RubyGems - rroonga - Versions diffs - 7.1.1-x64-mingw32 → 9.0.2-x64-mingw32 - Mend

rroonga 7.1.1-x64-mingw32 → 9.0.2-x64-mingw32

Files changed (980) hide show

data/vendor/local/share/license/lz4/LICENSE CHANGED Viewed

@@ -1,5 +1,5 @@
 LZ4 Library
-Copyright (c) 2011-2014, Yann Collet
+Copyright (c) 2011-2016, Yann Collet
 All rights reserved.
 Redistribution and use in source and binary forms, with or without modification,
@@ -21,4 +21,4 @@ ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/vendor/local/share/license/mruby/AUTHORS CHANGED Viewed

@@ -35,3 +35,6 @@ Original Authors "mruby developers" are:
    Terence Lee
    Zachary Scott
    Tomasz Dąbrowski
+   Christopher Aue
+   Masahiro Wakame
+   YAMAMOTO Masaya

data/vendor/local/share/license/mruby/MITL CHANGED Viewed

@@ -1,4 +1,4 @@
-Copyright (c) 2017 mruby developers
+Copyright (c) 2018 mruby developers
 Permission is hereby granted, free of charge, to any person obtaining a
 copy of this software and associated documentation files (the "Software"),

data/vendor/local/share/license/mruby/README.md CHANGED Viewed

@@ -17,7 +17,7 @@ of the Ministry of Economy, Trade and Industry of Japan.
 ## How to get mruby
-The stable version 1.2.0 of mruby can be downloaded via the following URL: [https://github.com/mruby/mruby/archive/1.2.0.zip](https://github.com/mruby/mruby/archive/1.2.0.zip)
+The stable version 1.4.1 of mruby can be downloaded via the following URL: [https://github.com/mruby/mruby/archive/1.4.1.zip](https://github.com/mruby/mruby/archive/1.4.1.zip)
 The latest development version of mruby can be downloaded via the following URL: [https://github.com/mruby/mruby/zipball/master](https://github.com/mruby/mruby/zipball/master)

data/vendor/local/share/license/msgpack/README.md CHANGED Viewed

@@ -1,9 +1,9 @@
 `msgpack` for C/C++
 ===================
-Version 2.0.0 (under development)[![Build Status](https://travis-ci.org/msgpack/msgpack-c.svg?branch=master)](https://travis-ci.org/msgpack/msgpack-c) [![Build status](https://ci.appveyor.com/api/projects/status/8kstcgt79qj123mw/branch/master?svg=true)](https://ci.appveyor.com/project/redboltz/msgpack-c/branch/master)
+Version 3.0.1 [![Build Status](https://travis-ci.org/msgpack/msgpack-c.svg?branch=master)](https://travis-ci.org/msgpack/msgpack-c) [![Build status](https://ci.appveyor.com/api/projects/status/8kstcgt79qj123mw/branch/master?svg=true)](https://ci.appveyor.com/project/redboltz/msgpack-c/branch/master)
-It's like JSON but small and fast.
+It's like JSON but smaller and faster.
 Overview
 --------
@@ -11,7 +11,7 @@ Overview
 [MessagePack](http://msgpack.org/) is an efficient binary serialization
 format, which lets you exchange data among multiple languages like JSON,
 except that it's faster and smaller. Small integers are encoded into a
-single byte while typical short strings require only one extra byte in
+single byte and short strings require only one extra byte in
 addition to the strings themselves.
 Example
@@ -120,36 +120,7 @@ also install the C and C++ versions of msgpack.
 #### Install from git repository
-##### Using autotools
-You will need:
- - `gcc >= 4.1.0` or `clang >= 3.3.0`
- - `autoconf >= 2.60`
- - `automake >= 1.10`
- - `libtool >= 2.2.4`
-The build steps below are for C and C++03. If compiling for C++11,
-add `-std=c++11` to the environmental variable `CXXFLAGS` with
-`export CXXFLAGS="$CXXFLAGS -std=c++11"` prior to following the
-directions below.
-```bash
-$ git clone https://github.com/msgpack/msgpack-c
-$ cd msgpack-c
-$ ./bootstrap
-$ ./configure
-$ make
-```
-You can install the resulting library like this:
-```bash
-$ sudo make install
-```
-##### Using cmake
-###### Using the Terminal (CLI)
+##### Using the Terminal (CLI)
 You will need:
@@ -172,7 +143,7 @@ execute the following commands:
     $ cmake -DMSGPACK_CXX11=ON .
     $ sudo make install
-##### GUI on Windows
+#### GUI on Windows
 Clone msgpack-c git repository.

