homeassistant 2025.11.0b2__py3-none-any.whl → 2025.11.2__py3-none-any.whl

homeassistant/components/homeassistant_hardware/firmware_config_flow.py

@@ -28,7 +28,7 @@ from homeassistant.config_entries import (
     OptionsFlow,
 )
 from homeassistant.core import callback
-from homeassistant.data_entry_flow import AbortFlow, progress_step
+from homeassistant.data_entry_flow import AbortFlow
 from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from homeassistant.helpers.hassio import is_hassio
@@ -97,6 +97,12 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
         self.addon_uninstall_task: asyncio.Task | None = None
         self.firmware_install_task: asyncio.Task[None] | None = None
         self.installing_firmware_name: str | None = None
+        self._install_otbr_addon_task: asyncio.Task[None] | None = None
+        self._start_otbr_addon_task: asyncio.Task[None] | None = None
+
+        # Progress flow steps cannot abort so we need to store the abort reason and then
+        # re-raise it in a dedicated step
+        self._progress_error: AbortFlow | None = None
 
     def _get_translation_placeholders(self) -> dict[str, str]:
         """Shared translation placeholders."""
@@ -106,6 +112,11 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
                 if self._probed_firmware_info is not None
                 else "unknown"
             ),
+            "firmware_name": (
+                self.installing_firmware_name
+                if self.installing_firmware_name is not None
+                else "unknown"
+            ),
             "model": self._hardware_name,
         }
 
@@ -182,22 +193,22 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
             return self.async_show_progress(
                 step_id=step_id,
                 progress_action="install_firmware",
-                description_placeholders={
-                    **self._get_translation_placeholders(),
-                    "firmware_name": firmware_name,
-                },
+                description_placeholders=self._get_translation_placeholders(),
                 progress_task=self.firmware_install_task,
             )
 
         try:
             await self.firmware_install_task
         except AbortFlow as err:
-            return self.async_show_progress_done(
-                next_step_id=err.reason,
-            )
+            self._progress_error = err
+            return self.async_show_progress_done(next_step_id="progress_failed")
         except HomeAssistantError:
             _LOGGER.exception("Failed to flash firmware")
-            return self.async_show_progress_done(next_step_id="firmware_install_failed")
+            self._progress_error = AbortFlow(
+                reason="fw_install_failed",
+                description_placeholders=self._get_translation_placeholders(),
+            )
+            return self.async_show_progress_done(next_step_id="progress_failed")
         finally:
             self.firmware_install_task = None
 
@@ -241,7 +252,10 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
                 _LOGGER.debug("Skipping firmware upgrade due to index download failure")
                 return
 
-            raise AbortFlow(reason="firmware_download_failed") from err
+            raise AbortFlow(
+                reason="fw_download_failed",
+                description_placeholders=self._get_translation_placeholders(),
+            ) from err
 
         if not firmware_install_required:
             assert self._probed_firmware_info is not None
@@ -270,7 +284,10 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
                 return
 
             # Otherwise, fail
-            raise AbortFlow(reason="firmware_download_failed") from err
+            raise AbortFlow(
+                reason="fw_download_failed",
+                description_placeholders=self._get_translation_placeholders(),
+            ) from err
 
         self._probed_firmware_info = await async_flash_silabs_firmware(
             hass=self.hass,
@@ -313,41 +330,6 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
 
         await otbr_manager.async_start_addon_waiting()
 
-    async def async_step_firmware_download_failed(
-        self, user_input: dict[str, Any] | None = None
-    ) -> ConfigFlowResult:
-        """Abort when firmware download failed."""
-        assert self.installing_firmware_name is not None
-        return self.async_abort(
-            reason="fw_download_failed",
-            description_placeholders={
-                **self._get_translation_placeholders(),
-                "firmware_name": self.installing_firmware_name,
-            },
-        )
-
-    async def async_step_firmware_install_failed(
-        self, user_input: dict[str, Any] | None = None
-    ) -> ConfigFlowResult:
-        """Abort when firmware install failed."""
-        assert self.installing_firmware_name is not None
-        return self.async_abort(
-            reason="fw_install_failed",
-            description_placeholders={
-                **self._get_translation_placeholders(),
-                "firmware_name": self.installing_firmware_name,
-            },
-        )
-
-    async def async_step_unsupported_firmware(
-        self, user_input: dict[str, Any] | None = None
-    ) -> ConfigFlowResult:
-        """Abort when unsupported firmware is detected."""
-        return self.async_abort(
-            reason="unsupported_firmware",
-            description_placeholders=self._get_translation_placeholders(),
-        )
-
     async def async_step_zigbee_installation_type(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
@@ -456,6 +438,10 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
         # This step is necessary to prevent `user_input` from being passed through
         return await self.async_step_continue_zigbee()
 
