ilabs-flir 2.0.3 → 2.0.4

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRIsotherms.h

@@ -1,208 +0,0 @@
-//
-//  FLIRIsotherms.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-04-28.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import <UIKit/UIKit.h>
-
-#import "FLIRThermalValue.h"
-
-/**  Blending mode to for isotherm with single color */
-typedef NS_ENUM(NSInteger, FLIRIsothermBlendingMode) {
-    /**  Use a single color for the isotherm. */
-    BM_solid,
-
-    /**  Use a transparent isotherm. */
-    BM_transparent,
-
-    /**  Use the Y (in YCbCr) value from the palette underneath the isotherm. */
-    BM_followY,
-
-    /**  Link several isotherms by their Y value (in YCbCr). */
-    BM_linkedY,
-
-};
-
-@class FLIRIsotherm;
-@class FLIRAboveIsotherm;
-@class FLIRBelowIsotherm;
-@class FLIRIntervalIsotherm;
-@class FLIRHumidityIsotherm;
-@class FLIRInsulationIsotherm;
-
-/**
- * fillmode properties of an isotherm
- * @note to change an isotherm, @ref setFillmode must be called after changing properties here
- * */
-@interface FLIRIsothermFillmode : NSObject
-
-/**  palette, a list of colors used for the isotherm, if this is nil, the preset color or color with blending mode is used instead */
-@property (nonatomic, retain, nullable) NSArray<UIColor*>* palette;
-/**  color, not used if palette is set */
-@property (nonatomic, retain, nullable) UIColor* color;
-/**  blending mode, note used if palette is set */
-@property (nonatomic, assign) FLIRIsothermBlendingMode blendingMode;
-
-@end
-
-/**  an interface to the isotherms defined for the image */
-@interface FLIRIsotherms : NSObject
-
-/**  add an isotherm with below cutoff */
-- (FLIRBelowIsotherm * _Nonnull)addBelowWithCutoff:(FLIRThermalValue * _Nonnull)cutoff
-                                          fillMode:(FLIRIsothermFillmode * _Nonnull)fillMode;
-/**  add an isotherm with above cutoff */
-- (FLIRAboveIsotherm * _Nonnull)addAboveWithCutoff:(FLIRThermalValue * _Nonnull)cutoff
-                                          fillMode:(FLIRIsothermFillmode * _Nonnull)fillMode;
-/**  add an isotherm with interval */
-- (FLIRIntervalIsotherm * _Nonnull)addIntervalWithMin:(FLIRThermalValue * _Nonnull)min
-                                                  max:(FLIRThermalValue * _Nonnull)max
-                                             fillMode:(FLIRIsothermFillmode * _Nonnull)fillMode;
-/**  add a humidity point isotherm
- */
-- (FLIRHumidityIsotherm * _Nonnull)addWithAirHumidity:(float)airHumidity
-                                airHumidityAlarmLevel:(float)airHumidityAlarmLevel
-                               atmosphericTemperature:(FLIRThermalValue * _Nonnull)atmosphericTemperature
-                                             fillMode:(FLIRIsothermFillmode * _Nonnull)fillMode;
-
-/**  add an insulation isotherm
- */
-
-- (FLIRInsulationIsotherm * _Nonnull)addInsulationWithIndoorAirTemperature:(FLIRThermalValue * _Nonnull)indoorAirTemperature
-                                                     outdoorAirTemperature:(FLIRThermalValue * _Nonnull)outdoorAirTemperature
-                                                          insulationFactor:(float)insulationFactor
-                                                                  fillMode:(FLIRIsothermFillmode * _Nonnull)fillMode;
-
-/**  remove an isotherm
- */
-- (void)remove:(FLIRIsotherm * _Nonnull)isotherm;
-
-/**  remove all isotherms
- */
-- (void)removeAll;
-
-/**  all isotherms for the image
- */
-- (NSArray<FLIRIsotherm *> * _Nonnull)getAll;
-
-/**  number of isotherms
