rroonga 7.1.1-x86-mingw32 → 9.0.2-x86-mingw32

data/vendor/local/include/groonga/groonga/window_function_executor.h

@@ -0,0 +1,68 @@
+/*
+  Copyright(C) 2019 Kouhei Sutou <kou@clear-code.com>
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#pragma once
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+typedef struct _grn_window_function_executor grn_window_function_executor;
+
+GRN_API grn_window_function_executor *
+grn_window_function_executor_open(grn_ctx *ctx);
+GRN_API grn_rc
+grn_window_function_executor_close(grn_ctx *ctx,
+                                   grn_window_function_executor *executor);
+GRN_API grn_rc
+grn_window_function_executor_add_table(grn_ctx *ctx,
+                                       grn_window_function_executor *executor,
+                                       grn_obj *table);
+GRN_API grn_rc
+grn_window_function_executor_add_context_table(grn_ctx *ctx,
+                                               grn_window_function_executor *executor,
+                                               grn_obj *table);
+GRN_API grn_rc
+grn_window_function_executor_set_source(grn_ctx *ctx,
+                                        grn_window_function_executor *executor,
+                                        const char *source,
+                                        size_t source_size);
+GRN_API grn_rc
+grn_window_function_executor_set_sort_keys(grn_ctx *ctx,
+                                           grn_window_function_executor *executor,
+                                           const char *sort_keys,
+                                           size_t sort_keys_size);
+GRN_API grn_rc
+grn_window_function_executor_set_group_keys(grn_ctx *ctx,
+                                            grn_window_function_executor *executor,
+                                            const char *group_keys,
+                                            size_t group_keys_size);
+
+GRN_API grn_rc
+grn_window_function_executor_set_output_column_name(grn_ctx *ctx,
+                                                    grn_window_function_executor *executor,
+                                                    const char *name,
+                                                    size_t name_size);
+
+GRN_API grn_rc
+grn_window_function_executor_execute(grn_ctx *ctx,
+                                     grn_window_function_executor *executor);
+
+#ifdef __cplusplus
+}
+#endif

data/vendor/local/include/lz4.h

@@ -1,7 +1,8 @@
 /*
-   LZ4 - Fast LZ compression algorithm
-   Header File
-   Copyright (C) 2011-2014, Yann Collet.
+ *  LZ4 - Fast LZ compression algorithm
+ *  Header File
+ *  Copyright (C) 2011-2017, Yann Collet.
+
    BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
 
    Redistribution and use in source and binary forms, with or without
@@ -28,286 +29,577 @@
    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
    You can contact the author at :
-   - LZ4 source repository : http://code.google.com/p/lz4/
-   - LZ4 public forum : https://groups.google.com/forum/#!forum/lz4c
+    - LZ4 homepage : http://www.lz4.org
+    - LZ4 source repository : https://github.com/lz4/lz4
 */
-#pragma once
-
 #if defined (__cplusplus)
 extern "C" {
 #endif
 
+#ifndef LZ4_H_2983827168210
+#define LZ4_H_2983827168210
+
+/* --- Dependency --- */
+#include <stddef.h>   /* size_t */
+
+
+/**
+  Introduction
+
+  LZ4 is lossless compression algorithm, providing compression speed at 400 MB/s per core,
+  scalable with multi-cores CPU. It features an extremely fast decoder, with speed in
+  multiple GB/s per core, typically reaching RAM speed limits on multi-core systems.
+
+  The LZ4 compression library provides in-memory compression and decompression functions.
+  Compression can be done in:
+    - a single step (described as Simple Functions)
+    - a single step, reusing a context (described in Advanced Functions)
+    - unbounded multiple steps (described as Streaming compression)
+
+  lz4.h provides block compression functions. It gives full buffer control to user.
+  Decompressing an lz4-compressed block also requires metadata (such as compressed size).
+  Each application is free to encode such metadata in whichever way it wants.
+
+  An additional format, called LZ4 frame specification (doc/lz4_Frame_format.md),
+  take care of encoding standard metadata alongside LZ4-compressed blocks.
+  If your application requires interoperability, it's recommended to use it.
+  A library is provided to take care of it, see lz4frame.h.
+*/
+
+/*^***************************************************************
+*  Export parameters
+*****************************************************************/
 /*
- * lz4.h provides raw compression format functions, for optimal performance and integration into programs.
- * If you need to generate data using an inter-operable format (respecting the framing specification),
- * please use lz4frame.h instead.
+*  LZ4_DLL_EXPORT :
+*  Enable exporting of functions when building a Windows DLL
+*  LZ4LIB_VISIBILITY :
+*  Control library symbols visibility.
 */
+#ifndef LZ4LIB_VISIBILITY
+#  if defined(__GNUC__) && (__GNUC__ >= 4)
+#    define LZ4LIB_VISIBILITY __attribute__ ((visibility ("default")))
+#  else
+#    define LZ4LIB_VISIBILITY
+#  endif
+#endif
+#if defined(LZ4_DLL_EXPORT) && (LZ4_DLL_EXPORT==1)
+#  define LZ4LIB_API __declspec(dllexport) LZ4LIB_VISIBILITY
+#elif defined(LZ4_DLL_IMPORT) && (LZ4_DLL_IMPORT==1)
+#  define LZ4LIB_API __declspec(dllimport) LZ4LIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/
+#else
+#  define LZ4LIB_API LZ4LIB_VISIBILITY
+#endif
 
