oh-my-devpod 0.14.2

package/runtime/vendor/zsh/ohmyzsh/tools/require_tool.sh

@@ -0,0 +1,161 @@
+__require_tool_version_compare ()
+{
+  (
+    # Locally ignore failures, otherwise we'll exit whenever $1 and $2
+    # are not equal!
+    set +e
+
+awk_strverscmp='
+  # Use only awk features that work with 7th edition Unix awk (1978).
+  # My, what an old awk you have, Mr. Solaris!
+  END {
+    while (length(v1) || length(v2)) {
+      # Set d1 to be the next thing to compare from v1, and likewise for d2.
+      # Normally this is a single character, but if v1 and v2 contain digits,
+      # compare them as integers and fractions as strverscmp does.
+      if (v1 ~ /^[0-9]/ && v2 ~ /^[0-9]/) {
+	# Split v1 and v2 into their leading digit string components d1 and d2,
+	# and advance v1 and v2 past the leading digit strings.
+	for (len1 = 1; substr(v1, len1 + 1) ~ /^[0-9]/; len1++) continue
+	for (len2 = 1; substr(v2, len2 + 1) ~ /^[0-9]/; len2++) continue
+	d1 = substr(v1, 1, len1); v1 = substr(v1, len1 + 1)
+	d2 = substr(v2, 1, len2); v2 = substr(v2, len2 + 1)
+	if (d1 ~ /^0/) {
+	  if (d2 ~ /^0/) {
+	    # Compare two fractions.
+	    while (d1 ~ /^0/ && d2 ~ /^0/) {
+	      d1 = substr(d1, 2); len1--
+	      d2 = substr(d2, 2); len2--
+	    }
+	    if (len1 != len2 && ! (len1 && len2 && substr(d1, 1, 1) == substr(d2, 1, 1))) {
+	      # The two components differ in length, and the common prefix
+	      # contains only leading zeros.  Consider the longer to be less.
+	      d1 = -len1
+	      d2 = -len2
+	    } else {
+	      # Otherwise, compare as strings.
+	      d1 = "x" d1
+	      d2 = "x" d2
+	    }
+	  } else {
+	    # A fraction is less than an integer.
+	    exit 1
+	  }
+	} else {
+	  if (d2 ~ /^0/) {
+	    # An integer is greater than a fraction.
+	    exit 2
+	  } else {
+	    # Compare two integers.
+	    d1 += 0
+	    d2 += 0
+	  }
+	}
+      } else {
+	# The normal case, without worrying about digits.
+	if (v1 == "") d1 = v1; else { d1 = substr(v1, 1, 1); v1 = substr(v1,2) }
+	if (v2 == "") d2 = v2; else { d2 = substr(v2, 1, 1); v2 = substr(v2,2) }
+      }
+      if (d1 < d2) exit 1
+      if (d1 > d2) exit 2
+    }
+  }
+'
+    awk "$awk_strverscmp" v1="$1" v2="$2" /dev/null
+    case $? in
+      1)  echo '<';;
+      0)  echo '=';;
+      2)  echo '>';;
+    esac
+  )
+}
+
+
+__require_tool_fatal ()
+{
+    echo $@ >/dev/stderr
+    return 1
+}
+
+# Usage: require_tool program version
+# Returns: 0 if $1 version if greater equals than $2, 1 otherwise.
+# In case of error, message is written on error output.
+#
+# Example: require_tool gcc 4.6
+# Use GCC environment variable if defined instead of lookup for the tool
+# in the environment.
+require_tool ()
+{
+  envvar_name=$(echo $1 | tr '[:lower:]' '[:upper:]')
+  tool=$(printenv $envvar_name || echo $1)
+  local version=$($tool --version 2>/dev/null| \
+    sed -n 's/.*[^0-9.]\([0-9]*\.[0-9.]*\).*/\1/p;q')
+  if test x"$version" = x ; then
+      echo "$tool is required" >/dev/stderr
+      return 1
+  fi
+  case $(__require_tool_version_compare "$2" "$version") in
+    '>')
+	  echo "$1 $2 or better is required: this is $tool $version" >/dev/stderr
+	  return 1
+	  ;;
+  esac
+}
+
+usage() {
+    cat <<EOF
+NAME
+    require_tool.sh - Ensure version of a tool is greater than the one expected
+
+SYNOPSIS
+    require_tool.sh [ -h ]
+                    [ --help ]
+                    [ TOOL MIN_VERSION ]
+
+DESCRIPTION
+    TOOL is the name or path of the program to check. If the name is specified, its
+    path is deduced from PATH environment variable. If environment variable TOOL
+    (in upper-case characters) is defined, considers its value as path to the tool.
+
+    MIN_VERSION is a string representing the minimum required version.
+
+BEHAVIOR
+    * locate path to the program.
+    * execute $ TOOL_PATH --version
+    * extract version from standard output.
+    * compare this version to the expected one.
+
+OPTIONS
+    -h --help
+        Display this message and exit 0
+
+ERRORS
+    if program is not found or its version is prior to expected version,
+    a message is written to error output.
+
+EXIT VALUE
+    returns 0 if program version if greater equals than expected version,
+    returns 1 otherwise.
+
+EXAMPLE
+    $ require_tool.sh emacs 23
+    $ CC=g++ require_tool.sh cc 4.6
+    $ require_tool.sh zsh 4.5
+
+EOF
+}
+
+for arg in $@; do
+    case $arg in
+        -h|--help)
+            usage
+            exit 0
+            ;;
+    esac
+done
+if [ $# -gt 2 ] ; then
+    echo "ERROR: expecting 2 parameters. Please see option --help"
+    exit 1
+fi
+
+require_tool $@

