@vodailoc/kilo-kit-mcp 1.1.0 → 1.1.1

package/skills/design/frontend-design/references/animejs.md

@@ -1,396 +1,396 @@
-# Anime.js v4 Reference Guide for AI Assistants
-
-## 🚨 CRITICAL: ALWAYS USE ANIME.JS V4 SYNTAX 🚨
-
-**This project uses Anime.js v4.x.x - DO NOT use v3 syntax under any circumstances**
-
-**If you're about to write `import anime from 'animejs'` - STOP!**
-**That's v3. This project uses v4. Use the correct import below.**
-
-## 🚀 Quick Start - Essential Setup
-
-### 1. Correct v4 Import (REQUIRED)
-```javascript
-// ✅ CORRECT v4 imports
-import { animate, createTimeline, stagger, utils, svg, eases, engine } from 'animejs';
-
-// ❌ WRONG v3 import - NEVER USE THIS
-// import anime from 'animejs';
-```
-
-### 2. Configure Time Units to Seconds (SET ONCE IN APP ENTRY POINT)
-```javascript
-// ⚠️ IMPORTANT: Set this ONLY ONCE in your app's main entry point
-// For React: App.js/App.tsx or index.js/index.tsx
-// For Vue: main.js/main.ts
-// For vanilla JS: The main script file that loads first
-
-import { engine } from 'animejs';
-
-// Set ONLY in the app's entry point, NOT in components
-engine.timeUnit = 's';
-
-// Now ALL durations use seconds everywhere: 1 = 1 second, 0.5 = 500ms
-// DO NOT set this in individual components - it's a global setting!
-```
-
-### 3. Single-Line Format for Simple Animations (REQUIRED)
-```javascript
-// ✅ GOOD - Clean, readable, one line for simple tweens
-animate('.element', { x: 250, duration: 1, ease: 'outQuad' });
-
-// ❌ BAD - Unnecessary multi-line for simple tweens
-animate('.element', {
-  x: 250,
-  duration: 1,
-  ease: 'outQuad'
-});
-```
-
-## ✅ Quick Validation Checklist
-
-Before generating anime.js code, verify:
-- [ ] Using `import { animate, ... } from 'animejs'` NOT `import anime`
-- [ ] Set `engine.timeUnit = 's'` ONLY ONCE in app entry point (NOT in components)
-- [ ] Using seconds for all durations (1 = 1 second)
-- [ ] Simple animations on ONE LINE
-- [ ] Using `animate()` NOT `anime()`
-- [ ] Using `createTimeline()` NOT `anime.timeline()`
-- [ ] Using `ease:` NOT `easing:`
-- [ ] Using `to:` for values, NOT `value:`
-- [ ] Using `on` prefix for callbacks (onUpdate, onComplete)
-- [ ] Using `loop` and `alternate` NOT `direction`
-- [ ] Using correct v4 stagger syntax with `stagger()`
-- [ ] Using shorthand properties (x, y, z) when possible
-
-## 🎯 Core API - Most Common Patterns
-
-### Basic Animation (single line for simple tweens)
-```javascript
-// Simple tween - ALWAYS one line
-animate('.element', { x: 250, rotate: 180, duration: 0.8, ease: 'inOutQuad' });
-
-// Fade in - one line
-animate('.element', { opacity: [0, 1], y: [20, 0], duration: 0.6, ease: 'outQuad' });
-
-// Scale bounce - one line
-animate('.element', { scale: [0, 1], duration: 0.8, ease: 'outElastic(1, 0.5)' });
-
-// Infinite loop - one line
-animate('.element', { rotate: 360, duration: 2, loop: true, ease: 'linear' });
-```
-
-### Timeline Creation
-```javascript
-const tl = createTimeline({ defaults: { duration: 1, ease: 'outQuad' } });
-
-tl.add('.element1', { x: 250 })
-  .add('.element2', { y: 100 }, '+=0.2')  // 0.2s after previous
-  .add('.element3', { rotate: 180 }, '<'); // at start of previous
-```
-
-### Stagger Animations (single line)
-```javascript
-animate('.elements', { x: 250, delay: stagger(0.1) });  // 0.1s between each
-animate('.elements', { x: 250, delay: stagger(0.1, { from: 'center' }) });
-```
-
-## ❌ Common AI Mistakes to Avoid
-
-### MISTAKE #1: Using v3 Import Pattern
-```javascript
-// ❌ WRONG - This is v3
