gosu 0.15.1 → 1.1.0.pre1

data/dependencies/SDL/include/SDL_test_crc32.h

@@ -0,0 +1,124 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_test_crc32.h
+ *
+ *  Include file for SDL test framework.
+ *
+ *  This code is a part of the SDL2_test library, not the main SDL library.
+ */
+
+/*
+
+ Implements CRC32 calculations (default output is Perl String::CRC32 compatible).
+
+*/
+
+#ifndef SDL_test_crc32_h_
+#define SDL_test_crc32_h_
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------ Definitions --------- */
+
+/* Definition shared by all CRC routines */
+
+#ifndef CrcUint32
+ #define CrcUint32  unsigned int
+#endif
+#ifndef CrcUint8
+ #define CrcUint8   unsigned char
+#endif
+
+#ifdef ORIGINAL_METHOD
+ #define CRC32_POLY 0x04c11db7   /* AUTODIN II, Ethernet, & FDDI */
+#else
+ #define CRC32_POLY 0xEDB88320   /* Perl String::CRC32 compatible */
+#endif
+
+/**
+ * Data structure for CRC32 (checksum) computation
+ */
+  typedef struct {
+    CrcUint32    crc32_table[256]; /* CRC table */
+  } SDLTest_Crc32Context;
+
+/* ---------- Function Prototypes ------------- */
+
+/**
+ * \brief Initialize the CRC context
+ *
+ * Note: The function initializes the crc table required for all crc calculations.
+ *
+ * \param crcContext        pointer to context variable
+ *
+ * \returns 0 for OK, -1 on error
+ *
+ */
+ int SDLTest_Crc32Init(SDLTest_Crc32Context * crcContext);
+
+
+/**
+ * \brief calculate a crc32 from a data block
+ *
+ * \param crcContext         pointer to context variable
+ * \param inBuf              input buffer to checksum
+ * \param inLen              length of input buffer
+ * \param crc32              pointer to Uint32 to store the final CRC into
+ *
+ * \returns 0 for OK, -1 on error
+ *
+ */
+int SDLTest_Crc32Calc(SDLTest_Crc32Context * crcContext, CrcUint8 *inBuf, CrcUint32 inLen, CrcUint32 *crc32);
+
+/* Same routine broken down into three steps */
+int SDLTest_Crc32CalcStart(SDLTest_Crc32Context * crcContext, CrcUint32 *crc32);
+int SDLTest_Crc32CalcEnd(SDLTest_Crc32Context * crcContext, CrcUint32 *crc32);
+int SDLTest_Crc32CalcBuffer(SDLTest_Crc32Context * crcContext, CrcUint8 *inBuf, CrcUint32 inLen, CrcUint32 *crc32);
+
+
+/**
+ * \brief clean up CRC context
+ *
+ * \param crcContext        pointer to context variable
+ *
+ * \returns 0 for OK, -1 on error
+ *
+*/
+
+int SDLTest_Crc32Done(SDLTest_Crc32Context * crcContext);
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_test_crc32_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/dependencies/SDL/include/SDL_test_font.h

@@ -0,0 +1,81 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_test_font.h
+ *
+ *  Include file for SDL test framework.
+ *
+ *  This code is a part of the SDL2_test library, not the main SDL library.
+ */
+
+#ifndef SDL_test_font_h_
+#define SDL_test_font_h_
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Function prototypes */
+
+#define FONT_CHARACTER_SIZE  8
+
+/**
+ *  \brief Draw a string in the currently set font.
+ *
+ *  \param renderer The renderer to draw on.
+ *  \param x The X coordinate of the upper left corner of the character.
+ *  \param y The Y coordinate of the upper left corner of the character.
+ *  \param c The character to draw.
+ *
+ *  \returns Returns 0 on success, -1 on failure.
+ */
+int SDLTest_DrawCharacter(SDL_Renderer *renderer, int x, int y, char c);
+
+/**
+ *  \brief Draw a string in the currently set font.
+ *
+ *  \param renderer The renderer to draw on.
+ *  \param x The X coordinate of the upper left corner of the string.
+ *  \param y The Y coordinate of the upper left corner of the string.
+ *  \param s The string to draw.
+ *
+ *  \returns Returns 0 on success, -1 on failure.
+ */
+int SDLTest_DrawString(SDL_Renderer *renderer, int x, int y, const char *s);
+
+
+/**
+ *  \brief Cleanup textures used by font drawing functions.
+ */
+void SDLTest_CleanupTextDrawing(void);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_test_font_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/dependencies/SDL/include/SDL_test_fuzzer.h

@@ -0,0 +1,384 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_test_fuzzer.h
+ *
+ *  Include file for SDL test framework.
+ *
+ *  This code is a part of the SDL2_test library, not the main SDL library.
