imhcode 1.0.0

package/skills/remotion-video-creation/rules/timing.md

@@ -0,0 +1,179 @@
+---
+name: timing
+description: Interpolation curves in Remotion - linear, easing, spring animations
+metadata:
+  tags: spring, bounce, easing, interpolation
+---
+
+A simple linear interpolation is done using the `interpolate` function.
+
+```ts title="Going from 0 to 1 over 100 frames"
+import {interpolate} from 'remotion';
+
+const opacity = interpolate(frame, [0, 100], [0, 1]);
+```
+
+By default, the values are not clamped, so the value can go outside the range [0, 1].
+Here is how they can be clamped:
+
+```ts title="Going from 0 to 1 over 100 frames with extrapolation"
+const opacity = interpolate(frame, [0, 100], [0, 1], {
+  extrapolateRight: 'clamp',
+  extrapolateLeft: 'clamp',
+});
+```
+
+## Spring animations
+
+Spring animations have a more natural motion.
+They go from 0 to 1 over time.
+
+```ts title="Spring animation from 0 to 1 over 100 frames"
+import {spring, useCurrentFrame, useVideoConfig} from 'remotion';
+
+const frame = useCurrentFrame();
+const {fps} = useVideoConfig();
+
+const scale = spring({
+  frame,
+  fps,
+});
+```
+
+### Physical properties
+
+The default configuration is: `mass: 1, damping: 10, stiffness: 100`.
+This leads to the animation having a bit of bounce before it settles.
+
+The config can be overwritten like this:
+
+```ts
+const scale = spring({
+  frame,
+  fps,
+  config: {damping: 200},
+});
+```
+
+The recommended configuration for a natural motion without a bounce is: `{ damping: 200 }`.
+
+Here are some common configurations:
+
+```tsx
+const smooth = {damping: 200}; // Smooth, no bounce (subtle reveals)
+const snappy = {damping: 20, stiffness: 200}; // Snappy, minimal bounce (UI elements)
+const bouncy = {damping: 8}; // Bouncy entrance (playful animations)
+const heavy = {damping: 15, stiffness: 80, mass: 2}; // Heavy, slow, small bounce
+```
+
+### Delay
+
+The animation starts immediately by default.
+Use the `delay` parameter to delay the animation by a number of frames.
+
+```tsx
+const entrance = spring({
+  frame: frame - ENTRANCE_DELAY,
+  fps,
+  delay: 20,
+});
+```
+
+### Duration
+
+A `spring()` has a natural duration based on the physical properties.
+To stretch the animation to a specific duration, use the `durationInFrames` parameter.
+
+```tsx
+const spring = spring({
+  frame,
+  fps,
+  durationInFrames: 40,
+});
+```
+
+### Combining spring() with interpolate()
+
+Map spring output (0-1) to custom ranges:
+
+```tsx
+const springProgress = spring({
+  frame,
+  fps,
+});
+
+// Map to rotation
+const rotation = interpolate(springProgress, [0, 1], [0, 360]);
+
+<div style={{rotate: rotation + 'deg'}} />;
+```
+
+### Adding springs
+
+Springs return just numbers, so math can be performed:
+
+```tsx
+const frame = useCurrentFrame();
+const {fps, durationInFrames} = useVideoConfig();
+
+const inAnimation = spring({
+  frame,
+  fps,
+});
+const outAnimation = spring({
+  frame,
+  fps,
+  durationInFrames: 1 * fps,
+  delay: durationInFrames - 1 * fps,
+});
+
+const scale = inAnimation - outAnimation;
+```
+
+## Easing
+
+Easing can be added to the `interpolate` function:
+
+```ts
+import {interpolate, Easing} from 'remotion';
+
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.inOut(Easing.quad),
+  extrapolateLeft: 'clamp',
+  extrapolateRight: 'clamp',
+});
+```
+
+The default easing is `Easing.linear`.
+There are various other convexities:
+
+- `Easing.in` for starting slow and accelerating
+- `Easing.out` for starting fast and slowing down
+- `Easing.inOut`
+
+and curves (sorted from most linear to most curved):
+
+- `Easing.quad`
+- `Easing.sin`
+- `Easing.exp`
+- `Easing.circle`
+
+Convexities and curves need be combined for an easing function:
+
+```ts
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.inOut(Easing.quad),
+  extrapolateLeft: 'clamp',
+  extrapolateRight: 'clamp',
+});
+```
+
+Cubic bezier curves are also supported:
+
+```ts
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.bezier(0.8, 0.22, 0.96, 0.65),
+  extrapolateLeft: 'clamp',
+  extrapolateRight: 'clamp',
+});
+```

