gosu 0.15.1 → 1.1.0.pre1

data/dependencies/SDL/include/SDL_test_harness.h

@@ -0,0 +1,134 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_test_harness.h
+ *
+ *  Include file for SDL test framework.
+ *
+ *  This code is a part of the SDL2_test library, not the main SDL library.
+ */
+
+/*
+  Defines types for test case definitions and the test execution harness API.
+
+  Based on original GSOC code by Markus Kauppila <markus.kauppila@gmail.com>
+*/
+
+#ifndef SDL_test_h_arness_h
+#define SDL_test_h_arness_h
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ! Definitions for test case structures */
+#define TEST_ENABLED  1
+#define TEST_DISABLED 0
+
+/* ! Definition of all the possible test return values of the test case method */
+#define TEST_ABORTED        -1
+#define TEST_STARTED         0
+#define TEST_COMPLETED       1
+#define TEST_SKIPPED         2
+
+/* ! Definition of all the possible test results for the harness */
+#define TEST_RESULT_PASSED              0
+#define TEST_RESULT_FAILED              1
+#define TEST_RESULT_NO_ASSERT           2
+#define TEST_RESULT_SKIPPED             3
+#define TEST_RESULT_SETUP_FAILURE       4
+
+/* !< Function pointer to a test case setup function (run before every test) */
+typedef void (*SDLTest_TestCaseSetUpFp)(void *arg);
+
+/* !< Function pointer to a test case function */
+typedef int (*SDLTest_TestCaseFp)(void *arg);
+
+/* !< Function pointer to a test case teardown function (run after every test) */
+typedef void  (*SDLTest_TestCaseTearDownFp)(void *arg);
+
+/**
+ * Holds information about a single test case.
+ */
+typedef struct SDLTest_TestCaseReference {
+    /* !< Func2Stress */
+    SDLTest_TestCaseFp testCase;
+    /* !< Short name (or function name) "Func2Stress" */
+    char *name;
+    /* !< Long name or full description "This test pushes func2() to the limit." */
+    char *description;
+    /* !< Set to TEST_ENABLED or TEST_DISABLED (test won't be run) */
+    int enabled;
+} SDLTest_TestCaseReference;
+
+/**
+ * Holds information about a test suite (multiple test cases).
+ */
+typedef struct SDLTest_TestSuiteReference {
+    /* !< "PlatformSuite" */
+    char *name;
+    /* !< The function that is run before each test. NULL skips. */
+    SDLTest_TestCaseSetUpFp testSetUp;
+    /* !< The test cases that are run as part of the suite. Last item should be NULL. */
+    const SDLTest_TestCaseReference **testCases;
+    /* !< The function that is run after each test. NULL skips. */
+    SDLTest_TestCaseTearDownFp testTearDown;
+} SDLTest_TestSuiteReference;
+
+
+/**
+ * \brief Generates a random run seed string for the harness. The generated seed will contain alphanumeric characters (0-9A-Z).
+ *
+ * Note: The returned string needs to be deallocated by the caller.
+ *
+ * \param length The length of the seed string to generate
+ *
+ * \returns The generated seed string
+ */
+char *SDLTest_GenerateRunSeed(const int length);
+
+/**
+ * \brief Execute a test suite using the given run seed and execution key.
+ *
+ * \param testSuites Suites containing the test case.
+ * \param userRunSeed Custom run seed provided by user, or NULL to autogenerate one.
+ * \param userExecKey Custom execution key provided by user, or 0 to autogenerate one.
+ * \param filter Filter specification. NULL disables. Case sensitive.
+ * \param testIterations Number of iterations to run each test case.
+ *
+ * \returns Test run result; 0 when all tests passed, 1 if any tests failed.
+ */
+int SDLTest_RunSuites(SDLTest_TestSuiteReference *testSuites[], const char *userRunSeed, Uint64 userExecKey, const char *filter, int testIterations);
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_test_h_arness_h */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/dependencies/SDL/include/SDL_test_images.h

@@ -0,0 +1,78 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_test_images.h
+ *
+ *  Include file for SDL test framework.
+ *
+ *  This code is a part of the SDL2_test library, not the main SDL library.
+ */
+
+/*
+
+ Defines some images for tests.
+
+*/
+
+#ifndef SDL_test_images_h_
+#define SDL_test_images_h_
+
+#include "SDL.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *Type for test images.
+ */
+typedef struct SDLTest_SurfaceImage_s {
+  int width;
+  int height;
+  unsigned int bytes_per_pixel; /* 3:RGB, 4:RGBA */
+  const char *pixel_data;
+} SDLTest_SurfaceImage_t;
+
+/* Test images */
+SDL_Surface *SDLTest_ImageBlit(void);
+SDL_Surface *SDLTest_ImageBlitColor(void);
+SDL_Surface *SDLTest_ImageBlitAlpha(void);
+SDL_Surface *SDLTest_ImageBlitBlendAdd(void);
+SDL_Surface *SDLTest_ImageBlitBlend(void);
+SDL_Surface *SDLTest_ImageBlitBlendMod(void);
+SDL_Surface *SDLTest_ImageBlitBlendNone(void);
+SDL_Surface *SDLTest_ImageBlitBlendAll(void);
+SDL_Surface *SDLTest_ImageFace(void);
+SDL_Surface *SDLTest_ImagePrimitives(void);
+SDL_Surface *SDLTest_ImagePrimitivesBlend(void);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_test_images_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/dependencies/SDL/include/SDL_test_log.h