+ */
+
+/*
+
+  Data generators for fuzzing test data in a reproducible way.
+
+*/
+
+#ifndef SDL_test_fuzzer_h_
+#define SDL_test_fuzzer_h_
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+  Based on GSOC code by Markus Kauppila <markus.kauppila@gmail.com>
+*/
+
+
+/**
+ * \file
+ * Note: The fuzzer implementation uses a static instance of random context
+ * internally which makes it thread-UNsafe.
+ */
+
+/**
+ * Initializes the fuzzer for a test
+ *
+ * \param execKey Execution "Key" that initializes the random number generator uniquely for the test.
+ *
+ */
+void SDLTest_FuzzerInit(Uint64 execKey);
+
+
+/**
+ * Returns a random Uint8
+ *
+ * \returns Generated integer
+ */
+Uint8 SDLTest_RandomUint8(void);
+
+/**
+ * Returns a random Sint8
+ *
+ * \returns Generated signed integer
+ */
+Sint8 SDLTest_RandomSint8(void);
+
+
+/**
+ * Returns a random Uint16
+ *
+ * \returns Generated integer
+ */
+Uint16 SDLTest_RandomUint16(void);
+
+/**
+ * Returns a random Sint16
+ *
+ * \returns Generated signed integer
+ */
+Sint16 SDLTest_RandomSint16(void);
+
+
+/**
+ * Returns a random integer
+ *
+ * \returns Generated integer
+ */
+Sint32 SDLTest_RandomSint32(void);
+
+
+/**
+ * Returns a random positive integer
+ *
+ * \returns Generated integer
+ */
+Uint32 SDLTest_RandomUint32(void);
+
+/**
+ * Returns random Uint64.
+ *
+ * \returns Generated integer
+ */
+Uint64 SDLTest_RandomUint64(void);
+
+
+/**
+ * Returns random Sint64.
+ *
+ * \returns Generated signed integer
+ */
+Sint64 SDLTest_RandomSint64(void);
+
+/**
+ * \returns random float in range [0.0 - 1.0[
+ */
+float SDLTest_RandomUnitFloat(void);
+
+/**
+ * \returns random double in range [0.0 - 1.0[
+ */
+double SDLTest_RandomUnitDouble(void);
+
+/**
+ * \returns random float.
+ *
+ */
+float SDLTest_RandomFloat(void);
+
+/**
+ * \returns random double.
+ *
+ */
+double SDLTest_RandomDouble(void);
+
+/**
+ * Returns a random boundary value for Uint8 within the given boundaries.
+ * Boundaries are inclusive, see the usage examples below. If validDomain
+ * is true, the function will only return valid boundaries, otherwise non-valid
+ * boundaries are also possible.
+ * If boundary1 > boundary2, the values are swapped
+ *
+ * Usage examples:
+ * RandomUint8BoundaryValue(10, 20, SDL_TRUE) returns 10, 11, 19 or 20
+ * RandomUint8BoundaryValue(1, 20, SDL_FALSE) returns 0 or 21
+ * RandomUint8BoundaryValue(0, 99, SDL_FALSE) returns 100
+ * RandomUint8BoundaryValue(0, 255, SDL_FALSE) returns 0 (error set)
+ *
+ * \param boundary1 Lower boundary limit
+ * \param boundary2 Upper boundary limit
+ * \param validDomain Should the generated boundary be valid (=within the bounds) or not?
+ *
+ * \returns Random boundary value for the given range and domain or 0 with error set
+ */
+Uint8 SDLTest_RandomUint8BoundaryValue(Uint8 boundary1, Uint8 boundary2, SDL_bool validDomain);
+
+/**
+ * Returns a random boundary value for Uint16 within the given boundaries.
+ * Boundaries are inclusive, see the usage examples below. If validDomain
+ * is true, the function will only return valid boundaries, otherwise non-valid
+ * boundaries are also possible.
+ * If boundary1 > boundary2, the values are swapped
+ *
+ * Usage examples:
+ * RandomUint16BoundaryValue(10, 20, SDL_TRUE) returns 10, 11, 19 or 20
+ * RandomUint16BoundaryValue(1, 20, SDL_FALSE) returns 0 or 21
+ * RandomUint16BoundaryValue(0, 99, SDL_FALSE) returns 100
+ * RandomUint16BoundaryValue(0, 0xFFFF, SDL_FALSE) returns 0 (error set)
+ *
+ * \param boundary1 Lower boundary limit
+ * \param boundary2 Upper boundary limit
+ * \param validDomain Should the generated boundary be valid (=within the bounds) or not?
+ *
+ * \returns Random boundary value for the given range and domain or 0 with error set
+ */
+Uint16 SDLTest_RandomUint16BoundaryValue(Uint16 boundary1, Uint16 boundary2, SDL_bool validDomain);
+
+/**
+ * Returns a random boundary value for Uint32 within the given boundaries.
