mini_exiftool_vendored 8.9.7.v2 → 9.2.7.v1

data/vendor/Image-ExifTool-9.27/lib/Image/ExifTool/WritePostScript.pl

@@ -0,0 +1,777 @@
+#------------------------------------------------------------------------------
+# File:         WritePostScript.pl
+#
+# Description:  Write PostScript meta information
+#
+# Revisions:    03/03/2006 - P. Harvey Created
+#
+# References:   (see references in PostScript.pm, plus:)
+#               1) http://www.adobe.com/products/postscript/pdfs/PLRM.pdf
+#               2) http://www-cdf.fnal.gov/offline/PostScript/PLRM2.pdf
+#               3) http://partners.adobe.com/public/developer/en/acrobat/sdk/pdf/pdf_creation_apis_and_specs/pdfmarkReference.pdf
+#               4) http://www.npes.org/standards/Tools/DCS20Spec.pdf
+#
+# Notes:        (see NOTES in POD doc below)
+#------------------------------------------------------------------------------
+
+package Image::ExifTool::PostScript;
+
+use strict;
+
+# Structure of a DSC PS/EPS document:
+#
+#   %!PS-Adobe-3.0     [plus " EPSF-3.0" for EPS]
+#     <comments>
+#   %%EndComments      [optional]
+#   %%BeginXxxx
+#     <stuff to ignore>
+#   %%EndXxxx
+#   %%BeginProlog
+#     <prolog stuff>
+#   %%EndProlog
+#   %%BeginSetup
+#     <setup stuff>
+#   %%EndSetup
+#   %ImageData x x x x  [written by Photoshop]
+#   %BeginPhotoshop: xxxx
+#     <ascii-hex IRB information>
+#   %EndPhotosop
+#   %%BeginICCProfile: (name) <num> <type>
+#     <ICC Profile info>
+#   %%EndICCProfile
+#   %begin_xml_code
+#     <postscript code to define and read the XMP stream object>
+#   %begin_xml_packet: xxxx
+#     <XMP data>
+#   %end_xml_packet
+#     <postscript code to add XMP stream to dictionary>
+#   %end_xml_code
+#   %%Page: x x         [PS only (optional?)]
+#     <graphics commands>
+#   %%PageTrailer
+#   %%Trailer
+#     <a bit more code to bracket EPS content for distiller>
+#   %%EOF
+
+# map of where information is stored in PS image
+my %psMap = (
+    XMP          => 'PostScript',
+    Photoshop    => 'PostScript',
+    IPTC         => 'Photoshop',
+    EXIFInfo     => 'Photoshop',
+    IFD0         => 'EXIFInfo',
+    IFD1         => 'IFD0',
+    ICC_Profile  => 'PostScript',
+    ExifIFD      => 'IFD0',
+    GPS          => 'IFD0',
+    SubIFD       => 'IFD0',
+    GlobParamIFD => 'IFD0',
+    PrintIM      => 'IFD0',
+    InteropIFD   => 'ExifIFD',
+    MakerNotes   => 'ExifIFD',
+);
+
+
+#------------------------------------------------------------------------------
+# Write XMP directory to file, with begin/end tokens if necessary
+# Inputs: 0) outfile ref, 1) flags hash ref, 2-N) data to write
+# Returns: true on success
+sub WriteXMPDir($$@)
+{
+    my $outfile = shift;
+    my $flags = shift;
+    my $success = 1;
+    Write($outfile, "%begin_xml_code$/") or $success = 0 unless $$flags{WROTE_BEGIN};
+    Write($outfile, @_) or $success = 0;
+    Write($outfile, "%end_xml_code$/") or $success = 0 unless $$flags{WROTE_BEGIN};
+    return $success;
+}
+
+#------------------------------------------------------------------------------
+# Write a directory inside a PS document
+# Inputs: 0) ExifTool object ref, 1) output file reference,
+#         2) Directory name, 3) data reference, 4) flags hash ref
+# Returns: 0=error, 1=nothing written, 2=dir written ok
+sub WritePSDirectory($$$$$)
+{
+    my ($exifTool, $outfile, $dirName, $dataPt, $flags) = @_;
+    my $success = 2;
+    my $len = $dataPt ? length($$dataPt) : 0;
+    my $create = $len ? 0 : 1;
+    my %dirInfo = (