data/vendor/local/share/license/pcre/LICENCE CHANGED Viewed

@@ -25,7 +25,7 @@ Email domain:     cam.ac.uk
 University of Cambridge Computing Service,
 Cambridge, England.
-Copyright (c) 1997-2017 University of Cambridge
+Copyright (c) 1997-2018 University of Cambridge
 All rights reserved.
@@ -36,7 +36,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
-Copyright(c) 2010-2017 Zoltan Herczeg
+Copyright(c) 2010-2018 Zoltan Herczeg
 All rights reserved.
@@ -47,7 +47,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
-Copyright(c) 2009-2017 Zoltan Herczeg
+Copyright(c) 2009-2018 Zoltan Herczeg
 All rights reserved.

data/vendor/local/share/man/man1/lz4.1 CHANGED Viewed

@@ -1,88 +1,223 @@
-\"
-\" lz4.1: This is a manual page for 'lz4' program. This file is part of the
-\" lz4 <https://code.google.com/p/lz4/> project.
-\"
+.
+.TH "LZ4" "1" "2018-01-13" "lz4 1.8.1" "User Commands"
+.
+.SH "NAME"
+\fBlz4\fR \- lz4, unlz4, lz4cat \- Compress or decompress \.lz4 files
+.
+.SH "SYNOPSIS"
+\fBlz4\fR [\fIOPTIONS\fR] [\-|INPUT\-FILE] \fIOUTPUT\-FILE\fR
+.
+.P
+\fBunlz4\fR is equivalent to \fBlz4 \-d\fR
+.
+.P
+\fBlz4cat\fR is equivalent to \fBlz4 \-dcfm\fR
+.
+.P
+When writing scripts that need to decompress files, it is recommended to always use the name \fBlz4\fR with appropriate arguments (\fBlz4 \-d\fR or \fBlz4 \-dc\fR) instead of the names \fBunlz4\fR and \fBlz4cat\fR\.
+.
+.SH "DESCRIPTION"
+\fBlz4\fR is an extremely fast lossless compression algorithm, based on \fBbyte\-aligned LZ77\fR family of compression scheme\. \fBlz4\fR offers compression speeds of 400 MB/s per core, linearly scalable with multi\-core CPUs\. It features an extremely fast decoder, with speed in multiple GB/s per core, typically reaching RAM speed limit on multi\-core systems\. The native file format is the \fB\.lz4\fR format\.
+.
+.SS "Difference between lz4 and gzip"
+\fBlz4\fR supports a command line syntax similar \fIbut not identical\fR to \fBgzip(1)\fR\. Differences are :
+.
+.IP "\(bu" 4
+\fBlz4\fR preserves original files
+.
+.IP "\(bu" 4
+\fBlz4\fR compresses a single file by default (see \fB\-m\fR for multiple files)
+.
+.IP "\(bu" 4
+\fBlz4 file1 file2\fR means : compress file1 \fIinto\fR file2
+.
+.IP "\(bu" 4
+\fBlz4 file\.lz4\fR will default to decompression (use \fB\-z\fR to force compression)
+.
+.IP "\(bu" 4
+\fBlz4\fR shows real\-time notification statistics during compression or decompression of a single file (use \fB\-q\fR to silence them)
+.
+.IP "\(bu" 4
+If no destination name is provided, result is sent to \fBstdout\fR \fIexcept if stdout is the console\fR\.
+.
+.IP "\(bu" 4
+If no destination name is provided, \fBand\fR if \fBstdout\fR is the console, \fBfile\fR is compressed into \fBfile\.lz4\fR\.
+.
+.IP "\(bu" 4
+As a consequence of previous rules, note the following example : \fBlz4 file | consumer\fR sends compressed data to \fBconsumer\fR through \fBstdout\fR, hence it does \fInot\fR create \fBfile\.lz4\fR\.
+.
+.IP "\(bu" 4
+Another consequence of those rules is that to run \fBlz4\fR under \fBnohup\fR, you should provide a destination file: \fBnohup lz4 file file\.lz4\fR, because \fBnohup\fR writes the specified command\'s output to a file\.
+.
+.IP "" 0
+.
+.P
+Default behaviors can be modified by opt\-in commands, detailed below\.
+.
+.IP "\(bu" 4
+\fBlz4 \-m\fR makes it possible to provide multiple input filenames, which will be compressed into files using suffix \fB\.lz4\fR\. Progress notifications are also disabled by default (use \fB\-v\fR to enable them)\. This mode has a behavior which more closely mimics \fBgzip\fR command line, with the main remaining difference being that source files are preserved by default\.
