cgse 2024.7.0__py3-none-any.whl → 2025.0.1__py3-none-any.whl

egse/vacuum/mks/evision_ui.py

@@ -1,701 +0,0 @@
-
-import argparse
-import logging
-import pickle
-from datetime import datetime
-
-import numpy as np
-import sys
-import zmq
-from PyQt5.QtCore import QThread, QObject, pyqtSignal, pyqtSlot
-from PyQt5.QtWidgets import QMainWindow, QApplication, QWidget, QVBoxLayout, QSizePolicy, QGridLayout, QGroupBox, \
-    QLabel, QFormLayout, \
-    QHBoxLayout, QComboBox, QSpinBox, QPushButton, \
-    QSpacerItem, QCheckBox
-from matplotlib.backends.backend_qt5agg import FigureCanvasQTAgg as Canvas
-from matplotlib.figure import Figure
-
-from egse.observer import Observer, Observable
-from egse.vacuum.mks.evision import CTRL_SETTINGS
-from egse.vacuum.mks.evision import EvisionProxy, EvisionSimulator
-from egse.zmq_ser import connect_address
-
-logger = logging.getLogger(__name__)
-
-class RGAMonitoringWorker(QObject):
-
-    rga_new_data_signal         = pyqtSignal(list)
-    rga_new_info_signal         = pyqtSignal(dict)
-    rga_new_filament_signal     = pyqtSignal(dict)
-    rga_new_scan_status_signal  = pyqtSignal(dict)
-    rga_new_running_signal      = pyqtSignal(bool)
-    
-    def __init__(self):
-        """ Initialisation of a monitoring worker.
-        
-        This worker keeps an eye on the monitoring port of the Beaglebone rga. When a change in
-            Relevant information occurs, a signalw ill be emitted. These signals will be used to update the GUI
-        """
-        
-        
-        super(RGAMonitoringWorker, self).__init__()
-        
-        self.active = False
-        self.just_reconnected = True
-        
-        self.monitoring_socket = None
-        self.is_socket_connected = True
-        self.monitoring_timeout = 0.5
-        
-        self.connect_socket()
-        
-        # Keep track of the rga status, so we only have to send a signal when the state has changed
-        
-        self.previous_rga_data      = {}
-        self.previous_rga_info      = {}
-        self.previous_filament_info = {}
-        self.previous_scan_reading  = {}
-        self.previous_running       = None
-        
-    def connect_socket(self):
-        """ Create a socket and connect to the monitoring port.
-        """
-        
-
-        try:
-            transport   = CTRL_SETTINGS.PROTOCOL
-            hostname    = CTRL_SETTINGS.HOSTNAME
-            
-            monitoring_port = CTRL_SETTINGS.MONITORING_PORT
-            monitoring_address = connect_address(transport, hostname, monitoring_port)
-            
-            self.monitoring_socket = zmq.Context().socket(zmq.SUB)
-            self.monitoring_socket.connect(monitoring_address)
-            self.monitoring_socket.setsockopt_string(zmq.SUBSCRIBE, "")
-            
-            self.monitoring_timeout = 0.5
-            
-            self.is_socket_connected = True
-            
-        except:
-            self.is_socket_connected = False
-            
-    def stop(self):
-        
-        """ Stop the monitoring worker.
-
-        The monitoring socket is disconnected from the monitoring port and is then closed immediately.