+        DataPt => $dataPt,
+        DataLen => $len,
+        DirStart => 0,
+        DirLen => $len,
+        DirName => $dirName,
+        Parent => 'PostScript',
+    );
+    # Note: $$flags{WROTE_BEGIN} may be 1 for XMP (it is always 0 for
+    # other dirs, but if 1, the begin/end markers were already written)
+#
+# prepare necessary postscript code to support embedded XMP
+#
+    my ($beforeXMP, $afterXMP, $reportedLen);
+    if ($dirName eq 'XMP' and $len) {
+        # isolate the XMP
+        pos($$dataPt) = 0;
+        unless ($$dataPt =~ /(.*)(<\?xpacket begin=.{7,13}W5M0MpCehiHzreSzNTczkc9d)/sg) {
+            $exifTool->Warn('No XMP packet start');
+            return WriteXMPDir($outfile, $flags, $$dataPt);
+        }
+        $beforeXMP = $1;
+        my $xmp = $2;
+        my $p1 = pos($$dataPt);
+        unless ($$dataPt =~ m{<\?xpacket end=.(w|r).\?>}sg) {
+            $exifTool->Warn('No XMP packet end');
+            return WriteXMPDir($outfile, $flags, $$dataPt);
+        }
+        my $p2 = pos($$dataPt);
+        $xmp .= substr($$dataPt, $p1, $p2-$p1);
+        $afterXMP = substr($$dataPt, $p2);
+        # determine if we can adjust the XMP size
+        if ($beforeXMP =~ /%begin_xml_packet: (\d+)/s) {
+            $reportedLen = $1;
+            my @matches= ($beforeXMP =~ /\b$reportedLen\b/sg);
+            undef $reportedLen unless @matches == 2;
+        }
+        # must edit in place if we can't reliably change the XMP length
+        $dirInfo{InPlace} = 1 unless $reportedLen;
+        # process XMP only
+        $dirInfo{DataLen} = $dirInfo{DirLen} = length $xmp;
+        $dirInfo{DataPt} = \$xmp;
+    }
+    my $tagTablePtr = Image::ExifTool::GetTagTable("Image::ExifTool::${dirName}::Main");
+    my $val = $exifTool->WriteDirectory(\%dirInfo, $tagTablePtr);
+    if (defined $val) {
+        $dataPt = \$val;    # use modified directory
+        $len = length $val;
+    } elsif ($dirName eq 'XMP') {
+        return 1 unless $len;
+        # just write the original XMP
+        return WriteXMPDir($outfile, $flags, $$dataPt);
+    }
+    unless ($len) {
+        return 1 if $create or $dirName ne 'XMP';   # nothing to create
+        # it would be really difficult to delete the XMP,
+        # so instead we write a blank XMP record
+        $val = <<EMPTY_XMP;
+<?xpacket begin='' id='W5M0MpCehiHzreSzNTczkc9d'?>
+<x:xmpmeta xmlns:x='adobe:ns:meta/' x:xmptk='Image::ExifTool $Image::ExifTool::VERSION'>
+</x:xmpmeta>
+EMPTY_XMP
+        $val .= ((' ' x 100) . "\n") x 24 unless $exifTool->Options('Compact');
+        $val .= q{<?xpacket end='w'?>};
+        $dataPt = \$val;
+        $len = length $val;
+    }
+#
+# write XMP directory
+#
+    if ($dirName eq 'XMP') {
+        if ($create) {
+            # create necessary PS/EPS code to support XMP
+            $beforeXMP = <<HDR_END;
+/pdfmark where {pop true} {false} ifelse
+/currentdistillerparams where {pop currentdistillerparams
+/CoreDistVersion get 5000 ge } {false} ifelse
+and not {userdict /pdfmark /cleartomark load put} if
+[/NamespacePush pdfmark
+[/_objdef {exiftool_metadata_stream} /type /stream /OBJ pdfmark
+[{exiftool_metadata_stream} 2 dict begin /Type /Metadata def
+  /Subtype /XML def currentdict end /PUT pdfmark
+/MetadataString $len string def % exact length of metadata
+/TempString 100 string def
+/ConsumeMetadata {
+currentfile TempString readline pop pop
+currentfile MetadataString readstring pop pop
+} bind def
+ConsumeMetadata
+%begin_xml_packet: $len