- */
-@property (nonatomic, readonly) NSUInteger count;
-
-@end
-
-/**  an object with isotherm properties
- */
-@interface FLIRIsotherm : NSObject
-
-/**  the fillmode of the isotherm
- */
-@property (nonatomic, nonnull) FLIRIsothermFillmode* fillMode;
-
-@end
-
-@interface FLIRCutoffIsotherm : FLIRIsotherm
-
-/**  cutoff temperature
- */
-@property (nonatomic, nonnull) FLIRThermalValue* cutoff;
-
-@end
-
-/**
- *  An isotherm that is covering an area starting at the cutoff and above that temperature.
- */
-@interface FLIRAboveIsotherm : FLIRCutoffIsotherm
-@end
-
-/**
- *  An isotherm that is covering an area starting at the cutoff and below that temperature.
- */
-@interface FLIRBelowIsotherm : FLIRCutoffIsotherm
-@end
-
-/**
- *  An isotherm that is covering an area between the defined min and max temperature.
- */
-@interface FLIRIntervalIsotherm : FLIRIsotherm
-
-/**  min temperature
- */
-@property (nonatomic, retain, nonnull) FLIRThermalValue* min;
-
-/**  max temperature
- */
-@property (nonatomic, retain, nonnull) FLIRThermalValue* max;
-
-@end
-
-/**
- *  The humidity isotherm can detect areas where there is a risk of mold growing, or where there is a
- *  risk of the humidity falling out as liquid water (i.e., the dew point).
- */
-@interface FLIRHumidityIsotherm : FLIRIsotherm
-
-/**  air humidity in percent (0.0 - 100.0).
- */
-@property (nonatomic, assign) float airHumidity;
-
-/**  air humidity alarm level in percent (0.0 - 100.0)
- */
-@property (nonatomic, assign) float airHumidityAlarmLevel;
-
-/**  atmospheric temperature
- */
-@property (nonatomic, assign, nonnull) FLIRThermalValue *atmosphericTemperature;
-
-
-/**  Get the calculated dew point temperature.
- */
-@property (nonatomic, readonly, nonnull) FLIRThermalValue *dewPointTemperature;
-
-/**  Get the calculated dew point temperature threshold.
- */
-@property (nonatomic, readonly, nonnull) FLIRThermalValue *thresholdTemperature;
-
-@end
-
-/**
- *  The insulation isotherm can detect areas where there may be an insulation deficiency in the building.
- *  * It will trigger when the insulation level falls below a preset value of the energy leakage through the
- *  * building structure - the so-called thermal index/insulation factor. Different building codes recommend different values
- *  * for the thermal index/insulation factor, but typical values are 60 - 80% for new buildings.
- *  * Refer to your national building code for recommendations.
- */
-@interface FLIRInsulationIsotherm : FLIRIsotherm
-
-/**  indoor air temperature
- */
-@property (nonatomic, retain, nonnull) FLIRThermalValue *indoorAirTemperature;
-/**  outdoor air temperature
- */
-@property (nonatomic, retain, nonnull) FLIRThermalValue *outdoorAirTemperature;
-
-/**  insulation factor in percent (0.0 - 100.0).
- */
-@property (nonatomic, assign) float insulationFactor;
-
-/**  Get the calculated insulation temperature.
- */
-@property (nonatomic, readonly, nonnull) FLIRThermalValue *insulationTemperature;
-
-/**
- *  Calculate the insulation temperature.
- *  @param indoorAirTemp    Indoor air temperature in Kelvin.
- *  @param outdoorAirTemp    Outdoor air temperature in Kelvin.
- *  @param insulationFactor    Insulation factor (0.0 - 1.0).
- *  @return Insulation temperature in Kelvin
- */
-+ (float)calculateInsulationTempIndoorAirTemp:(float)indoorAirTemp
-                               outdoorAirTemp:(float)outdoorAirTemp
-                             insulationFactor:(float)insulationFactor;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRMeasurementArea.h

