rroonga 7.1.1-x64-mingw32 → 9.0.2-x64-mingw32

data/vendor/local/share/man/man1/lz4cat.1

@@ -1,32 +1,223 @@
-\"
-\" lz4cat.1: This is a manual page for 'lz4cat' program. This file is part of
-\" the lz4 <https://code.google.com/p/lz4/> project.
-\"
+.
+.TH "LZ4" "1" "2018-01-13" "lz4 1.8.1" "User Commands"
+.
+.SH "NAME"
+\fBlz4\fR \- lz4, unlz4, lz4cat \- Compress or decompress \.lz4 files
+.
+.SH "SYNOPSIS"
+\fBlz4\fR [\fIOPTIONS\fR] [\-|INPUT\-FILE] \fIOUTPUT\-FILE\fR
+.
+.P
+\fBunlz4\fR is equivalent to \fBlz4 \-d\fR
+.
+.P
+\fBlz4cat\fR is equivalent to \fBlz4 \-dcfm\fR
+.
+.P
+When writing scripts that need to decompress files, it is recommended to always use the name \fBlz4\fR with appropriate arguments (\fBlz4 \-d\fR or \fBlz4 \-dc\fR) instead of the names \fBunlz4\fR and \fBlz4cat\fR\.
+.
+.SH "DESCRIPTION"
+\fBlz4\fR is an extremely fast lossless compression algorithm, based on \fBbyte\-aligned LZ77\fR family of compression scheme\. \fBlz4\fR offers compression speeds of 400 MB/s per core, linearly scalable with multi\-core CPUs\. It features an extremely fast decoder, with speed in multiple GB/s per core, typically reaching RAM speed limit on multi\-core systems\. The native file format is the \fB\.lz4\fR format\.
+.
+.SS "Difference between lz4 and gzip"
+\fBlz4\fR supports a command line syntax similar \fIbut not identical\fR to \fBgzip(1)\fR\. Differences are :
+.
+.IP "\(bu" 4
+\fBlz4\fR preserves original files
+.
+.IP "\(bu" 4
+\fBlz4\fR compresses a single file by default (see \fB\-m\fR for multiple files)
+.
+.IP "\(bu" 4
+\fBlz4 file1 file2\fR means : compress file1 \fIinto\fR file2
+.
+.IP "\(bu" 4
+\fBlz4 file\.lz4\fR will default to decompression (use \fB\-z\fR to force compression)
+.
+.IP "\(bu" 4
+\fBlz4\fR shows real\-time notification statistics during compression or decompression of a single file (use \fB\-q\fR to silence them)
+.
+.IP "\(bu" 4
+If no destination name is provided, result is sent to \fBstdout\fR \fIexcept if stdout is the console\fR\.
+.
+.IP "\(bu" 4
+If no destination name is provided, \fBand\fR if \fBstdout\fR is the console, \fBfile\fR is compressed into \fBfile\.lz4\fR\.
+.
+.IP "\(bu" 4
+As a consequence of previous rules, note the following example : \fBlz4 file | consumer\fR sends compressed data to \fBconsumer\fR through \fBstdout\fR, hence it does \fInot\fR create \fBfile\.lz4\fR\.
+.
+.IP "\(bu" 4
+Another consequence of those rules is that to run \fBlz4\fR under \fBnohup\fR, you should provide a destination file: \fBnohup lz4 file file\.lz4\fR, because \fBnohup\fR writes the specified command\'s output to a file\.
+.
+.IP "" 0
+.
+.P
+Default behaviors can be modified by opt\-in commands, detailed below\.
+.
+.IP "\(bu" 4
+\fBlz4 \-m\fR makes it possible to provide multiple input filenames, which will be compressed into files using suffix \fB\.lz4\fR\. Progress notifications are also disabled by default (use \fB\-v\fR to enable them)\. This mode has a behavior which more closely mimics \fBgzip\fR command line, with the main remaining difference being that source files are preserved by default\.
+.
+.IP "\(bu" 4
+Similarly, \fBlz4 \-m \-d\fR can decompress multiple \fB*\.lz4\fR files\.
+.
+.IP "\(bu" 4
+It\'s possible to opt\-in to erase source files on successful compression or decompression, using \fB\-\-rm\fR command\.
+.
+.IP "\(bu" 4
+Consequently, \fBlz4 \-m \-\-rm\fR behaves the same as \fBgzip\fR\.