-        """
-        
-        self.monitoring_socket.close()
-        self.is_socket_connected = False
-        
-        self.active = False
-        
-    def start_process(self):
-        """Start updated the Beaglebone status"""
-        self.run()
-        
-    @pyqtSlot()
-    def run(self):
-        """Keep on checkin whether the Beaglebone state has changed
-        
-        If the beaglebone status has changed, update it in the GUI
-
-        Raises:
-            Exception: ZMQ Error
-        """
-        
-        self.active = True
-        while self.is_socket_connected and self.active:
-            
-            try:
-                socket_list, _, exc_list = zmq.select([self.monitoring_socket], [], [], timeout=self.monitoring_timeout)
-
-                if self.monitoring_socket in socket_list:
-                    try:
-                        pickle_string = self.monitoring_socket.recv()
-                    except Exception:
-                        raise Exception
-
-                    monitoring_info = pickle.loads(pickle_string)
-                    
-                    # logger.info(monitoring_info)
-                
-                    if 'MassReading' in monitoring_info:
-                        mass_reading = monitoring_info['MassReading']
-                        if mass_reading != self.previous_rga_data:
-                            self.rga_new_data_signal.emit(mass_reading)
-                        else:
-                            running = False
-                            if running != self.previous_running:
-                                self.rga_new_running_signal.emit(running)
-                        self.previous_rga_data = mass_reading
-                    
-                    if 'FilamentStatus' in monitoring_info:
-                        info_reading = monitoring_info['FilamentStatus']
-                        if info_reading != self.previous_filament_info:
-                            self.rga_new_filament_signal.emit(info_reading)
-                        self.previous_filament_info = info_reading
-                        
-                    if 'RGAStatus' in monitoring_info:
-                        status_reading = monitoring_info['RGAStatus']
-                        if status_reading != self.previous_rga_info:
-                            self.rga_new_info_signal.emit(status_reading)
-                        self.previous_filament_info = status_reading
-                
-                    if 'ScanStatus' in monitoring_info:
-                        scan_reading = monitoring_info['ScanStatus']
-                        if scan_reading != self.previous_scan_reading:
-                            self.rga_new_scan_status_signal.emit(scan_reading)
-                        self.previous_scan_reading = scan_reading
-                
-            except zmq.ZMQError as exc:
-                raise exc
-
-class mPlotCanvas(Canvas):
-    def __init__(self):
-        super().__init__()
-        
-        # self.fig, self.ax = 
-        self.fig = Figure()
-        self.ax  = self.fig.add_subplot(111)
-        Canvas.__init__(self, self.fig)
-        Canvas.setSizePolicy(self, QSizePolicy.Expanding, QSizePolicy.Expanding)
-        Canvas.updateGeometry(self)
-        
-
-class RGAUIView(QMainWindow, Observable):
-    def __init__(self, *args, **kwargs):
-        super(RGAUIView, self).__init__(*args, **kwargs)
-        
-        self.setWindowTitle("E-Vision Residual Gas Analyzer")
-        self.setGeometry(300, 300, 1000, 700)
-        self.initUI()
-        
-        self.rga_monitoring_thread = QThread()
-        self.rga_monitoring_worker = RGAMonitoringWorker()
-        self.rga_monitoring_worker.moveToThread(self.rga_monitoring_thread)
-        
-        self.rga_monitoring_worker.rga_new_data_signal.connect(self._on_new_data_signal)
-        self.rga_monitoring_worker.rga_new_info_signal.connect(self._on_new_info_signal)
-        self.rga_monitoring_worker.rga_new_filament_signal.connect(self._on_new_filament_signal)
-        self.rga_monitoring_worker.rga_new_scan_status_signal.connect(self._on_new_scan_status_signal)
-        self.rga_monitoring_worker.rga_new_running_signal.connect(self._on_new_running_signal)
-        
-        self.rga_monitoring_thread.started.connect(self.rga_monitoring_worker.start_process)
-        