@@ -1,38 +0,0 @@
-//
-//  FLIRMeasurementArea.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import "FLIRMeasurementMarker.h"
-
-@class FLIRMeasurementDimensions;
-
-/**
- *  Represents a measurement area object.
- */
-@interface FLIRMeasurementArea : FLIRMeasurementMarker
-
-/**
- *  Gets the width of this measurement object.
- */
-@property (nonatomic, readonly) int width;
-
-/**
- *  Gets the height of this measurement object.
- */
-@property (nonatomic, readonly) int height;
-
-/**
- *  Gets the measurement area dimensions
- */
-- (FLIRMeasurementDimensions * _Nullable)getMeasurementDimensions;
-
-/**
- *  Set or get the flag for area calculations
- */
-
-@property (nonatomic, assign) BOOL areaCalc;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRMeasurementCollection.h

@@ -1,147 +0,0 @@
-//
-//  MeasurementCollection.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import "FLIRMeasurementSpot.h"
-#import "FLIRMeasurementRectangle.h"
-#import "FLIRMeasurementEllipse.h"
-#import "FLIRMeasurementLine.h"
-#import "FLIRMeasurementDelta.h"
-#import "FLIRMeasurementReference.h"
-
-/**
- *  Container for a different type of MeasurementShapes.
- *  It provides access to all measurements added to an image.
- *  It also allows to add a new measurements to an existing image.
- *  The collection is obtained FLIRThermalImage.Measurements.
- */
-@interface FLIRMeasurementCollection : NSObject
-
-/**
- *  Gets all measurement ellipses
- */
-- (NSArray<FLIRMeasurementEllipse *> * _Nonnull)getAllEllipses;
-
-/**
- *  Gets all measurement lines
- */
-- (NSArray<FLIRMeasurementLine *> * _Nonnull)getAllLines;
-
-/**
- *  Gets all measurement rectangles
- */
-- (NSArray<FLIRMeasurementRectangle *> * _Nonnull)getAllRectangles;
-
-/**
- *  Gets all measurement spots
- */
-- (NSArray<FLIRMeasurementSpot *> * _Nonnull)getAllSpots;
-
-/**
- *  Gets all measurement deltas
- */
-- (NSArray<FLIRMeasurementDelta *> * _Nonnull)getAllDeltas;
-
-/**
- *  Gets all measurement references
- */
-- (NSArray<FLIRMeasurementReference *> * _Nonnull)getAllReferences;
-
-/**
- *  Adds a new MeasurementSpot to the collection.
- *
- *  @param point The location of the spot.
- *
- *  @return The MeasurementSpot object added to the collection.
- */
-- (FLIRMeasurementSpot * _Nullable)addSpot:(CGPoint)point
-                                     error:(out NSError * _Nullable * _Nullable)error;
-
-
-/**
- *  Adds a new MeasurementRectangle to the collection.
- *
- *  @param rect The MeasurementRectangles position and size
- *  @return FLIRMeasurementRectangle
- */
-- (FLIRMeasurementRectangle * _Nullable)addRectangle:(CGRect)rect
-                                               error:(out NSError * _Nullable * _Nullable)error;
-
-
-/**
- *  Adds a new MeasurementEllipse to the collection.
- *
- *  @param position Center position of the ellipse
- *  @param radiusX Horizontal radius of the ellipse
- *  @param radiusY Vertical radius of the ellipse
- *  @return FLIRMeasurementEllipse
- */
-- (FLIRMeasurementEllipse * _Nullable)addEllipse:(CGPoint)position
-                                         radiusX:(int)radiusX
-                                         radiusY:(int)radiusY
-                                           error:(out NSError * _Nullable * _Nullable)error;
-
-
-/**
- *  Adds a new MeasurementLine to the collection.
- *
- *  @param y y position of the line
- *  @return FLIRMeasurementLine
- */
-- (FLIRMeasurementLine * _Nullable)addHorizontalLine:(int)y
-                                               error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Adds a new MeasurementLine to the collection.
- *
- *  @param x x position of the line
- *  @return FLIRMeasurementLine
- */
-- (FLIRMeasurementLine * _Nullable)addVerticalLine:(int)x
-                                             error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Adds a new MeasurementLine to the collection.
- *
- *  @param from starting point
- *  @param to ending point
- *  @return FLIRMeasurementLine
- */
-- (FLIRMeasurementLine * _Nullable)addLineFrom:(CGPoint)start
-                                            to:(CGPoint)end
-                                         error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Adds a new MeasurementDelta to the collection
- *  @param member1
- *  @param member1DeltaValueType
- *  @param member2
- *  @param member2DeltaValueType
- *  @return FLIRMeasurementDelta
- */
-- (FLIRMeasurementDelta * _Nullable)addMeasurementDeltaMember1:(FLIRMeasurementShape * _Nonnull)member1
-                                              member1DeltaType:(DeltaMemberValueType)member1DeltaValueType
-                                                       member2:(FLIRMeasurementShape * _Nonnull)member2
-                                              member2DeltaType:(DeltaMemberValueType)member2DeltaValueType
-                                                         error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Adds a new MeasurementReference to the collection
- *  @param value the thermal alue for the reference
- *  @return FLIRMeasurementReference
- */
-- (FLIRMeasurementReference * _Nullable)addReference:(FLIRThermalValue * _Nonnull)value
-                                               error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Removes the specified measurement shape from the collection.
- *
- *  @param shape The Measurement shape (line, spot, rectangle or ellipse)
- *  @return true if shape removed (i.e. the shape was in the collection)
- */
-- (BOOL)remove:(FLIRMeasurementShape * _Nonnull)shape
-         error:(out NSError * _Nullable * _Nullable)error;
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRMeasurementDelta.h

