homeassistant 2025.10.0b4__py3-none-any.whl → 2025.10.0b6__py3-none-any.whl

homeassistant/components/homeassistant_sky_connect/translations/en-GB.json

@@ -19,9 +19,10 @@
         "flow_title": "{model}",
         "progress": {
             "install_addon": "Please wait while the {addon_name} add-on installation finishes. This can take several minutes.",
-            "install_firmware": "Please wait while {firmware_name} firmware is installed to your {model}, this will take a few minutes. Do not make any changes to your hardware or software until this finishes.",
+            "install_firmware": "Installing {firmware_name} firmware.\n\nDo not make any changes to your hardware or software until this finishes.",
+            "install_otbr_addon": "Installing add-on",
             "start_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds.",
-            "start_otbr_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds."
+            "start_otbr_addon": "Starting add-on"
         },
         "step": {
             "confirm_otbr": {
@@ -33,8 +34,13 @@
                 "title": "Zigbee setup complete"
             },
             "install_otbr_addon": {
-                "description": "The OpenThread Border Router (OTBR) add-on is being installed.",
-                "title": "Installing OpenThread Border Router add-on"
+                "title": "Configuring Thread"
+            },
+            "install_thread_firmware": {
+                "title": "Updating adapter"
+            },
+            "install_zigbee_firmware": {
+                "title": "Updating adapter"
             },
             "otbr_failed": {
                 "description": "The OpenThread Border Router add-on installation was unsuccessful. Ensure no other software is trying to communicate with the {model}, you have access to the Internet and can install other add-ons, and try again. Check the Supervisor logs if the problem persists.",
@@ -57,8 +63,7 @@
                 "title": "Pick your protocol"
             },
             "start_otbr_addon": {
-                "description": "The OpenThread Border Router (OTBR) add-on is now starting.",
-                "title": "Starting OpenThread Border Router add-on"
+                "title": "Configuring Thread"
             },
             "zigbee_installation_type": {
                 "description": "Choose the installation type for the Zigbee adapter.",
@@ -112,9 +117,10 @@
         },
         "progress": {
             "install_addon": "Please wait while the {addon_name} add-on installation finishes. This can take several minutes.",
-            "install_firmware": "Please wait while {firmware_name} firmware is installed to your {model}, this will take a few minutes. Do not make any changes to your hardware or software until this finishes.",
+            "install_firmware": "Installing {firmware_name} firmware.\n\nDo not make any changes to your hardware or software until this finishes.",
+            "install_otbr_addon": "Installing add-on",
             "start_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds.",
-            "start_otbr_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds."
+            "start_otbr_addon": "Starting add-on"
         },
         "step": {
             "addon_installed_other_device": {
@@ -152,8 +158,13 @@
                 "title": "The Silicon Labs Multiprotocol add-on installation has started"
             },
             "install_otbr_addon": {
-                "description": "The OpenThread Border Router (OTBR) add-on is being installed.",
-                "title": "Installing OpenThread Border Router add-on"
+                "title": "Configuring Thread"
+            },
+            "install_thread_firmware": {
+                "title": "Updating adapter"
+            },
+            "install_zigbee_firmware": {
+                "title": "Updating adapter"
             },
             "notify_channel_change": {
                 "description": "A Zigbee and Thread channel change has been initiated and will finish in {delay_minutes} minutes.",
@@ -190,8 +201,7 @@
                 "title": "The Silicon Labs Multiprotocol add-on is starting."
             },
             "start_otbr_addon": {
-                "description": "The OpenThread Border Router (OTBR) add-on is now starting.",
-                "title": "Starting OpenThread Border Router add-on"
+                "title": "Configuring Thread"
             },
             "uninstall_addon": {
                 "data": {

homeassistant/components/homeassistant_sky_connect/translations/en.json

@@ -19,9 +19,10 @@
         "flow_title": "{model}",
         "progress": {
             "install_addon": "Please wait while the {addon_name} add-on installation finishes. This can take several minutes.",
-            "install_firmware": "Please wait while {firmware_name} firmware is installed to your {model}, this will take a few minutes. Do not make any changes to your hardware or software until this finishes.",
+            "install_firmware": "Installing {firmware_name} firmware.\n\nDo not make any changes to your hardware or software until this finishes.",
+            "install_otbr_addon": "Installing add-on",
             "start_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds.",
-            "start_otbr_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds."
+            "start_otbr_addon": "Starting add-on"
         },
         "step": {
             "confirm_otbr": {
@@ -33,8 +34,13 @@
                 "title": "Zigbee setup complete"
             },
             "install_otbr_addon": {
-                "description": "The OpenThread Border Router (OTBR) add-on is being installed.",
-                "title": "Installing OpenThread Border Router add-on"
+                "title": "Configuring Thread"
+            },
+            "install_thread_firmware": {
+                "title": "Updating adapter"
+            },
+            "install_zigbee_firmware": {
+                "title": "Updating adapter"
             },
             "otbr_failed": {
                 "description": "The OpenThread Border Router add-on installation was unsuccessful. Ensure no other software is trying to communicate with the {model}, you have access to the Internet and can install other add-ons, and try again. Check the Supervisor logs if the problem persists.",
@@ -57,8 +63,7 @@
                 "title": "Pick your protocol"
             },
             "start_otbr_addon": {
-                "description": "The OpenThread Border Router (OTBR) add-on is now starting.",
-                "title": "Starting OpenThread Border Router add-on"
+                "title": "Configuring Thread"
             },
             "zigbee_installation_type": {
                 "description": "Choose the installation type for the Zigbee adapter.",
@@ -112,9 +117,10 @@
         },
         "progress": {
             "install_addon": "Please wait while the {addon_name} add-on installation finishes. This can take several minutes.",
-            "install_firmware": "Please wait while {firmware_name} firmware is installed to your {model}, this will take a few minutes. Do not make any changes to your hardware or software until this finishes.",
+            "install_firmware": "Installing {firmware_name} firmware.\n\nDo not make any changes to your hardware or software until this finishes.",
+            "install_otbr_addon": "Installing add-on",
             "start_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds.",
-            "start_otbr_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds."
+            "start_otbr_addon": "Starting add-on"
         },
         "step": {
             "addon_installed_other_device": {
@@ -152,8 +158,13 @@
                 "title": "The Silicon Labs Multiprotocol add-on installation has started"
             },
             "install_otbr_addon": {
-                "description": "The OpenThread Border Router (OTBR) add-on is being installed.",
-                "title": "Installing OpenThread Border Router add-on"
+                "title": "Configuring Thread"
+            },
+            "install_thread_firmware": {
+                "title": "Updating adapter"
+            },
+            "install_zigbee_firmware": {
+                "title": "Updating adapter"
             },
             "notify_channel_change": {
                 "description": "A Zigbee and Thread channel change has been initiated and will finish in {delay_minutes} minutes.",
@@ -190,8 +201,7 @@
                 "title": "The Silicon Labs Multiprotocol add-on is starting."
             },
             "start_otbr_addon": {
-                "description": "The OpenThread Border Router (OTBR) add-on is now starting.",
-                "title": "Starting OpenThread Border Router add-on"
+                "title": "Configuring Thread"
             },
             "uninstall_addon": {
                 "data": {