+ * Boundaries are inclusive, see the usage examples below. If validDomain
+ * is true, the function will only return valid boundaries, otherwise non-valid
+ * boundaries are also possible.
+ * If boundary1 > boundary2, the values are swapped
+ *
+ * Usage examples:
+ * RandomUint32BoundaryValue(10, 20, SDL_TRUE) returns 10, 11, 19 or 20
+ * RandomUint32BoundaryValue(1, 20, SDL_FALSE) returns 0 or 21
+ * RandomUint32BoundaryValue(0, 99, SDL_FALSE) returns 100
+ * RandomUint32BoundaryValue(0, 0xFFFFFFFF, SDL_FALSE) returns 0 (with error set)
+ *
+ * \param boundary1 Lower boundary limit
+ * \param boundary2 Upper boundary limit
+ * \param validDomain Should the generated boundary be valid (=within the bounds) or not?
+ *
+ * \returns Random boundary value for the given range and domain or 0 with error set
+ */
+Uint32 SDLTest_RandomUint32BoundaryValue(Uint32 boundary1, Uint32 boundary2, SDL_bool validDomain);
+
+/**
+ * Returns a random boundary value for Uint64 within the given boundaries.
+ * Boundaries are inclusive, see the usage examples below. If validDomain
+ * is true, the function will only return valid boundaries, otherwise non-valid
+ * boundaries are also possible.
+ * If boundary1 > boundary2, the values are swapped
+ *
+ * Usage examples:
+ * RandomUint64BoundaryValue(10, 20, SDL_TRUE) returns 10, 11, 19 or 20
+ * RandomUint64BoundaryValue(1, 20, SDL_FALSE) returns 0 or 21
+ * RandomUint64BoundaryValue(0, 99, SDL_FALSE) returns 100
+ * RandomUint64BoundaryValue(0, 0xFFFFFFFFFFFFFFFF, SDL_FALSE) returns 0 (with error set)
+ *
+ * \param boundary1 Lower boundary limit
+ * \param boundary2 Upper boundary limit
+ * \param validDomain Should the generated boundary be valid (=within the bounds) or not?
+ *
+ * \returns Random boundary value for the given range and domain or 0 with error set
+ */
+Uint64 SDLTest_RandomUint64BoundaryValue(Uint64 boundary1, Uint64 boundary2, SDL_bool validDomain);
+
+/**
+ * Returns a random boundary value for Sint8 within the given boundaries.
+ * Boundaries are inclusive, see the usage examples below. If validDomain
+ * is true, the function will only return valid boundaries, otherwise non-valid
+ * boundaries are also possible.
+ * If boundary1 > boundary2, the values are swapped
+ *
+ * Usage examples:
+ * RandomSint8BoundaryValue(-10, 20, SDL_TRUE) returns -11, -10, 19 or 20
+ * RandomSint8BoundaryValue(-100, -10, SDL_FALSE) returns -101 or -9
+ * RandomSint8BoundaryValue(SINT8_MIN, 99, SDL_FALSE) returns 100
+ * RandomSint8BoundaryValue(SINT8_MIN, SINT8_MAX, SDL_FALSE) returns SINT8_MIN (== error value) with error set
+ *
+ * \param boundary1 Lower boundary limit
+ * \param boundary2 Upper boundary limit
+ * \param validDomain Should the generated boundary be valid (=within the bounds) or not?
+ *
+ * \returns Random boundary value for the given range and domain or SINT8_MIN with error set
+ */
+Sint8 SDLTest_RandomSint8BoundaryValue(Sint8 boundary1, Sint8 boundary2, SDL_bool validDomain);
+
+
+/**
+ * Returns a random boundary value for Sint16 within the given boundaries.
+ * Boundaries are inclusive, see the usage examples below. If validDomain
+ * is true, the function will only return valid boundaries, otherwise non-valid
+ * boundaries are also possible.
+ * If boundary1 > boundary2, the values are swapped
+ *
+ * Usage examples:
+ * RandomSint16BoundaryValue(-10, 20, SDL_TRUE) returns -11, -10, 19 or 20
+ * RandomSint16BoundaryValue(-100, -10, SDL_FALSE) returns -101 or -9
+ * RandomSint16BoundaryValue(SINT16_MIN, 99, SDL_FALSE) returns 100
+ * RandomSint16BoundaryValue(SINT16_MIN, SINT16_MAX, SDL_FALSE) returns SINT16_MIN (== error value) with error set
+ *
+ * \param boundary1 Lower boundary limit
+ * \param boundary2 Upper boundary limit
+ * \param validDomain Should the generated boundary be valid (=within the bounds) or not?
