ilabs-flir 2.0.3 → 2.0.4

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRCameraImport.h

@@ -1,204 +0,0 @@
-//
-//  FLIRCameraImport.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-//  Initialize and perform import (list and import images).
-
-#import <UIKit/UIKit.h>
-
-#import "FLIRIdentity.h"
-
-/** Describes different possible file locations in the cameras filesystem. */
-typedef NS_ENUM(NSInteger, FLIRLocation)
-{
-    /** Unknown root. */
-    FLIRLocationUnknown,
-    /** The active camera folder used for storing images. */
-    FLIRLocationActive,
-    /** Base folder for images (e.g. "DCIM" on the SD card). */
-    FLIRLocationImageBase
-};
-
-/// Options for listing images
-typedef NS_OPTIONS(NSInteger, FLIRListImagesFlags) {
-    /// recurse all found folders
-    FLIRListImagesRecursive = 1 << 0,
-    /// include hidden files
-    FLIRListImagesShowHidden = 1 << 1
-};
-
-/**
- *  Abstract file path on camera's filesystem.
- */
-@interface FLIRFileReference : NSObject
-/** Defines base part of the file path. */
-@property (nonatomic, readwrite) FLIRLocation location;
-/** Relative path to location.
- *
- * Example: Both "image.jpg" and "/image.jpg" would refer to an image file in the folder of `location`, and both "" and "/" would refer to the folder of `location`.
- * @note The path is expressed in a camera-compatible format using forward slashes (/) as the separator.
- */
-@property (nonatomic, nonnull, readwrite) NSString *path;
-@end
-
-/**
- *  Abstract directory path on camera's filesystem.
- */
-@interface FLIRFolderReference : NSObject
-/** Defines base part of the file path. */
-@property (nonatomic, readwrite) FLIRLocation location;
-/** Relative path to location.
- *
- * @note The path is expressed in a camera-compatible format using forward slashes (/) as the separator.
- */
-@property (nonatomic, nonnull, readwrite) NSString *path;
-
-@end
-
-@class FLIRThumbnail;
-
-/**
- *  Delegate to return events when files are found on a camera.
- */
-@protocol FLIRCameraImportEventDelegate <NSObject>
-
-/**
- *  This is called when a file is imported from the camera to the device.
- *  Note: you should NOT try to call `FLIRCamera.disconnect()` directly from this callback. Instead i.e. spawn a new thread.
- *
- *  @param filename The path to a new file.
- */
-- (void)fileAdded:(NSString * _Nonnull)filename;
-
-/**
- *  This is called when error occurs when downloading a file.
- *  Note: you should NOT try to call `FLIRCamera.disconnect()` directly from this callback. Instead i.e. spawn a new thread.
- *
- *  @param e Dictionary with error information (error message and filename)
- */
-- (void)importError:(NSDictionary<NSString *, NSString *> * _Nonnull)e;
-
-
-/**
- *  This is called to show the progress of downloading image files from the device.
- *  Note: you should NOT try to call `FLIRCamera.disconnect()` directly from this callback. Instead i.e. spawn a new thread.
- *
- *  @param progress The number of bytes downloaded so far.
- *  @param total The total number of bytes of the file downloading.
- *  @param file   The reference of the file currently being downloaded. Remember to compare files using `isEqual`.
- */
-- (void)fileProgress:(NSInteger)progress total:(NSInteger)total file:(FLIRFileReference * _Nonnull)file;
-
-@optional
-
-/**
- *  This is called when a thumbnail is downloaded
- *
- *  @param thumbnail A thumbnail with a reference to the original image and a thumbnail as a UIImage
- */
-- (void)gotThumbnail:(FLIRThumbnail * _Nonnull)thumbnail;
-
-/**
- * This is called when a file is deleted
- * @param file The reference of the file that was deleted
- */
-- (void)fileDeleted:(FLIRFileReference * _Nonnull)file;
-
-@end
-
-/**
- *  Objects returned by listImages
- */
-
-@interface  FLIRFileInfo : NSObject
-/** The name of the file, without the path (like Unix's basename)  */
-@property (nonatomic, nonnull) NSString *name;
-/** Abstract path to the file. */
-@property (nonatomic, nonnull) FLIRFileReference *reference;
-/** The time this file was last changed */
-@property (nonatomic, nonnull) NSDateComponents *time;
-/** The file size in bytes */
-@property (nonatomic) long long size;
-/** True if this file object represents a directory, false otherwise */
-@property (nonatomic) bool isDirectory;
-@end
-
-@interface FLIRThumbnail : NSObject
-/** File reference */
-@property (nonatomic, nonnull) FLIRFileReference *reference;
-/** Thumbnail */
-@property (nonatomic, nonnull) UIImage* thumbnail;
-@end
-
-/**
- *  This class facilitates importing images from Camera.
- */
-@interface FLIRCameraImport : NSObject
-
-/**
- *  Import files from camera.
- *
- *  @param imageList List of files to import. Use `listImages` or `listImagesInWorkFolder` to obtain an image list.
- *  @param destPath  Destination path.
- *
- *  @return TRUE if all is OK.
- */
-- (BOOL)startImport:(NSArray<FLIRFileReference *> * _Nonnull)imageList withDestPath:(NSString * _Nonnull)destPath;
-
-/**
- * Import thumbnails for files.
- *
- * @param imageList List of images. If a thumbnail is available, it will be imported, and the delegate will be called.
- */
-- (void)startImportThumbnails:(NSArray<FLIRFileReference *> * _Nonnull)imageList;
-
-/**
- *  Cancels the import session
- */
-- (void)cancelImport;
-
-/**
- *  A delegate to handle the events in FLIRCameraImportEventDelegate.
- */
-@property (nonatomic, weak, nullable) id<FLIRCameraImportEventDelegate> delegate;
-
-/**
- *  List all Flir files from default active folder in camera.
- *
- *  @return Array with FLIRFileInfos.
- */
--(NSArray<FLIRFileInfo *> * _Nullable)listImages:(out NSError *_Nullable *_Nullable)error;
-
-/**
- *  List all Flir files in camera.
- *
- *  @param folder the folder to list, nil will use the active default folder
- *  @param flags flags for recursive listing and including hidden folder
- *
- *  @return Array with FLIRFileInfos.
- */
-- (NSArray<FLIRFileInfo *> * _Nullable)listImages:(FLIRFileReference * _Nullable)folder
-                                            flags:(FLIRListImagesFlags)flags
-                                            error: (out NSError *_Nullable *_Nullable)error;
-
-/**
- *  List all Flir files from folder in camera.
- *
- *  @param folder workfolder with files.
- *
- *  @return Array with FLIRFileInfos.
- */
-
-- (NSArray<FLIRFileInfo *> * _Nullable)listImagesInWorkFolder:(FLIRFileReference * _Nonnull)folder error:(out NSError *_Nullable *_Nullable)error;
-
-/**
- * Gets workfolders as a list of folders from the specified camera.
- *
- * @return Returns workfolders as a list of folders from the camera. List may be empty.
- */
-- (NSArray<FLIRFileInfo *> * _Nullable)listWorkfolders:(out NSError *_Nullable *_Nullable)error;
-
-- (void)startDeleteFiles:(NSArray<FLIRFileReference *> * _Nonnull)fileList;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRColorDistributionSettings.h

@@ -1,204 +0,0 @@
-//
-//  FLIRColorDistributionSettings.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-09-03.
-//  Copyright © 2022 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-NS_ASSUME_NONNULL_BEGIN
-
-/**
- *  These methods transform each slot histogram bin x into the weight y.
- */
-typedef NS_ENUM(NSUInteger, FLIRHistogramModifier) {
-    /** y = x^(1/2).
-    * If all pixels in a slot were collected within a circle,
-    * the radius of this circle is proportional to the slot weight.
-    */
-    FLIRSquareRoot,
-
-    /**  y = x^(1/3) */
-    FLIRCubicRoot,
-
-    /**  ln(x) if x >= 2 else 0. Every doubling of a slot's pixel count
-    *  will increase the slot weight by a fixed amount.
-    */
-    FLIRLn,
-
-    /**  Scaled LN (y = y_LN / 2.3), which has no effect on the normalized weights. */
-    FLIRLog10,
-
-    /** y = min(x, plateauCount)
-    * Put the cap @p ulPlateauCount on each of this histogram's bins.