homeassistant/components/homeassistant_sky_connect/translations/es.json

@@ -19,9 +19,10 @@
         "flow_title": "{model}",
         "progress": {
             "install_addon": "Por favor, espera mientras la instalaci\u00f3n del complemento {addon_name} finaliza. Puede tardar varios minutos.",
-            "install_firmware": "Por favor, espera mientras se instala el firmware {firmware_name} en tu {model}, esto tardar\u00e1 unos minutos. No realices ning\u00fan cambio en tu hardware o software hasta que esto finalice.",
+            "install_firmware": "Instalando el firmware {firmware_name}. \n \nNo realices ning\u00fan cambio en tu hardware o software hasta que esto finalice.",
+            "install_otbr_addon": "Instalando el complemento",
             "start_addon": "Por favor, espera mientras se completa el inicio del complemento {addon_name}. Puede tardar unos segundos.",
-            "start_otbr_addon": "Por favor, espera mientras se completa el inicio del complemento {addon_name}. Puede tardar unos segundos."
+            "start_otbr_addon": "Iniciando el complemento"
         },
         "step": {
             "confirm_otbr": {
@@ -33,8 +34,13 @@
                 "title": "Configuraci\u00f3n de Zigbee completa"
             },
             "install_otbr_addon": {
-                "description": "Se est\u00e1 instalando el complemento OpenThread Border Router (OTBR).",
-                "title": "Instalaci\u00f3n del complemento OpenThread Border Router"
+                "title": "Configuraci\u00f3n de Thread"
+            },
+            "install_thread_firmware": {
+                "title": "Actualizaci\u00f3n del adaptador"
+            },
+            "install_zigbee_firmware": {
+                "title": "Actualizaci\u00f3n del adaptador"
             },
             "otbr_failed": {
                 "description": "La instalaci\u00f3n del complemento OpenThread Border Router no se realiz\u00f3 correctamente. Aseg\u00farate de que ning\u00fan otro software intente comunicarse con {model}, de que tengas acceso a Internet y de que puedas instalar otros complementos, e int\u00e9ntalo de nuevo. Si el problema persiste, revisa los registros del Supervisor.",
@@ -57,8 +63,7 @@
                 "title": "Elige tu protocolo"
             },
             "start_otbr_addon": {
-                "description": "El complemento OpenThread Border Router (OTBR) se est\u00e1 iniciando ahora.",
-                "title": "Iniciando el complemento OpenThread Border Router"
+                "title": "Configuraci\u00f3n de Thread"
             },
             "zigbee_installation_type": {
                 "description": "Elige el tipo de instalaci\u00f3n para el adaptador Zigbee.",
@@ -112,9 +117,10 @@
         },
         "progress": {
             "install_addon": "Por favor, espera mientras la instalaci\u00f3n del complemento {addon_name} finaliza. Puede tardar varios minutos.",
-            "install_firmware": "Por favor, espera mientras se instala el firmware {firmware_name} en tu {model}, esto tardar\u00e1 unos minutos. No realices ning\u00fan cambio en tu hardware o software hasta que esto finalice.",
+            "install_firmware": "Instalando el firmware {firmware_name}. \n \nNo realices ning\u00fan cambio en tu hardware o software hasta que esto finalice.",
+            "install_otbr_addon": "Instalando el complemento",
             "start_addon": "Por favor, espera mientras se completa el inicio del complemento {addon_name}. Puede tardar unos segundos.",
-            "start_otbr_addon": "Por favor, espera mientras se completa el inicio del complemento {addon_name}. Puede tardar unos segundos."
+            "start_otbr_addon": "Iniciando el complemento"
         },
         "step": {
             "addon_installed_other_device": {
@@ -152,8 +158,13 @@
                 "title": "La instalaci\u00f3n del complemento Silicon Labs Multiprotocol ha comenzado"
             },
             "install_otbr_addon": {
-                "description": "Se est\u00e1 instalando el complemento OpenThread Border Router (OTBR).",
-                "title": "Instalaci\u00f3n del complemento OpenThread Border Router"
+                "title": "Configuraci\u00f3n de Thread"
+            },
+            "install_thread_firmware": {
+                "title": "Actualizaci\u00f3n del adaptador"
+            },
+            "install_zigbee_firmware": {
+                "title": "Actualizaci\u00f3n del adaptador"
             },
             "notify_channel_change": {
                 "description": "Se ha iniciado un cambio de canal Zigbee y Thread y finalizar\u00e1 en {delay_minutes} minutos.",
@@ -190,8 +201,7 @@
                 "title": "El complemento Silicon Labs Multiprotocol se est\u00e1 iniciando."
             },
             "start_otbr_addon": {
-                "description": "El complemento OpenThread Border Router (OTBR) se est\u00e1 iniciando ahora.",
-                "title": "Iniciando el complemento OpenThread Border Router"
+                "title": "Configuraci\u00f3n de Thread"
             },
             "uninstall_addon": {
                 "data": {