package/runtime/vendor/zsh/ohmyzsh/tools/theme_chooser.sh

@@ -0,0 +1,98 @@
+#!/usr/bin/env zsh
+
+# Zsh Theme Chooser by fox (fox91 at anche dot no)
+# This program is free software. It comes without any warranty, to
+# the extent permitted by applicable law. You can redistribute it
+# and/or modify it under the terms of the Do What The Fuck You Want
+# To Public License, Version 2, as published by Sam Hocevar. See
+# http://www.wtfpl.net/txt/copying/ for more details.
+
+THEMES_DIR="$ZSH/themes"
+FAVLIST="${HOME}/.zsh_favlist"
+source $ZSH/oh-my-zsh.sh
+
+function noyes() {
+    read "a?$1 [y/N] "
+    if [[ $a == "N" || $a == "n" || $a = "" ]]; then
+        return 0
+    fi
+    return 1
+}
+
+function theme_preview() {
+    THEME=$1
+    THEME_NAME=`echo $THEME | sed s/\.zsh-theme$//`
+    print "$fg[blue]${(l.((${COLUMNS}-${#THEME_NAME}-5))..─.)}$reset_color $THEME_NAME $fg[blue]───$reset_color"
+    source "$THEMES_DIR/$THEME"
+    cols=$(tput cols)
+    (exit 1)
+    print -P "$PROMPT                                                                                      $RPROMPT"
+}
+
+function banner() {
+    echo
+    echo "╺━┓┏━┓╻ ╻   ╺┳╸╻ ╻┏━╸┏┳┓┏━╸   ┏━╸╻ ╻┏━┓┏━┓┏━┓┏━╸┏━┓"
+    echo "┏━┛┗━┓┣━┫    ┃ ┣━┫┣╸ ┃┃┃┣╸    ┃  ┣━┫┃ ┃┃ ┃┗━┓┣╸ ┣┳┛"
+    echo "┗━╸┗━┛╹ ╹    ╹ ╹ ╹┗━╸╹ ╹┗━╸   ┗━╸╹ ╹┗━┛┗━┛┗━┛┗━╸╹┗╸"
+    echo
+}
+
+function usage() {
+    echo "Usage: $0 [options] [theme]"
+    echo
+    echo "Options"
+    echo "  -l   List available themes"
+    echo "  -s   Show all themes"
+    echo "  -h   Get this help message"
+    exit 1
+}
+
+function list_themes() {
+    for THEME in $(ls $THEMES_DIR); do
+        THEME_NAME=`echo $THEME | sed s/\.zsh-theme$//`
+        echo $THEME_NAME
+    done
+}
+
+function insert_favlist() {
+    if grep -q "$THEME_NAME" $FAVLIST 2> /dev/null ; then
+        echo "Already in favlist"
+    else
+        echo $THEME_NAME >> $FAVLIST
+        echo "Saved to favlist"
+    fi
+
+}
+
+function theme_chooser() {
+    for THEME in $(ls $THEMES_DIR); do
+        echo
+        theme_preview $THEME
+        echo
+        if [[ -z $1 ]]; then
+            noyes "Do you want to add it to your favourite list ($FAVLIST)?" || \
+                  insert_favlist $THEME_NAME
+            echo
+        fi
+    done
+}
+
+while getopts ":lhs" Option
+do
+  case $Option in
+    l ) list_themes ;;
+    s ) theme_chooser 0 ;;
+    h ) usage ;;
+    * ) usage ;; # Default.
+  esac
+done
+
+if [[ -z $Option ]]; then
+    if [[ -z $1 ]]; then
+        banner
+        echo
+        theme_chooser
+    else
+        theme_preview $1".zsh-theme"
+    fi
+fi

