v86 0.3.7 → 0.5.10

package/bios/seabios/src/romlayout.S

@@ -1,698 +0,0 @@
-// Rom layout and bios assembler to C interface.
-//
-// Copyright (C) 2008-2012  Kevin O'Connor <kevin@koconnor.net>
-// Copyright (C) 2002  MandrakeSoft S.A.
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "asm-offsets.h" // BREGS_*
-#include "config.h" // CONFIG_*
-#include "entryfuncs.S" // ENTRY_*
-#include "hw/rtc.h" // CMOS_RESET_CODE
-#include "x86.h" // CR0_*
-
-        .code16
-
-
-/****************************************************************
- * 16bit / 32bit call trampolines
- ****************************************************************/
-
-// Place CPU into 32bit mode from 16bit mode.
-// %edx = return location (in 32bit mode)
-// Clobbers: ecx, flags, segment registers, cr0, idt/gdt
-        DECLFUNC transition32
-        .global transition32_nmi_off
-transition32:
-        // Disable irqs (and clear direction flag)
-        cli
-        cld
-
-        // Disable nmi
-        movl %eax, %ecx
-        movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax
-        outb %al, $PORT_CMOS_INDEX
-        inb $PORT_CMOS_DATA, %al
-
-        // enable a20
-        inb $PORT_A20, %al
-        orb $A20_ENABLE_BIT, %al
-        outb %al, $PORT_A20
-        movl %ecx, %eax
-
-transition32_nmi_off:
-        // Set segment descriptors
-        lidtw %cs:pmode_IDT_info
-        lgdtw %cs:rombios32_gdt_48
-
-        // Enable protected mode
-        movl %cr0, %ecx
-        andl $~(CR0_PG|CR0_CD|CR0_NW), %ecx
-        orl $CR0_PE, %ecx
-        movl %ecx, %cr0
-
-        // start 32bit protected mode code
-        ljmpl $SEG32_MODE32_CS, $(BUILD_BIOS_ADDR + 1f)
-
-        .code32
-        // init data segments
-1:      movl $SEG32_MODE32_DS, %ecx
-        movw %cx, %ds
-        movw %cx, %es
-        movw %cx, %ss
-        movw %cx, %fs
-        movw %cx, %gs
-
-        jmpl *%edx
-        .code16
-
-// Place CPU into 16bit mode from 32bit mode.
-// %edx = return location (in 16bit mode)
-// Clobbers: ecx, flags, segment registers, cr0, idt/gdt
-        DECLFUNC transition16
-        .global transition16big
-        .code32
-transition16:
-        // Reset data segment limits
-        movl $SEG32_MODE16_DS, %ecx
-        movw %cx, %ds
-        movw %cx, %es
-        movw %cx, %ss
-        movw %cx, %fs
-        movw %cx, %gs
-
-        // Jump to 16bit mode
-        ljmpw $SEG32_MODE16_CS, $1f
-
-transition16big:
-        movl $SEG32_MODE16BIG_DS, %ecx
-        movw %cx, %ds
-        movw %cx, %es
-        movw %cx, %ss
-        movw %cx, %fs
-        movw %cx, %gs
-
-        ljmpw $SEG32_MODE16BIG_CS, $1f
-
-        .code16
-        // Disable protected mode
-1:      movl %cr0, %ecx
-        andl $~CR0_PE, %ecx
-        movl %ecx, %cr0
-
-        // far jump to flush CPU queue after transition to real mode
-        ljmpw $SEG_BIOS, $2f
-
-        // restore IDT to normal real-mode defaults
-2:      lidtw %cs:rmode_IDT_info
-
-        // Clear segment registers
-        xorw %cx, %cx
-        movw %cx, %fs
-        movw %cx, %gs
-        movw %cx, %es
-        movw %cx, %ds
-        movw %cx, %ss  // Assume stack is in segment 0
-
-        jmpl *%edx
-
-
-/****************************************************************
