mini_exiftool_vendored 8.9.7.v2 → 9.2.7.v1

data/vendor/Image-ExifTool-9.27/lib/Image/ExifTool/PostScript.pm

@@ -0,0 +1,693 @@
+#------------------------------------------------------------------------------
+# File:         PostScript.pm
+#
+# Description:  Read PostScript meta information
+#
+# Revisions:    07/08/2005 - P. Harvey Created
+#
+# References:   1) http://partners.adobe.com/public/developer/en/ps/5002.EPSF_Spec.pdf
+#               2) http://partners.adobe.com/public/developer/en/ps/5001.DSC_Spec.pdf
+#               3) http://partners.adobe.com/public/developer/en/illustrator/sdk/AI7FileFormat.pdf
+#------------------------------------------------------------------------------
+
+package Image::ExifTool::PostScript;
+
+use strict;
+use vars qw($VERSION $AUTOLOAD);
+use Image::ExifTool qw(:DataAccess :Utils);
+
+$VERSION = '1.35';
+
+sub WritePS($$);
+sub ProcessPS($$;$);
+
+# PostScript tag table
+%Image::ExifTool::PostScript::Main = (
+    PROCESS_PROC => \&ProcessPS,
+    WRITE_PROC => \&WritePS,
+    PREFERRED => 1, # always add these tags when writing
+    GROUPS => { 2 => 'Image' },
+    # Note: Make all of these tags priority 0 since the first one found at
+    # the start of the file should take priority (in case multiples exist)
+    Author      => { Priority => 0, Groups => { 2 => 'Author' }, Writable => 'string' },
+    BoundingBox => { Priority => 0 },
+    Copyright   => { Priority => 0, Writable => 'string' }, #2
+    CreationDate => {
+        Name => 'CreateDate',
+        Priority => 0,
+        Groups => { 2 => 'Time' },
+        Writable => 'string',
+        PrintConv => '$self->ConvertDateTime($val)',
+        PrintConvInv => '$self->InverseDateTime($val)',
+    },
+    Creator     => { Priority => 0, Writable => 'string' },
+    ImageData   => { Priority => 0 },
+    For         => { Priority => 0, Writable => 'string', Notes => 'for whom the document was prepared'},
+    Keywords    => { Priority => 0, Writable => 'string' },
+    ModDate => {
+        Name => 'ModifyDate',
+        Priority => 0,
+        Groups => { 2 => 'Time' },
+        Writable => 'string',
+        PrintConv => '$self->ConvertDateTime($val)',
+        PrintConvInv => '$self->InverseDateTime($val)',
+    },
+    Pages       => { Priority => 0 },
+    Routing     => { Priority => 0, Writable => 'string' }, #2
+    Subject     => { Priority => 0, Writable => 'string' },
+    Title       => { Priority => 0, Writable => 'string' },
+    Version     => { Priority => 0, Writable => 'string' }, #2
+    # these subdirectories for documentation only
+    BeginPhotoshop => {
+        Name => 'PhotoshopData',
+        SubDirectory => {
+            TagTable => 'Image::ExifTool::Photoshop::Main',
+        },
+    },
+    BeginICCProfile => {
+        Name => 'ICC_Profile',
+        SubDirectory => {
+            TagTable => 'Image::ExifTool::ICC_Profile::Main',
+        },
+    },
+    begin_xml_packet => {
+        Name => 'XMP',
+        SubDirectory => {
+            TagTable => 'Image::ExifTool::XMP::Main',
+        },
+    },
+    TIFFPreview => {
+        Binary => 1,
+        Notes => q{
+            not a real tag ID, but used to represent the TIFF preview extracted from DOS
+            EPS images
+        },
+    },
+    BeginDocument => {
+        Name => 'EmbeddedFile',
+        SubDirectory => {
+            TagTable => 'Image::ExifTool::PostScript::Main',
+        },
+        Notes => 'extracted with ExtractEmbedded option',
+    },
+    EmbeddedFileName => {
+        Notes => q{
+            not a real tag ID, but the file name from a BeginDocument statement.
