v86 0.3.7 → 0.5.10

package/bios/seabios/src/pcibios.c

@@ -1,241 +0,0 @@
-// PCI BIOS (int 1a/b1) calls
-//
-// Copyright (C) 2008  Kevin O'Connor <kevin@koconnor.net>
-// Copyright (C) 2002  MandrakeSoft S.A.
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "biosvar.h" // GET_GLOBAL
-#include "bregs.h" // struct bregs
-#include "hw/pci.h" // pci_config_readl
-#include "hw/pcidevice.h" // MaxPCIBus
-#include "hw/pci_regs.h" // PCI_VENDOR_ID
-#include "output.h" // dprintf
-#include "std/pirtable.h" // struct pir_header
-#include "string.h" // checksum
-#include "util.h" // handle_1ab1
-
-// romlayout.S
-extern void entry_bios32(void);
-extern void entry_pcibios32(void);
-
-#define RET_FUNC_NOT_SUPPORTED 0x81
-#define RET_BAD_VENDOR_ID      0x83
-#define RET_DEVICE_NOT_FOUND   0x86
-#define RET_BUFFER_TOO_SMALL   0x89
-
-// installation check
-static void
-handle_1ab101(struct bregs *regs)
-{
-    regs->al = 0x01; // Flags - "Config Mechanism #1" supported.
-    regs->bx = 0x0210; // PCI version 2.10
-    regs->cl = GET_GLOBAL(MaxPCIBus);
-    regs->edx = 0x20494350; // "PCI "
-    regs->edi = (u32)entry_pcibios32 + BUILD_BIOS_ADDR;
-    set_code_success(regs);
-}
-
-// find pci device
-static void
-handle_1ab102(struct bregs *regs)
-{
-    u32 id = (regs->cx << 16) | regs->dx;
-    int count = regs->si;
-    int bus = -1;
-    while (bus < GET_GLOBAL(MaxPCIBus)) {
-        bus++;
-        int bdf;
-        foreachbdf(bdf, bus) {
-            u32 v = pci_config_readl(bdf, PCI_VENDOR_ID);
-            if (v != id)
-                continue;
-            if (count--)
-                continue;
-            regs->bx = bdf;
-            set_code_success(regs);
-            return;
-        }
-    }
-    set_code_invalid(regs, RET_DEVICE_NOT_FOUND);
-}
-
-// find class code
-static void
-handle_1ab103(struct bregs *regs)
-{
-    int count = regs->si;
-    u32 classprog = regs->ecx;
-    int bus = -1;
-    while (bus < GET_GLOBAL(MaxPCIBus)) {
-        bus++;
-        int bdf;
-        foreachbdf(bdf, bus) {
-            u32 v = pci_config_readl(bdf, PCI_CLASS_REVISION);
-            if ((v>>8) != classprog)
-                continue;
-            if (count--)
-                continue;
-            regs->bx = bdf;
-            set_code_success(regs);
-            return;
-        }
-    }
-    set_code_invalid(regs, RET_DEVICE_NOT_FOUND);
-}
-
-// read configuration byte
-static void
-handle_1ab108(struct bregs *regs)
-{
-    regs->cl = pci_config_readb(regs->bx, regs->di);
-    set_code_success(regs);
-}
-
-// read configuration word
-static void
-handle_1ab109(struct bregs *regs)
-{
-    regs->cx = pci_config_readw(regs->bx, regs->di);
-    set_code_success(regs);
-}
-
-// read configuration dword
-static void
-handle_1ab10a(struct bregs *regs)
-{
-    regs->ecx = pci_config_readl(regs->bx, regs->di);
-    set_code_success(regs);
-}
-
-// write configuration byte
-static void
-handle_1ab10b(struct bregs *regs)
-{
-    pci_config_writeb(regs->bx, regs->di, regs->cl);
-    set_code_success(regs);
-}
-
-// write configuration word
-static void
-handle_1ab10c(struct bregs *regs)
-{
-    pci_config_writew(regs->bx, regs->di, regs->cx);
-    set_code_success(regs);
-}
-
-// write configuration dword
-static void
-handle_1ab10d(struct bregs *regs)
-{
-    pci_config_writel(regs->bx, regs->di, regs->ecx);
-    set_code_success(regs);
-}
-
-// get irq routing options
-static void
-handle_1ab10e(struct bregs *regs)
-{
-    struct pir_header *pirtable_gf = GET_GLOBAL(PirAddr);
-    if (! pirtable_gf) {
-        set_code_invalid(regs, RET_FUNC_NOT_SUPPORTED);
-        return;
-    }
-    struct pir_header *pirtable_g = GLOBALFLAT2GLOBAL(pirtable_gf);
-
-    struct param_s {
-        u16 size;
-        u16 buf_off;
-        u16 buf_seg;
-    } *param_far = (void*)(regs->di+0);
-
-    // Validate and update size.