package/skills/remotion-video-creation/rules/transcribe-captions.md

@@ -0,0 +1,19 @@
+---
+name: transcribe-captions
+description: Transcribing audio to generate captions in Remotion
+metadata:
+  tags: captions, transcribe, whisper, audio, speech-to-text
+---
+
+# Transcribing audio
+
+Remotion provides several built-in options for transcribing audio to generate captions:
+
+- `@remotion/install-whisper-cpp` - Transcribe locally on a server using Whisper.cpp. Fast and free, but requires server infrastructure.
+  <https://remotion.dev/docs/install-whisper-cpp>
+
+- `@remotion/whisper-web` - Transcribe in the browser using WebAssembly. No server needed and free, but slower due to WASM overhead.
+  <https://remotion.dev/docs/whisper-web>
+
+- `@remotion/openai-whisper` - Use OpenAI Whisper API for cloud-based transcription. Fast and no server needed, but requires payment.
+  <https://remotion.dev/docs/openai-whisper/openai-whisper-api-to-captions>

package/skills/remotion-video-creation/rules/transitions.md

@@ -0,0 +1,122 @@
+---
+name: transitions
+description: Fullscreen scene transitions for Remotion.
+metadata:
+  tags: transitions, fade, slide, wipe, scenes
+---
+
+## Fullscreen transitions
+
+Using `<TransitionSeries>` to animate between multiple scenes or clips.
+This will absolutely position the children.
+
+## Prerequisites
+
+First, the @remotion/transitions package needs to be installed.
+If it is not, use the following command:
+
+```bash
+npx remotion add @remotion/transitions # If project uses npm
+bunx remotion add @remotion/transitions # If project uses bun
+yarn remotion add @remotion/transitions # If project uses yarn
+pnpm exec remotion add @remotion/transitions # If project uses pnpm
+```
+
+## Example usage
+
+```tsx
+import {TransitionSeries, linearTiming} from '@remotion/transitions';
+import {fade} from '@remotion/transitions/fade';
+
+<TransitionSeries>
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneA />
+  </TransitionSeries.Sequence>
+  <TransitionSeries.Transition presentation={fade()} timing={linearTiming({durationInFrames: 15})} />
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneB />
+  </TransitionSeries.Sequence>
+</TransitionSeries>;
+```
+
+## Available Transition Types
+
+Import transitions from their respective modules:
+
+```tsx
+import {fade} from '@remotion/transitions/fade';
+import {slide} from '@remotion/transitions/slide';
+import {wipe} from '@remotion/transitions/wipe';
+import {flip} from '@remotion/transitions/flip';
+import {clockWipe} from '@remotion/transitions/clock-wipe';
+```
+
+## Slide Transition with Direction
+
+Specify slide direction for enter/exit animations.
+
+```tsx
+import {slide} from '@remotion/transitions/slide';
+
+<TransitionSeries.Transition presentation={slide({direction: 'from-left'})} timing={linearTiming({durationInFrames: 20})} />;
+```
+
+Directions: `"from-left"`, `"from-right"`, `"from-top"`, `"from-bottom"`
+
+## Timing Options
+
+```tsx
+import {linearTiming, springTiming} from '@remotion/transitions';
+
+// Linear timing - constant speed
+linearTiming({durationInFrames: 20});
+
+// Spring timing - organic motion
+springTiming({config: {damping: 200}, durationInFrames: 25});
+```
+
+## Duration calculation
+
+Transitions overlap adjacent scenes, so the total composition length is **shorter** than the sum of all sequence durations.
+
+For example, with two 60-frame sequences and a 15-frame transition:
+
+- Without transitions: `60 + 60 = 120` frames
+- With transition: `60 + 60 - 15 = 105` frames
+
+The transition duration is subtracted because both scenes play simultaneously during the transition.
+
+### Getting the duration of a transition
+
+Use the `getDurationInFrames()` method on the timing object:
+
+```tsx
+import {linearTiming, springTiming} from '@remotion/transitions';
+
+const linearDuration = linearTiming({durationInFrames: 20}).getDurationInFrames({fps: 30});
+// Returns 20
+
+const springDuration = springTiming({config: {damping: 200}}).getDurationInFrames({fps: 30});
+// Returns calculated duration based on spring physics
+```
+
+For `springTiming` without an explicit `durationInFrames`, the duration depends on `fps` because it calculates when the spring animation settles.
+
+### Calculating total composition duration
+
+```tsx
+import {linearTiming} from '@remotion/transitions';
+
+const scene1Duration = 60;
+const scene2Duration = 60;
+const scene3Duration = 60;
+
+const timing1 = linearTiming({durationInFrames: 15});
+const timing2 = linearTiming({durationInFrames: 20});
+
+const transition1Duration = timing1.getDurationInFrames({fps: 30});
+const transition2Duration = timing2.getDurationInFrames({fps: 30});
+
+const totalDuration = scene1Duration + scene2Duration + scene3Duration - transition1Duration - transition2Duration;
+// 60 + 60 + 60 - 15 - 20 = 145 frames
+```

