pyvex 9.2.189__cp312-cp312-win_amd64.whl

pyvex/include/libvex_ir.h

@@ -0,0 +1,3113 @@
+
+/*---------------------------------------------------------------*/
+/*--- begin                                       libvex_ir.h ---*/
+/*---------------------------------------------------------------*/
+
+/*
+   This file is part of Valgrind, a dynamic binary instrumentation
+   framework.
+
+   Copyright (C) 2004-2015 OpenWorks LLP
+      info@open-works.net
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful, but
+   WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+   02110-1301, USA.
+
+   The GNU General Public License is contained in the file COPYING.
+
+   Neither the names of the U.S. Department of Energy nor the
+   University of California nor the names of its contributors may be
+   used to endorse or promote products derived from this software
+   without prior written permission.
+*/
+
+#ifndef __LIBVEX_IR_H
+#define __LIBVEX_IR_H
+
+#include "libvex_basictypes.h"
+
+   
+/*---------------------------------------------------------------*/
+/*--- High-level IR description                               ---*/
+/*---------------------------------------------------------------*/
+
+/* Vex IR is an architecture-neutral intermediate representation.
+   Unlike some IRs in systems similar to Vex, it is not like assembly
+   language (ie. a list of instructions).  Rather, it is more like the
+   IR that might be used in a compiler.
+
+   Code blocks
+   ~~~~~~~~~~~
+   The code is broken into small code blocks ("superblocks", type:
+   'IRSB').  Each code block typically represents from 1 to perhaps 50
+   instructions.  IRSBs are single-entry, multiple-exit code blocks.
+   Each IRSB contains three things:
+   - a type environment, which indicates the type of each temporary
+     value present in the IRSB
+   - a list of statements, which represent code
+   - a jump that exits from the end the IRSB
+   Because the blocks are multiple-exit, there can be additional
+   conditional exit statements that cause control to leave the IRSB
+   before the final exit.  Also because of this, IRSBs can cover
+   multiple non-consecutive sequences of code (up to 3).  These are
+   recorded in the type VexGuestExtents (see libvex.h).
+
+   Statements and expressions
+   ~~~~~~~~~~~~~~~~~~~~~~~~~~
+   Statements (type 'IRStmt') represent operations with side-effects,
+   eg.  guest register writes, stores, and assignments to temporaries.
+   Expressions (type 'IRExpr') represent operations without
+   side-effects, eg. arithmetic operations, loads, constants.
+   Expressions can contain sub-expressions, forming expression trees,
+   eg. (3 + (4 * load(addr1)).
+
+   Storage of guest state
+   ~~~~~~~~~~~~~~~~~~~~~~
+   The "guest state" contains the guest registers of the guest machine
+   (ie.  the machine that we are simulating).  It is stored by default
+   in a block of memory supplied by the user of the VEX library,
+   generally referred to as the guest state (area).  To operate on
+   these registers, one must first read ("Get") them from the guest
+   state into a temporary value.  Afterwards, one can write ("Put")
+   them back into the guest state.
+
+   Get and Put are characterised by a byte offset into the guest
+   state, a small integer which effectively gives the identity of the
+   referenced guest register, and a type, which indicates the size of
+   the value to be transferred.
+
+   The basic "Get" and "Put" operations are sufficient to model normal
+   fixed registers on the guest.  Selected areas of the guest state
+   can be treated as a circular array of registers (type:
+   'IRRegArray'), which can be indexed at run-time.  This is done with
+   the "GetI" and "PutI" primitives.  This is necessary to describe
+   rotating register files, for example the x87 FPU stack, SPARC
+   register windows, and the Itanium register files.
+
+   Examples, and flattened vs. unflattened code
+   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+   For example, consider this x86 instruction:
+     
+     addl %eax, %ebx
+
+   One Vex IR translation for this code would be this:
+
+     ------ IMark(0x24F275, 7, 0) ------
+     t3 = GET:I32(0)             # get %eax, a 32-bit integer
+     t2 = GET:I32(12)            # get %ebx, a 32-bit integer
+     t1 = Add32(t3,t2)           # addl
+     PUT(0) = t1                 # put %eax
+
+   (For simplicity, this ignores the effects on the condition codes, and
+   the update of the instruction pointer.)
+
+   The "IMark" is an IR statement that doesn't represent actual code.
+   Instead it indicates the address and length of the original
+   instruction.  The numbers 0 and 12 are offsets into the guest state
+   for %eax and %ebx.  The full list of offsets for an architecture
+   <ARCH> can be found in the type VexGuest<ARCH>State in the file
+   VEX/pub/libvex_guest_<ARCH>.h.
+
+   The five statements in this example are:
+   - the IMark
+   - three assignments to temporaries
+   - one register write (put)
+
+   The six expressions in this example are:
+   - two register reads (gets)
+   - one arithmetic (add) operation
+   - three temporaries (two nested within the Add32, one in the PUT)
+
+   The above IR is "flattened", ie. all sub-expressions are "atoms",
+   either constants or temporaries.  An equivalent, unflattened version
+   would be:
+   
+     PUT(0) = Add32(GET:I32(0), GET:I32(12))
+
+   IR is guaranteed to be flattened at instrumentation-time.  This makes
+   instrumentation easier.  Equivalent flattened and unflattened IR
+   typically results in the same generated code.
+
+   Another example, this one showing loads and stores:
+
+     addl %edx,4(%eax)
+
+   This becomes (again ignoring condition code and instruction pointer
+   updates):
+
+     ------ IMark(0x4000ABA, 3, 0) ------
+     t3 = Add32(GET:I32(0),0x4:I32)
+     t2 = LDle:I32(t3)
+     t1 = GET:I32(8)
+     t0 = Add32(t2,t1)
+     STle(t3) = t0
+
+   The "le" in "LDle" and "STle" is short for "little-endian".
+
+   No need for deallocations
+   ~~~~~~~~~~~~~~~~~~~~~~~~~
+   Although there are allocation functions for various data structures
+   in this file, there are no deallocation functions.  This is because
+   Vex uses a memory allocation scheme that automatically reclaims the
+   memory used by allocated structures once translation is completed.
+   This makes things easier for tools that instruments/transforms code
+   blocks.
+
+   SSAness and typing
+   ~~~~~~~~~~~~~~~~~~
+   The IR is fully typed.  For every IRSB (IR block) it is possible to
+   say unambiguously whether or not it is correctly typed.
+   Incorrectly typed IR has no meaning and the VEX will refuse to
+   process it.  At various points during processing VEX typechecks the
+   IR and aborts if any violations are found.  This seems overkill but
+   makes it a great deal easier to build a reliable JIT.
+
+   IR also has the SSA property.  SSA stands for Static Single
+   Assignment, and what it means is that each IR temporary may be
+   assigned to only once.  This idea became widely used in compiler
+   construction in the mid to late 90s.  It makes many IR-level
+   transformations/code improvements easier, simpler and faster.
+   Whenever it typechecks an IR block, VEX also checks the SSA
+   property holds, and will abort if not so.  So SSAness is
+   mechanically and rigidly enforced.
+*/
+
+/*---------------------------------------------------------------*/
+/*--- Type definitions for the IR                             ---*/
+/*---------------------------------------------------------------*/
+
+/* General comments about naming schemes:
+
+   All publically visible functions contain the name of the primary
+   type on which they operate (IRFoo, IRBar, etc).  Hence you should
+   be able to identify these functions by grepping for "IR[A-Z]".
+
+   For some type 'IRFoo':
+
+   - ppIRFoo is the printing method for IRFoo, printing it to the
+     output channel specified in the LibVEX_Initialise call.
+
+   - eqIRFoo is a structural equality predicate for IRFoos.
+
+   - deepCopyIRFoo is a deep copy constructor for IRFoos. 
+     It recursively traverses the entire argument tree and
+     produces a complete new tree.  All types have a deep copy
+     constructor.
+
+   - shallowCopyIRFoo is the shallow copy constructor for IRFoos.
+     It creates a new top-level copy of the supplied object,
+     but does not copy any sub-objects.  Only some types have a
+     shallow copy constructor.
+*/
+
+/* ------------------ Types ------------------ */
+
+/* A type indicates the size of a value, and whether it's an integer, a
+   float, or a vector (SIMD) value. */
+typedef 
+   enum { 
+      Ity_INVALID=0x1100,
+      Ity_I1, 
+      Ity_I8, 
+      Ity_I16, 
+      Ity_I32, 
+      Ity_I64,
+      Ity_I128,  /* 128-bit scalar */
+      Ity_F16,   /* 16 bit float */
+      Ity_F32,   /* IEEE 754 float */
+      Ity_F64,   /* IEEE 754 double */
+      Ity_D32,   /* 32-bit Decimal floating point */
+      Ity_D64,   /* 64-bit Decimal floating point */
+      Ity_D128,  /* 128-bit Decimal floating point */
+      Ity_F128,  /* 128-bit floating point; implementation defined */
+      Ity_V128,  /* 128-bit SIMD */
+      Ity_V256   /* 256-bit SIMD */
+   }
+   IRType;
+
+/* Pretty-print an IRType */
+extern void ppIRType ( IRType );
+
+/* Get the size (in bytes) of an IRType */ 
+extern Int sizeofIRType ( IRType );
+
+/* Translate 1/2/4/8 into Ity_I{8,16,32,64} respectively.  Asserts on
+   any other input. */
+extern IRType integerIRTypeOfSize ( Int szB );
+
+
+/* ------------------ Endianness ------------------ */
+
+/* IREndness is used in load IRExprs and store IRStmts. */
+typedef
+   enum { 
+      Iend_LE=0x1200, /* little endian */
+      Iend_BE          /* big endian */
+   }
+   IREndness;
+
+
+/* ------------------ Constants ------------------ */
+
+/* IRConsts are used within 'Const' and 'Exit' IRExprs. */
+
+/* The various kinds of constant. */
+typedef
+   enum { 
+      Ico_U1=0x1300,
+      Ico_U8, 
+      Ico_U16, 
+      Ico_U32, 
+      Ico_U64,
+      Ico_F32,   /* 32-bit IEEE754 floating */
+      Ico_F32i,  /* 32-bit unsigned int to be interpreted literally
+                    as a IEEE754 single value. */
+      Ico_F64,   /* 64-bit IEEE754 floating */
+      Ico_F64i,  /* 64-bit unsigned int to be interpreted literally
+                    as a IEEE754 double value. */
+      Ico_V128,  /* 128-bit restricted vector constant, with 1 bit
+                    (repeated 8 times) for each of the 16 x 1-byte lanes */
+      Ico_V256   /* 256-bit restricted vector constant, with 1 bit
+                    (repeated 8 times) for each of the 32 x 1-byte lanes */
+   }
+   IRConstTag;
+
+/* A constant.  Stored as a tagged union.  'tag' indicates what kind of
+   constant this is.  'Ico' is the union that holds the fields.  If an
+   IRConst 'c' has c.tag equal to Ico_U32, then it's a 32-bit constant,
+   and its value can be accessed with 'c.Ico.U32'. */
+typedef
+   struct _IRConst {
+      IRConstTag tag;
+      union {
+         Bool   U1;
+         UChar  U8;
+         UShort U16;
+         UInt   U32;
+         ULong  U64;
+         Float  F32;
+         UInt   F32i;
+         Double F64;
+         ULong  F64i;
+         UShort V128;   /* 16-bit value; see Ico_V128 comment above */
+         UInt   V256;   /* 32-bit value; see Ico_V256 comment above */
+      } Ico;
+   }
+   IRConst;
+
+/* IRConst constructors */
+extern IRConst* IRConst_U1   ( Bool );
+extern IRConst* IRConst_U8   ( UChar );
+extern IRConst* IRConst_U16  ( UShort );
+extern IRConst* IRConst_U32  ( UInt );
+extern IRConst* IRConst_U64  ( ULong );
+extern IRConst* IRConst_F32  ( Float );
+extern IRConst* IRConst_F32i ( UInt );
+extern IRConst* IRConst_F64  ( Double );
+extern IRConst* IRConst_F64i ( ULong );
+extern IRConst* IRConst_V128 ( UShort );
+extern IRConst* IRConst_V256 ( UInt );
+
+/* Deep-copy an IRConst */
+extern IRConst* deepCopyIRConst ( const IRConst* );
+
+/* Pretty-print an IRConst */
+extern void ppIRConst ( const IRConst* );
+
+/* Compare two IRConsts for equality */
+extern Bool eqIRConst ( const IRConst*, const IRConst* );
+
+
+/* ------------------ Call targets ------------------ */
+
+/* Describes a helper function to call.  The name part is purely for
+   pretty printing and not actually used.  regparms=n tells the back
+   end that the callee has been declared
+   "__attribute__((regparm(n)))", although indirectly using the
+   VEX_REGPARM(n) macro.  On some targets (x86) the back end will need
+   to construct a non-standard sequence to call a function declared
+   like this.
+
+   mcx_mask is a sop to Memcheck.  It indicates which args should be
+   considered 'always defined' when lazily computing definedness of
+   the result.  Bit 0 of mcx_mask corresponds to args[0], bit 1 to
+   args[1], etc.  If a bit is set, the corresponding arg is excluded
+   (hence "x" in "mcx") from definedness checking.  
+*/
+
+typedef
+   struct {
+      Int          regparms;
+      const HChar* name;
+      void*        addr;
+      UInt         mcx_mask;
+   }
+   IRCallee;
+
+/* Create an IRCallee. */
+extern IRCallee* mkIRCallee ( Int regparms, const HChar* name, void* addr );
+
+/* Deep-copy an IRCallee. */
+extern IRCallee* deepCopyIRCallee ( const IRCallee* );
+
+/* Pretty-print an IRCallee. */
+extern void ppIRCallee ( const IRCallee* );
+
+
+/* ------------------ Guest state arrays ------------------ */
+
+/* This describes a section of the guest state that we want to
+   be able to index at run time, so as to be able to describe 
+   indexed or rotating register files on the guest. */
+typedef
+   struct {
+      Int    base;   /* guest state offset of start of indexed area */
+      IRType elemTy; /* type of each element in the indexed area */
+      Int    nElems; /* number of elements in the indexed area */
+   }
+   IRRegArray;
+
+extern IRRegArray* mkIRRegArray ( Int, IRType, Int );
+
+extern IRRegArray* deepCopyIRRegArray ( const IRRegArray* );
+
+extern void ppIRRegArray ( const IRRegArray* );
+extern Bool eqIRRegArray ( const IRRegArray*, const IRRegArray* );
+
+
+/* ------------------ Temporaries ------------------ */
+
+/* This represents a temporary, eg. t1.  The IR optimiser relies on the
+   fact that IRTemps are 32-bit ints.  Do not change them to be ints of
+   any other size. */
+typedef UInt IRTemp;
+
+/* Pretty-print an IRTemp. */
+extern void ppIRTemp ( IRTemp );
+
+#define IRTemp_INVALID ((IRTemp)0xFFFFFFFF)
+
+
+/* --------------- Primops (arity 1,2,3 and 4) --------------- */
+
+/* Primitive operations that are used in Unop, Binop, Triop and Qop
+   IRExprs.  Once we take into account integer, floating point and SIMD
+   operations of all the different sizes, there are quite a lot of them.
+   Most instructions supported by the architectures that Vex supports
+   (x86, PPC, etc) are represented.  Some more obscure ones (eg. cpuid)
+   are not;  they are instead handled with dirty helpers that emulate
+   their functionality.  Such obscure ones are thus not directly visible
+   in the IR, but their effects on guest state (memory and registers) 
+   are made visible via the annotations in IRDirty structures.
+*/
+typedef
+   enum { 
+      /* -- Do not change this ordering.  The IR generators rely on
+            (eg) Iop_Add64 == IopAdd8 + 3. -- */
+
+      Iop_INVALID=0x1400,
+      Iop_Add8,  Iop_Add16,  Iop_Add32,  Iop_Add64,
+      Iop_Sub8,  Iop_Sub16,  Iop_Sub32,  Iop_Sub64,
+      /* Signless mul.  MullS/MullU is elsewhere. */
+      Iop_Mul8,  Iop_Mul16,  Iop_Mul32,  Iop_Mul64,
+      Iop_Or8,   Iop_Or16,   Iop_Or32,   Iop_Or64,
+      Iop_And8,  Iop_And16,  Iop_And32,  Iop_And64,
+      Iop_Xor8,  Iop_Xor16,  Iop_Xor32,  Iop_Xor64,
+      Iop_Shl8,  Iop_Shl16,  Iop_Shl32,  Iop_Shl64,
+      Iop_Shr8,  Iop_Shr16,  Iop_Shr32,  Iop_Shr64,
+      Iop_Sar8,  Iop_Sar16,  Iop_Sar32,  Iop_Sar64,
+      /* Integer comparisons. */
+      Iop_CmpEQ8,  Iop_CmpEQ16,  Iop_CmpEQ32,  Iop_CmpEQ64,
+      Iop_CmpNE8,  Iop_CmpNE16,  Iop_CmpNE32,  Iop_CmpNE64,
+      /* Tags for unary ops */
+      Iop_Not8,  Iop_Not16,  Iop_Not32,  Iop_Not64,
+
+      /* Exactly like CmpEQ8/16/32/64, but carrying the additional
+         hint that these compute the success/failure of a CAS
+         operation, and hence are almost certainly applied to two
+         copies of the same value, which in turn has implications for
+         Memcheck's instrumentation. */
+      Iop_CasCmpEQ8, Iop_CasCmpEQ16, Iop_CasCmpEQ32, Iop_CasCmpEQ64,
+      Iop_CasCmpNE8, Iop_CasCmpNE16, Iop_CasCmpNE32, Iop_CasCmpNE64,
+
+      /* Exactly like CmpNE8/16/32/64, but carrying the additional
+         hint that these needs expensive definedness tracking. */
+      Iop_ExpCmpNE8, Iop_ExpCmpNE16, Iop_ExpCmpNE32, Iop_ExpCmpNE64,
+
+      /* -- Ordering not important after here. -- */
+
+      /* Widening multiplies */
+      Iop_MullS8, Iop_MullS16, Iop_MullS32, Iop_MullS64,
+      Iop_MullU8, Iop_MullU16, Iop_MullU32, Iop_MullU64,
+
+      /* Wierdo integer stuff */
+      Iop_Clz64, Iop_Clz32,   /* count leading zeroes */
+      Iop_Ctz64, Iop_Ctz32,   /* count trailing zeros */
+      /* Ctz64/Ctz32/Clz64/Clz32 are UNDEFINED when given arguments of
+         zero.  You must ensure they are never given a zero argument.
