dartpy 7.0.0.dev0__cp313-cp313-manylinux_2_39_x86_64.whl

include/dart/external/convhull_3d/safe_convhull_3d.h

@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2011-2025, The DART development contributors
+ * All rights reserved.
+ *
+ * The list of contributors can be found at:
+ *   https://github.com/dartsim/dart/blob/main/LICENSE
+ *
+ * This file is provided under the following "BSD-style" License:
+ *   Redistribution and use in source and binary forms, with or
+ *   without modification, are permitted provided that the following
+ *   conditions are met:
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above
+ *     copyright notice, this list of conditions and the following
+ *     disclaimer in the documentation and/or other materials provided
+ *     with the distribution.
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *   CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *   INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *   DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ *   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ *   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ *   AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ *   LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ *   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ *   POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#pragma once
+
+// Check if we are using GCC or Clang
+#ifdef __GNUC__
+  #pragma GCC system_header
+  #define CONVHULL_3D_ENABLE
+  #include <dart/external/convhull_3d/convhull_3d.h>
+
+// Check if we are using MSVC
+#elif defined(_MSC_VER)
+  #pragma warning(push, 0)
+  #define CONVHULL_3D_ENABLE
+  #include <dart/external/convhull_3d/convhull_3d.h>
+  #pragma warning(pop)
+
+// For other compilers, you might just include it normally or
+// add specific pragmas for those compilers
+#else
+  #define CONVHULL_3D_ENABLE
+  #include <dart/external/convhull_3d/convhull_3d.h>
+#endif

include/dart/external/odelcpsolver/common.h

@@ -0,0 +1,418 @@
+/*************************************************************************
+ *                                                                       *
+ * Open Dynamics Engine, Copyright (C) 2001,2002 Russell L. Smith.       *
+ * All rights reserved.  Email: russ@q12.org   Web: www.q12.org          *
+ *                                                                       *
+ * This library is free software; you can redistribute it and/or         *
+ * modify it under the terms of EITHER:                                  *
+ *   (1) The GNU Lesser General Public License as published by the Free  *
+ *       Software Foundation; either version 2.1 of the License, or (at  *
+ *       your option) any later version. The text of the GNU Lesser      *
+ *       General Public License is included with this library in the     *
+ *       file LICENSE.TXT.                                               *
+ *   (2) The BSD-style license that is included with this library in     *
+ *       the file LICENSE-BSD.TXT.                                       *
+ *                                                                       *
+ * This library is distributed in the hope that it will be useful,       *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the files    *
+ * LICENSE.TXT and LICENSE-BSD.TXT for more details.                     *
+ *                                                                       *
+ *************************************************************************/
+
+#ifndef _ODE_COMMON_H_
+#define _ODE_COMMON_H_
+
+#include <math.h>
+
+#include "dart/external/odelcpsolver/odeconfig.h"
+#include "dart/external/odelcpsolver/error.h"
+
+#define PURE_INLINE static __inline
+
+
+/* configuration stuff */
+
+/* constants */
+
+/* pi and 1/sqrt(2) are defined here if necessary because they don't get
+ * defined in <math.h> on some platforms (like MS-Windows)
+ */
+
+#ifndef M_PI
+#define M_PI REAL(3.1415926535897932384626433832795029)
+#endif
+#ifndef M_SQRT1_2
+#define M_SQRT1_2 REAL(0.7071067811865475244008443621048490)
+#endif
+
+
+/* debugging:
+ *   IASSERT  is an internal assertion, i.e. a consistency check. if it fails
+ *            we want to know where.
+ *   UASSERT  is a user assertion, i.e. if it fails a nice error message
+ *            should be printed for the user.
+ *   AASSERT  is an arguments assertion, i.e. if it fails "bad argument(s)"
+ *            is printed.
