHC_t* streamHCPtr, int compressionLevel);
+LZ4LIB_API int  LZ4_loadDictHC (LZ4_streamHC_t* streamHCPtr, const char* dictionary, int dictSize);
 
-Static allocation should only be used with statically linked library.
-If you want to use LZ4 as a DLL, please use construction functions below, which are more future-proof.
-*/
+LZ4LIB_API int LZ4_compress_HC_continue (LZ4_streamHC_t* streamHCPtr, const char* src, char* dst, int srcSize, int maxDstSize);
 
+LZ4LIB_API int LZ4_saveDictHC (LZ4_streamHC_t* streamHCPtr, char* safeBuffer, int maxDictSize);
 
-LZ4_streamHC_t* LZ4_createStreamHC(void);
-int             LZ4_freeStreamHC (LZ4_streamHC_t* LZ4_streamHCPtr);
 /*
-These functions create and release memory for LZ4 HC streaming state.
-Newly created states are already initialized.
-Existing state space can be re-used anytime using LZ4_resetStreamHC().
-If you use LZ4 as a DLL, please use these functions instead of direct struct allocation,
-to avoid size mismatch between different versions.
+  These functions compress data in successive blocks of any size, using previous blocks as dictionary.
+  One key assumption is that previous blocks (up to 64 KB) remain read-accessible while compressing next blocks.
+  There is an exception for ring buffers, which can be smaller than 64 KB.
+  Ring buffers scenario is automatically detected and handled by LZ4_compress_HC_continue().
+
+  Before starting compression, state must be properly initialized, using LZ4_resetStreamHC().
+  A first "fictional block" can then be designated as initial dictionary, using LZ4_loadDictHC() (Optional).
+
+  Then, use LZ4_compress_HC_continue() to compress each successive block.
+  Previous memory blocks (including initial dictionary when present) must remain accessible and unmodified during compression.
+  'dst' buffer should be sized to handle worst case scenarios (see LZ4_compressBound()), to ensure operation success.
+  Because in case of failure, the API does not guarantee context recovery, and context will have to be reset.
+  If `dst` buffer budget cannot be >= LZ4_compressBound(), consider using LZ4_compress_HC_continue_destSize() instead.
+
+  If, for any reason, previous data block can't be preserved unmodified in memory for next compression block,
+  you can save it to a more stable memory space, using LZ4_saveDictHC().
+  Return value of LZ4_saveDictHC() is the size of dictionary effectively saved into 'safeBuffer'.
 */
 
-void LZ4_resetStreamHC (LZ4_streamHC_t* LZ4_streamHCPtr, int compressionLevel);
-int  LZ4_loadDictHC (LZ4_streamHC_t* LZ4_streamHCPtr, const char* dictionary, int dictSize);
 
-int LZ4_compressHC_continue (LZ4_streamHC_t* LZ4_streamHCPtr, const char* source, char* dest, int inputSize);
-int LZ4_compressHC_limitedOutput_continue (LZ4_streamHC_t* LZ4_streamHCPtr, const char* source, char* dest, int inputSize, int maxOutputSize);
+/*-**************************************************************
+ * PRIVATE DEFINITIONS :
+ * Do not use these definitions.
+ * They are exposed to allow static allocation of `LZ4_streamHC_t`.
+ * Using these definitions makes the code vulnerable to potential API break when upgrading LZ4
+ ****************************************************************/
+#define LZ4HC_DICTIONARY_LOGSIZE 16
+#define LZ4HC_MAXD (1<<LZ4HC_DICTIONARY_LOGSIZE)
+#define LZ4HC_MAXD_MASK (LZ4HC_MAXD - 1)
+
+#define LZ4HC_HASH_LOG 15
+#define LZ4HC_HASHTABLESIZE (1 << LZ4HC_HASH_LOG)
+#define LZ4HC_HASH_MASK (LZ4HC_HASHTABLESIZE - 1)
+
+
+#if defined(__cplusplus) || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */)
+#include <stdint.h>
+
+typedef struct LZ4HC_CCtx_internal LZ4HC_CCtx_internal;
+struct LZ4HC_CCtx_internal
+{
+    uint32_t   hashTable[LZ4HC_HASHTABLESIZE];
+    uint16_t   chainTable[LZ4HC_MAXD];
+    const uint8_t* end;         /* next block here to continue on current prefix */
+    const uint8_t* base;        /* All index relative to this position */
+    const uint8_t* dictBase;    /* alternate base for extDict */
+    uint32_t   dictLimit;       /* below that point, need extDict */
+    uint32_t   lowLimit;        /* below that point, no more dict */
+    uint32_t   nextToUpdate;    /* index from which to continue dictionary update */
+    short      compressionLevel;
+    short      favorDecSpeed;
+    const LZ4HC_CCtx_internal* dictCtx;
+};
+
+#else
+
+typedef struct LZ4HC_CCtx_internal LZ4HC_CCtx_internal;
+struct LZ4HC_CCtx_internal
+{
+    unsigned int   hashTable[LZ4HC_HASHTABLESIZE];
+    unsigned short chainTable[LZ4HC_MAXD];
+    const unsigned char* end;        /* next block here to continue on current prefix */
+    const unsigned char* base;       /* All index relative to this position */
+    const unsigned char* dictBase;   /* alternate base for extDict */
+    unsigned int   dictLimit;        /* below that point, need extDict */
+    unsigned int   lowLimit;         /* below that point, no more dict */
+    unsigned int   nextToUpdate;     /* index from which to continue dictionary update */
+    short          compressionLevel;
+    short          favorDecSpeed;
+    const LZ4HC_CCtx_internal* dictCtx;
+};
 