package/runtime/vendor/zsh/ohmyzsh/tools/uninstall.sh

@@ -0,0 +1,41 @@
+if hash chsh >/dev/null 2>&1 && [ -f ~/.shell.pre-oh-my-zsh ]; then
+  old_shell=$(cat ~/.shell.pre-oh-my-zsh)
+  echo "Switching your shell back to '$old_shell':"
+  if chsh -s "$old_shell"; then
+    rm -f ~/.shell.pre-oh-my-zsh
+  else
+    echo "Could not change default shell. Change it manually by running chsh"
+    echo "or editing the /etc/passwd file."
+    exit
+  fi
+fi
+
+read -r -p "Are you sure you want to remove Oh My Zsh? [y/N] " confirmation
+if [ "$confirmation" != y ] && [ "$confirmation" != Y ]; then
+  echo "Uninstall cancelled"
+  exit
+fi
+
+echo "Removing ~/.oh-my-zsh"
+if [ -d ~/.oh-my-zsh ]; then
+  rm -rf ~/.oh-my-zsh
+fi
+
+if [ -e ~/.zshrc ]; then
+  ZSHRC_SAVE=~/.zshrc.omz-uninstalled-$(date +%Y-%m-%d_%H-%M-%S)
+  echo "Found ~/.zshrc -- Renaming to ${ZSHRC_SAVE}"
+  mv ~/.zshrc "${ZSHRC_SAVE}"
+fi
+
+echo "Looking for original zsh config..."
+ZSHRC_ORIG=~/.zshrc.pre-oh-my-zsh
+if [ -e "$ZSHRC_ORIG" ]; then
+  echo "Found $ZSHRC_ORIG -- Restoring to ~/.zshrc"
+  mv "$ZSHRC_ORIG" ~/.zshrc
+  echo "Your original zsh config was restored."
+else
+  echo "No original zsh config found"
+fi
+
+echo "Thanks for trying out Oh My Zsh. It's been uninstalled."
+echo "Don't forget to restart your terminal!"