-/**************************************
-   Version
-**************************************/
+/*------   Version   ------*/
 #define LZ4_VERSION_MAJOR    1    /* for breaking interface changes  */
-#define LZ4_VERSION_MINOR    5    /* for new (non-breaking) interface capabilities */
-#define LZ4_VERSION_RELEASE  0    /* for tweaks, bug-fixes, or development */
+#define LZ4_VERSION_MINOR    8    /* for new (non-breaking) interface capabilities */
+#define LZ4_VERSION_RELEASE  2    /* for tweaks, bug-fixes, or development */
+
 #define LZ4_VERSION_NUMBER (LZ4_VERSION_MAJOR *100*100 + LZ4_VERSION_MINOR *100 + LZ4_VERSION_RELEASE)
-int LZ4_versionNumber (void);
 
-/**************************************
-   Tuning parameter
+#define LZ4_LIB_VERSION LZ4_VERSION_MAJOR.LZ4_VERSION_MINOR.LZ4_VERSION_RELEASE
+#define LZ4_QUOTE(str) #str
+#define LZ4_EXPAND_AND_QUOTE(str) LZ4_QUOTE(str)
+#define LZ4_VERSION_STRING LZ4_EXPAND_AND_QUOTE(LZ4_LIB_VERSION)
+
+LZ4LIB_API int LZ4_versionNumber (void);  /**< library version number; useful to check dll version */
+LZ4LIB_API const char* LZ4_versionString (void);   /**< library version string; unseful to check dll version */
+
+
+/*-************************************
+*  Tuning parameter
 **************************************/
-/*
+/*!
  * LZ4_MEMORY_USAGE :
  * Memory usage formula : N->2^N Bytes (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; etc.)
  * Increasing memory usage improves compression ratio
- * Reduced memory usage can improve speed, due to cache effect
+ * Reduced memory usage may improve speed, thanks to cache effect
  * Default value is 14, for 16KB, which nicely fits into Intel x86 L1 cache
  */
-#define LZ4_MEMORY_USAGE 14
-
+#ifndef LZ4_MEMORY_USAGE
+# define LZ4_MEMORY_USAGE 14
+#endif
 
-/**************************************
-   Simple Functions
+/*-************************************
+*  Simple Functions
 **************************************/
-
-int LZ4_compress        (const char* source, char* dest, int sourceSize);
-int LZ4_decompress_safe (const char* source, char* dest, int compressedSize, int maxDecompressedSize);
-
-/*
-LZ4_compress() :
-    Compresses 'sourceSize' bytes from 'source' into 'dest'.
-    Destination buffer must be already allocated,
-    and must be sized to handle worst cases situations (input data not compressible)
-    Worst case size evaluation is provided by function LZ4_compressBound()
-    inputSize : Max supported value is LZ4_MAX_INPUT_SIZE
-    return : the number of bytes written in buffer dest
-             or 0 if the compression fails
-
-LZ4_decompress_safe() :
-    compressedSize : is obviously the source size
-    maxDecompressedSize : is the size of the destination buffer, which must be already allocated.
-    return : the number of bytes decompressed into the destination buffer (necessarily <= maxDecompressedSize)
-             If the destination buffer is not large enough, decoding will stop and output an error code (<0).
+/*! LZ4_compress_default() :
+    Compresses 'srcSize' bytes from buffer 'src'
+    into already allocated 'dst' buffer of size 'dstCapacity'.
+    Compression is guaranteed to succeed if 'dstCapacity' >= LZ4_compressBound(srcSize).
+    It also runs faster, so it's a recommended setting.
+    If the function cannot compress 'src' into a more limited 'dst' budget,
+    compression stops *immediately*, and the function result is zero.
+    Note : as a consequence, 'dst' content is not valid.
+    Note 2 : This function is protected against buffer overflow scenarios (never writes outside 'dst' buffer, nor read outside 'source' buffer).
+        srcSize : max supported value is LZ4_MAX_INPUT_SIZE.
+        dstCapacity : size of buffer 'dst' (which must be already allocated)
+        return  : the number of bytes written into buffer 'dst' (necessarily <= dstCapacity)
+                  or 0 if compression fails */
+LZ4LIB_API int LZ4_compress_default(const char* src, char* dst, int srcSize, int dstCapacity);
+
+/*! LZ4_decompress_safe() :
+    compressedSize : is the exact complete size of the compressed block.
+    dstCapacity : is the size of destination buffer, which must be already allocated.
+    return : the number of bytes decompressed into destination buffer (necessarily <= dstCapacity)
+             If destination buffer is not large enough, decoding will stop and output an error code (negative value).
              If the source stream is detected malformed, the function will stop decoding and return a negative result.
-             This function is protected against buffer overflow exploits,
-             and never writes outside of output buffer, nor reads outside of input buffer.
-             It is also protected against malicious data packets.
+             This function is protected against malicious data packets.
 */
+LZ4LIB_API int LZ4_decompress_safe (const char* src, char* dst, int compressedSize, int dstCapacity);
 
 
-/**************************************
-   Advanced Functions
+/*-************************************
+*  Advanced Functions
 **************************************/
 #define LZ4_MAX_INPUT_SIZE        0x7E000000   /* 2 113 929 216 bytes */
-#define LZ4_COMPRESSBOUND(isize)  ((unsigned int)(isize) > (unsigned int)LZ4_MAX_INPUT_SIZE ? 0 : (isize) + ((isize)/255) + 16)
+#define LZ4_COMPRESSBOUND(isize)  ((unsigned)(isize) > (unsigned)LZ4_MAX_INPUT_SIZE ? 0 : (isize) + ((isize)/255) + 16)
 