-    */
-    FLIRPlateau,
-
-    /** y = x */
-    FLIRNone
-};
-
-/**
- *  Specifies the color distributions used when running the colorizer on an image.
- */
-@interface FLIRColorDistributionSettings : NSObject
-
-@end
-
-/**
- *  The color information in the image is distributed linear to the temperature values of the image.
- *
- *  @note The palette colors used for each pixel is mapped in a linear fashion between the min and max temperatures of the image.
- *  Pixels above and below min and max will contain a color defined in the @ref atlas::image::Palette.
- */
-@interface FLIRTemperatureLinearSettings : FLIRColorDistributionSettings
-
-@end
-
-/**
- *  The colors are evenly distributed over the existing temperatures of the image and enhance the contrast.
- *
- *  This color distribution can be particularly successful when the image contains few peaks of very low or
- *  high temperature's values.
- */
-@interface FLIRHistogramEqualizationSettings : FLIRColorDistributionSettings
-
-/** Minimum heq slope limit. */
-@property (nonatomic, assign) float linearPercent;
-/** Maximum heq slope limit. */
-@property (nonatomic, assign) int plateauTruncation;
-/** How many pixels to ignore. */
-@property (nonatomic, assign) float tailPercent;
-/** Decrease to make the histogram more responsive to new scene content. */
-@property (nonatomic, assign) float histogramDf;
-/** Temporal filtering of span limits. */
-@property (nonatomic, assign) float scaleDf;
-/** Mode to transform each slot histogram bin x into the weight y. */
-@property (nonatomic, assign) FLIRHistogramModifier modifierMode;
-
-@end
-
-/**
- *  The color information in the image is distributed linear to the signal values of the image.
- *
- *  @note The palette colors used for each pixel is mapped in a linear fashion between the min and max signal values of the image. Pixels above and below min and max will contain a color defined in the @ref atlas::image::Palette.
-*/
-@interface FLIRSignalLinearSettings : FLIRColorDistributionSettings
-
-@end
-
-/**
- *  Specifies parameters for the plateau histogram equalization mode.
- *
- *  The colors are evenly distributed over the existing temperatures of the image and enhance the contrast.
- *  @note This color distribution can be particularly successful when the image contains few peaks
- *  of very low or high temperature's values.
- */
-@interface FLIRPlateauHistogramEqSettings : FLIRColorDistributionSettings
-
-/** Limits the maximum slope of the mapping function. */
-@property (nonatomic, assign) float maxGain;
-/** Limits the population of any single histogram bin. */
-@property (nonatomic, assign) float percentPerBin;
-/** Increasing values of Linear Percent more accurately preserves the visual representation of an object */
-@property (nonatomic, assign) float linearPercent;
-/** Determines the percentage of the histogram tails which are not ignored when generating the mapping function.*/
-@property (nonatomic, assign) float outlierPercent;
-/** Used to adjust the perceived brightness of the image. */
-@property (nonatomic, assign) float gamma;
-
-@end
-
-/**
- *  Specifies parameters for the Digital Detail Enhancement (DDE) and Entropy modes.
- *  Entropy modes reserve more shades of gray/colors for areas with more entropy by assigning areas with lower entropy lesser gray shades.
- *
- *  @note In this mode one color might not map to a specific temperature. Which means that the output
- *  scale is not radiometric accurate.
- */
-@interface FLIRDDESettings : FLIRPlateauHistogramEqSettings
-
-/** Detail to background ratio. */
-@property (nonatomic, assign) float detailToBackground;
-/** DDE smoothing factor */
-@property (nonatomic, assign) float smoothingFactor;
-/** Headroom for detail at dynamic range extremes */
-@property (nonatomic, assign) float detailHeadroom;
-
-@end
-
-
-/**
- *  Specifies parameters for Entropy modes.
- *  Entropy modes reserve more shades of gray/colors for areas with more entropy by assigning areas
- *  with lower entropy lesser gray shades.
- *
- *  @note In this mode one color might not map to a specific temperature. Which means that the output
- *  scale is not radiometric accurate.
