visaljs 0.0.2 → 0.0.3

package/runtime/third_party/boringssl/include/openssl/aes.h

@@ -0,0 +1,173 @@
+// Copyright 2002-2016 The OpenSSL Project Authors. All Rights Reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_AES_H
+#define OPENSSL_HEADER_AES_H
+
+#include <openssl/base.h>   // IWYU pragma: export
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// Raw AES functions.
+
+
+#define AES_ENCRYPT 1
+#define AES_DECRYPT 0
+
+// AES_MAXNR is the maximum number of AES rounds.
+#define AES_MAXNR 14
+
+#define AES_BLOCK_SIZE 16
+
+// aes_key_st should be an opaque type, but EVP requires that the size be
+// known.
+struct aes_key_st {
+  uint32_t rd_key[4 * (AES_MAXNR + 1)];
+  unsigned rounds;
+};
+typedef struct aes_key_st AES_KEY;
+
+// AES_set_encrypt_key configures `aeskey` to encrypt with the `bits`-bit key,
+// `key`. `key` must point to `bits`/8 bytes. It returns zero on success and a
+// negative number if `bits` is an invalid AES key size.
+//
+// WARNING: this function breaks the usual return value convention.
+OPENSSL_EXPORT int AES_set_encrypt_key(const uint8_t *key, unsigned bits,
+                                       AES_KEY *aeskey);
+
+// AES_set_decrypt_key configures `aeskey` to decrypt with the `bits`-bit key,
+// `key`. `key` must point to `bits`/8 bytes. It returns zero on success and a
+// negative number if `bits` is an invalid AES key size.
+//
+// WARNING: this function breaks the usual return value convention.
+OPENSSL_EXPORT int AES_set_decrypt_key(const uint8_t *key, unsigned bits,
+                                       AES_KEY *aeskey);
+
+// AES_encrypt encrypts a single block from `in` to `out` with `key`. The `in`
+// and `out` pointers may overlap.
+OPENSSL_EXPORT void AES_encrypt(const uint8_t *in, uint8_t *out,
+                                const AES_KEY *key);
+
+// AES_decrypt decrypts a single block from `in` to `out` with `key`. The `in`
+// and `out` pointers may overlap.
+OPENSSL_EXPORT void AES_decrypt(const uint8_t *in, uint8_t *out,
+                                const AES_KEY *key);
+
+
+// Block cipher modes.
+
+// AES_ctr128_encrypt encrypts (or decrypts, it's the same in CTR mode) `len`
+// bytes from `in` to `out`. The `num` parameter must be set to zero on the
+// first call and `ivec` will be incremented. This function may be called
+// in-place with `in` equal to `out`, but otherwise the buffers may not
+// partially overlap. A partial overlap may overwrite input data before it is
+// read.
+OPENSSL_EXPORT void AES_ctr128_encrypt(const uint8_t *in, uint8_t *out,
+                                       size_t len, const AES_KEY *key,
+                                       uint8_t ivec[AES_BLOCK_SIZE],
+                                       uint8_t ecount_buf[AES_BLOCK_SIZE],
+                                       unsigned int *num);
+
+// AES_ecb_encrypt encrypts (or decrypts, if `enc` == `AES_DECRYPT`) a single,
+// 16 byte block from `in` to `out`. This function may be called in-place with
+// `in` equal to `out`, but otherwise the buffers may not partially overlap. A
+// partial overlap may overwrite input data before it is read.
+OPENSSL_EXPORT void AES_ecb_encrypt(const uint8_t *in, uint8_t *out,
+                                    const AES_KEY *key, const int enc);
+
+// AES_cbc_encrypt encrypts (or decrypts, if `enc` == `AES_DECRYPT`) `len`
+// bytes from `in` to `out`. The length must be a multiple of the block size.
+// This function may be called in-place with `in` equal to `out`, but otherwise
+// the buffers may not partially overlap. A partial overlap may overwrite input
+// data before it is read.
+OPENSSL_EXPORT void AES_cbc_encrypt(const uint8_t *in, uint8_t *out, size_t len,
+                                    const AES_KEY *key, uint8_t *ivec,
+                                    const int enc);
+
+// AES_ofb128_encrypt encrypts (or decrypts, it's the same in OFB mode) `len`
+// bytes from `in` to `out`. The `num` parameter must be set to zero on the
+// first call. This function may be called in-place with `in` equal to `out`,
+// but otherwise the buffers may not partially overlap. A partial overlap may
+// overwrite input data before it is read.
