ilabs-flir 2.0.3 → 2.0.4

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRMeterLinkSensorPoll.h

@@ -1,247 +0,0 @@
-//
-//  FLIRMeterLinkSensorPoll.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-01-19.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import <Foundation/Foundation.h>
-
-/** Supported data quantities */
-// must match enum ES_QUANTITY
-typedef NS_ENUM(NSInteger, ExternalSensorQuantity) {
-    ESQ_INVALID = 0,
-
-    ESQ_CURRENT,
-    ESQ_VOLTAGE,
-    ESQ_RESISTANCE,
-    ESQ_REACTANCE,
-    ESQ_IMPEDANCE,
-    ESQ_CONDUCTANCE,
-    ESQ_CAPACITANCE,
-    ESQ_INDUCTANCE,
-    ESQ_EL_FIELD,
-    ESQ_MAG_FIELD,
-    ESQ_MAG_FLUX,
-    ESQ_CHARGE,
-    ESQ_TEMPERATURE,
-    ESQ___FREE_SLOT,
-    ESQ_TIME,
-    ESQ_FREQUENCY,
-    ESQ_MASS,
-    ESQ_FORCE,
-    ESQ_PRESSURE,
-    ESQ_MOMENTUM,
-    ESQ_TORQUE,
-    ESQ_SPEED,
-    ESQ_ACCELERATION,
-    ESQ_ENERGY,
-    ESQ_POWER,
-    ESQ_ENTHALPY,
-    ESQ_RELHUMIDITY,
-    ESQ_ABSHUMIDITY,
-    ESQ_RELMOISTURE,
-    ESQ_DISTANCE,
-    ESQ_ANGLE,
-    ESQ_RADIOACTIVITY,
-    ESQ_RAD_EXPOSURE,
-    ESQ_RAD_ABS_DOSE,
-    ESQ_RAD_EQ_DOSE,
-    ESQ_MASS_MASS_FRAC,
-    ESQ_MASS_VOL_FRAC,
-    ESQ_VOL_VOL_FRAC,
-    ESQ_RAD_FLUX,
-    ESQ_LUM_FLUX,
-    ESQ_LUM_INTENSITY,
-    ESQ_ILLUMINANCE,
-    ESQ_POWER_FACTOR,
-
-    ESQ_NONE,            // New with Meterlink 2.1. Previous, SI units. But with MeterLink 2.1, this are more basic units.
-    ESQ_NO_IMPL,         // Not mapped so far.
-    ESQ_ADMITTANCE,
-    ESQ_RPM,
-    ESQ_DUTYCYCLE,
-    ESQ_TEST_VOLT,
-    ESQ_POLAR_INDEX,
-    ESQ_DAR,
-    ESQ_EBOND_TEST_VOLT,
-    ESQ_EBOND_TEST,
-    ESQ_20MA,
-    ESQ_PHASE,
-    ESQ_HARMONIC_LEV,
-    ESQ_HARMONIC_THD,
-    ESQ_CREST,
-    ESQ_QUALITY_FACT,
-    ESQ_DISSIPATION,
-    ESQ_ESR,
-    ESQ_AC_TESTER_LOAD,
-    ESQ_AC_TESTER_UNLOAD_VOLT,
-    ESQ_AC_TESTER_LOAD_VOLT,
-    ESQ_AC_TESTER_DROP,
-    ESQ_RECEPTACLE_TEST,
-    ESQ_AFCI,
-    ESQ_GFCI,
-    ESQ_GFCI_TRIP_CURR,
-    ESQ_GFCI_TRIP_TIME,
-    ESQ_EDP_TRIP_CURR,
-    ESQ_NEUTRAL_GROUND,
-    ESQ_HOT_IMP,
-    ESQ_NEUTRAL_IMP,
-    ESQ_GROUND_IMP,
-    ESQ_SHORT_CIRC_CURRENT,
-    ESQ_EMISSIVITY,
-    ESQ_RESMOISTURE,
-    ESQ_GROUP,
-    ESQ_CAPMOISTURE,
-    ESQ_SOILMOISTURE,
-    ESQ_AREA,
-    ESQ_VOLUME,
-    ESQ_EMF_FREQ,
-    ESQ_EMF_STRENGTH,
-    ESQ_WEIGHT,
-    ESQ_IRRADIANCE,
-    ESQ_COMPBEARING,
-    ESQ_PITCH,
-    ESQ_LATITUDE,
-    ESQ_LONGITUDE,
-    ESQ_ALTITUDE,
-    
-    ESQ_LAST
-};
-
-/** Supported data aux info */
-// must match enum ES_AUX_INFO
-typedef NS_ENUM(NSInteger, ExternalSensorAuxInfo) {
-    ESAI_INVALID = 0,
-
-    ESAI_DC,        //!< Voltage/current is DC
-    ESAI_AC,        //!< Voltage/current is AC
-    ESAI_INT,       //!< Measurement is internal
-    ESAI_EXT,       //!< Measurement is external
-    ESAI_MIN__DEPR, //!< This was actually peak min, moved to ES_MEAS_INFO
-    ESAI_MAX__DEPR, //!< This was actually peak max, moved to ES_MEAS_INFO
-    ESAI_DEW,       //!< Temperature is dew point temp.
-    ESAI_AIR,       //!< Temperature is air temp.
-    ESAI_IR,        //!< Temperature is IR reflected temp.
-    ESAI_K,         //!< Temperature is thermocouple type K temp.
-    ESAI_COND,      //!< Temperature is condensation temp.
-    ESAI_DB,        //!< Temperature is dry bulb temp.
-    ESAI_WB,        //!< Temperature is wet bulb temp.
-    ESAI_WME,       //!< Mass fraction is wood moisture equivalent
-    ESAI_AC_DC,     //!< Voltage/current is AC+DC (CM83)
-    ESAI_VFD,       //!< LowPassFilter is applied before measument, intended for VariableFrequencyDrives (VFD)(CM83)