+            Extracted with document metadata when ExtractEmbedded option is used
+        },
+    },
+);
+
+# composite tags
+%Image::ExifTool::PostScript::Composite = (
+    GROUPS => { 2 => 'Image' },
+    # BoundingBox is in points, not pixels,
+    # but use it anyway if ImageData is not available
+    ImageWidth => {
+        Desire => {
+            0 => 'Main:PostScript:ImageData',
+            1 => 'PostScript:BoundingBox',
+        },
+        ValueConv => 'Image::ExifTool::PostScript::ImageSize(\@val, 0)',
+    },
+    ImageHeight => {
+        Desire => {
+            0 => 'Main:PostScript:ImageData',
+            1 => 'PostScript:BoundingBox',
+        },
+        ValueConv => 'Image::ExifTool::PostScript::ImageSize(\@val, 1)',
+    },
+);
+
+# add our composite tags
+Image::ExifTool::AddCompositeTags('Image::ExifTool::PostScript');
+
+#------------------------------------------------------------------------------
+# AutoLoad our writer routines when necessary
+#
+sub AUTOLOAD
+{
+    return Image::ExifTool::DoAutoLoad($AUTOLOAD, @_);
+}
+
+#------------------------------------------------------------------------------
+# Is this a PC system
+# Returns: true for PC systems
+my %isPC = (MSWin32 => 1, os2 => 1, dos => 1, NetWare => 1, symbian => 1, cygwin => 1);
+sub IsPC()
+{
+    return $isPC{$^O};
+}
+
+#------------------------------------------------------------------------------
+# Get image width or height
+# Inputs: 0) value list ref (ImageData, BoundingBox), 1) true to get height
+sub ImageSize($$)
+{
+    my ($vals, $getHeight) = @_;
+    my ($w, $h);
+    if ($$vals[0] and $$vals[0] =~ /^(\d+) (\d+)/) {
+        ($w, $h) = ($1, $2);
+    } elsif ($$vals[1] and $$vals[1] =~ /^(\d+) (\d+) (\d+) (\d+)/) {
+        ($w, $h) = ($3 - $1, $4 - $2);
+    }
+    return $getHeight ? $h : $w;
+}
+
+#------------------------------------------------------------------------------
+# Set PostScript format error warning
+# Inputs: 0) ExifTool object reference, 1) error string
+# Returns: 1
+sub PSErr($$)
+{
+    my ($exifTool, $str) = @_;
+    # set file type if not done already
+    my $ext = $$exifTool{FILE_EXT};
+    $exifTool->SetFileType(($ext and $ext eq 'AI') ? 'AI' : 'PS');
+    $exifTool->Warn("PostScript format error ($str)");
+    return 1;
+}
+
+#------------------------------------------------------------------------------
+# Return input record separator to use for the specified file
+# Inputs: 0) RAF reference
+# Returns: Input record separator or undef on error
+sub GetInputRecordSeparator($)
+{
+    my $raf = shift;
+    my $pos = $raf->Tell(); # save current position
+    my ($data, $sep);
+    $raf->Read($data,256) or return undef;
+    my ($a, $d) = (999,999);
+    $a = pos($data), pos($data) = 0 if $data =~ /\x0a/g;
+    $d = pos($data) if $data =~ /\x0d/g;
+    my $diff = $a - $d;
+    if ($diff eq 1) {
+        $sep = "\x0d\x0a";
+    } elsif ($diff eq -1) {
+        $sep = "\x0a\x0d";
+    } elsif ($diff > 0) {
+        $sep = "\x0d";
+    } elsif ($diff < 0) {
+        $sep = "\x0a";
+    } # else error
+    $raf->Seek($pos, 0);    # restore original position
+    return $sep;
+}
+
+#------------------------------------------------------------------------------
+# Decode comment from PostScript file
+# Inputs: 0) comment string, 1) RAF ref, 2) reference to lines array
+#         3) optional data reference for extra lines read from file
+# Returns: Decoded comment string (may be an array reference)
+# - handles multi-line comments and escape sequences
+sub DecodeComment($$$;$)
+{
+    my ($val, $raf, $lines, $dataPt) = @_;
+    $val =~ s/\x0d*\x0a*$//;        # remove trailing CR, LF or CR/LF
+    # check for continuation comments
+    for (;;) {
+        unless (@$lines) {
+            my $buff;
+            $raf->ReadLine($buff) or last;
+            my $altnl = $/ eq "\x0d" ? "\x0a" : "\x0d";
+            if ($buff =~ /$altnl/) {
+                chomp $buff if $/ eq "\x0d\x0a";        # remove DOS newline before splitting
+                # split into separate lines
+                @$lines = split /$altnl/, $buff, -1;
+                # handle case of DOS newline data inside file using Unix newlines
+                @$lines = ( $$lines[0] . $$lines[1] ) if @$lines == 2 and $$lines[1] eq $/;
+                @$lines[-1] .= $/ if $/ eq "\x0d\x0a";  # add back trailing newline
+            } else {
+                push @$lines, $buff;
+            }
+        }
+        last unless $$lines[0] =~ /^%%\+/;  # is the next line a continuation?
