esphome 2025.5.2__py3-none-any.whl → 2025.6.0__py3-none-any.whl

esphome/components/dht/dht.cpp

@@ -1,6 +1,6 @@
 #include "dht.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace dht {
@@ -8,25 +8,19 @@ namespace dht {
 static const char *const TAG = "dht";
 
 void DHT::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up DHT...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->pin_->digital_write(true);
   this->pin_->setup();
   this->pin_->digital_write(true);
 }
+
 void DHT::dump_config() {
   ESP_LOGCONFIG(TAG, "DHT:");
   LOG_PIN("  Pin: ", this->pin_);
-  if (this->is_auto_detect_) {
-    ESP_LOGCONFIG(TAG, "  Auto-detected model: %s", this->model_ == DHT_MODEL_DHT11 ? "DHT11" : "DHT22");
-  } else if (this->model_ == DHT_MODEL_DHT11) {
-    ESP_LOGCONFIG(TAG, "  Model: DHT11");
-  } else {
-    ESP_LOGCONFIG(TAG, "  Model: DHT22 (or equivalent)");
-  }
-  ESP_LOGCONFIG(TAG, "  Internal Pull-up: %s", ONOFF(this->pin_->get_flags() & gpio::FLAG_PULLUP));
-
+  ESP_LOGCONFIG(TAG, "  %sModel: %s", this->is_auto_detect_ ? "Auto-detected " : "",
+                this->model_ == DHT_MODEL_DHT11 ? "DHT11" : "DHT22 or equivalent");
+  ESP_LOGCONFIG(TAG, "  Internal pull-up: %s", ONOFF(this->pin_->get_flags() & gpio::FLAG_PULLUP));
   LOG_UPDATE_INTERVAL(this);
-
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
 }
@@ -46,7 +40,7 @@ void DHT::update() {
   }
 
   if (success) {
-    ESP_LOGD(TAG, "Got Temperature=%.1f°C Humidity=%.1f%%", temperature, humidity);
+    ESP_LOGD(TAG, "Temperature %.1f°C Humidity %.1f%%", temperature, humidity);
 
     if (this->temperature_sensor_ != nullptr)
       this->temperature_sensor_->publish_state(temperature);
@@ -54,11 +48,8 @@ void DHT::update() {
       this->humidity_sensor_->publish_state(humidity);
     this->status_clear_warning();
   } else {
-    const char *str = "";
-    if (this->is_auto_detect_) {
-      str = " and consider manually specifying the DHT model using the model option";
-    }
-    ESP_LOGW(TAG, "Invalid readings! Please check your wiring (pull-up resistor, pin number)%s.", str);
+    ESP_LOGW(TAG, "Invalid readings! Check pin number and pull-up resistor%s.",
+             this->is_auto_detect_ ? " and try manually specifying the model" : "");
     if (this->temperature_sensor_ != nullptr)
       this->temperature_sensor_->publish_state(NAN);
     if (this->humidity_sensor_ != nullptr)
@@ -68,10 +59,12 @@ void DHT::update() {
 }
 
 float DHT::get_setup_priority() const { return setup_priority::DATA; }
+
 void DHT::set_dht_model(DHTModel model) {
   this->model_ = model;
   this->is_auto_detect_ = model == DHT_MODEL_AUTO_DETECT;
 }
+
 bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool report_errors) {
   *humidity = NAN;
   *temperature = NAN;
@@ -121,9 +114,9 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
       while (!this->pin_->digital_read()) {
         if (micros() - start_time > 90) {
           if (i < 0) {
-            error_code = 1;
+            error_code = 1;  // line didn't clear
           } else {
-            error_code = 2;
+            error_code = 2;  // rising edge for bit i timeout
           }
           break;
         }
@@ -139,9 +132,9 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
         end_time = micros();
         if (end_time - start_time > 90) {
           if (i < 0) {
-            error_code = 3;
+            error_code = 3;  // requesting data failed
           } else {
-            error_code = 4;
+            error_code = 4;  // falling edge for bit i timeout
           }
           break;
         }
@@ -166,22 +159,9 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
   if (!report_errors && error_code != 0)
     return false;
 
-  switch (error_code) {
-    case 1:
-      ESP_LOGW(TAG, "Waiting for DHT communication to clear failed!");
-      return false;
-    case 2:
-      ESP_LOGW(TAG, "Rising edge for bit %d failed!", i);
-      return false;
-    case 3:
-      ESP_LOGW(TAG, "Requesting data from DHT failed!");
-      return false;
-    case 4:
-      ESP_LOGW(TAG, "Falling edge for bit %d failed!", i);
-      return false;
-    case 0:
-    default:
-      break;
+  if (error_code) {
+    ESP_LOGW(TAG, ESP_LOG_MSG_COMM_FAIL);
+    return false;
   }
 