-int LZ4_saveDictHC (LZ4_streamHC_t* LZ4_streamHCPtr, char* safeBuffer, int maxDictSize);
+#endif
 
+#define LZ4_STREAMHCSIZE       (4*LZ4HC_HASHTABLESIZE + 2*LZ4HC_MAXD + 56) /* 262200 */
+#define LZ4_STREAMHCSIZE_SIZET (LZ4_STREAMHCSIZE / sizeof(size_t))
+union LZ4_streamHC_u {
+    size_t table[LZ4_STREAMHCSIZE_SIZET];
+    LZ4HC_CCtx_internal internal_donotuse;
+};   /* previously typedef'd to LZ4_streamHC_t */
 /*
-These functions compress data in successive blocks of any size, using previous blocks as dictionary.
-One key assumption is that each previous block will remain read-accessible while compressing next block.
-
-Before starting compression, state must be properly initialized, using LZ4_resetStreamHC().
-A first "fictional block" can then be designated as initial dictionary, using LZ4_loadDictHC() (Optional).
+  LZ4_streamHC_t :
+  This structure allows static allocation of LZ4 HC streaming state.
+  State must be initialized using LZ4_resetStreamHC() before first use.
 
-Then, use LZ4_compressHC_continue() or LZ4_compressHC_limitedOutput_continue() to compress each successive block.
-They work like usual LZ4_compressHC() or LZ4_compressHC_limitedOutput(), but use previous memory blocks to improve compression.
-Previous memory blocks (including initial dictionary when present) must remain accessible and unmodified during compression.
-
-If, for any reason, previous data block can't be preserved in memory during next compression block,
-you must save it to a safer memory space,
-using LZ4_saveDictHC().
+  Static allocation shall only be used in combination with static linking.
+  When invoking LZ4 from a DLL, use create/free functions instead, which are API and ABI stable.
 */
 
