imhcode 1.0.0

package/skills/graphify/watch.py

@@ -0,0 +1,728 @@
+# monitor a folder and auto-trigger --update when files change
+from __future__ import annotations
+import contextlib
+import json
+import os
+import re
+import sys
+import time
+from pathlib import Path
+
+_GRAPHIFY_OUT = os.environ.get("GRAPHIFY_OUT", "graphify-out")
+
+
+@contextlib.contextmanager
+def _rebuild_lock(out_dir: Path, *, blocking: bool = False):
+    """Per-repo advisory lock around a rebuild.
+
+    Yields True if acquired, False if another rebuild is already running and
+    ``blocking`` is False. Uses fcntl.flock so the lock is released
+    automatically if the process is killed (no stale-lock cleanup needed).
+
+    While the lock is held, ``.rebuild.lock`` contains the owning PID followed
+    by a newline so external pollers (publish scripts, etc.) can read it.
+    On successful release the file is unlinked so downstream tooling that
+    waits for the lock to clear by polling for its absence unblocks promptly.
+
+    Falls back to a no-op yield(True) on platforms without fcntl (Windows).
+    """
+    try:
+        import fcntl
+    except ImportError:
+        yield True
+        return
+
+    out_dir.mkdir(parents=True, exist_ok=True)
+    lock_path = out_dir / ".rebuild.lock"
+    # "a+" creates the file if missing without truncating an existing holder's
+    # PID payload — important because another process may have already written
+    # its PID before we attempt the flock.
+    fh = open(lock_path, "a+", encoding="utf-8")
+    acquired = False
+    try:
+        flags = fcntl.LOCK_EX if blocking else (fcntl.LOCK_EX | fcntl.LOCK_NB)
+        try:
+            fcntl.flock(fh.fileno(), flags)
+        except BlockingIOError:
+            yield False
+            return
+        acquired = True
+        # Replace any prior owner's PID with ours so external readers see a
+        # single parseable line, not a digit-concatenation across rebuilds.
+        try:
+            fh.seek(0)
+            fh.truncate()
+            fh.write(f"{os.getpid()}\n")
+            fh.flush()
+        except OSError:
+            pass
+        yield True
+    finally:
+        if acquired:
+            try:
+                fcntl.flock(fh.fileno(), fcntl.LOCK_UN)
+            except OSError:
+                pass
+        fh.close()
+        # Signal "rebuild done" by removing the lock file. Only the holder
+        # unlinks; a non-acquiring caller leaves the existing lock in place.
+        if acquired:
+            with contextlib.suppress(OSError):
+                lock_path.unlink()
+
+
+def _apply_resource_limits() -> None:
+    """Best-effort nice + memory cap. Called from inline hook scripts.
+
+    GRAPHIFY_REBUILD_MEMORY_LIMIT_MB caps RSS-ish memory. Uses RLIMIT_DATA on
+    macOS (RLIMIT_AS is unreliable under Apple's libmalloc) and RLIMIT_AS on
+    Linux. Silently skips if the platform doesn't support it.
+    """
+    try:
+        os.nice(10)
+    except (OSError, AttributeError):
+        pass
+    mb = os.environ.get("GRAPHIFY_REBUILD_MEMORY_LIMIT_MB", "").strip()
+    if not mb:
+        return
+    try:
+        limit = int(mb) * 1024 * 1024
+    except ValueError:
+        return
+    try:
+        import resource
+        which = resource.RLIMIT_DATA if sys.platform == "darwin" else resource.RLIMIT_AS
+        soft, hard = resource.getrlimit(which)
+        new_hard = hard if hard != resource.RLIM_INFINITY and hard < limit else limit
+        resource.setrlimit(which, (limit, new_hard))
+    except (ImportError, ValueError, OSError):
+        pass
+
+
+def _git_head() -> str | None:
+    """Return current git HEAD commit hash, or None outside a repo."""