homeassistant/components/homeassistant_sky_connect/translations/et.json

@@ -19,9 +19,10 @@
         "flow_title": "{model}",
         "progress": {
             "install_addon": "Oota kuni lisandmooduli {addon_name} paigaldamine l\u00f5peb. Selleks v\u00f5ib kuluda mitu minutit.",
-            "install_firmware": "Oota kuni Zigbee p\u00fcsivara {firmware_name} paigaldatakse seadmesse {model}, see v\u00f5tab paar minutit. \u00c4ra tee mingeid muudatusi oma riistvaras v\u00f5i tarkvaras kuni see on l\u00f5ppenud.",
+            "install_firmware": "P\u00fcsivara {firmware_name} paigaldamine. \n \n \u00c4ra tee oma riist- ega tarkvaras mingeid muudatusi enne kui see on l\u00f5ppenud.",
+            "install_otbr_addon": "Lisandmooduli paigaldamine",
             "start_addon": "Oota kuni {addon_name} lisandmooduli k\u00e4ivitamine l\u00f5peb. Selleks v\u00f5ib kuluda m\u00f5ni sekund.",
-            "start_otbr_addon": "Oota kuni {addon_name} lisandmooduli k\u00e4ivitamine l\u00f5peb. Selleks v\u00f5ib kuluda m\u00f5ni sekund."
+            "start_otbr_addon": "Lisandmooduli k\u00e4ivitamine"
         },
         "step": {
             "confirm_otbr": {
@@ -33,8 +34,13 @@
                 "title": "Zigbee seadistamine on l\u00f5petatud"
             },
             "install_otbr_addon": {
-                "description": "Paigaldamisel on OpenThread Border Router (OTBR) lisandmoodul.",
-                "title": "OpenThread Border Routeri lisadmooduli paigaldamine"
+                "title": "Threadi h\u00e4\u00e4lestamine"
+            },
+            "install_thread_firmware": {
+                "title": "Adapteri v\u00e4rskendamine"
+            },
+            "install_zigbee_firmware": {
+                "title": "Adapteri v\u00e4rskendamine"
             },
             "otbr_failed": {
                 "description": "OpenThread Border Routeri lisaseadme paigaldamine ei \u00f5nnestunud. Veendu, et \u00fckski teine tarkvara ei p\u00fc\u00fca suhelda {model}, on juurdep\u00e4\u00e4s internetile ja te saad paigaldada teisi lisasid ning proovida uuesti. Kontrolli Supervisori logisid kui probleem p\u00fcsib.",
@@ -57,8 +63,7 @@
                 "title": "Vali protokoll"
             },
             "start_otbr_addon": {
-                "description": "OpenThread Border Router (OTBR) lisandmoodul on n\u00fc\u00fcd k\u00e4ivitumas.",
-                "title": "OpenThread Border Routeri lisandmooduli k\u00e4ivitamine"
+                "title": "Threadi h\u00e4\u00e4lestamine"
             },
             "zigbee_installation_type": {
                 "description": "Vali Zigbee adapteri paigaldust\u00fc\u00fcp.",
@@ -112,9 +117,10 @@
         },
         "progress": {
             "install_addon": "Oota kuni lisandmooduli {addon_name} paigaldamine l\u00f5peb. Selleks v\u00f5ib kuluda mitu minutit.",
-            "install_firmware": "Oota kuni Zigbee p\u00fcsivara {firmware_name} paigaldatakse seadmesse {model}, see v\u00f5tab paar minutit. \u00c4ra tee mingeid muudatusi oma riistvaras v\u00f5i tarkvaras kuni see on l\u00f5ppenud.",
+            "install_firmware": "P\u00fcsivara {firmware_name} paigaldamine. \n \n \u00c4ra tee oma riist- ega tarkvaras mingeid muudatusi enne kui see on l\u00f5ppenud.",
+            "install_otbr_addon": "Lisandmooduli paigaldamine",
             "start_addon": "Oota kuni {addon_name} lisandmooduli k\u00e4ivitamine l\u00f5peb. Selleks v\u00f5ib kuluda m\u00f5ni sekund.",
-            "start_otbr_addon": "Oota kuni {addon_name} lisandmooduli k\u00e4ivitamine l\u00f5peb. Selleks v\u00f5ib kuluda m\u00f5ni sekund."
+            "start_otbr_addon": "Lisandmooduli k\u00e4ivitamine"
         },
         "step": {
             "addon_installed_other_device": {
@@ -152,8 +158,13 @@
                 "title": "Silicon Labs Multiprotocol add-on paigaldus on alanud"
             },
             "install_otbr_addon": {
-                "description": "Paigaldamisel on OpenThread Border Router (OTBR) lisandmoodul.",
-                "title": "OpenThread Border Routeri lisadmooduli paigaldamine"
+                "title": "Threadi h\u00e4\u00e4lestamine"
+            },
+            "install_thread_firmware": {
+                "title": "Adapteri v\u00e4rskendamine"
+            },
+            "install_zigbee_firmware": {
+                "title": "Adapteri v\u00e4rskendamine"
             },
             "notify_channel_change": {
                 "description": "Zigbee ja Threadi kanalite muutmine on algatatud ja see l\u00f5peb {delay_minutes} minuti p\u00e4rast.",
@@ -190,8 +201,7 @@
                 "title": "Silicon Labs Multiprotocol lisandmoodul k\u00e4ivitub."
             },
             "start_otbr_addon": {
-                "description": "OpenThread Border Router (OTBR) lisandmoodul on n\u00fc\u00fcd k\u00e4ivitumas.",
-                "title": "OpenThread Border Routeri lisandmooduli k\u00e4ivitamine"
+                "title": "Threadi h\u00e4\u00e4lestamine"
             },
             "uninstall_addon": {
                 "data": {