-import anime from 'animejs';
-anime({ targets: '.element', translateX: 250 });
-
-// ✅ CORRECT - Always use v4
-import { animate } from 'animejs';
-animate('.element', { x: 250 });
-```
-
-### MISTAKE #2: Using 'targets' Property
-```javascript
-// ❌ WRONG - 'targets' is v3
-animate({ targets: '.element', translateX: 250 });
-
-// ✅ CORRECT - First parameter is the target
-animate('.element', { x: 250 });
-```
-
-### MISTAKE #3: Using 'easing' Instead of 'ease'
-```javascript
-// ❌ WRONG
-animate('.element', { x: 250, easing: 'easeInOutQuad' });
-
-// ✅ CORRECT
-animate('.element', { x: 250, ease: 'inOutQuad' });
-```
-
-### MISTAKE #4: Using 'value' for Animation Values
-```javascript
-// ❌ WRONG - 'value' is v3
-animate('.element', { x: { value: 250 } });
-
-// ✅ CORRECT - Use 'to' for values
-animate('.element', { x: { to: 250 } });
-```
-
-### MISTAKE #5: Wrong Timeline Syntax
-```javascript
-// ❌ WRONG - anime.timeline() is v3
-const tl = anime.timeline();
-
-// ✅ CORRECT - Use createTimeline
-import { createTimeline } from 'animejs';
-const tl = createTimeline();
-```
-
-## 📋 Property Syntax Reference (v3 → v4)
-
-### Animation Values
-```javascript
-// ✅ v4: Use 'to' for target values
-{ opacity: { to: 0.5 } }
-{ x: { to: [0, 100] } }
-
-// ❌ v3: DON'T use 'value'
-// { opacity: { value: 0.5 } }
-```
-
-### Easing Functions
-```javascript
-// ✅ v4: Use 'ease' (no 'ease' prefix)
-{ ease: 'inOutQuad' }
-{ ease: 'outElastic(1, 0.5)' }
-{ ease: 'cubicBezier(0.4, 0, 0.2, 1)' }
-
-// ❌ v3: DON'T use 'easing' or 'ease' prefix
-// { easing: 'easeInOutQuad' }
-```
-
-### Direction & Looping
-```javascript
-// ✅ v4
-{
-  loop: true,        // infinite loop
-  loop: 3,          // loop 3 times
-  alternate: true,   // alternate direction
-  reversed: true     // play in reverse
-}
-
-// ❌ v3: DON'T use 'direction'
-// { direction: 'alternate' }
-```
-
-### Transform Properties (Shorthand Preferred)
-```javascript
-// ✅ Both syntaxes work in v4:
-animate('.element', { x: 100, y: 50, z: 25 });           // shorthand (preferred)
-animate('.element', { translateX: 100, translateY: 50, translateZ: 25 }); // explicit
-```
-
-### Callbacks (ALL prefixed with 'on')
-```javascript
-// ✅ v4: Simple callback - keep on one line
-animate('.element', { x: 250, duration: 1, onComplete: () => console.log('Done!') });
-
-// ✅ v4: Multiple callbacks - use multi-line
-animate('.element', {
-  x: 250,
-  duration: 1,
-  onBegin: (anim) => console.log('Started'),
-  onUpdate: (anim) => console.log('Progress:', anim.progress),
-  onComplete: (anim) => console.log('Finished')
-});
-
-// ❌ v3: DON'T use unprefixed callbacks
-// { update: () => {}, complete: () => {} }
-```
-
-## 📝 Code Formatting Guidelines
-
-### ALWAYS Use Single-Line Format for Simple Animations
-**This is mandatory for readability** - Use for animations with ≤4 properties:
-```javascript
-// ✅ GOOD - Clean, readable, one line
-animate('.element', { x: 250, duration: 1, ease: 'outQuad' });
-animate('.box', { opacity: 0.5, scale: 0.8, duration: 0.3 });
-
-// ❌ BAD - Unnecessary multi-line for simple tweens
-animate('.element', {
-  x: 250,
-  duration: 1,
-  ease: 'outQuad'
-});
-```
-
-### Multi-Line Format (Only for Complex Animations)
-Use for animations with >4 properties or callbacks:
-```javascript
-// Complex animation with callbacks - multi-line is appropriate
-animate('.element', {
-  x: { to: [0, 100, 50], duration: 2 },
-  y: { to: [0, -50, 0], duration: 2 },
-  scale: [0, 1.2, 1],
-  ease: 'outElastic(1, 0.5)',
-  onComplete: () => console.log('Done!')