-/*
+/*!
 LZ4_compressBound() :
     Provides the maximum size that LZ4 compression may output in a "worst case" scenario (input data not compressible)
-    This function is primarily useful for memory allocation purposes (output buffer size).
+    This function is primarily useful for memory allocation purposes (destination buffer size).
     Macro LZ4_COMPRESSBOUND() is also provided for compilation-time evaluation (stack memory allocation for example).
-
-    isize  : is the input size. Max supported value is LZ4_MAX_INPUT_SIZE
-    return : maximum output size in a "worst case" scenario
-             or 0, if input size is too large ( > LZ4_MAX_INPUT_SIZE)
+    Note that LZ4_compress_default() compresses faster when dstCapacity is >= LZ4_compressBound(srcSize)
+        inputSize  : max supported value is LZ4_MAX_INPUT_SIZE
+        return : maximum output size in a "worst case" scenario
+              or 0, if input size is incorrect (too large or negative)
 */
-int LZ4_compressBound(int isize);
-
-
-/*
-LZ4_compress_limitedOutput() :
-    Compress 'sourceSize' bytes from 'source' into an output buffer 'dest' of maximum size 'maxOutputSize'.
-    If it cannot achieve it, compression will stop, and result of the function will be zero.
-    This saves time and memory on detecting non-compressible (or barely compressible) data.
-    This function never writes outside of provided output buffer.
-
-    sourceSize  : Max supported value is LZ4_MAX_INPUT_VALUE
-    maxOutputSize : is the size of the destination buffer (which must be already allocated)
-    return : the number of bytes written in buffer 'dest'
-             or 0 if compression fails
+LZ4LIB_API int LZ4_compressBound(int inputSize);
+
+/*!
+LZ4_compress_fast() :
+    Same as LZ4_compress_default(), but allows selection of "acceleration" factor.
+    The larger the acceleration value, the faster the algorithm, but also the lesser the compression.
+    It's a trade-off. It can be fine tuned, with each successive value providing roughly +~3% to speed.
+    An acceleration value of "1" is the same as regular LZ4_compress_default()
+    Values <= 0 will be replaced by ACCELERATION_DEFAULT (currently == 1, see lz4.c).
 */
-int LZ4_compress_limitedOutput (const char* source, char* dest, int sourceSize, int maxOutputSize);
+LZ4LIB_API int LZ4_compress_fast (const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
 
 
-/*
-LZ4_compress_withState() :
-    Same compression functions, but using an externally allocated memory space to store compression state.
+/*!
+LZ4_compress_fast_extState() :
+    Same compression function, just using an externally allocated memory space to store compression state.
     Use LZ4_sizeofState() to know how much memory must be allocated,
-    and then, provide it as 'void* state' to compression functions.
+    and allocate it on 8-bytes boundaries (using malloc() typically).
+    Then, provide it as 'void* state' to compression function.
 */
-int LZ4_sizeofState(void);
-int LZ4_compress_withState               (void* state, const char* source, char* dest, int inputSize);
-int LZ4_compress_limitedOutput_withState (void* state, const char* source, char* dest, int inputSize, int maxOutputSize);
-
-
-/*
-LZ4_decompress_fast() :
-    originalSize : is the original and therefore uncompressed size
-    return : the number of bytes read from the source buffer (in other words, the compressed size)
-             If the source stream is detected malformed, the function will stop decoding and return a negative result.
-             Destination buffer must be already allocated. Its size must be a minimum of 'originalSize' bytes.
-    note : This function fully respect memory boundaries for properly formed compressed data.
-           It is a bit faster than LZ4_decompress_safe().
-           However, it does not provide any protection against intentionally modified data stream (malicious input).
-           Use this function in trusted environment only (data to decode comes from a trusted source).
+LZ4LIB_API int LZ4_sizeofState(void);
+LZ4LIB_API int LZ4_compress_fast_extState (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+
+/*!
+LZ4_compress_destSize() :
+    Reverse the logic : compresses as much data as possible from 'src' buffer
+    into already allocated buffer 'dst' of size 'targetDestSize'.
+    This function either compresses the entire 'src' content into 'dst' if it's large enough,
+    or fill 'dst' buffer completely with as much data as possible from 'src'.
+        *srcSizePtr : will be modified to indicate how many bytes where read from 'src' to fill 'dst'.
+                      New value is necessarily <= old value.
+        return : Nb bytes written into 'dst' (necessarily <= targetDestSize)
+                 or 0 if compression fails
 */
-int LZ4_decompress_fast (const char* source, char* dest, int originalSize);
-
+LZ4LIB_API int LZ4_compress_destSize (const char* src, char* dst, int* srcSizePtr, int targetDstSize);
+
+
+/*!
+LZ4_decompress_fast() : **unsafe!**
+This function is a bit faster than LZ4_decompress_safe(),
+but it may misbehave on malformed input because it doesn't perform full validation of compressed data.
+    originalSize : is the uncompressed size to regenerate
+                   Destination buffer must be already allocated, and its size must be >= 'originalSize' bytes.
+    return : number of bytes read from source buffer (== compressed size).
+             If the source stream is detected malformed, the function stops decoding and return a negative result.
+    note : This function is only usable if the originalSize of uncompressed data is known in advance.
+           The caller should also check that all the compressed input has been consumed properly,
+           i.e. that the return value matches the size of the buffer with compressed input.
+           The function never writes past the output buffer.  However, since it doesn't know its 'src' size,
+           it may read past the intended input.  Also, because match offsets are not validated during decoding,
+           reads from 'src' may underflow.  Use this function in trusted environment **only**.
+*/
+LZ4LIB_API int LZ4_decompress_fast (const char* src, char* dst, int originalSize);
 
