rb-gsl 1.16.0.5 → 1.16.0.6

data/test/test_helper.rb

@@ -1,42 +0,0 @@
-require 'test/unit'
-require 'gsl'
-
-GSL::IEEE.env_setup
-GSL::Rng.env_setup
-
-class GSL::TestCase < Test::Unit::TestCase
-
-  def assert_factor(result, expected, factor, desc)
-    refute result == expected ? false : expected.zero? ? result != expected :
-      (u = result / expected; u > factor || u < 1.0 / factor),
-      '%s (%.18g observed vs %.18g expected)' % [desc, result, expected]
-  end
-
-  def assert_rel(result, expected, relerr, desc)
-    refute((GSL.isnan?(result) || GSL.isnan?(expected)) ?
-       GSL.isnan?(result) != GSL.isnan?(expected) :
-      (GSL.isinf?(result) || GSL.isinf?(expected)) ?
-       GSL.isinf?(result) != GSL.isinf?(expected) :
-      expected.zero? ? result.abs > relerr :
-      (result - expected).abs / expected.abs > relerr,
-      '%s (%.18g observed vs %.18g expected)' % [desc, result, expected])
-  end
-
-  def assert_abs(result, expected, abserr, desc)
-    refute((GSL.isnan?(result) || GSL.isnan?(expected)) ?
-       GSL.isnan?(result) != GSL.isnan?(expected) :
-      (GSL.isinf?(result) || GSL.isinf?(expected)) ?
-       GSL.isinf?(result) != GSL.isinf?(expected) :
-      (result - expected).abs > abserr,
-      '%s (%.18g observed vs %.18g expected)' % [desc, result, expected])
-  end
-
-  def assert_int(result, expected, desc)
-    assert(result == expected, '%s (%d observed vs %d expected)' % [desc, result, expected])
-  end
-
-  def assert_tol(a, b, msg)
-    assert((a - b).abs < (self.class::EPSREL * GSL.MIN(a.abs, b.abs) + self.class::EPSABS), msg)
-  end
-
-end

data/uncrustify.cfg

@@ -1,1693 +0,0 @@
-# Uncrustify 0.61
-
-#
-# General options
-#
-
-# The type of line endings
-newlines                                  = lf     # auto/lf/crlf/cr
-
-# The original size of tabs in the input
-input_tab_size                            = 8        # number
-
-# The size of tabs in the output (only used if align_with_tabs=true)
-output_tab_size                           = 8        # number
-
-# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)
-string_escape_char                        = 92       # number
-
-# Alternate string escape char for Pawn. Only works right before the quote char.
-string_escape_char2                       = 0        # number
-
-# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
-# If true (default), 'assert(x<0 && y>=3)' will be broken.
-# Improvements to template detection may make this option obsolete.
-tok_split_gte                             = false    # false/true
-
-# Control what to do with the UTF-8 BOM (recommend 'remove')
-utf8_bom                                  = remove   # ignore/add/remove/force
-
-# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8
-utf8_byte                                 = false    # false/true
-
-# Force the output encoding to UTF-8
-utf8_force                                = false    # false/true
-
-#
-# Indenting
-#
-
-# The number of columns to indent per level.
-# Usually 2, 3, 4, or 8.
-indent_columns                            = 2        # number
-
-# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
-# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level
-indent_continue                           = 0        # number
-
-# How to use tabs when indenting code
-# 0=spaces only
-# 1=indent with tabs to brace level, align with spaces
-# 2=indent and align with tabs, using spaces when not on a tabstop
-indent_with_tabs                          = 0        # number
-
-# Comments that are not a brace level are indented with tabs on a tabstop.
-# Requires indent_with_tabs=2. If false, will use spaces.
-indent_cmt_with_tabs                      = false    # false/true
-
-# Whether to indent strings broken by '\' so that they line up
-indent_align_string                       = false    # false/true
-
-# The number of spaces to indent multi-line XML strings.
-# Requires indent_align_string=True
-indent_xml_string                         = 0        # number
-
-# Spaces to indent '{' from level
-indent_brace                              = 0        # number
-
-# Whether braces are indented to the body level
-indent_braces                             = false    # false/true
-
-# Disabled indenting function braces if indent_braces is true
-indent_braces_no_func                     = false    # false/true
-
-# Disabled indenting class braces if indent_braces is true
-indent_braces_no_class                    = false    # false/true
-
-# Disabled indenting struct braces if indent_braces is true
-indent_braces_no_struct                   = false    # false/true
-
-# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
-indent_brace_parent                       = false    # false/true
-
-# Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.
-indent_paren_open_brace                   = false    # false/true
-
-# Whether the 'namespace' body is indented
-indent_namespace                          = false    # false/true
-
-# Only indent one namespace and no sub-namepaces.
-# Requires indent_namespace=true.
-indent_namespace_single_indent            = false    # false/true
-
-# The number of spaces to indent a namespace block
-indent_namespace_level                    = 0        # number
-
-# If the body of the namespace is longer than this number, it won't be indented.
-# Requires indent_namespace=true. Default=0 (no limit)
-indent_namespace_limit                    = 0        # number
-
-# Whether the 'extern "C"' body is indented
-indent_extern                             = false    # false/true
-
-# Whether the 'class' body is indented
-indent_class                              = false    # false/true
-
-# Whether to indent the stuff after a leading base class colon
-indent_class_colon                        = false    # false/true
-
-# Whether to indent the stuff after a leading class initializer colon
-indent_constr_colon                       = false    # false/true
-
-# Virtual indent from the ':' for member initializers. Default is 2
-indent_ctor_init_leading                  = 2        # number
-
-# Additional indenting for constructor initializer list
-indent_ctor_init                          = 0        # number
-
-# False=treat 'else\nif' as 'else if' for indenting purposes
-# True=indent the 'if' one level
-indent_else_if                            = false    # false/true
-
-# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute
-indent_var_def_blk                        = 0        # number
-
-# Indent continued variable declarations instead of aligning.
-indent_var_def_cont                       = false    # false/true
-
-# True:  force indentation of function definition to start in column 1
-# False: use the default behavior
-indent_func_def_force_col1                = false    # false/true
-
-# True:  indent continued function call parameters one indent level
-# False: align parameters under the open paren
-indent_func_call_param                    = false    # false/true
-
-# Same as indent_func_call_param, but for function defs
-indent_func_def_param                     = false    # false/true
-
-# Same as indent_func_call_param, but for function protos
-indent_func_proto_param                   = false    # false/true
-
-# Same as indent_func_call_param, but for class declarations
-indent_func_class_param                   = false    # false/true
-
-# Same as indent_func_call_param, but for class variable constructors
-indent_func_ctor_var_param                = false    # false/true
-
-# Same as indent_func_call_param, but for templates
-indent_template_param                     = false    # false/true
-
-# Double the indent for indent_func_xxx_param options
-indent_func_param_double                  = false    # false/true
-
-# Indentation column for standalone 'const' function decl/proto qualifier
-indent_func_const                         = 0        # number
-
-# Indentation column for standalone 'throw' function decl/proto qualifier
-indent_func_throw                         = 0        # number
-
-# The number of spaces to indent a continued '->' or '.'
-# Usually set to 0, 1, or indent_columns.
-indent_member                             = 0        # number
-
-# Spaces to indent single line ('//') comments on lines before code
-indent_sing_line_comments                 = 0        # number
-
-# If set, will indent trailing single line ('//') comments relative
-# to the code instead of trying to keep the same absolute column
-indent_relative_single_line_comments      = false    # false/true
-
-# Spaces to indent 'case' from 'switch'
-# Usually 0 or indent_columns.
-indent_switch_case                        = 0        # number
-
-# Spaces to shift the 'case' line, without affecting any other lines
-# Usually 0.