   ESP_LOGVV(TAG,
@@ -206,15 +186,15 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
     if (checksum_a == data[4]) {
       // Data format: 8bit integral RH data + 8bit decimal RH data + 8bit integral T data + 8bit decimal T data + 8bit
       // check sum - some models always have 0 in the decimal part
-      const uint16_t raw_temperature = uint16_t(data[2]) * 10 + (data[3] & 0x7F);
-      *temperature = raw_temperature / 10.0f;
+      const uint16_t raw_temperature = static_cast<uint16_t>(data[2]) * 10 + (data[3] & 0x7F);
+      *temperature = static_cast<float>(raw_temperature) / 10.0f;
       if ((data[3] & 0x80) != 0) {
         // negative
         *temperature *= -1;
       }
 
-      const uint16_t raw_humidity = uint16_t(data[0]) * 10 + data[1];
-      *humidity = raw_humidity / 10.0f;
+      const uint16_t raw_humidity = static_cast<uint16_t>(data[0]) * 10 + data[1];
+      *humidity = static_cast<float>(raw_humidity) / 10.0f;
     } else {
       // For compatibility with DHT11 models which might only use 2 bytes checksums, only use the data from these two
       // bytes
@@ -222,8 +202,8 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
       *humidity = data[0];
     }
   } else {
-    uint16_t raw_humidity = (uint16_t(data[0] & 0xFF) << 8) | (data[1] & 0xFF);
-    uint16_t raw_temperature = (uint16_t(data[2] & 0xFF) << 8) | (data[3] & 0xFF);
+    uint16_t raw_humidity = encode_uint16(data[0], data[1]);
+    uint16_t raw_temperature = encode_uint16(data[2], data[3]);
 
     if (raw_temperature & 0x8000) {
       if (!(raw_temperature & 0x4000))
@@ -234,24 +214,23 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
 
     if (raw_temperature == 1 && raw_humidity == 10) {
       if (report_errors) {
-        ESP_LOGW(TAG, "Invalid temperature+humidity! Sensor reported 1°C and 1%% Hum");
+        ESP_LOGW(TAG, "Invalid data");
       }
       return false;
     }
 
-    *humidity = raw_humidity * 0.1f;
-    if (*humidity > 100)
+    *humidity = static_cast<float>(raw_humidity) * 0.1f;
+    if (*humidity > 100.0f)
       *humidity = NAN;
-    *temperature = int16_t(raw_temperature) * 0.1f;
+    *temperature = static_cast<int16_t>(raw_temperature) * 0.1f;
   }
 
   if (*temperature == 0.0f && (*humidity == 1.0f || *humidity == 2.0f)) {
     if (report_errors) {
-      ESP_LOGW(TAG, "DHT reports invalid data. Is the update interval too high or the sensor damaged?");
+      ESP_LOGW(TAG, "Invalid data");
     }
     return false;
   }
-
   return true;
 }
 

esphome/components/dht12/dht12.cpp

@@ -34,7 +34,7 @@ void DHT12Component::update() {
   this->status_clear_warning();
 }
 void DHT12Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up DHT12...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t data[5];
   if (!this->read_data_(data)) {
     this->mark_failed();
@@ -45,7 +45,7 @@ void DHT12Component::dump_config() {
   ESP_LOGD(TAG, "DHT12:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with DHT12 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);

esphome/components/display/display.h

@@ -182,9 +182,11 @@ using display_writer_t = std::function<void(Display &)>;
 
 #define LOG_DISPLAY(prefix, type, obj) \
   if ((obj) != nullptr) { \
-    ESP_LOGCONFIG(TAG, prefix type); \
-    ESP_LOGCONFIG(TAG, "%s  Rotations: %d °", prefix, (obj)->rotation_); \
-    ESP_LOGCONFIG(TAG, "%s  Dimensions: %dpx x %dpx", prefix, (obj)->get_width(), (obj)->get_height()); \
+    ESP_LOGCONFIG(TAG, \
+                  prefix type "\n" \
+                              "%s  Rotations: %d °\n" \
+                              "%s  Dimensions: %dpx x %dpx", \
+                  prefix, (obj)->rotation_, prefix, (obj)->get_width(), (obj)->get_height()); \
   }
 
 /// Turn the pixel OFF.

esphome/components/dps310/dps310.cpp

@@ -12,7 +12,7 @@ void DPS310Component::setup() {
   auto timer = DPS310_INIT_TIMEOUT;
   uint8_t reg = 0;
 