@@ -0,0 +1,67 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_test_log.h
+ *
+ *  Include file for SDL test framework.
+ *
+ *  This code is a part of the SDL2_test library, not the main SDL library.
+ */
+
+/*
+ *
+ *  Wrapper to log in the TEST category
+ *
+ */
+
+#ifndef SDL_test_log_h_
+#define SDL_test_log_h_
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief Prints given message with a timestamp in the TEST category and INFO priority.
+ *
+ * \param fmt Message to be logged
+ */
+void SDLTest_Log(SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(1);
+
+/**
+ * \brief Prints given message with a timestamp in the TEST category and the ERROR priority.
+ *
+ * \param fmt Message to be logged
+ */
+void SDLTest_LogError(SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(1);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_test_log_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/dependencies/SDL/include/SDL_test_md5.h

@@ -0,0 +1,129 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_test_md5.h
+ *
+ *  Include file for SDL test framework.
+ *
+ *  This code is a part of the SDL2_test library, not the main SDL library.
+ */
+
+/*
+ ***********************************************************************
+ ** Header file for implementation of MD5                             **
+ ** RSA Data Security, Inc. MD5 Message-Digest Algorithm              **
+ ** Created: 2/17/90 RLR                                              **
+ ** Revised: 12/27/90 SRD,AJ,BSK,JT Reference C version               **
+ ** Revised (for MD5): RLR 4/27/91                                    **
+ **   -- G modified to have y&~z instead of y&z                       **
+ **   -- FF, GG, HH modified to add in last register done             **
+ **   -- Access pattern: round 2 works mod 5, round 3 works mod 3     **
+ **   -- distinct additive constant for each step                     **
+ **   -- round 4 added, working mod 7                                 **
+ ***********************************************************************
+*/
+
+/*
+ ***********************************************************************
+ **  Message-digest routines:                                         **
+ **  To form the message digest for a message M                       **
+ **    (1) Initialize a context buffer mdContext using MD5Init        **
+ **    (2) Call MD5Update on mdContext and M                          **
+ **    (3) Call MD5Final on mdContext                                 **
+ **  The message digest is now in mdContext->digest[0...15]           **
+ ***********************************************************************
+*/
+
+#ifndef SDL_test_md5_h_
+#define SDL_test_md5_h_
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ------------ Definitions --------- */
+
+/* typedef a 32-bit type */
+  typedef unsigned long int MD5UINT4;
+
+/* Data structure for MD5 (Message-Digest) computation */
+  typedef struct {
+    MD5UINT4  i[2];     /* number of _bits_ handled mod 2^64 */
+    MD5UINT4  buf[4];       /* scratch buffer */
+    unsigned char in[64];   /* input buffer */
+    unsigned char digest[16];   /* actual digest after Md5Final call */
+  } SDLTest_Md5Context;
+
+/* ---------- Function Prototypes ------------- */
+
+/**
+ * \brief initialize the context
+ *
+ * \param  mdContext        pointer to context variable
+ *
+ * Note: The function initializes the message-digest context
+ *       mdContext. Call before each new use of the context -
+ *       all fields are set to zero.
+ */
+ void SDLTest_Md5Init(SDLTest_Md5Context * mdContext);
+
+
+/**
+ * \brief update digest from variable length data
+ *
+ * \param  mdContext       pointer to context variable
+ * \param  inBuf           pointer to data array/string
+ * \param  inLen           length of data array/string
+ *
+ * Note: The function updates the message-digest context to account
+ *       for the presence of each of the characters inBuf[0..inLen-1]
+ *       in the message whose digest is being computed.
+*/
+
+ void SDLTest_Md5Update(SDLTest_Md5Context * mdContext, unsigned char *inBuf,
+                 unsigned int inLen);
+
+
+/**
+ * \brief complete digest computation
+ *
+ * \param mdContext     pointer to context variable
+ *
+ * Note: The function terminates the message-digest computation and
+ *       ends with the desired message digest in mdContext.digest[0..15].
+ *       Always call before using the digest[] variable.
+*/
+
+ void SDLTest_Md5Final(SDLTest_Md5Context * mdContext);
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_test_md5_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/dependencies/SDL/include/SDL_test_memory.h

@@ -0,0 +1,63 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_test_memory.h
+ *
+ *  Include file for SDL test framework.
+ *
+ *  This code is a part of the SDL2_test library, not the main SDL library.
+ */
+
+#ifndef SDL_test_memory_h_
+#define SDL_test_memory_h_
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/**
+ * \brief Start tracking SDL memory allocations
+ * 
+ * \note This should be called before any other SDL functions for complete tracking coverage
+ */
+int SDLTest_TrackAllocations(void);
+
+/**
+ * \brief Print a log of any outstanding allocations
+ *
+ * \note This can be called after SDL_Quit()
+ */
+void SDLTest_LogAllocations(void);
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_test_memory_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */