esphome 2025.5.2__py3-none-any.whl → 2025.6.0__py3-none-any.whl

esphome/components/honeywellabp/honeywellabp.cpp

@@ -85,8 +85,10 @@ float HONEYWELLABPSensor::get_setup_priority() const { return setup_priority::LA
 void HONEYWELLABPSensor::dump_config() {
   //  LOG_SENSOR("", "HONEYWELLABP", this);
   LOG_PIN("  CS Pin: ", this->cs_);
-  ESP_LOGCONFIG(TAG, "  Min Pressure Range: %0.1f", honeywellabp_min_pressure_);
-  ESP_LOGCONFIG(TAG, "  Max Pressure Range: %0.1f", honeywellabp_max_pressure_);
+  ESP_LOGCONFIG(TAG,
+                "  Min Pressure Range: %0.1f\n"
+                "  Max Pressure Range: %0.1f",
+                honeywellabp_min_pressure_, honeywellabp_max_pressure_);
   LOG_UPDATE_INTERVAL(this);
 }
 

esphome/components/honeywellabp2_i2c/honeywellabp2.cpp

@@ -1,6 +1,6 @@
 #include "honeywellabp2.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace honeywellabp2_i2c {
@@ -14,7 +14,7 @@ static const char *const TAG = "honeywellabp2";
 
 void HONEYWELLABP2Sensor::read_sensor_data() {
   if (this->read(raw_data_, 7) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with ABP2 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning("couldn't read sensor data");
     return;
   }
@@ -30,7 +30,7 @@ void HONEYWELLABP2Sensor::read_sensor_data() {
 
 void HONEYWELLABP2Sensor::start_measurement() {
   if (this->write(i2c_cmd_, 3) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with ABP2 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning("couldn't start measurement");
     return;
   }
@@ -39,7 +39,7 @@ void HONEYWELLABP2Sensor::start_measurement() {
 
 bool HONEYWELLABP2Sensor::is_measurement_ready() {
   if (this->read(raw_data_, 1) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with ABP2 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning("couldn't check measurement");
     return false;
   }
@@ -84,8 +84,10 @@ void HONEYWELLABP2Sensor::update() {
 }
 
 void HONEYWELLABP2Sensor::dump_config() {
-  ESP_LOGCONFIG(TAG, "  Min Pressure Range: %0.1f", this->min_pressure_);
-  ESP_LOGCONFIG(TAG, "  Max Pressure Range: %0.1f", this->max_pressure_);
+  ESP_LOGCONFIG(TAG,
+                "  Min Pressure Range: %0.1f\n"
+                "  Max Pressure Range: %0.1f",
+                this->min_pressure_, this->max_pressure_);
   if (this->transfer_function_ == ABP2_TRANS_FUNC_A) {
     ESP_LOGCONFIG(TAG, "  Transfer function A");
   } else {

esphome/components/hte501/hte501.cpp

@@ -1,4 +1,5 @@
 #include "hte501.h"
+#include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
 namespace esphome {
@@ -7,7 +8,7 @@ namespace hte501 {
 static const char *const TAG = "hte501";
 
 void HTE501Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up HTE501...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t address[] = {0x70, 0x29};
   this->write(address, 2, false);
   uint8_t identification[9];
@@ -25,7 +26,7 @@ void HTE501Component::dump_config() {
   LOG_I2C_DEVICE(this);
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with HTE501 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case CRC_CHECK_FAILED:
       ESP_LOGE(TAG, "The crc check failed");

esphome/components/http_request/__init__.py

@@ -1,6 +1,7 @@
 from esphome import automation
 import esphome.codegen as cg
 from esphome.components import esp32
+from esphome.components.const import CONF_REQUEST_HEADERS
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_ESP8266_DISABLE_SSL_SUPPORT,
@@ -10,6 +11,7 @@ from esphome.const import (
     CONF_TIMEOUT,
     CONF_TRIGGER_ID,
     CONF_URL,
+    CONF_WATCHDOG_TIMEOUT,
     PLATFORM_HOST,
     __version__,
 )
@@ -43,7 +45,6 @@ CONF_USERAGENT = "useragent"
 CONF_VERIFY_SSL = "verify_ssl"
 CONF_FOLLOW_REDIRECTS = "follow_redirects"
 CONF_REDIRECT_LIMIT = "redirect_limit"
-CONF_WATCHDOG_TIMEOUT = "watchdog_timeout"
 CONF_BUFFER_SIZE_RX = "buffer_size_rx"
 CONF_BUFFER_SIZE_TX = "buffer_size_tx"
 CONF_CA_CERTIFICATE_PATH = "ca_certificate_path"
@@ -51,7 +52,6 @@ CONF_CA_CERTIFICATE_PATH = "ca_certificate_path"
 CONF_MAX_RESPONSE_BUFFER_SIZE = "max_response_buffer_size"
 CONF_ON_RESPONSE = "on_response"
 CONF_HEADERS = "headers"
-CONF_REQUEST_HEADERS = "request_headers"
 CONF_COLLECT_HEADERS = "collect_headers"
 CONF_BODY = "body"
 CONF_JSON = "json"