+ *   DEBUGMSG just prints out a message
+ */
+
+#  if defined(__STDC__) && __STDC_VERSION__ >= 199901L
+#    define __FUNCTION__ __func__
+#  endif
+#ifndef dNODEBUG
+#  ifdef __GNUC__
+#    define dIASSERT(a) { if (!(a)) { dDebug (d_ERR_IASSERT, \
+      "assertion \"" #a "\" failed in %s() [%s:%u]",__FUNCTION__,__FILE__,__LINE__); } }
+#    define dUASSERT(a,msg) { if (!(a)) { dDebug (d_ERR_UASSERT, \
+      msg " in %s()", __FUNCTION__); } }
+#    define dDEBUGMSG(msg) { dMessage (d_ERR_UASSERT,				\
+  msg " in %s() [%s:%u]", __FUNCTION__,__FILE__,__LINE__); }
+#  else // not __GNUC__
+#    define dIASSERT(a) { if (!(a)) { dDebug (d_ERR_IASSERT, \
+      "assertion \"" #a "\" failed in %s:%u",__FILE__,__LINE__); } }
+#    define dUASSERT(a,msg) { if (!(a)) { dDebug (d_ERR_UASSERT, \
+      msg " (%s:%u)", __FILE__,__LINE__); } }
+#    define dDEBUGMSG(msg) { dMessage (d_ERR_UASSERT, \
+      msg " (%s:%u)", __FILE__,__LINE__); }
+#  endif
+#  define dIVERIFY(a) dIASSERT(a)
+#else
+#  define dIASSERT(a) ((void)0)
+#  define dUASSERT(a,msg) ((void)0)
+#  define dDEBUGMSG(msg) ((void)0)
+#  define dIVERIFY(a) ((void)(a))
+#endif
+
+#  ifdef __GNUC__
+#    define dICHECK(a) { if (!(a)) { dDebug (d_ERR_IASSERT, \
+      "assertion \"" #a "\" failed in %s() [%s:%u]",__FUNCTION__,__FILE__,__LINE__); *(int *)0 = 0; } }
+#  else // not __GNUC__
+#    define dICHECK(a) { if (!(a)) { dDebug (d_ERR_IASSERT, \
+      "assertion \"" #a "\" failed in %s:%u",__FILE__,__LINE__); *(int *)0 = 0; } }
+#  endif
+
+// Argument assert is a special case of user assert
+#define dAASSERT(a) dUASSERT(a,"Bad argument(s)")
+
+/* floating point data type, vector, matrix and quaternion types */
+
+#define dDOUBLE 1
+
+namespace dart {
+namespace external {
+namespace ode {
+
+#if defined(dSINGLE)
+typedef float dReal;
+#ifdef dDOUBLE
+#error You can only #define dSINGLE or dDOUBLE, not both.
+#endif // dDOUBLE
+#elif defined(dDOUBLE)
+typedef double dReal;
+#else
+#error You must #define dSINGLE or dDOUBLE
+#endif
+
+// Detect if we've got both trimesh engines enabled.
+#if dTRIMESH_ENABLED
+#if dTRIMESH_OPCODE && dTRIMESH_GIMPACT
+#error You can only #define dTRIMESH_OPCODE or dTRIMESH_GIMPACT, not both.
+#endif
+#endif // dTRIMESH_ENABLED
+
+// Define a type for indices, either 16 or 32 bit, based on build option
+// TODO: Currently GIMPACT only supports 32 bit indices.