-indent_case_shift                         = 0        # number
-
-# Spaces to indent '{' from 'case'.
-# By default, the brace will appear under the 'c' in case.
-# Usually set to 0 or indent_columns.
-indent_case_brace                         = 0        # number
-
-# Whether to indent comments found in first column
-indent_col1_comment                       = false    # false/true
-
-# How to indent goto labels
-#  >0 : absolute column where 1 is the leftmost column
-#  <=0 : subtract from brace indent
-indent_label                              = 1        # number
-
-# Same as indent_label, but for access specifiers that are followed by a colon
-indent_access_spec                        = 1        # number
-
-# Indent the code after an access specifier by one level.
-# If set, this option forces 'indent_access_spec=0'
-indent_access_spec_body                   = false    # false/true
-
-# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)
-indent_paren_nl                           = false    # false/true
-
-# Controls the indent of a close paren after a newline.
-# 0: Indent to body level
-# 1: Align under the open paren
-# 2: Indent to the brace level
-indent_paren_close                        = 0        # number
-
-# Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren
-indent_comma_paren                        = false    # false/true
-
-# Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren
-indent_bool_paren                         = false    # false/true
-
-# If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones
-indent_first_bool_expr                    = false    # false/true
-
-# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended)
-indent_square_nl                          = false    # false/true
-
-# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies
-indent_preserve_sql                       = false    # false/true
-
-# Align continued statements at the '='. Default=True
-# If FALSE or the '=' is followed by a newline, the next line is indent one tab.
-indent_align_assign                       = true     # false/true
-
-# Indent OC blocks at brace level instead of usual rules.
-indent_oc_block                           = false    # false/true
-
-# Indent OC blocks in a message relative to the parameter name.
-# 0=use indent_oc_block rules, 1+=spaces to indent
-indent_oc_block_msg                       = 0        # number
-
-# Minimum indent for subsequent parameters
-indent_oc_msg_colon                       = 0        # number
-
-# If true, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
-# Default is true.
-indent_oc_msg_prioritize_first_colon      = true     # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).
-indent_oc_block_msg_xcode_style           = false    # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.
-indent_oc_block_msg_from_keyword          = false    # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.
-indent_oc_block_msg_from_colon            = false    # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.
-indent_oc_block_msg_from_caret            = false    # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.
-indent_oc_block_msg_from_brace            = false    # false/true
-
-#
-# Spacing options
-#
-
-# Add or remove space around arithmetic operator '+', '-', '/', '*', etc
-sp_arith                                  = ignore   # ignore/add/remove/force
-
-# Add or remove space around assignment operator '=', '+=', etc
-sp_assign                                 = add   # ignore/add/remove/force
-
-# Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign
-sp_cpp_lambda_assign                      = ignore   # ignore/add/remove/force
-
-# Add or remove space after the capture specification in C++11 lambda.
-sp_cpp_lambda_paren                       = ignore   # ignore/add/remove/force
-
-# Add or remove space around assignment operator '=' in a prototype
-sp_assign_default                         = ignore   # ignore/add/remove/force
-
-# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
-sp_before_assign                          = add   # ignore/add/remove/force
-
-# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
-sp_after_assign                           = add  # ignore/add/remove/force
-
-# Add or remove space in 'NS_ENUM ('
-sp_enum_paren                             = ignore   # ignore/add/remove/force
-
-# Add or remove space around assignment '=' in enum
-sp_enum_assign                            = ignore   # ignore/add/remove/force
-
-# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
-sp_enum_before_assign                     = ignore   # ignore/add/remove/force
-
-# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
-sp_enum_after_assign                      = ignore   # ignore/add/remove/force
-
-# Add or remove space around preprocessor '##' concatenation operator. Default=Add
-sp_pp_concat                              = add      # ignore/add/remove/force
-
-# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.
-sp_pp_stringify                           = ignore   # ignore/add/remove/force
-
-# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.
-sp_before_pp_stringify                    = ignore   # ignore/add/remove/force
-
-# Add or remove space around boolean operators '&&' and '||'
-sp_bool                                   = ignore   # ignore/add/remove/force
-
-# Add or remove space around compare operator '<', '>', '==', etc
-sp_compare                                = ignore   # ignore/add/remove/force
-
-# Add or remove space inside '(' and ')'
-sp_inside_paren                           = ignore   # ignore/add/remove/force
-
-# Add or remove space between nested parens: '((' vs ') )'
-sp_paren_paren                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between back-to-back parens: ')(' vs ') ('
-sp_cparen_oparen                          = ignore   # ignore/add/remove/force
-
-# Whether to balance spaces inside nested parens
-sp_balance_nested_parens                  = false    # false/true
-
-# Add or remove space between ')' and '{'
-sp_paren_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove space before pointer star '*'
-sp_before_ptr_star                        = ignore   # ignore/add/remove/force
-
-# Add or remove space before pointer star '*' that isn't followed by a variable name
-# If set to 'ignore', sp_before_ptr_star is used instead.
-sp_before_unnamed_ptr_star                = ignore   # ignore/add/remove/force
-
-# Add or remove space between pointer stars '*'
-sp_between_ptr_star                       = ignore   # ignore/add/remove/force
-
-# Add or remove space after pointer star '*', if followed by a word.
-sp_after_ptr_star                         = ignore   # ignore/add/remove/force
-
-# Add or remove space after pointer star '*', if followed by a qualifier.
-sp_after_ptr_star_qualifier               = ignore   # ignore/add/remove/force
-
-# Add or remove space after a pointer star '*', if followed by a func proto/def.
-sp_after_ptr_star_func                    = ignore   # ignore/add/remove/force
-
-# Add or remove space after a pointer star '*', if followed by an open paren (function types).
-sp_ptr_star_paren                         = ignore   # ignore/add/remove/force
-
-# Add or remove space before a pointer star '*', if followed by a func proto/def.
-sp_before_ptr_star_func                   = ignore   # ignore/add/remove/force
-
-# Add or remove space before a reference sign '&'
-sp_before_byref                           = ignore   # ignore/add/remove/force
-
-# Add or remove space before a reference sign '&' that isn't followed by a variable name
-# If set to 'ignore', sp_before_byref is used instead.
-sp_before_unnamed_byref                   = ignore   # ignore/add/remove/force
-
-# Add or remove space after reference sign '&', if followed by a word.
-sp_after_byref                            = ignore   # ignore/add/remove/force
-
-# Add or remove space after a reference sign '&', if followed by a func proto/def.
-sp_after_byref_func                       = ignore   # ignore/add/remove/force
-
-# Add or remove space before a reference sign '&', if followed by a func proto/def.
-sp_before_byref_func                      = ignore   # ignore/add/remove/force
-
-# Add or remove space between type and word. Default=Force
-sp_after_type                             = force    # ignore/add/remove/force
-
-# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.
-sp_before_template_paren                  = ignore   # ignore/add/remove/force
-
-# Add or remove space in 'template <' vs 'template<'.
-# If set to ignore, sp_before_angle is used.
-sp_template_angle                         = ignore   # ignore/add/remove/force
-
-# Add or remove space before '<>'
-sp_before_angle                           = ignore   # ignore/add/remove/force
-
-# Add or remove space inside '<' and '>'
-sp_inside_angle                           = ignore   # ignore/add/remove/force
-
-# Add or remove space after '<>'
-sp_after_angle                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between '<>' and '(' as found in 'new List<byte>();'
-sp_angle_paren                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between '<>' and a word as in 'List<byte> m;'
-sp_angle_word                             = ignore   # ignore/add/remove/force
-
-# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add
-sp_angle_shift                            = add      # ignore/add/remove/force
-
-# Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False
-# sp_angle_shift cannot remove the space without this option.
