entangledstate-isbn 1.4.0 → 1.4.1

data/src/jpeg-7/jmemdosa.asm

@@ -0,0 +1,379 @@
+;
+; jmemdosa.asm
+;
+; Copyright (C) 1992, Thomas G. Lane.
+; This file is part of the Independent JPEG Group's software.
+; For conditions of distribution and use, see the accompanying README file.
+;
+; This file contains low-level interface routines to support the MS-DOS
+; backing store manager (jmemdos.c).  Routines are provided to access disk
+; files through direct DOS calls, and to access XMS and EMS drivers.
+;
+; This file should assemble with Microsoft's MASM or any compatible
+; assembler (including Borland's Turbo Assembler).  If you haven't got
+; a compatible assembler, better fall back to jmemansi.c or jmemname.c.
+;
+; To minimize dependence on the C compiler's register usage conventions,
+; we save and restore all 8086 registers, even though most compilers only
+; require SI,DI,DS to be preserved.  Also, we use only 16-bit-wide return
+; values, which everybody returns in AX.
+;
+; Based on code contributed by Ge' Weijers.
+;
+
+JMEMDOSA_TXT	segment byte public 'CODE'
+
+		assume	cs:JMEMDOSA_TXT
+
+		public	_jdos_open
+		public	_jdos_close
+		public	_jdos_seek
+		public	_jdos_read
+		public	_jdos_write
+		public	_jxms_getdriver
+		public	_jxms_calldriver
+		public	_jems_available
+		public	_jems_calldriver
+
+;
+; short far jdos_open (short far * handle, char far * filename)
+;
+; Create and open a temporary file
+;
+_jdos_open	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	cx,0			; normal file attributes
+		lds	dx,dword ptr [bp+10]	; get filename pointer
+		mov	ah,3ch			; create file
+		int	21h
+		jc	open_err		; if failed, return error code
+		lds	bx,dword ptr [bp+6]	; get handle pointer
+		mov	word ptr [bx],ax	; save the handle
+		xor	ax,ax			; return zero for OK
+open_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_open	endp
+
+
+;
+; short far jdos_close (short handle)
+;
+; Close the file handle
+;
+_jdos_close	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		mov	ah,3eh			; close file
+		int	21h
+		jc	close_err		; if failed, return error code
+		xor	ax,ax			; return zero for OK
+close_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_close	endp
+
+
+;
+; short far jdos_seek (short handle, long offset)
+;
+; Set file position
+;
+_jdos_seek	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		mov	dx,word ptr [bp+8]	; LS offset
+		mov	cx,word ptr [bp+10]	; MS offset
+		mov	ax,4200h		; absolute seek
+		int	21h
+		jc	seek_err		; if failed, return error code
+		xor	ax,ax			; return zero for OK
+seek_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_seek	endp
+
+
+;
+; short far jdos_read (short handle, void far * buffer, unsigned short count)
+;
+; Read from file
+;
+_jdos_read	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		lds	dx,dword ptr [bp+8]	; buffer address
+		mov	cx,word ptr [bp+12]	; number of bytes
+		mov	ah,3fh			; read file
+		int	21h
+		jc	read_err		; if failed, return error code
+		cmp	ax,word ptr [bp+12]	; make sure all bytes were read
+		je	read_ok
+		mov	ax,1			; else return 1 for not OK
+		jmp	short read_err
+read_ok:	xor	ax,ax			; return zero for OK
+read_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_read	endp
+
+
+;
+; short far jdos_write (short handle, void far * buffer, unsigned short count)
+;
+; Write to file
+;
+_jdos_write	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		lds	dx,dword ptr [bp+8]	; buffer address
+		mov	cx,word ptr [bp+12]	; number of bytes
+		mov	ah,40h			; write file
+		int	21h
+		jc	write_err		; if failed, return error code
+		cmp	ax,word ptr [bp+12]	; make sure all bytes written
+		je	write_ok
+		mov	ax,1			; else return 1 for not OK
+		jmp	short write_err
+write_ok:	xor	ax,ax			; return zero for OK
+write_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_write	endp
+
+
+;
+; void far jxms_getdriver (XMSDRIVER far *)
+;
+; Get the address of the XMS driver, or NULL if not available
+;
+_jxms_getdriver	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov 	ax,4300h		; call multiplex interrupt with
+		int	2fh			; a magic cookie, hex 4300
+		cmp 	al,80h			; AL should contain hex 80
+		je	xmsavail
+		xor 	dx,dx			; no XMS driver available
+		xor 	ax,ax			; return a nil pointer
+		jmp	short xmsavail_done
+xmsavail:	mov 	ax,4310h		; fetch driver address with
+		int	2fh			; another magic cookie
+		mov 	dx,es			; copy address to dx:ax
+		mov 	ax,bx
+xmsavail_done:	les 	bx,dword ptr [bp+6]	; get pointer to return value
+		mov	word ptr es:[bx],ax
+		mov	word ptr es:[bx+2],dx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop	bp
+		ret
+_jxms_getdriver	endp
+
+
+;
+; void far jxms_calldriver (XMSDRIVER, XMScontext far *)
+;
+; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers.