homeassistant/components/homeassistant_sky_connect/translations/fi.json

@@ -12,8 +12,7 @@
         "flow_title": "{model}",
         "progress": {
             "install_addon": "Odota, kunnes {addon_name} -lis\u00e4osan asennus on valmis. T\u00e4m\u00e4 voi kest\u00e4\u00e4 useita minuutteja.",
-            "start_addon": "Odota, kunnes lis\u00e4osan {addon_name} k\u00e4ynnistys on valmis. T\u00e4m\u00e4 voi kest\u00e4\u00e4 muutaman sekunnin.",
-            "start_otbr_addon": "Odota, kunnes lis\u00e4osan {addon_name} k\u00e4ynnistys on valmis. T\u00e4m\u00e4 voi kest\u00e4\u00e4 muutaman sekunnin."
+            "start_addon": "Odota, kunnes lis\u00e4osan {addon_name} k\u00e4ynnistys on valmis. T\u00e4m\u00e4 voi kest\u00e4\u00e4 muutaman sekunnin."
         }
     },
     "options": {
@@ -31,8 +30,7 @@
         },
         "progress": {
             "install_addon": "Odota, kunnes {addon_name} -lis\u00e4osan asennus on valmis. T\u00e4m\u00e4 voi kest\u00e4\u00e4 useita minuutteja.",
-            "start_addon": "Odota, kunnes lis\u00e4osan {addon_name} k\u00e4ynnistys on valmis. T\u00e4m\u00e4 voi kest\u00e4\u00e4 muutaman sekunnin.",
-            "start_otbr_addon": "Odota, kunnes lis\u00e4osan {addon_name} k\u00e4ynnistys on valmis. T\u00e4m\u00e4 voi kest\u00e4\u00e4 muutaman sekunnin."
+            "start_addon": "Odota, kunnes lis\u00e4osan {addon_name} k\u00e4ynnistys on valmis. T\u00e4m\u00e4 voi kest\u00e4\u00e4 muutaman sekunnin."
         },
         "step": {
             "addon_installed_other_device": {