+.
+.IP "\(bu" 4
+Similarly, \fBlz4 \-m \-d\fR can decompress multiple \fB*\.lz4\fR files\.
+.
+.IP "\(bu" 4
+It\'s possible to opt\-in to erase source files on successful compression or decompression, using \fB\-\-rm\fR command\.
+.
+.IP "\(bu" 4
+Consequently, \fBlz4 \-m \-\-rm\fR behaves the same as \fBgzip\fR\.
+.
+.IP "" 0
+.
+.SS "Concatenation of \.lz4 files"
+It is possible to concatenate \fB\.lz4\fR files as is\. \fBlz4\fR will decompress such files as if they were a single \fB\.lz4\fR file\. For example:
+.
+.IP "" 4
+.
+.nf
-\" No hyphenation
-.hy 0
-.nr HY 0
-.TH lz4 "1" "2014-02-27" "lz4" "User Commands"
-.SH NAME
-\fBlz4\fR - Extremely fast compression algorithm
-.SH SYNOPSIS
-.TP 5
-\fBlz4\fR [\fBOPTIONS\fR] [-|INPUT-FILE] <OUTPUT-FILE>
-.SH DESCRIPTION
-.PP
-\fBlz4\fR is an extremely fast lossless compression algorithm. It is based on
-the \fBLZ77\fR family of compression scheme. At the compression speed of 400
-MB/s per core, \fBlz4\fR is also scalable with multi-core CPUs. It features
-an extremely fast decoder, with speed in multiple GB/s per core, typically
-reaching the RAM speed limits on multi-core systems. \fBlz4\fR supports
-following options
-.SH OPTIONS
-.TP
-.B \-1
- fast compression (default)
-.TP
-.B \-9
- high compression
-.TP
-.B \-d
- decompression
-.TP
-.B \-f
- overwrite output without prompting
-.TP
-.B \-h/\-H
- display help/long help and exit
-.TP
-.B \-V
- display Version number and exit
-.TP
-.B \-v
- verbose mode
-.TP
-.B \-q
- suppress warnings; specify twice to suppress errors too
-.TP
-.B \-c
- force write to standard output, even if it is the console
-.TP
-.B \-t
- test compressed file integrity
-.TP
-.B \-z
- force compression
-.TP
-.B \-l
- use Legacy format (useful for Linux Kernel compression)
-.TP
-.B \-B#
- block size [4-7](default : 7)
- B4= 64KB ; B5= 256KB ; B6= 1MB ; B7= 4MB
-.TP
-.B \-BD
- block dependency (improve compression ratio)
-.TP
-.B \-BX
- enable block checksum (default:disabled)
-.TP
-.B \-Sx
- disable stream checksum (default:enabled)
-.TP
-.B \-b
- benchmark file(s)
-.TP
-.B \-i#
- iteration loops [1-9](default : 3), benchmark mode only
-.SH BUGS
-Report bugs at:- https://code.google.com/p/lz4/
-.SH AUTHOR
+lz4 file1  > foo\.lz4
+lz4 file2 >> foo\.lz4
+.
+.fi
+.
+.IP "" 0
+.
+.P
+Then \fBlz4cat foo\.lz4\fR is equivalent to \fBcat file1 file2\fR\.
+.
+.SH "OPTIONS"
+.
+.SS "Short commands concatenation"
+In some cases, some options can be expressed using short command \fB\-x\fR or long command \fB\-\-long\-word\fR\. Short commands can be concatenated together\. For example, \fB\-d \-c\fR is equivalent to \fB\-dc\fR\. Long commands cannot be concatenated\. They must be clearly separated by a space\.
+.
+.SS "Multiple commands"
+When multiple contradictory commands are issued on a same command line, only the latest one will be applied\.
+.
+.SS "Operation mode"
+.
+.TP
+\fB\-z\fR \fB\-\-compress\fR
+Compress\. This is the default operation mode when no operation mode option is specified, no other operation mode is implied from the command name (for example, \fBunlz4\fR implies \fB\-\-decompress\fR), nor from the input file name (for example, a file extension \fB\.lz4\fR implies \fB\-\-decompress\fR by default)\. \fB\-z\fR can also be used to force compression of an already compressed \fB\.lz4\fR file\.