+
+#if dTRIMESH_16BIT_INDICES
+#if dTRIMESH_GIMPACT
+typedef uint32 dTriIndex;
+#else // dTRIMESH_GIMPACT
+typedef uint16 dTriIndex;
+#endif // dTRIMESH_GIMPACT
+#else // dTRIMESH_16BIT_INDICES
+typedef unsigned int dTriIndex;
+#endif // dTRIMESH_16BIT_INDICES
+
+/* round an integer up to a multiple of 4, except that 0 and 1 are unmodified
+ * (used to compute matrix leading dimensions)
+ */
+#define dPAD(a) (((a) > 1) ? ((((a)-1)|3)+1) : (a))
+
+/* these types are mainly just used in headers */
+typedef dReal dVector3[4];
+typedef dReal dVector4[4];
+typedef dReal dMatrix3[4*3];
+typedef dReal dMatrix4[4*4];
+typedef dReal dMatrix6[8*6];
+typedef dReal dQuaternion[4];
+
+
+/* precision dependent scalar math functions */
+
+#if defined(dSINGLE)
+
+#define REAL(x) (x ## f)					/* form a constant */
+#define dRecip(x) ((1.0f/(x)))				/* reciprocal */
+#define dSqrt(x) (sqrtf(x))			/* square root */
+#define dRecipSqrt(x) ((1.0f/sqrtf(x)))		/* reciprocal square root */
+#define dSin(x) (sinf(x))				/* sine */
+#define dCos(x) (cosf(x))				/* cosine */
+#define dFabs(x) (fabsf(x))			/* absolute value */
+#define dAtan2(y,x) (atan2f(y,x))		/* arc tangent with 2 args */
+#define dFMod(a,b) (fmodf(a,b))		/* modulo */
+#define dFloor(x) floorf(x)			/* floor */
+#define dCeil(x) ceilf(x)			/* floor */
+#define dCopySign(a,b) ((dReal)copysignf(a,b)) /* copy value sign */
+#define dNextAfter(x, y) nextafterf(x, y) /* next value after */
+
+#ifdef HAVE___ISNANF
+#define dIsNan(x) (__isnanf(x))
+#elif defined(HAVE__ISNANF)
+#define dIsNan(x) (_isnanf(x))
+#elif defined(HAVE_ISNANF)
+#define dIsNan(x) (isnanf(x))
+#else
+  /*
+     fall back to _isnan which is the VC way,
+     this may seem redundant since we already checked
+     for _isnan before, but if isnan is detected by
+     configure but is not found during compilation
+     we should always make sure we check for __isnanf,
+     _isnanf and isnanf in that order before falling
+     back to a default
+  */
+#define dIsNan(x) (_isnan(x))
+#endif
+
+#elif defined(dDOUBLE)
+
+#define REAL(x) (x)
+#define dRecip(x) (1.0/(x))
+#define dSqrt(x) sqrt(x)
+#define dRecipSqrt(x) (1.0/sqrt(x))
+#define dSin(x) sin(x)
+#define dCos(x) cos(x)
+#define dFabs(x) fabs(x)
+#define dAtan2(y,x) atan2((y),(x))
+#define dFMod(a,b) (fmod((a),(b)))
+#define dFloor(x) floor(x)
+#define dCeil(x) ceil(x)
+#define dCopySign(a,b) (copysign((a),(b)))
+#define dNextAfter(x, y) nextafter(x, y)
+
+#ifdef HAVE___ISNAN
+#define dIsNan(x) (__isnan(x))
+#elif defined(HAVE__ISNAN)
+#define dIsNan(x) (_isnan(x))
+#elif defined(HAVE_ISNAN)
+#define dIsNan(x) (isnan(x))
+#else
+#define dIsNan(x) (_isnan(x))
+#endif
+
+#else
+#error You must #define dSINGLE or dDOUBLE
+#endif
+
+/* internal object types (all prefixed with `dx') */
+
+struct dxWorld;		/* dynamics world */
+struct dxSpace;		/* collision space */
+struct dxBody;		/* rigid body (dynamics object) */
+struct dxGeom;		/* geometry (collision object) */
+struct dxJoint;
+struct dxJointNode;
+struct dxJointGroup;
+struct dxWorldProcessThreadingManager;
+
+typedef struct dxWorld *dWorldID;
+typedef struct dxSpace *dSpaceID;
+typedef struct dxBody *dBodyID;
+typedef struct dxGeom *dGeomID;
+typedef struct dxJoint *dJointID;
+typedef struct dxJointGroup *dJointGroupID;
+typedef struct dxWorldProcessThreadingManager *dWorldStepThreadingManagerID;
+
+/* error numbers */
+
+enum {
+  d_ERR_UNKNOWN = 0,		/* unknown error */
+  d_ERR_IASSERT,		/* internal assertion failed */
+  d_ERR_UASSERT,		/* user assertion failed */
+  d_ERR_LCP			/* user assertion failed */
+};
+
+
+/* joint type numbers */
+
+typedef enum {
+  dJointTypeNone = 0,		/* or "unknown" */
+  dJointTypeBall,
+  dJointTypeHinge,
+  dJointTypeSlider,
+  dJointTypeContact,
+  dJointTypeUniversal,
+  dJointTypeHinge2,
+  dJointTypeFixed,
+  dJointTypeNull,
+  dJointTypeAMotor,
+  dJointTypeLMotor,
+  dJointTypePlane2D,
+  dJointTypePR,
+  dJointTypePU,
+  dJointTypePiston
+} dJointType;
+
+
+/* an alternative way of setting joint parameters, using joint parameter
+ * structures and member constants. we don't actually do this yet.