@@ -1,62 +0,0 @@
-//
-//  FLIRMeasurementDelta.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-12-08.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import "FLIRMeasurementShape.h"
-#import "FLIRThermalDelta.h"
-
-NS_ASSUME_NONNULL_BEGIN
-
-/**
- *  Class representing a delta measurement type in the image.
- */
-@interface FLIRMeasurementDelta : FLIRMeasurementShape
-
-/**
- *  Thermal difference/delta value.
- */
-- (FLIRThermalDelta * _Nullable)getDeltaValue:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets the first shape.
- */
-- (FLIRMeasurementShape *)getMember1;
-
-/**
- *  Gets the second shape.
- */
-- (FLIRMeasurementShape *)getMember2;
-
-/**
- *  Gets the first delta member type.
- */
-- (DeltaMemberValueType)getMember1ValueType;
-
-/**
- *  Gets the second delta member type.
- */
-- (DeltaMemberValueType)getMember2ValueType;
-
-/**
- *  Sets the first delta member.
- */
-- (BOOL)setMember1:(FLIRMeasurementShape *)shape
-              type:(DeltaMemberValueType)type
-             error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Sets the second delta member.
- */
-- (BOOL)setMember2:(FLIRMeasurementShape *)shape
-              type:(DeltaMemberValueType)type
-             error:(out NSError * _Nullable * _Nullable)error;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRMeasurementDimensions.h

@@ -1,33 +0,0 @@
-//
-//  FLIRMeasurementDimensions.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-11-05.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-/**
- * Describes area calculation for specified measurement tool.
- * Note: Some fields are only applicable for specific measurement tools. See description for each field for details.
- * Note: When field is unapplicable for a specified measurement type, field's value will evaluate to default value of 0.0.
- */
-@interface FLIRMeasurementDimensions : NSObject
-
-/** Area dimension value - only applicable for rectangle and ellipse (evaluates to 0.0 for other types) */
-@property (nonatomic, readonly) double area;
-/** Height dimension value - only applicable for rectangle (evaluates to 0.0 for other types) */
-@property (nonatomic, readonly) double height;
-/** Width dimension value - only applicable for rectangle (evaluates to 0.0 for other types) */
-@property (nonatomic, readonly) double width;
-/** Length dimension value - only applicable for line (evaluates to 0.0 for other types) */
-@property (nonatomic, readonly) double length;
-/** Horizontal radius dimension value - only applicable for ellipse (evaluates to 0.0 for other types) */
-@property (nonatomic, readonly) double radiusX;
-/** Vertical radius dimension value - only applicable for ellipse (evaluates to 0.0 for other types) */
-@property (nonatomic, readonly) double radiusY;
-/** Dimension status - true when calculation is valid and accurate, otherwise false */
-@property (nonatomic, readonly) BOOL valid;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRMeasurementEllipse.h

@@ -1,49 +0,0 @@
-//
-//  FLIRMeasurementEllipse.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2024 Teledyne FLIR. All rights reserved.
-//
-
-#import <CoreGraphics/CoreGraphics.h>
-#import "FLIRMeasurementArea.h"
-
-/**
- *  Defines the ellipse measurement tool shape.
- *  Ellipse is described by a center point and two radii, one horizontal (X) and one vertical (Y).
- *  This tool allows to measure temperature in ellipse area.
- *  It gives the possibility to find area's minimum, maximum and average temperature.
- *  There is functionality to find the exact location for minimum and maximum values.
- */
-@interface FLIRMeasurementEllipse : FLIRMeasurementArea
-
-/**
- *  Gets x,y positon, the center of the ellipse
- */
-- (CGPoint)getPosition;
-
-/**
- *  Gets radii
- */
-- (int)getRadiusX;
-- (int)getRadiusY;
-
-
-/**
- * Sets position, the center of the ellipse
- */
-
-- (BOOL)setPosition:(CGPoint)position error:(out NSError * _Nullable *_Nullable)error;
-
-/**
- * Sets radii
- */
-- (BOOL)setRadiusX:(int)radiusX radiusY:(int)radiusY error:(out NSError * _Nullable *_Nullable)error;
-
-/**
- *  Sets both position and radii
- */
-- (BOOL)setPosition:(CGPoint)position radiusX:(int)radiusX radiusY:(int)radiusY
-              error:(out NSError * _Nullable *_Nullable)error;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRMeasurementLine.h