homeassistant/components/homeassistant_sky_connect/translations/fr.json

@@ -20,8 +20,8 @@
         "progress": {
             "install_addon": "Veuillez patienter pendant que l'installation du module compl\u00e9mentaire {addon_name} se termine. Cela peut prendre plusieurs minutes.",
             "install_firmware": "Veuillez patienter pendant l'installation du micrologiciel {firmware_name} sur votre {model}. Cette op\u00e9ration prendra quelques minutes. N'apportez aucune modification \u00e0 votre mat\u00e9riel ou logiciel avant la fin de l'installation.",
-            "start_addon": "Veuillez patienter pendant que le d\u00e9marrage du module compl\u00e9mentaire {addon_name} se termine. Cela peut prendre quelques secondes.",
-            "start_otbr_addon": "Veuillez patienter pendant que le d\u00e9marrage du module compl\u00e9mentaire {addon_name} se termine. Cela peut prendre quelques secondes."
+            "install_otbr_addon": "Installation du module compl\u00e9mentaire",
+            "start_addon": "Veuillez patienter pendant que le d\u00e9marrage du module compl\u00e9mentaire {addon_name} se termine. Cela peut prendre quelques secondes."
         },
         "step": {
             "confirm_otbr": {
@@ -33,9 +33,14 @@
                 "title": "Configuration du Zigbee termin\u00e9e"
             },
             "install_otbr_addon": {
-                "description": "Le module compl\u00e9mentaire OpenThread Border Router (OTBR) est en cours d'installation.",
                 "title": "Installation du module compl\u00e9mentaire OpenThread Border Router"
             },
+            "install_thread_firmware": {
+                "title": "Mise \u00e0 jour de l'adaptateur"
+            },
+            "install_zigbee_firmware": {
+                "title": "Mise \u00e0 jour de l'adaptateur"
+            },
             "otbr_failed": {
                 "description": "L\u2019installation du module compl\u00e9mentaire OpenThread Border Router a \u00e9chou\u00e9. Assurez-vous qu'aucun autre logiciel n'essaie de communiquer avec le {model}, que vous avez acc\u00e8s \u00e0 Internet et que vous pouvez installer d'autres modules compl\u00e9mentaires, puis r\u00e9essayez. V\u00e9rifiez les journaux du superviseur si le probl\u00e8me persiste.",
                 "title": "\u00c9chec de la configuration de OpenThread Border Router"
@@ -49,7 +54,6 @@
                 "title": "Choisissez votre protocole"
             },
             "start_otbr_addon": {
-                "description": "Le module compl\u00e9mentaire OpenThread Border Router (OTBR) est en cours de d\u00e9marrage.",
                 "title": "D\u00e9marrage du module compl\u00e9mentaire OpenThread Border Router"
             }
         }
@@ -82,8 +86,8 @@
         "progress": {
             "install_addon": "Veuillez patienter pendant que l'installation du module compl\u00e9mentaire {addon_name} se termine. Cela peut prendre plusieurs minutes.",
             "install_firmware": "Veuillez patienter pendant l'installation du micrologiciel {firmware_name} sur votre {model}. Cette op\u00e9ration prendra quelques minutes. N'apportez aucune modification \u00e0 votre mat\u00e9riel ou logiciel avant la fin de l'installation.",
-            "start_addon": "Veuillez patienter pendant que le d\u00e9marrage du module compl\u00e9mentaire {addon_name} se termine. Cela peut prendre quelques secondes.",
-            "start_otbr_addon": "Veuillez patienter pendant que le d\u00e9marrage du module compl\u00e9mentaire {addon_name} se termine. Cela peut prendre quelques secondes."
+            "install_otbr_addon": "Installation du module compl\u00e9mentaire",
+            "start_addon": "Veuillez patienter pendant que le d\u00e9marrage du module compl\u00e9mentaire {addon_name} se termine. Cela peut prendre quelques secondes."
         },
         "step": {
             "addon_installed_other_device": {
@@ -121,9 +125,14 @@
                 "title": "L'installation du module compl\u00e9mentaire multi-protocoles de Silicon Labs a commenc\u00e9."
             },
             "install_otbr_addon": {
-                "description": "Le module compl\u00e9mentaire OpenThread Border Router (OTBR) est en cours d'installation.",
                 "title": "Installation du module compl\u00e9mentaire OpenThread Border Router"
             },
+            "install_thread_firmware": {
+                "title": "Mise \u00e0 jour de l'adaptateur"
+            },
+            "install_zigbee_firmware": {
+                "title": "Mise \u00e0 jour de l'adaptateur"
+            },
             "notify_channel_change": {