+      */
+
+      /* Standard integer comparisons */
+      Iop_CmpLT32S, Iop_CmpLT64S,
+      Iop_CmpLE32S, Iop_CmpLE64S,
+      Iop_CmpLT32U, Iop_CmpLT64U,
+      Iop_CmpLE32U, Iop_CmpLE64U,
+
+      /* As a sop to Valgrind-Memcheck, the following are useful. */
+      Iop_CmpNEZ8, Iop_CmpNEZ16,  Iop_CmpNEZ32,  Iop_CmpNEZ64,
+      Iop_CmpwNEZ32, Iop_CmpwNEZ64, /* all-0s -> all-Os; other -> all-1s */
+      Iop_Left8, Iop_Left16, Iop_Left32, Iop_Left64, /*  \x -> x | -x */
+      Iop_Max32U, /* unsigned max */
+
+      /* PowerPC-style 3-way integer comparisons.  Without them it is
+         difficult to simulate PPC efficiently.
+         op(x,y) | x < y  = 0x8 else 
+                 | x > y  = 0x4 else
+                 | x == y = 0x2
+      */
+      Iop_CmpORD32U, Iop_CmpORD64U,
+      Iop_CmpORD32S, Iop_CmpORD64S,
+
+      /* Division */
+      /* TODO: clarify semantics wrt rounding, negative values, whatever */
+      Iop_DivU32,   // :: I32,I32 -> I32 (simple div, no mod)
+      Iop_DivS32,   // ditto, signed
+      Iop_DivU64,   // :: I64,I64 -> I64 (simple div, no mod)
+      Iop_DivS64,   // ditto, signed
+      Iop_DivU64E,  // :: I64,I64 -> I64 (dividend is 64-bit arg (hi)
+                    //                    concat with 64 0's (low))
+      Iop_DivS64E,  // ditto, signed
+      Iop_DivU32E,  // :: I32,I32 -> I32 (dividend is 32-bit arg (hi)
+                    // concat with 32 0's (low))
+      Iop_DivS32E,  // ditto, signed
+
+      Iop_DivModU64to32, // :: I64,I32 -> I64
+                         // of which lo half is div and hi half is mod
+      Iop_DivModS64to32, // ditto, signed
+
+      Iop_DivModU128to64, // :: V128,I64 -> V128
+                          // of which lo half is div and hi half is mod
+      Iop_DivModS128to64, // ditto, signed
+
+      Iop_DivModS64to64, // :: I64,I64 -> I128
+                         // of which lo half is div and hi half is mod
+
+      /* Integer conversions.  Some of these are redundant (eg
+         Iop_64to8 is the same as Iop_64to32 and then Iop_32to8), but
+         having a complete set reduces the typical dynamic size of IR
+         and makes the instruction selectors easier to write. */
+
+      /* Widening conversions */
+      Iop_8Uto16, Iop_8Uto32,  Iop_8Uto64,
+                  Iop_16Uto32, Iop_16Uto64,
+                               Iop_32Uto64,
+      Iop_8Sto16, Iop_8Sto32,  Iop_8Sto64,
+                  Iop_16Sto32, Iop_16Sto64,
+                               Iop_32Sto64,
+
+      /* Narrowing conversions */
+      Iop_64to8, Iop_32to8, Iop_64to16,
+      /* 8 <-> 16 bit conversions */
+      Iop_16to8,      // :: I16 -> I8, low half
+      Iop_16HIto8,    // :: I16 -> I8, high half
+      Iop_8HLto16,    // :: (I8,I8) -> I16
+      /* 16 <-> 32 bit conversions */
+      Iop_32to16,     // :: I32 -> I16, low half
+      Iop_32HIto16,   // :: I32 -> I16, high half
+      Iop_16HLto32,   // :: (I16,I16) -> I32
+      /* 32 <-> 64 bit conversions */
+      Iop_64to32,     // :: I64 -> I32, low half
+      Iop_64HIto32,   // :: I64 -> I32, high half
+      Iop_32HLto64,   // :: (I32,I32) -> I64
+      /* 64 <-> 128 bit conversions */
+      Iop_128to64,    // :: I128 -> I64, low half
+      Iop_128HIto64,  // :: I128 -> I64, high half
+      Iop_64HLto128,  // :: (I64,I64) -> I128
+      /* 1-bit stuff */
+      Iop_Not1,   /* :: Ity_Bit -> Ity_Bit */
+      Iop_32to1,  /* :: Ity_I32 -> Ity_Bit, just select bit[0] */
+      Iop_64to1,  /* :: Ity_I64 -> Ity_Bit, just select bit[0] */
+      Iop_1Uto8,  /* :: Ity_Bit -> Ity_I8,  unsigned widen */
+      Iop_1Uto32, /* :: Ity_Bit -> Ity_I32, unsigned widen */
+      Iop_1Uto64, /* :: Ity_Bit -> Ity_I64, unsigned widen */
+      Iop_1Sto8,  /* :: Ity_Bit -> Ity_I8,  signed widen */
+      Iop_1Sto16, /* :: Ity_Bit -> Ity_I16, signed widen */
+      Iop_1Sto32, /* :: Ity_Bit -> Ity_I32, signed widen */
+      Iop_1Sto64, /* :: Ity_Bit -> Ity_I64, signed widen */
+
+      /* ------ Floating point.  We try to be IEEE754 compliant. ------ */
+
+      /* --- Simple stuff as mandated by 754. --- */
+
+      /* Binary operations, with rounding. */
+      /* :: IRRoundingMode(I32) x F64 x F64 -> F64 */ 
+      Iop_AddF64, Iop_SubF64, Iop_MulF64, Iop_DivF64,
+
+      /* :: IRRoundingMode(I32) x F32 x F32 -> F32 */ 
+      Iop_AddF32, Iop_SubF32, Iop_MulF32, Iop_DivF32,
+
+      /* Variants of the above which produce a 64-bit result but which
+         round their result to a IEEE float range first. */
+      /* :: IRRoundingMode(I32) x F64 x F64 -> F64 */ 
+      Iop_AddF64r32, Iop_SubF64r32, Iop_MulF64r32, Iop_DivF64r32, 
+
+      /* Unary operations, without rounding. */
+      /* :: F64 -> F64 */
+      Iop_NegF64, Iop_AbsF64,
+
+      /* :: F32 -> F32 */
+      Iop_NegF32, Iop_AbsF32,
+
+      /* Unary operations, with rounding. */
+      /* :: IRRoundingMode(I32) x F64 -> F64 */
+      Iop_SqrtF64,
+
+      /* :: IRRoundingMode(I32) x F32 -> F32 */
+      Iop_SqrtF32,
+
+      /* Comparison, yielding GT/LT/EQ/UN(ordered), as per the following:
+            0x45 Unordered
+            0x01 LT
+            0x00 GT
+            0x40 EQ
+         This just happens to be the Intel encoding.  The values
+         are recorded in the type IRCmpF64Result.
+      */
+      /* :: F64 x F64 -> IRCmpF64Result(I32) */
+      Iop_CmpF64,
+      Iop_CmpF32,
+      Iop_CmpF128,
+
+      /* --- Int to/from FP conversions. --- */
+
+      /* For the most part, these take a first argument :: Ity_I32 (as
+         IRRoundingMode) which is an indication of the rounding mode
+         to use, as per the following encoding ("the standard
+         encoding"):
+            00b  to nearest (the default)
+            01b  to -infinity
+            10b  to +infinity
+            11b  to zero
+         This just happens to be the Intel encoding.  For reference only,
+         the PPC encoding is:
+            00b  to nearest (the default)
+            01b  to zero
+            10b  to +infinity
+            11b  to -infinity
+         Any PPC -> IR front end will have to translate these PPC
+         encodings, as encoded in the guest state, to the standard
+         encodings, to pass to the primops.
+         For reference only, the ARM VFP encoding is:
+            00b  to nearest
+            01b  to +infinity
+            10b  to -infinity
+            11b  to zero
+         Again, this will have to be converted to the standard encoding
+         to pass to primops.
+
+         If one of these conversions gets an out-of-range condition,
+         or a NaN, as an argument, the result is host-defined.  On x86
+         the "integer indefinite" value 0x80..00 is produced.  On PPC
+         it is either 0x80..00 or 0x7F..FF depending on the sign of
+         the argument.
+
+         On ARMvfp, when converting to a signed integer result, the
+         overflow result is 0x80..00 for negative args and 0x7F..FF
+         for positive args.  For unsigned integer results it is
+         0x00..00 and 0xFF..FF respectively.
+
+         Rounding is required whenever the destination type cannot
+         represent exactly all values of the source type.
+      */
+      Iop_F64toI16S, /* IRRoundingMode(I32) x F64 -> signed I16 */
+      Iop_F64toI32S, /* IRRoundingMode(I32) x F64 -> signed I32 */
+      Iop_F64toI64S, /* IRRoundingMode(I32) x F64 -> signed I64 */
+      Iop_F64toI64U, /* IRRoundingMode(I32) x F64 -> unsigned I64 */
+
+      Iop_F64toI32U, /* IRRoundingMode(I32) x F64 -> unsigned I32 */
+
+      Iop_I32StoF64, /*                       signed I32 -> F64 */
+      Iop_I64StoF64, /* IRRoundingMode(I32) x signed I64 -> F64 */
+      Iop_I64UtoF64, /* IRRoundingMode(I32) x unsigned I64 -> F64 */
+      Iop_I64UtoF32, /* IRRoundingMode(I32) x unsigned I64 -> F32 */
+
+      Iop_I32UtoF32, /* IRRoundingMode(I32) x unsigned I32 -> F32 */
+      Iop_I32UtoF64, /*                       unsigned I32 -> F64 */
+
+      Iop_F32toI32S, /* IRRoundingMode(I32) x F32 -> signed I32 */
+      Iop_F32toI64S, /* IRRoundingMode(I32) x F32 -> signed I64 */
+      Iop_F32toI32U, /* IRRoundingMode(I32) x F32 -> unsigned I32 */
+      Iop_F32toI64U, /* IRRoundingMode(I32) x F32 -> unsigned I64 */
+
+      Iop_I32StoF32, /* IRRoundingMode(I32) x signed I32 -> F32 */
+      Iop_I64StoF32, /* IRRoundingMode(I32) x signed I64 -> F32 */
+
+      /* Conversion between floating point formats */
+      Iop_F32toF64,  /*                       F32 -> F64 */
+      Iop_F64toF32,  /* IRRoundingMode(I32) x F64 -> F32 */
+
+      /* Reinterpretation.  Take an F64 and produce an I64 with 
+         the same bit pattern, or vice versa. */
+      Iop_ReinterpF64asI64, Iop_ReinterpI64asF64,
+      Iop_ReinterpF32asI32, Iop_ReinterpI32asF32,
+
+      /* Support for 128-bit floating point */
+      Iop_F64HLtoF128,/* (high half of F128,low half of F128) -> F128 */
+      Iop_F128HItoF64,/* F128 -> high half of F128 into a F64 register */
+      Iop_F128LOtoF64,/* F128 -> low  half of F128 into a F64 register */
+
+      /* :: IRRoundingMode(I32) x F128 x F128 -> F128 */
+      Iop_AddF128, Iop_SubF128, Iop_MulF128, Iop_DivF128,
+      Iop_MAddF128,    // (A * B) + C
+      Iop_MSubF128,    // (A * B) - C
+      Iop_NegMAddF128, // -((A * B) + C)
+      Iop_NegMSubF128, // -((A * B) - C)
+
+      /* :: F128 -> F128 */
+      Iop_NegF128, Iop_AbsF128,
+
+      /* :: IRRoundingMode(I32) x F128 -> F128 */
+      Iop_SqrtF128,
+
+      Iop_I32StoF128, /*                signed I32  -> F128 */
+      Iop_I64StoF128, /*                signed I64  -> F128 */
+      Iop_I32UtoF128, /*              unsigned I32  -> F128 */
+      Iop_I64UtoF128, /*              unsigned I64  -> F128 */
+      Iop_F32toF128,  /*                       F32  -> F128 */
+      Iop_F64toF128,  /*                       F64  -> F128 */
+
+      Iop_F128toI32S, /* IRRoundingMode(I32) x F128 -> signed I32  */
+      Iop_F128toI64S, /* IRRoundingMode(I32) x F128 -> signed I64  */
+      Iop_F128toI32U, /* IRRoundingMode(I32) x F128 -> unsigned I32  */
+      Iop_F128toI64U, /* IRRoundingMode(I32) x F128 -> unsigned I64  */
+      Iop_F128toI128S,/* IRRoundingMode(I32) x F128 -> signed I128 */
+      Iop_F128toF64,  /* IRRoundingMode(I32) x F128 -> F64         */
+      Iop_F128toF32,  /* IRRoundingMode(I32) x F128 -> F32         */
+      Iop_RndF128,    /* IRRoundingMode(I32) x F128 -> F128         */
+
+      /* Truncate to the specified value, source and result
+       * are stroed in a F128 register.
+       */
+      Iop_TruncF128toI32S,  /* truncate F128 -> I32         */
+      Iop_TruncF128toI32U,  /* truncate F128 -> I32         */
+      Iop_TruncF128toI64U,  /* truncate F128 -> I64         */
+      Iop_TruncF128toI64S,  /* truncate F128 -> I64         */
+
+      /* --- guest x86/amd64 specifics, not mandated by 754. --- */
+
+      /* Binary ops, with rounding. */
+      /* :: IRRoundingMode(I32) x F64 x F64 -> F64 */ 
+      Iop_AtanF64,       /* FPATAN,  arctan(arg1/arg2)       */
+      Iop_Yl2xF64,       /* FYL2X,   arg1 * log2(arg2)       */
+      Iop_Yl2xp1F64,     /* FYL2XP1, arg1 * log2(arg2+1.0)   */
+      Iop_PRemF64,       /* FPREM,   non-IEEE remainder(arg1/arg2)    */
+      Iop_PRemC3210F64,  /* C3210 flags resulting from FPREM, :: I32 */
+      Iop_PRem1F64,      /* FPREM1,  IEEE remainder(arg1/arg2)    */
+      Iop_PRem1C3210F64, /* C3210 flags resulting from FPREM1, :: I32 */
+      Iop_ScaleF64,      /* FSCALE,  arg1 * (2^RoundTowardsZero(arg2)) */
+      /* Note that on x86 guest, PRem1{C3210} has the same behaviour
+         as the IEEE mandated RemF64, except it is limited in the
+         range of its operand.  Hence the partialness. */
+
+      /* Unary ops, with rounding. */
+      /* :: IRRoundingMode(I32) x F64 -> F64 */
+      Iop_SinF64,    /* FSIN */
+      Iop_CosF64,    /* FCOS */
+      Iop_TanF64,    /* FTAN */
+      Iop_2xm1F64,   /* (2^arg - 1.0) */
+      Iop_RoundF128toInt, /* F128 value to nearest integral value (still
+                             as F128) */
+      Iop_RoundF64toInt, /* F64 value to nearest integral value (still
+                            as F64) */
+      Iop_RoundF32toInt, /* F32 value to nearest integral value (still
+                            as F32) */
+
+      /* --- guest s390 specifics, not mandated by 754. --- */
+
+      /* Fused multiply-add/sub */
+      /* :: IRRoundingMode(I32) x F32 x F32 x F32 -> F32
+            (computes arg2 * arg3 +/- arg4) */ 
+      Iop_MAddF32, Iop_MSubF32,
+
+      /* --- guest ppc32/64 specifics, not mandated by 754. --- */
+
+      /* Ternary operations, with rounding. */
+      /* Fused multiply-add/sub, with 112-bit intermediate
+         precision for ppc.