+HDR_END
+            # note: use q() to get necessary linefeed before %end_xml_packet
+            $afterXMP = q(
+%end_xml_packet
+[{exiftool_metadata_stream} MetadataString /PUT pdfmark
+);
+            if ($$flags{EPS}) {
+                $afterXMP .= <<EPS_AFTER;
+[/Document 1 dict begin
+  /Metadata {exiftool_metadata_stream} def currentdict end /BDC pdfmark
+[/NamespacePop pdfmark
+EPS_AFTER
+                # write this at end of file
+                $$flags{TRAILER} = "[/EMC pdfmark$/";
+            } else { # PS
+                $afterXMP .= <<PS_AFTER;
+[{Catalog} {exiftool_metadata_stream} /Metadata pdfmark
+[/NamespacePop pdfmark
+PS_AFTER
+            }
+            $beforeXMP =~ s{\n}{$/}sg;  # use proper newline characters
+            $afterXMP =~ s{\n}{$/}sg;
+        } else {
+            # replace xmp size in PS code
+            $reportedLen and $beforeXMP =~ s/\b$reportedLen\b/$len/sg;
+        }
+        WriteXMPDir($outfile, $flags, $beforeXMP, $$dataPt, $afterXMP) or $success = 0;
+#
+# Write Photoshop or ICC_Profile directory
+#
+    } elsif ($dirName eq 'Photoshop' or $dirName eq 'ICC_Profile') {
+        my ($startToken, $endToken);
+        if ($dirName eq 'Photoshop') {
+            $startToken = "%BeginPhotoshop: $len";
+            $endToken = '%EndPhotoshop';
+        } else {
+            $startToken = '%%BeginICCProfile: (Photoshop Profile) -1 Hex';
+            $endToken = '%%EndICCProfile';
+        }
+        Write($outfile, $startToken, $/) or $success = 0;
+        # write as an ASCII-hex comment
+        my $i;
+        my $wid = 32;
+        for ($i=0; $i<$len; $i+=$wid) {
+            $wid > $len-$i and $wid = $len-$i;
+            my $dat = substr($$dataPt, $i, $wid);
+            Write($outfile, "% ", uc(unpack('H*',$dat)), $/) or $success = 0;
+        }
+        Write($outfile, $endToken, $/) or $success = 0;
+    } else {
+        $exifTool->Warn("Can't write PS directory $dirName");
+    }
+    undef $val;
+    return $success;
+}
+
+#------------------------------------------------------------------------------
+# Encode postscript tag/value
+# Inputs: 0) tag ID, 1) value
+# Returns: postscript comment
+# - adds brackets, escapes special characters, and limits line length
+sub EncodeTag($$)
+{
+    my ($tag, $val) = @_;
+    unless ($val =~ /^\d+$/) {
+        $val =~ s/([()\\])/\\$1/g;  # escape brackets and backslashes
+        $val =~ s/\n/\\n/g;         # escape newlines
+        $val =~ s/\r/\\r/g;         # escape carriage returns
+        $val =~ s/\t/\\t/g;         # escape tabs
+        # use octal escape codes for other control characters
+        $val =~ s/([\x00-\x1f\x7f\xff])/sprintf("\\%.3o",ord($1))/ge;
+        $val = "($val)";
+    }
+    my $line = "%%$tag: $val";
+    # postscript line limit is 255 characters (but it seems that
+    # the limit may be 254 characters if the DOS CR/LF is used)
+    # --> split if necessary using continuation comment "%%+"
+    my $n;
+    for ($n=254; length($line)>$n; $n+=254+length($/)) {
+        substr($line, $n, 0) = "$/%%+";
+    }
+    return $line . $/;
+}
+
+#------------------------------------------------------------------------------
+# Write new tags information in comments section
+# Inputs: 0) ExifTool object ref, 1) output file ref, 2) reference to new tag hash
+# Returns: true on success
+sub WriteNewTags($$$)
+{
+    my ($exifTool, $outfile, $newTags) = @_;
+    my $success = 1;
+    my $tag;
+
+    # get XMP hint and remove from tags hash