-});
-```
-
-## 🎨 Common Animation Patterns
-
-### Hover Animation (single line per animation)
-```javascript
-element.addEventListener('mouseenter', () => animate(element, { scale: 1.1, duration: 0.3, ease: 'outQuad' }));
-element.addEventListener('mouseleave', () => animate(element, { scale: 1, duration: 0.3, ease: 'outQuad' }));
-```
-
-### Sequential Timeline
-```javascript
-const tl = createTimeline({ defaults: { duration: 0.5 } });
-tl.add('.step1', { x: 100 })
-  .add('.step2', { y: 100 })
-  .add('.step3', { scale: 2 });
-```
-
-### Scroll-triggered Animation
-```javascript
-import { createScrollObserver } from 'animejs';
-
-createScrollObserver({
-  target: '.scroll-element',
-  root: document.querySelector('.scroll-container'),
-  play: () => animate('.element', { x: 250, duration: 1 }),
-  visibility: 0.5
-});
-```
-
-## 🔧 Advanced Features
-
-### SVG Animations
-```javascript
-import { animate, svg } from 'animejs';
-
-// Morph path (single line)
-animate('#path1', { d: svg.morphTo('#path2'), duration: 1 });
-
-// Draw SVG line
-const drawable = svg.createDrawable('.svg-path');
-animate(drawable, { draw: '0% 100%', duration: 2 });
-
-// Motion path (single line for simple usage)
-const motionPath = svg.createMotionPath('#motion-path');
-animate('.element', { x: motionPath.translateX, y: motionPath.translateY, rotate: motionPath.rotate });
-```
-
-### Utility Functions
-```javascript
-import { utils } from 'animejs';
-
-// DOM selection
-const elements = utils.$('.elements');
-
-// Get current value
-const currentX = utils.get('.element', 'translateX');
-
-// Set values immediately
-utils.set('.element', { x: 100, opacity: 0.5 });
-
-// Remove animations
-utils.remove('.element');
-
-// Math utilities
-utils.random(0, 100);
-utils.shuffle([1, 2, 3, 4]);
-utils.lerp(0, 100, 0.5); // 50
-utils.clamp(150, 0, 100); // 100
-```
-
-### TypeScript Support
-```typescript
-import { animate, createTimeline, JSAnimation, Timeline, AnimationParams, TimelineParams } from 'animejs';
-
-// Single line for simple animations
-const animation: JSAnimation = animate('.element', { x: 250, duration: 1 } as AnimationParams);
-
-const timeline: Timeline = createTimeline({ defaults: { duration: 0.8 } } as TimelineParams);
-```
-
-## ⚡ Performance Tips
-
-1. **Use transforms over position properties**
-   ```javascript
-   // ✅ Good - uses transform
-   animate('.element', { x: 100 });
-   
-   // ❌ Avoid - triggers layout
-   animate('.element', { left: 100 });
-   ```
-
-2. **Batch animations in timelines**
-   ```javascript
-   // ✅ Good - single timeline
-   const tl = createTimeline();
-   elements.forEach(el => tl.add(el, { x: 100 }));
-   
-   // ❌ Avoid - multiple animations
-   elements.forEach(el => animate(el, { x: 100 }));
-   ```
-