+         Also used to implement fused multiply-add/sub for s390. */
+      /* :: IRRoundingMode(I32) x F64 x F64 x F64 -> F64 
+            (computes arg2 * arg3 +/- arg4) */ 
+      Iop_MAddF64, Iop_MSubF64,
+
+      /* Variants of the above which produce a 64-bit result but which
+         round their result to a IEEE float range first. */
+      /* :: IRRoundingMode(I32) x F64 x F64 x F64 -> F64 */ 
+      Iop_MAddF64r32, Iop_MSubF64r32,
+
+      /* :: F64 -> F64 */
+      Iop_RSqrtEst5GoodF64, /* reciprocal square root estimate, 5 good bits */
+      Iop_RoundF64toF64_NEAREST, /* frin */
+      Iop_RoundF64toF64_NegINF,  /* frim */ 
+      Iop_RoundF64toF64_PosINF,  /* frip */
+      Iop_RoundF64toF64_ZERO,    /* friz */
+
+      /* :: F64 -> F32 */
+      Iop_TruncF64asF32, /* do F64->F32 truncation as per 'fsts' */
+
+      /* :: IRRoundingMode(I32) x F64 -> F64 */
+      Iop_RoundF64toF32, /* round F64 to nearest F32 value (still as F64) */
+      /* NB: pretty much the same as Iop_F64toF32, except no change 
+         of type. */
+
+      /* --- guest arm64 specifics, not mandated by 754. --- */
+
+      Iop_RecpExpF64,  /* FRECPX d  :: IRRoundingMode(I32) x F64 -> F64 */
+      Iop_RecpExpF32,  /* FRECPX s  :: IRRoundingMode(I32) x F32 -> F32 */
+
+      /* --------- Possibly required by IEEE 754-2008. --------- */
+
+      Iop_MaxNumF64,  /* max, F64, numerical operand if other is a qNaN */
+      Iop_MinNumF64,  /* min, F64, ditto */
+      Iop_MaxNumF32,  /* max, F32, ditto */
+      Iop_MinNumF32,  /* min, F32, ditto */
+
+      /* ------------------ 16-bit scalar FP ------------------ */
+
+      Iop_F16toF64,  /*                       F16 -> F64 */
+      Iop_F64toF16,  /* IRRoundingMode(I32) x F64 -> F16 */
+
+      Iop_F16toF32,  /*                       F16 -> F32 */
+      Iop_F32toF16,  /* IRRoundingMode(I32) x F32 -> F16 */
+
+      /* ------------------ 32-bit SIMD Integer ------------------ */
+
+      /* 32x1 saturating add/sub (ok, well, not really SIMD :) */
+      Iop_QAdd32S,
+      Iop_QSub32S,
+
+      /* 16x2 add/sub, also signed/unsigned saturating variants */
+      Iop_Add16x2, Iop_Sub16x2,
+      Iop_QAdd16Sx2, Iop_QAdd16Ux2,
+      Iop_QSub16Sx2, Iop_QSub16Ux2,
+
+      /* 16x2 signed/unsigned halving add/sub.  For each lane, these
+         compute bits 16:1 of (eg) sx(argL) + sx(argR),
+         or zx(argL) - zx(argR) etc. */
+      Iop_HAdd16Ux2, Iop_HAdd16Sx2,
+      Iop_HSub16Ux2, Iop_HSub16Sx2,
+
+      /* 8x4 add/sub, also signed/unsigned saturating variants */
+      Iop_Add8x4, Iop_Sub8x4,
+      Iop_QAdd8Sx4, Iop_QAdd8Ux4,
+      Iop_QSub8Sx4, Iop_QSub8Ux4,
+
+      /* 8x4 signed/unsigned halving add/sub.  For each lane, these
+         compute bits 8:1 of (eg) sx(argL) + sx(argR),
+         or zx(argL) - zx(argR) etc. */
+      Iop_HAdd8Ux4, Iop_HAdd8Sx4,
+      Iop_HSub8Ux4, Iop_HSub8Sx4,
+
+      /* 8x4 sum of absolute unsigned differences. */
+      Iop_Sad8Ux4,
+
+      /* MISC (vector integer cmp != 0) */
+      Iop_CmpNEZ16x2, Iop_CmpNEZ8x4,
+
+      /* ------------------ 64-bit SIMD FP ------------------------ */
+
+      /* Convertion to/from int */
+      Iop_I32UtoFx2,  Iop_I32StoFx2,    /* I32x4 -> F32x4 */
+      Iop_FtoI32Ux2_RZ,  Iop_FtoI32Sx2_RZ,    /* F32x4 -> I32x4 */
+      /* Fixed32 format is floating-point number with fixed number of fraction
+         bits. The number of fraction bits is passed as a second argument of
+         type I8. */
+      Iop_F32ToFixed32Ux2_RZ, Iop_F32ToFixed32Sx2_RZ, /* fp -> fixed-point */
+      Iop_Fixed32UToF32x2_RN, Iop_Fixed32SToF32x2_RN, /* fixed-point -> fp */
+
+      /* Binary operations */
+      Iop_Max32Fx2,      Iop_Min32Fx2,
+      /* Pairwise Min and Max. See integer pairwise operations for more
+         details. */
+      Iop_PwMax32Fx2,    Iop_PwMin32Fx2,
+      /* Note: For the following compares, the arm front-end assumes a
+         nan in a lane of either argument returns zero for that lane. */
+      Iop_CmpEQ32Fx2, Iop_CmpGT32Fx2, Iop_CmpGE32Fx2,
+
+      /* Vector Reciprocal Estimate finds an approximate reciprocal of each
+      element in the operand vector, and places the results in the destination
+      vector.  */
+      Iop_RecipEst32Fx2,
+
+      /* Vector Reciprocal Step computes (2.0 - arg1 * arg2).
+         Note, that if one of the arguments is zero and another one is infinity
+         of arbitrary sign the result of the operation is 2.0. */
+      Iop_RecipStep32Fx2,
+
+      /* Vector Reciprocal Square Root Estimate finds an approximate reciprocal
+         square root of each element in the operand vector. */
+      Iop_RSqrtEst32Fx2,
+
+      /* Vector Reciprocal Square Root Step computes (3.0 - arg1 * arg2) / 2.0.
+         Note, that of one of the arguments is zero and another one is infiinty
+         of arbitrary sign the result of the operation is 1.5. */
+      Iop_RSqrtStep32Fx2,
+
+      /* Unary */
+      Iop_Neg32Fx2, Iop_Abs32Fx2,
+
+      /* ------------------ 64-bit SIMD Integer. ------------------ */
+
+      /* MISC (vector integer cmp != 0) */
+      Iop_CmpNEZ8x8, Iop_CmpNEZ16x4, Iop_CmpNEZ32x2,
+
+      /* ADDITION (normal / unsigned sat / signed sat) */
+      Iop_Add8x8,   Iop_Add16x4,   Iop_Add32x2,
+      Iop_QAdd8Ux8, Iop_QAdd16Ux4, Iop_QAdd32Ux2, Iop_QAdd64Ux1,
+      Iop_QAdd8Sx8, Iop_QAdd16Sx4, Iop_QAdd32Sx2, Iop_QAdd64Sx1,
+
+      /* PAIRWISE operations */
+      /* Iop_PwFoo16x4( [a,b,c,d], [e,f,g,h] ) =
+            [Foo16(a,b), Foo16(c,d), Foo16(e,f), Foo16(g,h)] */
+      Iop_PwAdd8x8,  Iop_PwAdd16x4,  Iop_PwAdd32x2,
+      Iop_PwMax8Sx8, Iop_PwMax16Sx4, Iop_PwMax32Sx2,
+      Iop_PwMax8Ux8, Iop_PwMax16Ux4, Iop_PwMax32Ux2,
+      Iop_PwMin8Sx8, Iop_PwMin16Sx4, Iop_PwMin32Sx2,
+      Iop_PwMin8Ux8, Iop_PwMin16Ux4, Iop_PwMin32Ux2,
+      /* Longening variant is unary. The resulting vector contains two times
+         less elements than operand, but they are two times wider.
+         Example:
+            Iop_PAddL16Ux4( [a,b,c,d] ) = [a+b,c+d]
+               where a+b and c+d are unsigned 32-bit values. */
+      Iop_PwAddL8Ux8, Iop_PwAddL16Ux4, Iop_PwAddL32Ux2,
+      Iop_PwAddL8Sx8, Iop_PwAddL16Sx4, Iop_PwAddL32Sx2,
+
+      /* SUBTRACTION (normal / unsigned sat / signed sat) */
+      Iop_Sub8x8,   Iop_Sub16x4,   Iop_Sub32x2,
+      Iop_QSub8Ux8, Iop_QSub16Ux4, Iop_QSub32Ux2, Iop_QSub64Ux1,
+      Iop_QSub8Sx8, Iop_QSub16Sx4, Iop_QSub32Sx2, Iop_QSub64Sx1,
+
+      /* ABSOLUTE VALUE */
+      Iop_Abs8x8, Iop_Abs16x4, Iop_Abs32x2,
+
+      /* MULTIPLICATION (normal / high half of signed/unsigned / plynomial ) */
+      Iop_Mul8x8, Iop_Mul16x4, Iop_Mul32x2,
+      Iop_Mul32Fx2,
+      Iop_MulHi16Ux4,
+      Iop_MulHi16Sx4,
+      /* Plynomial multiplication treats it's arguments as coefficients of
+         polynoms over {0, 1}. */
+      Iop_PolynomialMul8x8,
+
+      /* Vector Saturating Doubling Multiply Returning High Half and
+         Vector Saturating Rounding Doubling Multiply Returning High Half */
+      /* These IROp's multiply corresponding elements in two vectors, double
+         the results, and place the most significant half of the final results
+         in the destination vector. The results are truncated or rounded. If
+         any of the results overflow, they are saturated. */
+      Iop_QDMulHi16Sx4, Iop_QDMulHi32Sx2,
+      Iop_QRDMulHi16Sx4, Iop_QRDMulHi32Sx2,
+
+      /* AVERAGING: note: (arg1 + arg2 + 1) >>u 1 */
+      Iop_Avg8Ux8,
+      Iop_Avg16Ux4,
+
+      /* MIN/MAX */
+      Iop_Max8Sx8, Iop_Max16Sx4, Iop_Max32Sx2,
+      Iop_Max8Ux8, Iop_Max16Ux4, Iop_Max32Ux2,
+      Iop_Min8Sx8, Iop_Min16Sx4, Iop_Min32Sx2,
+      Iop_Min8Ux8, Iop_Min16Ux4, Iop_Min32Ux2,
+
+      /* COMPARISON */
+      Iop_CmpEQ8x8,  Iop_CmpEQ16x4,  Iop_CmpEQ32x2,
+      Iop_CmpGT8Ux8, Iop_CmpGT16Ux4, Iop_CmpGT32Ux2,
+      Iop_CmpGT8Sx8, Iop_CmpGT16Sx4, Iop_CmpGT32Sx2,
+
+      /* COUNT ones / leading zeroes / leading sign bits (not including topmost
+         bit) */
+      Iop_Cnt8x8,
+      Iop_Clz8x8, Iop_Clz16x4, Iop_Clz32x2,
+      Iop_Cls8x8, Iop_Cls16x4, Iop_Cls32x2,
+      Iop_Clz64x2,
+
+      /*Vector COUNT trailing zeros */
+      Iop_Ctz8x16, Iop_Ctz16x8, Iop_Ctz32x4, Iop_Ctz64x2, 
+
+      /* VECTOR x VECTOR SHIFT / ROTATE */
+      Iop_Shl8x8, Iop_Shl16x4, Iop_Shl32x2,
+      Iop_Shr8x8, Iop_Shr16x4, Iop_Shr32x2,
+      Iop_Sar8x8, Iop_Sar16x4, Iop_Sar32x2,
+      Iop_Sal8x8, Iop_Sal16x4, Iop_Sal32x2, Iop_Sal64x1,
+
+      /* VECTOR x SCALAR SHIFT (shift amt :: Ity_I8) */
+      Iop_ShlN8x8, Iop_ShlN16x4, Iop_ShlN32x2,
+      Iop_ShrN8x8, Iop_ShrN16x4, Iop_ShrN32x2,
+      Iop_SarN8x8, Iop_SarN16x4, Iop_SarN32x2,
+
+      /* VECTOR x VECTOR SATURATING SHIFT */
+      Iop_QShl8x8, Iop_QShl16x4, Iop_QShl32x2, Iop_QShl64x1,
+      Iop_QSal8x8, Iop_QSal16x4, Iop_QSal32x2, Iop_QSal64x1,
+      /* VECTOR x INTEGER SATURATING SHIFT */
+      Iop_QShlNsatSU8x8,  Iop_QShlNsatSU16x4,
+      Iop_QShlNsatSU32x2, Iop_QShlNsatSU64x1,
+      Iop_QShlNsatUU8x8,  Iop_QShlNsatUU16x4,
+      Iop_QShlNsatUU32x2, Iop_QShlNsatUU64x1,
+      Iop_QShlNsatSS8x8,  Iop_QShlNsatSS16x4,
+      Iop_QShlNsatSS32x2, Iop_QShlNsatSS64x1,
+
+      /* NARROWING (binary) 
+         -- narrow 2xI64 into 1xI64, hi half from left arg */
+      /* For saturated narrowing, I believe there are 4 variants of
+         the basic arithmetic operation, depending on the signedness
+         of argument and result.  Here are examples that exemplify
+         what I mean:
+
+         QNarrow16Uto8U ( UShort x )  if (x >u 255) x = 255;
+                                      return x[7:0];
+
+         QNarrow16Sto8S ( Short x )   if (x <s -128) x = -128;
+                                      if (x >s  127) x = 127;
+                                      return x[7:0];
+
+         QNarrow16Uto8S ( UShort x )  if (x >u 127) x = 127;
+                                      return x[7:0];
+
+         QNarrow16Sto8U ( Short x )   if (x <s 0)   x = 0;
+                                      if (x >s 255) x = 255;
+                                      return x[7:0];
+      */
+      Iop_QNarrowBin16Sto8Ux8,
+      Iop_QNarrowBin16Sto8Sx8, Iop_QNarrowBin32Sto16Sx4,
+      Iop_NarrowBin16to8x8,    Iop_NarrowBin32to16x4,
+
+      /* INTERLEAVING */
+      /* Interleave lanes from low or high halves of
+         operands.  Most-significant result lane is from the left
+         arg. */
+      Iop_InterleaveHI8x8, Iop_InterleaveHI16x4, Iop_InterleaveHI32x2,
+      Iop_InterleaveLO8x8, Iop_InterleaveLO16x4, Iop_InterleaveLO32x2,
+      /* Interleave odd/even lanes of operands.  Most-significant result lane
+         is from the left arg.  Note that Interleave{Odd,Even}Lanes32x2 are
+         identical to Interleave{HI,LO}32x2 and so are omitted.*/
+      Iop_InterleaveOddLanes8x8, Iop_InterleaveEvenLanes8x8,
+      Iop_InterleaveOddLanes16x4, Iop_InterleaveEvenLanes16x4,
+
+      /* CONCATENATION -- build a new value by concatenating either
+         the even or odd lanes of both operands.  Note that
+         Cat{Odd,Even}Lanes32x2 are identical to Interleave{HI,LO}32x2
+         and so are omitted. */
+      Iop_CatOddLanes8x8, Iop_CatOddLanes16x4,
+      Iop_CatEvenLanes8x8, Iop_CatEvenLanes16x4,
+
+      /* GET / SET elements of VECTOR
+         GET is binop (I64, I8) -> I<elem_size>
+         SET is triop (I64, I8, I<elem_size>) -> I64 */
+      /* Note: the arm back-end handles only constant second argument */
+      Iop_GetElem8x8, Iop_GetElem16x4, Iop_GetElem32x2,
+      Iop_SetElem8x8, Iop_SetElem16x4, Iop_SetElem32x2,
+
+      /* DUPLICATING -- copy value to all lanes */
+      Iop_Dup8x8,   Iop_Dup16x4,   Iop_Dup32x2,
+
+      /* SLICE -- produces the lowest 64 bits of (arg1:arg2) >> (8 * arg3).
+         arg3 is a shift amount in bytes and may be between 0 and 8
+         inclusive.  When 0, the result is arg2; when 8, the result is arg1.
+         Not all back ends handle all values.  The arm32 and arm64 back
+         ends handle only immediate arg3 values. */
+      Iop_Slice64,  // (I64, I64, I8) -> I64
+
+      /* REVERSE the order of chunks in vector lanes.  Chunks must be
+         smaller than the vector lanes (obviously) and so may be 8-,
+         16- and 32-bit in size. */
+      /* Examples:
+            Reverse8sIn16_x4([a,b,c,d,e,f,g,h]) = [b,a,d,c,f,e,h,g]
+            Reverse8sIn32_x2([a,b,c,d,e,f,g,h]) = [d,c,b,a,h,g,f,e]
+            Reverse8sIn64_x1([a,b,c,d,e,f,g,h]) = [h,g,f,e,d,c,b,a] */
+      Iop_Reverse8sIn16_x4,
+      Iop_Reverse8sIn32_x2, Iop_Reverse16sIn32_x2,
+      Iop_Reverse8sIn64_x1, Iop_Reverse16sIn64_x1, Iop_Reverse32sIn64_x1,
+
+      /* PERMUTING -- copy src bytes to dst,
+         as indexed by control vector bytes:
+            for i in 0 .. 7 . result[i] = argL[ argR[i] ] 
+         argR[i] values may only be in the range 0 .. 7, else behaviour
+         is undefined. */
+      Iop_Perm8x8,
+
+      /* MISC CONVERSION -- get high bits of each byte lane, a la
+         x86/amd64 pmovmskb */
+      Iop_GetMSBs8x8, /* I64 -> I8 */
+
+      /* Vector Reciprocal Estimate and Vector Reciprocal Square Root Estimate
+         See floating-point equivalents for details. */
+      Iop_RecipEst32Ux2, Iop_RSqrtEst32Ux2,
+
+      /* ------------------ Decimal Floating Point ------------------ */
+
+      /* ARITHMETIC INSTRUCTIONS   64-bit
+	 ----------------------------------
+	 IRRoundingMode(I32) X D64 X D64 -> D64
+      */
+      Iop_AddD64, Iop_SubD64, Iop_MulD64, Iop_DivD64,
+
+      /* ARITHMETIC INSTRUCTIONS  128-bit
+	 ----------------------------------
+	 IRRoundingMode(I32) X D128 X D128 -> D128
+      */
+      Iop_AddD128, Iop_SubD128, Iop_MulD128, Iop_DivD128,
+
+      /* SHIFT SIGNIFICAND INSTRUCTIONS
+       *    The DFP significand is shifted by the number of digits specified
+       *    by the U8 operand.  Digits shifted out of the leftmost digit are
+       *    lost. Zeros are supplied to the vacated positions on the right.
+       *    The sign of the result is the same as the sign of the original
+       *    operand.