package/runtime/vendor/zsh/ohmyzsh/tools/upgrade.sh

@@ -0,0 +1,295 @@
+#!/usr/bin/env zsh
+set +u # disable nounset
+
+local ret=0 # exit code
+
+# Protect against running with shells other than zsh
+if [ -z "$ZSH_VERSION" ]; then
+  exec zsh "$0" "$@"
+fi
+
+# Protect against unwanted sourcing
+case "$ZSH_EVAL_CONTEXT" in
+  *:file) echo "error: this file should not be sourced" && return 1 ;;
+esac
+
+# Define "$ZSH" if not defined -- in theory this should be `export`ed by the calling script
+if [[ -z "$ZSH" ]]; then
+  ZSH="${0:a:h:h}"
+fi
+
+cd "$ZSH"
+
+verbose_mode="default"
+interactive=false
+
+while getopts "v:i" opt; do
+  case $opt in
+    v)
+      if [[ $OPTARG == default || $OPTARG == minimal || $OPTARG == silent ]]; then
+        verbose_mode=$OPTARG
+      else
+        echo "[oh-my-zsh] update verbosity '$OPTARG' is not valid"
+        echo "[oh-my-zsh] valid options are 'default', 'minimal' and 'silent'"
+      fi
+      ;;
+    i) interactive=true ;;
+  esac
+done
+
+# Use colors, but only if connected to a terminal
+# and that terminal supports them.
+
+# The [ -t 1 ] check only works when the function is not called from
+# a subshell (like in `$(...)` or `(...)`, so this hack redefines the
+# function at the top level to always return false when stdout is not
+# a tty.
+if [ -t 1 ]; then
+  is_tty() {
+    true
+  }
+else
+  is_tty() {
+    false
+  }
+fi
+
+# This function uses the logic from supports-hyperlinks[1][2], which is
+# made by Kat Marchán (@zkat) and licensed under the Apache License 2.0.
+# [1] https://github.com/zkat/supports-hyperlinks
+# [2] https://crates.io/crates/supports-hyperlinks
+#
+# Copyright (c) 2021 Kat Marchán
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+supports_hyperlinks() {
+  # $FORCE_HYPERLINK must be set and be non-zero (this acts as a logic bypass)
+  if [ -n "$FORCE_HYPERLINK" ]; then
+    [ "$FORCE_HYPERLINK" != 0 ]
+    return $?
+  fi
+
+  # If stdout is not a tty, it doesn't support hyperlinks
+  is_tty || return 1
+
+  # DomTerm terminal emulator (domterm.org)
+  if [ -n "$DOMTERM" ]; then
+    return 0
+  fi
+
+  # VTE-based terminals above v0.50 (Gnome Terminal, Guake, ROXTerm, etc)
+  if [ -n "$VTE_VERSION" ]; then
+    [ $VTE_VERSION -ge 5000 ]
+    return $?
+  fi
+
+  # If $TERM_PROGRAM is set, these terminals support hyperlinks
+  case "$TERM_PROGRAM" in
+  Hyper|iTerm.app|terminology|WezTerm|vscode) return 0 ;;
+  esac
+
+  # These termcap entries support hyperlinks
+  case "$TERM" in
+  xterm-kitty|alacritty|alacritty-direct) return 0 ;;
+  esac
+
+  # xfce4-terminal supports hyperlinks
+  if [ "$COLORTERM" = "xfce4-terminal" ]; then
+    return 0
+  fi
+
+  # Windows Terminal also supports hyperlinks
+  if [ -n "$WT_SESSION" ]; then
+    return 0
+  fi
+
+  # Konsole supports hyperlinks, but it's an opt-in setting that can't be detected
+  # https://github.com/ohmyzsh/ohmyzsh/issues/10964
+  # if [ -n "$KONSOLE_VERSION" ]; then
+  #   return 0
+  # fi
+
+  return 1
+}
+
+# Adapted from code and information by Anton Kochkov (@XVilka)
+# Source: https://gist.github.com/XVilka/8346728
+supports_truecolor() {
+  case "$COLORTERM" in
+  truecolor|24bit) return 0 ;;
+  esac
+
+  case "$TERM" in
+  iterm           |\
+  tmux-truecolor  |\
+  linux-truecolor |\
+  xterm-truecolor |\
+  screen-truecolor) return 0 ;;
+  esac
+
+  return 1
+}
+
+fmt_link() {
+  # $1: text, $2: url, $3: fallback mode
+  if supports_hyperlinks; then
+    printf '\033]8;;%s\033\\%s\033]8;;\033\\\n' "$2" "$1"
+    return
+  fi
+
+  case "$3" in
+  --text) printf '%s\n' "$1" ;;
+  --url|*) fmt_underline "$2" ;;
+  esac
+}
+
+fmt_underline() {
+  is_tty && printf '\033[4m%s\033[24m\n' "$*" || printf '%s\n' "$*"
+}
+
+setopt typeset_silent
+typeset -a RAINBOW
+
+if is_tty; then
+  if supports_truecolor; then
+    RAINBOW=(
+      "$(printf '\033[38;2;255;0;0m')"
+      "$(printf '\033[38;2;255;97;0m')"
+      "$(printf '\033[38;2;247;255;0m')"
+      "$(printf '\033[38;2;0;255;30m')"
+      "$(printf '\033[38;2;77;0;255m')"
+      "$(printf '\033[38;2;168;0;255m')"
+      "$(printf '\033[38;2;245;0;172m')"
+    )
+  else
+    RAINBOW=(
+      "$(printf '\033[38;5;196m')"
+      "$(printf '\033[38;5;202m')"
+      "$(printf '\033[38;5;226m')"
+      "$(printf '\033[38;5;082m')"
+      "$(printf '\033[38;5;021m')"
+      "$(printf '\033[38;5;093m')"
+      "$(printf '\033[38;5;163m')"
+    )
+  fi
+
+  RED=$(printf '\033[31m')
+  GREEN=$(printf '\033[32m')
+  YELLOW=$(printf '\033[33m')