+    import subprocess as _sp
+    try:
+        r = _sp.run(["git", "rev-parse", "HEAD"], capture_output=True, text=True, timeout=3)
+        return r.stdout.strip() if r.returncode == 0 else None
+    except Exception:
+        return None
+
+
+from graphify.detect import (
+    CODE_EXTENSIONS,
+    DOC_EXTENSIONS,
+    PAPER_EXTENSIONS,
+    IMAGE_EXTENSIONS,
+    _load_graphifyignore,
+    _is_ignored,
+)
+
+_WATCHED_EXTENSIONS = CODE_EXTENSIONS | DOC_EXTENSIONS | PAPER_EXTENSIONS | IMAGE_EXTENSIONS
+_CODE_EXTENSIONS = CODE_EXTENSIONS
+
+
+def _report_root_label(watch_path: Path) -> str:
+    if watch_path.is_absolute():
+        return watch_path.name or str(watch_path)
+    return Path.cwd().name if watch_path == Path(".") else str(watch_path)
+
+
+def _relativize_source_files(payload: dict, root: Path) -> None:
+    for bucket in ("nodes", "edges", "hyperedges"):
+        for item in payload.get(bucket, []):
+            source = item.get("source_file")
+            if not source:
+                continue
+            source_path = Path(source)
+            if not source_path.is_absolute():
+                continue
+            try:
+                item["source_file"] = str(source_path.resolve().relative_to(root))
+            except ValueError:
+                continue
+
+
+def _node_community_map(graph_data: dict) -> dict[str, int]:
+    out: dict[str, int] = {}
+    for node in graph_data.get("nodes", []):
+        node_id = node.get("id")
+        cid = node.get("community")
+        if node_id is None or cid is None:
+            continue
+        try:
+            out[str(node_id)] = int(cid)
+        except (TypeError, ValueError):
+            print(
+                f"[graphify watch] Skipping node with invalid community id: "
+                f"node_id={node_id!r} community={cid!r}",
+                file=sys.stderr,
+            )
+            continue
+    return out
+
+
+def _canonical_graph_for_compare(graph_data: dict) -> dict:
+    canonical = dict(graph_data)
+    canonical.pop("built_at_commit", None)
+    for key in ("nodes", "links", "edges", "hyperedges"):
+        if key in canonical and isinstance(canonical[key], list):
+            canonical[key] = sorted(
+                canonical[key],
+                key=lambda item: json.dumps(item, sort_keys=True, ensure_ascii=False, default=str),
+            )
+    return canonical
+
+
+def _canonical_topology_for_compare(graph_data: dict) -> dict:
+    canonical = dict(graph_data)
+    canonical.pop("built_at_commit", None)
+
+    nodes = canonical.get("nodes")
+    if isinstance(nodes, list):
+        norm_nodes = []
+        for node in nodes:
+            if not isinstance(node, dict):
+                continue
+            n = dict(node)
+            n.pop("community", None)
+            n.pop("norm_label", None)
+            norm_nodes.append(n)
+        canonical["nodes"] = sorted(
+            norm_nodes,
+            key=lambda item: json.dumps(item, sort_keys=True, ensure_ascii=False, default=str),
+        )
+
+    for key in ("links", "edges"):
+        items = canonical.get(key)
+        if not isinstance(items, list):
+            continue
+        norm_edges = []
+        for edge in items:
+            if not isinstance(edge, dict):
+                continue
+            e = dict(edge)
+            # to_json writes _src/_tgt as the canonical directed endpoints and
+            # overwrites source/target with them before serialising, so the
+            # on-disk graph has no _src/_tgt. The candidate topology (fresh from
+            # node_link_data) still has them. Popping and reassigning here makes
+            # both sides comparable: existing gets no-op pops (None), candidate
+            # gets source/target overwritten from _src/_tgt — same result.
+            true_src = e.pop("_src", None)
+            true_tgt = e.pop("_tgt", None)
+            if true_src is not None and true_tgt is not None:
+                e["source"] = true_src
+                e["target"] = true_tgt
+            e.pop("confidence_score", None)
+            norm_edges.append(e)
+        canonical[key] = sorted(
+            norm_edges,
+            key=lambda item: json.dumps(item, sort_keys=True, ensure_ascii=False, default=str),
+        )
+
+    hyperedges = canonical.get("hyperedges")
+    if isinstance(hyperedges, list):
+        canonical["hyperedges"] = sorted(
+            hyperedges,
+            key=lambda item: json.dumps(item, sort_keys=True, ensure_ascii=False, default=str),
+        )
+
+    return canonical
+
+
+def _topology_from_graph(G) -> dict:
+    from networkx.readwrite import json_graph
+    try:
+        data = json_graph.node_link_data(G, edges="links")
+    except TypeError:
+        data = json_graph.node_link_data(G)
+    data["hyperedges"] = getattr(G, "graph", {}).get("hyperedges", [])
+    return data
+
+
+def _check_shrink(force: bool, existing_data: dict, new_data: dict, tmp: "Path | None" = None) -> bool:
+    """Return True (ok to proceed) or False (shrink refused).