esphome/components/http_request/http_request.cpp

@@ -10,11 +10,13 @@ namespace http_request {
 static const char *const TAG = "http_request";
 
 void HttpRequestComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "HTTP Request:");
-  ESP_LOGCONFIG(TAG, "  Timeout: %ums", this->timeout_);
-  ESP_LOGCONFIG(TAG, "  User-Agent: %s", this->useragent_);
-  ESP_LOGCONFIG(TAG, "  Follow redirects: %s", YESNO(this->follow_redirects_));
-  ESP_LOGCONFIG(TAG, "  Redirect limit: %d", this->redirect_limit_);
+  ESP_LOGCONFIG(TAG,
+                "HTTP Request:\n"
+                "  Timeout: %ums\n"
+                "  User-Agent: %s\n"
+                "  Follow redirects: %s\n"
+                "  Redirect limit: %d",
+                this->timeout_, this->useragent_, YESNO(this->follow_redirects_), this->redirect_limit_);
   if (this->watchdog_timeout_ > 0) {
     ESP_LOGCONFIG(TAG, "  Watchdog Timeout: %" PRIu32 "ms", this->watchdog_timeout_);
   }

esphome/components/http_request/http_request_idf.cpp

@@ -26,8 +26,10 @@ struct UserData {
 
 void HttpRequestIDF::dump_config() {
   HttpRequestComponent::dump_config();
-  ESP_LOGCONFIG(TAG, "  Buffer Size RX: %u", this->buffer_size_rx_);
-  ESP_LOGCONFIG(TAG, "  Buffer Size TX: %u", this->buffer_size_tx_);
+  ESP_LOGCONFIG(TAG,
+                "  Buffer Size RX: %u\n"
+                "  Buffer Size TX: %u",
+                this->buffer_size_rx_, this->buffer_size_tx_);
 }
 
 esp_err_t HttpRequestIDF::http_event_handler(esp_http_client_event_t *evt) {

esphome/components/http_request/ota/ota_http_request.cpp

@@ -48,7 +48,7 @@ void OtaHttpRequestComponent::flash() {
     return;
   }
 
-  ESP_LOGI(TAG, "Starting update...");
+  ESP_LOGI(TAG, "Starting update");
 #ifdef USE_OTA_STATE_CALLBACK
   this->state_callback_.call(ota::OTA_STARTED, 0.0f, 0);
 #endif

esphome/components/htu21d/htu21d.cpp

@@ -18,7 +18,7 @@ static const uint8_t HTU21D_READHEATER_REG_CMD = 0x11;  /**< Read Heater Control
 static const uint8_t HTU21D_REG_HTRE_BIT = 0x02;        /**< Control Register Heater Bit */
 
 void HTU21DComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up HTU21D...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   if (!this->write_bytes(HTU21D_REGISTER_RESET, nullptr, 0)) {
     this->mark_failed();
@@ -32,7 +32,7 @@ void HTU21DComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "HTU21D:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with HTU21D failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this->temperature_);

esphome/components/htu31d/htu31d.cpp

@@ -75,7 +75,7 @@ uint8_t compute_crc(uint32_t value) {
  * I2C.
  */
 void HTU31DComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up esphome/components/htu31d HTU31D...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   if (!this->reset_()) {
     this->mark_failed();
@@ -161,7 +161,7 @@ void HTU31DComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "HTU31D:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with HTU31D failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this->temperature_);

esphome/components/hx711/hx711.cpp

@@ -1,6 +1,6 @@
 #include "hx711.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace hx711 {
@@ -8,7 +8,7 @@ namespace hx711 {
 static const char *const TAG = "hx711";
 
 void HX711Sensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up HX711 '%s'...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   this->sck_pin_->setup();
   this->dout_pin_->setup();
   this->sck_pin_->digital_write(false);

