ilabs-flir 2.0.3 → 2.0.4

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRFocus.h

@@ -1,70 +0,0 @@
-//
-//  FLIRFocus.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-07-02.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-/**
- * Determines if camera should focus on near or far objects or control focus automatically (depending on the scene).
- */
-typedef NS_ENUM(NSUInteger, FLIRDistance) {
-    NEAR,
-    FAR,
-    AUTO
-};
-
-/**
- * Autofocus modes.
- */
-typedef NS_ENUM(NSUInteger, FLIRAutoFocusMode) {
-    /**
-     * Allows to specify focus distance parameter.
-     */
-    NORMAL,
-    /**
-     * Camera automatically and continuously manages focus.
-     */
-    CONTINUOUS
-};
-
-/**
- * Defines the focus calculation method. I.e. based on maximizing the image contrast or based on laser distance measurement.
- */
-typedef NS_ENUM(NSUInteger, FLIRCalculationMethod) {
-    /**
-     * calculation based on maximizing the image contrast
-     */
-    CONTRAST,
-    /**
-     * calculation based on laser distance measurement
-     */
-    LASER,
-    /**
-     * calculation method automatically chosen by the camera (if supported)
-     */
-    AUTOMATIC
-};
-
-/** focus settings for the camera */
-@interface FLIRFocus : NSObject
-
-/** Triggers a single autofocus / AF event. */
--(BOOL)autofocus: (out NSError * _Nullable *_Nullable)error;
-/** get distance selection */
-- (FLIRDistance)getDistance;
-/** set distance selection */
-- (BOOL)setDistance: (FLIRDistance)distance error: (out NSError * _Nullable *_Nullable)error;
-/** get autofocus mode */
-- (FLIRAutoFocusMode)getMode;
-/** set autofocus mode */
-- (BOOL)setMode: (FLIRAutoFocusMode)mode error: (out NSError * _Nullable *_Nullable)error;
-/** get focus calculation method */
-- (FLIRCalculationMethod)getCalculationMethod;
-/** set focus calculation method */
-- (BOOL)setCalculationMethod: (FLIRCalculationMethod)method error: (out NSError * _Nullable *_Nullable)error;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRFusion.h

@@ -1,192 +0,0 @@
-//
-//  FLIRFusion.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#ifndef FLIRFusion_h
-#define FLIRFusion_h
-#endif 
-
-#import "FLIRFusion.h"
-#import "FLIRThermalValue.h"
-#import "FLIRFusionTransformation.h"
-
-/**
- *  Specifies the fusion modes of the thermal image.
- */
-typedef enum FUSION_MODE
-{
-    /** Ordinary IR image. */
-    IR_MODE,
-    
-    /** 
-     * Visual image is zoomed and fused with IR image.
-     * Note: for not aligned DC image use FLIRThermalImage#getPhoto().
-     */
-    VISUAL_MODE,
-    
-    /** Picture in picture fusion, where a defined box/rectangle shape with IR image pixels is placed on top of the visual image. */
-    FUSION_PIP_MODE,
-    
-    /** IR image is blended with visual image based on the specified {@link com.flir.thermalsdk.image.ThermalValue} threshold. */
-    FUSION_THERMAL_MODE,
-    
-    /** Thermal MSX (Multi Spectral Dynamic Imaging) mode displays an infrared image where the edges of the objects are enhanced with information from the visual image. */
-    FUSION_MSX_MODE,
-    
-    /** IR image is blended with visual image based on the specified blending factor value. Use Blending mode to display a blended image that uses a mix of infrared pixels and digital photo pixels. */
-    FUSION_BLENDING_MODE,
-} /**  Specifies the fusion modes of the thermal image. */ FusionMode;
-
-/**
- *  Enumeration of the different fusion color modes.
- */
-typedef enum ColorMode
-{
-				/// <summary>
-				/// Fusion image has visual image in color.
-				/// </summary>
-				Color = 0,
-
-				/// <summary>
-				/// Fusion image has visual image in b/w.
-				/// </summary>
-				BlackAndWhite = 1
-} /** Enumeration of the different fusion color modes. */ VisualColorMode;
-
-/**
- *  This class provides functionality for image fusion.
- *
- *  @note Image fusion is a function that will merge the Thermal image with a photo depending on
- *  the selected fusion mode.
- */
-@interface FLIRFusion : NSObject
-
-/** 
- *  Set the fusion mode
- *
- *  @param mode	The fusion mode.
- */
--(void) setFusionMode: (FusionMode) mode;
-
-/**
- *  Get the fusion mode.