-/*
+/*!
 LZ4_decompress_safe_partial() :
-    This function decompress a compressed block of size 'compressedSize' at position 'source'
-    into destination buffer 'dest' of size 'maxDecompressedSize'.
-    The function tries to stop decompressing operation as soon as 'targetOutputSize' has been reached,
-    reducing decompression time.
-    return : the number of bytes decoded in the destination buffer (necessarily <= maxDecompressedSize)
-       Note : this number can be < 'targetOutputSize' should the compressed block to decode be smaller.
-             Always control how many bytes were decoded.
-             If the source stream is detected malformed, the function will stop decoding and return a negative result.
-             This function never writes outside of output buffer, and never reads outside of input buffer. It is therefore protected against malicious data packets
+    This function decompress a compressed block of size 'srcSize' at position 'src'
+    into destination buffer 'dst' of size 'dstCapacity'.
+    The function will decompress a minimum of 'targetOutputSize' bytes, and stop after that.
+    However, it's not accurate, and may write more than 'targetOutputSize' (but always <= dstCapacity).
+   @return : the number of bytes decoded in the destination buffer (necessarily <= dstCapacity)
+        Note : this number can also be < targetOutputSize, if compressed block contains less data.
+            Therefore, always control how many bytes were decoded.
+            If source stream is detected malformed, function returns a negative result.
+            This function is protected against malicious data packets.
 */
-int LZ4_decompress_safe_partial (const char* source, char* dest, int compressedSize, int targetOutputSize, int maxDecompressedSize);
+LZ4LIB_API int LZ4_decompress_safe_partial (const char* src, char* dst, int srcSize, int targetOutputSize, int dstCapacity);
 
 
-/***********************************************
-   Streaming Compression Functions
+/*-*********************************************
+*  Streaming Compression Functions
 ***********************************************/
+typedef union LZ4_stream_u LZ4_stream_t;  /* incomplete type (defined later) */
 
-#define LZ4_STREAMSIZE_U64 ((1 << (LZ4_MEMORY_USAGE-3)) + 4)
-#define LZ4_STREAMSIZE     (LZ4_STREAMSIZE_U64 * sizeof(long long))
-/*
- * LZ4_stream_t
- * information structure to track an LZ4 stream.
- * important : init this structure content before first use !
- * note : only allocated directly the structure if you are statically linking LZ4
- *        If you are using liblz4 as a DLL, please use below construction methods instead.
+/*! LZ4_createStream() and LZ4_freeStream() :
+ *  LZ4_createStream() will allocate and initialize an `LZ4_stream_t` structure.
+ *  LZ4_freeStream() releases its memory.
  */
-typedef struct { long long table[LZ4_STREAMSIZE_U64]; } LZ4_stream_t;
+LZ4LIB_API LZ4_stream_t* LZ4_createStream(void);
+LZ4LIB_API int           LZ4_freeStream (LZ4_stream_t* streamPtr);
 
-/*
- * LZ4_resetStream
- * Use this function to init an allocated LZ4_stream_t structure
+/*! LZ4_resetStream() :
+ *  An LZ4_stream_t structure can be allocated once and re-used multiple times.
+ *  Use this function to start compressing a new stream.
  */
-void LZ4_resetStream (LZ4_stream_t* LZ4_streamPtr);
+LZ4LIB_API void LZ4_resetStream (LZ4_stream_t* streamPtr);
 
-/*
- * LZ4_createStream will allocate and initialize an LZ4_stream_t structure
- * LZ4_freeStream releases its memory.
- * In the context of a DLL (liblz4), please use these methods rather than the static struct.
- * They are more future proof, in case of a change of LZ4_stream_t size.
+/*! LZ4_loadDict() :
+ *  Use this function to load a static dictionary into LZ4_stream_t.
+ *  Any previous data will be forgotten, only 'dictionary' will remain in memory.
+ *  Loading a size of 0 is allowed, and is the same as reset.
+ * @return : dictionary size, in bytes (necessarily <= 64 KB)
  */
-LZ4_stream_t* LZ4_createStream(void);
-int           LZ4_freeStream (LZ4_stream_t* LZ4_streamPtr);
+LZ4LIB_API int LZ4_loadDict (LZ4_stream_t* streamPtr, const char* dictionary, int dictSize);
 