esphome/components/hydreon_rgxx/hydreon_rgxx.cpp

@@ -18,8 +18,10 @@ void HydreonRGxxComponent::dump_config() {
     ESP_LOGE(TAG, "Connection with hydreon_rgxx failed!");
   }
   if (model_ == RG9) {
-    ESP_LOGCONFIG(TAG, "  Model: RG9");
-    ESP_LOGCONFIG(TAG, "  Disable Led: %s", TRUEFALSE(this->disable_led_));
+    ESP_LOGCONFIG(TAG,
+                  "  Model: RG9\n"
+                  "  Disable Led: %s",
+                  TRUEFALSE(this->disable_led_));
   } else {
     ESP_LOGCONFIG(TAG, "  Model: RG15");
     if (this->resolution_ == FORCE_HIGH) {
@@ -39,7 +41,7 @@ void HydreonRGxxComponent::dump_config() {
 }
 
 void HydreonRGxxComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up hydreon_rgxx...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   while (this->available() != 0) {
     this->read();
   }

esphome/components/hyt271/hyt271.cpp

@@ -21,14 +21,14 @@ void HYT271Component::update() {
 
   if (this->write(&raw_data[0], 0) != i2c::ERROR_OK) {
     this->status_set_warning();
-    ESP_LOGE(TAG, "Communication with HYT271 failed! => Ask new values");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   this->set_timeout("wait_convert", 50, [this]() {
     uint8_t raw_data[4];
     if (this->read(raw_data, 4) != i2c::ERROR_OK) {
       this->status_set_warning();
-      ESP_LOGE(TAG, "Communication with HYT271 failed! => Read values");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       return;
     }
     uint16_t raw_temperature = ((raw_data[2] << 8) | raw_data[3]) >> 2;

esphome/components/i2c/i2c_bus_arduino.cpp

@@ -1,9 +1,9 @@
 #ifdef USE_ARDUINO
 
 #include "i2c_bus_arduino.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/application.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 #include <Arduino.h>
 #include <cstring>
 
@@ -13,6 +13,7 @@ namespace i2c {
 static const char *const TAG = "i2c.arduino";
 
 void ArduinoI2CBus::setup() {
+  ESP_LOGCONFIG(TAG, "Running setup");
   recover_();
 
 #if defined(USE_ESP32)
@@ -39,7 +40,7 @@ void ArduinoI2CBus::setup() {
 
   this->initialized_ = true;
   if (this->scan_) {
-    ESP_LOGV(TAG, "Scanning i2c bus for active devices...");
+    ESP_LOGV(TAG, "Scanning bus for active devices");
     this->i2c_scan_();
   }
 }
@@ -69,9 +70,11 @@ void ArduinoI2CBus::set_pins_and_clock_() {
 
 void ArduinoI2CBus::dump_config() {
   ESP_LOGCONFIG(TAG, "I2C Bus:");
-  ESP_LOGCONFIG(TAG, "  SDA Pin: GPIO%u", this->sda_pin_);
-  ESP_LOGCONFIG(TAG, "  SCL Pin: GPIO%u", this->scl_pin_);
-  ESP_LOGCONFIG(TAG, "  Frequency: %u Hz", this->frequency_);
+  ESP_LOGCONFIG(TAG,
+                "  SDA Pin: GPIO%u\n"
+                "  SCL Pin: GPIO%u\n"
+                "  Frequency: %u Hz",
+                this->sda_pin_, this->scl_pin_, this->frequency_);
   if (timeout_ > 0) {
 #if defined(USE_ESP32)
     ESP_LOGCONFIG(TAG, "  Timeout: %u ms", this->timeout_ / 1000);
@@ -93,13 +96,13 @@ void ArduinoI2CBus::dump_config() {
       break;
   }
   if (this->scan_) {
-    ESP_LOGI(TAG, "Results from i2c bus scan:");
+    ESP_LOGI(TAG, "Results from bus scan:");
     if (scan_results_.empty()) {
-      ESP_LOGI(TAG, "Found no i2c devices!");
+      ESP_LOGI(TAG, "Found no devices");
     } else {
       for (const auto &s : scan_results_) {
         if (s.second) {
-          ESP_LOGI(TAG, "Found i2c device at address 0x%02X", s.first);
+          ESP_LOGI(TAG, "Found device at address 0x%02X", s.first);
         } else {
           ESP_LOGE(TAG, "Unknown error at address 0x%02X", s.first);
         }
@@ -215,7 +218,7 @@ ErrorCode ArduinoI2CBus::writev(uint8_t address, WriteBuffer *buffers, size_t cn
 /// https://www.nxp.com/docs/en/user-guide/UM10204.pdf
 /// https://www.analog.com/media/en/technical-documentation/application-notes/54305147357414AN686_0.pdf
 void ArduinoI2CBus::recover_() {
-  ESP_LOGI(TAG, "Performing I2C bus recovery");
+  ESP_LOGI(TAG, "Performing bus recovery");
 