+ *
+ * \returns Random boundary value for the given range and domain or SINT16_MIN with error set
+ */
+Sint16 SDLTest_RandomSint16BoundaryValue(Sint16 boundary1, Sint16 boundary2, SDL_bool validDomain);
+
+/**
+ * Returns a random boundary value for Sint32 within the given boundaries.
+ * Boundaries are inclusive, see the usage examples below. If validDomain
+ * is true, the function will only return valid boundaries, otherwise non-valid
+ * boundaries are also possible.
+ * If boundary1 > boundary2, the values are swapped
+ *
+ * Usage examples:
+ * RandomSint32BoundaryValue(-10, 20, SDL_TRUE) returns -11, -10, 19 or 20
+ * RandomSint32BoundaryValue(-100, -10, SDL_FALSE) returns -101 or -9
+ * RandomSint32BoundaryValue(SINT32_MIN, 99, SDL_FALSE) returns 100
+ * RandomSint32BoundaryValue(SINT32_MIN, SINT32_MAX, SDL_FALSE) returns SINT32_MIN (== error value)
+ *
+ * \param boundary1 Lower boundary limit
+ * \param boundary2 Upper boundary limit
+ * \param validDomain Should the generated boundary be valid (=within the bounds) or not?
+ *
+ * \returns Random boundary value for the given range and domain or SINT32_MIN with error set
+ */
+Sint32 SDLTest_RandomSint32BoundaryValue(Sint32 boundary1, Sint32 boundary2, SDL_bool validDomain);
+
+/**
+ * Returns a random boundary value for Sint64 within the given boundaries.
+ * Boundaries are inclusive, see the usage examples below. If validDomain
+ * is true, the function will only return valid boundaries, otherwise non-valid
+ * boundaries are also possible.
+ * If boundary1 > boundary2, the values are swapped
+ *
+ * Usage examples:
+ * RandomSint64BoundaryValue(-10, 20, SDL_TRUE) returns -11, -10, 19 or 20
+ * RandomSint64BoundaryValue(-100, -10, SDL_FALSE) returns -101 or -9
+ * RandomSint64BoundaryValue(SINT64_MIN, 99, SDL_FALSE) returns 100
+ * RandomSint64BoundaryValue(SINT64_MIN, SINT64_MAX, SDL_FALSE) returns SINT64_MIN (== error value) and error set
+ *
+ * \param boundary1 Lower boundary limit
+ * \param boundary2 Upper boundary limit
+ * \param validDomain Should the generated boundary be valid (=within the bounds) or not?
+ *
+ * \returns Random boundary value for the given range and domain or SINT64_MIN with error set
+ */
+Sint64 SDLTest_RandomSint64BoundaryValue(Sint64 boundary1, Sint64 boundary2, SDL_bool validDomain);
+
+
+/**
+ * Returns integer in range [min, max] (inclusive).
+ * Min and max values can be negative values.
+ * If Max in smaller than min, then the values are swapped.
+ * Min and max are the same value, that value will be returned.
+ *
+ * \param min Minimum inclusive value of returned random number
+ * \param max Maximum inclusive value of returned random number
+ *
+ * \returns Generated random integer in range
+ */
+Sint32 SDLTest_RandomIntegerInRange(Sint32 min, Sint32 max);
+
+
+/**
+ * Generates random null-terminated string. The minimum length for
+ * the string is 1 character, maximum length for the string is 255
+ * characters and it can contain ASCII characters from 32 to 126.
+ *
+ * Note: Returned string needs to be deallocated.
+ *
+ * \returns Newly allocated random string; or NULL if length was invalid or string could not be allocated.
+ */
+char * SDLTest_RandomAsciiString(void);
+
+
+/**
+ * Generates random null-terminated string. The maximum length for
+ * the string is defined by the maxLength parameter.
+ * String can contain ASCII characters from 32 to 126.
+ *
+ * Note: Returned string needs to be deallocated.
+ *
+ * \param maxLength The maximum length of the generated string.
+ *
+ * \returns Newly allocated random string; or NULL if maxLength was invalid or string could not be allocated.
+ */
+char * SDLTest_RandomAsciiStringWithMaximumLength(int maxLength);
+
+
+/**
+ * Generates random null-terminated string. The length for
+ * the string is defined by the size parameter.
+ * String can contain ASCII characters from 32 to 126.
+ *
+ * Note: Returned string needs to be deallocated.
+ *
+ * \param size The length of the generated string
+ *
+ * \returns Newly allocated random string; or NULL if size was invalid or string could not be allocated.
+ */
+char * SDLTest_RandomAsciiStringOfSize(int size);
+
+/**
+ * Returns the invocation count for the fuzzer since last ...FuzzerInit.
+ */
+int SDLTest_GetFuzzerInvocationCount(void);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_test_fuzzer_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */