rp2040js 0.17.17 → 0.18.1

package/dist/esm/peripherals/pio.d.ts

@@ -1,120 +1,120 @@
-import { RP2040 } from '../rp2040';
-import { FIFO } from '../utils/fifo';
-import { DREQChannel } from './dma';
-import { BasePeripheral, Peripheral } from './peripheral';
-export declare enum WaitType {
-    None = 0,
-    Pin = 1,
-    rxFIFO = 2,
-    txFIFO = 3,
-    IRQ = 4,
-    Out = 5
-}
-export declare class StateMachine {
-    readonly rp2040: RP2040;
-    readonly pio: RPPIO;
-    readonly index: number;
-    enabled: boolean;
-    x: number;
-    y: number;
-    pc: number;
-    inputShiftReg: number;
-    inputShiftCount: number;
-    outputShiftReg: number;
-    outputShiftCount: number;
-    cycles: number;
-    execOpcode: number;
-    execValid: boolean;
-    updatePC: boolean;
-    clockDivInt: number;
-    clockDivFrac: number;
-    execCtrl: number;
-    shiftCtrl: number;
-    pinCtrl: number;
-    readonly rxFIFO: FIFO;
-    readonly txFIFO: FIFO;
-    outPinValues: number;
-    outPinDirection: number;
-    waiting: boolean;
-    waitType: WaitType;
-    waitIndex: number;
-    waitPolarity: boolean;
-    waitDelay: number;
-    readonly dreqRx: DREQChannel;
-    readonly dreqTx: DREQChannel;
-    constructor(rp2040: RP2040, pio: RPPIO, index: number);
-    private updateDMATx;
-    private updateDMARx;
-    writeFIFO(value: number): void;
-    readFIFO(): number;
-    get status(): 0 | 4294967295;
-    jmpCondition(condition: number): boolean;
-    get inPins(): number;
-    inSourceValue(source: number): number;
-    writeOutValue(destination: number, value: number, bitCount: number): void;
-    get pushThreshold(): number;
-    get pullThreshold(): number;
-    get sidesetCount(): number;
-    get setCount(): number;
-    get outCount(): number;
-    get inBase(): number;
-    get sidesetBase(): number;
-    get setBase(): number;
-    get outBase(): number;
-    get jmpPin(): number;
-    get wrapTop(): number;
-    get wrapBottom(): number;
-    setOutPinDirs(value: number): void;
-    setOutPins(value: number): void;
-    outInstruction(arg: number): void;
-    executeInstruction(opcode: number): void;
-    wait(type: WaitType, polarity: boolean, index: number): void;
-    nextPC(): void;
-    step(): void;
-    setSetPinDirs(value: number): void;
-    setSetPins(value: number): void;
-    setSideset(value: number, count: number): void;
-    transformMovValue(value: number, op: number): number;
-    setMovDestination(destination: number, value: number): void;
-    readUint32(offset: number): number;
-    writeUint32(offset: number, value: number): void;
-    get fifoStat(): number;
-    restart(): void;
-    clkDivRestart(): void;
-    checkWait(): void;
-}
-export declare class RPPIO extends BasePeripheral implements Peripheral {
-    readonly firstIrq: number;
-    readonly index: number;
-    readonly instructions: Uint32Array;
-    readonly dreqRx: DREQChannel[];
-    readonly dreqTx: DREQChannel[];
-    readonly machines: StateMachine[];
-    stopped: boolean;
-    fdebug: number;
-    inputSyncBypass: number;
-    irq: number;
-    pinValues: number;
-    pinDirections: number;
-    oldPinValues: number;
-    oldPinDirections: number;
-    private runTimer;
-    irq0IntEnable: number;
-    irq0IntForce: number;
-    irq1IntEnable: number;
-    irq1IntForce: number;
-    constructor(rp2040: RP2040, name: string, firstIrq: number, index: number);
-    get intRaw(): number;
-    get irq0IntStatus(): number;
-    get irq1IntStatus(): number;
-    readUint32(offset: number): number;
-    writeUint32(offset: number, value: number): void;
-    pinValuesChanged(value: number, firstPin: number, count: number): void;
-    pinDirectionsChanged(value: number, firstPin: number, count: number): void;
-    checkInterrupts(): void;
-    irqUpdated(): void;
-    checkChangedPins(): void;
-    step(): void;