+    def _extra_zha_hardware_options(self) -> dict[str, Any]:
+        """Return extra ZHA hardware options."""
+        return {}
+
     async def async_step_continue_zigbee(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
@@ -478,6 +464,7 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
                 },
                 "radio_type": "ezsp",
                 "flow_strategy": self._zigbee_flow_strategy,
+                **self._extra_zha_hardware_options(),
             },
         )
         return self._continue_zha_flow(result)
@@ -506,16 +493,15 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
         """Install Thread firmware."""
         raise NotImplementedError
 
-    @progress_step(
-        description_placeholders=lambda self: {
-            **self._get_translation_placeholders(),
-            "addon_name": get_otbr_addon_manager(self.hass).addon_name,
-        }
-    )
-    async def async_step_install_otbr_addon(
+    async def async_step_progress_failed(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
-        """Show progress dialog for installing the OTBR addon."""
+        """Abort when progress step failed."""
+        assert self._progress_error is not None
+        raise self._progress_error
+
+    async def _async_install_otbr_addon(self) -> None:
+        """Do the work of installing the OTBR addon."""
         addon_manager = get_otbr_addon_manager(self.hass)
         addon_info = await self._async_get_addon_info(addon_manager)
 
@@ -533,18 +519,39 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
                 },
             ) from err
 
-        return await self.async_step_finish_thread_installation()
-
-    @progress_step(
-        description_placeholders=lambda self: {
-            **self._get_translation_placeholders(),
-            "addon_name": get_otbr_addon_manager(self.hass).addon_name,
-        }
-    )
-    async def async_step_start_otbr_addon(
+    async def async_step_install_otbr_addon(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
-        """Configure OTBR to point to the SkyConnect and run the addon."""
+        """Show progress dialog for installing the OTBR addon."""
+        if self._install_otbr_addon_task is None:
+            self._install_otbr_addon_task = self.hass.async_create_task(
+                self._async_install_otbr_addon(),
+                "Install OTBR addon",
+            )
+
+        if not self._install_otbr_addon_task.done():
+            return self.async_show_progress(
+                step_id="install_otbr_addon",
+                progress_action="install_otbr_addon",
+                description_placeholders={
+                    **self._get_translation_placeholders(),
+                    "addon_name": get_otbr_addon_manager(self.hass).addon_name,
+                },
+                progress_task=self._install_otbr_addon_task,
+            )
+
+        try:
+            await self._install_otbr_addon_task
+        except AbortFlow as err:
+            self._progress_error = err
+            return self.async_show_progress_done(next_step_id="progress_failed")
+        finally:
+            self._install_otbr_addon_task = None
+
+        return self.async_show_progress_done(next_step_id="finish_thread_installation")
+
+    async def _async_start_otbr_addon(self) -> None:
+        """Do the work of starting the OTBR addon."""
         try:
             await self._configure_and_start_otbr_addon()
         except AddonError as err:
@@ -557,7 +564,36 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
                 },
             ) from err
 
-        return await self.async_step_pre_confirm_otbr()
+    async def async_step_start_otbr_addon(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Configure OTBR to point to the SkyConnect and run the addon."""
+        if self._start_otbr_addon_task is None:
+            self._start_otbr_addon_task = self.hass.async_create_task(
+                self._async_start_otbr_addon(),
+                "Start OTBR addon",
+            )
+
+        if not self._start_otbr_addon_task.done():
+            return self.async_show_progress(
+                step_id="start_otbr_addon",
+                progress_action="start_otbr_addon",
+                description_placeholders={
+                    **self._get_translation_placeholders(),
+                    "addon_name": get_otbr_addon_manager(self.hass).addon_name,
+                },
+                progress_task=self._start_otbr_addon_task,
+            )
+
+        try:
+            await self._start_otbr_addon_task
+        except AbortFlow as err:
+            self._progress_error = err
+            return self.async_show_progress_done(next_step_id="progress_failed")
+        finally:
+            self._start_otbr_addon_task = None
+
+        return self.async_show_progress_done(next_step_id="pre_confirm_otbr")
 
     async def async_step_pre_confirm_otbr(
         self, user_input: dict[str, Any] | None = None