                 "description": "Un changement de canal Zigbee et Thread a \u00e9t\u00e9 lanc\u00e9 et se terminera dans {delay_minutes}\u00a0minutes.",
                 "title": "Changement de canal initi\u00e9"
@@ -151,7 +160,6 @@
                 "title": "Le module compl\u00e9mentaire multi-protocoles de Silicon Labs d\u00e9marre."
             },
             "start_otbr_addon": {
-                "description": "Le module compl\u00e9mentaire OpenThread Border Router (OTBR) est en cours de d\u00e9marrage.",
                 "title": "D\u00e9marrage du module compl\u00e9mentaire OpenThread Border Router"
             },
             "uninstall_addon": {

homeassistant/components/homeassistant_sky_connect/translations/ga.json

@@ -20,8 +20,7 @@
         "progress": {
             "install_addon": "Fan go dt\u00ed go gcr\u00edochn\u00f3far suite\u00e1il an bhreise\u00e1in {addon_name}. F\u00e9adfaidh s\u00e9 seo roinnt n\u00f3im\u00e9ad a th\u00f3g\u00e1il.",
             "install_firmware": "Fan go dt\u00ed go suite\u00e1lfar firmware {firmware_name} ar do {model}, t\u00f3gfaidh s\u00e9 seo c\u00fapla n\u00f3im\u00e9ad. N\u00e1 d\u00e9an aon athruithe ar do chrua-earra\u00ed n\u00e1 ar do bhogearra\u00ed go dt\u00ed go mbeidh s\u00e9 seo cr\u00edochnaithe.",
-            "start_addon": "Fan go dt\u00ed go dtosa\u00edonn an breise\u00e1n {addon_name}. D\u2019fh\u00e9adfadh s\u00e9 seo roinnt soicind\u00ed a th\u00f3g\u00e1il.",
-            "start_otbr_addon": "Fan go dt\u00ed go dtosa\u00edonn an breise\u00e1n {addon_name}. D\u2019fh\u00e9adfadh s\u00e9 seo roinnt soicind\u00ed a th\u00f3g\u00e1il."
+            "start_addon": "Fan go dt\u00ed go dtosa\u00edonn an breise\u00e1n {addon_name}. D\u2019fh\u00e9adfadh s\u00e9 seo roinnt soicind\u00ed a th\u00f3g\u00e1il."
         },
         "step": {
             "confirm_otbr": {
@@ -33,7 +32,6 @@
                 "title": "Socr\u00fa Zigbee cr\u00edochnaithe"
             },
             "install_otbr_addon": {
-                "description": "T\u00e1 an breise\u00e1n OpenThread Border Router (OTBR) \u00e1 shuite\u00e1il.",
                 "title": "Ag suite\u00e1il breise\u00e1n OpenThread Border Router"
             },
             "otbr_failed": {
@@ -57,7 +55,6 @@
                 "title": "Roghnaigh do dochtearra\u00ed"
             },
             "start_otbr_addon": {
-                "description": "T\u00e1 an breise\u00e1n OpenThread Border Router (OTBR) ag tos\u00fa anois.",
                 "title": "Ag tos\u00fa breise\u00e1n OpenThread Border Router"
             },
             "zigbee_installation_type": {
@@ -113,8 +110,7 @@
         "progress": {
             "install_addon": "Fan go dt\u00ed go gcr\u00edochn\u00f3far suite\u00e1il an bhreise\u00e1in {addon_name}. F\u00e9adfaidh s\u00e9 seo roinnt n\u00f3im\u00e9ad a th\u00f3g\u00e1il.",
             "install_firmware": "Fan go dt\u00ed go suite\u00e1lfar firmware {firmware_name} ar do {model}, t\u00f3gfaidh s\u00e9 seo c\u00fapla n\u00f3im\u00e9ad. N\u00e1 d\u00e9an aon athruithe ar do chrua-earra\u00ed n\u00e1 ar do bhogearra\u00ed go dt\u00ed go mbeidh s\u00e9 seo cr\u00edochnaithe.",
-            "start_addon": "Fan go dt\u00ed go dtosa\u00edonn an breise\u00e1n {addon_name}. D\u2019fh\u00e9adfadh s\u00e9 seo roinnt soicind\u00ed a th\u00f3g\u00e1il.",
-            "start_otbr_addon": "Fan go dt\u00ed go dtosa\u00edonn an breise\u00e1n {addon_name}. D\u2019fh\u00e9adfadh s\u00e9 seo roinnt soicind\u00ed a th\u00f3g\u00e1il."
+            "start_addon": "Fan go dt\u00ed go dtosa\u00edonn an breise\u00e1n {addon_name}. D\u2019fh\u00e9adfadh s\u00e9 seo roinnt soicind\u00ed a th\u00f3g\u00e1il."
         },
         "step": {
             "addon_installed_other_device": {
@@ -152,7 +148,6 @@
                 "title": "T\u00e1 suite\u00e1il bhreise\u00e1n Ilphr\u00f3tacal Silicon Labs tosaithe"
             },
             "install_otbr_addon": {
-                "description": "T\u00e1 an breise\u00e1n OpenThread Border Router (OTBR) \u00e1 shuite\u00e1il.",
                 "title": "Ag suite\u00e1il breise\u00e1n OpenThread Border Router"
             },
             "notify_channel_change": {
@@ -190,7 +185,6 @@
                 "title": "T\u00e1 breise\u00e1n Ilphr\u00f3tacal Silicon Labs ag tos\u00fa."
             },
             "start_otbr_addon": {
-                "description": "T\u00e1 an breise\u00e1n OpenThread Border Router (OTBR) ag tos\u00fa anois.",
                 "title": "Ag tos\u00fa breise\u00e1n OpenThread Border Router"
             },
             "uninstall_addon": {