+
+    When False, cleans up *tmp* if provided and prints a warning to stderr.
+    """
+    if force or not existing_data:
+        return True
+    existing_n = len(existing_data.get("nodes", []))
+    new_n = len(new_data.get("nodes", []))
+    if new_n < existing_n:
+        if tmp is not None:
+            tmp.unlink(missing_ok=True)
+        print(
+            f"[graphify] WARNING: new graph has {new_n} nodes but existing "
+            f"graph.json has {existing_n}. Refusing to overwrite — you may be "
+            f"missing chunk files from a previous session. "
+            f"Pass --force to override.",
+            file=sys.stderr,
+        )
+        return False
+    return True
+
+
+def _report_for_compare(report_text: str) -> str:
+    return re.sub(r"^- Built from commit: `[^`]+`\n?", "", report_text, flags=re.MULTILINE)
+
+
+def _json_text(data: dict) -> str:
+    return json.dumps(data, indent=2, ensure_ascii=False) + "\n"
+
+
+def _rebuild_code(
+    watch_path: Path,
+    *,
+    changed_paths: list[Path] | None = None,
+    follow_symlinks: bool = False,
+    force: bool = False,
+    no_cluster: bool = False,
+    acquire_lock: bool = True,
+    block_on_lock: bool = False,
+) -> bool:
+    """Re-run AST extraction + build + optional cluster + report for code files. No LLM needed.
+
+    When ``force`` is True the node-count safety check in ``to_json`` is bypassed
+    so the rebuilt graph overwrites graph.json even if it has fewer nodes.
+    Use this after refactors that legitimately delete code.
+
+    When ``changed_paths`` is provided, only those files are re-extracted; nodes
+    for unchanged files are preserved from the existing graph. Deleted paths
+    in ``changed_paths`` (paths that no longer exist on disk) are dropped from
+    the preserved set. When ``changed_paths`` is None the full code corpus is
+    re-extracted (used by the watcher and post-checkout hook).
+
+    ``acquire_lock`` (default True) takes a non-blocking per-repo flock around
+    the rebuild so concurrent post-commit hooks across multiple repos do not
+    pile up. Returns False with a log line if the lock is held. Pass
+    ``block_on_lock=True`` to wait instead of skip (used by the interactive
+    ``graphify update`` CLI).
+
+    ``no_cluster`` skips community detection and writes raw merged extraction
+    JSON to graphify-out/graph.json (mirrors ``extract --no-cluster``).
+
+    Returns True on success, False on error or skipped-due-to-lock.
+    """
+    out = watch_path / _GRAPHIFY_OUT
+    if acquire_lock:
+        with _rebuild_lock(out, blocking=block_on_lock) as got:
+            if not got:
+                print("[graphify watch] Rebuild already in progress for "
+                      f"{watch_path.resolve()} - skipping.")
+                return False
+            return _rebuild_code(
+                watch_path,
+                changed_paths=changed_paths,
+                follow_symlinks=follow_symlinks,
+                force=force,
+                no_cluster=no_cluster,
+                acquire_lock=False,
+            )
+
+    watch_root = watch_path.resolve()
+    project_root = Path.cwd().resolve() if not watch_path.is_absolute() else watch_root
+    report_root = _report_root_label(watch_path)
+    try:
+        from graphify.extract import extract, _get_extractor
+        from graphify.detect import detect
+        from graphify.build import build_from_json
+        from graphify.cluster import cluster, remap_communities_to_previous, score_all
+        from graphify.analyze import god_nodes, surprising_connections, suggest_questions
+        from graphify.report import generate
+        from graphify.export import to_json, to_html
+
+        detected = detect(watch_path, follow_symlinks=follow_symlinks)
+        code_files = [Path(f) for f in detected['files']['code']]
+
+        # Include document files that have AST extractors (e.g. .md, .mdx, .qmd)
+        for doc_file in detected['files'].get('document', []):
+            p = Path(doc_file)
+            if _get_extractor(p) is not None:
+                code_files.append(p)
+
+        if not code_files:
+            print("[graphify watch] No code files found - nothing to rebuild.")