homeassistant/components/homeassistant_hardware/translations/sv.json

@@ -41,9 +41,12 @@
                         "pick_firmware_zigbee_migrate": "Detta kommer att flytta ditt Zigbee n\u00e4tverk till den nya adaptern."
                     },
                     "menu_options": {
+                        "pick_firmware_thread": "Anv\u00e4nd som Thread-adapter",
                         "pick_firmware_thread_migrate": "Migrera Thread till en ny adapter",
+                        "pick_firmware_zigbee": "Anv\u00e4nd som Zigbee-adapter",
                         "pick_firmware_zigbee_migrate": "Migrera Zigbee till en ny adapter"
-                    }
+                    },
+                    "title": "V\u00e4lj ditt protokoll"
                 },
                 "zigbee_installation_type": {
                     "description": "V\u00e4lj installationstyp f\u00f6r Zigbee-adaptern.",
@@ -110,7 +113,7 @@
                     "data": {
                         "channel": "Kanal"
                     },
-                    "description": "Starta ett kanalbyte f\u00f6r dina Zigbee- och Thread-n\u00e4tverk.\n\nObs: detta \u00e4r en avancerad \u00e5tg\u00e4rd som kan leda till att dina Thread- och Zigbee-n\u00e4tverk inte fungerar om den nya kanalen \u00e4r \u00f6verbelastad. Beroende p\u00e5 befintliga n\u00e4tverksf\u00f6rh\u00e5llanden kanske m\u00e5nga av dina enheter inte migrerar till den nya kanalen och kommer att beh\u00f6va \u00e5teranslutas innan de b\u00f6rjar fungera igen. Anv\u00e4nd med f\u00f6rsiktighet.\n\nN\u00e4r du har valt **[%key_id:133450972%]** startar kanalbytet tyst i bakgrunden och avslutas efter n\u00e5gra minuter.",
+                    "description": "Starta ett kanalbyte f\u00f6r dina Zigbee- och Thread-n\u00e4tverk.\n\nObs: detta \u00e4r en avancerad \u00e5tg\u00e4rd som kan leda till att dina Thread- och Zigbee-n\u00e4tverk inte fungerar om den nya kanalen \u00e4r \u00f6verbelastad. Beroende p\u00e5 befintliga n\u00e4tverksf\u00f6rh\u00e5llanden kanske m\u00e5nga av dina enheter inte migrerar till den nya kanalen och kommer att beh\u00f6va \u00e5teranslutas innan de b\u00f6rjar fungera igen. Anv\u00e4nd med f\u00f6rsiktighet.\n\nN\u00e4r du har valt **Bekr\u00e4fta** startar kanalbytet tyst i bakgrunden och avslutas efter n\u00e5gra minuter.",
                     "title": "Omkonfigurera st\u00f6d f\u00f6r multiprotokoll p\u00e5 IEEE 802.15.4 radio"
                 },
                 "install_addon": {

homeassistant/components/homeassistant_hardware/translations/vi.json

@@ -16,6 +16,7 @@
                     "title": "\u0110\u00e3 b\u1eaft \u0111\u1ea7u thay \u0111\u1ed5i k\u00eanh"
                 },
                 "notify_unknown_multipan_user": {
+                    "description": "Home Assistant c\u00f3 th\u1ec3 t\u1ef1 \u0111\u1ed9ng thay \u0111\u1ed5i c\u00e1c k\u00eanh cho OTBR v\u00e0 ZHA. N\u1ebfu b\u1ea1n \u0111\u00e3 \u0111\u1ecbnh c\u1ea5u h\u00ecnh m\u1ed9t b\u1ed9 t\u00edch h\u1ee3p kh\u00e1c \u0111\u1ec3 s\u1eed d\u1ee5ng radio, v\u00ed d\u1ee5 Zigbee2MQTT, b\u1ea1n s\u1ebd ph\u1ea3i \u0111\u1ecbnh c\u1ea5u h\u00ecnh l\u1ea1i k\u00eanh trong b\u1ed9 t\u00edch h\u1ee3p \u0111\u00f3 sau khi ho\u00e0n th\u00e0nh h\u01b0\u1edbng d\u1eabn n\u00e0y.",
                     "title": "C\u00f3 th\u1ec3 c\u1ea7n c\u1ea5u h\u00ecnh th\u1ee7 c\u00f4ng"
                 },
                 "uninstall_addon": {

homeassistant/components/homeassistant_sky_connect/manifest.json

@@ -6,6 +6,12 @@
   "dependencies": ["hardware", "usb", "homeassistant_hardware"],
   "documentation": "https://www.home-assistant.io/integrations/homeassistant_sky_connect",
   "integration_type": "hardware",
+  "loggers": [
+    "bellows",
+    "universal_silabs_flasher",
+    "zigpy.serial",
+    "serial_asyncio_fast"
+  ],
   "usb": [
     {
       "description": "*skyconnect v1.0*",