- *
- *  @return The fusion mode.
- */
--(FusionMode) getFusionMode;
-
-/**
- *  Defines multi-spectral fusion image mode.
- *  Thermal MSX (Multi Spectral Dynamic Imaging) mode displays an infrared image where the edges of the objects are enhanced with information from the visual image.
- *  The higher the alpha level, the more edges will be detected.
- *  Thermal image may appear a bit differently for the same MSX alpha value depending on the camera's resolution.
- *  Thus the value should be based on the expected results and visible effect, but typical and suggested values are:
- *  - FLIR ONE gen 2: 2.0 or 3.0
- *  - FLIR ONE gen 3: 8.0 or higher
- *
- *  @note Does no longer change the fusion mode.
- *  @param alpha The intensity of the MSX, indicate how much the visual image is blended with IR (valid value range: [0.0, 100.0]).
- */
--(void) setMSX: (double) alpha;
-
-/**
- * Get thermal image MSX settings.
- */
--(double) getMSX;
-
-/**
- *  Defines the fusion image mode, where Thermal image is displayed in defined area on top of the Visual image.
- *
- *  @note Does no longer change the fusion mode.
- *  @param rect The rectangle where the Thermal image will be placed inside the photo.
- */
--(void) setPictureInPicture: (CGRect) rect;
-
-/**
- *  Get the picture in picture rectangle.
- *
- *  @return Rectangle that defines the PiP position and size.
- */
-- (CGRect) getPictureInPictureRect;
-
-/**
- *  Defines the fusion image mode, where only the visual image is displayed. Settings for FusionMode Visual.
- *  This mode hides the Thermal Image, only the digital photo is displayed.
- *  Note: visual image is zoomed and fused with IR image. For not aligned DC image use FLIRThermalImage#getPhoto().
- *
- *  @note Does no longer change the fusion mode.
- *  @param mode Currently used color scheme the visual image is displayed in.
- */
--(void) setVisualOnly:(VisualColorMode) mode;
-
- /**
-  * Get thermal image visual only settings.
-  */
--(VisualColorMode) getVisualOnly;
-
-/**
- *  Defines the image fusion mode, where thermal and visual image is combined for an output image.
- *
- *  @note Does no longer change the fusion mode.
- *  @param min The minimum blending level between thermal and visual image.
- *  @param max The maximum blending level between thermal and visual image.
- */
-- (void)setThermalFusionWithMin:(FLIRThermalValue * _Nonnull)min andMax:(FLIRThermalValue * _Nonnull) max;
-
-/**
- *  Defines the image fusion mode, where thermal and visual image is combined for an output image.
- *
- *  @note Does no longer change the fusion mode.
- *  @param min The minimum blending level between thermal and visual image.
- */
-- (void)setThermalFusionWithMin:(FLIRThermalValue * _Nonnull)min;
-
-/**
- *  Defines the image fusion mode, where thermal and visual image is combined for an output image.
- *
- *  @note Does no longer change the fusion mode.
- *  @param max The maximum blending level between thermal and visual image.
- */
-- (void)setThermalFusionWithMax:(FLIRThermalValue * _Nonnull)max;
-
-/**
- * Get thermal image thermal fusion min level.
- */
-- (FLIRThermalValue * _Nonnull)getThermalFusionMin;
-
-/**
- * Get thermal image thermal fusion max level.
- */
-- (FLIRThermalValue * _Nonnull)getThermalFusionMax;
-
-
-/**
- *  Defines the fusion image mode, where Thermal image blends with the Visual image.
- *  Use Blending mode to display a blended image that uses a mix of infrared pixels and digital photo pixels.
- *  The blending level between both images can be adjusted based on the temperatures stored for the Thermal image.
- *
- *  @note Does no longer change the fusion mode.
- *  @param level The blending level between thermal and visual image. (1.0 = only IR, 0.0 = only visual).
- *  @param colorMode The color scheme the visual image is displayed in.
- */
-- (void)setBlending:(double)level ColorMode:(VisualColorMode)colorMode;
-
-/**
- * Get thermal image thermal blending level.
- */
-- (double)getBlendingLevel;
-
-/**
- * Get thermal image thermal blending colormode.
- */
-- (VisualColorMode)getBlendingColorMode;
-
-/**  Set fusion transformation. */
-- (void)setTransformation:(FLIRFusionTransformation * _Nonnull)transformation;
-
-/**  Get fusion transformation. */
-- (FLIRFusionTransformation * _Nonnull)getTransformation;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRFusionController.h

@@ -1,136 +0,0 @@
-//
-//  FLIRFusionController.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-07-02.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import <CoreGraphics/CoreGraphics.h>
-
-NS_ASSUME_NONNULL_BEGIN
-
-/**
- * Defines how fusion span level is displayed.