homeassistant/components/homeassistant_sky_connect/translations/he.json

@@ -20,8 +20,7 @@
         "progress": {
             "install_addon": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05e2\u05d3 \u05dc\u05e1\u05d9\u05d5\u05dd \u05d4\u05ea\u05e7\u05e0\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 {addon_name}. \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05e2\u05e9\u05d5\u05d9\u05d4 \u05dc\u05d4\u05d9\u05de\u05e9\u05da \u05de\u05e1\u05e4\u05e8 \u05d3\u05e7\u05d5\u05ea.",
             "install_firmware": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05d1\u05d6\u05de\u05df \u05d4\u05ea\u05e7\u05e0\u05ea \u05d4\u05e7\u05d5\u05e9\u05d7\u05d4 \u05e9\u05dc {firmware_name} \u05d1-{model} \u05e9\u05dc\u05da, \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05ea\u05d0\u05e8\u05da \u05de\u05e1\u05e4\u05e8 \u05d3\u05e7\u05d5\u05ea. \u05d0\u05d9\u05df \u05dc\u05d1\u05e6\u05e2 \u05e9\u05d9\u05e0\u05d5\u05d9\u05d9\u05dd \u05d1\u05d7\u05d5\u05de\u05e8\u05d4 \u05d0\u05d5 \u05d1\u05ea\u05d5\u05db\u05e0\u05d4 \u05e9\u05dc\u05da \u05e2\u05d3 \u05dc\u05e1\u05d9\u05d5\u05dd \u05d4\u05ea\u05d4\u05dc\u05d9\u05da.",
-            "start_addon": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05e2\u05d3 \u05e9\u05d4\u05ea\u05d7\u05dc\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 {addon_name} \u05ea\u05e1\u05ea\u05d9\u05d9\u05dd. \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05e2\u05e9\u05d5\u05d9\u05d4 \u05dc\u05d4\u05d9\u05de\u05e9\u05da \u05de\u05e1\u05e4\u05e8 \u05e9\u05e0\u05d9\u05d5\u05ea.",
-            "start_otbr_addon": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05e2\u05d3 \u05e9\u05d4\u05ea\u05d7\u05dc\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 {addon_name} \u05ea\u05e1\u05ea\u05d9\u05d9\u05dd. \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05e2\u05e9\u05d5\u05d9\u05d4 \u05dc\u05d4\u05d9\u05de\u05e9\u05da \u05de\u05e1\u05e4\u05e8 \u05e9\u05e0\u05d9\u05d5\u05ea."
+            "start_addon": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05e2\u05d3 \u05e9\u05d4\u05ea\u05d7\u05dc\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 {addon_name} \u05ea\u05e1\u05ea\u05d9\u05d9\u05dd. \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05e2\u05e9\u05d5\u05d9\u05d4 \u05dc\u05d4\u05d9\u05de\u05e9\u05da \u05de\u05e1\u05e4\u05e8 \u05e9\u05e0\u05d9\u05d5\u05ea."
         },
         "step": {
             "confirm_otbr": {
@@ -33,7 +32,6 @@
                 "title": "\u05d4\u05d2\u05d3\u05e8\u05ea Zigbee \u05d4\u05d5\u05e9\u05dc\u05de\u05d4"
             },
             "install_otbr_addon": {
-                "description": "\u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router (OTBR) \u05de\u05d5\u05ea\u05e7\u05e0\u05ea.",
                 "title": "\u05d4\u05ea\u05e7\u05e0\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router"
             },
             "otbr_failed": {
@@ -49,7 +47,6 @@
                 "title": "\u05d1\u05d7\u05d9\u05e8\u05ea \u05d4\u05e7\u05d5\u05e9\u05d7\u05d4 \u05e9\u05dc\u05da"
             },
             "start_otbr_addon": {
-                "description": "\u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router (OTBR) \u05de\u05ea\u05d7\u05d9\u05dc\u05d4 \u05db\u05e2\u05ea.",
                 "title": "\u05d4\u05e4\u05e2\u05dc\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router"
             }
         }
@@ -82,8 +79,7 @@
         "progress": {
             "install_addon": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05e2\u05d3 \u05dc\u05e1\u05d9\u05d5\u05dd \u05d4\u05ea\u05e7\u05e0\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 {addon_name}. \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05e2\u05e9\u05d5\u05d9\u05d4 \u05dc\u05d4\u05d9\u05de\u05e9\u05da \u05de\u05e1\u05e4\u05e8 \u05d3\u05e7\u05d5\u05ea.",
             "install_firmware": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05d1\u05d6\u05de\u05df \u05d4\u05ea\u05e7\u05e0\u05ea \u05d4\u05e7\u05d5\u05e9\u05d7\u05d4 \u05e9\u05dc {firmware_name} \u05d1-{model} \u05e9\u05dc\u05da, \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05ea\u05d0\u05e8\u05da \u05de\u05e1\u05e4\u05e8 \u05d3\u05e7\u05d5\u05ea. \u05d0\u05d9\u05df \u05dc\u05d1\u05e6\u05e2 \u05e9\u05d9\u05e0\u05d5\u05d9\u05d9\u05dd \u05d1\u05d7\u05d5\u05de\u05e8\u05d4 \u05d0\u05d5 \u05d1\u05ea\u05d5\u05db\u05e0\u05d4 \u05e9\u05dc\u05da \u05e2\u05d3 \u05dc\u05e1\u05d9\u05d5\u05dd \u05d4\u05ea\u05d4\u05dc\u05d9\u05da.",
-            "start_addon": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05e2\u05d3 \u05e9\u05d4\u05ea\u05d7\u05dc\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 {addon_name} \u05ea\u05e1\u05ea\u05d9\u05d9\u05dd. \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05e2\u05e9\u05d5\u05d9\u05d4 \u05dc\u05d4\u05d9\u05de\u05e9\u05da \u05de\u05e1\u05e4\u05e8 \u05e9\u05e0\u05d9\u05d5\u05ea.",
-            "start_otbr_addon": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05e2\u05d3 \u05e9\u05d4\u05ea\u05d7\u05dc\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 {addon_name} \u05ea\u05e1\u05ea\u05d9\u05d9\u05dd. \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05e2\u05e9\u05d5\u05d9\u05d4 \u05dc\u05d4\u05d9\u05de\u05e9\u05da \u05de\u05e1\u05e4\u05e8 \u05e9\u05e0\u05d9\u05d5\u05ea."
+            "start_addon": "\u05e0\u05d0 \u05dc\u05d4\u05de\u05ea\u05d9\u05df \u05e2\u05d3 \u05e9\u05d4\u05ea\u05d7\u05dc\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 {addon_name} \u05ea\u05e1\u05ea\u05d9\u05d9\u05dd. \u05e4\u05e2\u05d5\u05dc\u05d4 \u05d6\u05d5 \u05e2\u05e9\u05d5\u05d9\u05d4 \u05dc\u05d4\u05d9\u05de\u05e9\u05da \u05de\u05e1\u05e4\u05e8 \u05e9\u05e0\u05d9\u05d5\u05ea."
         },
         "step": {
             "addon_installed_other_device": {
@@ -121,7 +117,6 @@
                 "title": "\u05d4\u05ea\u05e7\u05e0\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 \u05e8\u05d9\u05d1\u05d5\u05d9 \u05e4\u05e8\u05d5\u05d8\u05d5\u05e7\u05d5\u05dc\u05d9\u05dd \u05e9\u05dc \u05de\u05e2\u05d1\u05d3\u05d5\u05ea \u05d4\u05e1\u05d9\u05dc\u05d9\u05e7\u05d5\u05df \u05d4\u05d7\u05dc\u05d4"
             },
             "install_otbr_addon": {
-                "description": "\u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router (OTBR) \u05de\u05d5\u05ea\u05e7\u05e0\u05ea.",
                 "title": "\u05d4\u05ea\u05e7\u05e0\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router"
             },
             "notify_channel_change": {
@@ -150,7 +145,6 @@
                 "title": "\u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 \u05e8\u05d9\u05d1\u05d5\u05d9 \u05e4\u05e8\u05d5\u05d8\u05d5\u05e7\u05d5\u05dc\u05d9\u05dd \u05e9\u05dc \u05de\u05e2\u05d1\u05d3\u05d5\u05ea \u05d4\u05e1\u05d9\u05dc\u05d9\u05e7\u05d5\u05df \u05d4\u05d7\u05dc\u05d4."
             },
             "start_otbr_addon": {
-                "description": "\u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router (OTBR) \u05de\u05ea\u05d7\u05d9\u05dc\u05d4 \u05db\u05e2\u05ea.",
                 "title": "\u05d4\u05e4\u05e2\u05dc\u05ea \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router"
             },
             "uninstall_addon": {