+            return False
+
+        # Incremental path: when the caller passed an explicit change list,
+        # extract only changed-and-still-existing files. Deleted paths are
+        # tracked separately so their stale nodes can be evicted below.
+        deleted_paths: set[str] = set()
+        if changed_paths is not None:
+            code_set = {p.resolve() for p in code_files}
+            wanted: list[Path] = []
+            for raw in changed_paths:
+                cand = (watch_root / raw).resolve() if not raw.is_absolute() else raw.resolve()
+                if cand.exists() and cand in code_set:
+                    wanted.append(cand)
+                else:
+                    # File was deleted, renamed away, or filtered out by detect
+                    # (e.g. .gitignore, vendored). Either way, evict any
+                    # preserved nodes that still claim this source path.
+                    try:
+                        deleted_paths.add(str(cand.relative_to(project_root)))
+                    except ValueError:
+                        deleted_paths.add(str(cand))
+            if not wanted and not deleted_paths:
+                print("[graphify watch] No tracked code files in change set - skipping rebuild.")
+                return True
+            extract_targets = wanted
+        else:
+            extract_targets = code_files
+
+        commit = _git_head()
+        result = extract(extract_targets, cache_root=watch_root) if extract_targets else {
+            "nodes": [], "edges": [], "hyperedges": [],
+            "input_tokens": 0, "output_tokens": 0,
+        }
+
+        # Preserve semantic nodes/edges from a previous full run.
+        # AST-only rebuild replaces nodes for changed files; everything else is kept.
+        # Filter by node ID membership in the new AST output, not by file_type —
+        # INFERRED/AMBIGUOUS nodes extracted from code files also carry file_type="code"
+        # and would be wrongly dropped by a file_type-based filter.
+        # When the caller supplied changed_paths, also evict preserved nodes whose
+        # source_file matches a path that was changed (re-extracted) or deleted —
+        # otherwise the old nodes for those files would survive forever.
+        existing_graph = out / "graph.json"
+        existing_graph_data: dict = {}
+        if existing_graph.exists():
+            try:
+                existing = json.loads(existing_graph.read_text(encoding="utf-8"))
+                existing_graph_data = existing
+                new_ast_ids = {n["id"] for n in result["nodes"]}
+                evict_sources: set[str] = set(deleted_paths)
+                if changed_paths is not None:
+                    for p in extract_targets:
+                        try:
+                            evict_sources.add(str(p.relative_to(project_root)))
+                        except ValueError:
+                            evict_sources.add(str(p))
+                preserved_nodes = [
+                    n for n in existing.get("nodes", [])
+                    if n["id"] not in new_ast_ids
+                    and (not evict_sources or n.get("source_file") not in evict_sources)
+                ]
+                all_ids = new_ast_ids | {n["id"] for n in preserved_nodes}
+                preserved_edges = [
+                    e for e in existing.get("links", existing.get("edges", []))
+                    if e.get("source") in all_ids and e.get("target") in all_ids
+                ]
+                result = {
+                    "nodes": result["nodes"] + preserved_nodes,
+                    "edges": result["edges"] + preserved_edges,
+                    "hyperedges": existing.get("hyperedges", []),
+                    "input_tokens": 0,
+                    "output_tokens": 0,
+                }
+            except Exception:
+                pass  # corrupt graph.json - proceed with AST-only
+
+        _relativize_source_files(result, project_root)
+        out.mkdir(exist_ok=True)
+        (out / ".graphify_root").write_text(str(watch_root), encoding="utf-8")
+
+        if no_cluster:
+            # Normalise to "links" key so schema is consistent with the full clustered path.