-sp_permit_cpp11_shift                     = false    # false/true
-
-# Add or remove space before '(' of 'if', 'for', 'switch', and 'while'
-sp_before_sparen                          = ignore   # ignore/add/remove/force
-
-# Add or remove space inside if-condition '(' and ')'
-sp_inside_sparen                          = ignore   # ignore/add/remove/force
-
-# Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
-sp_inside_sparen_close                    = ignore   # ignore/add/remove/force
-
-# Add or remove space before if-condition '('. Overrides sp_inside_sparen.
-sp_inside_sparen_open                     = ignore   # ignore/add/remove/force
-
-# Add or remove space after ')' of 'if', 'for', 'switch', and 'while'
-sp_after_sparen                           = ignore   # ignore/add/remove/force
-
-# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while'
-sp_sparen_brace                           = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'invariant' and '(' in the D language.
-sp_invariant_paren                        = ignore   # ignore/add/remove/force
-
-# Add or remove space after the ')' in 'invariant (C) c' in the D language.
-sp_after_invariant_paren                  = ignore   # ignore/add/remove/force
-
-# Add or remove space before empty statement ';' on 'if', 'for' and 'while'
-sp_special_semi                           = ignore   # ignore/add/remove/force
-
-# Add or remove space before ';'. Default=Remove
-sp_before_semi                            = remove   # ignore/add/remove/force
-
-# Add or remove space before ';' in non-empty 'for' statements
-sp_before_semi_for                        = ignore   # ignore/add/remove/force
-
-# Add or remove space before a semicolon of an empty part of a for statement.
-sp_before_semi_for_empty                  = ignore   # ignore/add/remove/force
-
-# Add or remove space after ';', except when followed by a comment. Default=Add
-sp_after_semi                             = add      # ignore/add/remove/force
-
-# Add or remove space after ';' in non-empty 'for' statements. Default=Force
-sp_after_semi_for                         = force    # ignore/add/remove/force
-
-# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
-sp_after_semi_for_empty                   = ignore   # ignore/add/remove/force
-
-# Add or remove space before '[' (except '[]')
-sp_before_square                          = ignore   # ignore/add/remove/force
-
-# Add or remove space before '[]'
-sp_before_squares                         = ignore   # ignore/add/remove/force
-
-# Add or remove space inside a non-empty '[' and ']'
-sp_inside_square                          = ignore   # ignore/add/remove/force
-
-# Add or remove space after ','
-sp_after_comma                            = ignore   # ignore/add/remove/force
-
-# Add or remove space before ','
-sp_before_comma                           = remove   # ignore/add/remove/force
-
-# Add or remove space between an open paren and comma: '(,' vs '( ,'
-sp_paren_comma                            = force    # ignore/add/remove/force
-
-# Add or remove space before the variadic '...' when preceded by a non-punctuator
-sp_before_ellipsis                        = ignore   # ignore/add/remove/force
-
-# Add or remove space after class ':'
-sp_after_class_colon                      = ignore   # ignore/add/remove/force
-
-# Add or remove space before class ':'
-sp_before_class_colon                     = ignore   # ignore/add/remove/force
-
-# Add or remove space after class constructor ':'
-sp_after_constr_colon                     = ignore   # ignore/add/remove/force
-
-# Add or remove space before class constructor ':'
-sp_before_constr_colon                    = ignore   # ignore/add/remove/force
-
-# Add or remove space before case ':'. Default=Remove
-sp_before_case_colon                      = remove   # ignore/add/remove/force
-
-# Add or remove space between 'operator' and operator sign
-sp_after_operator                         = ignore   # ignore/add/remove/force
-
-# Add or remove space between the operator symbol and the open paren, as in 'operator ++('
-sp_after_operator_sym                     = ignore   # ignore/add/remove/force
-
-# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'
-sp_after_cast                             = ignore   # ignore/add/remove/force
-
-# Add or remove spaces inside cast parens
-sp_inside_paren_cast                      = ignore   # ignore/add/remove/force
-
-# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'
-sp_cpp_cast_paren                         = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'sizeof' and '('
-sp_sizeof_paren                           = ignore   # ignore/add/remove/force
-
-# Add or remove space after the tag keyword (Pawn)
-sp_after_tag                              = ignore   # ignore/add/remove/force
-
-# Add or remove space inside enum '{' and '}'
-sp_inside_braces_enum                     = ignore   # ignore/add/remove/force
-
-# Add or remove space inside struct/union '{' and '}'
-sp_inside_braces_struct                   = ignore   # ignore/add/remove/force
-
-# Add or remove space inside '{' and '}'
-sp_inside_braces                          = ignore   # ignore/add/remove/force
-
-# Add or remove space inside '{}'
-sp_inside_braces_empty                    = ignore   # ignore/add/remove/force
-
-# Add or remove space between return type and function name
-# A minimum of 1 is forced except for pointer return types.
-sp_type_func                              = ignore   # ignore/add/remove/force
-
-# Add or remove space between function name and '(' on function declaration
-sp_func_proto_paren                       = ignore   # ignore/add/remove/force
-
-# Add or remove space between function name and '(' on function definition
-sp_func_def_paren                         = ignore   # ignore/add/remove/force
-
-# Add or remove space inside empty function '()'
-sp_inside_fparens                         = ignore   # ignore/add/remove/force
-
-# Add or remove space inside function '(' and ')'
-sp_inside_fparen                          = ignore   # ignore/add/remove/force
-
-# Add or remove space inside the first parens in the function type: 'void (*x)(...)'
-sp_inside_tparen                          = ignore   # ignore/add/remove/force
-
-# Add or remove between the parens in the function type: 'void (*x)(...)'
-sp_after_tparen_close                     = ignore   # ignore/add/remove/force
-
-# Add or remove space between ']' and '(' when part of a function call.
-sp_square_fparen                          = ignore   # ignore/add/remove/force
-
-# Add or remove space between ')' and '{' of function
-sp_fparen_brace                           = ignore   # ignore/add/remove/force
-
-# Java: Add or remove space between ')' and '{{' of double brace initializer.
-sp_fparen_dbrace                          = ignore   # ignore/add/remove/force
-
-# Add or remove space between function name and '(' on function calls
-sp_func_call_paren                        = ignore   # ignore/add/remove/force
-
-# Add or remove space between function name and '()' on function calls without parameters.
-# If set to 'ignore' (the default), sp_func_call_paren is used.
-sp_func_call_paren_empty                  = ignore   # ignore/add/remove/force
-
-# Add or remove space between the user function name and '(' on function calls
-# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
-sp_func_call_user_paren                   = ignore   # ignore/add/remove/force
-
-# Add or remove space between a constructor/destructor and the open paren
-sp_func_class_paren                       = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'return' and '('
-sp_return_paren                           = ignore   # ignore/add/remove/force
-
-# Add or remove space between '__attribute__' and '('
-sp_attribute_paren                        = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'defined' and '(' in '#if defined (FOO)'
-sp_defined_paren                          = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'throw' and '(' in 'throw (something)'
-sp_throw_paren                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'
-sp_after_throw                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'catch' and '(' in 'catch (something) { }'
-# If set to ignore, sp_before_sparen is used.
-sp_catch_paren                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
-# If set to ignore, sp_before_sparen is used.
-sp_version_paren                          = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
-# If set to ignore, sp_before_sparen is used.