- * External calling trampolines
- ****************************************************************/
-
-// Far call a 16bit function from 16bit mode with a specified cpu register state
-// %eax = address of struct bregs, %edx = segment of struct bregs
-// Clobbers: %e[bc]x, %e[ds]i, flags
-        DECLFUNC __farcall16
-__farcall16:
-        // Save %edx/%eax, %ebp
-        pushl %ebp
-        pushl %eax
-        pushl %edx
-
-        // Setup for iretw call
-        movl %edx, %ds
-        pushw %cs
-        pushw $1f                       // return point
-        pushw BREGS_flags(%eax)         // flags
-        pushl BREGS_code(%eax)          // CS:IP
-
-        // Load calling registers and invoke call
-        RESTOREBREGS_DSEAX
-        iretw                           // XXX - just do a lcalll
-1:
-        // Store flags, es, eax
-        pushfw
-        cli
-        cld
-        pushw %ds
-        pushl %eax
-        movw 0x08(%esp), %ds
-        movl 0x0c(%esp), %eax
-        SAVEBREGS_POP_DSEAX
-        popw BREGS_flags(%eax)
-        movw %ss, %cx
-        movw %cx, %ds                   // Restore %ds == %ss
-
-        // Remove %edx/%eax, restore %ebp
-        popl %edx
-        popl %eax
-        popl %ebp
-
-        retl
-
-// IRQ trampolines
-        .macro IRQ_TRAMPOLINE num
-        DECLFUNC irq_trampoline_0x\num
-        irq_trampoline_0x\num :
-        int $0x\num
-        lretw
-        .endm
-
-        IRQ_TRAMPOLINE 02
-        IRQ_TRAMPOLINE 05
-        IRQ_TRAMPOLINE 10
-        IRQ_TRAMPOLINE 13
-        IRQ_TRAMPOLINE 15
-        IRQ_TRAMPOLINE 16
-        IRQ_TRAMPOLINE 18
-        IRQ_TRAMPOLINE 19
-        IRQ_TRAMPOLINE 1b
-        IRQ_TRAMPOLINE 1c
-        IRQ_TRAMPOLINE 4a
-
-
-/****************************************************************
- * Misc. entry points.
- ****************************************************************/
-
-// Entry point for QEMU smi interrupts.
-        DECLFUNC entry_smi
-entry_smi:
-        // Transition to 32bit mode.
-        movl $1f + BUILD_BIOS_ADDR, %edx
-        jmp transition32_nmi_off
-        .code32
-1:      movl $BUILD_SMM_ADDR + 0x8000, %esp
-        calll _cfunc32flat_handle_smi - BUILD_BIOS_ADDR
-        rsm
-        .code16
-
-// Entry point for QEMU smp sipi interrupts.
-        DECLFUNC entry_smp
-entry_smp:
-        // Transition to 32bit mode.
-        cli
-        cld
-        movl $2f + BUILD_BIOS_ADDR, %edx
-        jmp transition32_nmi_off
-        .code32
-        // Acquire lock and take ownership of shared stack
-1:      rep ; nop
-2:      lock btsl $0, SMPLock
-        jc 1b
-        movl SMPStack, %esp
-        // Call handle_smp
-        calll _cfunc32flat_handle_smp - BUILD_BIOS_ADDR
-        // Release lock and halt processor.
-        movl $0, SMPLock
-3:      hlt
-        jmp 3b
-        .code16
-
-// Resume (and reboot) entry point - called from entry_post
-        DECLFUNC entry_resume
-entry_resume:
-        // Disable interrupts
-        cli
-        cld
-        // Use the ExtraStack in low mem.
-        movl $_zonelow_seg, %eax
-        movw %ax, %ds
-        movw %ax, %ss
-        movl $ExtraStack + BUILD_EXTRA_STACK_SIZE, %esp
-        // Call handler.