+OPENSSL_EXPORT void AES_ofb128_encrypt(const uint8_t *in, uint8_t *out,
+                                       size_t len, const AES_KEY *key,
+                                       uint8_t *ivec, int *num);
+
+// AES_cfb128_encrypt encrypts (or decrypts, if `enc` == `AES_DECRYPT`) `len`
+// bytes from `in` to `out`. The `num` parameter must be set to zero on the
+// first call. This function may be called in-place with `in` equal to `out`,
+// but otherwise the buffers may not partially overlap. A partial overlap may
+// overwrite input data before it is read.
+OPENSSL_EXPORT void AES_cfb128_encrypt(const uint8_t *in, uint8_t *out,
+                                       size_t len, const AES_KEY *key,
+                                       uint8_t *ivec, int *num, int enc);
+
+
+// AES key wrap.
+//
+// These functions implement AES Key Wrap mode, as defined in RFC 3394. They
+// should never be used except to interoperate with existing systems that use
+// this mode.
+
+// AES_wrap_key performs AES key wrap on `in` which must be a multiple of 8
+// bytes. `iv` must point to an 8 byte value or be NULL to use the default IV.
+// `key` must have been configured for encryption. On success, it writes
+// `in_len` + 8 bytes to `out` and returns `in_len` + 8. Otherwise, it returns
+// -1.
+OPENSSL_EXPORT int AES_wrap_key(const AES_KEY *key, const uint8_t *iv,
+                                uint8_t *out, const uint8_t *in, size_t in_len);
+
+// AES_unwrap_key performs AES key unwrap on `in` which must be a multiple of 8
+// bytes. `iv` must point to an 8 byte value or be NULL to use the default IV.
+// `key` must have been configured for decryption. On success, it writes
+// `in_len` - 8 bytes to `out` and returns `in_len` - 8. Otherwise, it returns
+// -1.
+OPENSSL_EXPORT int AES_unwrap_key(const AES_KEY *key, const uint8_t *iv,
+                                  uint8_t *out, const uint8_t *in,
+                                  size_t in_len);
+
+
+// AES key wrap with padding.
+//
+// These functions implement AES Key Wrap with Padding mode, as defined in RFC
+// 5649. They should never be used except to interoperate with existing systems
+// that use this mode.
+
+// AES_wrap_key_padded performs a padded AES key wrap on `in` which must be
+// between 1 and 2^32-1 bytes. `key` must have been configured for encryption.
+// On success it writes at most `max_out` bytes of ciphertext to `out`, sets
+// `*out_len` to the number of bytes written, and returns one. On failure it
+// returns zero. To ensure success, set `max_out` to at least `in_len` + 15.
+OPENSSL_EXPORT int AES_wrap_key_padded(const AES_KEY *key, uint8_t *out,
+                                       size_t *out_len, size_t max_out,
+                                       const uint8_t *in, size_t in_len);
+
+// AES_unwrap_key_padded performs a padded AES key unwrap on `in` which must be
+// a multiple of 8 bytes. `key` must have been configured for decryption. On
+// success it writes at most `max_out` bytes to `out`, sets `*out_len` to the
+// number of bytes written, and returns one. On failure it returns zero. Setting
+// `max_out` to `in_len` is a sensible estimate.
+OPENSSL_EXPORT int AES_unwrap_key_padded(const AES_KEY *key, uint8_t *out,
+                                         size_t *out_len, size_t max_out,
+                                         const uint8_t *in, size_t in_len);
+
+
+#if defined(__cplusplus)
+}  // extern C
+#endif
+
+#endif  // OPENSSL_HEADER_AES_H

package/runtime/third_party/boringssl/include/openssl/arm_arch.h

@@ -0,0 +1,24 @@
+// Copyright 2011-2016 The OpenSSL Project Authors. All Rights Reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_ARM_ARCH_H
+#define OPENSSL_HEADER_ARM_ARCH_H
+
+#include <openssl/target.h>
+
+// This header historically defined constants used by Arm assembly, which was
+// exposed publicly to simplify the build. This is no longer needed, but we
+// retain the header for compatibility.
+
+#endif  // OPENSSL_HEADER_ARM_ARCH_H

package/runtime/third_party/boringssl/include/openssl/asm_base.h

@@ -0,0 +1,219 @@
+// Copyright 2023 The BoringSSL Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_ASM_BASE_H
+#define OPENSSL_HEADER_ASM_BASE_H
+
+#include <openssl/target.h>
+
+
+// This header contains symbols and common sections used by assembly files. It
+// is included as a public header to simplify the build, but is not intended for
+// external use.