-sp_scope_paren                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between macro and value
-sp_macro                                  = ignore   # ignore/add/remove/force
-
-# Add or remove space between macro function ')' and value
-sp_macro_func                             = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'else' and '{' if on the same line
-sp_else_brace                             = ignore   # ignore/add/remove/force
-
-# Add or remove space between '}' and 'else' if on the same line
-sp_brace_else                             = ignore   # ignore/add/remove/force
-
-# Add or remove space between '}' and the name of a typedef on the same line
-sp_brace_typedef                          = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'catch' and '{' if on the same line
-sp_catch_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between '}' and 'catch' if on the same line
-sp_brace_catch                            = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'finally' and '{' if on the same line
-sp_finally_brace                          = ignore   # ignore/add/remove/force
-
-# Add or remove space between '}' and 'finally' if on the same line
-sp_brace_finally                          = ignore   # ignore/add/remove/force
-
-# Add or remove space between 'try' and '{' if on the same line
-sp_try_brace                              = ignore   # ignore/add/remove/force
-
-# Add or remove space between get/set and '{' if on the same line
-sp_getset_brace                           = ignore   # ignore/add/remove/force
-
-# Add or remove space between a variable and '{' for C++ uniform initialization
-sp_word_brace                             = add      # ignore/add/remove/force
-
-# Add or remove space between a variable and '{' for a namespace
-sp_word_brace_ns                          = add      # ignore/add/remove/force
-
-# Add or remove space before the '::' operator
-sp_before_dc                              = ignore   # ignore/add/remove/force
-
-# Add or remove space after the '::' operator
-sp_after_dc                               = ignore   # ignore/add/remove/force
-
-# Add or remove around the D named array initializer ':' operator
-sp_d_array_colon                          = ignore   # ignore/add/remove/force
-
-# Add or remove space after the '!' (not) operator. Default=Remove
-sp_not                                    = remove   # ignore/add/remove/force
-
-# Add or remove space after the '~' (invert) operator. Default=Remove
-sp_inv                                    = remove   # ignore/add/remove/force
-
-# Add or remove space after the '&' (address-of) operator. Default=Remove
-# This does not affect the spacing after a '&' that is part of a type.
-sp_addr                                   = remove   # ignore/add/remove/force
-
-# Add or remove space around the '.' or '->' operators. Default=Remove
-sp_member                                 = remove   # ignore/add/remove/force
-
-# Add or remove space after the '*' (dereference) operator. Default=Remove
-# This does not affect the spacing after a '*' that is part of a type.
-sp_deref                                  = remove   # ignore/add/remove/force
-
-# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove
-sp_sign                                   = remove   # ignore/add/remove/force
-
-# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove
-sp_incdec                                 = remove   # ignore/add/remove/force
-
-# Add or remove space before a backslash-newline at the end of a line. Default=Add
-sp_before_nl_cont                         = add      # ignore/add/remove/force
-
-# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'
-sp_after_oc_scope                         = ignore   # ignore/add/remove/force
-
-# Add or remove space after the colon in message specs
-# '-(int) f:(int) x;' vs '-(int) f: (int) x;'
-sp_after_oc_colon                         = ignore   # ignore/add/remove/force
-
-# Add or remove space before the colon in message specs
-# '-(int) f: (int) x;' vs '-(int) f : (int) x;'
-sp_before_oc_colon                        = ignore   # ignore/add/remove/force
-
-# Add or remove space after the colon in immutable dictionary expression
-# 'NSDictionary *test = @{@"foo" :@"bar"};'
-sp_after_oc_dict_colon                    = ignore   # ignore/add/remove/force
-
-# Add or remove space before the colon in immutable dictionary expression
-# 'NSDictionary *test = @{@"foo" :@"bar"};'
-sp_before_oc_dict_colon                   = ignore   # ignore/add/remove/force
-
-# Add or remove space after the colon in message specs
-# '[object setValue:1];' vs '[object setValue: 1];'
-sp_after_send_oc_colon                    = ignore   # ignore/add/remove/force
-
-# Add or remove space before the colon in message specs
-# '[object setValue:1];' vs '[object setValue :1];'
-sp_before_send_oc_colon                   = ignore   # ignore/add/remove/force
-
-# Add or remove space after the (type) in message specs
-# '-(int)f: (int) x;' vs '-(int)f: (int)x;'
-sp_after_oc_type                          = ignore   # ignore/add/remove/force
-
-# Add or remove space after the first (type) in message specs
-# '-(int) f:(int)x;' vs '-(int)f:(int)x;'
-sp_after_oc_return_type                   = ignore   # ignore/add/remove/force
-
-# Add or remove space between '@selector' and '('
-# '@selector(msgName)' vs '@selector (msgName)'
-# Also applies to @protocol() constructs
-sp_after_oc_at_sel                        = ignore   # ignore/add/remove/force
-
-# Add or remove space between '@selector(x)' and the following word
-# '@selector(foo) a:' vs '@selector(foo)a:'
-sp_after_oc_at_sel_parens                 = ignore   # ignore/add/remove/force
-
-# Add or remove space inside '@selector' parens
-# '@selector(foo)' vs '@selector( foo )'
-# Also applies to @protocol() constructs
-sp_inside_oc_at_sel_parens                = ignore   # ignore/add/remove/force
-
-# Add or remove space before a block pointer caret
-# '^int (int arg){...}' vs. ' ^int (int arg){...}'
-sp_before_oc_block_caret                  = ignore   # ignore/add/remove/force
-
-# Add or remove space after a block pointer caret
-# '^int (int arg){...}' vs. '^ int (int arg){...}'
-sp_after_oc_block_caret                   = ignore   # ignore/add/remove/force
-
-# Add or remove space between the receiver and selector in a message.
-# '[receiver selector ...]'
-sp_after_oc_msg_receiver                  = ignore   # ignore/add/remove/force
-
-# Add or remove space after @property.
-sp_after_oc_property                      = ignore   # ignore/add/remove/force
-
-# Add or remove space around the ':' in 'b ? t : f'
-sp_cond_colon                             = ignore   # ignore/add/remove/force
-
-# Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon.
-sp_cond_colon_before                      = ignore   # ignore/add/remove/force
-
-# Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon.
-sp_cond_colon_after                       = ignore   # ignore/add/remove/force
-
-# Add or remove space around the '?' in 'b ? t : f'
-sp_cond_question                          = ignore   # ignore/add/remove/force
-
-# Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question.
-sp_cond_question_before                   = ignore   # ignore/add/remove/force
-
-# Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question.
-sp_cond_question_after                    = ignore   # ignore/add/remove/force
-
-# In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options.
-sp_cond_ternary_short                     = ignore   # ignore/add/remove/force
-
-# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
-sp_case_label                             = ignore   # ignore/add/remove/force
-
-# Control the space around the D '..' operator.
-sp_range                                  = ignore   # ignore/add/remove/force
-
-# Control the spacing after ':' in 'for (TYPE VAR : EXPR)' (Java)
-sp_after_for_colon                        = ignore   # ignore/add/remove/force
-
-# Control the spacing before ':' in 'for (TYPE VAR : EXPR)' (Java)
-sp_before_for_colon                       = ignore   # ignore/add/remove/force
-
-# Control the spacing in 'extern (C)' (D)
-sp_extern_paren                           = ignore   # ignore/add/remove/force
-
-# Control the space after the opening of a C++ comment '// A' vs '//A'
-sp_cmt_cpp_start                          = ignore   # ignore/add/remove/force
-
-# Controls the spaces between #else or #endif and a trailing comment
-sp_endif_cmt                              = ignore   # ignore/add/remove/force
-
-# Controls the spaces after 'new', 'delete', and 'delete[]'
-sp_after_new                              = ignore   # ignore/add/remove/force
-
-# Controls the spaces before a trailing or embedded comment
-sp_before_tr_emb_cmt                      = ignore   # ignore/add/remove/force
-
-# Number of spaces before a trailing or embedded comment
-sp_num_before_tr_emb_cmt                  = 0        # number
-
-# Control space between a Java annotation and the open paren.