-        self.rga_monitoring_thread.start()
-        
-        self.barRingBuffer = [np.nan] * 201
-        
-        self.single_line = [[],[]]
-        self.peak_lines  = [{},[]]
-        
-    def initUI(self):
-        self.centerWidget = QWidget(self)
-        
-        self.gridLayout = QGridLayout(self.centerWidget)
-        
-        # Filament groupbox
-        self.groupBox   = QGroupBox()
-        self.verticalLayout = QVBoxLayout()
-        self.label = QLabel("<b>Filament information</b>")
-        self.formLayout = QFormLayout()
-        self.label_2 = QLabel("")
-        self.label_3 = QLabel("")
-        self.label_4 = QLabel("")
-        self.label_5 = QLabel("")
-        self.formLayout.addRow(QLabel("Summary state"), self.label_2)
-        self.formLayout.addRow(QLabel("Active filament"), self.label_3)
-        self.formLayout.addRow(QLabel("Max on time"), self.label_4)
-        self.verticalLayout.addWidget(self.label)
-        self.verticalLayout.addLayout(self.formLayout)
-        self.groupBox.setLayout(self.verticalLayout)
-        self.gridLayout.addWidget(self.groupBox, 0, 0, 1 ,1)
-        self.groupBox.setMinimumWidth(300)
-        self.groupBox.setMaximumWidth(400)
-        self.groupBox.setSizePolicy(QSizePolicy.Maximum, QSizePolicy.Maximum)
-        
-        
-        # Sensor groupbox
-        self.groupBox_2 = QGroupBox()
-        self.verticalLayout_2 = QVBoxLayout()
-        self.label_6 = QLabel("<b>Sensor information</b>")
-        self.formLayout_2 = QFormLayout()
-        self.label_7 = QLabel("")
-        self.label_8 = QLabel("")
-        self.label_9 = QLabel("")
-        self.label_10 = QLabel("")
-        self.label_11 = QLabel("")
-        self.label_12 = QLabel("")
-        self.label_13 = QLabel("")
-        self.label_14 = QLabel("")
-        self.label_15 = QLabel("")
-        self.label_16 = QLabel("")
-        self.label_17 = QLabel("")
-        self.formLayout_2.addRow(QLabel("Name"), self.label_7)
-        self.formLayout_2.addRow(QLabel("Serial number"), self.label_8)
-        self.formLayout_2.addRow(QLabel("User application"), self.label_9)
-        self.formLayout_2.addRow(QLabel("User address"), self.label_10)
-        self.formLayout_2.addRow(QLabel("State"), self.label_11)
-        self.formLayout_2.addRow(QLabel("Product ID"), self.label_12)
-        self.formLayout_2.addRow(QLabel("Detector type"), self.label_13)
-        self.formLayout_2.addRow(QLabel("Total pressure gauge"), self.label_14)
-        self.formLayout_2.addRow(QLabel("Filament type"), self.label_15)
-        self.formLayout_2.addRow(QLabel("Sensor type"), self.label_16)
-        self.formLayout_2.addRow(QLabel("Max mass"), self.label_17)
-        self.verticalLayout_2.addWidget(self.label_6)
-        self.verticalLayout_2.addLayout(self.formLayout_2)
-        self.groupBox_2.setLayout(self.verticalLayout_2)
-        self.gridLayout.addWidget(self.groupBox_2, 1, 0, 1 ,1)
-        self.groupBox_2.setMinimumWidth(300)
-        self.groupBox_2.setMaximumWidth(400)
-        self.groupBox_2.setSizePolicy(QSizePolicy.Maximum, QSizePolicy.Maximum)
-        
-        # Scan status
-        self.groupBox_3 = QGroupBox()
-        self.verticalLayout_3 = QVBoxLayout()
-        self.label_18 = QLabel("<b>Scan information</b>")
-        self.formLayout_6 = QFormLayout()
-        self.label_20 = QLabel("")
-        self.label_21 = QLabel("")
-        self.label_22 = QLabel("")
-        self.label_23 = QLabel("")
-        self.label_24 = QLabel("")
-        self.label_25 = QLabel("")
-        self.label_26 = QLabel("")
-        self.label_27 = QLabel("")
-        self.formLayout_6.addRow(QLabel("Start mass"), self.label_20)
-        self.formLayout_6.addRow(QLabel("End mass"), self.label_21)
-        self.formLayout_6.addRow(QLabel("Filter mode"), self.label_22)
-        self.formLayout_6.addRow(QLabel("Accuracy"), self.label_23)
-        self.formLayout_6.addRow(QLabel("E Gain Index"), self.label_24)
-        self.formLayout_6.addRow(QLabel("Source index"), self.label_25)
-        self.formLayout_6.addRow(QLabel("Detector index"), self.label_26)
-        self.formLayout_6.addRow(QLabel("Running"), self.label_27)
-        self.verticalLayout_3.addWidget(self.label_18)
-        self.verticalLayout_3.addLayout(self.formLayout_6)
-        self.groupBox_3.setLayout(self.verticalLayout_3)
