awesome-grpc-that-works 0.12.2 → 0.14.0.dev

data/third_party/boringssl/include/openssl/cast.h

@@ -0,0 +1,96 @@
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.] */
+
+#ifndef OPENSSL_HEADER_CAST_H
+#define OPENSSL_HEADER_CAST_H
+
+#include <openssl/base.h>
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+
+#define CAST_ENCRYPT 1
+#define CAST_DECRYPT 0
+
+#define CAST_BLOCK 8
+#define CAST_KEY_LENGTH 16
+
+typedef struct cast_key_st {
+  uint32_t data[32];
+  int short_key; /* Use reduced rounds for short key */
+} CAST_KEY;
+
+OPENSSL_EXPORT void CAST_set_key(CAST_KEY *key, size_t len,
+                                 const uint8_t *data);
+OPENSSL_EXPORT void CAST_ecb_encrypt(const uint8_t *in, uint8_t *out,
+                                     const CAST_KEY *key, int enc);
+OPENSSL_EXPORT void CAST_encrypt(uint32_t *data, const CAST_KEY *key);
+OPENSSL_EXPORT void CAST_decrypt(uint32_t *data, const CAST_KEY *key);
+OPENSSL_EXPORT void CAST_cbc_encrypt(const uint8_t *in, uint8_t *out,
+                                     long length, const CAST_KEY *ks,
+                                     uint8_t *iv, int enc);
+
+OPENSSL_EXPORT void CAST_cfb64_encrypt(const uint8_t *in, uint8_t *out,
+                                       long length, const CAST_KEY *schedule,
+                                       uint8_t *ivec, int *num, int enc);
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif  /* OPENSSL_HEADER_CAST_H */

data/third_party/boringssl/include/openssl/chacha.h

@@ -0,0 +1,37 @@
+/* Copyright (c) 2014, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+#ifndef OPENSSL_HEADER_CHACHA_H
+#define OPENSSL_HEADER_CHACHA_H
+
+#include <openssl/base.h>
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+
+/* CRYPTO_chacha_20 encrypts |in_len| bytes from |in| with the given key and
+ * nonce and writes the result to |out|, which may be equal to |in|. The
+ * initial block counter is specified by |counter|. */
+OPENSSL_EXPORT void CRYPTO_chacha_20(uint8_t *out, const uint8_t *in,
+                                     size_t in_len, const uint8_t key[32],
+                                     const uint8_t nonce[12], uint32_t counter);
+
+
+#if defined(__cplusplus)
+}  /* extern C */
+#endif
+
+#endif  /* OPENSSL_HEADER_CHACHA_H */

data/third_party/boringssl/include/openssl/cipher.h

@@ -0,0 +1,571 @@
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.] */
+
+#ifndef OPENSSL_HEADER_CIPHER_H
+#define OPENSSL_HEADER_CIPHER_H
+
+#include <openssl/base.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+/* Ciphers. */
+
+
+/* Cipher primitives.
+ *
+ * The following functions return |EVP_CIPHER| objects that implement the named
+ * cipher algorithm. */
+
+OPENSSL_EXPORT const EVP_CIPHER *EVP_rc4(void);
+
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ecb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_cbc(void);
+
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ecb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ctr(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ofb(void);
+
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ecb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ctr(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ofb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_xts(void);
+
+/* EVP_enc_null returns a 'cipher' that passes plaintext through as
+ * ciphertext. */
+OPENSSL_EXPORT const EVP_CIPHER *EVP_enc_null(void);
+
+/* EVP_rc2_cbc returns a cipher that implements 128-bit RC2 in CBC mode. */
+OPENSSL_EXPORT const EVP_CIPHER *EVP_rc2_cbc(void);
+
+/* EVP_rc2_40_cbc returns a cipher that implements 40-bit RC2 in CBC mode. This
+ * is obviously very, very weak and is included only in order to read PKCS#12
+ * files, which often encrypt the certificate chain using this cipher. It is
+ * deliberately not exported. */
+const EVP_CIPHER *EVP_rc2_40_cbc(void);
+
+/* EVP_get_cipherbynid returns the cipher corresponding to the given NID, or
+ * NULL if no such cipher is known. */
+OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbynid(int nid);
+
+
+/* Cipher context allocation.