 
-
-/**************************************
- * Deprecated Streaming Functions
- * ************************************/
-/* Note : these streaming functions follows the older model, and should no longer be used */
-void* LZ4_createHC (const char* inputBuffer);
-char* LZ4_slideInputBufferHC (void* LZ4HC_Data);
-int   LZ4_freeHC (void* LZ4HC_Data);
-
-int   LZ4_compressHC2_continue (void* LZ4HC_Data, const char* source, char* dest, int inputSize, int compressionLevel);
-int   LZ4_compressHC2_limitedOutput_continue (void* LZ4HC_Data, const char* source, char* dest, int inputSize, int maxOutputSize, int compressionLevel);
-
-int   LZ4_sizeofStreamStateHC(void);
-int   LZ4_resetStreamStateHC(void* state, const char* inputBuffer);
+/*-************************************
+*  Deprecated Functions
+**************************************/
+/* see lz4.h LZ4_DISABLE_DEPRECATE_WARNINGS to turn off deprecation warnings */
+
+/* deprecated compression functions */
+LZ4_DEPRECATED("use LZ4_compress_HC() instead") LZ4LIB_API int LZ4_compressHC               (const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_HC() instead") LZ4LIB_API int LZ4_compressHC_limitedOutput (const char* source, char* dest, int inputSize, int maxOutputSize);
+LZ4_DEPRECATED("use LZ4_compress_HC() instead") LZ4LIB_API int LZ4_compressHC2 (const char* source, char* dest, int inputSize, int compressionLevel);
+LZ4_DEPRECATED("use LZ4_compress_HC() instead") LZ4LIB_API int LZ4_compressHC2_limitedOutput (const char* source, char* dest, int inputSize, int maxOutputSize, int compressionLevel);
+LZ4_DEPRECATED("use LZ4_compress_HC_extStateHC() instead") LZ4LIB_API int LZ4_compressHC_withStateHC               (void* state, const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_HC_extStateHC() instead") LZ4LIB_API int LZ4_compressHC_limitedOutput_withStateHC (void* state, const char* source, char* dest, int inputSize, int maxOutputSize);
+LZ4_DEPRECATED("use LZ4_compress_HC_extStateHC() instead") LZ4LIB_API int LZ4_compressHC2_withStateHC (void* state, const char* source, char* dest, int inputSize, int compressionLevel);
+LZ4_DEPRECATED("use LZ4_compress_HC_extStateHC() instead") LZ4LIB_API int LZ4_compressHC2_limitedOutput_withStateHC(void* state, const char* source, char* dest, int inputSize, int maxOutputSize, int compressionLevel);
+LZ4_DEPRECATED("use LZ4_compress_HC_continue() instead") LZ4LIB_API int LZ4_compressHC_continue               (LZ4_streamHC_t* LZ4_streamHCPtr, const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_HC_continue() instead") LZ4LIB_API int LZ4_compressHC_limitedOutput_continue (LZ4_streamHC_t* LZ4_streamHCPtr, const char* source, char* dest, int inputSize, int maxOutputSize);
+
+/* Obsolete streaming functions; degraded functionality; do not use!
+ *
+ * In order to perform streaming compression, these functions depended on data
+ * that is no longer tracked in the state. They have been preserved as well as
+ * possible: using them will still produce a correct output. However, use of
+ * LZ4_slideInputBufferHC() will truncate the history of the stream, rather
+ * than preserve a window-sized chunk of history.
+ */
+LZ4_DEPRECATED("use LZ4_createStreamHC() instead") LZ4LIB_API void* LZ4_createHC (const char* inputBuffer);
+LZ4_DEPRECATED("use LZ4_saveDictHC() instead") LZ4LIB_API     char* LZ4_slideInputBufferHC (void* LZ4HC_Data);
+LZ4_DEPRECATED("use LZ4_freeStreamHC() instead") LZ4LIB_API   int   LZ4_freeHC (void* LZ4HC_Data);
+LZ4_DEPRECATED("use LZ4_compress_HC_continue() instead") LZ4LIB_API int LZ4_compressHC2_continue (void* LZ4HC_Data, const char* source, char* dest, int inputSize, int compressionLevel);
+LZ4_DEPRECATED("use LZ4_compress_HC_continue() instead") LZ4LIB_API int LZ4_compressHC2_limitedOutput_continue (void* LZ4HC_Data, const char* source, char* dest, int inputSize, int maxOutputSize, int compressionLevel);
+LZ4_DEPRECATED("use LZ4_createStreamHC() instead") LZ4LIB_API int   LZ4_sizeofStreamStateHC(void);
+LZ4_DEPRECATED("use LZ4_resetStreamHC() instead") LZ4LIB_API  int   LZ4_resetStreamStateHC(void* state, char* inputBuffer);
 