-  ESP_LOGCONFIG(TAG, "Setting up DPS310...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   // first, reset the sensor
   if (!this->write_byte(DPS310_REG_RESET, DPS310_CMD_RESET)) {
     this->mark_failed();
@@ -86,12 +86,14 @@ void DPS310Component::setup() {
 }
 
 void DPS310Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "DPS310:");
-  ESP_LOGCONFIG(TAG, "  Product ID: %u", this->prod_rev_id_ & 0x0F);
-  ESP_LOGCONFIG(TAG, "  Revision ID: %u", (this->prod_rev_id_ >> 4) & 0x0F);
+  ESP_LOGCONFIG(TAG,
+                "DPS310:\n"
+                "  Product ID: %u\n"
+                "  Revision ID: %u",
+                this->prod_rev_id_ & 0x0F, (this->prod_rev_id_ >> 4) & 0x0F);
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with DPS310 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);

esphome/components/ds1307/ds1307.cpp

@@ -10,7 +10,7 @@ namespace ds1307 {
 static const char *const TAG = "ds1307";
 
 void DS1307Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up DS1307...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (!this->read_rtc_()) {
     this->mark_failed();
   }
@@ -22,7 +22,7 @@ void DS1307Component::dump_config() {
   ESP_LOGCONFIG(TAG, "DS1307:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with DS1307 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   ESP_LOGCONFIG(TAG, "  Timezone: '%s'", this->timezone_.c_str());
 }

esphome/components/dsmr/dsmr.cpp

@@ -278,9 +278,11 @@ bool Dsmr::parse_telegram() {
 }
 
 void Dsmr::dump_config() {
-  ESP_LOGCONFIG(TAG, "DSMR:");
-  ESP_LOGCONFIG(TAG, "  Max telegram length: %d", this->max_telegram_len_);
-  ESP_LOGCONFIG(TAG, "  Receive timeout: %.1fs", this->receive_timeout_ / 1e3f);
+  ESP_LOGCONFIG(TAG,
+                "DSMR:\n"
+                "  Max telegram length: %d\n"
+                "  Receive timeout: %.1fs",
+                this->max_telegram_len_, this->receive_timeout_ / 1e3f);
   if (this->request_pin_ != nullptr) {
     LOG_PIN("  Request Pin: ", this->request_pin_);
   }

esphome/components/duty_cycle/duty_cycle_sensor.cpp

@@ -1,6 +1,6 @@
 #include "duty_cycle_sensor.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace duty_cycle {
@@ -8,7 +8,7 @@ namespace duty_cycle {
 static const char *const TAG = "duty_cycle";
 
 void DutyCycleSensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up Duty Cycle Sensor '%s'...", this->get_name().c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->get_name().c_str());
   this->pin_->setup();
   this->store_.pin = this->pin_->to_isr();
   this->store_.last_level = this->pin_->digital_read();

esphome/components/duty_time/duty_time_sensor.cpp

@@ -94,9 +94,11 @@ void DutyTimeSensor::publish_and_save_(const uint32_t sec, const uint32_t ms) {
 }
 
 void DutyTimeSensor::dump_config() {
-  ESP_LOGCONFIG(TAG, "Duty Time:");
-  ESP_LOGCONFIG(TAG, "  Update Interval: %" PRId32 "ms", this->get_update_interval());
-  ESP_LOGCONFIG(TAG, "  Restore: %s", ONOFF(this->restore_));
+  ESP_LOGCONFIG(TAG,
+                "Duty Time:\n"
+                "  Update Interval: %" PRId32 "ms\n"
+                "  Restore: %s",
+                this->get_update_interval(), ONOFF(this->restore_));
   LOG_SENSOR("  ", "Duty Time Sensor:", this);
   LOG_SENSOR("  ", "Last Duty Time Sensor:", this->last_duty_time_sensor_);
 }

esphome/components/ee895/ee895.cpp

@@ -1,6 +1,6 @@
 #include "ee895.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace ee895 {
@@ -16,7 +16,7 @@ static const uint16_t PRESSURE_ADDRESS = 0x04B0;
 
 void EE895Component::setup() {
   uint16_t crc16_check = 0;
-  ESP_LOGCONFIG(TAG, "Setting up EE895...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   write_command_(SERIAL_NUMBER, 8);
   uint8_t serial_number[20];
   this->read(serial_number, 20);
@@ -35,7 +35,7 @@ void EE895Component::dump_config() {
   LOG_I2C_DEVICE(this);
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with EE895 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case CRC_CHECK_FAILED:
       ESP_LOGE(TAG, "The crc check failed");