+    my $xmpHint = $$newTags{XMP_HINT};
+    delete $$newTags{XMP_HINT};
+
+    foreach $tag (sort keys %$newTags) {
+        my $tagInfo = $$newTags{$tag};
+        my $nvHash = $exifTool->GetNewValueHash($tagInfo);
+        next unless $$nvHash{IsCreating};
+        my $val = $exifTool->GetNewValues($nvHash);
+        $exifTool->VerboseValue("+ PostScript:$$tagInfo{Name}", $val);
+        Write($outfile, EncodeTag($tag, $val)) or $success = 0;
+        ++$exifTool->{CHANGED};
+    }
+    # write XMP hint if necessary
+    Write($outfile, "%ADO_ContainsXMP: MainFirst$/") or $success = 0 if $xmpHint;
+
+    %$newTags = ();     # all done with new tags
+    return $success;
+}
+
+#------------------------------------------------------------------------------
+# check to be sure we haven't read past end of PS data in DOS-style file
+# Inputs: 0) RAF ref, 1) pointer to end of PS, 2) data
+# - modifies data and sets RAF to EOF if end of PS is reached
+sub CheckPSEnd($$$)
+{
+    my $pos = $_[0]->Tell();
+    if ($pos >= $_[1]) {
+        $_[0]->Seek(0, 2);   # seek to end of file so we can't read any more
+        $_[2] = substr($_[2], 0, length($_[2]) - $pos + $_[1]) if $pos > $_[1];
+    }
+}
+
+#------------------------------------------------------------------------------
+# Split into lines ending in any CR, LF or CR+LF combination
+# (this is annoying, and could be avoided if EPS files didn't mix linefeeds!)
+# Inputs: 0) data pointer, 1) reference to lines array
+# Notes: Updates data to contain next line and fills list with remaining lines
+sub SplitLine($$)
+{
+    my ($dataPt, $lines) = @_;
+    for (;;) {
+        my $endl;
+        # find the position of the first LF (\x0a)
+        $endl = pos($$dataPt), pos($$dataPt) = 0 if $$dataPt =~ /\x0a/g;
+        if ($$dataPt =~ /\x0d/g) { # find the first CR (\x0d)
+            if (defined $endl) {
+                # (remember, CR+LF is a DOS newline...)
+                $endl = pos($$dataPt) if pos($$dataPt) < $endl - 1;
+            } else {
+                $endl = pos($$dataPt);
+            }
+        } elsif (not defined $endl) {
+            push @$lines, $$dataPt;
+            last;
+        }
+        # split into separate lines
+        if (length $$dataPt == $endl) {
+            push @$lines, $$dataPt;
+            last;
+        } else {
+            push @$lines, substr($$dataPt, 0, $endl);
+            $$dataPt = substr($$dataPt, $endl);
+        }
+    }
+    $$dataPt = shift @$lines;   # set $$dataPt to first line
+}
+
+#------------------------------------------------------------------------------
+# Write PS file
+# Inputs: 0) ExifTool object reference, 1) source dirInfo reference
+# Returns: 1 on success, 0 if this wasn't a valid PS file,
+#          or -1 if a write error occurred
+sub WritePS($$)
+{
+    my ($exifTool, $dirInfo) = @_;
+    $exifTool or return 1;    # allow dummy access to autoload this package
+    my $tagTablePtr = Image::ExifTool::GetTagTable('Image::ExifTool::PostScript::Main');
+    my $raf = $$dirInfo{RAF};
+    my $outfile = $$dirInfo{OutFile};
+    my $verbose = $exifTool->Options('Verbose');
+    my $out = $exifTool->Options('TextOut');
+    my ($data, $buff, %flags, $err, $mode, $endToken);
+    my ($dos, $psStart, $psEnd, $psNewStart, $xmpHint);
+
+    $raf->Read($data, 4) == 4 or return 0;
+    return 0 unless $data =~ /^(%!PS|%!Ad|\xc5\xd0\xd3\xc6)/;
+
+    if ($data =~ /^%!Ad/) {
+        # I've seen PS files start with "%!Adobe-PS"...