-    u16 bufsize = GET_FARVAR(regs->es, param_far->size);
-    u16 pirsize = GET_GLOBAL(pirtable_g->size) - sizeof(struct pir_header);
-    SET_FARVAR(regs->es, param_far->size, pirsize);
-    if (bufsize < pirsize) {
-        set_code_invalid(regs, RET_BUFFER_TOO_SMALL);
-        return;
-    }
-
-    // Get dest buffer.
-    void *buf_far = (void*)(GET_FARVAR(regs->es, param_far->buf_off)+0);
-    u16 buf_seg = GET_FARVAR(regs->es, param_far->buf_seg);
-
-    // Memcpy pir table slots to dest buffer.
-    memcpy_far(buf_seg, buf_far
-               , get_global_seg()
-               , (void*)(pirtable_g->slots) + get_global_offset()
-               , pirsize);
-
-    // XXX - bochs bios sets bx to (1 << 9) | (1 << 11)
-    regs->bx = GET_GLOBAL(pirtable_g->exclusive_irqs);
-    set_code_success(regs);
-}
-
-static void
-handle_1ab1XX(struct bregs *regs)
-{
-    set_code_unimplemented(regs, RET_FUNC_NOT_SUPPORTED);
-}
-
-void
-handle_1ab1(struct bregs *regs)
-{
-    //debug_stub(regs);
-
-    if (! CONFIG_PCIBIOS) {
-        set_invalid(regs);
-        return;
-    }
-
-    switch (regs->al) {
-    case 0x01: handle_1ab101(regs); break;
-    case 0x02: handle_1ab102(regs); break;
-    case 0x03: handle_1ab103(regs); break;
-    case 0x08: handle_1ab108(regs); break;
-    case 0x09: handle_1ab109(regs); break;
-    case 0x0a: handle_1ab10a(regs); break;
-    case 0x0b: handle_1ab10b(regs); break;
-    case 0x0c: handle_1ab10c(regs); break;
-    case 0x0d: handle_1ab10d(regs); break;
-    case 0x0e: handle_1ab10e(regs); break;
-    default:   handle_1ab1XX(regs); break;
-    }
-}
-
-// Entry point for pci bios functions.
-void VISIBLE16 VISIBLE32SEG
-handle_pcibios(struct bregs *regs)
-{
-    debug_enter(regs, DEBUG_HDL_pcibios);
-    handle_1ab1(regs);
-}
-
-
-/****************************************************************
- * 32bit interface
- ****************************************************************/
-
-struct bios32_s {
-    u32 signature;
-    u32 entry;
-    u8 version;
-    u8 length;
-    u8 checksum;
-    u8 reserved[5];
-} PACKED;
-
-struct bios32_s BIOS32HEADER __aligned(16) VARFSEG = {
-    .signature = 0x5f32335f, // _32_
-    .length = sizeof(BIOS32HEADER) / 16,
-};
-
-void
-bios32_init(void)
-{
-    dprintf(3, "init bios32\n");
-
-    BIOS32HEADER.entry = (u32)entry_bios32;
-    BIOS32HEADER.checksum -= checksum(&BIOS32HEADER, sizeof(BIOS32HEADER));
-}

package/bios/seabios/src/pmm.c

@@ -1,176 +0,0 @@
-// Post memory manager (PMM) calls
-//
-// Copyright (C) 2009-2013  Kevin O'Connor <kevin@koconnor.net>
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "biosvar.h" // FUNC16
-#include "config.h" // CONFIG_*
-#include "malloc.h" // _malloc
-#include "output.h" // dprintf
-#include "e820map.h" // struct e820entry
-#include "std/pmm.h" // PMM_SIGNATURE
-#include "string.h" // checksum
-#include "util.h" // pmm_init
-#include "x86.h" // __ffs
-
-extern struct pmmheader PMMHEADER;
-
-#if CONFIG_PMM
-struct pmmheader PMMHEADER __aligned(16) VARFSEG = {
-    .signature = PMM_SIGNATURE,
-    .version = 0x01,
-    .length = sizeof(PMMHEADER),
-};
-#endif
-
-// PMM - allocate
-static u32
-handle_pmm00(u16 *args)
-{
-    u32 length = *(u32*)&args[1], handle = *(u32*)&args[3];
-    u16 flags = args[5];
-    dprintf(3, "pmm00: length=%x handle=%x flags=%x\n"
-            , length, handle, flags);
-    struct zone_s *lowzone = &ZoneTmpLow, *highzone = &ZoneTmpHigh;
-    if (flags & 8) {
-        // Permanent memory request.