-        jmp handle_resume
-
-// PMM entry point
-        DECLFUNC entry_pmm
-entry_pmm:
-        pushl %esp              // Backup %esp, then clear high bits
-        movzwl %sp, %esp
-        pushfl                  // Save registers clobbered by C code
-        cli
-        cld
-        PUSHBREGS
-        movl %ss, %ecx          // Move %ss to %ds
-        movw %cx, %ds
-        shll $4, %ecx
-        movl $_cfunc32flat_handle_pmm, %eax // Setup: call32(handle_pmm, args, -1)
-        leal PUSHBREGS_size+12(%esp, %ecx), %edx // %edx points to start of args
-        movl $-1, %ecx
-        calll __call32
-        movw %ax, BREGS_eax(%esp)       // Modify %ax:%dx to return %eax
-        shrl $16, %eax
-        movw %ax, BREGS_edx(%esp)
-        POPBREGS
-        popfl
-        popl %esp
-        lretw
-
-// PnP entry points
-        DECLFUNC entry_pnp_real
-        .global entry_pnp_prot
-entry_pnp_prot:
-        pushl %esp
-        jmp 1f
-entry_pnp_real:
-        pushl %esp              // Backup %esp, then clear high bits
-        movzwl %sp, %esp
-1:
-        pushfl                  // Save registers clobbered by C code
-        cli
-        cld
-        PUSHBREGS
-        movw %ss, %cx           // Move %ss to %ds
-        movw %cx, %ds
-        leal PUSHBREGS_size+12(%esp), %eax  // %eax points to start of u16 args
-        calll handle_pnp
-        movw %ax, BREGS_eax(%esp)   // Modify %eax to return %ax
-        POPBREGS
-        popfl
-        popl %esp
-        lretw
-
-// APM entry points
-        DECLFUNC entry_apm16
-entry_apm16:
-        pushfw          // save flags
-        pushl %eax      // dummy
-        ENTRY_ARG handle_apm
-        addw $4, %sp    // pop dummy
-        popfw           // restore flags
-        lretw
-
-        DECLFUNC entry_apm32
-        .code32
-entry_apm32:
-        pushfl
-        pushl %gs
-        pushl %cs               // Move second descriptor after %cs to %gs
-        addl $16, (%esp)
-        popl %gs
-        ENTRY_ARG_ESP _cfunc32seg_handle_apm
-        popl %gs
-        popfl
-        lretl
-        .code16
-
-// PCI-BIOS entry points
-        DECLFUNC entry_pcibios32
-        .code32
-entry_pcibios32:
-        pushfl
-        pushl %gs               // Backup %gs and set %gs=%ds
-        pushl %ds
-        popl %gs
-        ENTRY_ARG_ESP _cfunc32seg_handle_pcibios
-        popl %gs
-        popfl
-        lretl
-        .code16
-
-        DECLFUNC entry_pcibios16
-entry_pcibios16:
-        ENTRY_ARG handle_pcibios
-        iretw
-
-// int 1589 entry point
-        DECLFUNC entry_1589
-entry_1589:
-        ENTRY_ARG handle_1589
-        iretw
-
-// BIOS32 support
-        DECLFUNC entry_bios32
-        .code32
-entry_bios32:
-        pushfl
-#if CONFIG_PCIBIOS
-        // Check for PCI-BIOS request
-        cmpl $0x49435024, %eax // $PCI
-        jne 1f
-        movl $BUILD_BIOS_ADDR, %ebx
-        movl $BUILD_BIOS_SIZE, %ecx
-        movl $entry_pcibios32, %edx
-        xorb %al, %al
-        jmp 2f
-#endif
-        // Unknown request
-1:      movb $0x80, %al
-        // Return to caller
-2:      popfl
-        lretl
-        .code16
-
-// 32bit elf entry point
-        DECLFUNC entry_elf
-        .code32
-entry_elf:
-        cli
-        cld
-        movl %eax, entry_elf_eax
-        movl %ebx, entry_elf_ebx
-        lidtl (BUILD_BIOS_ADDR + pmode_IDT_info)
-        lgdtl (BUILD_BIOS_ADDR + rombios32_gdt_48)
-        movl $SEG32_MODE32_DS, %eax
-        movw %ax, %ds
-        movw %ax, %es
-        movw %ax, %fs
-        movw %ax, %gs
-        movw %ax, %ss
-        movl $BUILD_STACK_ADDR, %esp
-        ljmpl $SEG32_MODE32_CS, $_cfunc32flat_handle_post
-        .code16
-
-// UEFI Compatibility Support Module (CSM) entry point
-        DECLFUNC entry_csm
-entry_csm:
-        // Backup register state
-        pushfw
-        cli
-        cld
-        pushl %eax                      // dummy
-        PUSHBREGS
-
-        // Backup stack location and convert to a "flat pointer"
-        movl %ss, %eax
-        movw %ax, BREGS_code+2(%esp)    // Store %ss in bregs->code.seg
-        shll $4, %eax
-        addl %esp, %eax
-
-        // Change to BUILD_STACK_ADDR stack and call handle_csm(bregs)
-        ENTRY_INTO32 _cfunc32flat_handle_csm
-
-        DECLFUNC __csm_return
-        .code32
-__csm_return:
-        movl $1f, %edx
-        jmp transition16big
-        .code16
-
-        // Switch back to original stack
-1:      movzwl BREGS_code+2(%eax), %edx
-        movl %edx, %ecx
-        shll $4, %ecx
-        subl %ecx, %eax
-        movl %edx, %ss
-        movl %eax, %esp
-
-        // Restore register state and return.