- */
-@interface FLIREntropySettings : FLIRDDESettings
-
-@end
-
-/**
- *  Specifies parameters for the Adaptive Detail Enhancement (ADE) mode.
- *  Adaptive detail enhancement which is using a edge-preserving and noise-reducing smoothing filter
- *  to enhance the contrast in the image.
- *
- *  @note In this mode one color might not map to a specific temperature. Which means that the
- *  output scale is not radiometric accurate.
- */
-@interface FLIRADESettings : FLIRColorDistributionSettings
-
-/** Noise amplification limit (LF) (Low value=Disable this feature) */
-@property (nonatomic, assign) float alphaNoise;
-/** Edge preserving limit (LF); Too avoid halos around sharp edges (High value=Disable this feature). */
-@property (nonatomic, assign) float betaLf;
-/** Edge preserving limit (HF); Too avoid halos around sharp edges (High value=Disable this feature). */
-@property (nonatomic, assign) float betaHf;
-/** LF/HF crossover level; Low value=Only HF enhancement;High value=Only LF enhancement. */
-@property (nonatomic, assign) float betaMix;
-/** Amount of the high pass filter that should be used. */
-@property (nonatomic, assign) float hpBlendingAmount;
-/** Low part of the histogram that is discarded. */
-@property (nonatomic, assign) float lowLimit;
-/** High part of the histogram that is discarded. */
-@property (nonatomic, assign) float highLimit;
-/** Headroom for details at dynamic range extremes. */
-@property (nonatomic, assign) float headRoom;
-/** Footroom for details at dynamic range extremes. */
-@property (nonatomic, assign) float footRoom;
-/** Limits the maximum slope of the mapping function. */
-@property (nonatomic, assign) float gain;
-/** Linear portion used for mapping the colors. */
-@property (nonatomic, assign) float linearMix;
-
-@end
-
-/**
- *  Specifies parameters for the FSX mode.
- *  FSX is using a edge-preserving and noise-reducing smoothing filter
- *  to enhance the contrast in the image.
- */
-@interface FLIRFSXSettings : FLIRColorDistributionSettings
-
-/** Maximum allowed difference in the bilateral filtering. */
-@property (nonatomic, assign) float sigmaR;
-/** The weight factor applied to image details. */
-@property (nonatomic, assign) unsigned short alpha;
-
-@end
-
-/**
- *  Specifies parameters for the local contrast enhancement (LCE) mode.
- */
-@interface FLIRLCESettings : FLIRDDESettings
-
-/** Can be used to enhance the contrast. */
-@property (nonatomic, assign) int contrast;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRColorizer.h

@@ -1,82 +0,0 @@
-//
-//  FLIRColorizer.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-10-27.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-
-#pragma once
-
-#import <UIKit/UIKit.h>
-
-#import "FLIRRenderer.h"
-
-@class FLIRRange;
-
-/**
- *  Protocol for classes colorizing thermal images or streams
- */
-@protocol FLIRColorizer<FLIRRenderer>
-
-/**
- *  Automatic scale
- *
- *  If true rendered images will have scale automatically set based on the min and max values in the image.
- *  @note auto-adjusted scale is disabled by default
- *
- *  @note Calling this function does not trigger any render. Use `getImage()` if necessary to "re-render".
- *  @note it is recommended to keep the rendering setting consistent with the FLIRThermalImage information within FLIRScale.
- *  For this purpose code similar to the following could be used:
- *  // auto scale enabled
- *  let colorizer = ... // FLIRColorizer
- *  colorizer.autoScale = true
- *  // calling getImage(), among other internal work, will re-calculate scale range that we can then apply to Scale object
- *  colorizer.getImage()
- *  let scale = ... // obtain FLIRScale instance from FLIRThermalImage or in live stream from FLIRThermalStreamer.withThermalImage()
- *  // set the range calculated by the colorizer
- *  auto tempRange = colorizer.getScaleRange();
- *  scale.setRangeMin(tempRange.min);
- *  scale.setRangeMax(tempRange.max);
- *  //
- *  // auto scale disabled
- *  let colorizer = ... // FLIRColorizer
- *  colorizer.autoScale = false
- *  // first get scale
- *  let scale = ... // obtain FLIRScale instance from FLIRThermalImage or in live stream from FLIRThermalStreamer.withThermalImage()
- *  // then set manual range provided from the user
- *  scale.setRangeMin(userMinScaleValue);
- *  scale.setRangeMax(userMaxScaleValue);
- *  // finally update the colorizer so the rendered image is colorized using user-defined scale range
- *  colorizer.getImage()
- */
-@property (nonatomic, assign) BOOL autoScale;
-
-/**
- *  Render scale
- *
- *  If true the scale will be rendered when the image is rendered
- *  @note scale rendering is disabled by default
- */
-@property (nonatomic, assign) BOOL renderScale;
-
-/**
- *  Get an image with the scale
- *
- *  @note if scale rendering was disabled during last call to @ref update, the result from this function may be out of sync .