- */
-typedef NS_ENUM(NSUInteger, FLIRFusionSpanLevel) {
-    DC = 0,
-    IR = 1,
-    THERMAL_FUSION = 7
-};
-
-/**
- * Channel mode/type used to display live view on the camera.
- */
-typedef NS_ENUM(NSUInteger, FLIRChannelType) {
-    IR_TYPE,
-    VISUAL,
-    FUSION
-};
-
-/**
- * Definition of image's display mode. Depending on selected mode thermal or visual data is used to
- * render the image. Provides detailed information for fusion.
- */
-typedef NS_ENUM(NSUInteger, FLIRDisplayMode) {
-    /**
-     * The camera sends video in basic mode: {@link ChannelType#IR} or {@link ChannelType#VISUAL}
-     */
-    NONE,
-    /**
-     * The camera video in fusion blending mode.
-     */
-    FUSION_MODE,
-    /**
-     * The camera video in picture in picture mode.
-     */
-    PIP,
-    /**
-     * The camera video in multi-spectral image mode.
-     */
-    MSX,
-    /**
-     * Image displayed a digital.
-     */
-    DIGITAL,
-    /**
-     * Image displayed as difference.
-     */
-    DIFF,
-    /**
-     * Image displayed as blending between thermal and digital images.
-     */
-    BLENDING
-};
-
-/** a wrapper for the display mode */
-@interface FLIRMode : NSObject
-/** display mode */
-@property (nonatomic, assign) FLIRDisplayMode mode;
-@end
-
-/** fusion options for the camera */
-@interface FLIRFusionController : NSObject
-
-/** 
- * Defines the active channel on displaying image on live view on the camera.
- * This property may change dynamically after displayMode property is changed. Emulated cameras are NOT affected.
- */
-- (FLIRChannelType)getActiveChannel;
-/** 
- * Defines the active channel on displaying image on live view on the camera.
- * This property may change dynamically after displayMode property is changed. Emulated cameras are NOT affected.
- * Writing this value should be done with caution, because in order to camera physically change the mode it is also required to apply proper values to displayMode and fusionSpanLevel.
- * This is highly recommended to use displayMode only, which automatically makes sure both fusionSpanLevel and this property are set accordingly.
- * Avoid setting this property while streaming.
- */
-- (BOOL)setActiveChannel: (FLIRChannelType)activeChannel  error: (out NSError * _Nullable *_Nullable)error;
-/** subscribe to changes of the active channel (delegate method will be called when channel changes) */
-- (BOOL)subscribeActiveChannel: (out NSError * _Nullable *_Nullable)error;
-/** unsubscribe to changes of the active channel */
-- (void)unsubscribeActiveChannel;
-
-/** list valid display modes for the camera */
-- (NSArray<FLIRMode*>* _Nullable)getValidModes;
-/** get true if msx is supported */
-- (BOOL)getMsxSupported;
-/** get a rectangle for picture in picture display */
-- (CGRect)getPIPWindow;
-/** set a rectangle for picture in picture display */
-- (BOOL)setPIPWindow: (CGRect)pipWindow error: (out NSError * _Nullable *_Nullable)error;
-/** get true if fusion is always on */
-- (BOOL)getFusionAlwaysOn;
-/** get or set the display mode used */
-- (FLIRDisplayMode)getDisplayMode;
-/** get or set the display mode used */
-- (BOOL)setDisplayMode: (FLIRDisplayMode)displayMode error: (out NSError * _Nullable *_Nullable)error;
-/** 
- * Defines how fusion span level is displayed.
- * This property may change dynamically after displayMode property is changed. Emulated cameras are NOT affected.
- */
-- (FLIRFusionSpanLevel)getFusionSpanLevel;
-/** 
- * Defines how fusion span level is displayed.
- * This property may change dynamically after displayMode property is changed. Emulated cameras are NOT affected.
- * Writing this value should be done with caution, because in order to camera physically change the mode it is also required to apply proper values to displayMode and activeChannel.
- * This is highly recommended to use displayMode only, which automatically makes sure both activeChannel and this property are set accordingly.
- */
-- (BOOL)setFusionSpanLevel: (FLIRFusionSpanLevel)fusionSpanLevel error: (out NSError * _Nullable *_Nullable)error;
-
-/**
- * Set the fusion distance in meters.
- * This is only to be used to modify the fusion distance on a live stream.