package/skills/remotion-video-creation/rules/trimming.md

@@ -0,0 +1,52 @@
+---
+name: trimming
+description: Trimming patterns for Remotion - cut the beginning or end of animations
+metadata:
+  tags: sequence, trim, clip, cut, offset
+---
+
+Use `<Sequence>` with a negative `from` value to trim the start of an animation.
+
+## Trim the Beginning
+
+A negative `from` value shifts time backwards, making the animation start partway through:
+
+```tsx
+import { Sequence, useVideoConfig } from "remotion";
+
+const fps = useVideoConfig();
+
+<Sequence from={-0.5 * fps}>
+  <MyAnimation />
+</Sequence>
+```
+
+The animation appears 15 frames into its progress - the first 15 frames are trimmed off.
+Inside `<MyAnimation>`, `useCurrentFrame()` starts at 15 instead of 0.
+
+## Trim the End
+
+Use `durationInFrames` to unmount content after a specified duration:
+
+```tsx
+
+<Sequence durationInFrames={1.5 * fps}>
+  <MyAnimation />
+</Sequence>
+```
+
+The animation plays for 45 frames, then the component unmounts.
+
+## Trim and Delay
+
+Nest sequences to both trim the beginning and delay when it appears:
+
+```tsx
+<Sequence from={30}>
+  <Sequence from={-15}>
+    <MyAnimation />
+  </Sequence>
+</Sequence>
+```
+
+The inner sequence trims 15 frames from the start, and the outer sequence delays the result by 30 frames.

package/skills/remotion-video-creation/rules/videos.md

@@ -0,0 +1,171 @@
+---
+name: videos
+description: Embedding videos in Remotion - trimming, volume, speed, looping, pitch
+metadata:
+  tags: video, media, trim, volume, speed, loop, pitch
+---
+
+# Using videos in Remotion
+
+## Prerequisites
+
+First, the @remotion/media package needs to be installed.
+If it is not, use the following command:
+
+```bash
+npx remotion add @remotion/media # If project uses npm
+bunx remotion add @remotion/media # If project uses bun
+yarn remotion add @remotion/media # If project uses yarn
+pnpm exec remotion add @remotion/media # If project uses pnpm
+```
+
+Use `<Video>` from `@remotion/media` to embed videos into your composition.
+
+```tsx
+import { Video } from "@remotion/media";
+import { staticFile } from "remotion";
+
+export const MyComposition = () => {
+  return <Video src={staticFile("video.mp4")} />;
+};
+```
+
+Remote URLs are also supported:
+
+```tsx
+<Video src="https://remotion.media/video.mp4" />
+```
+
+## Trimming
+
+Use `trimBefore` and `trimAfter` to remove portions of the video. Values are in seconds.
+
+```tsx
+const { fps } = useVideoConfig();
+
+return (
+  <Video
+    src={staticFile("video.mp4")}
+    trimBefore={2 * fps} // Skip the first 2 seconds
+    trimAfter={10 * fps} // End at the 10 second mark
+  />
+);
+```
+
+## Delaying
+
+Wrap the video in a `<Sequence>` to delay when it appears:
+
+```tsx
+import { Sequence, staticFile } from "remotion";
+import { Video } from "@remotion/media";
+
+const { fps } = useVideoConfig();
+
+return (
+  <Sequence from={1 * fps}>
+    <Video src={staticFile("video.mp4")} />
+  </Sequence>
+);
+```
+
+The video will appear after 1 second.
+
+## Sizing and Position
+
+Use the `style` prop to control size and position:
+
+```tsx
+<Video
+  src={staticFile("video.mp4")}
+  style={{
+    width: 500,
+    height: 300,
+    position: "absolute",
+    top: 100,
+    left: 50,
+    objectFit: "cover",
+  }}
+/>
+```
+
+## Volume
+
+Set a static volume (0 to 1):
+
+```tsx
+<Video src={staticFile("video.mp4")} volume={0.5} />
+```
+
+Or use a callback for dynamic volume based on the current frame:
+
+```tsx
+import { interpolate } from "remotion";
+
+const { fps } = useVideoConfig();
+
+return (
+  <Video
+    src={staticFile("video.mp4")}
+    volume={(f) =>
+      interpolate(f, [0, 1 * fps], [0, 1], { extrapolateRight: "clamp" })
+    }
+  />
+);
+```
+
+Use `muted` to silence the video entirely:
+
+```tsx
+<Video src={staticFile("video.mp4")} muted />
+```
+
+## Speed
+
+Use `playbackRate` to change the playback speed:
+
+```tsx
+<Video src={staticFile("video.mp4")} playbackRate={2} /> {/* 2x speed */}
+<Video src={staticFile("video.mp4")} playbackRate={0.5} /> {/* Half speed */}
+```
+
+Reverse playback is not supported.
+
+## Looping
+
+Use `loop` to loop the video indefinitely:
+
+```tsx
+<Video src={staticFile("video.mp4")} loop />
+```
+
+Use `loopVolumeCurveBehavior` to control how the frame count behaves when looping:
+
+- `"repeat"`: Frame count resets to 0 each loop (for `volume` callback)
+- `"extend"`: Frame count continues incrementing
+
+```tsx
+<Video
+  src={staticFile("video.mp4")}
+  loop
+  loopVolumeCurveBehavior="extend"
+  volume={(f) => interpolate(f, [0, 300], [1, 0])} // Fade out over multiple loops
+/>
+```
+
+## Pitch
+
+Use `toneFrequency` to adjust the pitch without affecting speed. Values range from 0.01 to 2:
+
+```tsx
+<Video
+  src={staticFile("video.mp4")}
+  toneFrequency={1.5} // Higher pitch
+/>
+<Video
+  src={staticFile("video.mp4")}
+  toneFrequency={0.8} // Lower pitch
+/>
+```
+
+Pitch shifting only works during server-side rendering, not in the Remotion Studio preview or in the `<Player />`.