+        return 0 unless $raf->Read($buff, 6) == 6 and $buff eq "obe-PS";
+        $data .= $buff;
+
+    } elsif ($data =~ /^\xc5\xd0\xd3\xc6/) {
+#
+# process DOS binary PS files
+#
+        # save DOS header then seek ahead and check PS header
+        $raf->Read($dos, 26) == 26 or return 0;
+        $dos = $data . $dos;
+        SetByteOrder('II');
+        $psStart = Get32u(\$dos, 4);
+        unless ($raf->Seek($psStart, 0) and
+                $raf->Read($data, 4) == 4 and $data eq '%!PS')
+        {
+            $exifTool->Error('Invalid PS header');
+            return 1;
+        }
+        $psEnd = $psStart + Get32u(\$dos, 8);
+        my $base = Get32u(\$dos, 20);
+        Set16u(0xffff, \$dos, 28);  # ignore checksum
+        if ($base) {
+            my %dirInfo = (
+                Parent => 'PS',
+                RAF => $raf,
+                Base => $base,
+                NoTiffEnd => 1, # no end-of-TIFF check
+            );
+            $buff = $exifTool->WriteTIFF(\%dirInfo);
+            SetByteOrder('II'); # (WriteTIFF may change this)
+            if ($buff) {
+                $buff = substr($buff, $base);   # remove header written by WriteTIFF()
+            } else {
+                # error rewriting TIFF, so just copy over original data
+                my $len = Get32u(\$dos, 24);
+                unless ($raf->Seek($base, 0) and $raf->Read($buff, $len) == $len) {
+                    $exifTool->Error('Error reading embedded TIFF');
+                    return 1;
+                }
+                $exifTool->Warn('Bad embedded TIFF');
+            }
+            Set32u(0, \$dos, 12);                   # zero metafile pointer
+            Set32u(0, \$dos, 16);                   # zero metafile length
+            Set32u(length($dos), \$dos, 20);        # set TIFF pointer
+            Set32u(length($buff), \$dos, 24);       # set TIFF length
+        } elsif (($base = Get32u(\$dos, 12)) != 0) {
+            # copy over metafile section
+            my $len = Get32u(\$dos, 16);
+            unless ($raf->Seek($base, 0) and $raf->Read($buff, $len) == $len) {
+                $exifTool->Error('Error reading metafile section');
+                return 1;
+            }
+            Set32u(length($dos), \$dos, 12);        # set metafile pointer
+        } else {
+            $buff = '';
+        }
+        $psNewStart = length($dos) + length($buff);
+        Set32u($psNewStart, \$dos, 4);  # set pointer to start of PS
+        Write($outfile, $dos, $buff) or $err = 1;
+        $raf->Seek($psStart + 4, 0);    # seek back to where we were
+    }
+#
+# rewrite PostScript data
+#
+    local $/ = GetInputRecordSeparator($raf);
+    unless ($/ and $raf->ReadLine($buff)) {
+        $exifTool->Error('Invalid PostScript data');
+        return 1;
+    }
+    $data .= $buff;
+    unless ($data =~ /^%!PS-Adobe-3\.(\d+)\b/ and $1 < 2) {
+        if ($exifTool->Error("Document does not conform to DSC spec. Metadata may be unreadable by other apps", 2)) {
+            return 1;
+        }
+    }
+    my $psRev = $1; # save PS revision number (3.x)
+    Write($outfile, $data) or $err = 1;
+    $flags{EPS} = 1 if $data =~ /EPSF/;
+
+    # get hash of new information keyed by tagID and directories to add/edit
+    my $newTags = $exifTool->GetNewTagInfoHash($tagTablePtr);
+
+    # figure out which directories we need to write (PostScript takes priority)
+    $exifTool->InitWriteDirs(\%psMap, 'PostScript');
+    my $addDirs = $exifTool->{ADD_DIRS};
+    my $editDirs = $exifTool->{EDIT_DIRS};
+    my %doneDir;
+
+    # set XMP hint flag (1 for adding, 0 for deleting, undef for no change)
+    $xmpHint = 1 if $$addDirs{XMP};
+    $xmpHint = 0 if $$exifTool{DEL_GROUP}{XMP};
+    $$newTags{XMP_HINT} = $xmpHint if $xmpHint;  # add special tag to newTags list
+
+    my (@lines, $changedNL);
+    my $altnl = ($/ eq "\x0d") ? "\x0a" : "\x0d";
+
+    for (;;) {
+        if (@lines) {
+            $data = shift @lines;
+        } else {
+            $raf->ReadLine($data) or last;
+            $dos and CheckPSEnd($raf, $psEnd, $data);
+            # split line if it contains other newline sequences
+            if ($data =~ /$altnl/) {
+                if (length($data) > 500000 and IsPC()) {
+                    # patch for Windows memory problem
+                    unless ($changedNL) {
+                        $changedNL = 1;
+                        my $t = $/;