-    ESAI_THD,       //!< THD Total Harmonic Mode (CM83)
-    ESAI_PF,        //!< Power Factor (CM83)
-    
-    // New in MeterLink 2.1
-    ESAI_WGBT,      //!< Temperature is wet bulb global temp.
-    
-    ESAI_LAST
-};
-
-/** Measurement info */
-// must match enum ES_MEAS_INFO
-typedef NS_ENUM(NSInteger, ExternalSensorMeasInfo) {
-    ESMI_INVALID = 0,
-
-    ESMI_MIN,         //!< Minimum value
-    ESMI_MAX,         //!< Maximum value
-    ESMI_PEAKMIN,     //!< Peak min value
-    ESMI_PEAKMAX,     //!< Peak max value
-    ESMI_PEAKTOPEAK,  //!< Value is peak-to-peak
-    ESMI_MEAN,        //!< Mean value
-    ESMI_RMS,         //!< Root mean square value
-    ESMI_MEDIAN,      //!< Median value
-    ESMI_ALARM,       //!< Alarm from measuring device
-    ESMI_HOLD,        //!< Measuring device are in HOLD
-    ESMI_ERROR,       //!< Measuring device reports error.
-
-    ESMI_LAST
-};
-
-/** Type of Meterlink device */
-// must match enum class MeterType
-typedef NS_ENUM(NSInteger, ExternalSensorMeterType) {
-    ESMT_OTHER = 0,
-    ESMT_DMM,
-    ESMT_CLAMP,
-    ESMT_TEMPERATUREMETER,
-    ESMT_RHMETER,
-    ESMT_ANEMOMETER,
-    ESMT_MANOMETER,
-    ESMT_MOISTURE,
-    ESMT_GASSENSOR,
-    ESMT_WATERQUALITY,
-    ESMT_VIBRATIONMETER,
-    ESMT_SOUNDMETER,
-    ESMT_WEIGHTSCALE,
-    ESMT_SPEED,
-    ESMT_TACHOMETER,
-    ESMT_PRESSUREMETER,
-    ESMT_LAST,
-    ESMT_INVALID = 0XFF
-};
-
-/**
- *  Holds information of a MeterLink sensor poll and value contained in an image
- */
-@interface FLIRMeterLinkSensorPoll : NSObject
-
-/**  Meterlink protocol version. 0,1 = Meterlink 2.0. 2 = Meterlink 2.1, 3 = Meterlink 3.0 */
-@property (nonatomic, readonly) NSInteger protocolVersion;
-
-/**  Model name of Meterlink device, e.g. "CM83" */
-@property (nonatomic, readonly, nonnull) NSString *modelName;
-
-/**  Device serial number */
-@property (nonatomic, readonly, nonnull) NSString *serialNumber;
-
-/**  Device type */
-@property (nonatomic, readonly) ExternalSensorMeterType meterType;
-
-/**  Value quantity (invalid if unknown) */
-@property (nonatomic, readonly) ExternalSensorQuantity quantity;
-
-/** Value quantity as string */
-@property (nonatomic, readonly, nonnull) NSString *quantityString;
-
-/**  Auxillary information (invalid if unknown) */
-@property (nonatomic, readonly) ExternalSensorAuxInfo auxInfo;
-
-/**  Auxillary information as string */
-@property (nonatomic, readonly, nonnull) NSString *auxInfoString;
-
-/**  Measure information (invalid if unknown) */
-@property (nonatomic, readonly) ExternalSensorMeasInfo measInfo;
-
-/**  Measure information as string */
-@property (nonatomic, readonly, nonnull) NSString *measInfoString;
-
-/**  Time when the message was parsed */
-@property (nonatomic, readonly, nonnull) NSDate *timeStamp;
-
-/**  Value */
-@property (nonatomic, readonly) double value;
-
-/**  Value as string */
-@property (nonatomic, readonly, nonnull) NSString *valueString;
-
-/**  Number of significant numbers in value */
-@property (nonatomic, readonly) NSInteger precision;
-
-/**  Value is difference */
-@property (nonatomic, readonly) BOOL isDifference;
-
-/**  Value is valid  */
-@property (nonatomic, readonly) BOOL isValueValid;
-
-/**  -9=nano, -6=u, -3=milli, +3=kilo, etc. Only available for protocolVersion>=2 */
-@property (nonatomic, readonly) NSInteger unitPrefix;
-
-/**  Index of value for a multi sensor-reading packet. Only available for protocolVersion>=2 */
-@property (nonatomic, readonly) NSInteger index;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIROverlayController.h