+       *
+       * D64 x U8  -> D64    left shift and right shift respectively */
+      Iop_ShlD64, Iop_ShrD64,
+
+      /* D128 x U8  -> D128  left shift and right shift respectively */
+      Iop_ShlD128, Iop_ShrD128,
+
+
+      /* FORMAT CONVERSION INSTRUCTIONS
+       *   D32 -> D64
+       */
+      Iop_D32toD64,
+
+      /*   D64 -> D128 */
+      Iop_D64toD128, 
+
+      /*   I32S -> D128 */
+      Iop_I32StoD128,
+
+      /*   I32U -> D128 */
+      Iop_I32UtoD128,
+
+      /*   I64S -> D128 */
+      Iop_I64StoD128, 
+
+      /*   I64U -> D128 */
+      Iop_I64UtoD128,
+
+      /*   IRRoundingMode(I32) x D64 -> D32 */
+      Iop_D64toD32,
+
+      /*   IRRoundingMode(I32) x D128 -> D64 */
+      Iop_D128toD64,
+
+      /*   I32S -> D64 */
+      Iop_I32StoD64,
+
+      /*   I32U -> D64 */
+      Iop_I32UtoD64,
+
+      /*   IRRoundingMode(I32) x I64 -> D64 */
+      Iop_I64StoD64,
+
+      /*   IRRoundingMode(I32) x I64 -> D64 */
+      Iop_I64UtoD64,
+
+      /*   IRRoundingMode(I32) x D64 -> I32 */
+      Iop_D64toI32S,
+
+      /*   IRRoundingMode(I32) x D64 -> I32 */
+      Iop_D64toI32U,
+
+      /*   IRRoundingMode(I32) x D64 -> I64 */
+      Iop_D64toI64S,
+
+      /*   IRRoundingMode(I32) x D64 -> I64 */
+      Iop_D64toI64U,
+
+      /*   IRRoundingMode(I32) x D128 -> I32 */
+      Iop_D128toI32S,
+
+      /*   IRRoundingMode(I32) x D128 -> I32 */
+      Iop_D128toI32U,
+
+      /*   IRRoundingMode(I32) x D128 -> I64 */
+      Iop_D128toI64S,
+
+      /*   IRRoundingMode(I32) x D128 -> I64 */
+      Iop_D128toI64U,
+
+      /*   IRRoundingMode(I32) x F32 -> D32 */
+      Iop_F32toD32,
+
+      /*   IRRoundingMode(I32) x F32 -> D64 */
+      Iop_F32toD64,
+
+      /*   IRRoundingMode(I32) x F32 -> D128 */
+      Iop_F32toD128,
+
+      /*   IRRoundingMode(I32) x F64 -> D32 */
+      Iop_F64toD32,
+
+      /*   IRRoundingMode(I32) x F64 -> D64 */
+      Iop_F64toD64,
+
+      /*   IRRoundingMode(I32) x F64 -> D128 */
+      Iop_F64toD128,
+
+      /*   IRRoundingMode(I32) x F128 -> D32 */
+      Iop_F128toD32,
+
+      /*   IRRoundingMode(I32) x F128 -> D64 */
+      Iop_F128toD64,
+
+      /*   IRRoundingMode(I32) x F128 -> D128 */
+      Iop_F128toD128,
+
+      /*   IRRoundingMode(I32) x D32 -> F32 */
+      Iop_D32toF32,
+
+      /*   IRRoundingMode(I32) x D32 -> F64 */
+      Iop_D32toF64,
+
+      /*   IRRoundingMode(I32) x D32 -> F128 */
+      Iop_D32toF128,
+
+      /*   IRRoundingMode(I32) x D64 -> F32 */
+      Iop_D64toF32,
+
+      /*   IRRoundingMode(I32) x D64 -> F64 */
+      Iop_D64toF64,
+
+      /*   IRRoundingMode(I32) x D64 -> F128 */
+      Iop_D64toF128,
+
+      /*   IRRoundingMode(I32) x D128 -> F32 */
+      Iop_D128toF32,
+
+      /*   IRRoundingMode(I32) x D128 -> F64 */
+      Iop_D128toF64,
+
+      /*   IRRoundingMode(I32) x D128 -> F128 */
+      Iop_D128toF128,
+
+      /* ROUNDING INSTRUCTIONS
+       * IRRoundingMode(I32) x D64 -> D64
+       * The D64 operand, if a finite number, it is rounded to a
+       * floating point integer value, i.e. no fractional part.
+       */
+      Iop_RoundD64toInt,
+
+      /* IRRoundingMode(I32) x D128 -> D128 */
+      Iop_RoundD128toInt,
+
+      /* COMPARE INSTRUCTIONS
+       * D64 x D64 -> IRCmpD64Result(I32) */
+      Iop_CmpD64,
+
+      /* D128 x D128 -> IRCmpD128Result(I32) */
+      Iop_CmpD128,
+
+      /* COMPARE BIASED EXPONENET INSTRUCTIONS
+       * D64 x D64 -> IRCmpD64Result(I32) */
+      Iop_CmpExpD64,
+
+      /* D128 x D128 -> IRCmpD128Result(I32) */
+      Iop_CmpExpD128,
+
+      /* QUANTIZE AND ROUND INSTRUCTIONS
+       * The source operand is converted and rounded to the form with the 
+       * immediate exponent specified by the rounding and exponent parameter.
+       *
+       * The second operand is converted and rounded to the form
+       * of the first operand's exponent and the rounded based on the specified
+       * rounding mode parameter.
+       *
+       * IRRoundingMode(I32) x D64 x D64-> D64 */
+      Iop_QuantizeD64,
+
+      /* IRRoundingMode(I32) x D128 x D128 -> D128 */
+      Iop_QuantizeD128,
+
+      /* IRRoundingMode(I32) x I8 x D64 -> D64
+       *    The Decimal Floating point operand is rounded to the requested 
+       *    significance given by the I8 operand as specified by the rounding 
+       *    mode.
+       */
+      Iop_SignificanceRoundD64,
+
+      /* IRRoundingMode(I32) x I8 x D128 -> D128 */
+      Iop_SignificanceRoundD128,
+
+      /* EXTRACT AND INSERT INSTRUCTIONS
+       * D64 -> I64
+       *    The exponent of the D32 or D64 operand is extracted.  The 
+       *    extracted exponent is converted to a 64-bit signed binary integer.
+       */
+      Iop_ExtractExpD64,
+
+      /* D128 -> I64 */
+      Iop_ExtractExpD128,
+
+      /* D64 -> I64
+       * The number of significand digits of the D64 operand is extracted.
+       * The number is stored as a 64-bit signed binary integer.
+       */
+      Iop_ExtractSigD64,
+
+      /* D128 -> I64 */
+      Iop_ExtractSigD128,
+
+      /* I64 x D64  -> D64
+       *    The exponent is specified by the first I64 operand the signed
+       *    significand is given by the second I64 value.  The result is a D64
+       *    value consisting of the specified significand and exponent whose 
+       *    sign is that of the specified significand.
+       */
+      Iop_InsertExpD64,
+
+      /* I64 x D128 -> D128 */
+      Iop_InsertExpD128,
+
+      /* Support for 128-bit DFP type */
+      Iop_D64HLtoD128, Iop_D128HItoD64, Iop_D128LOtoD64,
+
+      /*  I64 -> I64  
+       *     Convert 50-bit densely packed BCD string to 60 bit BCD string
+       */
+      Iop_DPBtoBCD,
+
+      /* I64 -> I64
+       *     Convert 60 bit BCD string to 50-bit densely packed BCD string
+       */
+      Iop_BCDtoDPB,
+
+      /* BCD arithmetic instructions, (V128, V128) -> V128
+       * The BCD format is the same as that used in the BCD<->DPB conversion
+       * routines, except using 124 digits (vs 60) plus the trailing 4-bit
+       * signed code. */
+      Iop_BCDAdd, Iop_BCDSub,
+
+      /* Conversion signed 128-bit integer to signed BCD 128-bit */
+      Iop_I128StoBCD128,
+
+      /* Conversion signed BCD 128-bit to 128-bit integer */
+      Iop_BCD128toI128S,
+
+      /* Conversion I64 -> D64 */
+      Iop_ReinterpI64asD64,
+
+      /* Conversion D64 -> I64 */
+      Iop_ReinterpD64asI64,
+
+      /* ------------------ 128-bit SIMD FP. ------------------ */
+
+      /* --- 32x4 vector FP --- */
+
+      /* ternary :: IRRoundingMode(I32) x V128 x V128 -> V128 */
+      Iop_Add32Fx4, Iop_Sub32Fx4, Iop_Mul32Fx4, Iop_Div32Fx4, 
+
+      /* binary */
+      Iop_Max32Fx4, Iop_Min32Fx4,
+      Iop_Add32Fx2, Iop_Sub32Fx2,
+      /* Note: For the following compares, the ppc and arm front-ends assume a
+         nan in a lane of either argument returns zero for that lane. */
+      Iop_CmpEQ32Fx4, Iop_CmpLT32Fx4, Iop_CmpLE32Fx4, Iop_CmpUN32Fx4,
+      Iop_CmpGT32Fx4, Iop_CmpGE32Fx4,
+
+      /* Pairwise Max and Min. See integer pairwise operations for details. */
+      Iop_PwMax32Fx4, Iop_PwMin32Fx4,
+
+      /* unary */
+      Iop_Abs32Fx4,
+      Iop_Neg32Fx4,
+
+      /* binary :: IRRoundingMode(I32) x V128 -> V128 */
+      Iop_Sqrt32Fx4,
+
+      /* Vector Reciprocal Estimate finds an approximate reciprocal of each
+         element in the operand vector, and places the results in the
+         destination vector.  */
+      Iop_RecipEst32Fx4,
+
+      /* Vector Reciprocal Step computes (2.0 - arg1 * arg2).
+         Note, that if one of the arguments is zero and another one is infinity
+         of arbitrary sign the result of the operation is 2.0. */
+      Iop_RecipStep32Fx4,
+
+      /* Vector Reciprocal Square Root Estimate finds an approximate reciprocal
+         square root of each element in the operand vector. */
+      Iop_RSqrtEst32Fx4,
+
+      /* Vector Reciprocal Square Root Step computes (3.0 - arg1 * arg2) / 2.0.
+         Note, that of one of the arguments is zero and another one is infiinty
+         of arbitrary sign the result of the operation is 1.5. */
+      Iop_RSqrtStep32Fx4,
+
+      /* --- Int to/from FP conversion --- */
+      /* Unlike the standard fp conversions, these irops take no
+         rounding mode argument. Instead the irop trailers _R{M,P,N,Z}
+         indicate the mode: {-inf, +inf, nearest, zero} respectively. */
+      Iop_I32UtoFx4,     Iop_I32StoFx4,       /* I32x4 -> F32x4       */
+      Iop_FtoI32Ux4_RZ,  Iop_FtoI32Sx4_RZ,    /* F32x4 -> I32x4       */
+      Iop_QFtoI32Ux4_RZ, Iop_QFtoI32Sx4_RZ,   /* F32x4 -> I32x4 (saturating) */
+      Iop_RoundF32x4_RM, Iop_RoundF32x4_RP,   /* round to fp integer  */
+      Iop_RoundF32x4_RN, Iop_RoundF32x4_RZ,   /* round to fp integer  */
+      /* Fixed32 format is floating-point number with fixed number of fraction
+         bits. The number of fraction bits is passed as a second argument of
+         type I8. */
+      Iop_F32ToFixed32Ux4_RZ, Iop_F32ToFixed32Sx4_RZ, /* fp -> fixed-point */
+      Iop_Fixed32UToF32x4_RN, Iop_Fixed32SToF32x4_RN, /* fixed-point -> fp */
+
+      /* --- Single to/from half conversion --- */
+      /* FIXME: what kind of rounding in F32x4 -> F16x4 case? */
+      Iop_F32toF16x4, Iop_F16toF32x4,         /* F32x4 <-> F16x4      */
+
+      /* -- Double to/from half conversion -- */
+      Iop_F64toF16x2, Iop_F16toF64x2,
+
+      /* --- 32x4 lowest-lane-only scalar FP --- */
+
+      /* In binary cases, upper 3/4 is copied from first operand.  In
+         unary cases, upper 3/4 is copied from the operand. */
+
+      /* binary */
+      Iop_Add32F0x4, Iop_Sub32F0x4, Iop_Mul32F0x4, Iop_Div32F0x4, 
+      Iop_Max32F0x4, Iop_Min32F0x4,
+      Iop_CmpEQ32F0x4, Iop_CmpLT32F0x4, Iop_CmpLE32F0x4, Iop_CmpUN32F0x4, 
+
+      /* unary */
+      Iop_RecipEst32F0x4, Iop_Sqrt32F0x4, Iop_RSqrtEst32F0x4,
+
+      /* --- 64x2 vector FP --- */
+
+      /* ternary :: IRRoundingMode(I32) x V128 x V128 -> V128 */
+      Iop_Add64Fx2, Iop_Sub64Fx2, Iop_Mul64Fx2, Iop_Div64Fx2, 
+
+      /* binary */
+      Iop_Max64Fx2, Iop_Min64Fx2,
+      Iop_CmpEQ64Fx2, Iop_CmpLT64Fx2, Iop_CmpLE64Fx2, Iop_CmpUN64Fx2, 
+
+      /* unary */
+      Iop_Abs64Fx2,
+      Iop_Neg64Fx2,
+
+      /* binary :: IRRoundingMode(I32) x V128 -> V128 */
+      Iop_Sqrt64Fx2,
+
+      /* see 32Fx4 variants for description */
+      Iop_RecipEst64Fx2,    // unary
+      Iop_RecipStep64Fx2,   // binary
+      Iop_RSqrtEst64Fx2,    // unary
+      Iop_RSqrtStep64Fx2,   // binary
+
+      /* --- 64x2 lowest-lane-only scalar FP --- */
+
+      /* In binary cases, upper half is copied from first operand.  In
+         unary cases, upper half is copied from the operand. */
+
+      /* binary */
+      Iop_Add64F0x2, Iop_Sub64F0x2, Iop_Mul64F0x2, Iop_Div64F0x2, 
+      Iop_Max64F0x2, Iop_Min64F0x2,
+      Iop_CmpEQ64F0x2, Iop_CmpLT64F0x2, Iop_CmpLE64F0x2, Iop_CmpUN64F0x2, 
+
+      /* unary */
+      Iop_Sqrt64F0x2,
+
+      /* --- pack / unpack --- */
+
+      /* 64 <-> 128 bit vector */
+      Iop_V128to64,     // :: V128 -> I64, low half
+      Iop_V128HIto64,   // :: V128 -> I64, high half
+      Iop_64HLtoV128,   // :: (I64,I64) -> V128
+
+      Iop_64UtoV128,
+      Iop_SetV128lo64,
+
+      /* Copies lower 64/32/16/8 bits, zeroes out the rest. */
+      Iop_ZeroHI64ofV128,    // :: V128 -> V128
+      Iop_ZeroHI96ofV128,    // :: V128 -> V128
+      Iop_ZeroHI112ofV128,   // :: V128 -> V128
+      Iop_ZeroHI120ofV128,   // :: V128 -> V128
+
+      /* 32 <-> 128 bit vector */
+      Iop_32UtoV128,
+      Iop_V128to32,     // :: V128 -> I32, lowest lane
+      Iop_SetV128lo32,  // :: (V128,I32) -> V128
+
+      /* ------------------ 128-bit SIMD Integer. ------------------ */
+
+      /* BITWISE OPS */
+      Iop_NotV128,
+      Iop_AndV128, Iop_OrV128, Iop_XorV128, 
+
+      /* VECTOR SHIFT (shift amt :: Ity_I8) */
+      Iop_ShlV128, Iop_ShrV128, Iop_SarV128,
+
+      /* MISC (vector integer cmp != 0) */
+      Iop_CmpNEZ8x16, Iop_CmpNEZ16x8, Iop_CmpNEZ32x4, Iop_CmpNEZ64x2,
+      Iop_CmpNEZ128x1,
+
+      /* ADDITION (normal / U->U sat / S->S sat) */
+      Iop_Add8x16,    Iop_Add16x8,    Iop_Add32x4,    Iop_Add64x2,   Iop_Add128x1,
+      Iop_QAdd8Ux16,  Iop_QAdd16Ux8,  Iop_QAdd32Ux4,  Iop_QAdd64Ux2,
+      Iop_QAdd8Sx16,  Iop_QAdd16Sx8,  Iop_QAdd32Sx4,  Iop_QAdd64Sx2,
+
+      /* ADDITION, ARM64 specific saturating variants. */
+      /* Unsigned widen left arg, signed widen right arg, add, saturate S->S.
+         This corresponds to SUQADD. */
+      Iop_QAddExtUSsatSS8x16, Iop_QAddExtUSsatSS16x8,
+      Iop_QAddExtUSsatSS32x4, Iop_QAddExtUSsatSS64x2,
+      /* Signed widen left arg, unsigned widen right arg, add, saturate U->U.
+         This corresponds to USQADD. */
+      Iop_QAddExtSUsatUU8x16, Iop_QAddExtSUsatUU16x8,
+      Iop_QAddExtSUsatUU32x4, Iop_QAddExtSUsatUU64x2,
+
+      /* SUBTRACTION (normal / unsigned sat / signed sat) */
+      Iop_Sub8x16,   Iop_Sub16x8,   Iop_Sub32x4,   Iop_Sub64x2,   Iop_Sub128x1,
+      Iop_QSub8Ux16, Iop_QSub16Ux8, Iop_QSub32Ux4, Iop_QSub64Ux2,
+      Iop_QSub8Sx16, Iop_QSub16Sx8, Iop_QSub32Sx4, Iop_QSub64Sx2,
+
+      /* MULTIPLICATION (normal / high half of signed/unsigned) */
+      Iop_Mul8x16,  Iop_Mul16x8,    Iop_Mul32x4,
+      Iop_MulHi8Ux16, Iop_MulHi16Ux8, Iop_MulHi32Ux4,
+      Iop_MulHi8Sx16, Iop_MulHi16Sx8, Iop_MulHi32Sx4,
+      /* (widening signed/unsigned of even lanes, with lowest lane=zero) */
+      Iop_MullEven8Ux16, Iop_MullEven16Ux8, Iop_MullEven32Ux4,
+      Iop_MullEven8Sx16, Iop_MullEven16Sx8, Iop_MullEven32Sx4,
+
+      /* Widening multiplies, all of the form (I64, I64) -> V128 */
+      Iop_Mull8Ux8, Iop_Mull8Sx8,
+      Iop_Mull16Ux4, Iop_Mull16Sx4,
+      Iop_Mull32Ux2, Iop_Mull32Sx2,
+
+      /* Signed doubling saturating widening multiplies, (I64, I64) -> V128 */
+      Iop_QDMull16Sx4, Iop_QDMull32Sx2,
+
+      /* Vector Saturating Doubling Multiply Returning High Half and
+         Vector Saturating Rounding Doubling Multiply Returning High Half.
+         These IROps multiply corresponding elements in two vectors, double
+         the results, and place the most significant half of the final results
+         in the destination vector.  The results are truncated or rounded.  If
+         any of the results overflow, they are saturated.  To be more precise,
+         for each lane, the computed result is: 
+           QDMulHi:  
+             hi-half( sign-extend(laneL) *q sign-extend(laneR) *q 2 )
+           QRDMulHi:
+             hi-half( sign-extend(laneL) *q sign-extend(laneR) *q 2
+                      +q (1 << (lane-width-in-bits - 1)) )
+      */
+      Iop_QDMulHi16Sx8,  Iop_QDMulHi32Sx4,  /* (V128, V128) -> V128 */
+      Iop_QRDMulHi16Sx8, Iop_QRDMulHi32Sx4, /* (V128, V128) -> V128 */
+
+      /* Polynomial multiplication treats its arguments as
+         coefficients of polynomials over {0, 1}. */
+      Iop_PolynomialMul8x16, /* (V128, V128) -> V128 */
+      Iop_PolynomialMull8x8, /*   (I64, I64) -> V128 */
+
+      /* Vector Polynomial multiplication add.   (V128, V128) -> V128
+
+       *** Below is the algorithm for the instructions. These Iops could
+           be emulated to get this functionality, but the emulation would
+           be long and messy.