homeassistant/components/homeassistant_sky_connect/translations/pt.json

@@ -90,6 +90,13 @@
             }
         }
     },
+    "entity": {
+        "switch": {
+            "beta_firmware": {
+                "name": "Atualiza\u00e7\u00f5es de firmware beta"
+            }
+        }
+    },
     "exceptions": {
         "device_disconnected": {
             "message": "O dispositivo n\u00e3o est\u00e1 ligado \u00e0 corrente"

homeassistant/components/homeassistant_sky_connect/translations/sv.json

@@ -20,7 +20,8 @@
             "install_addon": "Var god v\u00e4nta medan installationen av till\u00e4gget {addon_name} slutf\u00f6rs. Detta kan ta flera minuter.",
             "install_firmware": "Installerar {firmware_name} firmware. \n\nG\u00f6r inga \u00e4ndringar i maskin- eller programvara f\u00f6rr\u00e4n detta \u00e4r klart.",
             "install_otbr_addon": "Installerar till\u00e4gg",
-            "start_addon": "Var god v\u00e4nta medan {addon_name}-till\u00e4gget startar. Detta kan ta n\u00e5gra sekunder."
+            "start_addon": "Var god v\u00e4nta medan {addon_name}-till\u00e4gget startar. Detta kan ta n\u00e5gra sekunder.",
+            "start_otbr_addon": "Startar till\u00e4gg"
         },
         "step": {
             "confirm_otbr": {
@@ -49,9 +50,12 @@
                     "pick_firmware_zigbee_migrate": "Detta kommer att flytta ditt Zigbee n\u00e4tverk till den nya adaptern."
                 },
                 "menu_options": {
+                    "pick_firmware_thread": "Anv\u00e4nd som Thread-adapter",
                     "pick_firmware_thread_migrate": "Migrera Thread till en ny adapter",
+                    "pick_firmware_zigbee": "Anv\u00e4nd som Zigbee-adapter",
                     "pick_firmware_zigbee_migrate": "Migrera Zigbee till en ny adapter"
-                }
+                },
+                "title": "V\u00e4lj ditt protokoll"
             },
             "zigbee_installation_type": {
                 "description": "V\u00e4lj installationstyp f\u00f6r Zigbee-adaptern.",
@@ -78,6 +82,13 @@
             }
         }
     },
+    "entity": {
+        "switch": {
+            "beta_firmware": {
+                "name": "Betauppdateringar av firmware"
+            }
+        }
+    },
     "exceptions": {
         "device_disconnected": {
             "message": "Enheten \u00e4r inte ansluten"
@@ -106,7 +117,8 @@
             "install_addon": "Var god v\u00e4nta medan installationen av till\u00e4gget {addon_name} slutf\u00f6rs. Detta kan ta flera minuter.",
             "install_firmware": "Installerar {firmware_name} firmware. \n\nG\u00f6r inga \u00e4ndringar i maskin- eller programvara f\u00f6rr\u00e4n detta \u00e4r klart.",
             "install_otbr_addon": "Installerar till\u00e4gg",
-            "start_addon": "Var god v\u00e4nta medan {addon_name}-till\u00e4gget startar. Detta kan ta n\u00e5gra sekunder."
+            "start_addon": "Var god v\u00e4nta medan {addon_name}-till\u00e4gget startar. Detta kan ta n\u00e5gra sekunder.",
+            "start_otbr_addon": "Startar till\u00e4gg"
         },
         "step": {
             "addon_installed_other_device": {
@@ -129,7 +141,7 @@
                 "data": {
                     "channel": "Kanal"
                 },
-                "description": "Starta ett kanalbyte f\u00f6r dina Zigbee- och Thread-n\u00e4tverk.\n\nObs: detta \u00e4r en avancerad \u00e5tg\u00e4rd som kan leda till att dina Thread- och Zigbee-n\u00e4tverk inte fungerar om den nya kanalen \u00e4r \u00f6verbelastad. Beroende p\u00e5 befintliga n\u00e4tverksf\u00f6rh\u00e5llanden kanske m\u00e5nga av dina enheter inte migrerar till den nya kanalen och kommer att beh\u00f6va \u00e5teranslutas innan de b\u00f6rjar fungera igen. Anv\u00e4nd med f\u00f6rsiktighet.\n\nN\u00e4r du har valt **[%key_id:133450972%]** startar kanalbytet tyst i bakgrunden och avslutas efter n\u00e5gra minuter.",
+                "description": "Starta ett kanalbyte f\u00f6r dina Zigbee- och Thread-n\u00e4tverk.\n\nObs: detta \u00e4r en avancerad \u00e5tg\u00e4rd som kan leda till att dina Thread- och Zigbee-n\u00e4tverk inte fungerar om den nya kanalen \u00e4r \u00f6verbelastad. Beroende p\u00e5 befintliga n\u00e4tverksf\u00f6rh\u00e5llanden kanske m\u00e5nga av dina enheter inte migrerar till den nya kanalen och kommer att beh\u00f6va \u00e5teranslutas innan de b\u00f6rjar fungera igen. Anv\u00e4nd med f\u00f6rsiktighet.\n\nN\u00e4r du har valt **Bekr\u00e4fta** startar kanalbytet tyst i bakgrunden och avslutas efter n\u00e5gra minuter.",
                 "title": "Omkonfigurera st\u00f6d f\u00f6r multiprotokoll p\u00e5 IEEE 802.15.4 radio"
             },
             "confirm_otbr": {
@@ -169,9 +181,12 @@
                     "pick_firmware_zigbee_migrate": "Detta kommer att flytta ditt Zigbee n\u00e4tverk till den nya adaptern."
                 },
                 "menu_options": {
+                    "pick_firmware_thread": "Anv\u00e4nd som Thread-adapter",
                     "pick_firmware_thread_migrate": "Migrera Thread till en ny adapter",
+                    "pick_firmware_zigbee": "Anv\u00e4nd som Zigbee-adapter",
                     "pick_firmware_zigbee_migrate": "Migrera Zigbee till en ny adapter"
-                }
+                },
+                "title": "V\u00e4lj ditt protokoll"
             },
             "reconfigure_addon": {
                 "title": "Omkonfigurera st\u00f6d f\u00f6r multiprotokoll p\u00e5 IEEE 802.15.4 radio"