+.
+.IP "" 0
+.
+.SS "Concatenation of \.lz4 files"
+It is possible to concatenate \fB\.lz4\fR files as is\. \fBlz4\fR will decompress such files as if they were a single \fB\.lz4\fR file\. For example:
+.
+.IP "" 4
+.
+.nf
 
-\" No hyphenation
-.hy 0
-.nr HY 0
-
-.TH lz4cat "1" "2014-06-20" "lz4cat" "User Commands"
-.SH NAME
-\fBlz4cat\fR - Utility based on LZ4
-
-.SH SYNOPSIS
-.TP 5
-\fBlz4cat\fR [\fBOPTIONS\fR] [-|INPUT-FILE]
-
-.SH DESCRIPTION
-.PP
-\fBlz4cat\fR is an utility based on \fBlz4\fR, an extremely fast lossless compression algorithm.
-
-\fBlz4cat\fR decompress input file or stream, redirecting its output to the console.
-It is equivalent to \fBlz4 -cd\fR,
-
-Available options are the same as \fBlz4\fR ones (man lz4).
-
-
-.SH BUGS
-Report bugs at:- https://code.google.com/p/lz4/
-
-.SH AUTHOR
+lz4 file1  > foo\.lz4
+lz4 file2 >> foo\.lz4
+.
+.fi
+.
+.IP "" 0
+.
+.P
+Then \fBlz4cat foo\.lz4\fR is equivalent to \fBcat file1 file2\fR\.
+.
+.SH "OPTIONS"
+.
+.SS "Short commands concatenation"
+In some cases, some options can be expressed using short command \fB\-x\fR or long command \fB\-\-long\-word\fR\. Short commands can be concatenated together\. For example, \fB\-d \-c\fR is equivalent to \fB\-dc\fR\. Long commands cannot be concatenated\. They must be clearly separated by a space\.
+.
+.SS "Multiple commands"
+When multiple contradictory commands are issued on a same command line, only the latest one will be applied\.
+.
+.SS "Operation mode"
+.
+.TP
+\fB\-z\fR \fB\-\-compress\fR
+Compress\. This is the default operation mode when no operation mode option is specified, no other operation mode is implied from the command name (for example, \fBunlz4\fR implies \fB\-\-decompress\fR), nor from the input file name (for example, a file extension \fB\.lz4\fR implies \fB\-\-decompress\fR by default)\. \fB\-z\fR can also be used to force compression of an already compressed \fB\.lz4\fR file\.
+.
+.TP
+\fB\-d\fR \fB\-\-decompress\fR \fB\-\-uncompress\fR
+Decompress\. \fB\-\-decompress\fR is also the default operation when the input filename has an \fB\.lz4\fR extension\.
+.
+.TP
+\fB\-t\fR \fB\-\-test\fR
+Test the integrity of compressed \fB\.lz4\fR files\. The decompressed data is discarded\. No files are created nor removed\.
+.
+.TP
+\fB\-b#\fR
+Benchmark mode, using \fB#\fR compression level\.
+.
+.SS "Operation modifiers"
+.
+.TP
+\fB\-#\fR
+Compression level, with # being any value from 1 to 16\. Higher values trade compression speed for compression ratio\. Values above 16 are considered the same as 16\. Recommended values are 1 for fast compression (default), and 9 for high compression\. Speed/compression trade\-off will vary depending on data to compress\. Decompression speed remains fast at all settings\.
+.
+.TP
+\fB\-f\fR \fB\-\-[no\-]force\fR
+This option has several effects:
+.
+.IP
+If the target file already exists, overwrite it without prompting\.
+.
+.IP
+When used with \fB\-\-decompress\fR and \fBlz4\fR cannot recognize the type of the source file, copy the source file as is to standard output\. This allows \fBlz4cat \-\-force\fR to be used like \fBcat (1)\fR for files that have not been compressed with \fBlz4\fR\.
+.
+.TP
+\fB\-c\fR \fB\-\-stdout\fR \fB\-\-to\-stdout\fR
+Force write to standard output, even if it is the console\.
+.
+.TP
+\fB\-m\fR \fB\-\-multiple\fR
+Multiple input files\. Compressed file names will be appended a \fB\.lz4\fR suffix\. This mode also reduces notification level\. \fBlz4 \-m\fR has a behavior equivalent to \fBgzip \-k\fR (it preserves source files by default)\.
