ilabs-flir 2.0.3 → 2.0.4

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRFusionTransformation.h

@@ -1,35 +0,0 @@
-//
-//  FLIRFusionTransformation.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-03-16.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import <Foundation/Foundation.h>
-
-NS_ASSUME_NONNULL_BEGIN
-
-/**
- *  Fusion transformation settings.
- *
- *  @note setTransformation should be called after changing the fields below
- */
-@interface FLIRFusionTransformation : NSObject
-
-- (instancetype)initWithPanX:(int)panX panY:(int)panY scale:(float)scale rotation:(float)rotation;
-
-/**  Fusion horizontal panning. */
-@property (nonatomic, assign) int panX;
-/**  Fusion vertical panning. */
-@property (nonatomic, assign) int panY;
-/**  Fusion zoom factor. */
-@property (nonatomic, assign) float scale;
-/**  Fusion rotation factor clockwise in degrees. */
-@property (nonatomic, assign) float rotation;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRIdentity.h

@@ -1,264 +0,0 @@
-//
-//  FLIRIdentity.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import <ExternalAccessory/ExternalAccessory.h>
-
-/**
- *  These enums represents the possible camera interfaces.
- *
- *  In this release only the *network*, *emulator*, and *lightning* enums are implemented in FLIR Thermal SDK for iOS.
- */
-typedef NS_OPTIONS(NSUInteger, FLIRCommunicationInterface) {
-    /// no interface.
-    FLIRCommunicationInterfaceNone = 0x00,
-    
-    /// USB interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceUSB = 0x01,
-    
-    /// Network interface (wired or wireless).
-    FLIRCommunicationInterfaceNetwork = 0x02,
-    
-    /// FireWire interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceFirewire = 0x04,
-
-    /// Camera emulator interface.
-    FLIRCommunicationInterfaceEmulator = 0x08,
-    
-    /// Bluetooth wireless interface. *Note! Not (yet) implemented for iOS*
-    FLIRCommunicationInterfaceBluetooth = 0x10,
-    
-    /// Ebus interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceEbus = 0x20,
-    
-    /// USB HSI interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceUsbHsi = 0x40,
-    
-    /// iOS lightning interface.
-    FLIRCommunicationInterfaceLightning = 0x80,
-	
-    /// Built-in IR camera. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceIntegrated = 0x100,
-
-    /// FLIR ONE Wireless camera (using BLE and local WiFi).
-    FLIRCommunicationInterfaceFlirOneWireless = 0x200,
-
-    /// Custom interface. *Note! Not implemented for iOS*
-    FLIRCommunicationInterfaceCustom = 1u << 31,
-};
-
-/**
- *  Types of FLIR cameras.
- */
-typedef NS_ENUM(NSInteger, FLIRCameraType) {
-    /// Any generic FLIR camera.
-    FLIRCameraType_generic = 0x01,
-    /// FLIR ONE pluggable camera.
-    FLIRCameraType_flirOne = 0x02,
-    /// FLIR ONE Edge wireless camera.
-    FLIRCameraType_flirOneEdge = 0x04,
-    /// FLIR ONE Edge Pro wireless camera.
-    FLIRCameraType_flirOneEdgePro = 0x08,
-	/// FLIR ONE Edge wireless camera.
-    FLIRCameraType_unknown1 = 0x10,
-    /// FLIR ONE Edge Pro wireless camera.
-    FLIRCameraType_unknown2 = 0x20,
-    /// FLIR Leia / Scout pro camera
-    FLIRCameraType_leia = 0x80,
-    /// FLIR luke camera
-    FLIRCameraType_luke = 0x100,
-    /// Unknown type of camera.
-    FLIRCameraType_unknown = 0x200
-};
-
-/// Flir one model
-typedef NS_ENUM(NSUInteger, FLIROneType)
-{
-    F1_gen3Pro,
-    F1_gen3ProLt,
-    F1_gen3Consumer,
-    F1_gen2,
-    F1_unknown,
-    F1_edge,
-    F1_edgePro
-};
-
-@class FLIRIdentity;
-
-/**
- * Adapter information.
- *
- * Describes the network interface card that discovered a camera.
- */
-@interface FLIRAdapterInfo : NSObject
-
-/// The name of the adapter.
-/// @return A string with the adapter name.
-- (nonnull NSString *) name;
-
-/// Flag telling if adapter is WiFi.
-/// @return TRUE if adapter is a WiFi adapter.
-- (BOOL) isWireless;
-
-/// The adapter MAC address.
-/// @return The MAC address of the adapter.