-sp_annotation_paren                       = ignore   # ignore/add/remove/force
-
-#
-# Code alignment (not left column spaces/tabs)
-#
-
-# Whether to keep non-indenting tabs
-align_keep_tabs                           = false    # false/true
-
-# Whether to use tabs for aligning
-align_with_tabs                           = false    # false/true
-
-# Whether to bump out to the next tab when aligning
-align_on_tabstop                          = false    # false/true
-
-# Whether to left-align numbers
-align_number_left                         = false    # false/true
-
-# Whether to keep whitespace not required for alignment.
-align_keep_extra_space                    = false    # false/true
-
-# Align variable definitions in prototypes and functions
-align_func_params                         = false    # false/true
-
-# Align parameters in single-line functions that have the same name.
-# The function names must already be aligned with each other.
-align_same_func_call_params               = false    # false/true
-
-# The span for aligning variable definitions (0=don't align)
-align_var_def_span                        = 0        # number
-
-# How to align the star in variable definitions.
-#  0=Part of the type     'void *   foo;'
-#  1=Part of the variable 'void     *foo;'
-#  2=Dangling             'void    *foo;'
-align_var_def_star_style                  = 0        # number
-
-# How to align the '&' in variable definitions.
-#  0=Part of the type
-#  1=Part of the variable
-#  2=Dangling
-align_var_def_amp_style                   = 0        # number
-
-# The threshold for aligning variable definitions (0=no limit)
-align_var_def_thresh                      = 0        # number
-
-# The gap for aligning variable definitions
-align_var_def_gap                         = 0        # number
-
-# Whether to align the colon in struct bit fields
-align_var_def_colon                       = false    # false/true
-
-# Whether to align any attribute after the variable name
-align_var_def_attribute                   = false    # false/true
-
-# Whether to align inline struct/enum/union variable definitions
-align_var_def_inline                      = false    # false/true
-
-# The span for aligning on '=' in assignments (0=don't align)
-align_assign_span                         = 0        # number
-
-# The threshold for aligning on '=' in assignments (0=no limit)
-align_assign_thresh                       = 0        # number
-
-# The span for aligning on '=' in enums (0=don't align)
-align_enum_equ_span                       = 0        # number
-
-# The threshold for aligning on '=' in enums (0=no limit)
-align_enum_equ_thresh                     = 0        # number
-
-# The span for aligning struct/union (0=don't align)
-align_var_struct_span                     = 0        # number
-
-# The threshold for aligning struct/union member definitions (0=no limit)
-align_var_struct_thresh                   = 0        # number
-
-# The gap for aligning struct/union member definitions
-align_var_struct_gap                      = 0        # number
-
-# The span for aligning struct initializer values (0=don't align)
-align_struct_init_span                    = 0        # number
-
-# The minimum space between the type and the synonym of a typedef
-align_typedef_gap                         = 0        # number
-
-# The span for aligning single-line typedefs (0=don't align)
-align_typedef_span                        = 0        # number
-
-# How to align typedef'd functions with other typedefs
-# 0: Don't mix them at all
-# 1: align the open paren with the types
-# 2: align the function type name with the other type names
-align_typedef_func                        = 0        # number
-
-# Controls the positioning of the '*' in typedefs. Just try it.
-# 0: Align on typedef type, ignore '*'
-# 1: The '*' is part of type name: typedef int  *pint;
-# 2: The '*' is part of the type, but dangling: typedef int *pint;
-align_typedef_star_style                  = 0        # number
-
-# Controls the positioning of the '&' in typedefs. Just try it.
-# 0: Align on typedef type, ignore '&'
-# 1: The '&' is part of type name: typedef int  &pint;
-# 2: The '&' is part of the type, but dangling: typedef int &pint;
-align_typedef_amp_style                   = 0        # number
-
-# The span for aligning comments that end lines (0=don't align)
-align_right_cmt_span                      = 0        # number
-
-# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment
-align_right_cmt_mix                       = false    # false/true
-
-# If a trailing comment is more than this number of columns away from the text it follows,
-# it will qualify for being aligned. This has to be > 0 to do anything.
-align_right_cmt_gap                       = 0        # number
-
-# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
-align_right_cmt_at_col                    = 0        # number
-
-# The span for aligning function prototypes (0=don't align)
-align_func_proto_span                     = 0        # number
-
-# Minimum gap between the return type and the function name.
-align_func_proto_gap                      = 0        # number
-
-# Align function protos on the 'operator' keyword instead of what follows
-align_on_operator                         = false    # false/true
-
-# Whether to mix aligning prototype and variable declarations.
-# If true, align_var_def_XXX options are used instead of align_func_proto_XXX options.
-align_mix_var_proto                       = false    # false/true
-
-# Align single-line functions with function prototypes, uses align_func_proto_span
-align_single_line_func                    = false    # false/true
-
-# Aligning the open brace of single-line functions.
-# Requires align_single_line_func=true, uses align_func_proto_span
-align_single_line_brace                   = false    # false/true
-
-# Gap for align_single_line_brace.
-align_single_line_brace_gap               = 0        # number
-
-# The span for aligning ObjC msg spec (0=don't align)
-align_oc_msg_spec_span                    = 0        # number
-
-# Whether to align macros wrapped with a backslash and a newline.
-# This will not work right if the macro contains a multi-line comment.
-align_nl_cont                             = false    # false/true
-
-# # Align macro functions and variables together
-align_pp_define_together                  = false    # false/true
-
-# The minimum space between label and value of a preprocessor define
-align_pp_define_gap                       = 0        # number
-
-# The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)
-align_pp_define_span                      = 0        # number
-
-# Align lines that start with '<<' with previous '<<'. Default=true
-align_left_shift                          = true     # false/true
-
-# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
-align_oc_msg_colon_span                   = 0        # number
-
-# If true, always align with the first parameter, even if it is too short.