+ */
+
+/*
+typedef struct dLimot {
+  int mode;
+  dReal lostop, histop;
+  dReal vel, fmax;
+  dReal fudge_factor;
+  dReal bounce, soft;
+  dReal suspension_erp, suspension_cfm;
+} dLimot;
+
+enum {
+  dLimotLoStop		= 0x0001,
+  dLimotHiStop		= 0x0002,
+  dLimotVel		= 0x0004,
+  dLimotFMax		= 0x0008,
+  dLimotFudgeFactor	= 0x0010,
+  dLimotBounce		= 0x0020,
+  dLimotSoft		= 0x0040
+};
+*/
+
+
+/* standard joint parameter names. why are these here? - because we don't want
+ * to include all the joint function definitions in joint.cpp. hmmmm.
+ * MSVC complains if we call D_ALL_PARAM_NAMES_X with a blank second argument,
+ * which is why we have the D_ALL_PARAM_NAMES macro as well. please copy and
+ * paste between these two.
+ */
+
+#define D_ALL_PARAM_NAMES(start) \
+  /* parameters for limits and motors */ \
+  dParamLoStop = start, \
+  dParamHiStop, \
+  dParamVel, \
+  dParamFMax, \
+  dParamFudgeFactor, \
+  dParamBounce, \
+  dParamCFM, \
+  dParamStopERP, \
+  dParamStopCFM, \
+  /* parameters for suspension */ \
+  dParamSuspensionERP, \
+  dParamSuspensionCFM, \
+  dParamERP, \
+
+  //////////////////////////////////////////////////////////////////////////////
+  /// \enum  D_ALL_PARAM_NAMES_X
+  ///
+  /// \var dParamGroup This is the starting value of the different group
+  ///                  (i.e. dParamGroup1, dParamGroup2, dParamGroup3)
+  ///                  It also helps in the use of parameter
+  ///                  (dParamGroup2 | dParamFMax) == dParamFMax2
+  //////////////////////////////////////////////////////////////////////////////
+#define D_ALL_PARAM_NAMES_X(start,x) \
+  dParamGroup ## x = start, \
+  /* parameters for limits and motors */ \
+  dParamLoStop ## x = start, \
+  dParamHiStop ## x, \
+  dParamVel ## x, \
+  dParamFMax ## x, \
+  dParamFudgeFactor ## x, \
+  dParamBounce ## x, \
+  dParamCFM ## x, \
+  dParamStopERP ## x, \
+  dParamStopCFM ## x, \
+  /* parameters for suspension */ \
+  dParamSuspensionERP ## x, \
+  dParamSuspensionCFM ## x, \
+  dParamERP ## x,
+
+enum {
+  D_ALL_PARAM_NAMES(0)
+  dParamsInGroup,     ///< Number of parameter in a group
+  D_ALL_PARAM_NAMES_X(0x000,1)
+  D_ALL_PARAM_NAMES_X(0x100,2)
+  D_ALL_PARAM_NAMES_X(0x200,3)
+
+  /* add a multiple of this constant to the basic parameter numbers to get
+   * the parameters for the second, third etc axes.