-- (nonnull NSString *) macAddress;
-
-/// The adapter IP address.
-/// @return The IP address of the adapter.
-- (nonnull NSString *) ipAddress;
-
-/// The adapter subnet mask address.
-/// @return The subnet mask of the adapter.
-- (nonnull NSString *) mask;
-
-@end
-
-
-/**
- * Stores the IP settings of a discovered network camera.
- */
-@interface FLIRIpSettings : NSObject
-
-/// Tthe host (camera) name
-- (nullable NSString *) hosttarget;
-
-/// The IP address of the camera.
-- (nonnull NSString *) ipAddress;
-
-/// The MAC address of the camera.
-- (nonnull NSString *) macAddress;
-
-/// The default gateway for the camera.
-- (nonnull NSString *) defaultGateway;
-
-/// The subnet mask for the camera.
-- (nonnull NSString *) subnetMask;
-
-/// The camera DHCP setting.
-/// - returns: TRUE if DHCP is enabled.
-- (BOOL) isDhcpEnabled;
-
-/// Validity of the IP settings.
-/// - returns: TRUE if ok.
-- (BOOL) isValid;
-
-/// Interface information about the IF that found the camera.
-- (nonnull FLIRAdapterInfo *) adapterInfo;
-
-@end
-
-/**
- * Represents camera device information.
- *
- * A FLIRCameraInformation object can be obtained from the FLIRRemoteControl object after a connection to a camera has been made.
- */
-@interface FLIRCameraInformation : NSObject
-
-/// The camera name, can be null.
-- (nonnull NSString *) modelName;
-
-/// The camera model name.
-- (nonnull NSString *) name;
-
-/// The camera display name.
-- (nonnull NSString *) displayName;
-
-/// The camera description.
-- (nonnull NSString *) cameraDescription;
-
-/// The camera serial number.
-- (nonnull NSString *) serialNumber;
-
-/// The camera osImageKitName. Same as osImageKitName.
-- (nonnull NSString *) osImagekitName __attribute__((deprecated("Use osImageKitName instead.")));
-
-/// The camera osImagekitName.
-- (nonnull NSString *) osImageKitName;
-
-/// The camera swCombinationVersion.
-- (nonnull NSString *) swCombinationVersion;
-
-/// The camera confKitName.
-- (nonnull NSString *) confKitName;
-
-/// The camera article.
-- (nonnull NSString *) article;
-
-/// The camera date
-- (nullable NSString *) date;
-
-/// Camera sensor width in pixels.
-- (NSInteger) width;
-
-/// Camera height in pixels.
-- (NSInteger) height;
-
-/// Camera firmware revision, could be e.g. a commit hash or version number
-- (nonnull NSString *) firmwareRevision;
-
-/// get flironetype (only valid for flir one cameras)
-- (FLIROneType)getFlirOneType;
-
-@end
-
-/**
- * Represents a Camera identity.
- *
- * Used when discovering and connecting to cameras.
- */
-@interface FLIRIdentity : NSObject
-
-/**
- * The communication interface through which the camera will be accessed.
- */
-- (FLIRCommunicationInterface) communicationInterface;
-
-/**
- * Type of the camera
- */
-- (FLIRCameraType) cameraType;
-
-/**
- * A per session unique Id for the camera
- *
- * This is ONLY unique per session, starting a new scan might make a new Id for the same camera.
- *
- * This may or may not be human-readable. It's recommended to connect to the Camera and query
- * for CameraInformation to get a descriptive camera name. See `FLIRCameraInformation`
- */
-- (nonnull NSString *) deviceId;
-
-/**
- * IP settings for a network camera.
- *
- * This field contains value if communicationInterface is CommunicationInterface::network,
- * otherwise it will be empty.
- */
-- (nullable FLIRIpSettings *)ipSettings;
-
-/**
-* Initializes FLIRIdentity object as a network camera identity.
-*
-* @param   ipAddr  the IP address of this identity.
-*/
--(instancetype _Nullable)initWithIpAddr:(nullable NSString *)ipAddr;
-
-/**
- * Initializes FLIRIdentity object as a FLIR One camera identity.
- *
- * @param   serial  the serial number to be copied into 'deviceId'.
-*/
-- (instancetype _Nullable)initWithFlirOneSerialNo:(nullable NSString *)serial;
-
-/**
- * Create emulator identity
- */
-- (instancetype _Nullable)initWithEmulatorType:(FLIRCameraType)type;
-
-@end
-