-3. **Use will-change CSS property for complex animations**
-   ```css
-   .animated-element {
-     will-change: transform, opacity;
-   }
-   ```
-
-## 🚫 How to Identify V3 Code (DON'T USE)
-
-If you see ANY of these patterns, it's v3 and MUST be updated:
-
-```javascript
-// All of these are V3 - NEVER USE:
-anime({ ... })
-anime.timeline()
-anime.stagger()
-anime.random()
-anime.remove()
-anime.get()
-anime.set()
-anime.running
-{ targets: '...' }
-{ easing: '...' }
-{ value: ... }
-{ direction: 'alternate' }
-```
-
-## 💡 AI Code Generation Rules
-
-When asked to create animations with anime.js:
-
-1. **ONLY** set `engine.timeUnit = 's'` ONCE in the app's main entry point (App.js, main.js, index.js) - NEVER in components
-2. **ALWAYS** use seconds for all durations (1 = 1 second)
-3. **ALWAYS** format simple animations on ONE LINE
-4. **ALWAYS** start with v4 imports
-5. **NEVER** use `anime()` function
-6. **ALWAYS** use `animate()` for animations
-7. **NEVER** include `targets` property
-8. **ALWAYS** use `ease` not `easing`
-9. **NEVER** use `value`, use `to` instead
-10. **ALWAYS** prefix callbacks with `on`
-11. **NEVER** use `direction`, use `alternate` and `reversed`
-12. **ALWAYS** use `createTimeline()` for timelines
-13. **PREFER** shorthand (`x`) over explicit (`translateX`)
-14. **FORMAT** short animations on single line (≤4 properties)
-15. **NEVER** generate v3 syntax under any circumstances
-
-## NPM Installation
-```bash
-npm install animejs
-```
-
-## Version Check
-```javascript
-// Current version: 4.x.x
-// If you see any code using anime({ targets: ... }), it's v3 and needs updating!
+# Anime.js v4 Reference Guide for AI Assistants
+
+## 🚨 CRITICAL: ALWAYS USE ANIME.JS V4 SYNTAX 🚨
+
+**This project uses Anime.js v4.x.x - DO NOT use v3 syntax under any circumstances**
+
+**If you're about to write `import anime from 'animejs'` - STOP!**
+**That's v3. This project uses v4. Use the correct import below.**
+
+## 🚀 Quick Start - Essential Setup
+
+### 1. Correct v4 Import (REQUIRED)
+```javascript
+// ✅ CORRECT v4 imports
+import { animate, createTimeline, stagger, utils, svg, eases, engine } from 'animejs';
+
+// ❌ WRONG v3 import - NEVER USE THIS
+// import anime from 'animejs';
+```
+
+### 2. Configure Time Units to Seconds (SET ONCE IN APP ENTRY POINT)
+```javascript
+// ⚠️ IMPORTANT: Set this ONLY ONCE in your app's main entry point
+// For React: App.js/App.tsx or index.js/index.tsx
+// For Vue: main.js/main.ts
+// For vanilla JS: The main script file that loads first
+
+import { engine } from 'animejs';
+
+// Set ONLY in the app's entry point, NOT in components
+engine.timeUnit = 's';
+
+// Now ALL durations use seconds everywhere: 1 = 1 second, 0.5 = 500ms
+// DO NOT set this in individual components - it's a global setting!
