ilabs-flir 2.0.3 → 2.0.4

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRThermalParameters.h

@@ -1,31 +0,0 @@
-//
-//  FLIRThermalParameters.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import "FLIRThermalValue.h"
-
-/** FLIRThermalParameters */
-@interface FLIRThermalParameters : NSObject
-
-/** Gets or sets the default emissivity for the IR Image. */
-@property (nonatomic, readwrite) float objectEmissivity;
-/** Gets or sets the distance from camera to focused object. */
-@property (nonatomic, readwrite) float objectDistance;
-/** Gets or sets the reflected temperature. */
-@property (nonatomic, readwrite, nonnull) FLIRThermalValue* objectReflectedTemperature;
-/** Gets or sets the atmospheric temperature. */
-@property (nonatomic, readwrite, nonnull) FLIRThermalValue* atmosphericTemperature;
-/** Gets or sets the external optics temperature. */
-@property (nonatomic, readwrite, nonnull) FLIRThermalValue* externalOpticsTemperature;
-/** Gets or sets the external optics transmission. */
-@property (nonatomic, readwrite) float externalOpticsTransmission;
-/** Gets or sets the atmospheric transmission. */
-@property (nonatomic, readwrite) float atmosphericTransmission;
-/** Gets or sets the relative humidity (0.0 - 100.0). */
-@property (nonatomic, readwrite) float relativeHumidity;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRThermalValue.h

@@ -1,92 +0,0 @@
-//
-//  ThermalValue.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-/**  Specifies the supported temperature units. */
-typedef NS_ENUM(NSUInteger, TemperatureUnit)
-{
-    /** The Celsius temperature scale was previously known as the centigrade scale. */
-    CELSIUS,
-    /** Units in Fahrenheit. */
-    FAHRENHEIT,
-    /** The Kelvin scale is a thermodynamic (absolute) temperature scale where absolute zero, the theoretical absence of all thermal energy, is zero (0 K). */
-    KELVIN
-};
-
-/**
- *  The possible ThermalValueStates.
- */
-typedef NS_ENUM(NSUInteger, ThermalValueState) {
-    /** Value is invalid. Usually happens when calculation mask for the particular measure type (i.e. min, max, average) is not enabled. */
-    Invalid,
-    /** Value is OK. */
-    Ok,
-    /** Value is too high. */
-    Overflow,
-    /** Value is too low. */
-    Underflow,
-    /** Value is outside image. */
-    Outside,
-    /** Value is unreliable. */
-    Warning,
-    /** Value is not yet calculated, unstable image after restart/case change. */
-    Unstable,
-    /** Value is OK + compensated with a reference temperature delta. */
-    Delta,
-}; // ThermalValueState;
-
-/**
- *  This class represents an IR value with additional information.
- */
-@interface FLIRThermalValue : NSObject
-
-/**
- * Initialize an "OK" thermal value with specified temperature value and unit
- *
- * @param value Temperature value.
- * @param unit Temperature unit.
- */
-- (instancetype)initWithValue:(double) value andUnit:(TemperatureUnit) unit;
-
-/**
- *  Gets the value.
- */
-@property (readonly) double value;
-
-/**
- *  Gets the temperature unit of the value.
- */
-@property (readonly) TemperatureUnit unit;
-
-/**
- *  Gets the state of the value.
- */
-@property (readonly) ThermalValueState state;
-
-/**
- *  Gets a nicely formatted string representing the value.
- */
-- (NSString *)description;
-
-/** @brief Convenience function to test if two @ref FLIRThermalValue "ThermalValues" practically the same temperature with imprecise floating-point comparison.
- *  @param other The second (right hand side) value to compare.
- *  @param absError The margin of error in degrees Kelvin.
- */
-- (BOOL)areNear:(id)other absError: (double)absError;
-
-/** @brief Return the corresponding thermal value in another unit */
-- (FLIRThermalValue*)asCelsius;
-
-/** @brief Return the corresponding thermal value in another unit */
-- (FLIRThermalValue*)asKelvin;
-
-/** @brief Return the corresponding thermal value in another unit */
-- (FLIRThermalValue*)asFahrenheit;
-
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRWirelessCameraDetails.h