-/*
- * LZ4_loadDict
- * Use this function to load a static dictionary into LZ4_stream.
- * Any previous data will be forgotten, only 'dictionary' will remain in memory.
- * Loading a size of 0 is allowed.
- * Return : dictionary size, in bytes (necessarily <= 64 KB)
+/*! LZ4_compress_fast_continue() :
+ *  Compress 'src' content using data from previously compressed blocks, for better compression ratio.
+ *  'dst' buffer must be already allocated.
+ *  If dstCapacity >= LZ4_compressBound(srcSize), compression is guaranteed to succeed, and runs faster.
+ *
+ *  Important : The previous 64KB of compressed data is assumed to remain present and unmodified in memory!
+ *
+ *  Special 1 : When input is a double-buffer, they can have any size, including < 64 KB.
+ *              Make sure that buffers are separated by at least one byte.
+ *              This way, each block only depends on previous block.
+ *  Special 2 : If input buffer is a ring-buffer, it can have any size, including < 64 KB.
+ *
+ * @return : size of compressed block
+ *           or 0 if there is an error (typically, cannot fit into 'dst').
+ *  After an error, the stream status is invalid, it can only be reset or freed.
  */
-int LZ4_loadDict (LZ4_stream_t* LZ4_streamPtr, const char* dictionary, int dictSize);
-
-/*
- * LZ4_compress_continue
- * Compress data block 'source', using blocks compressed before as dictionary to improve compression ratio
- * Previous data blocks are assumed to still be present at their previous location.
+LZ4LIB_API int LZ4_compress_fast_continue (LZ4_stream_t* streamPtr, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+/*! LZ4_saveDict() :
+ *  If last 64KB data cannot be guaranteed to remain available at its current memory location,
+ *  save it into a safer place (char* safeBuffer).
+ *  This is schematically equivalent to a memcpy() followed by LZ4_loadDict(),
+ *  but is much faster, because LZ4_saveDict() doesn't need to rebuild tables.
+ * @return : saved dictionary size in bytes (necessarily <= maxDictSize), or 0 if error.
  */
-int LZ4_compress_continue (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize);
+LZ4LIB_API int LZ4_saveDict (LZ4_stream_t* streamPtr, char* safeBuffer, int maxDictSize);
 
-/*
- * LZ4_compress_limitedOutput_continue
- * Same as before, but also specify a maximum target compressed size (maxOutputSize)
- * If objective cannot be met, compression exits, and returns a zero.
+
+/*-**********************************************
+*  Streaming Decompression Functions
+*  Bufferless synchronous API
+************************************************/
+typedef union LZ4_streamDecode_u LZ4_streamDecode_t;   /* tracking context */
+
+/*! LZ4_createStreamDecode() and LZ4_freeStreamDecode() :
+ *  creation / destruction of streaming decompression tracking context.
+ *  A tracking context can be re-used multiple times.
+ */
+LZ4LIB_API LZ4_streamDecode_t* LZ4_createStreamDecode(void);
+LZ4LIB_API int                 LZ4_freeStreamDecode (LZ4_streamDecode_t* LZ4_stream);
+
+/*! LZ4_setStreamDecode() :
+ *  An LZ4_streamDecode_t context can be allocated once and re-used multiple times.
+ *  Use this function to start decompression of a new stream of blocks.
+ *  A dictionary can optionnally be set. Use NULL or size 0 for a reset order.
+ *  Dictionary is presumed stable : it must remain accessible and unmodified during next decompression.
+ * @return : 1 if OK, 0 if error
  */
-int LZ4_compress_limitedOutput_continue (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize, int maxOutputSize);
+LZ4LIB_API int LZ4_setStreamDecode (LZ4_streamDecode_t* LZ4_streamDecode, const char* dictionary, int dictSize);
+
+/*! LZ4_decoderRingBufferSize() : v1.8.2
+ *  Note : in a ring buffer scenario (optional),
+ *  blocks are presumed decompressed next to each other
+ *  up to the moment there is not enough remaining space for next block (remainingSize < maxBlockSize),
+ *  at which stage it resumes from beginning of ring buffer.
+ *  When setting such a ring buffer for streaming decompression,
+ *  provides the minimum size of this ring buffer
+ *  to be compatible with any source respecting maxBlockSize condition.
+ * @return : minimum ring buffer size,
+ *           or 0 if there is an error (invalid maxBlockSize).
+ */
+LZ4LIB_API int LZ4_decoderRingBufferSize(int maxBlockSize);
+#define LZ4_DECODER_RING_BUFFER_SIZE(mbs) (65536 + 14 + (mbs))  /* for static allocation; mbs presumed valid */
+
+/*! LZ4_decompress_*_continue() :
+ *  These decoding functions allow decompression of consecutive blocks in "streaming" mode.
+ *  A block is an unsplittable entity, it must be presented entirely to a decompression function.
+ *  Decompression functions only accepts one block at a time.
+ *  The last 64KB of previously decoded data *must* remain available and unmodified at the memory position where they were decoded.
+ *  If less than 64KB of data has been decoded, all the data must be present.
+ *
+ *  Special : if decompression side sets a ring buffer, it must respect one of the following conditions :
+ *  - Decompression buffer size is _at least_ LZ4_decoderRingBufferSize(maxBlockSize).
+ *    maxBlockSize is the maximum size of any single block. It can have any value > 16 bytes.
+ *    In which case, encoding and decoding buffers do not need to be synchronized.
+ *    Actually, data can be produced by any source compliant with LZ4 format specification, and respecting maxBlockSize.
+ *  - Synchronized mode :
+ *    Decompression buffer size is _exactly_ the same as compression buffer size,
+ *    and follows exactly same update rule (block boundaries at same positions),
+ *    and decoding function is provided with exact decompressed size of each block (exception for last block of the stream),
+ *    _then_ decoding & encoding ring buffer can have any size, including small ones ( < 64 KB).
+ *  - Decompression buffer is larger than encoding buffer, by a minimum of maxBlockSize more bytes.
+ *    In which case, encoding and decoding buffers do not need to be synchronized,
+ *    and encoding ring buffer can have any size, including small ones ( < 64 KB).
+ *
+ *  Whenever these conditions are not possible,
+ *  save the last 64KB of decoded data into a safe buffer where it can't be modified during decompression,
+ *  then indicate where this data is saved using LZ4_setStreamDecode(), before decompressing next block.
+*/
+LZ4LIB_API int LZ4_decompress_safe_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int srcSize, int dstCapacity);
+LZ4LIB_API int LZ4_decompress_fast_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int originalSize);
 