- * @param distance distance to the object in meters. Range 0.1 to 10.0
- *  @param error reason for error
-*/
--(BOOL) setFusionDistance:(double) distance error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets the fusion distance in meters.
- */
--(double) getFusionDistance;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRFusionTransformation.h

@@ -1,35 +0,0 @@
-//
-//  FLIRFusionTransformation.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-03-16.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import <Foundation/Foundation.h>
-
-NS_ASSUME_NONNULL_BEGIN
-
-/**
- *  Fusion transformation settings.
- *
- *  @note setTransformation should be called after changing the fields below
- */
-@interface FLIRFusionTransformation : NSObject
-
-- (instancetype)initWithPanX:(int)panX panY:(int)panY scale:(float)scale rotation:(float)rotation;
-
-/**  Fusion horizontal panning. */
-@property (nonatomic, assign) int panX;
-/**  Fusion vertical panning. */
-@property (nonatomic, assign) int panY;
-/**  Fusion zoom factor. */
-@property (nonatomic, assign) float scale;
-/**  Fusion rotation factor clockwise in degrees. */
-@property (nonatomic, assign) float rotation;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRIdentity.h

@@ -1,264 +0,0 @@
-//
-//  FLIRIdentity.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import <ExternalAccessory/ExternalAccessory.h>
-
-/**
- *  These enums represents the possible camera interfaces.
- *
- *  In this release only the *network*, *emulator*, and *lightning* enums are implemented in FLIR Thermal SDK for iOS.
- */
-typedef NS_OPTIONS(NSUInteger, FLIRCommunicationInterface) {
-    /// no interface.
-    FLIRCommunicationInterfaceNone = 0x00,
-    
-    /// USB interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceUSB = 0x01,
-    
-    /// Network interface (wired or wireless).
-    FLIRCommunicationInterfaceNetwork = 0x02,
-    
-    /// FireWire interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceFirewire = 0x04,
-
-    /// Camera emulator interface.
-    FLIRCommunicationInterfaceEmulator = 0x08,
-    
-    /// Bluetooth wireless interface. *Note! Not (yet) implemented for iOS*
-    FLIRCommunicationInterfaceBluetooth = 0x10,
-    
-    /// Ebus interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceEbus = 0x20,
-    
-    /// USB HSI interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceUsbHsi = 0x40,
-    
-    /// iOS lightning interface.
-    FLIRCommunicationInterfaceLightning = 0x80,
-	
-    /// Built-in IR camera. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceIntegrated = 0x100,
-
-    /// FLIR ONE Wireless camera (using BLE and local WiFi).
-    FLIRCommunicationInterfaceFlirOneWireless = 0x200,
-
-    /// Custom interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceCustom = 1u << 31,
-};
-
-/**
- *  Types of FLIR cameras.
- */
-typedef NS_ENUM(NSInteger, FLIRCameraType) {
-    /// Any generic FLIR camera.
-    FLIRCameraType_generic = 0x01,
-    /// FLIR ONE pluggable camera.
-    FLIRCameraType_flirOne = 0x02,
-    /// FLIR ONE Edge wireless camera.
-    FLIRCameraType_flirOneEdge = 0x04,
-    /// FLIR ONE Edge Pro wireless camera.
-    FLIRCameraType_flirOneEdgePro = 0x08,
-	/// FLIR ONE Edge wireless camera.
-    FLIRCameraType_unknown1 = 0x10,
-    /// FLIR ONE Edge Pro wireless camera.
-    FLIRCameraType_unknown2 = 0x20,
-    /// FLIR Leia / Scout pro camera
-    FLIRCameraType_leia = 0x80,
-    /// FLIR luke camera
-    FLIRCameraType_luke = 0x100,
-    /// Unknown type of camera.
-    FLIRCameraType_unknown = 0x200
-};
-
-/// Flir one model
-typedef NS_ENUM(NSUInteger, FLIROneType)
-{
-    F1_gen3Pro,
-    F1_gen3ProLt,
-    F1_gen3Consumer,
-    F1_gen2,
-    F1_unknown,
-    F1_edge,
-    F1_edgePro
-};
-
-@class FLIRIdentity;
-
-/**
- * Adapter information.
- *
- * Describes the network interface card that discovered a camera.
- */
-@interface FLIRAdapterInfo : NSObject
-
-/// The name of the adapter.
-/// @return A string with the adapter name.
-- (nonnull NSString *) name;
-
-/// Flag telling if adapter is WiFi.
-/// @return TRUE if adapter is a WiFi adapter.