- *  @note For getting rendered image without scale, see @ref getImage
- *  @return Returns an UIImage, or nil if update hasn't been called with scale rendering enabled
- */
-- (UIImage * _Nullable)getScaleImage;
-
-/**
- *  Get the range of the scale
- *
- *  If auto scale is on, get the min and max temperature
- *  @return FLIRRange with min and max
- */
-
-- (FLIRRange * _Nullable)getScaleRange;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRDiscoveredCamera.h

@@ -1,44 +0,0 @@
-//
-//  FLIRDiscoveredCamera.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2022-02-03.
-//  Copyright © 2022 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-@class FLIRIdentity;
-@class FLIRWirelessCameraDetails;
-
-NS_ASSUME_NONNULL_BEGIN
-
-/// Describes how connect may be called
-typedef NS_OPTIONS(NSUInteger, FLIRConnectMethod) {
-    /// Allows normal usage of connect
-    CM_normal = 0x1,
-    /// Allows connect "connecting" over SSL
-    CM_secure = 0x2,
-};
-
-/// Plain information of discovered camera, including connection settings.
-@interface FLIRDiscoveredCamera : NSObject
-
-/// The Identity to use when connecting to a camera
-@property (nonatomic, nonnull, readonly, strong) FLIRIdentity *identity;
-
-/// Human readable name of the camera
-@property (nonatomic, nonnull, readonly) NSString *displayName;
-
-/// Describes how connect may be called
-@property (nonatomic, readonly) FLIRConnectMethod  supportedConnectMethods;
-
-/// Additional custom data received during discovery
-@property (nonatomic, nonnull, readonly) NSDictionary<NSString *, NSString *> *records;
-
-/// Optional wireless details for F1 wireless
-@property (nonatomic, nullable, readonly, strong) FLIRWirelessCameraDetails* wirelessCameraDetails;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRDiscovery.h

@@ -1,132 +0,0 @@
-//
-//  FLIRDiscovery.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-//  An interface for discovering cameras in vicinity.
-//
-
-#ifndef FLIRDiscovery_h
-#define FLIRDiscovery_h
-
-#import "FLIRIdentity.h"
-#import "FLIRDiscoveredCamera.h"
-
-/**
- *  Delegate to return events detected in the camera scanner
- */
-@protocol FLIRDiscoveryEventDelegate <NSObject>
-
-/**
- *  This event is raised when a camera device is returning an error.
- *
- *  @param error The error.
- *
- *  @param nsnetserviceserror The NSNetServicesError code
- *
- *  @param iface The interface where the discovery error was encountered.
- */
--(void)discoveryError:(nonnull NSString *)error netServiceError:(int)nsnetserviceserror on:(FLIRCommunicationInterface)iface;
-
-@optional
-
-/**
- *  This event is raised when new camera device is found.
- *  @Deprecated Implement `cameraDiscovered:` instead
- */
--(void)cameraFound:(nonnull FLIRIdentity *)cameraIdentity  __attribute((deprecated("Implement cameraDiscovered: instead.")));;
-
-/**
- *  This event is raised when a camera device is removed from the collection.
- */
--(void)cameraLost:(nonnull FLIRIdentity *)cameraIdentity;
-
-/**
- * This event is called when discovery is finished (i.e. OS limitation).
- * this event it NOT called after "FLIRDiscovery#stop()" is called
- *
- *  @param iface The interface where the discovery was finished .