@@ -1,88 +0,0 @@
-//
-//  FLIRWirelessCameraDetails.h
-//  ThermalSDK
-//
-//  Created by Teledyne on 2022-08-24.
-//  Copyright © 2022 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-#import "FLIRIdentity.h"
-
-NS_ASSUME_NONNULL_BEGIN
-@class FLIRWirelessCameraDetails;
-
-@protocol FLIRWirelessCameraDetailsEventDelegate <NSObject>
--(void) detailsUpdated:(FLIRWirelessCameraDetails *) wcd;
-@end
-
-typedef NS_ENUM(NSInteger, FLIRSignalStrength) {
-    /**
-     * @brief State in which it is possible to discover the camera.
-     * @note after discovery phrase camera can be moved further away from the phone and still it will be possible to connect and stream.
-     */
-    discoverable,
-    /** @brief Good signal, allows to live stream and interact with the camera. */
-    excellent,
-    /** @brief Signal strength is fair enough for live streaming and interaction with the camera. Minor frame drops or lag/delay may occur. */
-    fair,
-    /** @brief Weak signal may result in significant frame drops and delays in communication with the camera. */
-    weak,
-    /** @brief Bad signal will eventually result in a connection break or timeout and it will most likely be impossible to get a live stream or interact with the camera. */
-    bad_distance
-};
-
-@interface FLIRWirelessCameraDetails : NSObject
-
-/// SSID/name of the FLIR ONE WiFi network.
-@property (nonatomic, readonly) NSString* ssid;
-
-/// Password for the FLIR ONE WiFi network.
-@property (nonatomic, readonly) NSString* password;
-
-/// The IP address of the F1 wireless camera i.e. 192.168.1.1.
-@property (nonatomic, readonly) NSString* ipAddress;
-
-/// Camera's firmware version.
-@property (nonatomic, readonly) NSString* firmwareVersion;
-
-/// Camera's serial number.
-@property (nonatomic, readonly) NSString* serialNumber;
-
-/// Flag determining if this is the first time setup/connection.
-@property (nonatomic, readonly) BOOL firstTimeSetupFlag;
-
-/// The transmit power in dBm. Valid range is [-127, 126]. A value of 127 (0x7F) indicates that the TX power is not present.
-@property (nonatomic, readonly) NSInteger txPowerLevel;
-
-/// Returns the received signal strength in dBm. The valid range is [-127, 126].
-@property (nonatomic, readonly) NSInteger rssi;
-
-/// Returns the distance.
-@property (nonatomic, readonly) FLIRSignalStrength signal;
-
-/// Flag determining if the default password has changed.
-@property (nonatomic, readonly) BOOL passwordChangedFlag;
-
-/// Camera's current battery level.
-@property (nonatomic, readonly) NSInteger batteryLevel;
-
-/// Camera's current battery state - charging or not.
-@property (nonatomic, readonly) NSInteger batteryCharging;
-
-/// Determines if there are active connections to the camera's WiFi network.
-@property (nonatomic, readonly) NSInteger ConnectedFlag;
-
-/// Delegate that will receive changes, useful to check distance between device and camera
-@property (nonatomic, retain, nullable) id<FLIRWirelessCameraDetailsEventDelegate> delegate;
-
-@property (nonatomic, readonly) NSInteger wifiMode;
-
-@property (nonatomic, readonly) FLIRCameraType cameraType;
-
-@end
-
-
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/ThermalSDK.h