@@ -1,27 +0,0 @@
-//
-//  FLIROverlayController.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-09-15.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-NS_ASSUME_NONNULL_BEGIN
-
-/**
- *  Controls the visual overlay with settings and scale on a camera
- */
-@interface FLIROverlayController : NSObject
-
-/** Check if camera has overlay */
-- (BOOL)getIsAvailable;
-/** Check if overlay is hidden */
-- (BOOL)getIsHidden;
-/** Set overlay hidden */
-- (BOOL)setIsHidden: (BOOL)hidden error:(out NSError * _Nullable *_Nullable)error;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRPalette.h

@@ -1,60 +0,0 @@
-//
-//  FLIRPalette.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import <UIKit/UIKit.h>
-
-/**
- *  Defines a palette representation, which can be applied to the ThermalImage in order to display it in specified colors.
- *  The palette is a set of colors applied to the temperature or signal data stored in the ThermalImage.
- *  Thanks to that each temperature / signal value can be displayed in specific color.
- *  This creates a visual representation of the ThermalImage.
- *  A Palette's object cannot be created directly.
- *  It can be obtained from ThermalImage by calling ThermalImage.getPalette() method.
- *  This method will always return an Palette instance.
- *  A ThermalImage has to have palette set in order to be presented to the User.
- *
- *  The Palette for ThermalImage can be changed. In order to get the other palettes a PaletteManager class should be used.
- *  It can provide the list of predefined palettes and allows to load more palettes as well from a user-defined location.
- */
-@interface FLIRPalette : NSObject
-
-/**
- *  Gets and sets the color of the above span.
- */
-@property (readwrite) UIColor * _Nonnull aboveSpanColor;
-
-/**
- *  Gets and sets the color of the below span.
- */
-@property (readwrite) UIColor * _Nonnull belowSpanColor;
-
-/**
- *  Gets and sets the color of the overflow.
- */
-@property (readwrite) UIColor * _Nonnull overflowColor;
-
-/**
- *  Gets and sets the color of the underflow.
- */
-@property (readwrite) UIColor * _Nonnull underflowColor;
-
-/**
- *  Gets or sets list of all the colors defining the palette.
- */
-@property (readwrite) NSArray<UIColor *> * _Nonnull paletteColors;
-
-/**
- *  Inverts the colors i.e. warm colors are shown as cold.
- */
-@property (readwrite) BOOL isInverted;
-
-/**
- *  Name of the Palette
- */
-@property (readwrite) NSString * _Nonnull name;
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRPaletteController.h

@@ -1,36 +0,0 @@
-//
-//  FLIRPaletteController.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-07-02.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import "FLIRCameraImport.h"
-
-/** camera palette */
-@interface FLIRRemotePalette : NSObject
-
-/** name of palette */
-@property (nonatomic, retain, nonnull) NSString* name;
-/** inverted state of palette */
-@property (nonatomic, assign) BOOL isInverted;
-/** Holds remote absolute path where palette file is stored on a particular camera, i.e.: "/FLIR/usr/etc/iron.pal". */
-@property (nonatomic, retain, nonnull) FLIRFileReference *fileReference;
-
-@end
-
-/**
- *  Controller for the camera palettes
- */
-@interface FLIRPaletteController : NSObject
-
-/** get current palette on camera */
-- (FLIRRemotePalette* _Nullable)getCurrentPalette;
-/** set current palette on camera */
-- (BOOL)setCurrentPalette: (FLIRRemotePalette* _Nonnull)currentPalette error: (out NSError * _Nullable *_Nullable)error;
-/** list available palettes on camera */
-- (NSArray<FLIRRemotePalette*>* _Nullable) getAvailablePalettes;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRPaletteManager.h