-- (BOOL) isWireless;
-
-/// The adapter MAC address.
-/// @return The MAC address of the adapter.
-- (nonnull NSString *) macAddress;
-
-/// The adapter IP address.
-/// @return The IP address of the adapter.
-- (nonnull NSString *) ipAddress;
-
-/// The adapter subnet mask address.
-/// @return The subnet mask of the adapter.
-- (nonnull NSString *) mask;
-
-@end
-
-
-/**
- * Stores the IP settings of a discovered network camera.
- */
-@interface FLIRIpSettings : NSObject
-
-/// Tthe host (camera) name
-- (nullable NSString *) hosttarget;
-
-/// The IP address of the camera.
-- (nonnull NSString *) ipAddress;
-
-/// The MAC address of the camera.
-- (nonnull NSString *) macAddress;
-
-/// The default gateway for the camera.
-- (nonnull NSString *) defaultGateway;
-
-/// The subnet mask for the camera.
-- (nonnull NSString *) subnetMask;
-
-/// The camera DHCP setting.
-/// - returns: TRUE if DHCP is enabled.
-- (BOOL) isDhcpEnabled;
-
-/// Validity of the IP settings.
-/// - returns: TRUE if ok.
-- (BOOL) isValid;
-
-/// Interface information about the IF that found the camera.
-- (nonnull FLIRAdapterInfo *) adapterInfo;
-
-@end
-
-/**
- * Represents camera device information.
- *
- * A FLIRCameraInformation object can be obtained from the FLIRRemoteControl object after a connection to a camera has been made.
- */
-@interface FLIRCameraInformation : NSObject
-
-/// The camera name, can be null.
-- (nonnull NSString *) modelName;
-
-/// The camera model name.
-- (nonnull NSString *) name;
-
-/// The camera display name.
-- (nonnull NSString *) displayName;
-
-/// The camera description.
-- (nonnull NSString *) cameraDescription;
-
-/// The camera serial number.
-- (nonnull NSString *) serialNumber;
-
-/// The camera osImageKitName. Same as osImageKitName.
-- (nonnull NSString *) osImagekitName __attribute__((deprecated("Use osImageKitName instead.")));
-
-/// The camera osImagekitName.
-- (nonnull NSString *) osImageKitName;
-
-/// The camera swCombinationVersion.
-- (nonnull NSString *) swCombinationVersion;
-
-/// The camera confKitName.
-- (nonnull NSString *) confKitName;
-
-/// The camera article.
-- (nonnull NSString *) article;
-
-/// The camera date
-- (nullable NSString *) date;
-
-/// Camera sensor width in pixels.
-- (NSInteger) width;
-
-/// Camera height in pixels.
-- (NSInteger) height;
-
-/// Camera firmware revision, could be e.g. a commit hash or version number
-- (nonnull NSString *) firmwareRevision;
-
-/// get flironetype (only valid for flir one cameras)
-- (FLIROneType)getFlirOneType;
-
-@end
-
-/**
- * Represents a Camera identity.
- *
- * Used when discovering and connecting to cameras.
- */
-@interface FLIRIdentity : NSObject
-
-/**
- * The communication interface through which the camera will be accessed.
- */
-- (FLIRCommunicationInterface) communicationInterface;
-
-/**
- * Type of the camera
- */
-- (FLIRCameraType) cameraType;
-
-/**
- * A per session unique Id for the camera
- *
- * This is ONLY unique per session, starting a new scan might make a new Id for the same camera.
- *
- * This may or may not be human-readable. It's recommended to connect to the Camera and query
- * for CameraInformation to get a descriptive camera name. See `FLIRCameraInformation`
- */
-- (nonnull NSString *) deviceId;
-
-/**
- * IP settings for a network camera.
- *
- * This field contains value if communicationInterface is CommunicationInterface::network,
- * otherwise it will be empty.
- */
-- (nullable FLIRIpSettings *)ipSettings;
-
-/**
-* Initializes FLIRIdentity object as a network camera identity.
-*
-* @param   ipAddr  the IP address of this identity.
-*/
--(instancetype _Nullable)initWithIpAddr:(nullable NSString *)ipAddr;
-
-/**
- * Initializes FLIRIdentity object as a FLIR One camera identity.
- *
- * @param   serial  the serial number to be copied into 'deviceId'.
-*/
-- (instancetype _Nullable)initWithFlirOneSerialNo:(nullable NSString *)serial;
-
-/**
- * Create emulator identity
- */
-- (instancetype _Nullable)initWithEmulatorType:(FLIRCameraType)type;
-
-@end
-