+.
+.TP
+\fB\-d\fR \fB\-\-decompress\fR \fB\-\-uncompress\fR
+Decompress\. \fB\-\-decompress\fR is also the default operation when the input filename has an \fB\.lz4\fR extension\.
+.
+.TP
+\fB\-t\fR \fB\-\-test\fR
+Test the integrity of compressed \fB\.lz4\fR files\. The decompressed data is discarded\. No files are created nor removed\.
+.
+.TP
+\fB\-b#\fR
+Benchmark mode, using \fB#\fR compression level\.
+.
+.SS "Operation modifiers"
+.
+.TP
+\fB\-#\fR
+Compression level, with # being any value from 1 to 16\. Higher values trade compression speed for compression ratio\. Values above 16 are considered the same as 16\. Recommended values are 1 for fast compression (default), and 9 for high compression\. Speed/compression trade\-off will vary depending on data to compress\. Decompression speed remains fast at all settings\.
+.
+.TP
+\fB\-f\fR \fB\-\-[no\-]force\fR
+This option has several effects:
+.
+.IP
+If the target file already exists, overwrite it without prompting\.
+.
+.IP
+When used with \fB\-\-decompress\fR and \fBlz4\fR cannot recognize the type of the source file, copy the source file as is to standard output\. This allows \fBlz4cat \-\-force\fR to be used like \fBcat (1)\fR for files that have not been compressed with \fBlz4\fR\.
+.
+.TP
+\fB\-c\fR \fB\-\-stdout\fR \fB\-\-to\-stdout\fR
+Force write to standard output, even if it is the console\.
+.
+.TP
+\fB\-m\fR \fB\-\-multiple\fR
+Multiple input files\. Compressed file names will be appended a \fB\.lz4\fR suffix\. This mode also reduces notification level\. \fBlz4 \-m\fR has a behavior equivalent to \fBgzip \-k\fR (it preserves source files by default)\.
+.
+.TP
+\fB\-r\fR
+operate recursively on directories\. This mode also sets \fB\-m\fR (multiple input files)\.
+.
+.TP
+\fB\-B#\fR
+Block size [4\-7](default : 7)
+.
+.br
+\fB\-B4\fR= 64KB ; \fB\-B5\fR= 256KB ; \fB\-B6\fR= 1MB ; \fB\-B7\fR= 4MB
+.
+.TP
+\fB\-BD\fR
+Block Dependency (improves compression ratio on small blocks)
+.
+.TP
+\fB\-\-[no\-]frame\-crc\fR
+Select frame checksum (default:enabled)
+.
+.TP
+\fB\-\-[no\-]content\-size\fR
+Header includes original size (default:not present)
+.
+.br
+Note : this option can only be activated when the original size can be determined, hence for a file\. It won\'t work with unknown source size, such as stdin or pipe\.
+.
+.TP
+\fB\-\-[no\-]sparse\fR
+Sparse mode support (default:enabled on file, disabled on stdout)
+.
+.TP
+\fB\-l\fR
+Use Legacy format (typically for Linux Kernel compression)
+.
+.br
+Note : \fB\-l\fR is not compatible with \fB\-m\fR (\fB\-\-multiple\fR) nor \fB\-r\fR
+.
+.SS "Other options"
+.
+.TP
+\fB\-v\fR \fB\-\-verbose\fR
+Verbose mode
+.
+.TP
+\fB\-q\fR \fB\-\-quiet\fR
+Suppress warnings and real\-time statistics; specify twice to suppress errors too
+.
+.TP
+\fB\-h\fR \fB\-H\fR \fB\-\-help\fR
+Display help/long help and exit
+.
+.TP
+\fB\-V\fR \fB\-\-version\fR
+Display Version number and exit
+.
+.TP
+\fB\-k\fR \fB\-\-keep\fR
+Preserve source files (default behavior)
+.
+.TP
+\fB\-\-rm\fR
+Delete source files on successful compression or decompression
+.
+.TP
+\fB\-\-\fR
+Treat all subsequent arguments as files
+.
+.SS "Benchmark mode"
+.
+.TP
+\fB\-b#\fR
+Benchmark file(s), using # compression level
+.
+.TP
+\fB\-e#\fR
+Benchmark multiple compression levels, from b# to e# (included)
+.
+.TP
+\fB\-i#\fR
+Minimum evaluation in seconds [1\-9] (default : 3)
+.
+.SH "BUGS"
+Report bugs at: https://github\.com/lz4/lz4/issues
+.
+.SH "AUTHOR"
 Yann Collet