@@ -1,74 +0,0 @@
-//
-//  ThermalSDK.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019-2024 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import <UIKit/UIKit.h>
-
-//! Project version number for ThermalSDK.
-FOUNDATION_EXPORT const double ThermalSDKVersionNumber;
-
-//! Project version string for ThermalSDK.
-FOUNDATION_EXPORT const char *ThermalSDKVersionString;
-
-//! Project commit hash string for ThermalSDK.
-FOUNDATION_EXPORT const char *ThermalSDKCommitHash;
-
-
-// In this header, you should import all the public headers of your framework using statements like #import <ThermalSDK/PublicHeader.h>
-
-#import <ThermalSDK/FLIRCamera.h>
-#import <ThermalSDK/FLIRCameraDeviceInfo.h>
-#import <ThermalSDK/FLIRDiscovery.h>
-#import <ThermalSDK/FLIRCameraImport.h>
-#import <ThermalSDK/FLIRThermalImage.h>
-#import <ThermalSDK/FLIRImageBase.h>
-#import <ThermalSDK/FLIRThermalImageFile.h>
-#import <ThermalSDK/FLIRScale.h>
-#import <ThermalSDK/FLIRFusion.h>
-#import <ThermalSDK/FLIRImageStatistics.h>
-#import <ThermalSDK/FLIRMeasurementSpot.h>
-#import <ThermalSDK/FLIRMeasurementShape.h>
-#import <ThermalSDK/FLIRMeasurementArea.h>
-#import <ThermalSDK/FLIRMeasurementMarker.h>
-#import <ThermalSDK/FLIRMeasurementParameters.h>
-#import <ThermalSDK/FLIRThermalValue.h>
-#import <ThermalSDK/FLIRThermalDelta.h>
-#import <ThermalSDK/FLIRMeasurementCollection.h>
-#import <ThermalSDK/FLIRMeasurementRectangle.h>
-#import <ThermalSDK/FLIRMeasurementEllipse.h>
-#import <ThermalSDK/FLIRMeasurementDimensions.h>
-#import <ThermalSDK/FLIRMeasurementLine.h>
-#import <ThermalSDK/FLIRMeasurementDelta.h>
-#import <ThermalSDK/FLIRPalette.h>
-#import <ThermalSDK/FLIRPaletteManager.h>
-#import <ThermalSDK/FLIRCameraEvent.h>
-#import <ThermalSDK/FLIRDiscoveredCamera.h>
-#import <ThermalSDK/FLIRIdentity.h>
-#import <ThermalSDK/FLIRRemoteControl.h>
-#import <ThermalSDK/FLIRMeasurementsController.h>
-#import <ThermalSDK/FLIRPaletteController.h>
-#import <ThermalSDK/FLIRSystem.h>
-#import <ThermalSDK/FLIRFocus.h>
-#import <ThermalSDK/FLIRTemperatureRange.h>
-#import <ThermalSDK/FLIRFusionController.h>
-#import <ThermalSDK/FLIRCalibration.h>
-#import <ThermalSDK/FLIRBattery.h>
-#import <ThermalSDK/FLIRScaleController.h>
-#import <ThermalSDK/FLIROverlayController.h>
-#import <ThermalSDK/FLIRDisplaySettings.h>
-#import <ThermalSDK/FLIRMeterLinkSensorPoll.h>
-#import <ThermalSDK/FLIRColorDistributionSettings.h>
-#import <ThermalSDK/FLIRStream.h>
-#import <ThermalSDK/FLIRStreamer.h>
-#import <ThermalSDK/FLIRRenderer.h>
-#import <ThermalSDK/FLIRColorizer.h>
-#import <ThermalSDK/FLIRImageColorizer.h>
-#import <ThermalSDK/FLIRRendererImpl.h>
-#import <ThermalSDK/FLIRWirelessCameraDetails.h>
-#import <ThermalSDK/FLIRQuantification.h>
-#import <ThermalSDK/FLIRCameraExport.h>
-

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Modules/module.modulemap

@@ -1,6 +0,0 @@
-framework module ThermalSDK {
-  umbrella header "ThermalSDK.h"
-  export *
-
-  module * { export * }
-}