+//
+// Every assembly file must include this header. Some linker features require
+// all object files to be tagged with some section metadata. This header file,
+// when included in assembly, adds that metadata. It also makes defines like
+// `OPENSSL_X86_64` available and includes the prefixing macros.
+//
+// Including this header in an assembly file implies:
+//
+// - The file does not require an executable stack.
+//
+// - The file, on aarch64, uses the macros defined below to be compatible with
+//   BTI and PAC.
+//
+// - The file, on x86_64, requires the program to be compatible with Intel IBT
+//   and SHSTK
+
+#if defined(__ASSEMBLER__)
+
+#if defined(BORINGSSL_PREFIX)
+#include <openssl/prefix_symbols_internal_S.h>
+#endif  // BORINGSSL_PREFIX
+
+#if defined(__ELF__)
+// Every ELF object file, even empty ones, should disable executable stacks. See
+// https://www.airs.com/blog/archives/518.
+// clang-format off
+.pushsection .note.GNU-stack, "", %progbits
+.popsection
+// clang-format on
+#endif
+
+#if defined(__CET__) && defined(OPENSSL_X86_64)
+// Clang and GCC define __CET__ and provide <cet.h> when they support Intel's
+// Indirect Branch Tracking.
+// https://lpc.events/event/7/contributions/729/attachments/496/903/CET-LPC-2020.pdf
+//
+// cet.h defines _CET_ENDBR which is used to mark function entry points for IBT.
+// and adds the assembly marker. The value of _CET_ENDBR is made dependent on if
+// '-fcf-protection' is passed to the compiler. _CET_ENDBR is only required when
+// the function is the target of an indirect jump, but BoringSSL chooses to mark
+// all assembly entry points because it is easier, and allows BoringSSL's ABI
+// tester to call the assembly entry points via an indirect jump.
+#include <cet.h>
+#else
+#define _CET_ENDBR
+#endif
+
+#if defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64)
+
+// We require the ARM assembler provide `__ARM_ARCH` from Arm C Language
+// Extensions (ACLE). This is supported in GCC 4.8+ and Clang 3.2+. MSVC does
+// not implement ACLE, but we require Clang's assembler on Windows.
+#if !defined(__ARM_ARCH)
+#error "ARM assembler must define __ARM_ARCH"
+#endif
+
+// Even when building for 32-bit ARM, support for aarch64 crypto instructions
+// will be included.
+//
+// TODO(davidben): Remove this and the corresponding ifdefs? This is only
+// defined because some OpenSSL assembly files would allow disabling the NEON
+// code entirely. I think we'd prefer to do that by lifting the dispatch to C
+// anyway.
+#define __ARM_MAX_ARCH__ 8
+
+// Support macros for
+//   - Armv8.3-A Pointer Authentication and
+//   - Armv8.5-A Branch Target Identification
+// features which require emitting a .note.gnu.property section with the
+// appropriate architecture-dependent feature bits set.
+//
+// `AARCH64_SIGN_LINK_REGISTER` and `AARCH64_VALIDATE_LINK_REGISTER` expand to
+// PACIxSP and AUTIxSP, respectively. `AARCH64_SIGN_LINK_REGISTER` should be
+// used immediately before saving the LR register (x30) to the stack.
+// `AARCH64_VALIDATE_LINK_REGISTER` should be used immediately after restoring
+// it. Note `AARCH64_SIGN_LINK_REGISTER`'s modifications to LR must be undone
+// with `AARCH64_VALIDATE_LINK_REGISTER` before RET. The SP register must also
+// have the same value at the two points. For example:
+//
+//   .global f
+//   f:
+//     AARCH64_SIGN_LINK_REGISTER
+//     stp x29, x30, [sp, #-96]!
+//     mov x29, sp
+//     ...
+//     ldp x29, x30, [sp], #96
+//     AARCH64_VALIDATE_LINK_REGISTER
+//     ret
+//
+// `AARCH64_VALID_CALL_TARGET` expands to BTI 'c'. Either it, or
+// `AARCH64_SIGN_LINK_REGISTER`, must be used at every point that may be an
+// indirect call target. In particular, all symbols exported from a file must
+// begin with one of these macros. For example, a leaf function that does not
+// save LR can instead use `AARCH64_VALID_CALL_TARGET`:
+//
+//   .globl return_zero
+//   return_zero:
+//     AARCH64_VALID_CALL_TARGET
+//     mov x0, #0
+//     ret
+//
+// A non-leaf function which does not immediately save LR may need both macros
+// because `AARCH64_SIGN_LINK_REGISTER` appears late. For example, the function
+// may jump to an alternate implementation before setting up the stack:
+//
+//   .globl with_early_jump
+//   with_early_jump:
+//     AARCH64_VALID_CALL_TARGET
+//     cmp x0, #128
+//     b.lt .Lwith_early_jump_128
+//     AARCH64_SIGN_LINK_REGISTER
+//     stp x29, x30, [sp, #-96]!