 
 #if defined (__cplusplus)
 }
 #endif
+
+#endif /* LZ4_HC_H_19834876238432 */
+
+
+/*-**************************************************
+ * !!!!!     STATIC LINKING ONLY     !!!!!
+ * Following definitions are considered experimental.
+ * They should not be linked from DLL,
+ * as there is no guarantee of API stability yet.
+ * Prototypes will be promoted to "stable" status
+ * after successfull usage in real-life scenarios.
+ ***************************************************/
+#ifdef LZ4_HC_STATIC_LINKING_ONLY   /* protection macro */
+#ifndef LZ4_HC_SLO_098092834
+#define LZ4_HC_SLO_098092834
+
+/*! LZ4_compress_HC_destSize() : v1.8.0 (experimental)
+ *  Will try to compress as much data from `src` as possible
+ *  that can fit into `targetDstSize` budget.
+ *  Result is provided in 2 parts :
+ * @return : the number of bytes written into 'dst'
+ *           or 0 if compression fails.
+ * `srcSizePtr` : value will be updated to indicate how much bytes were read from `src`
+ */
+int LZ4_compress_HC_destSize(void* LZ4HC_Data,
+                             const char* src, char* dst,
+                             int* srcSizePtr, int targetDstSize,
+                             int compressionLevel);
+
+/*! LZ4_compress_HC_continue_destSize() : v1.8.0 (experimental)
+ *  Similar as LZ4_compress_HC_continue(),
+ *  but will read a variable nb of bytes from `src`
+ *  to fit into `targetDstSize` budget.
+ *  Result is provided in 2 parts :
+ * @return : the number of bytes written into 'dst'
+ *           or 0 if compression fails.
+ * `srcSizePtr` : value will be updated to indicate how much bytes were read from `src`.
+ */
+int LZ4_compress_HC_continue_destSize(LZ4_streamHC_t* LZ4_streamHCPtr,
+                            const char* src, char* dst,
+                            int* srcSizePtr, int targetDstSize);
+
+/*! LZ4_setCompressionLevel() : v1.8.0 (experimental)
+ *  It's possible to change compression level between 2 invocations of LZ4_compress_HC_continue*()
+ */
+void LZ4_setCompressionLevel(LZ4_streamHC_t* LZ4_streamHCPtr, int compressionLevel);
+
+/*! LZ4_favorDecompressionSpeed() : v1.8.2 (experimental)
+ *  Parser will select decisions favoring decompression over compression ratio.
+ *  Only work at highest compression settings (level >= LZ4HC_CLEVEL_OPT_MIN)
+ */
+void LZ4_favorDecompressionSpeed(LZ4_streamHC_t* LZ4_streamHCPtr, int favor);
+
+/*! LZ4_resetStreamHC_fast() :
+ *  When an LZ4_streamHC_t is known to be in a internally coherent state,
+ *  it can often be prepared for a new compression with almost no work, only
+ *  sometimes falling back to the full, expensive reset that is always required
+ *  when the stream is in an indeterminate state (i.e., the reset performed by
+ *  LZ4_resetStreamHC()).
+ *
+ *  LZ4_streamHCs are guaranteed to be in a valid state when:
+ *  - returned from LZ4_createStreamHC()
+ *  - reset by LZ4_resetStreamHC()
+ *  - memset(stream, 0, sizeof(LZ4_streamHC_t))
+ *  - the stream was in a valid state and was reset by LZ4_resetStreamHC_fast()
+ *  - the stream was in a valid state and was then used in any compression call
+ *    that returned success
+ *  - the stream was in an indeterminate state and was used in a compression
+ *    call that fully reset the state (LZ4_compress_HC_extStateHC()) and that
+ *    returned success
+ */
+void LZ4_resetStreamHC_fast(LZ4_streamHC_t* LZ4_streamHCPtr, int compressionLevel);
+
+/*! LZ4_compress_HC_extStateHC_fastReset() :
+ *  A variant of LZ4_compress_HC_extStateHC().
+ *
+ *  Using this variant avoids an expensive initialization step. It is only safe
+ *  to call if the state buffer is known to be correctly initialized already
+ *  (see above comment on LZ4_resetStreamHC_fast() for a definition of
+ *  "correctly initialized"). From a high level, the difference is that this
+ *  function initializes the provided state with a call to
+ *  LZ4_resetStreamHC_fast() while LZ4_compress_HC_extStateHC() starts with a
+ *  call to LZ4_resetStreamHC().
+ */
+int LZ4_compress_HC_extStateHC_fastReset (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int compressionLevel);
+
+/*! LZ4_attach_HC_dictionary() :
+ *  This is an experimental API that allows for the efficient use of a
+ *  static dictionary many times.
+ *
+ *  Rather than re-loading the dictionary buffer into a working context before
+ *  each compression, or copying a pre-loaded dictionary's LZ4_streamHC_t into a
+ *  working LZ4_streamHC_t, this function introduces a no-copy setup mechanism,
+ *  in which the working stream references the dictionary stream in-place.
+ *
+ *  Several assumptions are made about the state of the dictionary stream.
+ *  Currently, only streams which have been prepared by LZ4_loadDictHC() should
+ *  be expected to work.
+ *
+ *  Alternatively, the provided dictionary stream pointer may be NULL, in which
+ *  case any existing dictionary stream is unset.
+ *
+ *  A dictionary should only be attached to a stream without any history (i.e.,
+ *  a stream that has just been reset).
+ *
+ *  The dictionary will remain attached to the working stream only for the
+ *  current stream session. Calls to LZ4_resetStreamHC(_fast) will remove the
+ *  dictionary context association from the working stream. The dictionary
+ *  stream (and source buffer) must remain in-place / accessible / unchanged
+ *  through the lifetime of the stream session.
+ */
+LZ4LIB_API void LZ4_attach_HC_dictionary(LZ4_streamHC_t *working_stream, const LZ4_streamHC_t *dictionary_stream);
+
+#endif   /* LZ4_HC_SLO_098092834 */
+#endif   /* LZ4_HC_STATIC_LINKING_ONLY */