homeassistant/components/homeassistant_sky_connect/translations/hu.json

@@ -19,8 +19,7 @@
         "progress": {
             "install_addon": "K\u00e9rj\u00fck, v\u00e1rjon, am\u00edg a {addon_name} b\u0151v\u00edtm\u00e9ny telep\u00edt\u00e9se befejez\u0151dik. Ez t\u00f6bb percet is ig\u00e9nybe vehet.",
             "install_firmware": "V\u00e1rjon, am\u00edg a(z) {firmware_name} firmware telep\u00edt\u00e9sre ker\u00fcl a(z) {model} eszk\u00f6zre, ez n\u00e9h\u00e1ny percet vehet ig\u00e9nybe. Ne m\u00f3dos\u00edtson semmit a hardveren vagy a szoftveren, am\u00edg a folyamat be nem fejez\u0151dik.",
-            "start_addon": "K\u00e9rj\u00fck, v\u00e1rjon, am\u00edg a {addon_name} b\u0151v\u00edtm\u00e9ny ind\u00edt\u00e1sa befejez\u0151dik. Ez n\u00e9h\u00e1ny m\u00e1sodpercig eltarthat.",
-            "start_otbr_addon": "K\u00e9rj\u00fck, v\u00e1rjon, am\u00edg a {addon_name} b\u0151v\u00edtm\u00e9ny ind\u00edt\u00e1sa befejez\u0151dik. Ez n\u00e9h\u00e1ny m\u00e1sodpercig eltarthat."
+            "start_addon": "K\u00e9rj\u00fck, v\u00e1rjon, am\u00edg a {addon_name} b\u0151v\u00edtm\u00e9ny ind\u00edt\u00e1sa befejez\u0151dik. Ez n\u00e9h\u00e1ny m\u00e1sodpercig eltarthat."
         },
         "step": {
             "confirm_otbr": {
@@ -32,7 +31,6 @@
                 "title": "Zigbee be\u00e1ll\u00edt\u00e1sa befejez\u0151d\u00f6tt"
             },
             "install_otbr_addon": {
-                "description": "Az OpenThread Thread \u00fatv\u00e1laszt\u00f3 kieg\u00e9sz\u00edt\u0151 telep\u00edt\u00e9se folyamatban van.",
                 "title": "Az OpenThread Thread \u00fat\u00e1laszt\u00f3 kieg\u00e9sz\u00edt\u0151 telep\u00edt\u00e9se"
             },
             "otbr_failed": {
@@ -48,7 +46,6 @@
                 "title": "V\u00e1lassza ki a firmware-t"
             },
             "start_otbr_addon": {
-                "description": "Az OpenThread Thread \u00fatv\u00e1laszt\u00f3 kieg\u00e9sz\u00edt\u0151 most indul.",
                 "title": "Az OpenThread Thread \u00fatv\u00e1laszt\u00f3 kieg\u00e9sz\u00edt\u0151 ind\u00edt\u00e1sa"
             }
         }
@@ -80,8 +77,7 @@
         "progress": {
             "install_addon": "K\u00e9rj\u00fck, v\u00e1rjon, am\u00edg a {addon_name} b\u0151v\u00edtm\u00e9ny telep\u00edt\u00e9se befejez\u0151dik. Ez t\u00f6bb percet is ig\u00e9nybe vehet.",
             "install_firmware": "V\u00e1rjon, am\u00edg a(z) {firmware_name} firmware telep\u00edt\u00e9sre ker\u00fcl a(z) {model} eszk\u00f6zre, ez n\u00e9h\u00e1ny percet vehet ig\u00e9nybe. Ne m\u00f3dos\u00edtson semmit a hardveren vagy a szoftveren, am\u00edg a folyamat be nem fejez\u0151dik.",
-            "start_addon": "K\u00e9rj\u00fck, v\u00e1rjon, am\u00edg a {addon_name} b\u0151v\u00edtm\u00e9ny ind\u00edt\u00e1sa befejez\u0151dik. Ez n\u00e9h\u00e1ny m\u00e1sodpercig eltarthat.",
-            "start_otbr_addon": "K\u00e9rj\u00fck, v\u00e1rjon, am\u00edg a {addon_name} b\u0151v\u00edtm\u00e9ny ind\u00edt\u00e1sa befejez\u0151dik. Ez n\u00e9h\u00e1ny m\u00e1sodpercig eltarthat."
+            "start_addon": "K\u00e9rj\u00fck, v\u00e1rjon, am\u00edg a {addon_name} b\u0151v\u00edtm\u00e9ny ind\u00edt\u00e1sa befejez\u0151dik. Ez n\u00e9h\u00e1ny m\u00e1sodpercig eltarthat."
         },
         "step": {
             "addon_installed_other_device": {
@@ -119,7 +115,6 @@
                 "title": "A Silicon Labs Multiprotocol b\u0151v\u00edtm\u00e9ny telep\u00edt\u00e9se folyamatban van"
             },
             "install_otbr_addon": {
-                "description": "Az OpenThread Thread \u00fatv\u00e1laszt\u00f3 kieg\u00e9sz\u00edt\u0151 telep\u00edt\u00e9se folyamatban van.",
                 "title": "Az OpenThread Thread \u00fat\u00e1laszt\u00f3 kieg\u00e9sz\u00edt\u0151 telep\u00edt\u00e9se"
             },
             "notify_channel_change": {
@@ -149,7 +144,6 @@
                 "title": "A Silicon Labs Multiprotocol b\u0151v\u00edtm\u00e9ny elind\u00edt\u00e1sa folyamatban van"
             },
             "start_otbr_addon": {
-                "description": "Az OpenThread Thread \u00fatv\u00e1laszt\u00f3 kieg\u00e9sz\u00edt\u0151 most indul.",
                 "title": "Az OpenThread Thread \u00fatv\u00e1laszt\u00f3 kieg\u00e9sz\u00edt\u0151 ind\u00edt\u00e1sa"
             },
             "uninstall_addon": {