+```
+
+### 3. Single-Line Format for Simple Animations (REQUIRED)
+```javascript
+// ✅ GOOD - Clean, readable, one line for simple tweens
+animate('.element', { x: 250, duration: 1, ease: 'outQuad' });
+
+// ❌ BAD - Unnecessary multi-line for simple tweens
+animate('.element', {
+  x: 250,
+  duration: 1,
+  ease: 'outQuad'
+});
+```
+
+## ✅ Quick Validation Checklist
+
+Before generating anime.js code, verify:
+- [ ] Using `import { animate, ... } from 'animejs'` NOT `import anime`
+- [ ] Set `engine.timeUnit = 's'` ONLY ONCE in app entry point (NOT in components)
+- [ ] Using seconds for all durations (1 = 1 second)
+- [ ] Simple animations on ONE LINE
+- [ ] Using `animate()` NOT `anime()`
+- [ ] Using `createTimeline()` NOT `anime.timeline()`
+- [ ] Using `ease:` NOT `easing:`
+- [ ] Using `to:` for values, NOT `value:`
+- [ ] Using `on` prefix for callbacks (onUpdate, onComplete)
+- [ ] Using `loop` and `alternate` NOT `direction`
+- [ ] Using correct v4 stagger syntax with `stagger()`
+- [ ] Using shorthand properties (x, y, z) when possible
+
+## 🎯 Core API - Most Common Patterns
+
+### Basic Animation (single line for simple tweens)
+```javascript
+// Simple tween - ALWAYS one line
+animate('.element', { x: 250, rotate: 180, duration: 0.8, ease: 'inOutQuad' });
+
+// Fade in - one line
+animate('.element', { opacity: [0, 1], y: [20, 0], duration: 0.6, ease: 'outQuad' });
+
+// Scale bounce - one line
+animate('.element', { scale: [0, 1], duration: 0.8, ease: 'outElastic(1, 0.5)' });
+
+// Infinite loop - one line
+animate('.element', { rotate: 360, duration: 2, loop: true, ease: 'linear' });
+```
+
+### Timeline Creation
+```javascript
+const tl = createTimeline({ defaults: { duration: 1, ease: 'outQuad' } });
+
+tl.add('.element1', { x: 250 })
+  .add('.element2', { y: 100 }, '+=0.2')  // 0.2s after previous
+  .add('.element3', { rotate: 180 }, '<'); // at start of previous
+```
+
+### Stagger Animations (single line)
+```javascript
+animate('.elements', { x: 250, delay: stagger(0.1) });  // 0.1s between each
+animate('.elements', { x: 250, delay: stagger(0.1, { from: 'center' }) });
+```
+
+## ❌ Common AI Mistakes to Avoid
+
+### MISTAKE #1: Using v3 Import Pattern
+```javascript
+// ❌ WRONG - This is v3
+import anime from 'animejs';
+anime({ targets: '.element', translateX: 250 });
+
+// ✅ CORRECT - Always use v4
+import { animate } from 'animejs';
+animate('.element', { x: 250 });
+```
+
+### MISTAKE #2: Using 'targets' Property
+```javascript
+// ❌ WRONG - 'targets' is v3
+animate({ targets: '.element', translateX: 250 });
+
+// ✅ CORRECT - First parameter is the target
+animate('.element', { x: 250 });
+```
+
+### MISTAKE #3: Using 'easing' Instead of 'ease'
+```javascript
+// ❌ WRONG
+animate('.element', { x: 250, easing: 'easeInOutQuad' });
+
+// ✅ CORRECT
+animate('.element', { x: 250, ease: 'inOutQuad' });
+```
+
+### MISTAKE #4: Using 'value' for Animation Values