+ *
+ * An |EVP_CIPHER_CTX| represents the state of an encryption or decryption in
+ * progress. */
+
+/* EVP_CIPHER_CTX_init initialises an, already allocated, |EVP_CIPHER_CTX|. */
+OPENSSL_EXPORT void EVP_CIPHER_CTX_init(EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_new allocates a fresh |EVP_CIPHER_CTX|, calls
+ * |EVP_CIPHER_CTX_init| and returns it, or NULL on allocation failure. */
+OPENSSL_EXPORT EVP_CIPHER_CTX *EVP_CIPHER_CTX_new(void);
+
+/* EVP_CIPHER_CTX_cleanup frees any memory referenced by |ctx|. It returns
+ * one. */
+OPENSSL_EXPORT int EVP_CIPHER_CTX_cleanup(EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_free calls |EVP_CIPHER_CTX_cleanup| on |ctx| and then frees
+ * |ctx| itself. */
+OPENSSL_EXPORT void EVP_CIPHER_CTX_free(EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_copy sets |out| to be a duplicate of the current state of
+ * |in|. The |out| argument must have been previously initialised. */
+OPENSSL_EXPORT int EVP_CIPHER_CTX_copy(EVP_CIPHER_CTX *out,
+                                       const EVP_CIPHER_CTX *in);
+
+
+/* Cipher context configuration. */
+
+/* EVP_CipherInit_ex configures |ctx| for a fresh encryption (or decryption, if
+ * |enc| is zero) operation using |cipher|. If |ctx| has been previously
+ * configured with a cipher then |cipher|, |key| and |iv| may be |NULL| and
+ * |enc| may be -1 to reuse the previous values. The operation will use |key|
+ * as the key and |iv| as the IV (if any). These should have the correct
+ * lengths given by |EVP_CIPHER_key_length| and |EVP_CIPHER_iv_length|. It
+ * returns one on success and zero on error. */
+OPENSSL_EXPORT int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx,
+                                     const EVP_CIPHER *cipher, ENGINE *engine,
+                                     const uint8_t *key, const uint8_t *iv,
+                                     int enc);
+
+/* EVP_EncryptInit_ex calls |EVP_CipherInit_ex| with |enc| equal to one. */
+OPENSSL_EXPORT int EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx,
+                                      const EVP_CIPHER *cipher, ENGINE *impl,
+                                      const uint8_t *key, const uint8_t *iv);
+
+/* EVP_DecryptInit_ex calls |EVP_CipherInit_ex| with |enc| equal to zero. */
+OPENSSL_EXPORT int EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx,
+                                      const EVP_CIPHER *cipher, ENGINE *impl,
+                                      const uint8_t *key, const uint8_t *iv);
+
+
+/* Cipher operations. */
+
+/* EVP_EncryptUpdate encrypts |in_len| bytes from |in| to |out|. The number
+ * of output bytes may be up to |in_len| plus the block length minus one and
+ * |out| must have sufficient space. The number of bytes actually output is
+ * written to |*out_len|. It returns one on success and zero otherwise. */
+OPENSSL_EXPORT int EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                     int *out_len, const uint8_t *in,
+                                     int in_len);
+
+/* EVP_EncryptFinal_ex writes at most a block of ciphertext to |out| and sets
+ * |*out_len| to the number of bytes written. If padding is enabled (the
+ * default) then standard padding is applied to create the final block. If
+ * padding is disabled (with |EVP_CIPHER_CTX_set_padding|) then any partial
+ * block remaining will cause an error. The function returns one on success and
+ * zero otherwise. */
+OPENSSL_EXPORT int EVP_EncryptFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                       int *out_len);
+
+/* EVP_DecryptUpdate decrypts |in_len| bytes from |in| to |out|. The number of
+ * output bytes may be up to |in_len| plus the block length minus one and |out|
+ * must have sufficient space. The number of bytes actually output is written
+ * to |*out_len|. It returns one on success and zero otherwise. */
+OPENSSL_EXPORT int EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                     int *out_len, const uint8_t *in,
+                                     int in_len);
+
+/* EVP_DecryptFinal_ex writes at most a block of ciphertext to |out| and sets
+ * |*out_len| to the number of bytes written. If padding is enabled (the
+ * default) then padding is removed from the final block.