-/*
- * LZ4_saveDict
- * If previously compressed data block is not guaranteed to remain available at its memory location
- * save it into a safer place (char* safeBuffer)
- * Note : you don't need to call LZ4_loadDict() afterwards,
- *        dictionary is immediately usable, you can therefore call again LZ4_compress_continue()
- * Return : dictionary size in bytes, or 0 if error
- * Note : any dictSize > 64 KB will be interpreted as 64KB.
+
+/*! LZ4_decompress_*_usingDict() :
+ *  These decoding functions work the same as
+ *  a combination of LZ4_setStreamDecode() followed by LZ4_decompress_*_continue()
+ *  They are stand-alone, and don't need an LZ4_streamDecode_t structure.
+ *  Dictionary is presumed stable : it must remain accessible and unmodified during next decompression.
  */
-int LZ4_saveDict (LZ4_stream_t* LZ4_streamPtr, char* safeBuffer, int dictSize);
+LZ4LIB_API int LZ4_decompress_safe_usingDict (const char* src, char* dst, int srcSize, int dstCapcity, const char* dictStart, int dictSize);
+LZ4LIB_API int LZ4_decompress_fast_usingDict (const char* src, char* dst, int originalSize, const char* dictStart, int dictSize);
 
 
-/************************************************
-   Streaming Decompression Functions
-************************************************/
+/*^**********************************************
+ * !!!!!!   STATIC LINKING ONLY   !!!!!!
+ ***********************************************/
 
-#define LZ4_STREAMDECODESIZE_U64  4
-#define LZ4_STREAMDECODESIZE     (LZ4_STREAMDECODESIZE_U64 * sizeof(unsigned long long))
-typedef struct { unsigned long long table[LZ4_STREAMDECODESIZE_U64]; } LZ4_streamDecode_t;
-/*
- * LZ4_streamDecode_t
- * information structure to track an LZ4 stream.
- * init this structure content using LZ4_setStreamDecode or memset() before first use !
+/*-************************************
+ *  Unstable declarations
+ **************************************
+ * Declarations in this section should be considered unstable.
+ * Use at your own peril, etc., etc.
+ * They may be removed in the future.
+ * Their signatures may change.
+ **************************************/
+
+#ifdef LZ4_STATIC_LINKING_ONLY
+
+/*! LZ4_resetStream_fast() :
+ *  Use this, like LZ4_resetStream(), to prepare a context for a new chain of
+ *  calls to a streaming API (e.g., LZ4_compress_fast_continue()).
+ *
+ *  Note:
+ *  Using this in advance of a non- streaming-compression function is redundant,
+ *  and potentially bad for performance, since they all perform their own custom
+ *  reset internally.
+ *
+ *  Differences from LZ4_resetStream():
+ *  When an LZ4_stream_t is known to be in a internally coherent state,
+ *  it can often be prepared for a new compression with almost no work, only
+ *  sometimes falling back to the full, expensive reset that is always required
+ *  when the stream is in an indeterminate state (i.e., the reset performed by
+ *  LZ4_resetStream()).
  *
- * In the context of a DLL (liblz4) please prefer usage of construction methods below.
- * They are more future proof, in case of a change of LZ4_streamDecode_t size in the future.
- * LZ4_createStreamDecode will allocate and initialize an LZ4_streamDecode_t structure
- * LZ4_freeStreamDecode releases its memory.
+ *  LZ4_streams are guaranteed to be in a valid state when:
+ *  - returned from LZ4_createStream()
+ *  - reset by LZ4_resetStream()
+ *  - memset(stream, 0, sizeof(LZ4_stream_t)), though this is discouraged
+ *  - the stream was in a valid state and was reset by LZ4_resetStream_fast()
+ *  - the stream was in a valid state and was then used in any compression call
+ *    that returned success
+ *  - the stream was in an indeterminate state and was used in a compression
+ *    call that fully reset the state (e.g., LZ4_compress_fast_extState()) and
+ *    that returned success
+ *
+ *  When a stream isn't known to be in a valid state, it is not safe to pass to
+ *  any fastReset or streaming function. It must first be cleansed by the full
+ *  LZ4_resetStream().
  */
-LZ4_streamDecode_t* LZ4_createStreamDecode(void);
-int                 LZ4_freeStreamDecode (LZ4_streamDecode_t* LZ4_stream);
+LZ4LIB_API void LZ4_resetStream_fast (LZ4_stream_t* streamPtr);
 
-/*
- * LZ4_setStreamDecode
- * Use this function to instruct where to find the dictionary.
- * Setting a size of 0 is allowed (same effect as reset).
- * Return : 1 if OK, 0 if error
+/*! LZ4_compress_fast_extState_fastReset() :
+ *  A variant of LZ4_compress_fast_extState().
+ *
+ *  Using this variant avoids an expensive initialization step. It is only safe
+ *  to call if the state buffer is known to be correctly initialized already
+ *  (see above comment on LZ4_resetStream_fast() for a definition of "correctly
+ *  initialized"). From a high level, the difference is that this function
+ *  initializes the provided state with a call to something like
+ *  LZ4_resetStream_fast() while LZ4_compress_fast_extState() starts with a
+ *  call to LZ4_resetStream().
  */
-int LZ4_setStreamDecode (LZ4_streamDecode_t* LZ4_streamDecode, const char* dictionary, int dictSize);
+LZ4LIB_API int LZ4_compress_fast_extState_fastReset (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
 