package/skills/repo-scan/SKILL.md

@@ -0,0 +1,78 @@
+---
+name: repo-scan
+description: Cross-stack source code asset audit — classifies every file, detects embedded third-party libraries, and delivers actionable four-level verdicts per module with interactive HTML reports.
+origin: community
+---
+
+# repo-scan
+
+> Every ecosystem has its own dependency manager, but no tool looks across C++, Android, iOS, and Web to tell you: how much code is actually yours, what's third-party, and what's dead weight.
+
+## When to Use
+
+- Taking over a large legacy codebase and need a structural overview
+- Before major refactoring — identify what's core, what's duplicate, what's dead
+- Auditing third-party dependencies embedded directly in source (not declared in package managers)
+- Preparing architecture decision records for monorepo reorganization
+
+## Installation
+
+```bash
+# Fetch only the pinned commit for reproducibility
+mkdir -p ~/.claude/skills/repo-scan
+git init repo-scan
+cd repo-scan
+git remote add origin https://github.com/haibindev/repo-scan.git
+git fetch --depth 1 origin 2742664
+git checkout --detach FETCH_HEAD
+cp -r . ~/.claude/skills/repo-scan
+```
+
+> Review the source before installing any agent skill.
+
+## Core Capabilities
+
+| Capability | Description |
+|---|---|
+| **Cross-stack scanning** | C/C++, Java/Android, iOS (OC/Swift), Web (TS/JS/Vue) in one pass |
+| **File classification** | Every file tagged as project code, third-party, or build artifact |
+| **Library detection** | 50+ known libraries (FFmpeg, Boost, OpenSSL…) with version extraction |
+| **Four-level verdicts** | Core Asset / Extract & Merge / Rebuild / Deprecate |
+| **HTML reports** | Interactive dark-theme pages with drill-down navigation |
+| **Monorepo support** | Hierarchical scanning with summary + sub-project reports |
+
+## Analysis Depth Levels
+
+| Level | Files Read | Use Case |
+|---|---|---|
+| `fast` | 1-2 per module | Quick inventory of huge directories |
+| `standard` | 2-5 per module | Default audit with full dependency + architecture checks |
+| `deep` | 5-10 per module | Adds thread safety, memory management, API consistency |
+| `full` | All files | Pre-merge comprehensive review |
+
+## How It Works
+
+1. **Classify the repo surface**: enumerate files, then tag each as project code, embedded third-party code, or build artifact.
+2. **Detect embedded libraries**: inspect directory names, headers, license files, and version markers to identify bundled dependencies and likely versions.
+3. **Score each module**: group files by module or subsystem, then assign one of the four verdicts based on ownership, duplication, and maintenance cost.
+4. **Highlight structural risks**: call out dead-weight artifacts, duplicated wrappers, outdated vendored code, and modules that should be extracted, rebuilt, or deprecated.
+5. **Produce the report**: return a concise summary plus the interactive HTML output with per-module drill-down so the audit can be reviewed asynchronously.
+
+## Examples
+
+On a 50,000-file C++ monorepo:
+- Found FFmpeg 2.x (2015 vintage) still in production
+- Discovered the same SDK wrapper duplicated 3 times
+- Identified 636 MB of committed Debug/ipch/obj build artifacts
+- Classified: 3 MB project code vs 596 MB third-party
+
+## Best Practices
+
+- Start with `standard` depth for first-time audits
+- Use `fast` for monorepos with 100+ modules to get a quick inventory
+- Run `deep` incrementally on modules flagged for refactoring
+- Review the cross-module analysis for duplicate detection across sub-projects
+
+## Links
+
+- [GitHub Repository](https://github.com/haibindev/repo-scan)