+        $$dataPt .= $$lines[0] if $dataPt;  # add to data if necessary
+        $$lines[0] =~ s/\x0d*\x0a*$//;      # remove trailing CR, LF or CR/LF
+        $val .= substr(shift(@$lines), 3);  # add to value (without leading "%%+")
+    }
+    my @vals;
+    # handle bracketed string values
+    if ($val =~ s/^\((.*)\)$/$1/) { # remove brackets if necessary
+        # split into an array of strings if necessary
+        my $nesting = 1;
+        while ($val =~ /(\(|\))/g) {
+            my $bra = $1;
+            my $pos = pos($val) - 2;
+            my $backslashes = 0;
+            while ($pos and substr($val, $pos, 1) eq '\\') {
+                --$pos;
+                ++$backslashes;
+            }
+            next if $backslashes & 0x01;    # escaped if odd number
+            if ($bra eq '(') {
+                ++$nesting;
+            } else {
+                --$nesting;
+                unless ($nesting) {
+                    push @vals, substr($val, 0, pos($val)-1);
+                    $val = substr($val, pos($val));
+                    ++$nesting if $val =~ s/\s*\(//;
+                }
+            }
+        }
+        push @vals, $val;
+        foreach $val (@vals) {
+            # decode escape sequences in bracketed strings
+            # (similar to code in PDF.pm, but without line continuation)
+            while ($val =~ /\\(.)/sg) {
+                my $n = pos($val) - 2;
+                my $c = $1;
+                my $r;
+                if ($c =~ /[0-7]/) {
+                    # get up to 2 more octal digits
+                    $c .= $1 if $val =~ /\G([0-7]{1,2})/g;
+                    # convert octal escape code
+                    $r = chr(oct($c) & 0xff);
+                } else {
+                    # convert escaped characters
+                    ($r = $c) =~ tr/nrtbf/\n\r\t\b\f/;
+                }
+                substr($val, $n, length($c)+1) = $r;
+                # continue search after this character
+                pos($val) = $n + length($r);
+            }
+        }
+        $val = @vals > 1 ? \@vals : $vals[0];
+    }
+    return $val;
+}
+
+#------------------------------------------------------------------------------
+# Unescape PostScript string
+# Inputs: 0) string
+# Returns: unescaped string
+sub UnescapePostScript($)
+{
+    my $str = shift;
+    # decode escape sequences in literal strings
+    while ($str =~ /\\(.)/sg) {
+        my $n = pos($str) - 2;
+        my $c = $1;
+        my $r;
+        if ($c =~ /[0-7]/) {
+            # get up to 2 more octal digits
+            $c .= $1 if $str =~ /\G([0-7]{1,2})/g;
+            # convert octal escape code
+            $r = chr(oct($c) & 0xff);
+        } elsif ($c eq "\x0d") {
+            # the string is continued if the line ends with '\'
+            # (also remove "\x0d\x0a")
+            $c .= $1 if $str =~ /\G(\x0a)/g;
+            $r = '';
+        } elsif ($c eq "\x0a") {
+            $r = '';
+        } else {
+            # convert escaped characters
+            ($r = $c) =~ tr/nrtbf/\n\r\t\b\f/;
+        }
+        substr($str, $n, length($c)+1) = $r;
+        # continue search after this character
+        pos($str) = $n + length($r);
+    }
+    return $str;
+}
+
+#------------------------------------------------------------------------------
+# Extract information from EPS, PS or AI file
+# Inputs: 0) ExifTool object reference, 1) dirInfo reference, 2) optional tag table ref
+# Returns: 1 if this was a valid PostScript file
+sub ProcessPS($$;$)
+{
+    my ($exifTool, $dirInfo, $tagTablePtr) = @_;
+    my $raf = $$dirInfo{RAF};
+    my $embedded = $exifTool->Options('ExtractEmbedded');
+    my ($data, $dos, $endDoc, $fontTable, $comment);
+
+    # allow read from data