+```javascript
+// ❌ WRONG - 'value' is v3
+animate('.element', { x: { value: 250 } });
+
+// ✅ CORRECT - Use 'to' for values
+animate('.element', { x: { to: 250 } });
+```
+
+### MISTAKE #5: Wrong Timeline Syntax
+```javascript
+// ❌ WRONG - anime.timeline() is v3
+const tl = anime.timeline();
+
+// ✅ CORRECT - Use createTimeline
+import { createTimeline } from 'animejs';
+const tl = createTimeline();
+```
+
+## 📋 Property Syntax Reference (v3 → v4)
+
+### Animation Values
+```javascript
+// ✅ v4: Use 'to' for target values
+{ opacity: { to: 0.5 } }
+{ x: { to: [0, 100] } }
+
+// ❌ v3: DON'T use 'value'
+// { opacity: { value: 0.5 } }
+```
+
+### Easing Functions
+```javascript
+// ✅ v4: Use 'ease' (no 'ease' prefix)
+{ ease: 'inOutQuad' }
+{ ease: 'outElastic(1, 0.5)' }
+{ ease: 'cubicBezier(0.4, 0, 0.2, 1)' }
+
+// ❌ v3: DON'T use 'easing' or 'ease' prefix
+// { easing: 'easeInOutQuad' }
+```
+
+### Direction & Looping
+```javascript
+// ✅ v4
+{
+  loop: true,        // infinite loop
+  loop: 3,          // loop 3 times
+  alternate: true,   // alternate direction
+  reversed: true     // play in reverse
+}
+
+// ❌ v3: DON'T use 'direction'
+// { direction: 'alternate' }
+```
+
+### Transform Properties (Shorthand Preferred)
+```javascript
+// ✅ Both syntaxes work in v4:
+animate('.element', { x: 100, y: 50, z: 25 });           // shorthand (preferred)
+animate('.element', { translateX: 100, translateY: 50, translateZ: 25 }); // explicit
+```
+
+### Callbacks (ALL prefixed with 'on')
+```javascript
+// ✅ v4: Simple callback - keep on one line
+animate('.element', { x: 250, duration: 1, onComplete: () => console.log('Done!') });
+
+// ✅ v4: Multiple callbacks - use multi-line
+animate('.element', {
+  x: 250,
+  duration: 1,
+  onBegin: (anim) => console.log('Started'),
+  onUpdate: (anim) => console.log('Progress:', anim.progress),
+  onComplete: (anim) => console.log('Finished')
+});
+
+// ❌ v3: DON'T use unprefixed callbacks
+// { update: () => {}, complete: () => {} }
+```
+
+## 📝 Code Formatting Guidelines
+
+### ALWAYS Use Single-Line Format for Simple Animations
+**This is mandatory for readability** - Use for animations with ≤4 properties:
+```javascript
+// ✅ GOOD - Clean, readable, one line
+animate('.element', { x: 250, duration: 1, ease: 'outQuad' });
+animate('.box', { opacity: 0.5, scale: 0.8, duration: 0.3 });
+
+// ❌ BAD - Unnecessary multi-line for simple tweens
+animate('.element', {
+  x: 250,
+  duration: 1,
+  ease: 'outQuad'
+});
+```
+
+### Multi-Line Format (Only for Complex Animations)
+Use for animations with >4 properties or callbacks:
+```javascript
+// Complex animation with callbacks - multi-line is appropriate
+animate('.element', {
+  x: { to: [0, 100, 50], duration: 2 },
+  y: { to: [0, -50, 0], duration: 2 },
+  scale: [0, 1.2, 1],
+  ease: 'outElastic(1, 0.5)',
+  onComplete: () => console.log('Done!')