-        self.gridLayout.addWidget(self.groupBox_3, 2, 0 ,1, 1)
-        self.groupBox_3.setMinimumWidth(300)
-        self.groupBox_3.setMaximumWidth(400)
-        self.groupBox_3.setSizePolicy(QSizePolicy.Maximum, QSizePolicy.Maximum)
-        # spacerItem = QSpacerItem(40, 20, QSizePolicy.Expanding, QSizePolicy.Minimum)
-
-        
-        # Plot navigation groupbox
-        self.groupBox_4 = QGroupBox()
-        self.horizontalLayout = QHBoxLayout()
-        self.formLayout_3 = QFormLayout()
-        self.label_29 = QLabel("Start mass:")
-        self.spinBox = QSpinBox()
-        self.spinBox.setMinimum(1)
-        self.spinBox.setMaximum(200)
-        self.spinBox.setValue(1)
-        self.spinBox.setMaximumWidth(150)
-        self.spinBox.valueChanged.connect(self._set_plot_x_axis)
-        self.label_30 = QLabel("End mass:")
-        self.spinBox_2 = QSpinBox()
-        self.spinBox_2.setMinimum(2)
-        self.spinBox_2.setMaximum(200)
-        self.spinBox_2.setValue(100)
-        self.spinBox_2.setMaximumWidth(150)
-        self.spinBox.valueChanged.connect(self._set_plot_x_axis)
-        self.comboBox = QComboBox()
-        self.comboBox.addItems(['PeakCenter', 'PeakMax', 'PeakAverage'])
-        self.comboBox.setMaximumWidth(150)
-        
-        self.label_28 = QLabel("Mass:")
-        self.spinBox_7 = QSpinBox()
-        self.spinBox_7.setMinimum(1)
-        self.spinBox_7.setMaximum(200)
-        self.spinBox_7.setValue(4)
-        self.spinBox_7.setMaximumWidth(150)
-        self.label_28.hide()
-        self.spinBox_7.hide()
-        self.label_32 = QLabel("Filter mode:")
-        self.formLayout_3.addRow(self.label_29, self.spinBox)
-        self.formLayout_3.addRow(self.label_30, self.spinBox_2)
-        self.formLayout_3.addRow(self.label_28, self.spinBox_7)
-        self.formLayout_3.addRow(self.label_32, self.comboBox)
-        self.horizontalLayout.addLayout(self.formLayout_3)
-        
-        self.formLayout_4 = QFormLayout()
-        self.label_33 = QLabel("Accuracy:")
-        self.spinBox_3 = QSpinBox()
-        self.spinBox_3.setMinimum(0)
-        self.spinBox_3.setMaximum(10)
-        self.spinBox_3.setValue(5)
-        self.spinBox_3.setMinimumWidth(150)
-        self.label_34 = QLabel("EGain index:")
-        self.spinBox_4 = QSpinBox()
-        self.spinBox_4.setMinimumWidth(150)
-        self.label_35 = QLabel("Source index:")
-        self.spinBox_5 = QSpinBox()
-        self.spinBox_5.setMinimumWidth(150)
-        self.label_36 = QLabel("Detector index:")
-        self.spinBox_6 = QSpinBox()
-        self.spinBox_6.setMinimumWidth(150)
-        self.formLayout_4.addRow(self.label_33, self.spinBox_3)
-        self.formLayout_4.addRow(self.label_34, self.spinBox_4)
-        self.formLayout_4.addRow(self.label_35, self.spinBox_5)
-        self.formLayout_4.addRow(self.label_36, self.spinBox_6)
-        self.horizontalLayout.addLayout(self.formLayout_4)
-        
-        spacerItem = QSpacerItem(40, 20, QSizePolicy.Expanding, QSizePolicy.Minimum)
-        self.horizontalLayout.addItem(spacerItem)
-        
-        self.formLayout_5 = QFormLayout()
-        # self.comboBox_2 = QComboBox()
-        # self.comboBox_2.addItems(['bar', 'peak', 'leak'])
-        # self.comboBox_2.currentTextChanged.connect(self._on_mode_changed)
-        # self.formLayout_5.addRow(QLabel("Measurement mode:"), self.comboBox_2)
-        self.checkbox = QCheckBox("Continous measurement")
-        self.formLayout_5.addRow(None, self.checkbox)
-        
-        
-        self.pushButton = QPushButton("Turn off filament")
-        self.pushButton.clicked.connect(self._on_toggle_filament)
-        self.formLayout_5.addRow(QLabel(""), self.pushButton)
-        self.pushButton_2 = QPushButton("Start scanning")
-        self.pushButton_2.clicked.connect(self._on_toggle_scan)
-        self.spinBox_8 = QSpinBox()
-        self.spinBox_8.setMinimum(0)
-        self.spinBox_8.setMaximum(1000)
-        self.spinBox_8.setValue(10)
-        self.formLayout_5.addRow(self.spinBox_8, self.pushButton_2)
-        self.pushButton_3 = QPushButton("Restart scan")
-        self.pushButton_3.clicked.connect(self._on_restart_scan)
-        self.formLayout_5.addRow(QLabel(""), self.pushButton_3)
-        self.horizontalLayout.addLayout(self.formLayout_5)
-        