+            candidate_graph_data = {
+                **{k: v for k, v in result.items() if k != "edges"},
+                "links": result.get("edges", []),
+            }
+            candidate_graph_text = _json_text(candidate_graph_data)
+            same_graph = False
+            if existing_graph.exists():
+                try:
+                    existing_payload = json.loads(existing_graph.read_text(encoding="utf-8"))
+                    same_graph = (
+                        json.dumps(_canonical_graph_for_compare(existing_payload), sort_keys=True, ensure_ascii=False)
+                        == json.dumps(_canonical_graph_for_compare(candidate_graph_data), sort_keys=True, ensure_ascii=False)
+                    )
+                except Exception:
+                    same_graph = False
+            if not same_graph:
+                if not _check_shrink(force, existing_graph_data, candidate_graph_data):
+                    return False
+                existing_graph.write_text(candidate_graph_text, encoding="utf-8")
+
+            try:
+                from graphify.detect import save_manifest
+                save_manifest(detected["files"], kind="ast")
+            except Exception:
+                pass
+
+            # clear stale needs_update flag if present
+            flag = out / "needs_update"
+            if flag.exists():
+                flag.unlink()
+
+            if same_graph:
+                print("[graphify watch] No code-graph changes detected (--no-cluster); outputs left untouched.")
+            else:
+                print(
+                    "[graphify watch] Rebuilt (no clustering): "
+                    f"{len(result.get('nodes', []))} nodes, {len(result.get('edges', []))} edges"
+                )
+                print(f"[graphify watch] graph.json updated in {out}")
+            return True
+
+        detection = {
+            "files": {"code": [str(f) for f in code_files], "document": [], "paper": [], "image": []},
+            "total_files": len(code_files),
+            "total_words": detected.get("total_words", 0),
+        }
+
+        G = build_from_json(result)
+        candidate_topology = _topology_from_graph(G)
+        if existing_graph_data:
+            try:
+                same_topology = (
+                    json.dumps(_canonical_topology_for_compare(existing_graph_data), sort_keys=True, ensure_ascii=False)
+                    == json.dumps(_canonical_topology_for_compare(candidate_topology), sort_keys=True, ensure_ascii=False)
+                )
+            except Exception:
+                same_topology = False
+            if same_topology:
+                try:
+                    from graphify.detect import save_manifest
+                    save_manifest(detected["files"], kind="ast")
+                except Exception:
+                    pass
+                flag = out / "needs_update"
+                if flag.exists():
+                    flag.unlink()
+                print("[graphify watch] No code-graph topology changes detected; outputs left untouched.")
+                return True
+
+        communities = cluster(G)
+        previous_node_community = _node_community_map(existing_graph_data)
+        if previous_node_community:
+            communities = remap_communities_to_previous(communities, previous_node_community)
+        cohesion = score_all(G, communities)
+        gods = god_nodes(G)
+        surprises = surprising_connections(G, communities)
+        labels_file = out / ".graphify_labels.json"
+        try:
+            raw = json.loads(labels_file.read_text(encoding="utf-8")) if labels_file.exists() else {}
+            labels = {int(k): v for k, v in raw.items() if int(k) in communities}
+        except Exception:
+            raw = {}
+            labels = {}
+        for cid in communities:
+            if cid not in labels:
+                labels[cid] = "Community " + str(cid)
+        questions = suggest_questions(G, communities, labels)
+        report = generate(G, communities, cohesion, labels, gods, surprises, detection,
+                          {"input": 0, "output": 0}, report_root, suggested_questions=questions,
+                          built_at_commit=commit)
+        report_path = out / "GRAPH_REPORT.md"
+        labels_json = json.dumps({str(k): v for k, v in sorted(labels.items())}, ensure_ascii=False, indent=2) + "\n"
+        graph_tmp = out / ".graph.tmp.json"
+        json_written = to_json(G, communities, str(graph_tmp), force=True, built_at_commit=commit)
+        if not json_written:
+            return False
+        candidate_graph_data = json.loads(graph_tmp.read_text(encoding="utf-8"))
+        same_graph = False
+        same_report = False
+        if existing_graph.exists():
+            try:
+                existing_payload = json.loads(existing_graph.read_text(encoding="utf-8"))
+                same_graph = (
+                    json.dumps(_canonical_graph_for_compare(existing_payload), sort_keys=True, ensure_ascii=False)
+                    == json.dumps(_canonical_graph_for_compare(candidate_graph_data), sort_keys=True, ensure_ascii=False)
+                )
+            except Exception:
+                same_graph = False
+        if report_path.exists():
+            old_report = report_path.read_text(encoding="utf-8")
+            same_report = _report_for_compare(old_report) == _report_for_compare(report)
+        no_change = same_graph and same_report
+        if no_change:
+            graph_tmp.unlink(missing_ok=True)
+            print("[graphify watch] No code-graph changes detected; graph.json/GRAPH_REPORT.md left untouched.")