data/vendor/local/share/man/man1/lz4c.1 CHANGED Viewed

@@ -1,33 +1,223 @@
-\"
-\" lz4c.1: This is a manual page for 'lz4c' program. This file is part of the
-\" lz4 <https://code.google.com/p/lz4/> project.
-\"
+.
+.TH "LZ4" "1" "2018-01-13" "lz4 1.8.1" "User Commands"
+.
+.SH "NAME"
+\fBlz4\fR \- lz4, unlz4, lz4cat \- Compress or decompress \.lz4 files
+.
+.SH "SYNOPSIS"
+\fBlz4\fR [\fIOPTIONS\fR] [\-|INPUT\-FILE] \fIOUTPUT\-FILE\fR
+.
+.P
+\fBunlz4\fR is equivalent to \fBlz4 \-d\fR
+.
+.P
+\fBlz4cat\fR is equivalent to \fBlz4 \-dcfm\fR
+.
+.P
+When writing scripts that need to decompress files, it is recommended to always use the name \fBlz4\fR with appropriate arguments (\fBlz4 \-d\fR or \fBlz4 \-dc\fR) instead of the names \fBunlz4\fR and \fBlz4cat\fR\.
+.
+.SH "DESCRIPTION"
+\fBlz4\fR is an extremely fast lossless compression algorithm, based on \fBbyte\-aligned LZ77\fR family of compression scheme\. \fBlz4\fR offers compression speeds of 400 MB/s per core, linearly scalable with multi\-core CPUs\. It features an extremely fast decoder, with speed in multiple GB/s per core, typically reaching RAM speed limit on multi\-core systems\. The native file format is the \fB\.lz4\fR format\.
+.
+.SS "Difference between lz4 and gzip"
+\fBlz4\fR supports a command line syntax similar \fIbut not identical\fR to \fBgzip(1)\fR\. Differences are :
+.
+.IP "\(bu" 4
+\fBlz4\fR preserves original files
+.
+.IP "\(bu" 4
+\fBlz4\fR compresses a single file by default (see \fB\-m\fR for multiple files)
+.
+.IP "\(bu" 4
+\fBlz4 file1 file2\fR means : compress file1 \fIinto\fR file2
+.
+.IP "\(bu" 4
+\fBlz4 file\.lz4\fR will default to decompression (use \fB\-z\fR to force compression)
+.
+.IP "\(bu" 4
+\fBlz4\fR shows real\-time notification statistics during compression or decompression of a single file (use \fB\-q\fR to silence them)
+.
+.IP "\(bu" 4
+If no destination name is provided, result is sent to \fBstdout\fR \fIexcept if stdout is the console\fR\.
+.
+.IP "\(bu" 4
+If no destination name is provided, \fBand\fR if \fBstdout\fR is the console, \fBfile\fR is compressed into \fBfile\.lz4\fR\.
+.
+.IP "\(bu" 4
+As a consequence of previous rules, note the following example : \fBlz4 file | consumer\fR sends compressed data to \fBconsumer\fR through \fBstdout\fR, hence it does \fInot\fR create \fBfile\.lz4\fR\.
+.
+.IP "\(bu" 4
+Another consequence of those rules is that to run \fBlz4\fR under \fBnohup\fR, you should provide a destination file: \fBnohup lz4 file file\.lz4\fR, because \fBnohup\fR writes the specified command\'s output to a file\.
+.
+.IP "" 0
+.
+.P
+Default behaviors can be modified by opt\-in commands, detailed below\.
+.
+.IP "\(bu" 4
+\fBlz4 \-m\fR makes it possible to provide multiple input filenames, which will be compressed into files using suffix \fB\.lz4\fR\. Progress notifications are also disabled by default (use \fB\-v\fR to enable them)\. This mode has a behavior which more closely mimics \fBgzip\fR command line, with the main remaining difference being that source files are preserved by default\.