+ *
+ * WARNING: it is unsafe to call this function with unauthenticted
+ * ciphertext if padding is enabled. */
+OPENSSL_EXPORT int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out,
+                                       int *out_len);
+
+/* EVP_Cipher performs a one-shot encryption/decryption operation. No partial
+ * blocks are maintained between calls. However, any internal cipher state is
+ * still updated. For CBC-mode ciphers, the IV is updated to the final
+ * ciphertext block. For stream ciphers, the stream is advanced past the bytes
+ * used. It returns one on success and zero otherwise, unless |EVP_CIPHER_flags|
+ * has |EVP_CIPH_FLAG_CUSTOM_CIPHER| set. Then it returns the number of bytes
+ * written or -1 on error.
+ *
+ * WARNING: this differs from the usual return value convention when using
+ * |EVP_CIPH_FLAG_CUSTOM_CIPHER|.
+ *
+ * TODO(davidben): The normal ciphers currently never fail, even if, e.g.,
+ * |in_len| is not a multiple of the block size for CBC-mode decryption. The
+ * input just gets rounded up while the output gets truncated. This should
+ * either be officially documented or fail. */
+OPENSSL_EXPORT int EVP_Cipher(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                              const uint8_t *in, size_t in_len);
+
+/* EVP_CipherUpdate calls either |EVP_EncryptUpdate| or |EVP_DecryptUpdate|
+ * depending on how |ctx| has been setup. */
+OPENSSL_EXPORT int EVP_CipherUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                    int *out_len, const uint8_t *in,
+                                    int in_len);
+
+/* EVP_CipherFinal_ex calls either |EVP_EncryptFinal_ex| or
+ * |EVP_DecryptFinal_ex| depending on how |ctx| has been setup. */
+OPENSSL_EXPORT int EVP_CipherFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                      int *out_len);
+
+
+/* Cipher context accessors. */
+
+/* EVP_CIPHER_CTX_cipher returns the |EVP_CIPHER| underlying |ctx|, or NULL if
+ * none has been set. */
+OPENSSL_EXPORT const EVP_CIPHER *EVP_CIPHER_CTX_cipher(
+    const EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_nid returns a NID identifying the |EVP_CIPHER| underlying
+ * |ctx| (e.g. |NID_aes_128_gcm|). It will crash if no cipher has been
+ * configured. */
+OPENSSL_EXPORT int EVP_CIPHER_CTX_nid(const EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_block_size returns the block size, in bytes, of the cipher
+ * underlying |ctx|, or one if the cipher is a stream cipher. It will crash if
+ * no cipher has been configured. */
+OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_block_size(const EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_key_length returns the key size, in bytes, of the cipher
+ * underlying |ctx| or zero if no cipher has been configured. */
+OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_key_length(const EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_iv_length returns the IV size, in bytes, of the cipher
+ * underlying |ctx|. It will crash if no cipher has been configured. */
+OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_iv_length(const EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_get_app_data returns the opaque, application data pointer for
+ * |ctx|, or NULL if none has been set. */
+OPENSSL_EXPORT void *EVP_CIPHER_CTX_get_app_data(const EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_set_app_data sets the opaque, application data pointer for
+ * |ctx| to |data|. */
+OPENSSL_EXPORT void EVP_CIPHER_CTX_set_app_data(EVP_CIPHER_CTX *ctx,
+                                                void *data);
+
+/* EVP_CIPHER_CTX_flags returns a value which is the OR of zero or more
+ * |EVP_CIPH_*| flags. It will crash if no cipher has been configured. */
+OPENSSL_EXPORT uint32_t EVP_CIPHER_CTX_flags(const EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_mode returns one of the |EVP_CIPH_*| cipher mode values
+ * enumerated below. It will crash if no cipher has been configured. */
+OPENSSL_EXPORT uint32_t EVP_CIPHER_CTX_mode(const EVP_CIPHER_CTX *ctx);
+
+/* EVP_CIPHER_CTX_ctrl is an |ioctl| like function. The |command| argument
+ * should be one of the |EVP_CTRL_*| values. The |arg| and |ptr| arguments are
+ * specific to the command in question. */
+OPENSSL_EXPORT int EVP_CIPHER_CTX_ctrl(EVP_CIPHER_CTX *ctx, int command,
+                                       int arg, void *ptr);
+
+/* EVP_CIPHER_CTX_set_padding sets whether padding is enabled for |ctx| and
+ * returns one. Pass a non-zero |pad| to enable padding (the default) or zero
+ * to disable. */
+OPENSSL_EXPORT int EVP_CIPHER_CTX_set_padding(EVP_CIPHER_CTX *ctx, int pad);
+
+/* EVP_CIPHER_CTX_set_key_length sets the key length for |ctx|. This is only
+ * valid for ciphers that can take a variable length key. It returns one on
+ * success and zero on error. */
+OPENSSL_EXPORT int EVP_CIPHER_CTX_set_key_length(EVP_CIPHER_CTX *ctx, unsigned key_len);
+
+
+/* Cipher accessors. */
+
+/* EVP_CIPHER_nid returns a NID identifing |cipher|. (For example,
+ * |NID_aes_128_gcm|.) */
+OPENSSL_EXPORT int EVP_CIPHER_nid(const EVP_CIPHER *cipher);
+
+/* EVP_CIPHER_block_size returns the block size, in bytes, for |cipher|, or one
+ * if |cipher| is a stream cipher. */
+OPENSSL_EXPORT unsigned EVP_CIPHER_block_size(const EVP_CIPHER *cipher);
+
+/* EVP_CIPHER_key_length returns the key size, in bytes, for |cipher|. If
+ * |cipher| can take a variable key length then this function returns the
+ * default key length and |EVP_CIPHER_flags| will return a value with
+ * |EVP_CIPH_VARIABLE_LENGTH| set. */
+OPENSSL_EXPORT unsigned EVP_CIPHER_key_length(const EVP_CIPHER *cipher);
+
+/* EVP_CIPHER_iv_length returns the IV size, in bytes, of |cipher|, or zero if
+ * |cipher| doesn't take an IV. */
+OPENSSL_EXPORT unsigned EVP_CIPHER_iv_length(const EVP_CIPHER *cipher);
+
+/* EVP_CIPHER_flags returns a value which is the OR of zero or more
+ * |EVP_CIPH_*| flags. */
+OPENSSL_EXPORT uint32_t EVP_CIPHER_flags(const EVP_CIPHER *cipher);
+
+/* EVP_CIPHER_mode returns one of the cipher mode values enumerated below. */
+OPENSSL_EXPORT uint32_t EVP_CIPHER_mode(const EVP_CIPHER *cipher);
+
+
+/* Key derivation. */
+