+  BLUE=$(printf '\033[34m')
+  BOLD=$(printf '\033[1m')
+  RESET=$(printf '\033[0m')
+fi
+
+# Update upstream remote to ohmyzsh org
+git remote -v | while read remote url extra; do
+  case "$url" in
+  git://github.com/robbyrussell/oh-my-zsh(|.git))
+    # Update out-of-date "unauthenticated git protocol on port 9418" to https
+    git remote set-url "$remote" "https://github.com/ohmyzsh/ohmyzsh.git" ;;
+  https://github.com/robbyrussell/oh-my-zsh(|.git))
+    git remote set-url "$remote" "https://github.com/ohmyzsh/ohmyzsh.git" ;;
+  git@github.com:robbyrussell/oh-my-zsh(|.git))
+    git remote set-url "$remote" "git@github.com:ohmyzsh/ohmyzsh.git" ;;
+  https://github.com/ohmyzsh/ohmyzsh(|.git)) ;;
+  git@github.com:ohmyzsh/ohmyzsh(|.git)) ;;
+  *) continue ;;
+  esac
+
+  # If we reach this point we have found the proper ohmyzsh upstream remote. If we don't,
+  # we'll only update from the set remote if `oh-my-zsh.remote` has been set to a remote,
+  # as when installing from a fork.
+  git config --local oh-my-zsh.remote "$remote"
+  break
+done
+
+# Set git-config values known to fix git errors
+# Line endings (#4069)
+git config core.eol lf
+git config core.autocrlf false
+# zeroPaddedFilemode fsck errors (#4963)
+git config fsck.zeroPaddedFilemode ignore
+git config fetch.fsck.zeroPaddedFilemode ignore
+git config receive.fsck.zeroPaddedFilemode ignore
+# autostash on rebase (#7172)
+resetAutoStash=$(git config --bool rebase.autoStash 2>/dev/null)
+git config rebase.autoStash true
+
+local ret=0
+
+# repository settings
+remote=${"$(git config --local oh-my-zsh.remote)":-origin}
+branch=${"$(git config --local oh-my-zsh.branch)":-master}
+
+# repository state
+last_head=$(git symbolic-ref --quiet --short HEAD || git rev-parse HEAD)
+# checkout update branch
+git checkout -q "$branch" -- || exit 1
+# branch commit before update (used in changelog)
+last_commit=$(git rev-parse "$branch")
+
+# Update Oh My Zsh
+if [[ $verbose_mode != silent ]]; then
+  printf "${BLUE}%s${RESET}\n" "Updating Oh My Zsh"
+fi
+if LANG= git pull --quiet --rebase $remote $branch; then
+  # Check if it was really updated or not
+  if [[ "$(git rev-parse HEAD)" = "$last_commit" ]]; then
+    message="Oh My Zsh is already at the latest version."
+  else
+    message="Hooray! Oh My Zsh has been updated!"
+
+    # Save the commit prior to updating
+    git config oh-my-zsh.lastVersion "$last_commit"
+
+    # Print changelog to the terminal
+    if [[ $interactive == true && $verbose_mode == default ]]; then
+      ZSH="$ZSH" command zsh -f "$ZSH/tools/changelog.sh" HEAD "$last_commit"
+    fi
+
+    if [[ $verbose_mode != silent ]]; then
+      printf "${BLUE}%s \`${BOLD}%s${RESET}${BLUE}\`${RESET}\n" "You can see the changelog with" "omz changelog"
+    fi
+  fi
+
+  if [[ $verbose_mode == default ]]; then
+    printf '%s         %s__      %s           %s        %s       %s     %s__   %s\n'      $RAINBOW $RESET
+    printf '%s  ____  %s/ /_    %s ____ ___  %s__  __  %s ____  %s_____%s/ /_  %s\n'      $RAINBOW $RESET
+    printf '%s / __ \\%s/ __ \\  %s / __ `__ \\%s/ / / / %s /_  / %s/ ___/%s __ \\ %s\n'  $RAINBOW $RESET
+    printf '%s/ /_/ /%s / / / %s / / / / / /%s /_/ / %s   / /_%s(__  )%s / / / %s\n'      $RAINBOW $RESET
+    printf '%s\\____/%s_/ /_/ %s /_/ /_/ /_/%s\\__, / %s   /___/%s____/%s_/ /_/  %s\n'    $RAINBOW $RESET
+    printf '%s    %s        %s           %s /____/ %s       %s     %s          %s\n'      $RAINBOW $RESET
+    printf '\n'
+    printf "${BLUE}%s${RESET}\n\n" "$message"
+    printf "${BLUE}${BOLD}%s %s${RESET}\n" "To keep up with the latest news and updates, follow us on X:" "$(fmt_link @ohmyzsh https://x.com/ohmyzsh)"
+    printf "${BLUE}${BOLD}%s %s${RESET}\n" "Want to get involved in the community? Join our Discord:" "$(fmt_link "Discord server" https://discord.gg/ohmyzsh)"
+    printf "${BLUE}${BOLD}%s %s${RESET}\n" "Get your Oh My Zsh swag at:" "$(fmt_link "CommitGoods Shop" https://commitgoods.com/collections/oh-my-zsh)"
+  elif [[ $verbose_mode == minimal ]]; then
+    printf "${BLUE}%s${RESET}\n" "$message"
+  fi
+else
+  ret=$?
+  printf "${RED}%s${RESET}\n" 'There was an error updating. Try again later?'
+fi
+
+# go back to HEAD previous to update
+git checkout -q "$last_head" --
+
+# Unset git-config values set just for the upgrade
+case "$resetAutoStash" in
+  "") git config --unset rebase.autoStash ;;
+  *) git config rebase.autoStash "$resetAutoStash" ;;
+esac
+
+# Exit with `1` if the update failed
+exit $ret