+
+        Example for polynomial multiply add for vector of bytes
+        do i = 0 to 15
+            prod[i].bit[0:14] <- 0
+            srcA <- VR[argL].byte[i]
+            srcB <- VR[argR].byte[i]
+            do j = 0 to 7
+                do k = 0 to j
+                    gbit <- srcA.bit[k] & srcB.bit[j-k]
+                    prod[i].bit[j] <- prod[i].bit[j] ^ gbit
+                end
+            end
+
+            do j = 8 to 14
+                do k = j-7 to 7
+                     gbit <- (srcA.bit[k] & srcB.bit[j-k])
+                     prod[i].bit[j] <- prod[i].bit[j] ^ gbit
+                end
+            end
+        end
+
+        do i = 0 to 7
+            VR[dst].hword[i] <- 0b0 || (prod[2×i] ^ prod[2×i+1])
+        end
+      */
+      Iop_PolynomialMulAdd8x16, Iop_PolynomialMulAdd16x8,
+      Iop_PolynomialMulAdd32x4, Iop_PolynomialMulAdd64x2,
+
+      /* PAIRWISE operations */
+      /* Iop_PwFoo16x4( [a,b,c,d], [e,f,g,h] ) =
+            [Foo16(a,b), Foo16(c,d), Foo16(e,f), Foo16(g,h)] */
+      Iop_PwAdd8x16, Iop_PwAdd16x8, Iop_PwAdd32x4,
+      Iop_PwAdd32Fx2,
+      /* Longening variant is unary. The resulting vector contains two times
+         less elements than operand, but they are two times wider.
+         Example:
+            Iop_PwAddL16Ux4( [a,b,c,d] ) = [a+b,c+d]
+               where a+b and c+d are unsigned 32-bit values. */
+      Iop_PwAddL8Ux16, Iop_PwAddL16Ux8, Iop_PwAddL32Ux4, Iop_PwAddL64Ux2,
+      Iop_PwAddL8Sx16, Iop_PwAddL16Sx8, Iop_PwAddL32Sx4,
+
+      /* Other unary pairwise ops */
+
+      /* Vector bit matrix transpose.  (V128) -> V128 */
+      /* For each doubleword element of the source vector, an 8-bit x 8-bit
+       * matrix transpose is performed. */
+      Iop_PwBitMtxXpose64x2,
+
+      /* ABSOLUTE VALUE */
+      Iop_Abs8x16, Iop_Abs16x8, Iop_Abs32x4, Iop_Abs64x2,
+
+      /* AVERAGING: note: (arg1 + arg2 + 1) >>u 1 */
+      Iop_Avg8Ux16, Iop_Avg16Ux8, Iop_Avg32Ux4, Iop_Avg64Ux2,
+      Iop_Avg8Sx16, Iop_Avg16Sx8, Iop_Avg32Sx4, Iop_Avg64Sx2,
+
+      /* MIN/MAX */
+      Iop_Max8Sx16, Iop_Max16Sx8, Iop_Max32Sx4, Iop_Max64Sx2,
+      Iop_Max8Ux16, Iop_Max16Ux8, Iop_Max32Ux4, Iop_Max64Ux2,
+      Iop_Min8Sx16, Iop_Min16Sx8, Iop_Min32Sx4, Iop_Min64Sx2,
+      Iop_Min8Ux16, Iop_Min16Ux8, Iop_Min32Ux4, Iop_Min64Ux2,
+
+      /* COMPARISON */
+      Iop_CmpEQ8x16,  Iop_CmpEQ16x8,  Iop_CmpEQ32x4,  Iop_CmpEQ64x2,
+      Iop_CmpGT8Sx16, Iop_CmpGT16Sx8, Iop_CmpGT32Sx4, Iop_CmpGT64Sx2,
+      Iop_CmpGT8Ux16, Iop_CmpGT16Ux8, Iop_CmpGT32Ux4, Iop_CmpGT64Ux2,
+
+      /* COUNT ones / leading zeroes / leading sign bits (not including topmost
+         bit) */
+      Iop_Cnt8x16,
+      Iop_Clz8x16, Iop_Clz16x8, Iop_Clz32x4,
+      Iop_Cls8x16, Iop_Cls16x8, Iop_Cls32x4,
+
+      /* VECTOR x SCALAR SHIFT (shift amt :: Ity_I8) */
+      Iop_ShlN8x16, Iop_ShlN16x8, Iop_ShlN32x4, Iop_ShlN64x2,
+      Iop_ShrN8x16, Iop_ShrN16x8, Iop_ShrN32x4, Iop_ShrN64x2,
+      Iop_SarN8x16, Iop_SarN16x8, Iop_SarN32x4, Iop_SarN64x2,
+
+      /* VECTOR x VECTOR SHIFT / ROTATE */
+      /* FIXME: I'm pretty sure the ARM32 front/back ends interpret these
+         differently from all other targets.  The intention is that
+         the shift amount (2nd arg) is interpreted as unsigned and
+         only the lowest log2(lane-bits) bits are relevant.  But the
+         ARM32 versions treat the shift amount as an 8 bit signed
+         number.  The ARM32 uses should be replaced by the relevant
+         vector x vector bidirectional shifts instead. */
+      Iop_Shl8x16, Iop_Shl16x8, Iop_Shl32x4, Iop_Shl64x2,
+      Iop_Shr8x16, Iop_Shr16x8, Iop_Shr32x4, Iop_Shr64x2,
+      Iop_Sar8x16, Iop_Sar16x8, Iop_Sar32x4, Iop_Sar64x2,
+      Iop_Sal8x16, Iop_Sal16x8, Iop_Sal32x4, Iop_Sal64x2,
+      Iop_Rol8x16, Iop_Rol16x8, Iop_Rol32x4, Iop_Rol64x2,
+
+      /* VECTOR x VECTOR SATURATING SHIFT */
+      Iop_QShl8x16, Iop_QShl16x8, Iop_QShl32x4, Iop_QShl64x2,
+      Iop_QSal8x16, Iop_QSal16x8, Iop_QSal32x4, Iop_QSal64x2,
+      /* VECTOR x INTEGER SATURATING SHIFT */
+      Iop_QShlNsatSU8x16, Iop_QShlNsatSU16x8,
+      Iop_QShlNsatSU32x4, Iop_QShlNsatSU64x2,
+      Iop_QShlNsatUU8x16, Iop_QShlNsatUU16x8,
+      Iop_QShlNsatUU32x4, Iop_QShlNsatUU64x2,
+      Iop_QShlNsatSS8x16, Iop_QShlNsatSS16x8,
+      Iop_QShlNsatSS32x4, Iop_QShlNsatSS64x2,
+
+      /* VECTOR x VECTOR BIDIRECTIONAL SATURATING (& MAYBE ROUNDING) SHIFT */
+      /* All of type (V128, V128) -> V256. */
+      /* The least significant 8 bits of each lane of the second
+         operand are used as the shift amount, and interpreted signedly.
+         Positive values mean a shift left, negative a shift right.  The
+         result is signedly or unsignedly saturated.  There are also
+         rounding variants, which add 2^(shift_amount-1) to the value before
+         shifting, but only in the shift-right case.  Vacated positions
+         are filled with zeroes.  IOW, it's either SHR or SHL, but not SAR.
+
+         These operations return 129 bits: one bit ("Q") indicating whether
+         saturation occurred, and the shift result.  The result type is V256,
+         of which the lower V128 is the shift result, and Q occupies the
+         least significant bit of the upper V128.  All other bits of the
+         upper V128 are zero. */
+      // Unsigned saturation, no rounding
+      Iop_QandUQsh8x16, Iop_QandUQsh16x8,
+      Iop_QandUQsh32x4, Iop_QandUQsh64x2,
+      // Signed saturation, no rounding
+      Iop_QandSQsh8x16, Iop_QandSQsh16x8,
+      Iop_QandSQsh32x4, Iop_QandSQsh64x2,
+
+      // Unsigned saturation, rounding
+      Iop_QandUQRsh8x16, Iop_QandUQRsh16x8,
+      Iop_QandUQRsh32x4, Iop_QandUQRsh64x2,
+      // Signed saturation, rounding
+      Iop_QandSQRsh8x16, Iop_QandSQRsh16x8,
+      Iop_QandSQRsh32x4, Iop_QandSQRsh64x2,
+
+      /* VECTOR x VECTOR BIDIRECTIONAL (& MAYBE ROUNDING) SHIFT */
+      /* All of type (V128, V128) -> V128 */
+      /* The least significant 8 bits of each lane of the second
+         operand are used as the shift amount, and interpreted signedly.
+         Positive values mean a shift left, negative a shift right.
+         There are also rounding variants, which add 2^(shift_amount-1)
+         to the value before shifting, but only in the shift-right case.
+
+         For left shifts, the vacated places are filled with zeroes.
+         For right shifts, the vacated places are filled with zeroes
+         for the U variants and sign bits for the S variants. */
+      // Signed and unsigned, non-rounding
+      Iop_Sh8Sx16, Iop_Sh16Sx8, Iop_Sh32Sx4, Iop_Sh64Sx2,
+      Iop_Sh8Ux16, Iop_Sh16Ux8, Iop_Sh32Ux4, Iop_Sh64Ux2,
+
+      // Signed and unsigned, rounding
+      Iop_Rsh8Sx16, Iop_Rsh16Sx8, Iop_Rsh32Sx4, Iop_Rsh64Sx2,
+      Iop_Rsh8Ux16, Iop_Rsh16Ux8, Iop_Rsh32Ux4, Iop_Rsh64Ux2,
+
+      /* The least significant 8 bits of each lane of the second
+         operand are used as the shift amount, and interpreted signedly.
+         Positive values mean a shift left, negative a shift right.  The
+         result is signedly or unsignedly saturated.  There are also
+         rounding variants, which add 2^(shift_amount-1) to the value before
+         shifting, but only in the shift-right case.  Vacated positions
+         are filled with zeroes.  IOW, it's either SHR or SHL, but not SAR.
+      */
+
+      /* VECTOR x SCALAR SATURATING (& MAYBE ROUNDING) NARROWING SHIFT RIGHT */
+      /* All of type (V128, I8) -> V128 */
+      /* The first argument is shifted right, then narrowed to half the width
+         by saturating it.  The second argument is a scalar shift amount that
+         applies to all lanes, and must be a value in the range 1 to lane_width.
+         The shift may be done signedly (Sar variants) or unsignedly (Shr
+         variants).  The saturation is done according to the two signedness
+         indicators at the end of the name.  For example 64Sto32U means a
+         signed 64 bit value is saturated into an unsigned 32 bit value.
+         Additionally, the QRS variants do rounding, that is, they add the
+         value (1 << (shift_amount-1)) to each source lane before shifting.
+
+         These operations return 65 bits: one bit ("Q") indicating whether
+         saturation occurred, and the shift result.  The result type is V128,
+         of which the lower half is the shift result, and Q occupies the
+         least significant bit of the upper half.  All other bits of the
+         upper half are zero. */
+      // No rounding, sat U->U
+      Iop_QandQShrNnarrow16Uto8Ux8,
+      Iop_QandQShrNnarrow32Uto16Ux4, Iop_QandQShrNnarrow64Uto32Ux2,
+      // No rounding, sat S->S
+      Iop_QandQSarNnarrow16Sto8Sx8,
+      Iop_QandQSarNnarrow32Sto16Sx4, Iop_QandQSarNnarrow64Sto32Sx2,
+      // No rounding, sat S->U
+      Iop_QandQSarNnarrow16Sto8Ux8,
+      Iop_QandQSarNnarrow32Sto16Ux4, Iop_QandQSarNnarrow64Sto32Ux2,
+
+      // Rounding, sat U->U
+      Iop_QandQRShrNnarrow16Uto8Ux8,
+      Iop_QandQRShrNnarrow32Uto16Ux4, Iop_QandQRShrNnarrow64Uto32Ux2,
+      // Rounding, sat S->S
+      Iop_QandQRSarNnarrow16Sto8Sx8,
+      Iop_QandQRSarNnarrow32Sto16Sx4, Iop_QandQRSarNnarrow64Sto32Sx2,
+      // Rounding, sat S->U
+      Iop_QandQRSarNnarrow16Sto8Ux8,
+      Iop_QandQRSarNnarrow32Sto16Ux4, Iop_QandQRSarNnarrow64Sto32Ux2,
+
+      /* NARROWING (binary) 
+         -- narrow 2xV128 into 1xV128, hi half from left arg */
+      /* See comments above w.r.t. U vs S issues in saturated narrowing. */
+      Iop_QNarrowBin16Sto8Ux16, Iop_QNarrowBin32Sto16Ux8,
+      Iop_QNarrowBin16Sto8Sx16, Iop_QNarrowBin32Sto16Sx8,
+      Iop_QNarrowBin16Uto8Ux16, Iop_QNarrowBin32Uto16Ux8,
+      Iop_NarrowBin16to8x16, Iop_NarrowBin32to16x8,
+      Iop_QNarrowBin64Sto32Sx4, Iop_QNarrowBin64Uto32Ux4,
+      Iop_NarrowBin64to32x4,
+
+      /* NARROWING (unary) -- narrow V128 into I64 */
+      Iop_NarrowUn16to8x8, Iop_NarrowUn32to16x4, Iop_NarrowUn64to32x2,
+      /* Saturating narrowing from signed source to signed/unsigned
+         destination */
+      Iop_QNarrowUn16Sto8Sx8, Iop_QNarrowUn32Sto16Sx4, Iop_QNarrowUn64Sto32Sx2,
+      Iop_QNarrowUn16Sto8Ux8, Iop_QNarrowUn32Sto16Ux4, Iop_QNarrowUn64Sto32Ux2,
+      /* Saturating narrowing from unsigned source to unsigned destination */
+      Iop_QNarrowUn16Uto8Ux8, Iop_QNarrowUn32Uto16Ux4, Iop_QNarrowUn64Uto32Ux2,
+
+      /* WIDENING -- sign or zero extend each element of the argument
+         vector to the twice original size.  The resulting vector consists of
+         the same number of elements but each element and the vector itself
+         are twice as wide.
+         All operations are I64->V128.
+         Example
+            Iop_Widen32Sto64x2( [a, b] ) = [c, d]
+               where c = Iop_32Sto64(a) and d = Iop_32Sto64(b) */
+      Iop_Widen8Uto16x8, Iop_Widen16Uto32x4, Iop_Widen32Uto64x2,
+      Iop_Widen8Sto16x8, Iop_Widen16Sto32x4, Iop_Widen32Sto64x2,
+
+      /* INTERLEAVING */
+      /* Interleave lanes from low or high halves of
+         operands.  Most-significant result lane is from the left
+         arg. */
+      Iop_InterleaveHI8x16, Iop_InterleaveHI16x8,
+      Iop_InterleaveHI32x4, Iop_InterleaveHI64x2,
+      Iop_InterleaveLO8x16, Iop_InterleaveLO16x8,
+      Iop_InterleaveLO32x4, Iop_InterleaveLO64x2,
+      /* Interleave odd/even lanes of operands.  Most-significant result lane
+         is from the left arg. */
+      Iop_InterleaveOddLanes8x16, Iop_InterleaveEvenLanes8x16,
+      Iop_InterleaveOddLanes16x8, Iop_InterleaveEvenLanes16x8,
+      Iop_InterleaveOddLanes32x4, Iop_InterleaveEvenLanes32x4,
+
+      /* CONCATENATION -- build a new value by concatenating either
+         the even or odd lanes of both operands.  Note that
+         Cat{Odd,Even}Lanes64x2 are identical to Interleave{HI,LO}64x2
+         and so are omitted. */
+      Iop_CatOddLanes8x16, Iop_CatOddLanes16x8, Iop_CatOddLanes32x4,
+      Iop_CatEvenLanes8x16, Iop_CatEvenLanes16x8, Iop_CatEvenLanes32x4,
+
+      /* GET elements of VECTOR
+         GET is binop (V128, I8) -> I<elem_size>
+         SET is triop (V128, I8, I<elem_size>) -> V128 */
+      /* Note: the arm back-end handles only constant second argument. */
+      Iop_GetElem8x16, Iop_GetElem16x8, Iop_GetElem32x4, Iop_GetElem64x2,
+      Iop_SetElem8x16, Iop_SetElem16x8, Iop_SetElem32x4, Iop_SetElem64x2,
+
+      /* DUPLICATING -- copy value to all lanes */
+      Iop_Dup8x16,   Iop_Dup16x8,   Iop_Dup32x4,
+
+      /* SLICE -- produces the lowest 128 bits of (arg1:arg2) >> (8 * arg3).
+         arg3 is a shift amount in bytes and may be between 0 and 16
+         inclusive.  When 0, the result is arg2; when 16, the result is arg1.