-        lowzone = &ZoneLow;
-        highzone = &ZoneHigh;
-    }
-    if (!length) {
-        // Memory size request
-        switch (flags & 3) {
-        default:
-        case 0:
-            return 0;
-        case 1:
-            return malloc_getspace(lowzone);
-        case 2:
-            return malloc_getspace(highzone);
-        case 3: {
-            u32 spacelow = malloc_getspace(lowzone);
-            u32 spacehigh = malloc_getspace(highzone);
-            if (spacelow > spacehigh)
-                return spacelow;
-            return spacehigh;
-        }
-        }
-    }
-    u32 size = length * 16;
-    if ((s32)size <= 0)
-        return 0;
-    u32 align = MALLOC_MIN_ALIGN;
-    if (flags & 4) {
-        align = 1<<__ffs(size);
-        if (align < MALLOC_MIN_ALIGN)
-            align = MALLOC_MIN_ALIGN;
-    }
-    u32 data;
-    switch (flags & 3) {
-    default:
-    case 0:
-        return 0;
-    case 1:
-        data = malloc_palloc(lowzone, size, align);
-        break;
-    case 2:
-        data = malloc_palloc(highzone, size, align);
-        if (!data && (flags & 8)) {
-            /*
-             * We are out of meory.  So go allocate from the (big)
-             * ZoneTmpHigh instead and reserve the block in the e820
-             * map so the OS will not override it.  That way we can
-             * handle big permanent allocations without needing a big
-             * ZoneHigh.
-             */
-            data = malloc_palloc(&ZoneTmpHigh, size, align);
-            if (data)
-                e820_add(data, size, E820_RESERVED);
-        }
-        break;
-    case 3: {
-        data = malloc_palloc(lowzone, size, align);
-        if (!data)
-            data = malloc_palloc(highzone, size, align);
-    }
-    }
-    if (data && handle != MALLOC_DEFAULT_HANDLE)
-        malloc_sethandle(data, handle);
-    return data;
-}
-
-// PMM - find
-static u32
-handle_pmm01(u16 *args)
-{
-    u32 handle = *(u32*)&args[1];
-    dprintf(3, "pmm01: handle=%x\n", handle);
-    if (handle == MALLOC_DEFAULT_HANDLE)
-        return 0;
-    return malloc_findhandle(handle);
-}
-
-// PMM - deallocate
-static u32
-handle_pmm02(u16 *args)
-{
-    u32 buffer = *(u32*)&args[1];
-    dprintf(3, "pmm02: buffer=%x\n", buffer);
-    int ret = malloc_pfree(buffer);
-    if (ret)
-        // Error
-        return 1;
-    return 0;
-}
-
-static u32
-handle_pmmXX(u16 *args)
-{
-    return PMM_FUNCTION_NOT_SUPPORTED;
-}
-
-u32 VISIBLE32INIT
-handle_pmm(u16 *args)
-{
-    ASSERT32FLAT();
-    if (! CONFIG_PMM)
-        return PMM_FUNCTION_NOT_SUPPORTED;
-
-    u16 arg1 = args[0];
-    dprintf(DEBUG_HDL_pmm, "pmm call arg1=%x\n", arg1);
-
-    u32 ret;
-    switch (arg1) {
-    case 0x00: ret = handle_pmm00(args); break;