+   */
+  dParamGroup=0x100
+};
+
+
+/* angular motor mode numbers */
+
+enum {
+  dAMotorUser = 0,
+  dAMotorEuler = 1
+};
+
+
+/* joint force feedback information */
+
+typedef struct dJointFeedback {
+  dVector3 f1;		/* force applied to body 1 */
+  dVector3 t1;		/* torque applied to body 1 */
+  dVector3 f2;		/* force applied to body 2 */
+  dVector3 t2;		/* torque applied to body 2 */
+} dJointFeedback;
+
+
+/* private functions that must be implemented by the collision library:
+ * (1) indicate that a geom has moved, (2) get the next geom in a body list.
+ * these functions are called whenever the position of geoms connected to a
+ * body have changed, e.g. with dBodySetPosition(), dBodySetRotation(), or
+ * when the ODE step function updates the body state.
+ */
+
+void dGeomMoved (dGeomID);
+dGeomID dGeomGetBodyNext (dGeomID);
+
+/**
+ * dGetConfiguration returns the specific ODE build configuration as
+ * a string of tokens. The string can be parsed in a similar way to
+ * the OpenGL extension mechanism, the naming convention should be
+ * familiar too. The following extensions are reported:
+ *
+ * ODE
+ * ODE_single_precision
+ * ODE_double_precision
+ * ODE_EXT_no_debug
+ * ODE_EXT_trimesh
+ * ODE_EXT_opcode
+ * ODE_EXT_gimpact
+ * ODE_EXT_malloc_not_alloca
+ * ODE_EXT_gyroscopic
+ * ODE_OPC_16bit_indices
+ * ODE_OPC_new_collider
+*/
+ODE_API const char* dGetConfiguration (void);
+
+/**
+ * Helper to check for a token in the ODE configuration string.
+ * Caution, this function is case sensitive.
+ *
+ * @param token A configuration token, see dGetConfiguration for details
+ *
+ * @return 1 if exact token is present, 0 if not present
+ */
+ODE_API int dCheckConfiguration( const char* token );
+
+} // namespace ode
+} // namespace external
+} // namespace dart
+
+#endif

include/dart/external/odelcpsolver/error.h

@@ -0,0 +1,62 @@
+/*************************************************************************
+ *                                                                       *
+ * Open Dynamics Engine, Copyright (C) 2001,2002 Russell L. Smith.       *
+ * All rights reserved.  Email: russ@q12.org   Web: www.q12.org          *
+ *                                                                       *
+ * This library is free software; you can redistribute it and/or         *
+ * modify it under the terms of EITHER:                                  *
+ *   (1) The GNU Lesser General Public License as published by the Free  *
+ *       Software Foundation; either version 2.1 of the License, or (at  *
+ *       your option) any later version. The text of the GNU Lesser      *
+ *       General Public License is included with this library in the     *
+ *       file LICENSE.TXT.                                               *
+ *   (2) The BSD-style license that is included with this library in     *
+ *       the file LICENSE-BSD.TXT.                                       *
+ *                                                                       *
+ * This library is distributed in the hope that it will be useful,       *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the files    *
+ * LICENSE.TXT and LICENSE-BSD.TXT for more details.                     *
+ *                                                                       *
+ *************************************************************************/
+
+/* this comes from the `reuse' library. copy any changes back to the source */
+
+#ifndef _ODE_ERROR_H_
+#define _ODE_ERROR_H_
+
+#include "dart/external/odelcpsolver/odeconfig.h"
+
+namespace dart {
+namespace external {
+namespace ode {
+
+/* all user defined error functions have this type. error and debug functions
+ * should not return.