-/*
-*_continue() :
-    These decoding functions allow decompression of multiple blocks in "streaming" mode.
-    Previously decoded blocks *must* remain available at the memory position where they were decoded (up to 64 KB)
-    If this condition is not possible, save the relevant part of decoded data into a safe buffer,
-    and indicate where is its new address using LZ4_setStreamDecode()
-*/
-int LZ4_decompress_safe_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* source, char* dest, int compressedSize, int maxDecompressedSize);
-int LZ4_decompress_fast_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* source, char* dest, int originalSize);
+/*! LZ4_attach_dictionary() :
+ *  This is an experimental API that allows for the efficient use of a
+ *  static dictionary many times.
+ *
+ *  Rather than re-loading the dictionary buffer into a working context before
+ *  each compression, or copying a pre-loaded dictionary's LZ4_stream_t into a
+ *  working LZ4_stream_t, this function introduces a no-copy setup mechanism,
+ *  in which the working stream references the dictionary stream in-place.
+ *
+ *  Several assumptions are made about the state of the dictionary stream.
+ *  Currently, only streams which have been prepared by LZ4_loadDict() should
+ *  be expected to work.
+ *
+ *  Alternatively, the provided dictionary stream pointer may be NULL, in which
+ *  case any existing dictionary stream is unset.
+ *
+ *  If a dictionary is provided, it replaces any pre-existing stream history.
+ *  The dictionary contents are the only history that can be referenced and
+ *  logically immediately precede the data compressed in the first subsequent
+ *  compression call.
+ *
+ *  The dictionary will only remain attached to the working stream through the
+ *  first compression call, at the end of which it is cleared. The dictionary
+ *  stream (and source buffer) must remain in-place / accessible / unchanged
+ *  through the completion of the first compression call on the stream.
+ */
+LZ4LIB_API void LZ4_attach_dictionary(LZ4_stream_t *working_stream, const LZ4_stream_t *dictionary_stream);
+
+#endif
 
+/*-************************************
+ *  Private definitions
+ **************************************
+ * Do not use these definitions.
+ * They are exposed to allow static allocation of `LZ4_stream_t` and `LZ4_streamDecode_t`.
+ * Using these definitions will expose code to API and/or ABI break in future versions of the library.
+ **************************************/
+#define LZ4_HASHLOG   (LZ4_MEMORY_USAGE-2)
+#define LZ4_HASHTABLESIZE (1 << LZ4_MEMORY_USAGE)
+#define LZ4_HASH_SIZE_U32 (1 << LZ4_HASHLOG)       /* required as macro for static allocation */
+
+#if defined(__cplusplus) || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */)
+#include <stdint.h>
+
+typedef struct LZ4_stream_t_internal LZ4_stream_t_internal;
+struct LZ4_stream_t_internal {
+    uint32_t hashTable[LZ4_HASH_SIZE_U32];
+    uint32_t currentOffset;
+    uint16_t initCheck;
+    uint16_t tableType;
+    const uint8_t* dictionary;
+    const LZ4_stream_t_internal* dictCtx;
+    uint32_t dictSize;
+};
+
+typedef struct {
+    const uint8_t* externalDict;
+    size_t extDictSize;
+    const uint8_t* prefixEnd;
+    size_t prefixSize;
+} LZ4_streamDecode_t_internal;
+
+#else
+
+typedef struct LZ4_stream_t_internal LZ4_stream_t_internal;
+struct LZ4_stream_t_internal {
+    unsigned int hashTable[LZ4_HASH_SIZE_U32];
+    unsigned int currentOffset;
+    unsigned short initCheck;
+    unsigned short tableType;
+    const unsigned char* dictionary;
+    const LZ4_stream_t_internal* dictCtx;
+    unsigned int dictSize;
+};
+
+typedef struct {
+    const unsigned char* externalDict;
+    size_t extDictSize;
+    const unsigned char* prefixEnd;
+    size_t prefixSize;
+} LZ4_streamDecode_t_internal;
 
-/*
-Advanced decoding functions :
-*_usingDict() :
-    These decoding functions work the same as
-    a combination of LZ4_setDictDecode() followed by LZ4_decompress_x_continue()
-    They are stand-alone and don't use nor update an LZ4_streamDecode_t structure.
-*/
-int LZ4_decompress_safe_usingDict (const char* source, char* dest, int compressedSize, int maxDecompressedSize, const char* dictStart, int dictSize);
-int LZ4_decompress_fast_usingDict (const char* source, char* dest, int originalSize, const char* dictStart, int dictSize);
+#endif
 
+/*!
+ * LZ4_stream_t :
+ * information structure to track an LZ4 stream.
+ * init this structure before first use.
+ * note : only use in association with static linking !
+ *        this definition is not API/ABI safe,
+ *        it may change in a future version !
+ */
+#define LZ4_STREAMSIZE_U64 ((1 << (LZ4_MEMORY_USAGE-3)) + 4)
+#define LZ4_STREAMSIZE     (LZ4_STREAMSIZE_U64 * sizeof(unsigned long long))
+union LZ4_stream_u {
+    unsigned long long table[LZ4_STREAMSIZE_U64];
+    LZ4_stream_t_internal internal_donotuse;
+} ;  /* previously typedef'd to LZ4_stream_t */
+
+
+/*!
+ * LZ4_streamDecode_t :
+ * information structure to track an LZ4 stream during decompression.
+ * init this structure  using LZ4_setStreamDecode (or memset()) before first use
+ * note : only use in association with static linking !
+ *        this definition is not API/ABI safe,
+ *        and may change in a future version !
+ */
+#define LZ4_STREAMDECODESIZE_U64  4
+#define LZ4_STREAMDECODESIZE     (LZ4_STREAMDECODESIZE_U64 * sizeof(unsigned long long))
+union LZ4_streamDecode_u {
+    unsigned long long table[LZ4_STREAMDECODESIZE_U64];
+    LZ4_streamDecode_t_internal internal_donotuse;
+} ;   /* previously typedef'd to LZ4_streamDecode_t */
 