esphome/components/ektf2232/touchscreen/ektf2232.cpp

@@ -16,7 +16,7 @@ static const uint8_t GET_Y_RES[4] = {0x53, 0x63, 0x00, 0x00};
 static const uint8_t GET_POWER_STATE_CMD[4] = {0x53, 0x50, 0x00, 0x01};
 
 void EKTF2232Touchscreen::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up EKT2232 Touchscreen...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->interrupt_pin_->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
   this->interrupt_pin_->setup();
 

esphome/components/emc2101/emc2101.cpp

@@ -57,7 +57,7 @@ static const uint8_t EMC2101_POLARITY_BIT = 1 << 4;
 float Emc2101Component::get_setup_priority() const { return setup_priority::HARDWARE; }
 
 void Emc2101Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up Emc2101 sensor...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   // make sure we're talking to the right chip
   uint8_t chip_id = reg(EMC2101_REGISTER_WHOAMI).get();
@@ -94,14 +94,16 @@ void Emc2101Component::dump_config() {
   ESP_LOGCONFIG(TAG, "Emc2101 component:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   ESP_LOGCONFIG(TAG, "  Mode: %s", this->dac_mode_ ? "DAC" : "PWM");
   if (this->dac_mode_) {
     ESP_LOGCONFIG(TAG, "  DAC Conversion Rate: %X", this->dac_conversion_rate_);
   } else {
-    ESP_LOGCONFIG(TAG, "  PWM Resolution: %02X", this->pwm_resolution_);
-    ESP_LOGCONFIG(TAG, "  PWM Divider: %02X", this->pwm_divider_);
+    ESP_LOGCONFIG(TAG,
+                  "  PWM Resolution: %02X\n"
+                  "  PWM Divider: %02X",
+                  this->pwm_resolution_, this->pwm_divider_);
   }
   ESP_LOGCONFIG(TAG, "  Inverted: %s", YESNO(this->inverted_));
 }
@@ -110,7 +112,7 @@ void Emc2101Component::set_duty_cycle(float value) {
   uint8_t duty_cycle = remap(value, 0.0f, 1.0f, (uint8_t) 0, this->max_output_value_);
   ESP_LOGD(TAG, "Setting duty fan setting to %02X", duty_cycle);
   if (!this->write_byte(EMC2101_REGISTER_FAN_SETTING, duty_cycle)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return;
   }
@@ -119,7 +121,7 @@ void Emc2101Component::set_duty_cycle(float value) {
 float Emc2101Component::get_duty_cycle() {
   uint8_t duty_cycle;
   if (!this->read_byte(EMC2101_REGISTER_FAN_SETTING, &duty_cycle)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return NAN;
   }
@@ -129,7 +131,7 @@ float Emc2101Component::get_duty_cycle() {
 float Emc2101Component::get_internal_temperature() {
   uint8_t temperature;
   if (!this->read_byte(EMC2101_REGISTER_INTERNAL_TEMP, &temperature)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return NAN;
   }
@@ -141,7 +143,7 @@ float Emc2101Component::get_external_temperature() {
   uint8_t lsb, msb;
   if (!this->read_byte(EMC2101_REGISTER_EXTERNAL_TEMP_MSB, &msb) ||
       !this->read_byte(EMC2101_REGISTER_EXTERNAL_TEMP_LSB, &lsb)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return NAN;
   }
@@ -155,7 +157,7 @@ float Emc2101Component::get_speed() {
   // Read **LSB** first to match 'Data Read Interlock' behavior from 6.1 of datasheet
   uint8_t lsb, msb;
   if (!this->read_byte(EMC2101_REGISTER_TACH_LSB, &lsb) || !this->read_byte(EMC2101_REGISTER_TACH_MSB, &msb)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return NAN;
   }

esphome/components/ens160_base/ens160_base.cpp

@@ -49,7 +49,7 @@ static const uint8_t ENS160_DATA_STATUS_NEWGPR = 0x01;
 static const uint8_t ENS160_DATA_AQI = 0x07;
 
 void ENS160Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up ENS160...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   // check part_id
   uint16_t part_id;
@@ -279,7 +279,7 @@ void ENS160Component::dump_config() {
 
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication failed! Is the sensor connected?");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case READ_FAILED:
       ESP_LOGE(TAG, "Error reading from register");

esphome/components/ens210/ens210.cpp

@@ -87,7 +87,7 @@ static uint32_t crc7(uint32_t value) {
 }
 
 void ENS210Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up ENS210...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t data[2];
   uint16_t part_id = 0;
   // Reset
@@ -163,7 +163,7 @@ void ENS210Component::update() {
 