+; These are loaded, the XMS call is performed, and the new values of the
+; AX,DX,BX registers are written back to the context structure.
+;
+_jxms_calldriver 	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
+		mov 	ax,word ptr es:[bx]	; load registers
+		mov 	dx,word ptr es:[bx+2]
+		mov 	si,word ptr es:[bx+6]
+		mov 	ds,word ptr es:[bx+8]
+		mov 	bx,word ptr es:[bx+4]
+		call	dword ptr [bp+6]	; call the driver
+		mov	cx,bx			; save returned BX for a sec
+		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
+		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
+		mov 	word ptr es:[bx+2],dx
+		mov 	word ptr es:[bx+4],cx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jxms_calldriver 	endp
+
+
+;
+; short far jems_available (void)
+;
+; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs)
+;
+_jems_available	proc	far
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	ax,3567h		; get interrupt vector 67h
+		int	21h
+		push	cs
+		pop	ds
+		mov	di,000ah		; check offs 10 in returned seg
+		lea	si,ASCII_device_name	; against literal string
+		mov	cx,8
+		cld
+		repe cmpsb
+		jne	no_ems
+		mov	ax,1			; match, it's there
+		jmp	short avail_done
+no_ems:		xor	ax,ax			; it's not there
+avail_done:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		ret
+
+ASCII_device_name	db	"EMMXXXX0"
+
+_jems_available	endp
+
+
+;
+; void far jems_calldriver (EMScontext far *)
+;
+; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers.
+; These are loaded, the EMS trap is performed, and the new values of the
+; AX,DX,BX registers are written back to the context structure.
+;
+_jems_calldriver	proc far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
+		mov 	ax,word ptr es:[bx]	; load registers
+		mov 	dx,word ptr es:[bx+2]
+		mov 	si,word ptr es:[bx+6]
+		mov 	ds,word ptr es:[bx+8]
+		mov 	bx,word ptr es:[bx+4]
+		int	67h			; call the EMS driver
+		mov	cx,bx			; save returned BX for a sec
+		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
+		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
+		mov 	word ptr es:[bx+2],dx
+		mov 	word ptr es:[bx+4],cx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jems_calldriver	endp
+
+JMEMDOSA_TXT	ends
+
+		end

data/src/jpeg-7/jmemmac.c

@@ -0,0 +1,289 @@
+/*
+ * jmemmac.c
+ *
+ * Copyright (C) 1992-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * jmemmac.c provides an Apple Macintosh implementation of the system-
+ * dependent portion of the JPEG memory manager.
+ *
+ * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the
+ * JPEG_INTERNALS part of jconfig.h.
+ *
+ * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr
+ * instead of malloc and free.  It accurately determines the amount of
+ * memory available by using CompactMem.  Notice that if left to its
+ * own devices, this code can chew up all available space in the
+ * application's zone, with the exception of the rather small "slop"
+ * factor computed in jpeg_mem_available().  The application can ensure
+ * that more space is left over by reducing max_memory_to_use.
+ *
+ * Large images are swapped to disk using temporary files and System 7.0+'s
+ * temporary folder functionality.
+ *
+ * Note that jmemmac.c depends on two features of MacOS that were first
+ * introduced in System 7: FindFolder and the FSSpec-based calls.
+ * If your application uses jmemmac.c and is run under System 6 or earlier,
+ * and the jpeg library decides it needs a temporary file, it will abort,
+ * printing error messages about requiring System 7.  (If no temporary files
+ * are created, it will run fine.)
+ *
+ * If you want to use jmemmac.c in an application that might be used with
+ * System 6 or earlier, then you should remove dependencies on FindFolder
+ * and the FSSpec calls.  You will need to replace FindFolder with some
+ * other mechanism for finding a place to put temporary files, and you
+ * should replace the FSSpec calls with their HFS equivalents:
+ *
+ *     FSpDelete     ->  HDelete
+ *     FSpGetFInfo   ->  HGetFInfo
+ *     FSpCreate     ->  HCreate
+ *     FSpOpenDF     ->  HOpen      *** Note: not HOpenDF ***
+ *     FSMakeFSSpec  ->  (fill in spec by hand.)
+ *
+ * (Use HOpen instead of HOpenDF.  HOpen is just a glue-interface to PBHOpen,
+ * which is on all HFS macs.  HOpenDF is a System 7 addition which avoids the
+ * ages-old problem of names starting with a period.)
+ *
+ * Contributed by Sam Bushell (jsam@iagu.on.net) and
+ * Dan Gildor (gyld@in-touch.com).