+         Not all back ends handle all values.  The arm64 back
+         end handles only immediate arg3 values. */
+      Iop_SliceV128,  // (V128, V128, I8) -> V128
+
+      /* REVERSE the order of chunks in vector lanes.  Chunks must be
+         smaller than the vector lanes (obviously) and so may be 8-,
+         16- and 32-bit in size.  See definitions of 64-bit SIMD
+         versions above for examples. */
+      Iop_Reverse8sIn16_x8,
+      Iop_Reverse8sIn32_x4, Iop_Reverse16sIn32_x4,
+      Iop_Reverse8sIn64_x2, Iop_Reverse16sIn64_x2, Iop_Reverse32sIn64_x2,
+      Iop_Reverse1sIn8_x16, /* Reverse bits in each byte lane. */
+
+      /* PERMUTING -- copy src bytes to dst,
+         as indexed by control vector bytes:
+            for i in 0 .. 15 . result[i] = argL[ argR[i] ] 
+         argR[i] values may only be in the range 0 .. 15, else behaviour
+         is undefined. */
+      Iop_Perm8x16,
+      Iop_Perm32x4, /* ditto, except argR values are restricted to 0 .. 3 */
+
+      /* same, but Triop (argL consists of two 128-bit parts) */
+      /* correct range for argR values is 0..31 */
+      /* (V128, V128, V128) -> V128 */
+      /* (ArgL_first, ArgL_second, ArgR) -> result */
+      Iop_Perm8x16x2,
+
+      /* MISC CONVERSION -- get high bits of each byte lane, a la
+         x86/amd64 pmovmskb */
+      Iop_GetMSBs8x16, /* V128 -> I16 */
+
+      /* Vector Reciprocal Estimate and Vector Reciprocal Square Root Estimate
+         See floating-point equivalents for details. */
+      Iop_RecipEst32Ux4, Iop_RSqrtEst32Ux4,
+
+      /* 128-bit multipy by 10 instruction, result is lower 128-bits */
+      Iop_MulI128by10,
+
+      /* 128-bit multipy by 10 instruction, result is carry out from the MSB */
+      Iop_MulI128by10Carry,
+
+      /* 128-bit multipy by 10 instruction, result is lower 128-bits of the
+       * source times 10 plus the carry in
+       */
+      Iop_MulI128by10E,
+
+      /* 128-bit multipy by 10 instruction, result is carry out from the MSB
+       * of the source times 10 plus the carry in
+       */
+      Iop_MulI128by10ECarry,
+
+      /* ------------------ 256-bit SIMD Integer. ------------------ */
+
+      /* Pack/unpack */
+      Iop_V256to64_0,  // V256 -> I64, extract least significant lane
+      Iop_V256to64_1,
+      Iop_V256to64_2,
+      Iop_V256to64_3,  // V256 -> I64, extract most significant lane
+
+      Iop_64x4toV256,  // (I64,I64,I64,I64)->V256
+                       // first arg is most significant lane
+
+      Iop_V256toV128_0, // V256 -> V128, less significant lane
+      Iop_V256toV128_1, // V256 -> V128, more significant lane
+      Iop_V128HLtoV256, // (V128,V128)->V256, first arg is most signif
+
+      Iop_AndV256,
+      Iop_OrV256,
+      Iop_XorV256,
+      Iop_NotV256,
+
+      /* MISC (vector integer cmp != 0) */
+      Iop_CmpNEZ8x32, Iop_CmpNEZ16x16, Iop_CmpNEZ32x8, Iop_CmpNEZ64x4,
+
+      Iop_Add8x32,    Iop_Add16x16,    Iop_Add32x8,    Iop_Add64x4,
+      Iop_Sub8x32,    Iop_Sub16x16,    Iop_Sub32x8,    Iop_Sub64x4,
+
+      Iop_CmpEQ8x32,  Iop_CmpEQ16x16,  Iop_CmpEQ32x8,  Iop_CmpEQ64x4,
+      Iop_CmpGT8Sx32, Iop_CmpGT16Sx16, Iop_CmpGT32Sx8, Iop_CmpGT64Sx4,
+
+      Iop_ShlN16x16, Iop_ShlN32x8, Iop_ShlN64x4,
+      Iop_ShrN16x16, Iop_ShrN32x8, Iop_ShrN64x4,
+      Iop_SarN16x16, Iop_SarN32x8,
+
+      Iop_Max8Sx32, Iop_Max16Sx16, Iop_Max32Sx8,
+      Iop_Max8Ux32, Iop_Max16Ux16, Iop_Max32Ux8,
+      Iop_Min8Sx32, Iop_Min16Sx16, Iop_Min32Sx8,
+      Iop_Min8Ux32, Iop_Min16Ux16, Iop_Min32Ux8,
+
+      Iop_Mul16x16, Iop_Mul32x8,
+      Iop_MulHi16Ux16, Iop_MulHi16Sx16,
+
+      Iop_QAdd8Ux32, Iop_QAdd16Ux16,
+      Iop_QAdd8Sx32, Iop_QAdd16Sx16,
+      Iop_QSub8Ux32, Iop_QSub16Ux16,
+      Iop_QSub8Sx32, Iop_QSub16Sx16,
+
+      Iop_Avg8Ux32, Iop_Avg16Ux16,
+
+      Iop_Perm32x8,
+
+      /* (V128, V128) -> V128 */
+      Iop_CipherV128, Iop_CipherLV128, Iop_CipherSV128,
+      Iop_NCipherV128, Iop_NCipherLV128,
+
+      /* Hash instructions, Federal Information Processing Standards
+       * Publication 180-3 Secure Hash Standard. */
+      /* (V128, I8) -> V128; The I8 input arg is (ST | SIX), where ST and
+       * SIX are fields from the insn. See ISA 2.07 description of
+       * vshasigmad and vshasigmaw insns.*/
+      Iop_SHA512, Iop_SHA256,
+
+      /* ------------------ 256-bit SIMD FP. ------------------ */
+
+      /* ternary :: IRRoundingMode(I32) x V256 x V256 -> V256 */
+      Iop_Add64Fx4, Iop_Sub64Fx4, Iop_Mul64Fx4, Iop_Div64Fx4,
+      Iop_Add32Fx8, Iop_Sub32Fx8, Iop_Mul32Fx8, Iop_Div32Fx8,
+
+      Iop_Sqrt32Fx8,
+      Iop_Sqrt64Fx4,
+      Iop_RSqrtEst32Fx8,
+      Iop_RecipEst32Fx8,
+
+      Iop_Max32Fx8, Iop_Min32Fx8,
+      Iop_Max64Fx4, Iop_Min64Fx4,
+      Iop_LAST      /* must be the last enumerator */
+   }
+   IROp;
+
+/* Pretty-print an op. */
+extern void ppIROp ( IROp );
+
+/* For a given operand return the types of its arguments and its result. */
+extern void typeOfPrimop ( IROp op,
+                           /*OUTs*/ IRType* t_dst, IRType* t_arg1,
+                           IRType* t_arg2, IRType* t_arg3, IRType* t_arg4 );
+
+/* Encoding of IEEE754-specified rounding modes.
+   Note, various front and back ends rely on the actual numerical
+   values of these, so do not change them. */
+typedef
+   enum { 
+      Irrm_NEAREST              = 0,  // Round to nearest, ties to even
+      Irrm_NegINF               = 1,  // Round to negative infinity
+      Irrm_PosINF               = 2,  // Round to positive infinity
+      Irrm_ZERO                 = 3,  // Round toward zero
+      Irrm_NEAREST_TIE_AWAY_0   = 4,  // Round to nearest, ties away from 0
+      Irrm_PREPARE_SHORTER      = 5,  // Round to prepare for shorter 
+                                      // precision
+      Irrm_AWAY_FROM_ZERO       = 6,  // Round to away from 0
+      Irrm_NEAREST_TIE_TOWARD_0 = 7,  // Round to nearest, ties towards 0
+      Irrm_INVALID              = 8   // Invalid mode
+   }
+   IRRoundingMode;
+
+/* Binary floating point comparison result values.
+   This is also derived from what IA32 does. */
+typedef
+   enum {
+      Ircr_UN = 0x45,
+      Ircr_LT = 0x01,
+      Ircr_GT = 0x00,
+      Ircr_EQ = 0x40
+   }
+   IRCmpFResult;
+
+typedef IRCmpFResult IRCmpF32Result;
+typedef IRCmpFResult IRCmpF64Result;
+typedef IRCmpFResult IRCmpF128Result;
+
+/* Decimal floating point result values. */
+typedef IRCmpFResult IRCmpDResult;
+typedef IRCmpDResult IRCmpD64Result;
+typedef IRCmpDResult IRCmpD128Result;
+
+/* ------------------ Expressions ------------------ */
+
+typedef struct _IRQop   IRQop;   /* forward declaration */
+typedef struct _IRTriop IRTriop; /* forward declaration */
+
+
+/* The different kinds of expressions.  Their meaning is explained below
+   in the comments for IRExpr. */
+typedef
+   enum { 
+      Iex_Binder=0x1900,
+      Iex_Get,
+      Iex_GetI,
+      Iex_RdTmp,
+      Iex_Qop,
+      Iex_Triop,
+      Iex_Binop,
+      Iex_Unop,
+      Iex_Load,
+      Iex_Const,
+      Iex_ITE,
+      Iex_CCall,
+      Iex_VECRET,
+      Iex_GSPTR
+   }
+   IRExprTag;
+
+/* An expression.  Stored as a tagged union.  'tag' indicates what kind
+   of expression this is.  'Iex' is the union that holds the fields.  If
+   an IRExpr 'e' has e.tag equal to Iex_Load, then it's a load
+   expression, and the fields can be accessed with
+   'e.Iex.Load.<fieldname>'.
+
+   For each kind of expression, we show what it looks like when
+   pretty-printed with ppIRExpr().
+*/
+typedef
+   struct _IRExpr
+   IRExpr;
+
+struct _IRExpr {
+   IRExprTag tag;
+   union {
+      /* Used only in pattern matching within Vex.  Should not be seen
+         outside of Vex. */
+      struct {
+         Int binder;
+      } Binder;
+
+      /* Read a guest register, at a fixed offset in the guest state.
+         ppIRExpr output: GET:<ty>(<offset>), eg. GET:I32(0)
+      */
+      struct {
+         Int    offset;    /* Offset into the guest state */
+         IRType ty;        /* Type of the value being read */
+      } Get;
+
+      /* Read a guest register at a non-fixed offset in the guest
+         state.  This allows circular indexing into parts of the guest
+         state, which is essential for modelling situations where the
+         identity of guest registers is not known until run time.  One
+         example is the x87 FP register stack.
+
+         The part of the guest state to be treated as a circular array
+         is described in the IRRegArray 'descr' field.  It holds the
+         offset of the first element in the array, the type of each
+         element, and the number of elements.
+
+         The array index is indicated rather indirectly, in a way
+         which makes optimisation easy: as the sum of variable part
+         (the 'ix' field) and a constant offset (the 'bias' field).
+
+         Since the indexing is circular, the actual array index to use
+         is computed as (ix + bias) % num-of-elems-in-the-array.
+
+         Here's an example.  The description
+
+            (96:8xF64)[t39,-7]
+
+         describes an array of 8 F64-typed values, the
+         guest-state-offset of the first being 96.  This array is
+         being indexed at (t39 - 7) % 8.
+
+         It is important to get the array size/type exactly correct
+         since IR optimisation looks closely at such info in order to
+         establish aliasing/non-aliasing between seperate GetI and
+         PutI events, which is used to establish when they can be
+         reordered, etc.  Putting incorrect info in will lead to
+         obscure IR optimisation bugs.
+
+            ppIRExpr output: GETI<descr>[<ix>,<bias]
+                         eg. GETI(128:8xI8)[t1,0]
+      */
+      struct {
+         IRRegArray* descr; /* Part of guest state treated as circular */
+         IRExpr*     ix;    /* Variable part of index into array */
+         Int         bias;  /* Constant offset part of index into array */
+      } GetI;
+
+      /* The value held by a temporary.
+         ppIRExpr output: t<tmp>, eg. t1
+      */
+      struct {
+         IRTemp tmp;       /* The temporary number */
+      } RdTmp;
+
+      /* A quaternary operation.
+         ppIRExpr output: <op>(<arg1>, <arg2>, <arg3>, <arg4>),
+                      eg. MAddF64r32(t1, t2, t3, t4)
+      */
+      struct {
+        IRQop* details;
+      } Qop;
+
+      /* A ternary operation.
+         ppIRExpr output: <op>(<arg1>, <arg2>, <arg3>),
+                      eg. MulF64(1, 2.0, 3.0)
+      */
+      struct {
+        IRTriop* details;
+      } Triop;
+
+      /* A binary operation.
+         ppIRExpr output: <op>(<arg1>, <arg2>), eg. Add32(t1,t2)
+      */
+      struct {
+         IROp op;          /* op-code   */
+         IRExpr* arg1;     /* operand 1 */
+         IRExpr* arg2;     /* operand 2 */
+      } Binop;
+
+      /* A unary operation.
+         ppIRExpr output: <op>(<arg>), eg. Neg8(t1)
+      */
+      struct {
+         IROp    op;       /* op-code */
+         IRExpr* arg;      /* operand */
+      } Unop;
+
+      /* A load from memory -- a normal load, not a load-linked.
+         Load-Linkeds (and Store-Conditionals) are instead represented
+         by IRStmt.LLSC since Load-Linkeds have side effects and so
+         are not semantically valid IRExpr's.
+         ppIRExpr output: LD<end>:<ty>(<addr>), eg. LDle:I32(t1)
+      */
+      struct {
+         IREndness end;    /* Endian-ness of the load */
+         IRType    ty;     /* Type of the loaded value */
+         IRExpr*   addr;   /* Address being loaded from */
+      } Load;
+
+      /* A constant-valued expression.
+         ppIRExpr output: <con>, eg. 0x4:I32
+      */
+      struct {
+         IRConst* con;     /* The constant itself */
+      } Const;
+
+      /* A call to a pure (no side-effects) helper C function.
+
+         With the 'cee' field, 'name' is the function's name.  It is
+         only used for pretty-printing purposes.  The address to call
+         (host address, of course) is stored in the 'addr' field
+         inside 'cee'.
+
+         The 'args' field is a NULL-terminated array of arguments.
+         The stated return IRType, and the implied argument types,
+         must match that of the function being called well enough so
+         that the back end can actually generate correct code for the
+         call.
+
+         The called function **must** satisfy the following:
+
+         * no side effects -- must be a pure function, the result of
+           which depends only on the passed parameters.
+
+         * it may not look at, nor modify, any of the guest state
+           since that would hide guest state transitions from
+           instrumenters
+
+         * it may not access guest memory, since that would hide
+           guest memory transactions from the instrumenters
+
+         * it must not assume that arguments are being evaluated in a
+           particular order. The oder of evaluation is unspecified.
+
+         This is restrictive, but makes the semantics clean, and does
+         not interfere with IR optimisation.
+
+         If you want to call a helper which can mess with guest state
+         and/or memory, instead use Ist_Dirty.  This is a lot more
+         flexible, but you have to give a bunch of details about what
+         the helper does (and you better be telling the truth,
+         otherwise any derived instrumentation will be wrong).  Also
+         Ist_Dirty inhibits various IR optimisations and so can cause
+         quite poor code to be generated.  Try to avoid it.
+
+         In principle it would be allowable to have the arg vector
+         contain an IRExpr_VECRET(), although not IRExpr_GSPTR(). However,
+         at the moment there is no requirement for clean helper calls to
+         be able to return V128 or V256 values.  Hence this is not allowed.
+
+         ppIRExpr output: <cee>(<args>):<retty>
+                      eg. foo{0x80489304}(t1, t2):I32
+      */
+      struct {
+         IRCallee* cee;    /* Function to call. */
+         IRType    retty;  /* Type of return value. */
+         IRExpr**  args;   /* Vector of argument expressions. */
+      }  CCall;
+
+      /* A ternary if-then-else operator.  It returns iftrue if cond is
+         nonzero, iffalse otherwise.  Note that it is STRICT, ie. both
+         iftrue and iffalse are evaluated in all cases.
+
+         ppIRExpr output: ITE(<cond>,<iftrue>,<iffalse>),
+                         eg. ITE(t6,t7,t8)
+      */
+      struct {
+         IRExpr* cond;     /* Condition */
+         IRExpr* iftrue;   /* True expression */
+         IRExpr* iffalse;  /* False expression */
+      } ITE;
+   } Iex;
+};
+
+/* Expression auxiliaries: a ternary expression. */
+struct _IRTriop {
+   IROp op;          /* op-code   */
+   IRExpr* arg1;     /* operand 1 */
+   IRExpr* arg2;     /* operand 2 */
+   IRExpr* arg3;     /* operand 3 */
+};
+
+/* Expression auxiliaries: a quarternary expression. */
+struct _IRQop {
+   IROp op;          /* op-code   */
+   IRExpr* arg1;     /* operand 1 */
+   IRExpr* arg2;     /* operand 2 */
+   IRExpr* arg3;     /* operand 3 */
+   IRExpr* arg4;     /* operand 4 */
+};
+
+
+/* Two special kinds of IRExpr, which can ONLY be used in
+   argument lists for dirty helper calls (IRDirty.args) and in NO
+   OTHER PLACES.  And then only in very limited ways.  */
+
+/* Denotes an argument which (in the helper) takes a pointer to a
+   (naturally aligned) V128 or V256, into which the helper is expected
+   to write its result.  Use of IRExpr_VECRET() is strictly
+   controlled.  If the helper returns a V128 or V256 value then
+   IRExpr_VECRET() must appear exactly once in the arg list, although
+   it can appear anywhere, and the helper must have a C 'void' return
+   type.  If the helper returns any other type, IRExpr_VECRET() may
+   not appear in the argument list. */
+
+/* Denotes an void* argument which is passed to the helper, which at
+   run time will point to the thread's guest state area.  This can
+   only appear at most once in an argument list, and it may not appear
+   at all in argument lists for clean helper calls. */
+
+static inline Bool is_IRExpr_VECRET_or_GSPTR ( const IRExpr* e ) {
+   return e->tag == Iex_VECRET || e->tag == Iex_GSPTR;
+}
+
+
+/* Expression constructors. */
+extern IRExpr* IRExpr_Binder ( Int binder );
+extern IRExpr* IRExpr_Get    ( Int off, IRType ty );
+extern IRExpr* IRExpr_GetI   ( IRRegArray* descr, IRExpr* ix, Int bias );
+extern IRExpr* IRExpr_RdTmp  ( IRTemp tmp );
+extern IRExpr* IRExpr_Qop    ( IROp op, IRExpr* arg1, IRExpr* arg2, 
+                                        IRExpr* arg3, IRExpr* arg4 );
+extern IRExpr* IRExpr_Triop  ( IROp op, IRExpr* arg1, 
+                                        IRExpr* arg2, IRExpr* arg3 );
+extern IRExpr* IRExpr_Binop  ( IROp op, IRExpr* arg1, IRExpr* arg2 );
+extern IRExpr* IRExpr_Unop   ( IROp op, IRExpr* arg );
+extern IRExpr* IRExpr_Load   ( IREndness end, IRType ty, IRExpr* addr );
+extern IRExpr* IRExpr_Const  ( IRConst* con );
+extern IRExpr* IRExpr_CCall  ( IRCallee* cee, IRType retty, IRExpr** args );
+extern IRExpr* IRExpr_ITE    ( IRExpr* cond, IRExpr* iftrue, IRExpr* iffalse );
+extern IRExpr* IRExpr_VECRET ( void );
+extern IRExpr* IRExpr_GSPTR  ( void );
+
+/* Deep-copy an IRExpr. */
+extern IRExpr* deepCopyIRExpr ( const IRExpr* );
+
+/* Pretty-print an IRExpr. */
+extern void ppIRExpr ( const IRExpr* );
+
+/* NULL-terminated IRExpr vector constructors, suitable for
+   use as arg lists in clean/dirty helper calls. */
+extern IRExpr** mkIRExprVec_0 ( void );
+extern IRExpr** mkIRExprVec_1 ( IRExpr* );
+extern IRExpr** mkIRExprVec_2 ( IRExpr*, IRExpr* );
+extern IRExpr** mkIRExprVec_3 ( IRExpr*, IRExpr*, IRExpr* );
+extern IRExpr** mkIRExprVec_4 ( IRExpr*, IRExpr*, IRExpr*, IRExpr* );
+extern IRExpr** mkIRExprVec_5 ( IRExpr*, IRExpr*, IRExpr*, IRExpr*,
+                                IRExpr* );
+extern IRExpr** mkIRExprVec_6 ( IRExpr*, IRExpr*, IRExpr*, IRExpr*,
+                                IRExpr*, IRExpr* );
+extern IRExpr** mkIRExprVec_7 ( IRExpr*, IRExpr*, IRExpr*, IRExpr*,
+                                IRExpr*, IRExpr*, IRExpr* );
+extern IRExpr** mkIRExprVec_8 ( IRExpr*, IRExpr*, IRExpr*, IRExpr*,
+                                IRExpr*, IRExpr*, IRExpr*, IRExpr* );
+extern IRExpr** mkIRExprVec_9 ( IRExpr*, IRExpr*, IRExpr*, IRExpr*,
+                                IRExpr*, IRExpr*, IRExpr*, IRExpr*, IRExpr* );
+extern IRExpr** mkIRExprVec_13 ( IRExpr*, IRExpr*, IRExpr*, IRExpr*,
+                                 IRExpr*, IRExpr*, IRExpr*, IRExpr*,
+                                 IRExpr*, IRExpr*, IRExpr*, IRExpr*, IRExpr* );
+
+/* IRExpr copiers:
+   - shallowCopy: shallow-copy (ie. create a new vector that shares the
+     elements with the original).