   // For the upcoming operations, target for a 100kHz toggle frequency.
   // This is the maximum frequency for I2C running in standard-mode.
@@ -231,7 +234,7 @@ void ArduinoI2CBus::recover_() {
   // line. In that case, the I2C bus cannot be recovered.
   delayMicroseconds(half_period_usec);
   if (digitalRead(scl_pin_) == LOW) {  // NOLINT
-    ESP_LOGE(TAG, "Recovery failed: SCL is held LOW on the I2C bus");
+    ESP_LOGE(TAG, "Recovery failed: SCL is held LOW on the bus");
     recovery_result_ = RECOVERY_FAILED_SCL_LOW;
     return;
   }

esphome/components/i2c/i2c_bus_esp_idf.cpp

@@ -18,7 +18,7 @@ namespace i2c {
 static const char *const TAG = "i2c.idf";
 
 void IDFI2CBus::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up I2C bus...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   static i2c_port_t next_port = I2C_NUM_0;
   port_ = next_port;
 #if SOC_HP_I2C_NUM > 1
@@ -28,7 +28,7 @@ void IDFI2CBus::setup() {
 #endif
 
   if (port_ == I2C_NUM_MAX) {
-    ESP_LOGE(TAG, "Too many I2C buses configured. Max %u supported.", SOC_HP_I2C_NUM);
+    ESP_LOGE(TAG, "No more than %u buses supported", SOC_HP_I2C_NUM);
     this->mark_failed();
     return;
   }
@@ -75,15 +75,17 @@ void IDFI2CBus::setup() {
   }
   initialized_ = true;
   if (this->scan_) {
-    ESP_LOGV(TAG, "Scanning i2c bus for active devices...");
+    ESP_LOGV(TAG, "Scanning bus for active devices");
     this->i2c_scan_();
   }
 }
 void IDFI2CBus::dump_config() {
   ESP_LOGCONFIG(TAG, "I2C Bus:");
-  ESP_LOGCONFIG(TAG, "  SDA Pin: GPIO%u", this->sda_pin_);
-  ESP_LOGCONFIG(TAG, "  SCL Pin: GPIO%u", this->scl_pin_);
-  ESP_LOGCONFIG(TAG, "  Frequency: %" PRIu32 " Hz", this->frequency_);
+  ESP_LOGCONFIG(TAG,
+                "  SDA Pin: GPIO%u\n"
+                "  SCL Pin: GPIO%u\n"
+                "  Frequency: %" PRIu32 " Hz",
+                this->sda_pin_, this->scl_pin_, this->frequency_);
   if (timeout_ > 0) {
     ESP_LOGCONFIG(TAG, "  Timeout: %" PRIu32 "us", this->timeout_);
   }
@@ -99,13 +101,13 @@ void IDFI2CBus::dump_config() {
       break;
   }
   if (this->scan_) {
-    ESP_LOGI(TAG, "Results from i2c bus scan:");
+    ESP_LOGI(TAG, "Results from bus scan:");
     if (scan_results_.empty()) {
-      ESP_LOGI(TAG, "Found no i2c devices!");
+      ESP_LOGI(TAG, "Found no devices");
     } else {
       for (const auto &s : scan_results_) {
         if (s.second) {
-          ESP_LOGI(TAG, "Found i2c device at address 0x%02X", s.first);
+          ESP_LOGI(TAG, "Found device at address 0x%02X", s.first);
         } else {
           ESP_LOGE(TAG, "Unknown error at address 0x%02X", s.first);
         }
@@ -257,7 +259,7 @@ ErrorCode IDFI2CBus::writev(uint8_t address, WriteBuffer *buffers, size_t cnt, b
 /// https://www.nxp.com/docs/en/user-guide/UM10204.pdf
 /// https://www.analog.com/media/en/technical-documentation/application-notes/54305147357414AN686_0.pdf
 void IDFI2CBus::recover_() {
-  ESP_LOGI(TAG, "Performing I2C bus recovery");
+  ESP_LOGI(TAG, "Performing bus recovery");
 