-        self.groupBox_4.setLayout(self.horizontalLayout)
-        self.groupBox_4.setSizePolicy(QSizePolicy.Minimum, QSizePolicy.Maximum)
-        self.gridLayout.addWidget(self.groupBox_4, 3, 0, 1, 3)
-        
-        # Plot widget
-        self.canvas = mPlotCanvas()
-        self.canvas.ax.set_xticks(range(self.spinBox.value(), self.spinBox_2.value(), 10))
-        self.canvas.ax.grid(True, which='major')
-        self.canvas.ax.grid(True, which='minor', linestyle='--')
-        self.gridLayout.addWidget(self.canvas, 0, 1, 3, 2)
-        self.canvas.setSizePolicy(QSizePolicy.Minimum, QSizePolicy.Minimum)
-        
-        self.setCentralWidget(self.centerWidget)
-    
-    def _set_plot_x_axis(self):
-        self.canvas.ax.set_xticks(range(self.spinBox.value(), self.spinBox_2.value(), 10))
-    
-    def _on_mode_changed(self):
-        sender = self.sender()
-        mode = sender.currentText()
-        if mode == 'leak':
-            self.label_28.show()
-            self.label_29.hide()
-            self.label_30.hide()
-            self.spinBox.hide()
-            self.spinBox_2.hide()
-            self.spinBox_7.show()
-        if mode == 'bar':
-            self.label_28.hide()
-            self.label_28.show()
-            self.label_30.show()
-            self.spinBox.show()
-            self.spinBox_2.show()
-            self.spinBox_7.hide()
-        if mode == 'peak':
-            self.label_28.hide()
-            self.label_28.hide()
-            self.label_30.hide()
-            self.spinBox.hide()
-            self.spinBox_2.hide()
-            self.spinBox_7.hide()
-    
-    def _on_restart_scan(self):
-        try:
-            self.actionObservers({'restart_scan' : []})
-        except Exception as ex:
-            logger.exception(ex)
-    
-    def setEnableControls(self, state):
-        self.label_29.setEnabled(state)
-        self.label_30.setEnabled(state)
-        self.label_28.setEnabled(state)
-        self.label_32.setEnabled(state)
-        self.spinBox.setEnabled(state)
-        self.spinBox_7.setEnabled(state)
-        self.spinBox_2.setEnabled(state)
-        self.comboBox.setEnabled(state)
-        
-        self.label_33.setEnabled(state)
-        self.label_34.setEnabled(state)
-        self.label_35.setEnabled(state)
-        self.label_36.setEnabled(state)
-        self.spinBox_3.setEnabled(state)
-        self.spinBox_4.setEnabled(state)
-        self.spinBox_5.setEnabled(state)
-        self.spinBox_6.setEnabled(state)
-    
-    def _on_toggle_scan(self):
-        # sender = self.sender()
-        
-        # scan_type = self.comboBox_2.currentText()
-        name = datetime.now().strftime("%m%d%Y%H%M%S")
-        # if scan_type == 'bar':
-        start_mass = self.spinBox.value()
-        end_mass = self.spinBox_2.value()
-        filter_mode = self.comboBox.currentText()
-        accuracy = self.spinBox_3.value()
-        e_gain_index = self.spinBox_4.value()
-        source_index = self.spinBox_5.value()
-        detector_index = self.spinBox_6.value()
-        num_scans = self.spinBox_8.value()
-        try:
-            if 'Start' in self.pushButton_2.text():
-                self.pushButton_2.setText("Stop scan")
-                self.actionObservers({'toggle_scan' : [False]})
-                self.actionObservers({'add_bar_chart' : [name,
-                                                        start_mass,
-                                                        end_mass,
-                                                        filter_mode,
-                                                        accuracy,
-                                                        e_gain_index,
-                                                        source_index,
-                                                        detector_index]})
-                
-                logger.info(f'Starting scan {name}, Start mass: {start_mass}, End mass: {end_mass},')
-                self.actionObservers({'toggle_scan' : [True, num_scans]})
-            elif 'Stop' in self.pushButton_2.text():
-                self.pushButton_2.setText("Start scan")
-                logger.info(f'Stopping scan {name}, Start mass: {start_mass}, End mass: {end_mass},')
-                self.actionObservers({'toggle_scan' : [False]})
-        except Exception as ex:
-            logger.exception(ex)