homeassistant/components/homeassistant_sky_connect/translations/vi.json

@@ -9,6 +9,7 @@
                 "title": "\u0110\u00e3 b\u1eaft \u0111\u1ea7u thay \u0111\u1ed5i k\u00eanh"
             },
             "notify_unknown_multipan_user": {
+                "description": "Home Assistant c\u00f3 th\u1ec3 t\u1ef1 \u0111\u1ed9ng thay \u0111\u1ed5i c\u00e1c k\u00eanh cho OTBR v\u00e0 ZHA. N\u1ebfu b\u1ea1n \u0111\u00e3 \u0111\u1ecbnh c\u1ea5u h\u00ecnh m\u1ed9t b\u1ed9 t\u00edch h\u1ee3p kh\u00e1c \u0111\u1ec3 s\u1eed d\u1ee5ng radio, v\u00ed d\u1ee5 Zigbee2MQTT, b\u1ea1n s\u1ebd ph\u1ea3i \u0111\u1ecbnh c\u1ea5u h\u00ecnh l\u1ea1i k\u00eanh trong b\u1ed9 t\u00edch h\u1ee3p \u0111\u00f3 sau khi ho\u00e0n th\u00e0nh h\u01b0\u1edbng d\u1eabn n\u00e0y.",
                 "title": "C\u00f3 th\u1ec3 c\u1ea7n c\u1ea5u h\u00ecnh th\u1ee7 c\u00f4ng"
             }
         }

homeassistant/components/homeassistant_yellow/manifest.json

@@ -7,5 +7,11 @@
   "dependencies": ["hardware", "homeassistant_hardware"],
   "documentation": "https://www.home-assistant.io/integrations/homeassistant_yellow",
   "integration_type": "hardware",
+  "loggers": [
+    "bellows",
+    "universal_silabs_flasher",
+    "zigpy.serial",
+    "serial_asyncio_fast"
+  ],
   "single_config_entry": true
 }

homeassistant/components/homeassistant_yellow/translations/pt.json

@@ -1,5 +1,10 @@
 {
     "entity": {
+        "switch": {
+            "beta_firmware": {
+                "name": "Atualiza\u00e7\u00f5es de firmware beta do r\u00e1dio"
+            }
+        },
         "update": {
             "radio_firmware": {
                 "name": "Firmware do r\u00e1dio"