     // Read T_VAL and H_VAL
     if (!this->read_bytes(ENS210_REGISTER_T_VAL, data, 6)) {
-      ESP_LOGE(TAG, "Communication with ENS210 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       this->status_set_warning();
       return;
     }

esphome/components/es7210/es7210.cpp

@@ -25,9 +25,11 @@ static const size_t MCLK_DIV_FRE = 256;
   }
 
 void ES7210::dump_config() {
-  ESP_LOGCONFIG(TAG, "ES7210 audio ADC:");
-  ESP_LOGCONFIG(TAG, "  Bits Per Sample: %" PRIu8, this->bits_per_sample_);
-  ESP_LOGCONFIG(TAG, "  Sample Rate: %" PRIu32, this->sample_rate_);
+  ESP_LOGCONFIG(TAG,
+                "ES7210 audio ADC:\n"
+                "  Bits Per Sample: %" PRIu8 "\n"
+                "  Sample Rate: %" PRIu32,
+                this->bits_per_sample_, this->sample_rate_);
 
   if (this->is_failed()) {
     ESP_LOGE(TAG, "  Failed to initialize");
@@ -36,7 +38,7 @@ void ES7210::dump_config() {
 }
 
 void ES7210::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up ES7210...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   // Software reset
   ES7210_ERROR_FAILED(this->write_byte(ES7210_RESET_REG00, 0xff));

esphome/components/es7243e/es7243e.cpp

@@ -34,7 +34,7 @@ void ES7243E::dump_config() {
 }
 
 void ES7243E::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up ES7243E...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   ES7243E_ERROR_FAILED(this->write_byte(ES7243E_CLOCK_MGR_REG01, 0x3A));
   ES7243E_ERROR_FAILED(this->write_byte(ES7243E_RESET_REG00, 0x80));

esphome/components/es8156/es8156.cpp

@@ -17,7 +17,7 @@ static const char *const TAG = "es8156";
   }
 
 void ES8156::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up ES8156...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   ES8156_ERROR_FAILED(this->write_byte(ES8156_REG02_SCLK_MODE, 0x04));
   ES8156_ERROR_FAILED(this->write_byte(ES8156_REG20_ANALOG_SYS1, 0x2A));

esphome/components/es8311/es8311.cpp

@@ -22,7 +22,7 @@ static const char *const TAG = "es8311";
   }
 
 void ES8311::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up ES8311...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   // Reset
   ES8311_ERROR_FAILED(this->write_byte(ES8311_REG00_RESET, 0x1F));
@@ -52,11 +52,13 @@ void ES8311::setup() {
 }
 
 void ES8311::dump_config() {
-  ESP_LOGCONFIG(TAG, "ES8311 Audio Codec:");
-  ESP_LOGCONFIG(TAG, "  Use MCLK: %s", YESNO(this->use_mclk_));
-  ESP_LOGCONFIG(TAG, "  Use Microphone: %s", YESNO(this->use_mic_));
-  ESP_LOGCONFIG(TAG, "  DAC Bits per Sample: %" PRIu8, this->resolution_out_);
-  ESP_LOGCONFIG(TAG, "  Sample Rate: %" PRIu32, this->sample_frequency_);
+  ESP_LOGCONFIG(TAG,
+                "ES8311 Audio Codec:\n"
+                "  Use MCLK: %s\n"
+                "  Use Microphone: %s\n"
+                "  DAC Bits per Sample: %" PRIu8 "\n"
+                "  Sample Rate: %" PRIu32,
+                YESNO(this->use_mclk_), YESNO(this->use_mic_), this->resolution_out_, this->sample_frequency_);
 
   if (this->is_failed()) {
     ESP_LOGCONFIG(TAG, "  Failed to initialize!");

esphome/components/es8388/audio_dac.py

@@ -0,0 +1,26 @@
+import esphome.codegen as cg
+from esphome.components import i2c
+from esphome.components.audio_dac import AudioDac
+import esphome.config_validation as cv
+from esphome.const import CONF_ID
+
+CODEOWNERS = ["@P4uLT"]
+CONF_ES8388_ID = "es8388_id"
+
+es8388_ns = cg.esphome_ns.namespace("es8388")
+
+ES8388 = es8388_ns.class_("ES8388", AudioDac, cg.Component, i2c.I2CDevice)
+
+DEPENDENCIES = ["i2c"]
+
+CONFIG_SCHEMA = (
+    cv.Schema({cv.GenerateID(): cv.declare_id(ES8388)})
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(i2c.i2c_device_schema(0x10))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)