+        else:
+            if not _check_shrink(force, existing_graph_data, candidate_graph_data, tmp=graph_tmp):
+                return False
+            graph_tmp.replace(existing_graph)
+            report_path.write_text(report, encoding="utf-8")
+            labels_file.write_text(labels_json, encoding="utf-8")
+
+        try:
+            from graphify.detect import save_manifest
+            save_manifest(detected["files"], kind="ast")
+        except Exception:
+            pass
+
+        # to_html raises ValueError for graphs > MAX_NODES_FOR_VIZ (5000).
+        # Wrap so core outputs (graph.json + GRAPH_REPORT.md) always land.
+        html_written = False
+        if not no_change:
+            try:
+                to_html(G, communities, str(out / "graph.html"), community_labels=labels or None)
+                html_written = True
+            except ValueError as viz_err:
+                print(f"[graphify watch] Skipped graph.html: {viz_err}")
+                stale = out / "graph.html"
+                if stale.exists():
+                    stale.unlink()
+
+        # Regenerate callflow HTML if the user previously generated one —
+        # opt-in by existence so users who never ran callflow-html aren't affected.
+        callflow_files = list(out.glob("*-callflow.html"))
+        if callflow_files and not no_change:
+            try:
+                from graphify.callflow_html import write_callflow_html
+                for cf in callflow_files:
+                    write_callflow_html(
+                        graph=out / "graph.json",
+                        report=out / "GRAPH_REPORT.md",
+                        labels=out / ".graphify_labels.json",
+                        output=cf,
+                        verbose=False,
+                    )
+            except Exception as cf_err:
+                print(f"[graphify watch] callflow HTML update skipped: {cf_err}")
+
+        # clear stale needs_update flag if present
+        flag = out / "needs_update"
+        if flag.exists():
+            flag.unlink()
+
+        if not no_change:
+            print(f"[graphify watch] Rebuilt: {G.number_of_nodes()} nodes, "
+                  f"{G.number_of_edges()} edges, {len(communities)} communities")
+            products = "graph.json" + (", graph.html" if html_written else "") + " and GRAPH_REPORT.md"
+            if callflow_files:
+                products += f", {len(callflow_files)} callflow HTML"
+            print(f"[graphify watch] {products} updated in {out}")
+        return True
+
+    except Exception as exc:
+        print(f"[graphify watch] Rebuild failed: {exc}")
+        return False
+
+
+def check_update(watch_path: Path) -> bool:
+    """Check for pending semantic update flag and notify the user if set.
+
+    Cron-safe: always returns True so cron jobs do not alarm.
+    Non-code file changes (docs, papers, images) require LLM-backed
+    re-extraction via `/graphify --update` — this function only signals
+    that the update is needed.
+    """
+    flag = Path(watch_path) / _GRAPHIFY_OUT / "needs_update"
+    if flag.exists():
+        print(f"[graphify check-update] Pending non-code changes in {watch_path}.")
+        print("[graphify check-update] Run `/graphify --update` to apply semantic re-extraction.")
+    return True
+
+
+def _notify_only(watch_path: Path) -> None:
+    """Write a flag file and print a notification (fallback for non-code-only corpora)."""
+    flag = watch_path / _GRAPHIFY_OUT / "needs_update"
+    flag.parent.mkdir(parents=True, exist_ok=True)
+    flag.write_text("1", encoding="utf-8")
+    print(f"\n[graphify watch] New or changed files detected in {watch_path}")
+    print("[graphify watch] Non-code files changed - semantic re-extraction requires LLM.")
+    print("[graphify watch] Run `/graphify --update` in Claude Code to update the graph.")