homeassistant/components/homeassistant_yellow/translations/sv.json

@@ -1,5 +1,10 @@
 {
     "entity": {
+        "switch": {
+            "beta_firmware": {
+                "name": "Betauppdateringar av radions firmware"
+            }
+        },
         "update": {
             "radio_firmware": {
                 "name": "Firmware f\u00f6r radio"
@@ -19,6 +24,7 @@
             "otbr_addon_already_running": "Till\u00e4gget OpenThread-gr\u00e4nsrouter \u00e4r redan ig\u00e5ng, det kan inte installeras igen.",
             "otbr_still_using_stick": "Denna {model} anv\u00e4nds av till\u00e4gget OpenThread-gr\u00e4nsrouter. Om du anv\u00e4nder Thread-n\u00e4tverket, se till att du har alternativa gr\u00e4nsroutrar. Avinstallera till\u00e4gget och f\u00f6rs\u00f6k igen.",
             "read_hw_settings_error": "Misslyckades med att l\u00e4sa h\u00e5rdvaruinst\u00e4llningarna",
+            "unsupported_firmware": "Radions firmware p\u00e5 din {model} kunde inte fastst\u00e4llas. Se till att ingen annan integration eller till\u00e4gg f\u00f6r n\u00e4rvarande f\u00f6rs\u00f6ker kommunicera med enheten.",
             "write_hw_settings_error": "Misslyckades med att skriva h\u00e5rdvaruinst\u00e4llningar",
             "zha_migration_failed": "ZHA migreringen misslyckades",
             "zha_still_using_stick": "Denna {model} anv\u00e4nds av Zigbee Home Automation-integrationen. Migrera ditt Zigbee-n\u00e4tverk till en annan adapter eller ta bort integrationen och f\u00f6rs\u00f6k igen."
@@ -30,7 +36,8 @@
             "install_addon": "Var god v\u00e4nta medan installationen av till\u00e4gget {addon_name} slutf\u00f6rs. Detta kan ta flera minuter.",
             "install_firmware": "Installerar {firmware_name} firmware. \n\nG\u00f6r inga \u00e4ndringar i maskin- eller programvara f\u00f6rr\u00e4n detta \u00e4r klart.",
             "install_otbr_addon": "Installerar till\u00e4gg",
-            "start_addon": "Var god v\u00e4nta medan {addon_name}-till\u00e4gget startar. Detta kan ta n\u00e5gra sekunder."
+            "start_addon": "Var god v\u00e4nta medan {addon_name}-till\u00e4gget startar. Detta kan ta n\u00e5gra sekunder.",
+            "start_otbr_addon": "Startar till\u00e4gg"
         },
         "step": {
             "addon_installed_other_device": {
@@ -53,7 +60,7 @@
                 "data": {
                     "channel": "Kanal"
                 },
-                "description": "Starta ett kanalbyte f\u00f6r dina Zigbee- och Thread-n\u00e4tverk.\n\nObs: detta \u00e4r en avancerad \u00e5tg\u00e4rd som kan leda till att dina Thread- och Zigbee-n\u00e4tverk inte fungerar om den nya kanalen \u00e4r \u00f6verbelastad. Beroende p\u00e5 befintliga n\u00e4tverksf\u00f6rh\u00e5llanden kanske m\u00e5nga av dina enheter inte migrerar till den nya kanalen och kommer att beh\u00f6va \u00e5teranslutas innan de b\u00f6rjar fungera igen. Anv\u00e4nd med f\u00f6rsiktighet.\n\nN\u00e4r du har valt **[%key_id:133450972%]** startar kanalbytet tyst i bakgrunden och avslutas efter n\u00e5gra minuter.",
+                "description": "Starta ett kanalbyte f\u00f6r dina Zigbee- och Thread-n\u00e4tverk.\n\nObs: detta \u00e4r en avancerad \u00e5tg\u00e4rd som kan leda till att dina Thread- och Zigbee-n\u00e4tverk inte fungerar om den nya kanalen \u00e4r \u00f6verbelastad. Beroende p\u00e5 befintliga n\u00e4tverksf\u00f6rh\u00e5llanden kanske m\u00e5nga av dina enheter inte migrerar till den nya kanalen och kommer att beh\u00f6va \u00e5teranslutas innan de b\u00f6rjar fungera igen. Anv\u00e4nd med f\u00f6rsiktighet.\n\nN\u00e4r du har valt **Bekr\u00e4fta** startar kanalbytet tyst i bakgrunden och avslutas efter n\u00e5gra minuter.",
                 "title": "Omkonfigurera st\u00f6d f\u00f6r multiprotokoll p\u00e5 IEEE 802.15.4 radio"
             },
             "confirm_otbr": {
@@ -108,9 +115,12 @@
                     "pick_firmware_zigbee_migrate": "Detta kommer att flytta ditt Zigbee n\u00e4tverk till den nya adaptern."
                 },
                 "menu_options": {
+                    "pick_firmware_thread": "Anv\u00e4nd som Thread-adapter",
                     "pick_firmware_thread_migrate": "Migrera Thread till en ny adapter",
+                    "pick_firmware_zigbee": "Anv\u00e4nd som Zigbee-adapter",
                     "pick_firmware_zigbee_migrate": "Migrera Zigbee till en ny adapter"
-                }
+                },
+                "title": "V\u00e4lj ditt protokoll"
             },
             "reboot_menu": {
                 "description": "Inst\u00e4llningarna har \u00e4ndrats, men de nya inst\u00e4llningarna kommer inte att tr\u00e4da i kraft f\u00f6rr\u00e4n systemet har startat om",