+                        $/ = $altnl;
+                        $altnl = $t;
+                        $raf->Seek(-length($data), 1);
+                        next;
+                    }
+                } else {
+                    # split into separate lines
+                    SplitLine(\$data, \@lines);
+                }
+            }
+        }
+        undef $changedNL;
+        if ($endToken) {
+            # look for end token
+            if ($data =~ m/^$endToken\s*$/is) {
+                undef $endToken;
+                # found end: process this information
+                if ($mode) {
+                    $doneDir{$mode} and $exifTool->Error("Multiple $mode directories", 1);
+                    $doneDir{$mode} = 1;
+                    WritePSDirectory($exifTool, $outfile, $mode, \$buff, \%flags) or $err = 1;
+                    # write end token if we wrote the begin token
+                    Write($outfile, $data) or $err = 1 if $flags{WROTE_BEGIN};
+                    undef $buff;
+                } else {
+                    Write($outfile, $data) or $err = 1;
+                }
+            } else {
+                # buffer data in current begin/end block
+                if (not defined $mode) {
+                    # pick up XMP in unrecognized blocks for editing in place
+                    if ($data =~ /^<\?xpacket begin=.{7,13}W5M0MpCehiHzreSzNTczkc9d/ and
+                        $$editDirs{XMP})
+                    {
+                        $buff = $data;
+                        $mode = 'XMP';
+                    } else {
+                        Write($outfile, $data) or $err = 1;
+                    }
+                } elsif ($mode eq 'XMP') {
+                    $buff .= $data;
+                } else {
+                    # data is ASCII-hex encoded
+                    $data =~ tr/0-9A-Fa-f//dc;  # remove all but hex characters
+                    $buff .= pack('H*', $data); # translate from hex
+                }
+            }
+            next;
+        } elsif ($data =~ m{^(%{1,2})(Begin)(?!Object:)(.*?)[:\x0d\x0a]}i) {
+            # comments section is over... write any new tags now
+            WriteNewTags($exifTool, $outfile, $newTags) or $err = 1 if %$newTags;
+            undef $xmpHint;
+            # the beginning of a data block (can only write XMP and Photoshop)
+            my %modeLookup = (
+                _xml_code => 'XMP',
+                photoshop => 'Photoshop',
+                iccprofile => 'ICC_Profile',
+            );
+            $verbose > 1 and print $out "$2$3\n";
+            $endToken = $1 . ($2 eq 'begin' ? 'end' : 'End') . $3;
+            $mode = $modeLookup{lc($3)};
+            if ($mode and $$editDirs{$mode}) {
+                $buff = '';     # initialize buffer for this block
+                $flags{WROTE_BEGIN} = 0;
+            } else {
+                undef $mode;    # not editing this directory
+                Write($outfile, $data) or $err = 1;
+                $flags{WROTE_BEGIN} = 1;
+            }
+            next;
+        } elsif ($data =~ /^%%(?!Page:|PlateFile:|BeginObject:)(\w+): ?(.*)/s) {
+            # rewrite information from PostScript tags in comments
+            my ($tag, $val) = ($1, $2);
+            # handle Adobe Illustrator files specially
+            # - EVENTUALLY IT WOULD BE BETTER TO FIND ANOTHER IDENTIFICATION METHOD
+            #   (because Illustrator doesn't care if the Creator is changed)
+            if ($tag eq 'Creator' and $val =~ /^Adobe Illustrator/) {
+                # disable writing XMP to PS-format Adobe Illustrator files and
+                # older Illustrator EPS files becaues it confuses Illustrator
+                # (Illustrator 8 and older write PS-Adobe-3.0, newer write PS-Adobe-3.1)
+                if ($$editDirs{XMP} and $psRev == 0) {
+                    if ($flags{EPS}) {
+                        $exifTool->Warn("Can't write XMP to Illustrator 8 or older EPS files");
+                    } else {
+                        $exifTool->Warn("Can't write XMP to PS-format AI files");
+                    }
+                    # pretend like we wrote it already so we won't try to add it later
+                    $doneDir{XMP} = 1;
+                }
+                # don't allow "Creator" to be changed in Illustrator files
+                # (we need it to be able to recognize these files)
+                # --> find a better way to do this!