 
-/**************************************
-   Obsolete Functions
+/*-************************************
+*  Obsolete Functions
 **************************************/
-/*
-Obsolete decompression functions
-These function names are deprecated and should no longer be used.
-They are only provided here for compatibility with older user programs.
-- LZ4_uncompress is the same as LZ4_decompress_fast
-- LZ4_uncompress_unknownOutputSize is the same as LZ4_decompress_safe
-These function prototypes are now disabled; uncomment them if you really need them.
-It is highly recommended to stop using these functions and migrate to newer ones */
-/* int LZ4_uncompress (const char* source, char* dest, int outputSize); */
-/* int LZ4_uncompress_unknownOutputSize (const char* source, char* dest, int isize, int maxOutputSize); */
-
-
-/* Obsolete streaming functions; use new streaming interface whenever possible */
-void* LZ4_create (const char* inputBuffer);
-int   LZ4_sizeofStreamState(void);
-int   LZ4_resetStreamState(void* state, const char* inputBuffer);
-char* LZ4_slideInputBuffer (void* state);
+
+/*! Deprecation warnings
+   Should deprecation warnings be a problem,
+   it is generally possible to disable them,
+   typically with -Wno-deprecated-declarations for gcc
+   or _CRT_SECURE_NO_WARNINGS in Visual.
+   Otherwise, it's also possible to define LZ4_DISABLE_DEPRECATE_WARNINGS */
+#ifdef LZ4_DISABLE_DEPRECATE_WARNINGS
+#  define LZ4_DEPRECATED(message)   /* disable deprecation warnings */
+#else
+#  define LZ4_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__)
+#  if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */
+#    define LZ4_DEPRECATED(message) [[deprecated(message)]]
+#  elif (LZ4_GCC_VERSION >= 405) || defined(__clang__)
+#    define LZ4_DEPRECATED(message) __attribute__((deprecated(message)))
+#  elif (LZ4_GCC_VERSION >= 301)
+#    define LZ4_DEPRECATED(message) __attribute__((deprecated))
+#  elif defined(_MSC_VER)
+#    define LZ4_DEPRECATED(message) __declspec(deprecated(message))
+#  else
+#    pragma message("WARNING: You need to implement LZ4_DEPRECATED for this compiler")
+#    define LZ4_DEPRECATED(message)
+#  endif
+#endif /* LZ4_DISABLE_DEPRECATE_WARNINGS */
+
+/* Obsolete compression functions */
+LZ4_DEPRECATED("use LZ4_compress_default() instead") LZ4LIB_API int LZ4_compress               (const char* source, char* dest, int sourceSize);
+LZ4_DEPRECATED("use LZ4_compress_default() instead") LZ4LIB_API int LZ4_compress_limitedOutput (const char* source, char* dest, int sourceSize, int maxOutputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_withState               (void* state, const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_limitedOutput_withState (void* state, const char* source, char* dest, int inputSize, int maxOutputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_continue                (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_limitedOutput_continue  (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize, int maxOutputSize);
+
+/* Obsolete decompression functions */
+LZ4_DEPRECATED("use LZ4_decompress_fast() instead") LZ4LIB_API int LZ4_uncompress (const char* source, char* dest, int outputSize);
+LZ4_DEPRECATED("use LZ4_decompress_safe() instead") LZ4LIB_API int LZ4_uncompress_unknownOutputSize (const char* source, char* dest, int isize, int maxOutputSize);
+
+/* Obsolete streaming functions; degraded functionality; do not use!
+ *
+ * In order to perform streaming compression, these functions depended on data
+ * that is no longer tracked in the state. They have been preserved as well as
+ * possible: using them will still produce a correct output. However, they don't
+ * actually retain any history between compression calls. The compression ratio
+ * achieved will therefore be no better than compressing each chunk
+ * independently.
+ */
+LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API void* LZ4_create (char* inputBuffer);
+LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API int   LZ4_sizeofStreamState(void);
+LZ4_DEPRECATED("Use LZ4_resetStream() instead") LZ4LIB_API  int   LZ4_resetStreamState(void* state, char* inputBuffer);
+LZ4_DEPRECATED("Use LZ4_saveDict() instead") LZ4LIB_API     char* LZ4_slideInputBuffer (void* state);
 
 /* Obsolete streaming decoding functions */
-int LZ4_decompress_safe_withPrefix64k (const char* source, char* dest, int compressedSize, int maxOutputSize);
-int LZ4_decompress_fast_withPrefix64k (const char* source, char* dest, int originalSize);
+LZ4_DEPRECATED("use LZ4_decompress_safe_usingDict() instead") LZ4LIB_API int LZ4_decompress_safe_withPrefix64k (const char* src, char* dst, int compressedSize, int maxDstSize);
+LZ4_DEPRECATED("use LZ4_decompress_fast_usingDict() instead") LZ4LIB_API int LZ4_decompress_fast_withPrefix64k (const char* src, char* dst, int originalSize);
+
+#endif /* LZ4_H_2983827168210 */
 
 
 #if defined (__cplusplus)