+.
+.TP
+\fB\-r\fR
+operate recursively on directories\. This mode also sets \fB\-m\fR (multiple input files)\.
+.
+.TP
+\fB\-B#\fR
+Block size [4\-7](default : 7)
+.
+.br
+\fB\-B4\fR= 64KB ; \fB\-B5\fR= 256KB ; \fB\-B6\fR= 1MB ; \fB\-B7\fR= 4MB
+.
+.TP
+\fB\-BD\fR
+Block Dependency (improves compression ratio on small blocks)
+.
+.TP
+\fB\-\-[no\-]frame\-crc\fR
+Select frame checksum (default:enabled)
+.
+.TP
+\fB\-\-[no\-]content\-size\fR
+Header includes original size (default:not present)
+.
+.br
+Note : this option can only be activated when the original size can be determined, hence for a file\. It won\'t work with unknown source size, such as stdin or pipe\.
+.
+.TP
+\fB\-\-[no\-]sparse\fR
+Sparse mode support (default:enabled on file, disabled on stdout)
+.
+.TP
+\fB\-l\fR
+Use Legacy format (typically for Linux Kernel compression)
+.
+.br
+Note : \fB\-l\fR is not compatible with \fB\-m\fR (\fB\-\-multiple\fR) nor \fB\-r\fR
+.
+.SS "Other options"
+.
+.TP
+\fB\-v\fR \fB\-\-verbose\fR
+Verbose mode
+.
+.TP
+\fB\-q\fR \fB\-\-quiet\fR
+Suppress warnings and real\-time statistics; specify twice to suppress errors too
+.
+.TP
+\fB\-h\fR \fB\-H\fR \fB\-\-help\fR
+Display help/long help and exit
+.
+.TP
+\fB\-V\fR \fB\-\-version\fR
+Display Version number and exit
+.
+.TP
+\fB\-k\fR \fB\-\-keep\fR
+Preserve source files (default behavior)
+.
+.TP
+\fB\-\-rm\fR
+Delete source files on successful compression or decompression
+.
+.TP
+\fB\-\-\fR
+Treat all subsequent arguments as files
+.
+.SS "Benchmark mode"
+.
+.TP
+\fB\-b#\fR
+Benchmark file(s), using # compression level
+.
+.TP
+\fB\-e#\fR
+Benchmark multiple compression levels, from b# to e# (included)
+.
+.TP
+\fB\-i#\fR
+Minimum evaluation in seconds [1\-9] (default : 3)
+.
+.SH "BUGS"
+Report bugs at: https://github\.com/lz4/lz4/issues
+.
+.SH "AUTHOR"
 Yann Collet

data/vendor/local/share/man/man1/unlz4.1

@@ -0,0 +1,223 @@
+.
+.TH "LZ4" "1" "2018-01-13" "lz4 1.8.1" "User Commands"
+.
+.SH "NAME"
+\fBlz4\fR \- lz4, unlz4, lz4cat \- Compress or decompress \.lz4 files
+.
+.SH "SYNOPSIS"
+\fBlz4\fR [\fIOPTIONS\fR] [\-|INPUT\-FILE] \fIOUTPUT\-FILE\fR
+.
+.P
+\fBunlz4\fR is equivalent to \fBlz4 \-d\fR
+.
+.P
+\fBlz4cat\fR is equivalent to \fBlz4 \-dcfm\fR
+.
+.P
+When writing scripts that need to decompress files, it is recommended to always use the name \fBlz4\fR with appropriate arguments (\fBlz4 \-d\fR or \fBlz4 \-dc\fR) instead of the names \fBunlz4\fR and \fBlz4cat\fR\.
+.
+.SH "DESCRIPTION"
+\fBlz4\fR is an extremely fast lossless compression algorithm, based on \fBbyte\-aligned LZ77\fR family of compression scheme\. \fBlz4\fR offers compression speeds of 400 MB/s per core, linearly scalable with multi\-core CPUs\. It features an extremely fast decoder, with speed in multiple GB/s per core, typically reaching RAM speed limit on multi\-core systems\. The native file format is the \fB\.lz4\fR format\.
+.