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRImageBase.h

@@ -1,196 +0,0 @@
-//
-//  FLIRImageBase.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#ifndef FLIRImageBase_h
-#define FLIRImageBase_h
-#endif
-
-#import <Foundation/Foundation.h>
-
-/**
- *  Indicates the altitude used as the reference altitude in the GPS information/data.
- */
-typedef NS_ENUM(NSUInteger, FLIRAltitudeReference) {
-    /// Indicates the altitude value is above sea level.
-    FLIRSeaLevel,
-
-   /// Indicates the altitude value is below sea level and the altitude is indicated as an absolute value in altitude.
-    FLIRBelowSeaLevel,
-};
-
-/**
- *  struct provides basic compass information.
- */
-typedef struct CompassInfo
-{
-    /**  Compass direction in degrees, 1-360. */
-    int degrees;
-    /**  The terminal's rotation in degrees around its own longitudinal axis, -180.0 - +180.0 . */
-    int roll;
-    /** Sensor pitch in degrees, -90 - +90. */
-    int pitch;
-    /** Compass tilt in degrees, 0-360. */
-    int tilt;
-} /** struct provides basic compass information. */ CompassInformation_t;
-
-/**
- * Defines a GPS information like latitude, longitude, etc..
- */
-typedef struct GpsInfo
-{
-    /** A value indicating whether this gps information is valid */
-    bool isValid;
-
-    /** Gps DOP (data degree of precision) */
-    float dop;
-
-    /** The altitude.
-     *
-     * If the altitude reference is below sea level, the altitude is indicated as an absolute value in altitude.
-     * The unit is meters.
-     */
-    float altitude;
-
-    /** Altitude reference indicates if the altitude value is below or above see level. */
-    FLIRAltitudeReference altitudeRef;
-
-    /** The latitude. */
-    double latitude;
-
-    /** Latitude reference
-     *
-     *  Indicates whether the latitude is north or south latitude.
-     *  The value 'N' indicates north latitude, and 'S' is south latitude.
-     */
-    __unsafe_unretained NSString *latitudeRef;
-
-    /**  The longitude */
-    double longitude;
-
-    /**  Longitude reference.
-     *
-     *   Indicates whether the longitude is east or west longitude.
-     *   The value 'E' indicates east longitude, and 'W' is west longitude.
-     */
-    __unsafe_unretained NSString *longitudeRef;
-
-    /** Map datum
-     *
-     *   Indicates the geodetic survey data used by the GPS receiver.
-     */
-    __unsafe_unretained NSString *mapDatum;
-
-    /**  The satellites
-     *
-     *    Indicates the GPS satellites used for measurements.
-     *    This tag can be used to describe the number of satellites,
-     *    their ID number, angle of elevation, azimuth, SNR and other information in ASCII notation.
-     */
-    __unsafe_unretained NSString  *satellites;
-
-    /** The time
-     *
-     *  Indicates the time as UTC (Coordinated Universal Time).
-     */
-    __unsafe_unretained NSDate *timeStamp;
-} /** Defines a GPS information like latitude, longitude, etc.. */  GpsInformation_t;
-
-
-/**
- *  Defines a clock-wise rotation angle which can be applied for a ThermalImage.
- */
-typedef NS_ENUM(NSUInteger, RotationAngle)
-{
-    /**  Image should be rotated by 180 degrees. */
-    ROTATION_ANGLE_180_DEGREES,
-
-    /**  Image should be rotated by 270 degrees. */
-    ROTATION_ANGLE_270_DEGREES,
-
-    /**  Image should be rotated by 90 degrees. */
-    ROTATION_ANGLE_90_DEGREES
-};
-
-
-/**
- *  A base definition for all FLIR images.
- *  Provides basic, common interface to handle the images within FLIR Thermal SDK regardless of their source.
- */
-@interface FLIRImageBase : NSObject
-
-
-/**
- *  Gets the width of the image in pixels.
- *  Corresponding image is a UIImage object from FLIRThermalImage#getImage(), which represents an image's colorized pixels data depending on selected FusionMode.
- *
- *  @return The width of the image.
- */
--(int) getWidth;
-
-/**
- *  Gets the height of the image in pixels.
- *  Corresponding image is a UIImage object from FLIRThermalImage#getImage(), which represents an image's colorized pixels data depending on selected FusionMode.
- *
- *  @return The height of the image.
- */
--(int) getHeight;
-
-/**
- *  Gets a CompassInformation object with compass details embedded in the image.
- *
- *  @return a CompassInformation object with compass details embedded in the image.
- */
--(CompassInformation_t) getCompassInformation;
-
-/**
- *  Sets the  compass details embedded in the image.
- *
- *  @param compass a CompassInformation_t object with compass details.
- */
--(void) setCompassInformation:(CompassInformation_t) compass;
-
-/**
- *  Gets a GpsInformation object with GPS details embedded in the image.
- *
- *  @return a GpsInformation object with GPS details embedded in the image.
- */
--(GpsInformation_t) getGpsInformation;
-
-/**
- * Sets the GPS details embedded in the image.
- *
- * @param  gps a  GpsInformation_t object with GPS details.
-*/
-
-- (void) setGpsInformation:(GpsInformation_t) gps;
-/**
- *  Rotates the image by certain angle. Only rotation by angle defined in RotationAngle is supported.
- *  This is relative rotation, meaning that rotating 0 degrees would be a no-op.
- *  @note The image pixels will be rotated instantly, so this function may incur heavy computation.
- *  @note This image rotation feature is intended to be used for still images (a file-based FLIRhermalImage). For live streaming stream rotation is currently undefined and may give unexpected results.
- *  Especially when used with enabled measurements or other FLIRThermalImage tools.
- *  If you want to rotate a live stream we recommend rotating the colorized pixels (UIImage), which were acquired i.e. by using FLIRThermalImage.getImage() function.
- *  @note Important: When rotating the colorized pixels any existing FLIRThermalImage tools (i.e. measurements) are not rotated.
- *  This means that when using measurements with rotated colorized pixels you are required to handle the difference in the displayed image and the actual FLIRThermalImage
- *  i.e. calculate the correct positions and redraw measurements when the image is rotated/flipped. This can became quite complicated and has to be addresses carefully.
- */
-- (void) rotate:(RotationAngle) angle;
-
-/**
- *  Gets a file description from EXIF data.
- *
- * @return description from EXIF data or null, if description could not be obtained.
- */
--(NSString *) getDescription;
-
-/**
- *  Sets file description in EXIF data
- *
- * @param description - the description to be set in the EXIF data.
- */
--(void) setDescription:(NSString *) description;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRImageColorizer.h