+ */
+typedef void dMessageFunction (int errnum, const char *msg, va_list ap);
+
+/* set a new error, debug or warning handler. if fn is 0, the default handlers
+ * are used.
+ */
+ODE_API void dSetErrorHandler (dMessageFunction *fn);
+ODE_API void dSetDebugHandler (dMessageFunction *fn);
+ODE_API void dSetMessageHandler (dMessageFunction *fn);
+
+/* return the current error, debug or warning handler. if the return value is
+ * 0, the default handlers are in place.
+ */
+ODE_API dMessageFunction *dGetErrorHandler(void);
+ODE_API dMessageFunction *dGetDebugHandler(void);
+ODE_API dMessageFunction *dGetMessageHandler(void);
+
+/* generate a fatal error, debug trap or a message. */
+ODE_API void dError (int num, const char *msg, ...);
+ODE_API void dDebug (int num, const char *msg, ...);
+ODE_API void dMessage (int num, const char *msg, ...);
+
+} // namespace ode
+} // namespace external
+} // namespace dart
+
+#endif

include/dart/external/odelcpsolver/lcp.h

@@ -0,0 +1,75 @@
+/*************************************************************************
+ *                                                                       *
+ * Open Dynamics Engine, Copyright (C) 2001,2002 Russell L. Smith.       *
+ * All rights reserved.  Email: russ@q12.org   Web: www.q12.org          *
+ *                                                                       *
+ * This library is free software; you can redistribute it and/or         *
+ * modify it under the terms of EITHER:                                  *
+ *   (1) The GNU Lesser General Public License as published by the Free  *
+ *       Software Foundation; either version 2.1 of the License, or (at  *
+ *       your option) any later version. The text of the GNU Lesser      *
+ *       General Public License is included with this library in the     *
+ *       file LICENSE.TXT.                                               *
+ *   (2) The BSD-style license that is included with this library in     *
+ *       the file LICENSE-BSD.TXT.                                       *
+ *                                                                       *
+ * This library is distributed in the hope that it will be useful,       *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the files    *
+ * LICENSE.TXT and LICENSE-BSD.TXT for more details.                     *
+ *                                                                       *
+ *************************************************************************/
+
+/*
+
+given (A,b,lo,hi), solve the LCP problem: A*x = b+w, where each x(i),w(i)
+satisfies one of
+	(1) x = lo, w >= 0
+	(2) x = hi, w <= 0
+	(3) lo < x < hi, w = 0
+A is a matrix of dimension n*n, everything else is a vector of size n*1.
+lo and hi can be +/- dInfinity as needed. the first `nub' variables are
+unbounded, i.e. hi and lo are assumed to be +/- dInfinity.
+
+we restrict lo(i) <= 0 and hi(i) >= 0.
+
+the original data (A,b) may be modified by this function.
+
+if the `findex' (friction index) parameter is nonzero, it points to an array
+of index values. in this case constraints that have findex[i] >= 0 are
+special. all non-special constraints are solved for, then the lo and hi values
+for the special constraints are set:
+  hi[i] = abs( hi[i] * x[findex[i]] )
+  lo[i] = -hi[i]
+and the solution continues. this mechanism allows a friction approximation
+to be implemented. the first `nub' variables are assumed to have findex < 0.
+
+*/
+
+
+#ifndef _ODE_LCP_H_
+#define _ODE_LCP_H_
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <cassert>
+
+#include "dart/external/odelcpsolver/odeconfig.h"
+#include "dart/external/odelcpsolver/common.h"
+
+namespace dart {
+namespace external {
+namespace ode {
+
+bool dSolveLCP (int n, dReal *A, dReal *x, dReal *b, dReal *w,
+  int nub, dReal *lo, dReal *hi, int *findex, bool earlyTermination = false);
+
+size_t dEstimateSolveLCPMemoryReq(int n, bool outer_w_avail);
+
+ODE_API int dTestSolveLCP();
+
+} // namespace ode
+} // namespace external
+} // namespace dart
+
+#endif