-    run(): void;
-    stop(): void;
-}
+import { RP2040 } from '../rp2040.js';
+import { FIFO } from '../utils/fifo.js';
+import { DREQChannel } from './dma.js';
+import { BasePeripheral, Peripheral } from './peripheral.js';
+export declare enum WaitType {
+    None = 0,
+    Pin = 1,
+    rxFIFO = 2,
+    txFIFO = 3,
+    IRQ = 4,
+    Out = 5
+}
+export declare class StateMachine {
+    readonly rp2040: RP2040;
+    readonly pio: RPPIO;
+    readonly index: number;
+    enabled: boolean;
+    x: number;
+    y: number;
+    pc: number;
+    inputShiftReg: number;
+    inputShiftCount: number;
+    outputShiftReg: number;
+    outputShiftCount: number;
+    cycles: number;
+    execOpcode: number;
+    execValid: boolean;
+    updatePC: boolean;
+    clockDivInt: number;
+    clockDivFrac: number;
+    execCtrl: number;
+    shiftCtrl: number;
+    pinCtrl: number;
+    readonly rxFIFO: FIFO;
+    readonly txFIFO: FIFO;
+    outPinValues: number;
+    outPinDirection: number;
+    waiting: boolean;
+    waitType: WaitType;
+    waitIndex: number;
+    waitPolarity: boolean;
+    waitDelay: number;
+    readonly dreqRx: DREQChannel;
+    readonly dreqTx: DREQChannel;
+    constructor(rp2040: RP2040, pio: RPPIO, index: number);
+    private updateDMATx;
+    private updateDMARx;
+    writeFIFO(value: number): void;
+    readFIFO(): number;
+    get status(): 0 | 4294967295;
+    jmpCondition(condition: number): boolean;
+    get inPins(): number;
+    inSourceValue(source: number): number;
+    writeOutValue(destination: number, value: number, bitCount: number): void;
+    get pushThreshold(): number;
+    get pullThreshold(): number;
+    get sidesetCount(): number;
+    get setCount(): number;
+    get outCount(): number;
+    get inBase(): number;
+    get sidesetBase(): number;
+    get setBase(): number;
+    get outBase(): number;
+    get jmpPin(): number;
+    get wrapTop(): number;
+    get wrapBottom(): number;
+    setOutPinDirs(value: number): void;
+    setOutPins(value: number): void;
+    outInstruction(arg: number): void;
+    executeInstruction(opcode: number): void;
+    wait(type: WaitType, polarity: boolean, index: number): void;
+    nextPC(): void;
+    step(): void;
+    setSetPinDirs(value: number): void;
+    setSetPins(value: number): void;
+    setSideset(value: number, count: number): void;
+    transformMovValue(value: number, op: number): number;
+    setMovDestination(destination: number, value: number): void;
+    readUint32(offset: number): number;
+    writeUint32(offset: number, value: number): void;
+    get fifoStat(): number;
+    restart(): void;
+    clkDivRestart(): void;
+    checkWait(): void;
+}
+export declare class RPPIO extends BasePeripheral implements Peripheral {
+    readonly firstIrq: number;
+    readonly index: number;
+    readonly instructions: Uint32Array;
+    readonly dreqRx: DREQChannel[];
+    readonly dreqTx: DREQChannel[];
+    readonly machines: StateMachine[];
+    stopped: boolean;
+    fdebug: number;
+    inputSyncBypass: number;
+    irq: number;
+    pinValues: number;
+    pinDirections: number;
+    oldPinValues: number;
+    oldPinDirections: number;
+    private runTimer;
+    irq0IntEnable: number;
+    irq0IntForce: number;
+    irq1IntEnable: number;
+    irq1IntForce: number;
+    constructor(rp2040: RP2040, name: string, firstIrq: number, index: number);
+    get intRaw(): number;
+    get irq0IntStatus(): number;
+    get irq1IntStatus(): number;
+    readUint32(offset: number): number;
+    writeUint32(offset: number, value: number): void;
+    pinValuesChanged(value: number, firstPin: number, count: number): void;
+    pinDirectionsChanged(value: number, firstPin: number, count: number): void;
+    checkInterrupts(): void;
+    irqUpdated(): void;
+    checkChangedPins(): void;
+    step(): void;
+    run(): void;
+    stop(): void;
+}