-align_oc_msg_colon_first                  = false    # false/true
-
-# Aligning parameters in an Obj-C '+' or '-' declaration on the ':'
-align_oc_decl_colon                       = false    # false/true
-
-#
-# Newline adding and removing options
-#
-
-# Whether to collapse empty blocks between '{' and '}'
-nl_collapse_empty_body                    = false    # false/true
-
-# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'
-nl_assign_leave_one_liners                = false    # false/true
-
-# Don't split one-line braced statements inside a class xx { } body
-nl_class_leave_one_liners                 = false    # false/true
-
-# Don't split one-line enums: 'enum foo { BAR = 15 };'
-nl_enum_leave_one_liners                  = false    # false/true
-
-# Don't split one-line get or set functions
-nl_getset_leave_one_liners                = false    # false/true
-
-# Don't split one-line function definitions - 'int foo() { return 0; }'
-nl_func_leave_one_liners                  = false    # false/true
-
-# Don't split one-line C++11 lambdas - '[]() { return 0; }'
-nl_cpp_lambda_leave_one_liners            = false    # false/true
-
-# Don't split one-line if/else statements - 'if(a) b++;'
-nl_if_leave_one_liners                    = false    # false/true
-
-# Don't split one-line OC messages
-nl_oc_msg_leave_one_liner                 = false    # false/true
-
-# Add or remove newlines at the start of the file
-nl_start_of_file                          = ignore   # ignore/add/remove/force
-
-# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'
-nl_start_of_file_min                      = 0        # number
-
-# Add or remove newline at the end of the file
-nl_end_of_file                            = ignore   # ignore/add/remove/force
-
-# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')
-nl_end_of_file_min                        = 0        # number
-
-# Add or remove newline between '=' and '{'
-nl_assign_brace                           = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '=' and '[' (D only)
-nl_assign_square                          = ignore   # ignore/add/remove/force
-
-# Add or remove newline after '= [' (D only). Will also affect the newline before the ']'
-nl_after_square_assign                    = ignore   # ignore/add/remove/force
-
-# The number of blank lines after a block of variable definitions at the top of a function body
-# 0 = No change (default)
-nl_func_var_def_blk                       = 0        # number
-
-# The number of newlines before a block of typedefs
-# 0 = No change (default)
-nl_typedef_blk_start                      = 0        # number
-
-# The number of newlines after a block of typedefs
-# 0 = No change (default)
-nl_typedef_blk_end                        = 0        # number
-
-# The maximum consecutive newlines within a block of typedefs
-# 0 = No change (default)
-nl_typedef_blk_in                         = 0        # number
-
-# The number of newlines before a block of variable definitions not at the top of a function body
-# 0 = No change (default)
-nl_var_def_blk_start                      = 0        # number
-
-# The number of newlines after a block of variable definitions not at the top of a function body
-# 0 = No change (default)
-nl_var_def_blk_end                        = 0        # number
-
-# The maximum consecutive newlines within a block of variable definitions
-# 0 = No change (default)
-nl_var_def_blk_in                         = 0        # number
-
-# Add or remove newline between a function call's ')' and '{', as in:
-# list_for_each(item, &list) { }
-nl_fcall_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'enum' and '{'
-nl_enum_brace                             = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'struct and '{'
-nl_struct_brace                           = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'union' and '{'
-nl_union_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'if' and '{'
-nl_if_brace                               = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'else'
-nl_brace_else                             = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'else if' and '{'
-# If set to ignore, nl_if_brace is used instead
-nl_elseif_brace                           = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'else' and '{'
-nl_else_brace                             = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'else' and 'if'
-nl_else_if                                = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'finally'
-nl_brace_finally                          = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'finally' and '{'
-nl_finally_brace                          = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'try' and '{'
-nl_try_brace                              = ignore   # ignore/add/remove/force
-
-# Add or remove newline between get/set and '{'
-nl_getset_brace                           = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'for' and '{'
-nl_for_brace                              = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'catch' and '{'
-nl_catch_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'catch'
-nl_brace_catch                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '}' and ']'
-nl_brace_square                           = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '}' and ')' in a function invocation
-nl_brace_fparen                           = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'while' and '{'
-nl_while_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'scope (x)' and '{' (D)
-nl_scope_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'unittest' and '{' (D)
-nl_unittest_brace                         = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'version (x)' and '{' (D)
-nl_version_brace                          = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'using' and '{'
-nl_using_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between two open or close braces.
-# Due to general newline/brace handling, REMOVE may not work.
-nl_brace_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'do' and '{'
-nl_do_brace                               = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'while' of 'do' statement
-nl_brace_while                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'switch' and '{'
-nl_switch_brace                           = ignore   # ignore/add/remove/force
-
-# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
-# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace.
-nl_multi_line_cond                        = false    # false/true
-
-# Force a newline in a define after the macro name for multi-line defines.
-nl_multi_line_define                      = false    # false/true
-
-# Whether to put a newline before 'case' statement
-nl_before_case                            = false    # false/true
-
-# Add or remove newline between ')' and 'throw'
-nl_before_throw                           = ignore   # ignore/add/remove/force
-
-# Whether to put a newline after 'case' statement
-nl_after_case                             = false    # false/true
-
-# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
-nl_case_colon_brace                       = ignore   # ignore/add/remove/force
-
-# Newline between namespace and {
-nl_namespace_brace                        = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'template<>' and whatever follows.
-nl_template_class                         = ignore   # ignore/add/remove/force
-
-# Add or remove newline between 'class' and '{'
-nl_class_brace                            = ignore   # ignore/add/remove/force
-
-# Add or remove newline after each ',' in the class base list
-nl_class_init_args                        = ignore   # ignore/add/remove/force
-
-# Add or remove newline after each ',' in the constructor member initialization
-nl_constr_init_args                       = ignore   # ignore/add/remove/force
-
-# Add or remove newline between return type and function name in a function definition
-nl_func_type_name                         = ignore   # ignore/add/remove/force
-
-# Add or remove newline between return type and function name inside a class {}
-# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
-nl_func_type_name_class                   = ignore   # ignore/add/remove/force
-
-# Add or remove newline between function scope and name in a definition
-# Controls the newline after '::' in 'void A::f() { }'
-nl_func_scope_name                        = ignore   # ignore/add/remove/force
-
-# Add or remove newline between return type and function name in a prototype
-nl_func_proto_type_name                   = ignore   # ignore/add/remove/force
-
-# Add or remove newline between a function name and the opening '('
-nl_func_paren                             = ignore   # ignore/add/remove/force
-
-# Add or remove newline between a function name and the opening '(' in the definition
-nl_func_def_paren                         = ignore   # ignore/add/remove/force
-
-# Add or remove newline after '(' in a function declaration
-nl_func_decl_start                        = ignore   # ignore/add/remove/force
-
-# Add or remove newline after '(' in a function definition
-nl_func_def_start                         = ignore   # ignore/add/remove/force
-
-# Overrides nl_func_decl_start when there is only one parameter.
-nl_func_decl_start_single                 = ignore   # ignore/add/remove/force
-
-# Overrides nl_func_def_start when there is only one parameter.
-nl_func_def_start_single                  = ignore   # ignore/add/remove/force
-
-# Add or remove newline after each ',' in a function declaration
-nl_func_decl_args                         = ignore   # ignore/add/remove/force
-
-# Add or remove newline after each ',' in a function definition
-nl_func_def_args                          = ignore   # ignore/add/remove/force
-
-# Add or remove newline before the ')' in a function declaration
-nl_func_decl_end                          = ignore   # ignore/add/remove/force
-
-# Add or remove newline before the ')' in a function definition
-nl_func_def_end                           = ignore   # ignore/add/remove/force
-
-# Overrides nl_func_decl_end when there is only one parameter.
-nl_func_decl_end_single                   = ignore   # ignore/add/remove/force
-
-# Overrides nl_func_def_end when there is only one parameter.
-nl_func_def_end_single                    = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '()' in a function declaration.
-nl_func_decl_empty                        = ignore   # ignore/add/remove/force
-
-# Add or remove newline between '()' in a function definition.
-nl_func_def_empty                         = ignore   # ignore/add/remove/force
-
-# Whether to put each OC message parameter on a separate line
-# See nl_oc_msg_leave_one_liner
-nl_oc_msg_args                            = false    # false/true
-
-# Add or remove newline between function signature and '{'
-nl_fdef_brace                             = ignore   # ignore/add/remove/force
-
-# Add or remove newline between C++11 lambda signature and '{'
-nl_cpp_ldef_brace                         = ignore   # ignore/add/remove/force
-
-# Add or remove a newline between the return keyword and return expression.
-nl_return_expr                            = ignore   # ignore/add/remove/force
-
-# Whether to put a newline after semicolons, except in 'for' statements
-nl_after_semicolon                        = false    # false/true
-
-# Java: Control the newline between the ')' and '{{' of the double brace initializer.
-nl_paren_dbrace_open                      = ignore   # ignore/add/remove/force
-
-# Whether to put a newline after brace open.
-# This also adds a newline before the matching brace close.
-nl_after_brace_open                       = false    # false/true
-
-# If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
-# placed between the open brace and a trailing single-line comment.
-nl_after_brace_open_cmt                   = false    # false/true
-
-# Whether to put a newline after a virtual brace open with a non-empty body.
-# These occur in un-braced if/while/do/for statement bodies.
-nl_after_vbrace_open                      = false    # false/true
-
-# Whether to put a newline after a virtual brace open with an empty body.
-# These occur in un-braced if/while/do/for statement bodies.
-nl_after_vbrace_open_empty                = false    # false/true
-
-# Whether to put a newline after a brace close.