+    $raf = new File::RandomAccess($$dirInfo{DataPt}) unless $raf;
+#
+# determine if this is a postscript file
+#
+    $raf->Read($data, 4) == 4 or return 0;
+    # accept either ASCII or DOS binary postscript file format
+    return 0 unless $data =~ /^(%!PS|%!Ad|%!Fo|\xc5\xd0\xd3\xc6)/;
+    if ($data =~ /^%!Ad/) {
+        # I've seen PS files start with "%!Adobe-PS"...
+        return 0 unless $raf->Read($data, 6) == 6 and $data eq "obe-PS";
+    } elsif ($data =~ /^\xc5\xd0\xd3\xc6/) {
+        # process DOS binary file header
+        # - save DOS header then seek ahead and check PS header
+        $raf->Read($dos, 26) == 26 or return 0;
+        SetByteOrder('II');
+        unless ($raf->Seek(Get32u(\$dos, 0), 0) and
+                $raf->Read($data, 4) == 4 and $data eq '%!PS')
+        {
+            return PSErr($exifTool, 'invalid header');
+        }
+    } else {
+        # check for PostScript font file (PFA or PFB)
+        my $d2;
+        $data .= $d2 if $raf->Read($d2,12);
+        if ($data =~ /^%!(PS-(AdobeFont-|Bitstream )|FontType1-)/) {
+            $exifTool->SetFileType('PFA');  # PostScript ASCII font file
+            $fontTable = GetTagTable('Image::ExifTool::Font::PSInfo');
+            # PostScript font files may contain an unformatted comments which may
+            # contain useful information, so accumulate these for the Comment tag
+            $comment = 1;
+        }
+        $raf->Seek(-length($data), 1);
+    }
+#
+# set the newline type based on the first newline found in the file
+#
+    local $/ = GetInputRecordSeparator($raf);
+    $/ or return PSErr($exifTool, 'invalid PS data');
+
+    # set file type (PostScript or EPS)
+    $raf->ReadLine($data) or $data = '';
+    my $type;
+    if ($data =~ /EPSF/) {
+        $type = 'EPS';
+    } else {
+        # read next line to see if this is an Illustrator file
+        my $line2;
+        my $pos = $raf->Tell();
+        if ($raf->ReadLine($line2) and $line2 =~ /^%%Creator: Adobe Illustrator/) {
+            $type = 'AI';
+        } else {
+            $type = 'PS';
+        }
+        $raf->Seek($pos, 0);
+    }
+    $exifTool->SetFileType($type);
+#
+# extract TIFF information from DOS header
+#
+    $tagTablePtr or $tagTablePtr = GetTagTable('Image::ExifTool::PostScript::Main');
+    if ($dos) {
+        my $base = Get32u(\$dos, 16);
+        if ($base) {
+            my $pos = $raf->Tell();
+            # extract the TIFF preview
+            my $len = Get32u(\$dos, 20);
+            my $val = $exifTool->ExtractBinary($base, $len, 'TIFFPreview');
+            if (defined $val and $val =~ /^(MM\0\x2a|II\x2a\0|Binary)/) {
+                $exifTool->HandleTag($tagTablePtr, 'TIFFPreview', $val);
+            } else {
+                $exifTool->Warn('Bad TIFF preview image');
+            }
+            # extract information from TIFF in DOS header
+            # (set Parent to '' to avoid setting FileType tag again)
+            my %dirInfo = (
+                Parent => '',
+                RAF => $raf,
+                Base => $base,
+            );
+            $exifTool->ProcessTIFF(\%dirInfo) or $exifTool->Warn('Bad embedded TIFF');
+            # position file pointer to extract PS information
+            $raf->Seek($pos, 0);
+        }
+    }
+#
+# parse the postscript
+#
+    my ($buff, $mode, $beginToken, $endToken, $docNum, $subDocNum, $changedNL);
+    my (@lines, $altnl);
+    if ($/ eq "\x0d") {
+        $altnl = "\x0a";
+    } else {
+        $/ = "\x0a";        # end on any LF (even if DOS CR+LF)
+        $altnl = "\x0d";
+    }
+    for (;;) {
+        if (@lines) {
+            $data = shift @lines;
+        } else {
+            $raf->ReadLine($data) or last;