-        POPBREGS
-        addw $4, %sp                    // pop dummy
-        popfw
-        lretw
-
-// Serial console "hooked vga" entry point
-        DECLFUNC entry_sercon
-entry_sercon:
-        // Setup for chain loading to real vga handler
-        pushfw
-        pushl %cs:sercon_real_vga_handler
-
-        // Set %ds to varlow segment
-        cli
-        cld
-        pushw %ds
-        pushl %eax
-        movl $_zonelow_seg, %eax
-        movl %eax, %ds
-
-        // Test if the sercon handler can be called
-        movl %esp, %eax         // Test for broken x86emu
-        pushl $1f
-        retl
-1:      cmpl %esp, %eax
-        jne 4f
-        cmpb $0, sercon_enable  // Test that sercon is enabled
-        je 3f
-
-        // call handle_sercon
-        popl %eax
-        popw %ds
-2:      pushl $handle_sercon
-#if CONFIG_ENTRY_EXTRASTACK
-        jmp irqentry_arg_extrastack
-#else
-        jmp irqentry_arg
-#endif
-
-        // sercon disabled - check for legacy text modeset and otherwise exit
-3:      popl %eax
-        popw %ds
-        cmpw $0x0007, %ax
-        jle 2b
-        iretw
-
-        // Running on broken x86emu - restore stack and exit
-4:      movl %eax, %esp
-        popl %eax
-        popw %ds
-        iretw
-
-
-/****************************************************************
- * Interrupt entry points
- ****************************************************************/
-
-        // Main entry point for hardware interrupts handled on extra stack
-        DECLFUNC irqentry_extrastack
-irqentry_extrastack:
-        cli
-        cld
-        pushw %ds               // Set %ds:%eax to space on ExtraStack
-        pushl %eax
-        movl $_zonelow_seg, %eax
-        movl %eax, %ds
-        movl StackPos, %eax
-        subl $PUSHBREGS_size+8, %eax
-        SAVEBREGS_POP_DSEAX
-        popl %ecx
-        movl %esp, PUSHBREGS_size(%eax)
-        movw %ss, PUSHBREGS_size+4(%eax)
-
-        movw %ds, %dx           // Setup %ss/%esp and call function
-        movw %dx, %ss
-        movl %eax, %esp
-        calll *%ecx
-
-        movl %esp, %eax         // Restore registers and return
-        movw PUSHBREGS_size+4(%eax), %ss
-        movl PUSHBREGS_size(%eax), %esp
-        RESTOREBREGS_DSEAX
-        iretw
-
-        // Main entry point for software interrupts handled on extra stack
-        DECLFUNC irqentry_arg_extrastack
-irqentry_arg_extrastack:
-        cli
-        cld
-        pushw %ds               // Set %ds:%eax to space on ExtraStack
-        pushl %eax
-        movl $_zonelow_seg, %eax
-        movl %eax, %ds
-        movl StackPos, %eax
-        subl $PUSHBREGS_size+16, %eax
-        SAVEBREGS_POP_DSEAX     // Save registers on extra stack
-        popl %ecx
-        movl %esp, PUSHBREGS_size+8(%eax)
-        movw %ss, PUSHBREGS_size+12(%eax)
-        popl BREGS_code(%eax)
-        popw BREGS_flags(%eax)
-
-        movw %ds, %dx           // Setup %ss/%esp and call function
-        movw %dx, %ss
-        movl %eax, %esp
-        calll *%ecx
-
-        movl %esp, %eax         // Restore registers and return
-        movw PUSHBREGS_size+12(%eax), %ss
-        movl PUSHBREGS_size+8(%eax), %esp
-        popl %edx
-        popw %dx
-        pushw BREGS_flags(%eax)
-        pushl BREGS_code(%eax)
-        RESTOREBREGS_DSEAX
-        iretw
-
-        // Main entry point for software interrupts (using caller's stack)
-        DECLFUNC irqentry_arg
-irqentry_arg:
-        ENTRY_ARG_ST
-        iretw
-
-        // Helper macros for hardware interrupt declaration
-        .macro IRQ_ENTRY num
-        .global entry_\num
-        entry_\num :
-        pushl $ handle_\num
-        jmp irqentry_extrastack
-        .endm
-
-        .macro DECL_IRQ_ENTRY num
-        DECLFUNC entry_\num
-        IRQ_ENTRY \num
-        .endm
-
-        // Helper macros for software interrupt declaration
-        .macro IRQ_ENTRY_ARG num
-        .global entry_\num
-        entry_\num :
-        pushl $ handle_\num
-#if CONFIG_ENTRY_EXTRASTACK
-        jmp irqentry_arg_extrastack
-#else
-        jmp irqentry_arg
-#endif
-        .endm
-
-        .macro DECL_IRQ_ENTRY_ARG num
-        DECLFUNC entry_\num
-        IRQ_ENTRY_ARG \num
-        .endm
-
-        // Various entry points (that don't require a fixed location).