+                if ($$newTags{$tag}) {
+                    $exifTool->Warn("Can't change Postscript:Creator of Illustrator files");
+                    delete $$newTags{$tag};
+                }
+            }
+            if ($$newTags{$tag}) {
+                my $tagInfo = $$newTags{$tag};
+                delete $$newTags{$tag}; # write it then forget it
+                next unless ref $tagInfo;
+                # decode comment string (reading continuation lines if necessary)
+                $val = DecodeComment($val, $raf, \@lines, \$data);
+                $val = join $exifTool->Options('ListSep'), @$val if ref $val eq 'ARRAY';
+                my $nvHash = $exifTool->GetNewValueHash($tagInfo);
+                if ($exifTool->IsOverwriting($nvHash, $val)) {
+                    $exifTool->VerboseValue("- PostScript:$$tagInfo{Name}", $val);
+                    $val = $exifTool->GetNewValues($nvHash);
+                    ++$exifTool->{CHANGED};
+                    next unless defined $val;   # next if tag is being deleted
+                    $exifTool->VerboseValue("+ PostScript:$$tagInfo{Name}", $val);
+                    $data = EncodeTag($tag, $val);
+                }
+            }
+        # (note: Adobe InDesign doesn't put colon after %ADO_ContainsXMP -- doh!)
+        } elsif (defined $xmpHint and $data =~ m{^%ADO_ContainsXMP:? ?(.+?)[\x0d\x0a]*$}s) {
+            # change the XMP hint if necessary
+            if ($xmpHint) {
+                $data = "%ADO_ContainsXMP: MainFirst$/" if $1 eq 'NoMain';
+            } else {
+                $data = "%ADO_ContainsXMP: NoMain$/";
+            }
+            # delete XMP hint flags
+            delete $$newTags{XMP_HINT};
+            undef $xmpHint;
+        } else {
+            # look for end of comments section
+            if (%$newTags and ($data !~ /^%\S/ or
+                $data =~ /^%(%EndComments|%Page:|%PlateFile:|%BeginObject:|.*BeginLayer)/))
+            {
+                # write new tags at end of comments section
+                WriteNewTags($exifTool, $outfile, $newTags) or $err = 1;
+                undef $xmpHint;
+            }
+            # look for start of drawing commands (AI uses "%AI5_BeginLayer",
+            # and Helios uses "%%BeginObject:")
+            if ($data =~ /^%(%Page:|%PlateFile:|%BeginObject:|.*BeginLayer)/ or
+                $data !~ m{^(%.*|\s*)$}s)
+            {
+                # we have reached the first page or drawing command, so create necessary
+                # directories and copy the rest of the file, then all done
+                my $dir;
+                my $plateFile = ($data =~ /^%%PlateFile:/);
+                # create Photoshop first, then XMP if necessary
+                foreach $dir (qw{Photoshop ICC_Profile XMP}) {
+                    next unless $$editDirs{$dir} and not $doneDir{$dir};
+                    if ($plateFile) {
+                        # PlateFile comments may contain offsets so we can't edit these files!
+                        $exifTool->Warn("Can only edit PostScript information DCS Plate files");
+                        last;
+                    }
+                    next unless $$addDirs{$dir} or $dir eq 'XMP';
+                    $flags{WROTE_BEGIN} = 0;
+                    WritePSDirectory($exifTool, $outfile, $dir, undef, \%flags) or $err = 1;
+                    $doneDir{$dir} = 1;
+                }
+                # copy rest of file
+                if ($flags{TRAILER}) {
+                    # write trailer before %%EOF
+                    for (;;) {
+                        Write($outfile, $data) or $err = 1;
+                        if (@lines) {
+                            $data = shift @lines;
+                        } else {
+                            $raf->ReadLine($data) or undef($data), last;
+                            $dos and CheckPSEnd($raf, $psEnd, $data);
+                            if ($data =~ /[\x0d\x0a]%%EOF\b/g) {
+                                # split data before "%%EOF"
+                                # (necessary if data contains other newline sequences)
+                                my $pos = pos($data) - 5;
+                                push @lines, substr($data, $pos);
+                                $data = substr($data, 0, $pos);
+                            }
+                        }
+                        last if $data =~ /^%%EOF\b/;
+                    }
+                    Write($outfile, $flags{TRAILER}) or $err = 1;
+                }
+                # simply copy the rest of the file if any data is left
+                if (defined $data) {
+                    Write($outfile, $data) or $err = 1;
+                    Write($outfile, @lines) or $err = 1 if @lines;
+                    while ($raf->Read($data, 65536)) {
+                        $dos and CheckPSEnd($raf, $psEnd, $data);
+                        Write($outfile, $data) or $err = 1;
+                    }
+                }
+                last;   # all done!