@@ -1,26 +0,0 @@
-//
-//  FLIRImageColorizer.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-10-27.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-#import "FLIRThermalImage.h"
-#import "FLIRColorizer.h"
-#import "FLIRRendererImpl.h"
-
-/**
- *  Renders still thermal images.
- *
- *  Implements the protocols FLIRColorizer and FLIRRenderer
- */
-@interface FLIRImageColorizer : FLIRRendererImpl<FLIRColorizer>
-
-/**
- *  Create a colorizer for the given thermal image
- */
-- (instancetype _Nullable)initWithImage:(FLIRThermalImage * _Nonnull)image;
-- (BOOL)update:(out NSError * _Nullable * _Nullable)error;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRImageStatistics.h

@@ -1,61 +0,0 @@
-//
-//  FLIRImageStatistics.h
-//  Spartacus
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import <CoreGraphics/CGGeometry.h>
-#import "FLIRThermalValue.h"
-#import "FLIRThermalDelta.h"
-
-/**
- *  Provides statistics for Thermal data for the ThermalImage.
- *  Defines such values as minimum, maximum and position, where they were measured, average and standard deviation.
- */
-@interface FLIRImageStatistics : NSObject
-
-/**
- *  Gets calculated Minimum temperature value.
- *
- *  @return The minimum value.
- */
-- (FLIRThermalValue * _Nonnull)getMin;
-
-/** 
- *  Gets calculated Maximum temperature value.
- *
- *  @return The maximum value.
- */
-- (FLIRThermalValue * _Nonnull)getMax;
-
-/**
- *  Gets calculated Average value of the temperature data associated with the ThermalImage.
- *
- *  @return The average value.
- */
-- (FLIRThermalValue * _Nonnull)getAverage;
-
-/**
- *  Gets calculated Standard Deviation value of the temperature data associated with the ThermalImage.
- *
- *  @return The standard deviation value.
- */
-- (FLIRThermalDelta * _Nonnull)getStandardDeviation;
-
-/**
- *  Get the position (x,y-coordinate) to the pixel with the highest temperature.
- *
- *  @return A (x,y) point.
- */
-- (CGPoint)getHotSpot;
-
-/**
- *  Get the position (x,y-coordinate) to the pixel with the lowest temperature.
- *
- *  @return A (x,y) point.
- */
-- (CGPoint)getColdSpot;
-
-@end