+            # check for alternate newlines as efficiently as possible
+            if ($data =~ /$altnl/) {
+                if (length($data) > 500000 and IsPC()) {
+                    # Windows can't split very long lines due to poor memory handling,
+                    # so re-read the file with the other newline character instead
+                    # (slower but uses less memory)
+                    unless ($changedNL) {
+                        $changedNL = 1;
+                        my $t = $/;
+                        $/ = $altnl;
+                        $altnl = $t;
+                        $raf->Seek(-length($data), 1);
+                        next;
+                    }
+                } else {
+                    # split into separate lines
+                    @lines = split /$altnl/, $data, -1;
+                    $data = shift @lines;
+                    if (@lines == 1 and $lines[0] eq $/) {
+                        # handle case of DOS newline data inside file using Unix newlines
+                        $data .= $lines[0];
+                        undef @lines;
+                    }
+                }
+            }
+        }
+        undef $changedNL;
+        if ($mode) {
+            if (not $endToken) {
+                $buff .= $data;
+                next unless $data =~ m{<\?xpacket end=.(w|r).\?>($/|$)};
+            } elsif ($data !~ /^$endToken/i) {
+                if ($mode eq 'XMP') {
+                    $buff .= $data;
+                } elsif ($mode eq 'Document') {
+                    # ignore embedded documents, but keep track of nesting level
+                    $docNum .= '-1' if $data =~ /^$beginToken/;
+                } else {
+                    # data is ASCII-hex encoded
+                    $data =~ tr/0-9A-Fa-f//dc;  # remove all but hex characters
+                    $buff .= pack('H*', $data); # translate from hex
+                }
+                next;
+            } elsif ($mode eq 'Document') {
+                $docNum =~ s/-?\d+$//;  # decrement document nesting level
+                # done with Document mode if we are back at the top level
+                undef $mode unless $docNum;
+                next;
+            }
+        } elsif ($endDoc and $data =~ /^$endDoc/i) {
+            $docNum =~ s/-?(\d+)$//;        # decrement nesting level
+            $subDocNum = $1;                # remember our last sub-document number
+            $$exifTool{DOC_NUM} = $docNum;
+            undef $endDoc unless $docNum;   # done with document if top level
+            next;
+        } elsif ($data =~ /^(%{1,2})(Begin)(_xml_packet|Photoshop|ICCProfile|Document|Binary)/i) {
+            # the beginning of a data block
+            my %modeLookup = (
+                _xml_packet => 'XMP',
+                photoshop   => 'Photoshop',
+                iccprofile  => 'ICC_Profile',
+                document    => 'Document',
+                binary      => undef, # (we will try to skip this)
+            );
+            $mode = $modeLookup{lc $3};
+            unless ($mode) {
+                if (not @lines and $data =~ /^%{1,2}BeginBinary:\s*(\d+)/i) {
+                    $raf->Seek($1, 1) or last;  # skip binary data
+                }
+                next;
+            }
+            $buff = '';
+            $beginToken = $1 . $2 . $3;
+            $endToken = $1 . ($2 eq 'begin' ? 'end' : 'End') . $3;
+            if ($mode eq 'Document') {
+                # this is either the 1st sub-document or Nth document
+                if ($docNum) {
+                    # increase nesting level
+                    $docNum .= '-' . (++$subDocNum);
+                } else {
+                    # this is the Nth document