-        DECL_IRQ_ENTRY_ARG 13
-        DECL_IRQ_ENTRY 76
-        DECL_IRQ_ENTRY 70
-        DECL_IRQ_ENTRY 74
-        DECL_IRQ_ENTRY 75
-        DECL_IRQ_ENTRY hwpic1
-        DECL_IRQ_ENTRY hwpic2
-
-        // int 18/19 are special - they reset stack and call into 32bit mode.
-        DECLFUNC entry_19
-entry_19:
-        ENTRY_INTO32 _cfunc32flat_handle_19
-
-        DECLFUNC entry_18
-entry_18:
-        ENTRY_INTO32 _cfunc32flat_handle_18
-
-
-/****************************************************************
- * Fixed position entry points
- ****************************************************************/
-
-        // Specify a location in the fixed part of bios area.
-        .macro ORG addr
-        .section .fixedaddr.\addr
-        .endm
-
-        ORG 0xe05b
-entry_post:
-        cmpl $0, %cs:HaveRunPost                // Check for resume/reboot
-        jnz entry_resume
-        ENTRY_INTO32 _cfunc32flat_handle_post   // Normal entry point
-
-        ORG 0xe2c3
-        .global entry_02
-entry_02:
-        ENTRY handle_02  // NMI handler does not switch onto extra stack
-        iretw
-
-        ORG 0xe3fe
-        .global entry_13_official
-entry_13_official:
-        jmp entry_13
-
-        // 0xe401 - OldFDPT in misc.c
-
-        ORG 0xe6f2
-        .global entry_19_official
-entry_19_official:
-        jmp entry_19
-
-        // 0xe6f5 - BIOS_CONFIG_TABLE in misc.c
-
-        // 0xe729 - BaudTable in misc.c
-
-        ORG 0xe739
-        IRQ_ENTRY_ARG 14
-
-        ORG 0xe82e
-        IRQ_ENTRY_ARG 16
-
-        ORG 0xe987
-        IRQ_ENTRY 09
-
-        ORG 0xec59
-        IRQ_ENTRY_ARG 40
-
-        ORG 0xef57
-        IRQ_ENTRY 0e
-
-        // 0xefc7 - diskette_param_table in misc.c
-
-        ORG 0xefd2
-        IRQ_ENTRY_ARG 17
-
-        ORG 0xf045
-entry_10_0x0f:
-        // XXX - INT 10 Functions 0-Fh Entry Point
-        iretw
-
-        ORG 0xf065
-entry_10:
-        iretw
-
-        // 0xf0a4 - VideoParams in misc.c
-
-        ORG 0xf841
-        IRQ_ENTRY_ARG 12
-
-        ORG 0xf84d
-        IRQ_ENTRY_ARG 11
-
-        ORG 0xf859
-        .global entry_15_official
-entry_15_official:
-        cmpb $0x89, %ah
-        je entry_1589           // 1589 calls return in protected mode
-        IRQ_ENTRY_ARG 15
-
-        // 0xfa6e - vgafont8 in font.c
-
-        ORG 0xfe6e
-        .global entry_1a_official
-entry_1a_official:
-        cmpb $0xb1, %ah
-        je entry_pcibios16      // PCIBIOS calls can be in protected mode
-        IRQ_ENTRY_ARG 1a
-
-        ORG 0xfea5
-        IRQ_ENTRY 08
-
-        // 0xfef3 - InitVectors in misc.c
-
-        ORG 0xff53
-        .global entry_iret_official
-entry_iret_official:
-        iretw
-
-        ORG 0xff54
-        IRQ_ENTRY_ARG 05
-
-        ORG 0xfff0 // Power-up Entry Point
-        .global reset_vector
-reset_vector:
-        ljmpw $SEG_BIOS, $entry_post
-
-        // 0xfff5 - BiosDate in misc.c
-
-        // 0xfffe - BiosModelId in misc.c
-
-        // 0xffff - BiosChecksum in misc.c
-
-        .end