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"    /* import the system-dependent declarations */
+
+#ifndef USE_MAC_MEMMGR	/* make sure user got configuration right */
+  You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */
+#endif
+
+#include <Memory.h>     /* we use the MacOS memory manager */
+#include <Files.h>      /* we use the MacOS File stuff */
+#include <Folders.h>    /* we use the MacOS HFS stuff */
+#include <Script.h>     /* for smSystemScript */
+#include <Gestalt.h>    /* we use Gestalt to test for specific functionality */
+
+#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
+#define TEMP_FILE_NAME  "JPG%03d.TMP"
+#endif
+
+static int next_file_num;	/* to distinguish among several temp files */
+
+
+/*
+ * Memory allocation and freeing are controlled by the MacOS library
+ * routines NewPtr() and DisposePtr(), which allocate fixed-address
+ * storage.  Unfortunately, the IJG library isn't smart enough to cope
+ * with relocatable storage.
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) NewPtr(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  DisposePtr((Ptr) object);
+}
+
+
+/*
+ * "Large" objects are treated the same as "small" ones.
+ * NB: we include FAR keywords in the routine declarations simply for
+ * consistency with the rest of the IJG code; FAR should expand to empty
+ * on rational architectures like the Mac.
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) NewPtr(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  DisposePtr((Ptr) object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ */
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  long limit = cinfo->mem->max_memory_to_use - already_allocated;
+  long slop, mem;
+
+  /* Don't ask for more than what application has told us we may use */
+  if (max_bytes_needed > limit && limit > 0)
+    max_bytes_needed = limit;
+  /* Find whether there's a big enough free block in the heap.
+   * CompactMem tries to create a contiguous block of the requested size,
+   * and then returns the size of the largest free block (which could be
+   * much more or much less than we asked for).
+   * We add some slop to ensure we don't use up all available memory.
+   */
+  slop = max_bytes_needed / 16 + 32768L;
+  mem = CompactMem(max_bytes_needed + slop) - slop;
+  if (mem < 0)
+    mem = 0;			/* sigh, couldn't even get the slop */
+  /* Don't take more than the application says we can have */
+  if (mem > limit && limit > 0)
+    mem = limit;
+  return mem;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+
+METHODDEF(void)
+read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		    void FAR * buffer_address,
+		    long file_offset, long byte_count)
+{
+  long bytes = byte_count;
+  long retVal;
+
+  if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+
+  retVal = FSRead ( info->temp_file, &bytes,
+		    (unsigned char *) buffer_address );
+  if ( retVal != noErr || bytes != byte_count )
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		     void FAR * buffer_address,
+		     long file_offset, long byte_count)
+{
+  long bytes = byte_count;
+  long retVal;
+
+  if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+
+  retVal = FSWrite ( info->temp_file, &bytes,
+		     (unsigned char *) buffer_address );
+  if ( retVal != noErr || bytes != byte_count )
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  FSClose ( info->temp_file );
+  FSpDelete ( &(info->tempSpec) );
+}
+
+
+/*
+ * Initial opening of a backing-store object.
+ *
+ * This version uses FindFolder to find the Temporary Items folder,
+ * and puts the temporary file in there.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  short         tmpRef, vRefNum;
+  long          dirID;
+  FInfo         finderInfo;
+  FSSpec        theSpec;
+  Str255        fName;
+  OSErr         osErr;
+  long          gestaltResponse = 0;
+
+  /* Check that FSSpec calls are available. */
+  osErr = Gestalt( gestaltFSAttr, &gestaltResponse );
+  if ( ( osErr != noErr )
+       || !( gestaltResponse & (1<<gestaltHasFSSpecCalls) ) )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required");
+  /* TO DO: add a proper error message to jerror.h. */
+
+  /* Check that FindFolder is available. */
+  osErr = Gestalt( gestaltFindFolderAttr, &gestaltResponse );
+  if ( ( osErr != noErr )
+       || !( gestaltResponse & (1<<gestaltFindFolderPresent) ) )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required.");
+  /* TO DO: add a proper error message to jerror.h. */
+
+  osErr = FindFolder ( kOnSystemDisk, kTemporaryFolderType, kCreateFolder,
+                       &vRefNum, &dirID );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- temporary items folder unavailable");
+  /* TO DO: Try putting the temp files somewhere else. */
+
+  /* Keep generating file names till we find one that's not in use */
+  for (;;) {
+    next_file_num++;		/* advance counter */
+
+    sprintf(info->temp_name, TEMP_FILE_NAME, next_file_num);
+    strcpy ( (Ptr)fName+1, info->temp_name );
+    *fName = strlen (info->temp_name);
+    osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec );
+
+    if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr )
+      break;
+  }
+
+  osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+
+  osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+
+  info->tempSpec = theSpec;
+
+  info->read_backing_store = read_backing_store;
+  info->write_backing_store = write_backing_store;
+  info->close_backing_store = close_backing_store;
+  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  next_file_num = 0;
+
+  /* max_memory_to_use will be initialized to FreeMem()'s result;
+   * the calling application might later reduce it, for example
+   * to leave room to invoke multiple JPEG objects.
+   * Note that FreeMem returns the total number of free bytes;
+   * it may not be possible to allocate a single block of this size.
+   */
+  return FreeMem();
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* no work */
+}