@@ -1,66 +0,0 @@
-//
-//  FLIRMeasurementLine.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import "FLIRMeasurementArea.h"
-#import "FLIRThermalValue.h"
-
-NS_ASSUME_NONNULL_BEGIN
-/**
- *  Defines a line measurement tool shape.
- *  The SDK supports only horizontal or vertical lines.
- *  This tool allows to measure temperature in line area.
- *  It gives the possibility to find area's minimum, maximum and average temperature.
- *  There is functionality to find the exact location for minimum and maximum values.
- */
-@interface FLIRMeasurementLine : FLIRMeasurementArea
-
-/**  Set the location of a vertical line.
- *
- *  @param x    The x-coordinate where the line is placed.
- *
- *   X-coordinates should be positive values.
- */
-- (BOOL)setVerticalLine:(int)x
-                  error:(out NSError* _Nullable * _Nullable)error;
-
-/**  Set the location of a horizontal line.
- *
- *  @param y    The y-coordinate where the line is placed.
- *
- *   Y-coordinates should be positive values.
- */
-- (BOOL)setHorizontalLine:(int)y
-                    error:(out NSError* _Nullable * _Nullable)error;
-
-/**  Set line location
-*
- *  @param from starting point
- *  @param to ending point
- */
-
-- (BOOL)setLineFrom:(CGPoint)start
-                 to:(CGPoint)end
-              error:(out NSError * _Nullable * _Nullable)error;
-
-/** The start position of the line.
- *  A Point with (x,y)-coordinates. Error if point is (-1,-1).
- */
-- (CGPoint)getStartPosition;
-
-/** The end position of the line.
- *  A Point with (x,y)-coordinates. Error if point is (-1,-1).
- */
-- (CGPoint)getEndPosition;
-
-/**
- *  Return true  if the line measurement tool is horizontal.
- */
-- (BOOL)isHorizontal;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRMeasurementMarker.h

@@ -1,69 +0,0 @@
-//
-//  FLIRMeasurementMarker.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import "FLIRMeasurementShape.h"
-#import "FLIRThermalValue.h"
-
-/**
- *  Represents the marker objects of the measurement object
- */
-@interface FLIRMeasurementMarker : FLIRMeasurementShape
-
-/**
- *  Gets the average value of this measurement object.
- *  To enable average calculations isAverageEnabled must be set
- */
-@property (nonatomic,readonly) FLIRThermalValue *average;
-
-/**
- *  Gets the max value of this measurement object.
- *  To enable max calculations isHotSpotEnabled must be set
- */
-@property (nonatomic,readonly) FLIRThermalValue *max;
-
-/**
- *  Gets the min value of this measurement object.
- *  To enable min calculations isColdSpotEnabled must be set
- */
-@property (nonatomic,readonly) FLIRThermalValue *min;
-
-/**
- *  Gets the position of the hot spot on the image.
- */
-@property (nonatomic,readonly) CGPoint hotSpot;
-
-/**
- *  Gets the position of the cold spot on the image.
- */
-@property (nonatomic,readonly) CGPoint coldSpot;
-
-/**
- *  Average is enabled. The average value should be displayed in the result table as seen in the camera overlay.
- */
-@property BOOL isAverageEnabled;
-
-/**
- *  Hot Spot is enabled. The hot spot value should be displayed in the result table as seen in the camera overlay.
- */
-@property BOOL isHotSpotEnabled;
-
-/**
- *  Marker is visible. The marker glyph should be displayed as seen in the camera overlay.
- */
-@property BOOL isHotSpotVisible;
-
-/**
- *  Cold spot is enabled. The cold spot value should be displayed in the result table as seen in the camera overlay.
- */
-@property BOOL isColdSpotEnabled;
-
-/**
- *  Marker is visible. The marker glyph should be displayed as seen in the camera overlay.
- */
-@property BOOL isColdSpotVisible;
-
-@end