homeassistant/components/homeassistant_yellow/translations/vi.json

@@ -9,6 +9,7 @@
                 "title": "\u0110\u00e3 b\u1eaft \u0111\u1ea7u thay \u0111\u1ed5i k\u00eanh"
             },
             "notify_unknown_multipan_user": {
+                "description": "Home Assistant c\u00f3 th\u1ec3 t\u1ef1 \u0111\u1ed9ng thay \u0111\u1ed5i c\u00e1c k\u00eanh cho OTBR v\u00e0 ZHA. N\u1ebfu b\u1ea1n \u0111\u00e3 \u0111\u1ecbnh c\u1ea5u h\u00ecnh m\u1ed9t b\u1ed9 t\u00edch h\u1ee3p kh\u00e1c \u0111\u1ec3 s\u1eed d\u1ee5ng radio, v\u00ed d\u1ee5 Zigbee2MQTT, b\u1ea1n s\u1ebd ph\u1ea3i \u0111\u1ecbnh c\u1ea5u h\u00ecnh l\u1ea1i k\u00eanh trong b\u1ed9 t\u00edch h\u1ee3p \u0111\u00f3 sau khi ho\u00e0n th\u00e0nh h\u01b0\u1edbng d\u1eabn n\u00e0y.",
                 "title": "C\u00f3 th\u1ec3 c\u1ea7n c\u1ea5u h\u00ecnh th\u1ee7 c\u00f4ng"
             },
             "reboot_menu": {

homeassistant/components/homee/translations/bg.json

@@ -115,7 +115,8 @@
             "repeater_mode": {
                 "state": {
                     "level1": "\u041d\u0438\u0432\u043e 1",
-                    "level2": "\u041d\u0438\u0432\u043e 2"
+                    "level2": "\u041d\u0438\u0432\u043e 2",
+                    "off": "\u0418\u0437\u043a\u043b\u044e\u0447\u0435\u043d\u043e"
                 }
             }
         },

homeassistant/components/homee/translations/mk.json

@@ -5,6 +5,11 @@
         }
     },
     "entity": {
+        "alarm_control_panel": {
+            "homee_mode": {
+                "name": "\u0421\u0442\u0430\u0442\u0443\u0441"
+            }
+        },
         "button": {
             "automatic_mode": {
                 "name": "\u0410\u0432\u0442\u043e\u043c\u0430\u0442\u0441\u043a\u0438 \u0440\u0435\u0436\u0438\u043c"
@@ -45,6 +50,7 @@
                 "state_attributes": {
                     "event_type": {
                         "state": {
+                            "stop": "\u0421\u0442\u043e\u043f",
                             "up": "\u0413\u043e\u0440\u0435",
                             "up_long": "\u041d\u0430\u0433\u043e\u0440\u0435 (\u0434\u043e\u043b\u0433\u043e \u043f\u0440\u0438\u0442\u0438\u0441\u043a\u0430\u045a\u0435)"
                         }
@@ -88,10 +94,20 @@
                 "name": "\u0418\u043d\u0442\u0435\u0440\u0432\u0430\u043b \u043d\u0430 \u0431\u0443\u0434\u0435\u045a\u0435"
             }
         },
+        "select": {
+            "display_temperature_selection": {
+                "state": {
+                    "target": "\u0426\u0435\u043b"
+                }
+            }
+        },
         "sensor": {
             "energy_instance": {
                 "name": "\u0415\u043d\u0435\u0440\u0433\u0438\u0458\u0430 {instance}"
             },
+            "level": {
+                "name": "\u041d\u0438\u0432\u043e"
+            },
             "position": {
                 "name": "\u041f\u043e\u0437\u0438\u0446\u0438\u0458\u0430"
             },

homeassistant/components/homee/translations/sr-Latn.json

@@ -54,7 +54,7 @@
         "select": {
             "repeater_mode": {
                 "state": {
-                    "off": "Isklju\u010den"
+                    "off": "Isklju\u010deno"
                 }
             }
         },
@@ -62,7 +62,9 @@
             "node_state": {
                 "state": {
                     "delete_in_progress": "Brisanje u toku",
-                    "password_required": "Lozinka je obavezna"
+                    "firmware_update_in_progress": "A\u017euriranje firmvera u toku",
+                    "password_required": "Lozinka je obavezna",
+                    "update_in_progress": "A\u017euriranje u toku"
                 }
             },
             "up_down": {