-                
-    def _on_toggle_filament(self):
-        sender = self.sender()
-        try:
-            if 'off' in sender.text():
-                logger.info("Turning on filament")
-                self.actionObservers({'toggle_filament' : [False]})
-            elif 'on' in sender.text():
-                logger.info("Turning off filament")
-                self.actionObservers({'toggle_filament' : [True]})
-        except Exception as ex:
-            logger.exception(ex)
-    
-    def _on_new_running_signal(self, monitoring_info):
-        if monitoring_info:
-            self.label_27.setText('True')
-            self.pushButton_2.setText("Stop scan")
-            self.pushButton_3.setEnabled(True)
-            self.setEnableControls(False)
-        else:
-            if 'Stop' in self.pushButton_2.text():
-                if self.checkbox.isChecked():
-                    nScans = self.spinBox_8.value()
-                    self.actionObservers({'resume_scan' : [nScans]})
-            else:
-                self.label_27.setText('False')
-                self.pushButton_2.setText("Start scan")
-                self.pushButton_3.setEnabled(False)
-                self.setEnableControls(True)
-                self.barRingBuffer = [np.nan] * 200
-    
-    def _on_new_scan_status_signal(self, monitoring_info):
-        
-        if 'Running' in monitoring_info:
-            running = monitoring_info['Running']
-            
-            if running:
-                self.pushButton_2.setText("Stop scan")
-                self.pushButton_3.setEnabled(True)
-            else:
-                self.pushButton_2.setText("Start scan")
-                self.pushButton_3.setEnabled(False)
-                try:
-                    self.actionObservers({'toggle_scan' : [False]})
-                except Exception as ex:
-                    logger.exectpion(ex)
-            
-
-        self.label_20.setText(monitoring_info['StartMass'])
-        self.label_21.setText(monitoring_info['EndMass'])
-        self.label_22.setText(monitoring_info['FilterMode'])
-        self.label_23.setText(monitoring_info['Accuracy'])
-        self.label_24.setText(monitoring_info['EGainIndex'])
-        self.label_25.setText(monitoring_info['SourceIndex'])
-        self.label_26.setText(monitoring_info['DetectorIndex'])
-        self.label_27.setText(str(monitoring_info['Running']))
-    
-    def _on_new_data_signal(self, monitoring_info):
-        if monitoring_info != []:
-            for i, value in enumerate(monitoring_info):
-                if value != 0:
-                    self.barRingBuffer[i] = value
-            
-            x = range(1, len(self.barRingBuffer)+1)
-            self.canvas.ax.clear()
-            self.canvas.ax.set_ylabel("Pressure")
-            self.canvas.ax.set_yscale("log")
-            self.canvas.ax.grid(True, which='major')
-            self.canvas.ax.grid(True, which='minor', linestyle='--')
-            self.canvas.ax.set_ylim((1E-9, 1E-4))
-            self.canvas.ax.set_xlim((1, self.spinBox_2.value()))
-            self.canvas.ax.bar(x, self.barRingBuffer, align='center')
-            self.canvas.draw()
-
-    def _on_new_info_signal(self, monitoring_info):
-        self.label_7.setText(monitoring_info['Name'])
-        self.label_8.setText(monitoring_info['SerialNumber'])
-        self.label_9.setText(monitoring_info['UserApplication'])
-        self.label_10.setText(monitoring_info['UserAddress'])
-        self.label_11.setText(monitoring_info['State'])
-        self.label_12.setText(monitoring_info['ProductID'])
-        self.label_13.setText(monitoring_info['DetectorType'])
-        self.label_14.setText(monitoring_info['TotalPressureGauge'])
-        self.label_15.setText(monitoring_info['FilamentType'])
-        self.label_16.setText(monitoring_info['SensorType'])
-        self.label_17.setText(monitoring_info['MaxMass'])
-    
-    def _on_new_filament_signal(self, monitoring_info):
-        self.label_2.setText(monitoring_info['SummaryState'])
-        
-        if monitoring_info['SummaryState'] == 'OFF':
-            self.pushButton.setText('Turn on filament')
-        else:
-            self.pushButton.setText('Turn off filament')
-
-        self.label_3.setText(monitoring_info['ActiveFilament'])
-        self.label_4.setText(monitoring_info['MaxOnTime'])