+/* EVP_BytesToKey generates a key and IV for the cipher |type| by iterating
+ * |md| |count| times using |data| and |salt|. On entry, the |key| and |iv|
+ * buffers must have enough space to hold a key and IV for |type|. It returns
+ * the length of the key on success or zero on error. */
+OPENSSL_EXPORT int EVP_BytesToKey(const EVP_CIPHER *type, const EVP_MD *md,
+                                  const uint8_t *salt, const uint8_t *data,
+                                  size_t data_len, unsigned count, uint8_t *key,
+                                  uint8_t *iv);
+
+
+/* Cipher modes (for |EVP_CIPHER_mode|). */
+
+#define EVP_CIPH_STREAM_CIPHER 0x0
+#define EVP_CIPH_ECB_MODE 0x1
+#define EVP_CIPH_CBC_MODE 0x2
+#define EVP_CIPH_CFB_MODE 0x3
+#define EVP_CIPH_OFB_MODE 0x4
+#define EVP_CIPH_CTR_MODE 0x5
+#define EVP_CIPH_GCM_MODE 0x6
+#define EVP_CIPH_XTS_MODE 0x7
+
+
+/* Cipher flags (for |EVP_CIPHER_flags|). */
+
+/* EVP_CIPH_VARIABLE_LENGTH indicates that the cipher takes a variable length
+ * key. */
+#define EVP_CIPH_VARIABLE_LENGTH 0x40
+
+/* EVP_CIPH_ALWAYS_CALL_INIT indicates that the |init| function for the cipher
+ * should always be called when initialising a new operation, even if the key
+ * is NULL to indicate that the same key is being used. */
+#define EVP_CIPH_ALWAYS_CALL_INIT 0x80
+
+/* EVP_CIPH_CUSTOM_IV indicates that the cipher manages the IV itself rather
+ * than keeping it in the |iv| member of |EVP_CIPHER_CTX|. */
+#define EVP_CIPH_CUSTOM_IV 0x100
+
+/* EVP_CIPH_CTRL_INIT indicates that EVP_CTRL_INIT should be used when
+ * initialising an |EVP_CIPHER_CTX|. */
+#define EVP_CIPH_CTRL_INIT 0x200
+
+/* EVP_CIPH_FLAG_CUSTOM_CIPHER indicates that the cipher manages blocking
+ * itself. This causes EVP_(En|De)crypt_ex to be simple wrapper functions. */
+#define EVP_CIPH_FLAG_CUSTOM_CIPHER 0x400
+
+/* EVP_CIPH_FLAG_AEAD_CIPHER specifies that the cipher is an AEAD. This is an
+ * older version of the proper AEAD interface. See aead.h for the current
+ * one. */
+#define EVP_CIPH_FLAG_AEAD_CIPHER 0x800
+
+/* EVP_CIPH_CUSTOM_COPY indicates that the |ctrl| callback should be called
+ * with |EVP_CTRL_COPY| at the end of normal |EVP_CIPHER_CTX_copy|
+ * processing. */
+#define EVP_CIPH_CUSTOM_COPY 0x1000
+
+
+/* Deprecated functions */
+
+/* EVP_CipherInit acts like EVP_CipherInit_ex except that |EVP_CIPHER_CTX_init|
+ * is called on |cipher| first, if |cipher| is not NULL. */
+OPENSSL_EXPORT int EVP_CipherInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher,
+                                  const uint8_t *key, const uint8_t *iv,
+                                  int enc);
+
+/* EVP_EncryptInit calls |EVP_CipherInit| with |enc| equal to one. */
+OPENSSL_EXPORT int EVP_EncryptInit(EVP_CIPHER_CTX *ctx,
+                                   const EVP_CIPHER *cipher, const uint8_t *key,
+                                   const uint8_t *iv);
+
+/* EVP_DecryptInit calls |EVP_CipherInit| with |enc| equal to zero. */
+OPENSSL_EXPORT int EVP_DecryptInit(EVP_CIPHER_CTX *ctx,
+                                   const EVP_CIPHER *cipher, const uint8_t *key,