+            }
+        }
+        # write new information or copy existing line
+        Write($outfile, $data) or $err = 1;
+    }
+    if ($dos and not $err) {
+        # must go back and set length of PS section in DOS header (very dumb design)
+        if (ref $outfile eq 'SCALAR') {
+            Set32u(length($$outfile) - $psNewStart, $outfile, 8);
+        } else {
+            my $pos = tell $outfile;
+            unless (seek($outfile, 8, 0) and
+                    print $outfile Set32u($pos - $psNewStart) and
+                    seek($outfile, $pos, 0))
+            {
+                $exifTool->Error("Can't write DOS-style PS files in non-seekable stream");
+                $err = 1;
+            }
+        }
+    }
+    # issue warning if we couldn't write any information
+    unless ($err) {
+        my (@notDone, $dir);
+        delete $$newTags{XMP_HINT};
+        push @notDone, 'PostScript' if %$newTags;
+        foreach $dir (qw{Photoshop ICC_Profile XMP}) {
+            push @notDone, $dir if $$editDirs{$dir} and not $doneDir{$dir} and
+                                   not $$exifTool{DEL_GROUP}{$dir};
+        }
+        @notDone and $exifTool->Warn("Couldn't write ".join('/',@notDone).' information');
+    }
+    $endToken and $exifTool->Error("File missing $endToken");
+    return $err ? -1 : 1;
+}
+
+
+1; # end
+
+__END__
+
+=head1 NAME
+
+Image::ExifTool::WritePostScript.pl - Write PostScript meta information
+
+=head1 SYNOPSIS
+
+This file is autoloaded by Image::ExifTool::PostScript.
+
+=head1 DESCRIPTION
+
+This file contains routines to write meta information in PostScript
+documents.  Six forms of meta information may be written:
+
+    1) PostScript comments (Adobe DSC specification)
+    2) XMP information embedded in a document-level XMP stream
+    3) EXIF information embedded in a Photoshop record
+    4) IPTC information embedded in a PhotoShop record
+    5) ICC_Profile information embedded in an ICCProfile record
+    6) TIFF information embedded in DOS-style binary header
+
+=head1 NOTES
+
+Currently, information is written only in the outer-level document.
+
+Photoshop will discard meta information in a PostScript document if it has
+to rasterize the image, and it will rasterize anything that doesn't contain
+the Photoshop-specific 'ImageData' tag.  So don't expect Photoshop to read
+any meta information added to EPS images that it didn't create.
+
+The following two acronyms may be confusing since they are so similar and
+have different meanings with respect to PostScript documents:
+
+    DSC = Document Structuring Conventions
+    DCS = Desktop Color Separation
+
+=head1 REFERENCES
+
+See references in L<PostScript.pm|Image::ExifTool::PostScript>, plus:
+
+=over 4
+
+=item L<http://www.adobe.com/products/postscript/pdfs/PLRM.pdf>
+
+=item L<http://www-cdf.fnal.gov/offline/PostScript/PLRM2.pdf>
+
+=item L<http://partners.adobe.com/public/developer/en/acrobat/sdk/pdf/pdf_creation_apis_and_specs/pdfmarkReference.pdf>
+
+=back
+
+=head1 ACKNOWLEDGEMENTS
+
+Thanks to Tim Kordick for his help testing the EPS writer.
+
+=head1 AUTHOR
+
+Copyright 2003-2013, Phil Harvey (phil at owl.phy.queensu.ca)
+
+This library is free software; you can redistribute it and/or modify it
+under the same terms as Perl itself.
+
+=head1 SEE ALSO
+
+L<Image::ExifTool::PostScript(3pm)|Image::ExifTool::PostScript>,
+L<Image::ExifTool(3pm)|Image::ExifTool>
+
+=cut