-    case 0x01: ret = handle_pmm01(args); break;
-    case 0x02: ret = handle_pmm02(args); break;
-    default:   ret = handle_pmmXX(args); break;
-    }
-
-    return ret;
-}
-
-void
-pmm_init(void)
-{
-    if (! CONFIG_PMM)
-        return;
-
-    dprintf(3, "init PMM\n");
-
-    PMMHEADER.entry = FUNC16(entry_pmm);
-    PMMHEADER.checksum -= checksum(&PMMHEADER, sizeof(PMMHEADER));
-}
-
-void
-pmm_prepboot(void)
-{
-    if (! CONFIG_PMM)
-        return;
-
-    dprintf(3, "finalize PMM\n");
-
-    PMMHEADER.signature = 0;
-    PMMHEADER.entry.segoff = 0;
-}

package/bios/seabios/src/pnpbios.c

@@ -1,88 +0,0 @@
-// PNP BIOS calls
-//
-// Copyright (C) 2008  Kevin O'Connor <kevin@koconnor.net>
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "config.h" // BUILD_BIOS_ADDR
-#include "farptr.h" // SET_FARVAR
-#include "output.h" // dprintf
-#include "std/pnpbios.h" // PNP_SIGNATURE
-#include "string.h" // checksum
-#include "util.h" // pnp_init
-
-extern struct pnpheader PNPHEADER;
-extern char pnp_string[];
-
-#if CONFIG_PNPBIOS
-struct pnpheader PNPHEADER __aligned(16) VARFSEG = {
-    .signature = PNP_SIGNATURE,
-    .version = 0x10,
-    .length = sizeof(PNPHEADER),
-    .real_cs = SEG_BIOS,
-    .prot_base = BUILD_BIOS_ADDR,
-    .real_ds = SEG_BIOS,
-    .prot_database = BUILD_BIOS_ADDR,
-};
-#else
-// We need a copy of this string in the 0xf000 segment, but we are not
-// actually a PnP BIOS, so make sure it is *not* aligned, so OSes will
-// not see it if they scan.
-char pnp_string[] __aligned(2) VARFSEG = " $PnP";
-#endif
-
-// BBS - Get Version and Installation Check
-static u16
-handle_pnp60(u16 *args)
-{
-    u16 version_ptr = args[1];
-    u16 version_seg = args[2];
-    SET_FARVAR(version_seg, *(u16*)(version_ptr+0), 0x0101);
-    return 0;
-}
-
-static u16
-handle_pnpXX(u16 *args)
-{
-    return FUNCTION_NOT_SUPPORTED;
-}
-
-u16 VISIBLE16
-handle_pnp(u16 *args)
-{
-    if (! CONFIG_PNPBIOS)
-        return FUNCTION_NOT_SUPPORTED;
-
-    u16 arg1 = args[0];
-    dprintf(DEBUG_HDL_pnp, "pnp call arg1=%x\n", arg1);
-
-    switch (arg1) {
-    case 0x60: return handle_pnp60(args);
-    default:   return handle_pnpXX(args);
-    }
-}
-
-u16
-get_pnp_offset(void)
-{
-    if (! CONFIG_PNPBIOS)
-        return (u32)pnp_string + 1 - BUILD_BIOS_ADDR;
-    return (u32)&PNPHEADER - BUILD_BIOS_ADDR;
-}
-
-// romlayout.S
-extern void entry_pnp_real(void);
-extern void entry_pnp_prot(void);
-
-void
-pnp_init(void)
-{
-    if (! CONFIG_PNPBIOS)
-        return;
-
-    dprintf(3, "init PNPBIOS table\n");
-
-    PNPHEADER.real_ip = (u32)entry_pnp_real - BUILD_BIOS_ADDR;
-    PNPHEADER.prot_ip = (u32)entry_pnp_prot - BUILD_BIOS_ADDR;
-    PNPHEADER.checksum -= checksum(&PNPHEADER, sizeof(PNPHEADER));
-}