+.SS "Difference between lz4 and gzip"
+\fBlz4\fR supports a command line syntax similar \fIbut not identical\fR to \fBgzip(1)\fR\. Differences are :
+.
+.IP "\(bu" 4
+\fBlz4\fR preserves original files
+.
+.IP "\(bu" 4
+\fBlz4\fR compresses a single file by default (see \fB\-m\fR for multiple files)
+.
+.IP "\(bu" 4
+\fBlz4 file1 file2\fR means : compress file1 \fIinto\fR file2
+.
+.IP "\(bu" 4
+\fBlz4 file\.lz4\fR will default to decompression (use \fB\-z\fR to force compression)
+.
+.IP "\(bu" 4
+\fBlz4\fR shows real\-time notification statistics during compression or decompression of a single file (use \fB\-q\fR to silence them)
+.
+.IP "\(bu" 4
+If no destination name is provided, result is sent to \fBstdout\fR \fIexcept if stdout is the console\fR\.
+.
+.IP "\(bu" 4
+If no destination name is provided, \fBand\fR if \fBstdout\fR is the console, \fBfile\fR is compressed into \fBfile\.lz4\fR\.
+.
+.IP "\(bu" 4
+As a consequence of previous rules, note the following example : \fBlz4 file | consumer\fR sends compressed data to \fBconsumer\fR through \fBstdout\fR, hence it does \fInot\fR create \fBfile\.lz4\fR\.
+.
+.IP "\(bu" 4
+Another consequence of those rules is that to run \fBlz4\fR under \fBnohup\fR, you should provide a destination file: \fBnohup lz4 file file\.lz4\fR, because \fBnohup\fR writes the specified command\'s output to a file\.
+.
+.IP "" 0
+.
+.P
+Default behaviors can be modified by opt\-in commands, detailed below\.
+.
+.IP "\(bu" 4
+\fBlz4 \-m\fR makes it possible to provide multiple input filenames, which will be compressed into files using suffix \fB\.lz4\fR\. Progress notifications are also disabled by default (use \fB\-v\fR to enable them)\. This mode has a behavior which more closely mimics \fBgzip\fR command line, with the main remaining difference being that source files are preserved by default\.
+.
+.IP "\(bu" 4
+Similarly, \fBlz4 \-m \-d\fR can decompress multiple \fB*\.lz4\fR files\.
+.
+.IP "\(bu" 4
+It\'s possible to opt\-in to erase source files on successful compression or decompression, using \fB\-\-rm\fR command\.
+.
+.IP "\(bu" 4
+Consequently, \fBlz4 \-m \-\-rm\fR behaves the same as \fBgzip\fR\.
+.
+.IP "" 0
+.
+.SS "Concatenation of \.lz4 files"
+It is possible to concatenate \fB\.lz4\fR files as is\. \fBlz4\fR will decompress such files as if they were a single \fB\.lz4\fR file\. For example:
+.
+.IP "" 4
+.
+.nf
+
+lz4 file1  > foo\.lz4
+lz4 file2 >> foo\.lz4
+.
+.fi
+.
+.IP "" 0
+.
+.P
+Then \fBlz4cat foo\.lz4\fR is equivalent to \fBcat file1 file2\fR\.
+.
+.SH "OPTIONS"
+.
+.SS "Short commands concatenation"
+In some cases, some options can be expressed using short command \fB\-x\fR or long command \fB\-\-long\-word\fR\. Short commands can be concatenated together\. For example, \fB\-d \-c\fR is equivalent to \fB\-dc\fR\. Long commands cannot be concatenated\. They must be clearly separated by a space\.
+.
+.SS "Multiple commands"
+When multiple contradictory commands are issued on a same command line, only the latest one will be applied\.
+.
+.SS "Operation mode"
+.
+.TP
+\fB\-z\fR \fB\-\-compress\fR
+Compress\. This is the default operation mode when no operation mode option is specified, no other operation mode is implied from the command name (for example, \fBunlz4\fR implies \fB\-\-decompress\fR), nor from the input file name (for example, a file extension \fB\.lz4\fR implies \fB\-\-decompress\fR by default)\. \fB\-z\fR can also be used to force compression of an already compressed \fB\.lz4\fR file\.
+.
+.TP
+\fB\-d\fR \fB\-\-decompress\fR \fB\-\-uncompress\fR
+Decompress\. \fB\-\-decompress\fR is also the default operation when the input filename has an \fB\.lz4\fR extension\.