+   - deepCopy: deep-copy (ie. create a completely new vector). */
+extern IRExpr** shallowCopyIRExprVec ( IRExpr** );
+extern IRExpr** deepCopyIRExprVec ( IRExpr *const * );
+
+/* Make a constant expression from the given host word taking into
+   account (of course) the host word size. */
+extern IRExpr* mkIRExpr_HWord ( HWord );
+
+/* Convenience function for constructing clean helper calls. */
+extern 
+IRExpr* mkIRExprCCall ( IRType retty,
+                        Int regparms, const HChar* name, void* addr, 
+                        IRExpr** args );
+
+
+/* Convenience functions for atoms (IRExprs which are either Iex_Tmp or
+ * Iex_Const). */
+static inline Bool isIRAtom ( const IRExpr* e ) {
+   return toBool(e->tag == Iex_RdTmp || e->tag == Iex_Const);
+}
+
+/* Are these two IR atoms identical?  Causes an assertion
+   failure if they are passed non-atoms. */
+extern Bool eqIRAtom ( const IRExpr*, const IRExpr* );
+
+
+/* ------------------ Jump kinds ------------------ */
+
+/* This describes hints which can be passed to the dispatcher at guest
+   control-flow transfer points.
+
+   Re Ijk_InvalICache and Ijk_FlushDCache: the guest state _must_ have
+   two pseudo-registers, guest_CMSTART and guest_CMLEN, which specify
+   the start and length of the region to be invalidated.  CM stands
+   for "Cache Management".  These are both the size of a guest word.
+   It is the responsibility of the relevant toIR.c to ensure that
+   these are filled in with suitable values before issuing a jump of
+   kind Ijk_InvalICache or Ijk_FlushDCache.
+
+   Ijk_InvalICache requests invalidation of translations taken from
+   the requested range.  Ijk_FlushDCache requests flushing of the D
+   cache for the specified range.
+
+   Re Ijk_EmWarn and Ijk_EmFail: the guest state must have a
+   pseudo-register guest_EMNOTE, which is 32-bits regardless of the
+   host or guest word size.  That register should be made to hold a
+   VexEmNote value to indicate the reason for the exit.
+
+   In the case of Ijk_EmFail, the exit is fatal (Vex-generated code
+   cannot continue) and so the jump destination can be anything.
+
+   Re Ijk_Sys_ (syscall jumps): the guest state must have a
+   pseudo-register guest_IP_AT_SYSCALL, which is the size of a guest
+   word.  Front ends should set this to be the IP at the most recently
+   executed kernel-entering (system call) instruction.  This makes it
+   very much easier (viz, actually possible at all) to back up the
+   guest to restart a syscall that has been interrupted by a signal.
+*/
+typedef
+   enum {
+      Ijk_INVALID=0x1A00, 
+      Ijk_Boring,         /* not interesting; just goto next */
+      Ijk_Call,           /* guest is doing a call */
+      Ijk_Ret,            /* guest is doing a return */
+      Ijk_ClientReq,      /* do guest client req before continuing */
+      Ijk_Yield,          /* client is yielding to thread scheduler */
+      Ijk_EmWarn,         /* report emulation warning before continuing */
+      Ijk_EmFail,         /* emulation critical (FATAL) error; give up */
+      Ijk_NoDecode,       /* current instruction cannot be decoded */
+      Ijk_MapFail,        /* Vex-provided address translation failed */
+      Ijk_InvalICache,    /* Inval icache for range [CMSTART, +CMLEN) */
+      Ijk_FlushDCache,    /* Flush dcache for range [CMSTART, +CMLEN) */
+      Ijk_NoRedir,        /* Jump to un-redirected guest addr */
+      Ijk_SigILL,         /* current instruction synths SIGILL */
+      Ijk_SigTRAP,        /* current instruction synths SIGTRAP */
+      Ijk_SigSEGV,        /* current instruction synths SIGSEGV */
+      Ijk_SigBUS,         /* current instruction synths SIGBUS */
+      Ijk_SigFPE,         /* current instruction synths generic SIGFPE */
+      Ijk_SigFPE_IntDiv,  /* current instruction synths SIGFPE - IntDiv */
+      Ijk_SigFPE_IntOvf,  /* current instruction synths SIGFPE - IntOvf */
+      Ijk_Privileged,     /* current instruction should fail depending on privilege level */
+      /* Unfortunately, various guest-dependent syscall kinds.  They
+	 all mean: do a syscall before continuing. */
+      Ijk_Sys_syscall,    /* amd64/x86 'syscall', ppc 'sc', arm 'svc #0' */
+      Ijk_Sys_int,        /* amd64/x86 'int *' */
+      Ijk_Sys_int32,      /* amd64/x86 'int $0x20' */
+      Ijk_Sys_int128,     /* amd64/x86 'int $0x80' */
+      Ijk_Sys_int129,     /* amd64/x86 'int $0x81' */
+      Ijk_Sys_int130,     /* amd64/x86 'int $0x82' */
+      Ijk_Sys_int145,     /* amd64/x86 'int $0x91' */
+      Ijk_Sys_int210,     /* amd64/x86 'int $0xD2' */
+      Ijk_Sys_sysenter    /* x86 'sysenter'.  guest_EIP becomes 
+                             invalid at the point this happens. */
+   }
+   IRJumpKind;
+
+extern void ppIRJumpKind ( IRJumpKind );
+
+
+/* ------------------ Dirty helper calls ------------------ */
+
+/* A dirty call is a flexible mechanism for calling (possibly
+   conditionally) a helper function or procedure.  The helper function
+   may read, write or modify client memory, and may read, write or
+   modify client state.  It can take arguments and optionally return a
+   value.  It may return different results and/or do different things
+   when called repeatedly with the same arguments, by means of storing
+   private state.
+
+   If a value is returned, it is assigned to the nominated return
+   temporary.
+
+   Dirty calls are statements rather than expressions for obvious
+   reasons.  If a dirty call is marked as writing guest state, any
+   pre-existing values derived from the written parts of the guest
+   state are invalid.  Similarly, if the dirty call is stated as
+   writing memory, any pre-existing loaded values are invalidated by
+   it.
+
+   In order that instrumentation is possible, the call must state, and
+   state correctly:
+
+   * Whether it reads, writes or modifies memory, and if so where.
+
+   * Whether it reads, writes or modifies guest state, and if so which
+     pieces.  Several pieces may be stated, and their extents must be
+     known at translation-time.  Each piece is allowed to repeat some
+     number of times at a fixed interval, if required.
+
+   Normally, code is generated to pass just the args to the helper.
+   However, if IRExpr_GSPTR() is present in the argument list (at most
+   one instance is allowed), then the guest state pointer is passed for
+   that arg, so that the callee can access the guest state.  It is
+   invalid for .nFxState to be zero but IRExpr_GSPTR() to be present,
+   since .nFxState==0 is a claim that the call does not access guest
+   state.
+
+   IMPORTANT NOTE re GUARDS: Dirty calls are strict, very strict.  The
+   arguments and 'mFx' are evaluated REGARDLESS of the guard value.
+   The order of argument evaluation is unspecified.  The guard
+   expression is evaluated AFTER the arguments and 'mFx' have been
+   evaluated.  'mFx' is expected (by Memcheck) to be a defined value
+   even if the guard evaluates to false.
+*/
+
+#define VEX_N_FXSTATE  7   /* enough for FXSAVE/FXRSTOR on x86 */
+
+/* Effects on resources (eg. registers, memory locations) */
+typedef
+   enum {
+      Ifx_None=0x1B00,      /* no effect */
+      Ifx_Read,             /* reads the resource */
+      Ifx_Write,            /* writes the resource */
+      Ifx_Modify,           /* modifies the resource */
+   }
+   IREffect;
+
+/* Pretty-print an IREffect */
+extern void ppIREffect ( IREffect );
+
+typedef
+   struct _IRDirty {
+      /* What to call, and details of args/results.  .guard must be
+         non-NULL.  If .tmp is not IRTemp_INVALID, then the call
+         returns a result which is placed in .tmp.  If at runtime the
+         guard evaluates to false, .tmp has an 0x555..555 bit pattern
+         written to it.  Hence conditional calls that assign .tmp are
+         allowed. */
+      IRCallee* cee;    /* where to call */
+      IRExpr*   guard;  /* :: Ity_Bit.  Controls whether call happens */
+      /* The args vector may contain IRExpr_GSPTR() and/or
+         IRExpr_VECRET(), in both cases, at most once. */
+      IRExpr**  args;   /* arg vector, ends in NULL. */
+      IRTemp    tmp;    /* to assign result to, or IRTemp_INVALID if none */
+
+      /* Mem effects; we allow only one R/W/M region to be stated */
+      IREffect  mFx;    /* indicates memory effects, if any */
+      IRExpr*   mAddr;  /* of access, or NULL if mFx==Ifx_None */
+      Int       mSize;  /* of access, or zero if mFx==Ifx_None */
+
+      /* Guest state effects; up to N allowed */
+      Int  nFxState; /* must be 0 .. VEX_N_FXSTATE */
+      struct {
+         IREffect fx:16;   /* read, write or modify?  Ifx_None is invalid. */
+         UShort   offset;
+         UShort   size;
+         UChar    nRepeats;
+         UChar    repeatLen;
+      } fxState[VEX_N_FXSTATE];
+      /* The access can be repeated, as specified by nRepeats and
+         repeatLen.  To describe only a single access, nRepeats and
+         repeatLen should be zero.  Otherwise, repeatLen must be a
+         multiple of size and greater than size. */
+      /* Overall, the parts of the guest state denoted by (offset,
+         size, nRepeats, repeatLen) is
+               [offset, +size)
+            and, if nRepeats > 0,
+               for (i = 1; i <= nRepeats; i++)
+                  [offset + i * repeatLen, +size)
+         A convenient way to enumerate all segments is therefore
+            for (i = 0; i < 1 + nRepeats; i++)
+               [offset + i * repeatLen, +size)
+      */
+   }
+   IRDirty;
+
+/* Pretty-print a dirty call */
+extern void     ppIRDirty ( const IRDirty* );
+
+/* Allocate an uninitialised dirty call */
+extern IRDirty* emptyIRDirty ( void );
+
+/* Deep-copy a dirty call */
+extern IRDirty* deepCopyIRDirty ( const IRDirty* );
+
+/* A handy function which takes some of the tedium out of constructing
+   dirty helper calls.  The called function impliedly does not return
+   any value and has a constant-True guard.  The call is marked as
+   accessing neither guest state nor memory (hence the "unsafe"
+   designation) -- you can change this marking later if need be.  A
+   suitable IRCallee is constructed from the supplied bits. */
+extern 
+IRDirty* unsafeIRDirty_0_N ( Int regparms, const HChar* name, void* addr, 
+                             IRExpr** args );
+
+/* Similarly, make a zero-annotation dirty call which returns a value,
+   and assign that to the given temp. */
+extern 
+IRDirty* unsafeIRDirty_1_N ( IRTemp dst, 
+                             Int regparms, const HChar* name, void* addr, 
+                             IRExpr** args );
+
+
+/* --------------- Memory Bus Events --------------- */
+
+typedef
+   enum { 
+      Imbe_Fence=0x1C00, 
+      /* Needed only on ARM.  It cancels a reservation made by a
+         preceding Linked-Load, and needs to be handed through to the
+         back end, just as LL and SC themselves are. */
+      Imbe_CancelReservation
+   }
+   IRMBusEvent;
+
+extern void ppIRMBusEvent ( IRMBusEvent );
+
+
+/* --------------- Compare and Swap --------------- */
+
+/* This denotes an atomic compare and swap operation, either
+   a single-element one or a double-element one.
+
+   In the single-element case:
+
+     .addr is the memory address.
+     .end  is the endianness with which memory is accessed
+
+     If .addr contains the same value as .expdLo, then .dataLo is
+     written there, else there is no write.  In both cases, the
+     original value at .addr is copied into .oldLo.
+
+     Types: .expdLo, .dataLo and .oldLo must all have the same type.
+     It may be any integral type, viz: I8, I16, I32 or, for 64-bit
+     guests, I64.
+
+     .oldHi must be IRTemp_INVALID, and .expdHi and .dataHi must
+     be NULL.
+
+   In the double-element case:
+
+     .addr is the memory address.
+     .end  is the endianness with which memory is accessed
+
+     The operation is the same:
+
+     If .addr contains the same value as .expdHi:.expdLo, then
+     .dataHi:.dataLo is written there, else there is no write.  In
+     both cases the original value at .addr is copied into
+     .oldHi:.oldLo.
+
+     Types: .expdHi, .expdLo, .dataHi, .dataLo, .oldHi, .oldLo must
+     all have the same type, which may be any integral type, viz: I8,
+     I16, I32 or, for 64-bit guests, I64.
+
+     The double-element case is complicated by the issue of
+     endianness.  In all cases, the two elements are understood to be
+     located adjacently in memory, starting at the address .addr.
+
+       If .end is Iend_LE, then the .xxxLo component is at the lower
+       address and the .xxxHi component is at the higher address, and
+       each component is itself stored little-endianly.
+
+       If .end is Iend_BE, then the .xxxHi component is at the lower
+       address and the .xxxLo component is at the higher address, and
+       each component is itself stored big-endianly.
+
+   This allows representing more cases than most architectures can
+   handle.  For example, x86 cannot do DCAS on 8- or 16-bit elements.
+
+   How to know if the CAS succeeded?
+
+   * if .oldLo == .expdLo (resp. .oldHi:.oldLo == .expdHi:.expdLo),
+     then the CAS succeeded, .dataLo (resp. .dataHi:.dataLo) is now
+     stored at .addr, and the original value there was .oldLo (resp
+     .oldHi:.oldLo).
+
+   * if .oldLo != .expdLo (resp. .oldHi:.oldLo != .expdHi:.expdLo),
+     then the CAS failed, and the original value at .addr was .oldLo
+     (resp. .oldHi:.oldLo).
+
+   Hence it is easy to know whether or not the CAS succeeded.
+*/
+typedef
+   struct {
+      IRTemp    oldHi;  /* old value of *addr is written here */
+      IRTemp    oldLo;
+      IREndness end;    /* endianness of the data in memory */
+      IRExpr*   addr;   /* store address */
+      IRExpr*   expdHi; /* expected old value at *addr */
+      IRExpr*   expdLo;
+      IRExpr*   dataHi; /* new value for *addr */
+      IRExpr*   dataLo;
+   }
+   IRCAS;
+
+extern void ppIRCAS ( const IRCAS* cas );
+
+extern IRCAS* mkIRCAS ( IRTemp oldHi, IRTemp oldLo,
+                        IREndness end, IRExpr* addr, 
+                        IRExpr* expdHi, IRExpr* expdLo,
+                        IRExpr* dataHi, IRExpr* dataLo );
+
+extern IRCAS* deepCopyIRCAS ( const IRCAS* );
+
+
+/* ------------------ Circular Array Put ------------------ */
+
+typedef
+   struct {
+      IRRegArray* descr; /* Part of guest state treated as circular */
+      IRExpr*     ix;    /* Variable part of index into array */
+      Int         bias;  /* Constant offset part of index into array */
+      IRExpr*     data;  /* The value to write */
+   } IRPutI;
+
+extern void ppIRPutI ( const IRPutI* puti );
+
+extern IRPutI* mkIRPutI ( IRRegArray* descr, IRExpr* ix,
+                          Int bias, IRExpr* data );
+
+extern IRPutI* deepCopyIRPutI ( const IRPutI* );
+
+
+/* --------------- Guarded loads and stores --------------- */
+
+/* Conditional stores are straightforward.  They are the same as
+   normal stores, with an extra 'guard' field :: Ity_I1 that
+   determines whether or not the store actually happens.  If not,
+   memory is unmodified.
+
+   The semantics of this is that 'addr' and 'data' are fully evaluated
+   even in the case where 'guard' evaluates to zero (false).