-# Does not apply if followed by a necessary ';'.
-nl_after_brace_close                      = false    # false/true
-
-# Whether to put a newline after a virtual brace close.
-# Would add a newline before return in: 'if (foo) a++; return;'
-nl_after_vbrace_close                     = false    # false/true
-
-# Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
-# Affects enums, unions, and structures. If set to ignore, uses nl_after_brace_close
-nl_brace_struct_var                       = ignore   # ignore/add/remove/force
-
-# Whether to alter newlines in '#define' macros
-nl_define_macro                           = false    # false/true
-
-# Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'
-nl_squeeze_ifdef                          = false    # false/true
-
-# Add or remove blank line before 'if'
-nl_before_if                              = ignore   # ignore/add/remove/force
-
-# Add or remove blank line after 'if' statement
-nl_after_if                               = remove   # ignore/add/remove/force
-
-# Add or remove blank line before 'for'
-nl_before_for                             = ignore   # ignore/add/remove/force
-
-# Add or remove blank line after 'for' statement
-nl_after_for                              = remove   # ignore/add/remove/force
-
-# Add or remove blank line before 'while'
-nl_before_while                           = ignore   # ignore/add/remove/force
-
-# Add or remove blank line after 'while' statement
-nl_after_while                            = ignore   # ignore/add/remove/force
-
-# Add or remove blank line before 'switch'
-nl_before_switch                          = ignore   # ignore/add/remove/force
-
-# Add or remove blank line after 'switch' statement
-nl_after_switch                           = ignore   # ignore/add/remove/force
-
-# Add or remove blank line before 'do'
-nl_before_do                              = ignore   # ignore/add/remove/force
-
-# Add or remove blank line after 'do/while' statement
-nl_after_do                               = ignore   # ignore/add/remove/force
-
-# Whether to double-space commented-entries in struct/enum
-nl_ds_struct_enum_cmt                     = false    # false/true
-
-# Whether to double-space before the close brace of a struct/union/enum
-# (lower priority than 'eat_blanks_before_close_brace')
-nl_ds_struct_enum_close_brace             = false    # false/true
-
-# Add or remove a newline around a class colon.
-# Related to pos_class_colon, nl_class_init_args, and pos_class_comma.
-nl_class_colon                            = ignore   # ignore/add/remove/force
-
-# Add or remove a newline around a class constructor colon.
-# Related to pos_constr_colon, nl_constr_init_args, and pos_constr_comma.
-nl_constr_colon                           = ignore   # ignore/add/remove/force
-
-# Change simple unbraced if statements into a one-liner
-# 'if(b)\n i++;' => 'if(b) i++;'
-nl_create_if_one_liner                    = false    # false/true
-
-# Change simple unbraced for statements into a one-liner
-# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'
-nl_create_for_one_liner                   = false    # false/true
-
-# Change simple unbraced while statements into a one-liner
-# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'
-nl_create_while_one_liner                 = false    # false/true
-
-#
-# Positioning options
-#
-
-# The position of arithmetic operators in wrapped expressions
-pos_arith                                 = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of assignment in wrapped expressions.
-# Do not affect '=' followed by '{'
-pos_assign                                = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of boolean operators in wrapped expressions
-pos_bool                                  = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of comparison operators in wrapped expressions
-pos_compare                               = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of conditional (b ? t : f) operators in wrapped expressions
-pos_conditional                           = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of the comma in wrapped expressions
-pos_comma                                 = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of the comma in the class base list
-pos_class_comma                           = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of the comma in the constructor initialization list
-pos_constr_comma                          = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of colons between class and base class list
-pos_class_colon                           = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of colons between constructor and member initialization
-pos_constr_colon                          = ignore   # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-#
-# Line Splitting options
-#
-
-# Try to limit code width to N number of columns
-code_width                                = 0        # number
-
-# Whether to fully split long 'for' statements at semi-colons
-ls_for_split_full                         = false    # false/true
-
-# Whether to fully split long function protos/calls at commas
-ls_func_split_full                        = false    # false/true
-
-# Whether to split lines as close to code_width as possible and ignore some groupings
-ls_code_width                             = false    # false/true
-
-#
-# Blank line options
-#
-
-# The maximum consecutive newlines
-nl_max                                    = 0        # number
-
-# The number of newlines after a function prototype, if followed by another function prototype
-nl_after_func_proto                       = 0        # number
-
-# The number of newlines after a function prototype, if not followed by another function prototype
-nl_after_func_proto_group                 = 0        # number
-
-# The number of newlines after '}' of a multi-line function body
-nl_after_func_body                        = 0        # number
-
-# The number of newlines after '}' of a multi-line function body in a class declaration
-nl_after_func_body_class                  = 0        # number
-
-# The number of newlines after '}' of a single line function body
-nl_after_func_body_one_liner              = 0        # number
-
-# The minimum number of newlines before a multi-line comment.
-# Doesn't apply if after a brace open or another multi-line comment.
-nl_before_block_comment                   = 0        # number
-
-# The minimum number of newlines before a single-line C comment.
-# Doesn't apply if after a brace open or other single-line C comments.
-nl_before_c_comment                       = 0        # number
-
-# The minimum number of newlines before a CPP comment.
-# Doesn't apply if after a brace open or other CPP comments.
-nl_before_cpp_comment                     = 0        # number
-
-# Whether to force a newline after a multi-line comment.
-nl_after_multiline_comment                = false    # false/true
-
-# The number of newlines after '}' or ';' of a struct/enum/union definition
-nl_after_struct                           = 0        # number
-
-# The number of newlines after '}' or ';' of a class definition
-nl_after_class                            = 0        # number
-
-# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
-# Will not change the newline count if after a brace open.
-# 0 = No change.
-nl_before_access_spec                     = 0        # number
-
-# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
-# 0 = No change.
-nl_after_access_spec                      = 0        # number
-
-# The number of newlines between a function def and the function comment.
-# 0 = No change.
-nl_comment_func_def                       = 0        # number
-
-# The number of newlines after a try-catch-finally block that isn't followed by a brace close.
-# 0 = No change.
-nl_after_try_catch_finally                = 0        # number
-
-# The number of newlines before and after a property, indexer or event decl.
-# 0 = No change.
-nl_around_cs_property                     = 0        # number
-
-# The number of newlines between the get/set/add/remove handlers in C#.
-# 0 = No change.
-nl_between_get_set                        = 0        # number
-
-# Add or remove newline between C# property and the '{'
-nl_property_brace                         = ignore   # ignore/add/remove/force
-
-# Whether to remove blank lines after '{'
-eat_blanks_after_open_brace               = false    # false/true
-
-# Whether to remove blank lines before '}'
-eat_blanks_before_close_brace             = false    # false/true
-
-# How aggressively to remove extra newlines not in preproc.
-# 0: No change
-# 1: Remove most newlines not handled by other config
-# 2: Remove all newlines and reformat completely by config
-nl_remove_extra_newlines                  = 0        # number
-
-# Whether to put a blank line before 'return' statements, unless after an open brace.
-nl_before_return                          = false    # false/true
-
-# Whether to put a blank line after 'return' statements, unless followed by a close brace.
-nl_after_return                           = false    # false/true
-
-# Whether to put a newline after a Java annotation statement.
-# Only affects annotations that are after a newline.
-nl_after_annotation                       = ignore   # ignore/add/remove/force
-
-# Controls the newline between two annotations.