+                    $docNum = $$exifTool{DOC_COUNT} + 1;
+                }
+                $subDocNum = 0; # new level, so reset subDocNum
+                next unless $embedded;  # skip over this document
+                # set document number for family 4-7 group names
+                $$exifTool{DOC_NUM} = $docNum;
+                $$exifTool{LIST_TAGS} = { };  # don't build lists across different documents
+                $exifTool->{PROCESSED} = { }; # re-initialize processed directory lookup too
+                $endDoc = $endToken;          # parse to EndDocument token
+                # reset mode to allow parsing into sub-directories
+                undef $endToken;
+                undef $mode;
+                # save document name if available
+                if ($data =~ /^$beginToken:\s+([^\n\r]+)/i) {
+                    my $docName = $1;
+                    # remove brackets if necessary
+                    $docName = $1 if $docName =~ /^\((.*)\)$/;
+                    $exifTool->HandleTag($tagTablePtr, 'EmbeddedFileName', $docName);
+                }
+            }
+            next;
+        } elsif ($data =~ /^<\?xpacket begin=.{7,13}W5M0MpCehiHzreSzNTczkc9d/) {
+            # pick up any stray XMP data
+            $mode = 'XMP';
+            $buff = $data;
+            undef $endToken;    # no end token (just look for xpacket end)
+            # XMP could be contained in a single line (if newlines are different)
+            next unless $data =~ m{<\?xpacket end=.(w|r).\?>($/|$)};
+        } elsif ($data =~ /^%%?(\w+): ?(.*)/s and $$tagTablePtr{$1}) {
+            my ($tag, $val) = ($1, $2);
+            # only allow 'ImageData' to have single leading '%'
+            next unless $data =~ /^%%/ or $1 eq 'ImageData';
+            # decode comment string (reading continuation lines if necessary)
+            $val = DecodeComment($val, $raf, \@lines);
+            $exifTool->HandleTag($tagTablePtr, $tag, $val);
+            next;
+        } elsif ($embedded and $data =~ /^%AI12_CompressedData/) {
+            # the rest of the file is compressed
+            unless (eval 'require Compress::Zlib') {
+                $exifTool->Warn('Install Compress::Zlib to extract compressed embedded data');
+                last;
+            }
+            # seek back to find the start of the compressed data in the file
+            my $tlen = length($data) + @lines;
+            $tlen += length $_ foreach @lines;
+            my $backTo = $raf->Tell() - $tlen - 64;
+            $backTo = 0 if $backTo < 0;
+            last unless $raf->Seek($backTo, 0) and $raf->Read($data, 2048);
+            last unless $data =~ s/.*?%AI12_CompressedData//;
+            my $inflate = Compress::Zlib::inflateInit();
+            $inflate or $exifTool->Warn('Error initializing inflate'), last;
+            # generate a PS-like file in memory from the compressed data
+            my $verbose = $exifTool->Options('Verbose');
+            if ($verbose > 1) {
+                $exifTool->VerboseDir('AI12_CompressedData (first 4kB)');
+                $exifTool->VerboseDump(\$data);
+            }
+            # remove header if it exists (Windows AI files only)
+            $data =~ s/^.{0,256}EndData[\x0d\x0a]+//s;
+            my $val;
+            for (;;) {
+                my ($v2, $stat) = $inflate->inflate($data);
+                $stat == Compress::Zlib::Z_STREAM_END() and $val .= $v2, last;
+                $stat != Compress::Zlib::Z_OK() and undef($val), last;
+                if (defined $val) {
+                    $val .= $v2;
+                } elsif ($v2 =~ /^%!PS/) {
+                    $val = $v2;
+                } else {
+                    # add postscript header (for file recognition) if it doesn't exist