+//     mov x29, sp
+//     ...
+//     ldp x29, x30, [sp], #96
+//     AARCH64_VALIDATE_LINK_REGISTER
+//     ret
+//
+//  .Lwith_early_jump_128:
+//     ...
+//     ret
+//
+// These annotations are only required with indirect calls. Private symbols that
+// are only the target of direct calls do not require annotations. Also note
+// that `AARCH64_VALID_CALL_TARGET` is only valid for indirect calls (BLR), not
+// indirect jumps (BR). Indirect jumps in assembly are currently not supported
+// and would require a macro for BTI 'j'.
+//
+// Although not necessary, it is safe to use these macros in 32-bit ARM
+// assembly. This may be used to simplify dual 32-bit and 64-bit files.
+//
+// References:
+// - "ELF for the Arm® 64-bit Architecture"
+//   https://github.com/ARM-software/abi-aa/blob/main/aaelf64/aaelf64.rst
+// - "Providing protection for complex software"
+//   https://developer.arm.com/architectures/learn-the-architecture/providing-protection-for-complex-software
+
+#if defined(__ARM_FEATURE_BTI_DEFAULT) && __ARM_FEATURE_BTI_DEFAULT == 1
+#define GNU_PROPERTY_AARCH64_BTI (1 << 0)   // Has Branch Target Identification
+#define AARCH64_VALID_CALL_TARGET hint #34  // BTI 'c'
+#else
+#define GNU_PROPERTY_AARCH64_BTI 0  // No Branch Target Identification
+#define AARCH64_VALID_CALL_TARGET
+#endif
+
+#if defined(__ARM_FEATURE_PAC_DEFAULT) && \
+    (__ARM_FEATURE_PAC_DEFAULT & 1) == 1  // Signed with A-key
+#define GNU_PROPERTY_AARCH64_POINTER_AUTH \
+  (1 << 1)                                       // Has Pointer Authentication
+#define AARCH64_SIGN_LINK_REGISTER hint #25      // PACIASP
+#define AARCH64_VALIDATE_LINK_REGISTER hint #29  // AUTIASP
+#elif defined(__ARM_FEATURE_PAC_DEFAULT) && \
+    (__ARM_FEATURE_PAC_DEFAULT & 2) == 2  // Signed with B-key
+#define GNU_PROPERTY_AARCH64_POINTER_AUTH \
+  (1 << 1)                                       // Has Pointer Authentication
+#define AARCH64_SIGN_LINK_REGISTER hint #27      // PACIBSP
+#define AARCH64_VALIDATE_LINK_REGISTER hint #31  // AUTIBSP
+#else
+#define GNU_PROPERTY_AARCH64_POINTER_AUTH 0  // No Pointer Authentication
+#if GNU_PROPERTY_AARCH64_BTI != 0
+#define AARCH64_SIGN_LINK_REGISTER AARCH64_VALID_CALL_TARGET
+#else
+#define AARCH64_SIGN_LINK_REGISTER
+#endif
+#define AARCH64_VALIDATE_LINK_REGISTER
+#endif
+
+#if defined(__ELF__) && \
+    (GNU_PROPERTY_AARCH64_POINTER_AUTH != 0 || GNU_PROPERTY_AARCH64_BTI != 0)
+// clang-format off
+.pushsection .note.gnu.property, "a";
+.balign 8;
+.long 4;
+.long 0x10;
+.long 0x5;
+.asciz "GNU";
+.long 0xc0000000; /* GNU_PROPERTY_AARCH64_FEATURE_1_AND */
+.long 4;
+.long (GNU_PROPERTY_AARCH64_POINTER_AUTH | GNU_PROPERTY_AARCH64_BTI);
+.long 0;
+.popsection;
+// clang-format on
+#endif
+#endif  // ARM || AARCH64
+
+#if defined(__APPLE__)
+// Require all Apple assembly to be compatible with `.subsections_via_symbols`.
+// Perlasm output will automatically no-op it by marking all non-initials with
+// `.alt_entry`. Other assembly must either do something similar or be
+// compatible with the optimization.
+.subsections_via_symbols
+#endif
+
+#endif  // __ASSEMBLER__
+
+#endif  // OPENSSL_HEADER_ASM_BASE_H