package/runtime/vendor/zsh/powerlevel10k/.gitattributes

@@ -0,0 +1,5 @@
+* text=auto
+*.zsh text eol=lf
+*.zsh-theme text eol=lf
+/prompt_powerlevel9k_setup text eol=lf
+/prompt_powerlevel10k_setup text eol=lf

package/runtime/vendor/zsh/powerlevel10k/LICENSE

@@ -0,0 +1,22 @@
+Copyright (c) 2009-2014 Robby Russell and contributors (see https://github.com/robbyrussell/oh-my-zsh/contributors)
+Copyright (c) 2014-2017 Ben Hilburn <bhilburn@gmail.com>
+Copyright (c) 2019 Roman Perepelitsa <roman.perepelitsa@gmail.com> and contributors (see https://github.com/romkatv/powerlevel10k/contributors)
+
+MIT LICENSE
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software is furnished to do so,
+subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

package/runtime/vendor/zsh/powerlevel10k/Makefile

@@ -0,0 +1,14 @@
+ZSH := $(shell command -v zsh 2> /dev/null)
+
+all:
+
+zwc:
+	$(MAKE) -C gitstatus zwc
+	$(or $(ZSH),:) -fc 'for f in *.zsh-theme internal/*.zsh; do zcompile -R -- $$f.zwc $$f || exit; done'
+
+minify:
+	$(MAKE) -C gitstatus minify
+	rm -rf -- .git .gitattributes .gitignore LICENSE Makefile README.md font.md powerlevel10k.png
+
+pkg: zwc
+	$(MAKE) -C gitstatus pkg