   const gpio_num_t scl_pin = static_cast<gpio_num_t>(scl_pin_);
   const gpio_num_t sda_pin = static_cast<gpio_num_t>(sda_pin_);
@@ -294,7 +296,7 @@ void IDFI2CBus::recover_() {
   // with the SCL line. In that case, the I2C bus cannot be recovered.
   delayMicroseconds(half_period_usec);
   if (gpio_get_level(scl_pin) == 0) {
-    ESP_LOGE(TAG, "Recovery failed: SCL is held LOW on the I2C bus");
+    ESP_LOGE(TAG, "Recovery failed: SCL is held LOW on the bus");
     recovery_result_ = RECOVERY_FAILED_SCL_LOW;
     return;
   }

esphome/components/i2s_audio/__init__.py

@@ -4,6 +4,7 @@ from esphome.components.esp32 import get_esp32_variant
 from esphome.components.esp32.const import (
     VARIANT_ESP32,
     VARIANT_ESP32C3,
+    VARIANT_ESP32P4,
     VARIANT_ESP32S2,
     VARIANT_ESP32S3,
 )
@@ -74,6 +75,7 @@ I2S_PORTS = {
     VARIANT_ESP32S2: 1,
     VARIANT_ESP32S3: 2,
     VARIANT_ESP32C3: 1,
+    VARIANT_ESP32P4: 3,
 }
 
 i2s_channel_fmt_t = cg.global_ns.enum("i2s_channel_fmt_t")

esphome/components/i2s_audio/i2s_audio.cpp

@@ -14,18 +14,17 @@ static const uint8_t I2S_NUM_MAX = SOC_I2S_NUM;  // because IDF 5+ took this awa
 #endif
 
 void I2SAudioComponent::setup() {
-  static i2s_port_t next_port_num = I2S_NUM_0;
+  ESP_LOGCONFIG(TAG, "Running setup");
 
+  static i2s_port_t next_port_num = I2S_NUM_0;
   if (next_port_num >= I2S_NUM_MAX) {
-    ESP_LOGE(TAG, "Too many I2S Audio components!");
+    ESP_LOGE(TAG, "Too many components");
     this->mark_failed();
     return;
   }
 
   this->port_ = next_port_num;
   next_port_num = (i2s_port_t) (next_port_num + 1);
-
-  ESP_LOGCONFIG(TAG, "Setting up I2S Audio...");
 }
 
 }  // namespace i2s_audio

esphome/components/i2s_audio/i2s_audio.h

@@ -3,8 +3,8 @@
 #ifdef USE_ESP32
 
 #include "esphome/core/component.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/defines.h"
+#include "esphome/core/helpers.h"
 #ifdef USE_I2S_LEGACY
 #include <driver/i2s.h>
 #else

esphome/components/i2s_audio/media_player/__init__.py

@@ -116,5 +116,5 @@ async def to_code(config):
 
     cg.add_library("WiFiClientSecure", None)
     cg.add_library("HTTPClient", None)
-    cg.add_library("esphome/ESP32-audioI2S", "2.0.7")
+    cg.add_library("esphome/ESP32-audioI2S", "2.2.0")
     cg.add_build_flag("-DAUDIO_NO_SD_FS")

esphome/components/i2s_audio/media_player/i2s_audio_media_player.cpp

@@ -120,7 +120,7 @@ void I2SAudioMediaPlayer::set_volume_(float volume, bool publish) {
 }
 
 void I2SAudioMediaPlayer::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up Audio...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->state = media_player::MEDIA_PLAYER_STATE_IDLE;
 }
 
@@ -244,8 +244,10 @@ void I2SAudioMediaPlayer::dump_config() {
     }
   } else {
 #endif
-    ESP_LOGCONFIG(TAG, "  External DAC channels: %d", this->external_dac_channels_);
-    ESP_LOGCONFIG(TAG, "  I2S DOUT Pin: %d", this->dout_pin_);
+    ESP_LOGCONFIG(TAG,
+                  "  External DAC channels: %d\n"
+                  "  I2S DOUT Pin: %d",
+                  this->external_dac_channels_, this->dout_pin_);
     LOG_PIN("  Mute Pin: ", this->mute_pin_);
 #if SOC_I2S_SUPPORTS_DAC
   }