-        self.label_5.setText(monitoring_info['OnTimeRemaining'])
-    
-
-class RGAUIModel:
-    def __init__(self, mode):
-        self.mode = mode
-        
-        if self.mode == 'proxy':
-            try:
-                self.rga = EvisionProxy()
-            except Exception as exc:
-                raise exc
-            
-        elif self.mode == 'simulator':
-            self.rga = EvisionSimulator()
-        else:
-            raise ValueError(f'Unknown type of rga implementation passed into the model')
-            
-            if self.rga is not None:
-                logger.debug(f'RGA Controller initialized as {self.rga.__class__.__name__}')
-
-    
-    def stop_scan(self):
-        self.rga.stop_scan()
-        self.rga.measurement_remove_all()
-    
-    def resume_scan(self):
-        pass
-       
-    def restart_scan(self):
-        self.rga.restart_scan()
-        
-    def resume_scan(self, num):
-        self.rga.resume_scan(num)
-    
-    def start_scan(self, num):
-        self.rga.start_scan(num)
-    
-    def filament_control(self, state):
-        self.rga.filament_control(state)
-
-    def add_bar_chart(self, name, startMass, endMass, filterMode, accuracy, eGainIndex, sourceIndex, detectorIndex):
-        self.rga.add_bar_chart(name, startMass, endMass, filterMode, accuracy, eGainIndex, sourceIndex, detectorIndex)
-
-    def add_peak_jump(self, name, filterMode='PeakCenter', accuracy=5, eGainIndex=0, sourceIndex=0, detectorIndex=0):
-        self.rga.add_peak_jump(name, filterMode, accuracy, eGainIndex, sourceIndex, detectorIndex)
-
-    def add_single_peak(self, name, mass, accuracy, eGainIndex, sourceIndex, detectorIndex):
-        self.rga.add_single_peak(name, mass, accuracy, eGainIndex, sourceIndex, detectorIndex)
-    
-    def add_scan(self, name):
-        self.rga.add_scan(name)
-
-class RGAUIController(Observer):
-    def __init__(self, model: RGAUIModel, view:RGAUIView):
-        self.model = model
-        self.view  = view
-        self.view.addObserver(self)
-        
-    def update(self, changed_object):
-        text = changed_object.text()
-        
-        if text == "Reconnect":
-            if changed_object.isChecked():
-                logger.debug("Reconnecting the RGA model.")
-
-            if self.model.reconnect():
-                self.view.set_connection_state(True)
-                
-                if not self.model.has_commands():
-                    self.model.load_commands()  
-            else:
-                self.view.reconnect_action.setChecked(False)
-        else:
-            self.view.reconnect_action.setChecked(False)
-            self.model.disconnect()
-            self.view.set_connection_state(False)
-            
-        return
-    
-    def do(self, actions):
-        for action, value in actions.items():
-            if action == "toggle_filament":
-                self.model.filament_control(value[0])
-            if action == 'toggle_scan':   
-                if value[0]:
-                    self.model.start_scan(value[1])
-                else:
-                    self.model.stop_scan()
-            if action == 'add_bar_chart':
-                self.model.stop_scan()
-                self.model.add_bar_chart(value[0], value[1], value[2],value[3],value[4],value[5], value[6], value[7])
-                self.model.add_scan(value[0])
-            if action == 'restart_scan':
-                self.model.restart_scan()
-            if action == 'resume_scan':
-                self.model.resume_scan(value[0])
-        
-def parse_arguments():
-    """
-    Prepare the arguments that are specific for this application.
-    """
-    parser = argparse.ArgumentParser()
-    parser.add_argument(
-        "--type",
-        dest="type",
-        action="store",
-        choices={"proxy", "simulator", "crio"},
-        help="Specify AEU cRIO implementation you want to connect to.",
-        default="proxy",
-    )    
-    args = parser.parse_args()
-    return args
-
-def main():
-    args = list(sys.argv)
-
-    app = QApplication(args)
-    
-    args = parse_arguments()
-
-    view = RGAUIView()
-    model = RGAUIModel(args.type)
-    controller = RGAUIController(model, view)
-    
-    view.show()
-    sys.exit(app.exec_())
-
-if __name__ == "__main__":
-    main()