+.
+.TP
+\fB\-t\fR \fB\-\-test\fR
+Test the integrity of compressed \fB\.lz4\fR files\. The decompressed data is discarded\. No files are created nor removed\.
+.
+.TP
+\fB\-b#\fR
+Benchmark mode, using \fB#\fR compression level\.
+.
+.SS "Operation modifiers"
+.
+.TP
+\fB\-#\fR
+Compression level, with # being any value from 1 to 16\. Higher values trade compression speed for compression ratio\. Values above 16 are considered the same as 16\. Recommended values are 1 for fast compression (default), and 9 for high compression\. Speed/compression trade\-off will vary depending on data to compress\. Decompression speed remains fast at all settings\.
+.
+.TP
+\fB\-f\fR \fB\-\-[no\-]force\fR
+This option has several effects:
+.
+.IP
+If the target file already exists, overwrite it without prompting\.
+.
+.IP
+When used with \fB\-\-decompress\fR and \fBlz4\fR cannot recognize the type of the source file, copy the source file as is to standard output\. This allows \fBlz4cat \-\-force\fR to be used like \fBcat (1)\fR for files that have not been compressed with \fBlz4\fR\.
+.
+.TP
+\fB\-c\fR \fB\-\-stdout\fR \fB\-\-to\-stdout\fR
+Force write to standard output, even if it is the console\.
+.
+.TP
+\fB\-m\fR \fB\-\-multiple\fR
+Multiple input files\. Compressed file names will be appended a \fB\.lz4\fR suffix\. This mode also reduces notification level\. \fBlz4 \-m\fR has a behavior equivalent to \fBgzip \-k\fR (it preserves source files by default)\.
+.
+.TP
+\fB\-r\fR
+operate recursively on directories\. This mode also sets \fB\-m\fR (multiple input files)\.
+.
+.TP
+\fB\-B#\fR
+Block size [4\-7](default : 7)
+.
+.br
+\fB\-B4\fR= 64KB ; \fB\-B5\fR= 256KB ; \fB\-B6\fR= 1MB ; \fB\-B7\fR= 4MB
+.
+.TP
+\fB\-BD\fR
+Block Dependency (improves compression ratio on small blocks)
+.
+.TP
+\fB\-\-[no\-]frame\-crc\fR
+Select frame checksum (default:enabled)
+.
+.TP
+\fB\-\-[no\-]content\-size\fR
+Header includes original size (default:not present)
+.
+.br
+Note : this option can only be activated when the original size can be determined, hence for a file\. It won\'t work with unknown source size, such as stdin or pipe\.
+.
+.TP
+\fB\-\-[no\-]sparse\fR
+Sparse mode support (default:enabled on file, disabled on stdout)
+.
+.TP
+\fB\-l\fR
+Use Legacy format (typically for Linux Kernel compression)
+.
+.br
+Note : \fB\-l\fR is not compatible with \fB\-m\fR (\fB\-\-multiple\fR) nor \fB\-r\fR
+.
+.SS "Other options"
+.
+.TP
+\fB\-v\fR \fB\-\-verbose\fR
+Verbose mode
+.
+.TP
+\fB\-q\fR \fB\-\-quiet\fR
+Suppress warnings and real\-time statistics; specify twice to suppress errors too
+.
+.TP
+\fB\-h\fR \fB\-H\fR \fB\-\-help\fR
+Display help/long help and exit
+.
+.TP
+\fB\-V\fR \fB\-\-version\fR
+Display Version number and exit
+.
+.TP
+\fB\-k\fR \fB\-\-keep\fR
+Preserve source files (default behavior)
+.
+.TP
+\fB\-\-rm\fR
+Delete source files on successful compression or decompression
+.
+.TP
+\fB\-\-\fR
+Treat all subsequent arguments as files
+.
+.SS "Benchmark mode"
+.
+.TP
+\fB\-b#\fR
+Benchmark file(s), using # compression level
+.
+.TP
+\fB\-e#\fR
+Benchmark multiple compression levels, from b# to e# (included)
+.
+.TP
+\fB\-i#\fR
+Minimum evaluation in seconds [1\-9] (default : 3)
+.
+.SH "BUGS"
+Report bugs at: https://github\.com/lz4/lz4/issues
+.
+.SH "AUTHOR"
+Yann Collet