+                    $val = "%!PS-Adobe-3.0$/" . $v2;
+                }
+                $raf->Read($data, 65536) or last;
+            }
+            defined $val or $exifTool->Warn('Error inflating AI compressed data'), last;
+            if ($verbose > 1) {
+                $exifTool->VerboseDir('Uncompressed AI12 Data');
+                $exifTool->VerboseDump(\$val);
+            }
+            # extract information from embedded images in the uncompressed data
+            $val =  # add PS header in case it needs one
+            ProcessPS($exifTool, { DataPt => \$val });
+            last;
+        } elsif ($fontTable) {
+            if (defined $comment) {
+                # extract initial comments from PostScript Font files
+                if ($data =~ /^%\s+(.*?)[\x0d\x0a]/) {
+                    $comment .= "\n" if $comment;
+                    $comment .= $1;
+                    next;
+                } elsif ($data !~ /^%/) {
+                    # stop extracting comments at the first non-comment line
+                    $exifTool->FoundTag('Comment', $comment) if length $comment;
+                    undef $comment;
+                }
+            }
+            if ($data =~ m{^\s*/(\w+)\s*(.*)} and $$fontTable{$1}) {
+                my ($tag, $val) = ($1, $2);
+                if ($val =~ /^\((.*)\)/) {
+                    $val = UnescapePostScript($1);
+                } elsif ($val =~ m{/?(\S+)}) {
+                    $val = $1;
+                }
+                $exifTool->HandleTag($fontTable, $tag, $val);
+            } elsif ($data =~ /^currentdict end/) {
+                # only extract tags from initial FontInfo dict
+                undef $fontTable;
+            }
+            next;
+        } else {
+            next;
+        }
+        # extract information from buffered data
+        my %dirInfo = (
+            DataPt => \$buff,
+            DataLen => length $buff,
+            DirStart => 0,
+            DirLen => length $buff,
+            Parent => 'PostScript',
+        );
+        my $subTablePtr = GetTagTable("Image::ExifTool::${mode}::Main");
+        unless ($exifTool->ProcessDirectory(\%dirInfo, $subTablePtr)) {
+            $exifTool->Warn("Error processing $mode information in PostScript file");
+        }
+        undef $buff;
+        undef $mode;
+    }
+    $mode = 'Document' if $endDoc and not $mode;
+    $mode and PSErr($exifTool, "unterminated $mode data");
+    return 1;
+}
+
+#------------------------------------------------------------------------------
+# Extract information from EPS file
+# Inputs: 0) ExifTool object reference, 1) dirInfo reference
+# Returns: 1 if this was a valid PostScript file
+sub ProcessEPS($$)
+{
+    return ProcessPS($_[0],$_[1]);
+}
+
+1; # end
+
+
+__END__
+
+=head1 NAME
+
+Image::ExifTool::PostScript - Read PostScript meta information
+
+=head1 SYNOPSIS
+
+This module is loaded automatically by Image::ExifTool when required.
+
+=head1 DESCRIPTION
+
+This code reads meta information from EPS (Encapsulated PostScript), PS
+(PostScript) and AI (Adobe Illustrator) files.
+
+=head1 AUTHOR
+
+Copyright 2003-2013, Phil Harvey (phil at owl.phy.queensu.ca)
+
+This library is free software; you can redistribute it and/or modify it
+under the same terms as Perl itself.
+
+=head1 REFERENCES
+
+=over 4
+
+=item L<http://partners.adobe.com/public/developer/en/ps/5002.EPSF_Spec.pdf>
+
+=item L<http://partners.adobe.com/public/developer/en/ps/5001.DSC_Spec.pdf>
+
+=item L<http://partners.adobe.com/public/developer/en/illustrator/sdk/AI7FileFormat.pdf>
+
+=back
+
+=head1 SEE ALSO
+
+L<Image::ExifTool::TagNames/PostScript Tags>,
+L<Image::ExifTool(3pm)|Image::ExifTool>
+
+=cut