+.
+.IP "\(bu" 4
+Similarly, \fBlz4 \-m \-d\fR can decompress multiple \fB*\.lz4\fR files\.
+.
+.IP "\(bu" 4
+It\'s possible to opt\-in to erase source files on successful compression or decompression, using \fB\-\-rm\fR command\.
+.
+.IP "\(bu" 4
+Consequently, \fBlz4 \-m \-\-rm\fR behaves the same as \fBgzip\fR\.
+.
+.IP "" 0
+.
+.SS "Concatenation of \.lz4 files"
+It is possible to concatenate \fB\.lz4\fR files as is\. \fBlz4\fR will decompress such files as if they were a single \fB\.lz4\fR file\. For example:
+.
+.IP "" 4
+.
+.nf
-\" No hyphenation
-.hy 0
-.nr HY 0
-.TH lz4c "1" "2014-04-15" "lz4c" "User Commands"
-.SH NAME
-\fBlz4\fR - Extremely fast compression algorithm
-.SH SYNOPSIS
-.TP 5
-\fBlz4c\fR [\fBOPTIONS\fR] [-|INPUT-FILE] <OUTPUT-FILE>
-.SH DESCRIPTION
-.PP
-\fBlz4c\fR is the legacy version of \fBlz4\fR.
-As such, it supports older supplementary legacy commands.
-\fBlz4c\fR is now deprecated.
-It is recommended to use \fBlz4\fR instead whenever possible.
-To get a list of commands specific to lz4c, do :
-lz4c -h
-.SH BUGS
-Report bugs at:- https://code.google.com/p/lz4/
-.SH AUTHOR
-Yann Collet
+lz4 file1  > foo\.lz4
+lz4 file2 >> foo\.lz4
+.
+.fi
+.
+.IP "" 0
+.
+.P
+Then \fBlz4cat foo\.lz4\fR is equivalent to \fBcat file1 file2\fR\.
+.
+.SH "OPTIONS"
+.
+.SS "Short commands concatenation"
+In some cases, some options can be expressed using short command \fB\-x\fR or long command \fB\-\-long\-word\fR\. Short commands can be concatenated together\. For example, \fB\-d \-c\fR is equivalent to \fB\-dc\fR\. Long commands cannot be concatenated\. They must be clearly separated by a space\.
+.
+.SS "Multiple commands"
+When multiple contradictory commands are issued on a same command line, only the latest one will be applied\.
+.
+.SS "Operation mode"
+.
+.TP
+\fB\-z\fR \fB\-\-compress\fR
+Compress\. This is the default operation mode when no operation mode option is specified, no other operation mode is implied from the command name (for example, \fBunlz4\fR implies \fB\-\-decompress\fR), nor from the input file name (for example, a file extension \fB\.lz4\fR implies \fB\-\-decompress\fR by default)\. \fB\-z\fR can also be used to force compression of an already compressed \fB\.lz4\fR file\.
+.
+.TP
+\fB\-d\fR \fB\-\-decompress\fR \fB\-\-uncompress\fR
+Decompress\. \fB\-\-decompress\fR is also the default operation when the input filename has an \fB\.lz4\fR extension\.
+.
+.TP
+\fB\-t\fR \fB\-\-test\fR
+Test the integrity of compressed \fB\.lz4\fR files\. The decompressed data is discarded\. No files are created nor removed\.
+.
+.TP
+\fB\-b#\fR
+Benchmark mode, using \fB#\fR compression level\.
+.
+.SS "Operation modifiers"
+.
+.TP
+\fB\-#\fR