@@ -1,97 +0,0 @@
-//
-//  FLIRPaletteManager.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import "FLIRPalette.h"
-
-/**
- *  The palette manager is a way to get the default palettes. These palettes can be applied to a thermal image, to change its look.
- *  Every palette has a different color for a different temperature.
- *  Some Palettes provide better contrast, while other expose the important details.
- */
-@interface FLIRPaletteManager : NSObject
-
-/**
- *  Gets the Arctic Palette.
- */
-@property (readonly) FLIRPalette *arctic;
-
-/**
- *  Gets the blackhot Palette.
- */
-@property (readonly) FLIRPalette *blackhot;
-
-/**
- *  Gets the gray / "black and white" Palette
- */
-@property (readonly) FLIRPalette *gray;
-
-/**
- *  Gets the iron Palette.
- */
-@property (readonly) FLIRPalette *iron;
-
-/**
- *  Gets the lava Palette.
- */
-@property (readonly) FLIRPalette *lava;
-
-/**
- *  Gets the rainbow Palette.
- */
-@property (readonly) FLIRPalette *rainbow;
-
-/**
- *  Gets the rainbow HighContrast Palette.
- */
-@property (readonly) FLIRPalette *rainHC;
-
-/**
- *  Gets the coldest Palette.
- */
-@property (readonly) FLIRPalette *coldest;
-
-/**
- *  Gets the hottest Palette.
- */
-@property (readonly) FLIRPalette *hottest;
-
-/**
- *  Gets the colorWheel6 Palette.
- */
-@property (readonly) FLIRPalette *colorWheel6;
-
-/**
- *  Gets the doubleRainbow Palette.
- */
-@property (readonly) FLIRPalette *doubleRainbow;
-
-/**
- *  Gets the whitehot Palette.
- */
-@property (readonly) FLIRPalette *whitehot;
-
-/**
- *  Gets a list of default Palettes.
- *
- *  @return an array with the default palettes
- */
-- (NSArray<FLIRPalette*>*)getDefaultPalettes;
-
-/**
- *  Open a palette from file.
- *
- *  @return a palette object based on palette file
- */
-- (FLIRPalette *) openPalette:(NSURL *) paletteFile;
-
-/**
- * Get the default manager
- */
-+ (instancetype)default;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRQuantification.h

@@ -1,55 +0,0 @@
-//
-//  FLIRQuantification.h
-//  ThermalSDK
-//
-//  Created by Teledyne 2023-04-27.
-//  Copyright © 2023 Teledyne. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-///Describes the type of a gas leak
-typedef NS_ENUM(NSInteger, FLIRGasLeakType) {
-    /// Point-shaped leak
-    FLIRGasLeakType_point,
-    /// Diffused leak
-    FLIRGasLeakType_diffused
-};
-
-/// Describes the wind speed conditions
-typedef NS_ENUM(NSInteger, FLIRWindSpeed) {
-    /// Calm wind.
-    FLIRWindSpeed_calm,
-    /// Normal wind speed.
-    FLIRWindSpeed_normal,
-    /// High wind speed.
-    FLIRWindSpeed_high
-};
-
-/// Gas quantification information
-@interface FLIRGasQuantificationInput : NSObject
-/// Temperature of surrounding environment
-@property (nonatomic, readonly) double ambientTemperature;
-/// Name of the gas
-@property (nonatomic, readonly, nonnull) NSString* gas;
-/// Type of gas leak
-@property (nonatomic, readonly) FLIRGasLeakType leakType;
-/// Wind speed
-@property (nonatomic, readonly) FLIRWindSpeed windSpeed;
-/// Distance to object in meters
-@property (nonatomic, readonly) NSInteger distance;
-/// Detection threshold temperature difference
-@property (nonatomic, readonly) double thresholdDeltaTemperature;
-/// True if gas is warmer than the surrounding environment
-@property (nonatomic, readonly) BOOL emissive;
-
-@end
-
-/// Gas quantification result information
-@interface FLIRGasQuantificationResult : NSObject
-/// Amount of gas flow
-@property (nonatomic, readonly) double flow;
-/// Gas concentration
-@property (nonatomic, readonly) double concentration;
-
-@end