homeassistant/components/homekit/translations/sv.json

@@ -85,6 +85,12 @@
             "name": "\u00c5terst\u00e4ll tillbeh\u00f6r"
         },
         "unpair": {
+            "fields": {
+                "device_id": {
+                    "description": "Enhet att koppla bort.",
+                    "name": "Enhet"
+                }
+            },
             "name": "Ta bort parkopplingen f\u00f6r ett tillbeh\u00f6r eller en brygga"
         }
     }

homeassistant/components/homekit_controller/translations/mk.json

@@ -3,6 +3,7 @@
         "select": {
             "ecobee_mode": {
                 "state": {
+                    "away": "\u041d\u0430\u0434\u0432\u043e\u0440 \u043e\u0434 \u0414\u043e\u043c\u0430",
                     "home": "\u0414\u043e\u043c\u0430"
                 }
             }

homeassistant/components/homematic/translations/mk.json

@@ -0,0 +1,18 @@
+{
+    "services": {
+        "set_device_value": {
+            "fields": {
+                "value": {
+                    "name": "\u0412\u0440\u0435\u0434\u043d\u043e\u0441\u0442"
+                }
+            }
+        },
+        "set_variable_value": {
+            "fields": {
+                "value": {
+                    "name": "\u0412\u0440\u0435\u0434\u043d\u043e\u0441\u0442"
+                }
+            }
+        }
+    }
+}

homeassistant/components/homematicip_cloud/translations/mk.json

@@ -9,6 +9,13 @@
         }
     },
     "services": {
+        "activate_eco_mode_with_duration": {
+            "fields": {
+                "duration": {
+                    "name": "\u0412\u0440\u0435\u043c\u0435\u0442\u0440\u0430\u0435\u045a\u0435"
+                }
+            }
+        },
         "reset_energy_counter": {
             "description": "\u0413\u043e \u0440\u0435\u0441\u0435\u0442\u0438\u0440\u0430 \u0431\u0440\u043e\u0458\u0430\u0447\u043e\u0442 \u043d\u0430 \u0435\u043d\u0435\u0440\u0433\u0438\u0458\u0430 \u043d\u0430 \u043c\u0435\u0440\u043d\u0438\u043e\u0442 \u0435\u043d\u0442\u0438\u0442\u0435\u0442.",
             "fields": {

homeassistant/components/homematicip_cloud/translations/sv.json

@@ -22,7 +22,7 @@
                 "title": "V\u00e4lj Homematic IP accesspunkt"
             },
             "link": {
-                "description": "Tryck p\u00e5 den bl\u00e5 knappen p\u00e5 accesspunkten och p\u00e5 **[%key_id:133450972%]**-knappen f\u00f6r att registrera Homematic IP med Home Assistant. \n\n ![Placering av knappen p\u00e5 bryggan](/static/images/config_flows/config_homematicip_cloud.png)",
+                "description": "Tryck p\u00e5 den bl\u00e5 knappen p\u00e5 accesspunkten och p\u00e5 **Bekr\u00e4fta**-knappen f\u00f6r att registrera Homematic IP med Home Assistant. \n\n ![Placering av knappen p\u00e5 bryggan](/static/images/config_flows/config_homematicip_cloud.png)",
                 "title": "L\u00e4nka accesspunkt"
             }
         }

homeassistant/components/homewizard/translations/es.json

@@ -187,10 +187,12 @@
                         "title": "Autorizar"
                     },
                     "confirm": {
-                        "description": "Tu {title} ahora admite un m\u00e9todo de comunicaci\u00f3n m\u00e1s seguro y con m\u00e1s funciones. Para aprovechar esto, debes reconfigurar la integraci\u00f3n. \n \nSelecciona **Enviar** para volver a comenzar la configuraci\u00f3n."
+                        "description": "Tu {title} ahora admite un m\u00e9todo de comunicaci\u00f3n m\u00e1s seguro y con m\u00e1s funciones. Para aprovechar esto, debes reconfigurar la integraci\u00f3n. \n \nSelecciona **Enviar** para volver a comenzar la configuraci\u00f3n.",
+                        "title": "Actualizar el m\u00e9todo de autenticaci\u00f3n para {title}"
                     }
                 }
-            }
+            },
+            "title": "Actualizar el m\u00e9todo de autenticaci\u00f3n para {title}"
         }
     }
 }