+Compression level, with # being any value from 1 to 16\. Higher values trade compression speed for compression ratio\. Values above 16 are considered the same as 16\. Recommended values are 1 for fast compression (default), and 9 for high compression\. Speed/compression trade\-off will vary depending on data to compress\. Decompression speed remains fast at all settings\.
+.
+.TP
+\fB\-f\fR \fB\-\-[no\-]force\fR
+This option has several effects:
+.
+.IP
+If the target file already exists, overwrite it without prompting\.
+.
+.IP
+When used with \fB\-\-decompress\fR and \fBlz4\fR cannot recognize the type of the source file, copy the source file as is to standard output\. This allows \fBlz4cat \-\-force\fR to be used like \fBcat (1)\fR for files that have not been compressed with \fBlz4\fR\.
+.
+.TP
+\fB\-c\fR \fB\-\-stdout\fR \fB\-\-to\-stdout\fR
+Force write to standard output, even if it is the console\.
+.
+.TP
+\fB\-m\fR \fB\-\-multiple\fR
+Multiple input files\. Compressed file names will be appended a \fB\.lz4\fR suffix\. This mode also reduces notification level\. \fBlz4 \-m\fR has a behavior equivalent to \fBgzip \-k\fR (it preserves source files by default)\.
+.
+.TP
+\fB\-r\fR
+operate recursively on directories\. This mode also sets \fB\-m\fR (multiple input files)\.
+.
+.TP
+\fB\-B#\fR
+Block size [4\-7](default : 7)
+.
+.br
+\fB\-B4\fR= 64KB ; \fB\-B5\fR= 256KB ; \fB\-B6\fR= 1MB ; \fB\-B7\fR= 4MB
+.
+.TP
+\fB\-BD\fR
+Block Dependency (improves compression ratio on small blocks)
+.
+.TP
+\fB\-\-[no\-]frame\-crc\fR
+Select frame checksum (default:enabled)
+.
+.TP
+\fB\-\-[no\-]content\-size\fR
+Header includes original size (default:not present)
+.
+.br
+Note : this option can only be activated when the original size can be determined, hence for a file\. It won\'t work with unknown source size, such as stdin or pipe\.
+.
+.TP
+\fB\-\-[no\-]sparse\fR
+Sparse mode support (default:enabled on file, disabled on stdout)
+.
+.TP
+\fB\-l\fR
+Use Legacy format (typically for Linux Kernel compression)
+.
+.br
+Note : \fB\-l\fR is not compatible with \fB\-m\fR (\fB\-\-multiple\fR) nor \fB\-r\fR
+.
+.SS "Other options"
+.
+.TP
+\fB\-v\fR \fB\-\-verbose\fR
+Verbose mode
+.
+.TP
+\fB\-q\fR \fB\-\-quiet\fR
+Suppress warnings and real\-time statistics; specify twice to suppress errors too
+.
+.TP
+\fB\-h\fR \fB\-H\fR \fB\-\-help\fR
+Display help/long help and exit
+.
+.TP
+\fB\-V\fR \fB\-\-version\fR
+Display Version number and exit
+.
+.TP
+\fB\-k\fR \fB\-\-keep\fR
+Preserve source files (default behavior)
+.
+.TP
+\fB\-\-rm\fR
+Delete source files on successful compression or decompression
+.
+.TP
+\fB\-\-\fR
+Treat all subsequent arguments as files
+.
+.SS "Benchmark mode"
+.
+.TP
+\fB\-b#\fR
+Benchmark file(s), using # compression level
+.
+.TP
+\fB\-e#\fR
+Benchmark multiple compression levels, from b# to e# (included)
+.
+.TP
+\fB\-i#\fR
+Minimum evaluation in seconds [1\-9] (default : 3)
+.
+.SH "BUGS"
+Report bugs at: https://github\.com/lz4/lz4/issues
+.
+.SH "AUTHOR"
+Yann Collet