+*/
+typedef
+   struct {
+      IREndness end;    /* Endianness of the store */
+      IRExpr*   addr;   /* store address */
+      IRExpr*   data;   /* value to write */
+      IRExpr*   guard;  /* Guarding value */
+   }
+   IRStoreG;
+
+/* Conditional loads are a little more complex.  'addr' is the
+   address, 'guard' is the guarding condition.  If the load takes
+   place, the loaded value is placed in 'dst'.  If it does not take
+   place, 'alt' is copied to 'dst'.  However, the loaded value is not
+   placed directly in 'dst' -- it is first subjected to the conversion
+   specified by 'cvt'.
+
+   For example, imagine doing a conditional 8-bit load, in which the
+   loaded value is zero extended to 32 bits.  Hence:
+   * 'dst' and 'alt' must have type I32
+   * 'cvt' must be a unary op which converts I8 to I32.  In this 
+     example, it would be ILGop_8Uto32.
+
+   There is no explicit indication of the type at which the load is
+   done, since that is inferrable from the arg type of 'cvt'.  Note
+   that the types of 'alt' and 'dst' and the result type of 'cvt' must
+   all be the same.
+
+   Semantically, 'addr' is evaluated even in the case where 'guard'
+   evaluates to zero (false), and 'alt' is evaluated even when 'guard'
+   evaluates to one (true).  That is, 'addr' and 'alt' are always
+   evaluated.
+*/
+typedef
+   enum {
+      ILGop_INVALID=0x1D00,
+      ILGop_IdentV128, /* 128 bit vector, no conversion */
+      ILGop_Ident64,   /* 64 bit, no conversion */
+      ILGop_Ident32,   /* 32 bit, no conversion */
+      ILGop_16Uto32,   /* 16 bit load, Z-widen to 32 */
+      ILGop_16Sto32,   /* 16 bit load, S-widen to 32 */
+      ILGop_8Uto32,    /* 8 bit load, Z-widen to 32 */
+      ILGop_8Sto32     /* 8 bit load, S-widen to 32 */
+   }
+   IRLoadGOp;
+
+typedef
+   struct {
+      IREndness end;    /* Endianness of the load */
+      IRLoadGOp cvt;    /* Conversion to apply to the loaded value */
+      IRTemp    dst;    /* Destination (LHS) of assignment */
+      IRExpr*   addr;   /* Address being loaded from */
+      IRExpr*   alt;    /* Value if load is not done. */
+      IRExpr*   guard;  /* Guarding value */
+   }
+   IRLoadG;
+
+extern void ppIRStoreG ( const IRStoreG* sg );
+
+extern void ppIRLoadGOp ( IRLoadGOp cvt );
+
+extern void ppIRLoadG ( const IRLoadG* lg );
+
+extern IRStoreG* mkIRStoreG ( IREndness end,
+                              IRExpr* addr, IRExpr* data,
+                              IRExpr* guard );
+
+extern IRLoadG* mkIRLoadG ( IREndness end, IRLoadGOp cvt,
+                            IRTemp dst, IRExpr* addr, IRExpr* alt, 
+                            IRExpr* guard );
+
+
+/* ------------------ Statements ------------------ */
+
+/* The different kinds of statements.  Their meaning is explained
+   below in the comments for IRStmt.
+
+   Those marked META do not represent code, but rather extra
+   information about the code.  These statements can be removed
+   without affecting the functional behaviour of the code, however
+   they are required by some IR consumers such as tools that
+   instrument the code.
+*/
+
+typedef 
+   enum {
+      Ist_NoOp=0x1E00,
+      Ist_IMark,     /* META */
+      Ist_AbiHint,   /* META */
+      Ist_Put,
+      Ist_PutI,
+      Ist_WrTmp,
+      Ist_Store,
+      Ist_LoadG,
+      Ist_StoreG,
+      Ist_CAS,
+      Ist_LLSC,
+      Ist_Dirty,
+      Ist_MBE,
+      Ist_Exit
+   } 
+   IRStmtTag;
+
+/* A statement.  Stored as a tagged union.  'tag' indicates what kind
+   of expression this is.  'Ist' is the union that holds the fields.
+   If an IRStmt 'st' has st.tag equal to Iex_Store, then it's a store
+   statement, and the fields can be accessed with
+   'st.Ist.Store.<fieldname>'.
+
+   For each kind of statement, we show what it looks like when
+   pretty-printed with ppIRStmt().
+*/
+typedef
+   struct _IRStmt {
+      IRStmtTag tag;
+      union {
+         /* A no-op (usually resulting from IR optimisation).  Can be
+            omitted without any effect.
+
+            ppIRStmt output: IR-NoOp
+         */
+         struct {
+			 UInt dummy;
+	 } NoOp;
+
+         /* META: instruction mark.  Marks the start of the statements
+            that represent a single machine instruction (the end of
+            those statements is marked by the next IMark or the end of
+            the IRSB).  Contains the address and length of the
+            instruction.
+
+            It also contains a delta value.  The delta must be
+            subtracted from a guest program counter value before
+            attempting to establish, by comparison with the address
+            and length values, whether or not that program counter
+            value refers to this instruction.  For x86, amd64, ppc32,
+            ppc64 and arm, the delta value is zero.  For Thumb
+            instructions, the delta value is one.  This is because, on
+            Thumb, guest PC values (guest_R15T) are encoded using the
+            top 31 bits of the instruction address and a 1 in the lsb;
+            hence they appear to be (numerically) 1 past the start of
+            the instruction they refer to.  IOW, guest_R15T on ARM
+            holds a standard ARM interworking address.
+
+            ppIRStmt output: ------ IMark(<addr>, <len>, <delta>) ------,
+                         eg. ------ IMark(0x4000792, 5, 0) ------,
+         */
+         struct {
+            Addr   addr;   /* instruction address */
+            UInt   len;    /* instruction length */
+            UChar  delta;  /* addr = program counter as encoded in guest state
+                                     - delta */
+         } IMark;
+
+         /* META: An ABI hint, which says something about this
+            platform's ABI.
+
+            At the moment, the only AbiHint is one which indicates
+            that a given chunk of address space, [base .. base+len-1],
+            has become undefined.  This is used on amd64-linux and
+            some ppc variants to pass stack-redzoning hints to whoever
+            wants to see them.  It also indicates the address of the
+            next (dynamic) instruction that will be executed.  This is
+            to help Memcheck to origin tracking.
+
+            ppIRStmt output: ====== AbiHint(<base>, <len>, <nia>) ======
+                         eg. ====== AbiHint(t1, 16, t2) ======
+         */
+         struct {
+            IRExpr* base;     /* Start  of undefined chunk */
+            Int     len;      /* Length of undefined chunk */
+            IRExpr* nia;      /* Address of next (guest) insn */
+         } AbiHint;
+
+         /* Write a guest register, at a fixed offset in the guest state.
+            ppIRStmt output: PUT(<offset>) = <data>, eg. PUT(60) = t1
+         */
+         struct {
+            Int     offset;   /* Offset into the guest state */
+            IRExpr* data;     /* The value to write */
+         } Put;
+
+         /* Write a guest register, at a non-fixed offset in the guest
+            state.  See the comment for GetI expressions for more
+            information.
+
+            ppIRStmt output: PUTI<descr>[<ix>,<bias>] = <data>,
+                         eg. PUTI(64:8xF64)[t5,0] = t1
+         */
+         struct {
+            IRPutI* details;
+         } PutI;
+
+         /* Assign a value to a temporary.  Note that SSA rules require
+            each tmp is only assigned to once.  IR sanity checking will
+            reject any block containing a temporary which is not assigned
+            to exactly once.
+
+            ppIRStmt output: t<tmp> = <data>, eg. t1 = 3
+         */
+         struct {
+            IRTemp  tmp;   /* Temporary  (LHS of assignment) */
+            IRExpr* data;  /* Expression (RHS of assignment) */
+         } WrTmp;
+
+         /* Write a value to memory.  This is a normal store, not a
+            Store-Conditional.  To represent a Store-Conditional,
+            instead use IRStmt.LLSC.
+            ppIRStmt output: ST<end>(<addr>) = <data>, eg. STle(t1) = t2
+         */
+         struct {
+            IREndness end;    /* Endianness of the store */
+            IRExpr*   addr;   /* store address */
+            IRExpr*   data;   /* value to write */
+         } Store;
+
+         /* Guarded store.  Note that this is defined to evaluate all
+            expression fields (addr, data) even if the guard evaluates
+            to false.
+            ppIRStmt output:
+              if (<guard>) ST<end>(<addr>) = <data> */
+         struct {
+            IRStoreG* details;
+         } StoreG;
+
+         /* Guarded load.  Note that this is defined to evaluate all
+            expression fields (addr, alt) even if the guard evaluates
+            to false.
+            ppIRStmt output:
+              t<tmp> = if (<guard>) <cvt>(LD<end>(<addr>)) else <alt> */
+         struct {
+            IRLoadG* details;
+         } LoadG;
+
+         /* Do an atomic compare-and-swap operation.  Semantics are
+            described above on a comment at the definition of IRCAS.
+
+            ppIRStmt output:
+               t<tmp> = CAS<end>(<addr> :: <expected> -> <new>)
+            eg
+               t1 = CASle(t2 :: t3->Add32(t3,1))
+               which denotes a 32-bit atomic increment 
+               of a value at address t2
+
+            A double-element CAS may also be denoted, in which case <tmp>,
+            <expected> and <new> are all pairs of items, separated by
+            commas.
+         */
+         struct {
+            IRCAS* details;
+         } CAS;
+
+         /* Either Load-Linked or Store-Conditional, depending on
+            STOREDATA.
+
+            If STOREDATA is NULL then this is a Load-Linked, meaning
+            that data is loaded from memory as normal, but a
+            'reservation' for the address is also lodged in the
+            hardware.
+
+               result = Load-Linked(addr, end)
+
+            The data transfer type is the type of RESULT (I32, I64,
+            etc).  ppIRStmt output:
+
+               result = LD<end>-Linked(<addr>), eg. LDbe-Linked(t1)
+
+            If STOREDATA is not NULL then this is a Store-Conditional,
+            hence:
+
+               result = Store-Conditional(addr, storedata, end)
+
+            The data transfer type is the type of STOREDATA and RESULT
+            has type Ity_I1. The store may fail or succeed depending
+            on the state of a previously lodged reservation on this
+            address.  RESULT is written 1 if the store succeeds and 0
+            if it fails.  eg ppIRStmt output:
+
+               result = ( ST<end>-Cond(<addr>) = <storedata> )
+               eg t3 = ( STbe-Cond(t1, t2) )
+
+            In all cases, the address must be naturally aligned for
+            the transfer type -- any misaligned addresses should be
+            caught by a dominating IR check and side exit.  This
+            alignment restriction exists because on at least some
+            LL/SC platforms (ppc), stwcx. etc will trap w/ SIGBUS on
+            misaligned addresses, and we have to actually generate
+            stwcx. on the host, and we don't want it trapping on the
+            host.
+
+            Summary of rules for transfer type:
+              STOREDATA == NULL (LL):
+                transfer type = type of RESULT
+              STOREDATA != NULL (SC):
+                transfer type = type of STOREDATA, and RESULT :: Ity_I1
+         */
+         struct {
+            IREndness end;
+            IRTemp    result;
+            IRExpr*   addr;
+            IRExpr*   storedata; /* NULL => LL, non-NULL => SC */
+         } LLSC;
+
+         /* Call (possibly conditionally) a C function that has side
+            effects (ie. is "dirty").  See the comments above the
+            IRDirty type declaration for more information.
+
+            ppIRStmt output:
+               t<tmp> = DIRTY <guard> <effects> 
+                  ::: <callee>(<args>)
+            eg.
+               t1 = DIRTY t27 RdFX-gst(16,4) RdFX-gst(60,4)
+                     ::: foo{0x380035f4}(t2)
+         */       
+         struct {
+            IRDirty* details;
+         } Dirty;
+
+         /* A memory bus event - a fence, or acquisition/release of the
+            hardware bus lock.  IR optimisation treats all these as fences
+            across which no memory references may be moved.
+            ppIRStmt output: MBusEvent-Fence,
+                             MBusEvent-BusLock, MBusEvent-BusUnlock.
+         */
+         struct {
+            IRMBusEvent event;
+         } MBE;
+
+         /* Conditional exit from the middle of an IRSB.
+            ppIRStmt output: if (<guard>) goto {<jk>} <dst>
+                         eg. if (t69) goto {Boring} 0x4000AAA:I32
+            If <guard> is true, the guest state is also updated by
+            PUT-ing <dst> at <offsIP>.  This is done because a
+            taken exit must update the guest program counter.
+         */
+         struct {
+            IRExpr*    guard;    /* Conditional expression */
+            IRConst*   dst;      /* Jump target (constant only) */
+            IRJumpKind jk;       /* Jump kind */
+            Int        offsIP;   /* Guest state offset for IP */
+         } Exit;
+      } Ist;
+   }
+   IRStmt;
+
+/* Statement constructors. */
+extern IRStmt* IRStmt_NoOp    ( void );
+extern IRStmt* IRStmt_IMark   ( Addr addr, UInt len, UChar delta );
+extern IRStmt* IRStmt_AbiHint ( IRExpr* base, Int len, IRExpr* nia );
+extern IRStmt* IRStmt_Put     ( Int off, IRExpr* data );
+extern IRStmt* IRStmt_PutI    ( IRPutI* details );
+extern IRStmt* IRStmt_WrTmp   ( IRTemp tmp, IRExpr* data );
+extern IRStmt* IRStmt_Store   ( IREndness end, IRExpr* addr, IRExpr* data );
+extern IRStmt* IRStmt_StoreG  ( IREndness end, IRExpr* addr, IRExpr* data,
+                                IRExpr* guard );
+extern IRStmt* IRStmt_LoadG   ( IREndness end, IRLoadGOp cvt, IRTemp dst,
+                                IRExpr* addr, IRExpr* alt, IRExpr* guard );
+extern IRStmt* IRStmt_CAS     ( IRCAS* details );
+extern IRStmt* IRStmt_LLSC    ( IREndness end, IRTemp result,
+                                IRExpr* addr, IRExpr* storedata );
+extern IRStmt* IRStmt_Dirty   ( IRDirty* details );
+extern IRStmt* IRStmt_MBE     ( IRMBusEvent event );
+extern IRStmt* IRStmt_Exit    ( IRExpr* guard, IRJumpKind jk, IRConst* dst,
+                                Int offsIP );
+
+/* Deep-copy an IRStmt. */
+extern IRStmt* deepCopyIRStmt ( const IRStmt* );
+
+/* Pretty-print an IRStmt. */
+extern void ppIRStmt ( const IRStmt* );
+
+
+/* ------------------ Basic Blocks ------------------ */
+
+/* Type environments: a bunch of statements, expressions, etc, are
+   incomplete without an environment indicating the type of each
+   IRTemp.  So this provides one.  IR temporaries are really just
+   unsigned ints and so this provides an array, 0 .. n_types_used-1 of
+   them.
+*/
+typedef
+   struct {
+      IRType* types;
+      Int     types_size;
+      Int     types_used;
+   }
+   IRTypeEnv;
+
+/* Obtain a new IRTemp */
+extern IRTemp newIRTemp ( IRTypeEnv*, IRType );
+
+/* Deep-copy a type environment */
+extern IRTypeEnv* deepCopyIRTypeEnv ( const IRTypeEnv* );
+
+/* Pretty-print a type environment */
+extern void ppIRTypeEnv ( const IRTypeEnv* );
+
+
+/* Code blocks, which in proper compiler terminology are superblocks
+   (single entry, multiple exit code sequences) contain:
+
+   - A table giving a type for each temp (the "type environment")
+   - An expandable array of statements
+   - An expression of type 32 or 64 bits, depending on the
+     guest's word size, indicating the next destination if the block 
+     executes all the way to the end, without a side exit
+   - An indication of any special actions (JumpKind) needed
+     for this final jump.
+   - Offset of the IP field in the guest state.  This will be
+     updated before the final jump is done.
+   
+   "IRSB" stands for "IR Super Block".
+*/
+typedef
+   struct {
+      IRTypeEnv* tyenv;
+      IRStmt**   stmts;
+      Int        stmts_size;
+      Int        stmts_used;
+      IRExpr*    next;
+      IRJumpKind jumpkind;
+      Int        offsIP;
+   }
+   IRSB;
+
+/* Allocate a new, uninitialised IRSB */
+extern IRSB* emptyIRSB ( void );
+
+/* Deep-copy an IRSB */
+extern IRSB* deepCopyIRSB ( const IRSB* );
+
+/* Deep-copy an IRSB, except for the statements list, which set to be
+   a new, empty, list of statements. */
+extern IRSB* deepCopyIRSBExceptStmts ( const IRSB* );
+
+/* Pretty-print an IRSB */
+extern void ppIRSB ( const IRSB* );
+
+/* Append an IRStmt to an IRSB */
+extern void addStmtToIRSB ( IRSB*, IRStmt* );
+
+
+/*---------------------------------------------------------------*/
+/*--- Helper functions for the IR                             ---*/
+/*---------------------------------------------------------------*/
+
+/* For messing with IR type environments */
+extern IRTypeEnv* emptyIRTypeEnv  ( void );
+
+/* What is the type of this expression? */
+extern IRType typeOfIRConst ( const IRConst* );
+extern IRType typeOfIRTemp  ( const IRTypeEnv*, IRTemp );
+extern IRType typeOfIRExpr  ( const IRTypeEnv*, const IRExpr* );
+
+/* What are the arg and result type for this IRLoadGOp? */
+extern void typeOfIRLoadGOp ( IRLoadGOp cvt,
+                              /*OUT*/IRType* t_res,
+                              /*OUT*/IRType* t_arg );
+
+/* Sanity check a BB of IR */
+extern void sanityCheckIRSB ( const  IRSB*  bb, 
+                              const  HChar* caller,
+                              Bool   require_flatness, 
+                              IRType guest_word_size );
+extern Bool isFlatIRStmt ( const IRStmt* );
+
+/* Is this any value actually in the enumeration 'IRType' ? */
+extern Bool isPlausibleIRType ( IRType ty );
+
+
+/*---------------------------------------------------------------*/
+/*--- IR injection                                            ---*/
+/*---------------------------------------------------------------*/
+
+void vex_inject_ir(IRSB *, IREndness);
+
+
+#endif /* ndef __LIBVEX_IR_H */
+
+/*---------------------------------------------------------------*/
+/*---                                             libvex_ir.h ---*/
+/*---------------------------------------------------------------*/