+                                   const uint8_t *iv);
+
+/* EVP_add_cipher_alias does nothing and returns one. */
+OPENSSL_EXPORT int EVP_add_cipher_alias(const char *a, const char *b);
+
+/* EVP_get_cipherbyname returns an |EVP_CIPHER| given a human readable name in
+ * |name|, or NULL if the name is unknown. */
+OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbyname(const char *name);
+
+/* These AEADs are deprecated AES-GCM implementations that set
+ * |EVP_CIPH_FLAG_CUSTOM_CIPHER|. Use |EVP_aead_aes_128_gcm| and
+ * |EVP_aead_aes_256_gcm| instead. */
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_gcm(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_gcm(void);
+
+/* These are deprecated, 192-bit version of AES. */
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ecb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ctr(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_gcm(void);
+
+
+/* Private functions. */
+
+/* EVP_CIPH_NO_PADDING disables padding in block ciphers. */
+#define EVP_CIPH_NO_PADDING 0x800
+
+/* EVP_CIPHER_CTX_ctrl commands. */
+#define EVP_CTRL_INIT 0x0
+#define EVP_CTRL_SET_KEY_LENGTH 0x1
+#define EVP_CTRL_GET_RC2_KEY_BITS 0x2
+#define EVP_CTRL_SET_RC2_KEY_BITS 0x3
+#define EVP_CTRL_GET_RC5_ROUNDS 0x4
+#define EVP_CTRL_SET_RC5_ROUNDS 0x5
+#define EVP_CTRL_RAND_KEY 0x6
+#define EVP_CTRL_PBE_PRF_NID 0x7
+#define EVP_CTRL_COPY 0x8
+#define EVP_CTRL_GCM_SET_IVLEN 0x9
+#define EVP_CTRL_GCM_GET_TAG 0x10
+#define EVP_CTRL_GCM_SET_TAG 0x11
+#define EVP_CTRL_GCM_SET_IV_FIXED 0x12
+#define EVP_CTRL_GCM_IV_GEN 0x13
+#define EVP_CTRL_AEAD_SET_MAC_KEY 0x17
+/* Set the GCM invocation field, decrypt only */
+#define EVP_CTRL_GCM_SET_IV_INV 0x18
+
+/* GCM TLS constants */
+/* Length of fixed part of IV derived from PRF */
+#define EVP_GCM_TLS_FIXED_IV_LEN 4
+/* Length of explicit part of IV part of TLS records */
+#define EVP_GCM_TLS_EXPLICIT_IV_LEN 8
+/* Length of tag for TLS */
+#define EVP_GCM_TLS_TAG_LEN 16
+
+#define EVP_MAX_KEY_LENGTH 64
+#define EVP_MAX_IV_LENGTH 16
+#define EVP_MAX_BLOCK_LENGTH 32
+
+struct evp_cipher_ctx_st {
+  /* cipher contains the underlying cipher for this context. */
+  const EVP_CIPHER *cipher;
+
+  /* app_data is a pointer to opaque, user data. */
+  void *app_data;      /* application stuff */
+
+  /* cipher_data points to the |cipher| specific state. */
+  void *cipher_data;
+
+  /* key_len contains the length of the key, which may differ from
+   * |cipher->key_len| if the cipher can take a variable key length. */
+  unsigned key_len;
+
+  /* encrypt is one if encrypting and zero if decrypting. */
+  int encrypt;
+
+  /* flags contains the OR of zero or more |EVP_CIPH_*| flags, above. */
+  uint32_t flags;
+
+  /* oiv contains the original IV value. */
+  uint8_t oiv[EVP_MAX_IV_LENGTH];
+
+  /* iv contains the current IV value, which may have been updated. */
+  uint8_t iv[EVP_MAX_IV_LENGTH];
+
+  /* buf contains a partial block which is used by, for example, CTR mode to
+   * store unused keystream bytes. */
+  uint8_t buf[EVP_MAX_BLOCK_LENGTH];
+