+    print(f"[graphify watch] Flag written to {flag}")
+
+
+def _has_non_code(changed_paths: list[Path]) -> bool:
+    return any(p.suffix.lower() not in _CODE_EXTENSIONS for p in changed_paths)
+
+
+def watch(watch_path: Path, debounce: float = 3.0) -> None:
+    """
+    Watch watch_path for new or modified files and auto-update the graph.
+
+    For code-only changes: re-runs AST extraction + rebuild immediately (no LLM).
+    For doc/paper/image changes: writes a needs_update flag and notifies the user
+    to run /graphify --update (LLM extraction required).
+
+    debounce: seconds to wait after the last change before triggering (avoids
+    running on every keystroke when many files are saved at once).
+    """
+    try:
+        from watchdog.observers import Observer
+        from watchdog.observers.polling import PollingObserver
+        from watchdog.events import FileSystemEventHandler
+    except ImportError as e:
+        raise ImportError("watchdog not installed. Run: pip install watchdog") from e
+
+    last_trigger: float = 0.0
+    pending: bool = False
+    changed: set[Path] = set()
+
+    # Load .graphifyignore patterns ONCE at startup so the handler does not
+    # re-parse the file on every filesystem event. Watchdog's handler runs on
+    # the observer thread and is invoked for every event the OS delivers
+    # (Time Machine writes, Docker/Colima VM I/O, Spotlight indexing, …) —
+    # without this short-circuit a busy volume can saturate a CPU core
+    # discarding events one extension at a time. (gh-928)
+    watch_root_for_ignore = watch_path.resolve()
+    ignore_patterns = _load_graphifyignore(watch_root_for_ignore)
+
+    class Handler(FileSystemEventHandler):
+        def on_any_event(self, event):
+            nonlocal last_trigger, pending
+            if event.is_directory:
+                return
+            path = Path(event.src_path)
+            # Check .graphifyignore BEFORE the extension/dotfile/out filters so
+            # the cheapest short-circuit for users with broad ignore patterns
+            # (node_modules/, .venv/, build/, …) fires first. _is_ignored
+            # tolerates absolute paths outside watch_root via its internal
+            # relative_to guard, so a stray symlinked event won't raise.
+            if ignore_patterns and _is_ignored(path, watch_root_for_ignore, ignore_patterns):
+                return
+            if path.suffix.lower() not in _WATCHED_EXTENSIONS:
+                return
+            if any(part.startswith(".") for part in path.parts):
+                return
+            if _GRAPHIFY_OUT in path.parts:
+                return
+            last_trigger = time.monotonic()
+            pending = True
+            changed.add(path)
+
+    handler = Handler()
+    # Use polling observer on macOS — FSEvents can miss rapid saves in some editors
+    observer = PollingObserver() if sys.platform == "darwin" else Observer()
+    observer.schedule(handler, str(watch_path), recursive=True)
+    observer.start()
+
+    print(f"[graphify watch] Watching {watch_path.resolve()} - press Ctrl+C to stop")
+    print(f"[graphify watch] Code changes rebuild graph automatically. "
+          f"Doc/image changes require /graphify --update.")
+    print(f"[graphify watch] Debounce: {debounce}s")
+
+    try:
+        while True:
+            time.sleep(0.5)
+            if pending and (time.monotonic() - last_trigger) >= debounce:
+                pending = False
+                batch = list(changed)
+                changed.clear()
+                print(f"\n[graphify watch] {len(batch)} file(s) changed")
+                has_non_code = _has_non_code(batch)
+                has_code = any(p.suffix.lower() in _CODE_EXTENSIONS for p in batch)
+                if has_code:
+                    _rebuild_code(watch_path)
+                if has_non_code:
+                    _notify_only(watch_path)
+    except KeyboardInterrupt:
+        print("\n[graphify watch] Stopped.")
+    finally:
+        observer.stop()
+        observer.join()
+
+
+if __name__ == "__main__":
+    import argparse
+    parser = argparse.ArgumentParser(description="Watch a folder and auto-update the graphify graph")
+    parser.add_argument("path", nargs="?", default=".", help="Folder to watch (default: .)")
+    parser.add_argument("--debounce", type=float, default=3.0,
+                        help="Seconds to wait after last change before updating (default: 3)")
+    args = parser.parse_args()
+    watch(Path(args.path), debounce=args.debounce)