+});
+```
+
+## 🎨 Common Animation Patterns
+
+### Hover Animation (single line per animation)
+```javascript
+element.addEventListener('mouseenter', () => animate(element, { scale: 1.1, duration: 0.3, ease: 'outQuad' }));
+element.addEventListener('mouseleave', () => animate(element, { scale: 1, duration: 0.3, ease: 'outQuad' }));
+```
+
+### Sequential Timeline
+```javascript
+const tl = createTimeline({ defaults: { duration: 0.5 } });
+tl.add('.step1', { x: 100 })
+  .add('.step2', { y: 100 })
+  .add('.step3', { scale: 2 });
+```
+
+### Scroll-triggered Animation
+```javascript
+import { createScrollObserver } from 'animejs';
+
+createScrollObserver({
+  target: '.scroll-element',
+  root: document.querySelector('.scroll-container'),
+  play: () => animate('.element', { x: 250, duration: 1 }),
+  visibility: 0.5
+});
+```
+
+## 🔧 Advanced Features
+
+### SVG Animations
+```javascript
+import { animate, svg } from 'animejs';
+
+// Morph path (single line)
+animate('#path1', { d: svg.morphTo('#path2'), duration: 1 });
+
+// Draw SVG line
+const drawable = svg.createDrawable('.svg-path');
+animate(drawable, { draw: '0% 100%', duration: 2 });
+
+// Motion path (single line for simple usage)
+const motionPath = svg.createMotionPath('#motion-path');
+animate('.element', { x: motionPath.translateX, y: motionPath.translateY, rotate: motionPath.rotate });
+```
+
+### Utility Functions
+```javascript
+import { utils } from 'animejs';
+
+// DOM selection
+const elements = utils.$('.elements');
+
+// Get current value
+const currentX = utils.get('.element', 'translateX');
+
+// Set values immediately
+utils.set('.element', { x: 100, opacity: 0.5 });
+
+// Remove animations
+utils.remove('.element');
+
+// Math utilities
+utils.random(0, 100);
+utils.shuffle([1, 2, 3, 4]);
+utils.lerp(0, 100, 0.5); // 50
+utils.clamp(150, 0, 100); // 100
+```
+
+### TypeScript Support
+```typescript
+import { animate, createTimeline, JSAnimation, Timeline, AnimationParams, TimelineParams } from 'animejs';
+
+// Single line for simple animations
+const animation: JSAnimation = animate('.element', { x: 250, duration: 1 } as AnimationParams);
+
+const timeline: Timeline = createTimeline({ defaults: { duration: 0.8 } } as TimelineParams);
+```
+
+## ⚡ Performance Tips
+
+1. **Use transforms over position properties**
+   ```javascript
+   // ✅ Good - uses transform
+   animate('.element', { x: 100 });
+   
+   // ❌ Avoid - triggers layout
+   animate('.element', { left: 100 });
+   ```
+
+2. **Batch animations in timelines**
+   ```javascript
+   // ✅ Good - single timeline
+   const tl = createTimeline();
+   elements.forEach(el => tl.add(el, { x: 100 }));
+   
+   // ❌ Avoid - multiple animations
+   elements.forEach(el => animate(el, { x: 100 }));
+   ```
+
+3. **Use will-change CSS property for complex animations**
+   ```css
+   .animated-element {
+     will-change: transform, opacity;
+   }
+   ```
+
+## 🚫 How to Identify V3 Code (DON'T USE)
+
+If you see ANY of these patterns, it's v3 and MUST be updated:
+
+```javascript
+// All of these are V3 - NEVER USE:
+anime({ ... })
+anime.timeline()
+anime.stagger()
+anime.random()
+anime.remove()
+anime.get()
+anime.set()
+anime.running
+{ targets: '...' }
+{ easing: '...' }
+{ value: ... }
+{ direction: 'alternate' }
+```
+
+## 💡 AI Code Generation Rules
+
+When asked to create animations with anime.js:
+
+1. **ONLY** set `engine.timeUnit = 's'` ONCE in the app's main entry point (App.js, main.js, index.js) - NEVER in components
+2. **ALWAYS** use seconds for all durations (1 = 1 second)
+3. **ALWAYS** format simple animations on ONE LINE
+4. **ALWAYS** start with v4 imports
+5. **NEVER** use `anime()` function
+6. **ALWAYS** use `animate()` for animations
+7. **NEVER** include `targets` property
+8. **ALWAYS** use `ease` not `easing`
+9. **NEVER** use `value`, use `to` instead
+10. **ALWAYS** prefix callbacks with `on`
+11. **NEVER** use `direction`, use `alternate` and `reversed`
+12. **ALWAYS** use `createTimeline()` for timelines
+13. **PREFER** shorthand (`x`) over explicit (`translateX`)
+14. **FORMAT** short animations on single line (≤4 properties)
+15. **NEVER** generate v3 syntax under any circumstances
+
+## NPM Installation
+```bash
+npm install animejs
+```
+
+## Version Check
+```javascript
+// Current version: 4.x.x
+// If you see any code using anime({ targets: ... }), it's v3 and needs updating!
 ```