- */
--(void) discoveryFinished:(FLIRCommunicationInterface)iface;
-
-/**
- * This event is called when a camera is discovered, it provides more information than `cameraFound:`
- */
-- (void)cameraDiscovered:(nonnull FLIRDiscoveredCamera *)discoveredCamera;
-
-@end
-
-
-/**
- Discover cameras on your connected network. Finds a FLIR ONE if connected to your device.
- 
- @note Cameras can be reported as found even if they aren't connectable, depending on the implementation (entries could be cached in system services).
-       Similarly camera lost events might be delayed, depending on the implementation (some implementations are only refreshed once per 5 minutes).
-       One should use `FLIRCamera.connect(...)` if faster feedback is required.
-
- ### Example Usage
- ```swift
- import UIKit
- import ThermalSDK
- 
- class ViewController: UIViewController, FLIRDiscoveryEventDelegate {
- 
-    // Create a discovery object.
-    let discoverer = FLIRDiscovery()
-
-    override func viewDidLoad() {
-        super.viewDidLoad()
-        // Set the discovere delegate to self.
-        discoverer.delegate = self
-        // Start discovery on all supported interfaces.
-        discoverer.start(FLIRCommunicationInterface.FLIRCommunicationInterfaceLightning)
-    }
- 
-    func cameraFound(_ cameraIdentity: FLIRIdentity) {
-        // Handle discovered camera identity object...
-    }
- 
-    // Etc ...
- }
- ```
- */
-@interface FLIRDiscovery : NSObject
-
-/**
- *  Start searching for devices on specified interfaces.
- *  The operation is asynchronous, scanning will continue in the background until FLIRDiscovery#stop() is called or OS cancels the operation
- *  @param iface specifying the interfaces to use eg "FLIRCommunicationInterface#FLIRCommunicationInterfaceLightning".
- */
--(void) start: (FLIRCommunicationInterface)iface;
-
-/**
- *  Start searching for devices on specified interfaces.
- *  The operation is asynchronous, scanning will continue in the background until FLIRDiscovery#stop() is called or OS cancels the operation
- *  @param iface specifying the interfaces to use eg "FLIRCommunicationInterface#FLIRCommunicationInterfaceLightning".
- *  @param type specify a specific type to scan for (currently only supported for the emulator)
- */
-- (void)start:(FLIRCommunicationInterface)iface cameraType:(FLIRCameraType)type;
-
-
-/**
- *  Stop scanning for devices.
- *  Does nothing if no scan is active.
- *  The operation is asynchronous
- */
--(void) stop;
-
-/**
- *  Checks if the scanner is active.
- *
- *  @return YES if still scanning for cameras, otherwise NO.
- */
--(BOOL) isDiscovering;
-
-/**
- *  A delegate to handle the events in FLIRDiscoveryEventDelegate.
- */
-@property (nonatomic, assign, nullable) id<FLIRDiscoveryEventDelegate> delegate;
-
-@end
-
-#endif

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRDisplaySettings.h

@@ -1,29 +0,0 @@
-//
-//  FLIRDisplaySettings.h
-//
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-/**
- *  The FLIRDisplaySettings exposes a range of visual attributes which specify how the image is
- *  displayed. They also specify how image was displayed when it was initially taken by a camera.
- *  FLIRDisplaySettings allows user to specify a "subsection" of interest, while still keeping the
- *  entire image available for context.
- *  For example: taking an image of a car engine, but "zoom-in" to a faulty spark-plug, while keeping
- *  the entire image of the photographed engine for a context.
- *  The FLIRDisplaySettings effects both the IR and visual image.
- */
-@interface FLIRDisplaySettings : NSObject
-
-- (instancetype)initWithZoomFactor:(float)zoomFactor zoomPanX:(int)zoomPanX zoomPanY:(int)zoomPanY;
-
-/** Defines the image zoom factor, where value 1.0 means no zoom. */
-@property (nonatomic, readonly) float zoomFactor;
-/** Defines the image zoom pan/offset in X axis, where value 0 means centered. */
-@property (nonatomic, readonly) int zoomPanX;
-/** Defines the image zoom pan/offset in Y axis, where value 0 means centered. */
-@property (nonatomic, readonly) int zoomPanY;
-
-@end