-nl_between_annotation                     = ignore   # ignore/add/remove/force
-
-#
-# Code modifying options (non-whitespace)
-#
-
-# Add or remove braces on single-line 'do' statement
-mod_full_brace_do                         = ignore   # ignore/add/remove/force
-
-# Add or remove braces on single-line 'for' statement
-mod_full_brace_for                        = ignore   # ignore/add/remove/force
-
-# Add or remove braces on single-line function definitions. (Pawn)
-mod_full_brace_function                   = ignore   # ignore/add/remove/force
-
-# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
-mod_full_brace_if                         = ignore   # ignore/add/remove/force
-
-# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
-# If any must be braced, they are all braced.  If all can be unbraced, then the braces are removed.
-mod_full_brace_if_chain                   = false    # false/true
-
-# Don't remove braces around statements that span N newlines
-mod_full_brace_nl                         = 0        # number
-
-# Add or remove braces on single-line 'while' statement
-mod_full_brace_while                      = ignore   # ignore/add/remove/force
-
-# Add or remove braces on single-line 'using ()' statement
-mod_full_brace_using                      = ignore   # ignore/add/remove/force
-
-# Add or remove unnecessary paren on 'return' statement
-mod_paren_on_return                       = ignore   # ignore/add/remove/force
-
-# Whether to change optional semicolons to real semicolons
-mod_pawn_semicolon                        = false    # false/true
-
-# Add parens on 'while' and 'if' statement around bools
-mod_full_paren_if_bool                    = false    # false/true
-
-# Whether to remove superfluous semicolons
-mod_remove_extra_semicolon                = true    # false/true
-
-# If a function body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_function_closebrace_comment  = 0        # number
-
-# If a namespace body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_namespace_closebrace_comment = 0        # number
-
-# If a switch body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_switch_closebrace_comment    = 0        # number
-
-# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
-# the #endif, a comment will be added.
-mod_add_long_ifdef_endif_comment          = 0        # number
-
-# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
-# the #else, a comment will be added.
-mod_add_long_ifdef_else_comment           = 0        # number
-
-# If TRUE, will sort consecutive single-line 'import' statements [Java, D]
-mod_sort_import                           = false    # false/true
-
-# If TRUE, will sort consecutive single-line 'using' statements [C#]
-mod_sort_using                            = false    # false/true
-
-# If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
-# This is generally a bad idea, as it may break your code.
-mod_sort_include                          = false    # false/true
-
-# If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace.
-mod_move_case_break                       = false    # false/true
-
-# Will add or remove the braces around a fully braced case statement.
-# Will only remove the braces if there are no variable declarations in the block.
-mod_case_brace                            = ignore   # ignore/add/remove/force
-
-# If TRUE, it will remove a void 'return;' that appears as the last statement in a function.
-mod_remove_empty_return                   = false    # false/true
-
-#
-# Comment modifications
-#
-
-# Try to wrap comments at cmt_width columns
-cmt_width                                 = 0        # number
-
-# Set the comment reflow mode (default: 0)
-# 0: no reflowing (apart from the line wrapping due to cmt_width)
-# 1: no touching at all
-# 2: full reflow
-cmt_reflow_mode                           = 0        # number
-
-# Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.
-cmt_convert_tab_to_spaces                 = false    # false/true
-
-# If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars.
-# Default is true.
-cmt_indent_multi                          = false    # false/true
-
-# Whether to group c-comments that look like they are in a block
-cmt_c_group                               = false    # false/true
-
-# Whether to put an empty '/*' on the first line of the combined c-comment
-cmt_c_nl_start                            = false    # false/true
-
-# Whether to put a newline before the closing '*/' of the combined c-comment
-cmt_c_nl_end                              = false    # false/true
-
-# Whether to group cpp-comments that look like they are in a block
-cmt_cpp_group                             = false    # false/true
-
-# Whether to put an empty '/*' on the first line of the combined cpp-comment
-cmt_cpp_nl_start                          = false    # false/true
-
-# Whether to put a newline before the closing '*/' of the combined cpp-comment
-cmt_cpp_nl_end                            = false    # false/true
-
-# Whether to change cpp-comments into c-comments
-cmt_cpp_to_c                              = false    # false/true
-
-# Whether to put a star on subsequent comment lines
-cmt_star_cont                             = false    # false/true
-
-# The number of spaces to insert at the start of subsequent comment lines
-cmt_sp_before_star_cont                   = 0        # number
-
-# The number of spaces to insert after the star on subsequent comment lines
-cmt_sp_after_star_cont                    = 0        # number
-
-# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
-# the comment are the same length. Default=True
-cmt_multi_check_last                      = true     # false/true
-
-# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
-# Will substitute $(filename) with the current file's name.
-cmt_insert_file_header                    = ""         # string
-
-# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
-# Will substitute $(filename) with the current file's name.
-cmt_insert_file_footer                    = ""         # string
-
-# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
-# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
-# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }
-cmt_insert_func_header                    = ""         # string
-
-# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
-# Will substitute $(class) with the class name.
-cmt_insert_class_header                   = ""         # string
-
-# The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
-# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
-cmt_insert_oc_msg_header                  = ""         # string
-
-# If a preprocessor is encountered when stepping backwards from a function name, then
-# this option decides whether the comment should be inserted.
-# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.
-cmt_insert_before_preproc                 = false    # false/true
-
-#
-# Preprocessor options
-#
-
-# Control indent of preprocessors inside #if blocks at brace level 0 (file-level)
-pp_indent                                 = ignore   # ignore/add/remove/force
-
-# Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false)
-pp_indent_at_level                        = false    # false/true
-
-# Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
-# If pp_indent_at_level=false, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
-# Default=1.
-pp_indent_count                           = 1        # number
-
-# Add or remove space after # based on pp_level of #if blocks
-pp_space                                  = ignore   # ignore/add/remove/force
-
-# Sets the number of spaces added with pp_space
-pp_space_count                            = 0        # number
-
-# The indent for #region and #endregion in C# and '#pragma region' in C/C++
-pp_indent_region                          = 0        # number
-
-# Whether to indent the code between #region and #endregion
-pp_region_indent_code                     = false    # false/true
-
-# If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level.
-# 0:  indent preprocessors using output_tab_size.
-# >0: column at which all preprocessors will be indented.
-pp_indent_if                              = 0        # number
-
-# Control whether to indent the code between #if, #else and #endif.
-pp_if_indent_code                         = false    # false/true
-
-# Whether to indent '#define' at the brace level (true) or from column 1 (false)
-pp_define_at_level                        = false    # false/true
-
-# You can force a token to be a type with the 'type' option.
-# Example:
-# type myfoo1 myfoo2
-#
-# You can create custom macro-based indentation using macro-open,
-# macro-else and macro-close.
-# Example:
-# macro-open  BEGIN_TEMPLATE_MESSAGE_MAP
-# macro-open  BEGIN_MESSAGE_MAP
-# macro-close END_MESSAGE_MAP
-#
-# You can assign any keyword to any type with the set option.
-# set func_call_user _ N_
-#
-# The full syntax description of all custom definition config entries
-# is shown below:
-#
-# define custom tokens as:
-# - embed whitespace in token using '' escape character, or
-#   put token in quotes
-# - these: ' " and ` are recognized as quote delimiters
-#
-# type token1 token2 token3 ...
-#             ^ optionally specify multiple tokens on a single line
-# define def_token output_token
-#                  ^ output_token is optional, then NULL is assumed
-# macro-open token
-# macro-close token
-# macro-else token
-# set id token1 token2 ...
-#               ^ optionally specify multiple tokens on a single line
-#     ^ id is one of the names in token_enum.h sans the CT_ prefix,
-#       e.g. PP_PRAGMA
-#
-# all tokens are separated by any mix of ',' commas, '=' equal signs
-# and whitespace (space, tab)
-#
-# You can add support for other file extensions using the 'file_ext' command.
-# The first arg is the language name used with the '-l' option.
-# The remaining args are file extensions, matched with 'endswith'.
-#   file_ext CPP .ch .cxx .cpp.in
-#