+  /* buf_len contains the number of bytes of a partial block contained in
+   * |buf|. */
+  int buf_len;
+
+  /* num contains the number of bytes of |iv| which are valid for modes that
+   * manage partial blocks themselves. */
+  int num;
+
+  /* final_used is non-zero if the |final| buffer contains plaintext. */
+  int final_used;
+
+  /* block_mask contains |cipher->block_size| minus one. (The block size
+   * assumed to be a power of two.) */
+  int block_mask;
+
+  uint8_t final[EVP_MAX_BLOCK_LENGTH]; /* possible final block */
+} /* EVP_CIPHER_CTX */;
+
+typedef struct evp_cipher_info_st {
+  const EVP_CIPHER *cipher;
+  unsigned char iv[EVP_MAX_IV_LENGTH];
+} EVP_CIPHER_INFO;
+
+struct evp_cipher_st {
+  /* type contains a NID identifing the cipher. (e.g. NID_aes_128_gcm.) */
+  int nid;
+
+  /* block_size contains the block size, in bytes, of the cipher, or 1 for a
+   * stream cipher. */
+  unsigned block_size;
+
+  /* key_len contains the key size, in bytes, for the cipher. If the cipher
+   * takes a variable key size then this contains the default size. */
+  unsigned key_len;
+
+  /* iv_len contains the IV size, in bytes, or zero if inapplicable. */
+  unsigned iv_len;
+
+  /* ctx_size contains the size, in bytes, of the per-key context for this
+   * cipher. */
+  unsigned ctx_size;
+
+  /* flags contains the OR of a number of flags. See |EVP_CIPH_*|. */
+  uint32_t flags;
+
+  /* app_data is a pointer to opaque, user data. */
+  void *app_data;
+
+  int (*init)(EVP_CIPHER_CTX *ctx, const uint8_t *key, const uint8_t *iv,
+              int enc);
+
+  int (*cipher)(EVP_CIPHER_CTX *ctx, uint8_t *out, const uint8_t *in,
+                size_t inl);
+
+  /* cleanup, if non-NULL, releases memory associated with the context. It is
+   * called if |EVP_CTRL_INIT| succeeds. Note that |init| may not have been
+   * called at this point. */
+  void (*cleanup)(EVP_CIPHER_CTX *);
+
+  int (*ctrl)(EVP_CIPHER_CTX *, int type, int arg, void *ptr);
+};
+
+
+#if defined(__cplusplus)
+}  /* extern C */
+#endif
+
+#define CIPHER_R_AES_KEY_SETUP_FAILED 100
+#define CIPHER_R_BAD_DECRYPT 101
+#define CIPHER_R_BAD_KEY_LENGTH 102
+#define CIPHER_R_BUFFER_TOO_SMALL 103
+#define CIPHER_R_CTRL_NOT_IMPLEMENTED 104
+#define CIPHER_R_CTRL_OPERATION_NOT_IMPLEMENTED 105
+#define CIPHER_R_DATA_NOT_MULTIPLE_OF_BLOCK_LENGTH 106
+#define CIPHER_R_INITIALIZATION_ERROR 107
+#define CIPHER_R_INPUT_NOT_INITIALIZED 108
+#define CIPHER_R_INVALID_AD_SIZE 109
+#define CIPHER_R_INVALID_KEY_LENGTH 110
+#define CIPHER_R_INVALID_NONCE_SIZE 111
+#define CIPHER_R_INVALID_OPERATION 112
+#define CIPHER_R_IV_TOO_LARGE 113
+#define CIPHER_R_NO_CIPHER_SET 114
+#define CIPHER_R_OUTPUT_ALIASES_INPUT 115
+#define CIPHER_R_TAG_TOO_LARGE 116
+#define CIPHER_R_TOO_LARGE 117
+#define CIPHER_R_UNSUPPORTED_AD_SIZE 118
+#define CIPHER_R_UNSUPPORTED_INPUT_SIZE 119
+#define CIPHER_R_UNSUPPORTED_KEY_SIZE 120
+#define CIPHER_R_UNSUPPORTED_NONCE_SIZE 121
+#define CIPHER_R_UNSUPPORTED_TAG_SIZE 122
+#define CIPHER_R_WRONG_FINAL_BLOCK_LENGTH 123
+#define CIPHER_R_NO_DIRECTION_SET 124
+
+#endif  /* OPENSSL_HEADER_CIPHER_H */