@synsci/cli-darwin-x64 1.1.97 → 1.1.99

package/bin/skills/ml-paper-writing/templates/icml2026/example_paper.tex

@@ -1,662 +0,0 @@
-%%%%%%%% ICML 2026 EXAMPLE LATEX SUBMISSION FILE %%%%%%%%%%%%%%%%%
-
-\documentclass{article}
-
-% Recommended, but optional, packages for figures and better typesetting:
-\usepackage{microtype}
-\usepackage{graphicx}
-\usepackage{subcaption}
-\usepackage{booktabs} % for professional tables
-
-% hyperref makes hyperlinks in the resulting PDF.
-% If your build breaks (sometimes temporarily if a hyperlink spans a page)
-% please comment out the following usepackage line and replace
-% \usepackage{icml2026} with \usepackage[nohyperref]{icml2026} above.
-\usepackage{hyperref}
-
-
-% Attempt to make hyperref and algorithmic work together better:
-\newcommand{\theHalgorithm}{\arabic{algorithm}}
-
-% Use the following line for the initial blind version submitted for review:
-\usepackage{icml2026}
-
-% For preprint, use
-% \usepackage[preprint]{icml2026}
-
-% If accepted, instead use the following line for the camera-ready submission:
-% \usepackage[accepted]{icml2026}
-
-\usepackage{amsmath}
-\usepackage{amssymb}
-\usepackage{mathtools}
-\usepackage{amsthm}
-
-
-% if you use cleveref..
-\usepackage[capitalize,noabbrev]{cleveref}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% THEOREMS
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\theoremstyle{plain}
-\newtheorem{theorem}{Theorem}[section]
-\newtheorem{proposition}[theorem]{Proposition}
-\newtheorem{lemma}[theorem]{Lemma}
-\newtheorem{corollary}[theorem]{Corollary}
-\theoremstyle{definition}
-\newtheorem{definition}[theorem]{Definition}
-\newtheorem{assumption}[theorem]{Assumption}
-\theoremstyle{remark}
-\newtheorem{remark}[theorem]{Remark}
-
-% Todonotes is useful during development; simply uncomment the next line
-%    and comment out the line below the next line to turn off comments
-%\usepackage[disable,textsize=tiny]{todonotes}
-\usepackage[textsize=tiny]{todonotes}
-
-% The \icmltitle you define below is probably too long as a header.
-% Therefore, a short form for the running title is supplied here:
-\icmltitlerunning{Submission and Formatting Instructions for ICML 2026}
-
-\begin{document}
-
-\twocolumn[
-  \icmltitle{Submission and Formatting Instructions for \\
-    International Conference on Machine Learning (ICML 2026)}
-
-  % It is OKAY to include author information, even for blind submissions: the
-  % style file will automatically remove it for you unless you've provided
-  % the [accepted] option to the icml2026 package.
-
-  % List of affiliations: The first argument should be a (short) identifier you
-  % will use later to specify author affiliations Academic affiliations
-  % should list Department, University, City, Region, Country Industry
-  % affiliations should list Company, City, Region, Country
-
-  % You can specify symbols, otherwise they are numbered in order. Ideally, you
-  % should not use this facility. Affiliations will be numbered in order of
-  % appearance and this is the preferred way.
-  \icmlsetsymbol{equal}{*}
-
-  \begin{icmlauthorlist}
-    \icmlauthor{Firstname1 Lastname1}{equal,yyy}
-    \icmlauthor{Firstname2 Lastname2}{equal,yyy,comp}
-    \icmlauthor{Firstname3 Lastname3}{comp}
-    \icmlauthor{Firstname4 Lastname4}{sch}
-    \icmlauthor{Firstname5 Lastname5}{yyy}
-    \icmlauthor{Firstname6 Lastname6}{sch,yyy,comp}
-    \icmlauthor{Firstname7 Lastname7}{comp}
-    %\icmlauthor{}{sch}
-    \icmlauthor{Firstname8 Lastname8}{sch}
-    \icmlauthor{Firstname8 Lastname8}{yyy,comp}
-    %\icmlauthor{}{sch}
-    %\icmlauthor{}{sch}
-  \end{icmlauthorlist}
-
-  \icmlaffiliation{yyy}{Department of XXX, University of YYY, Location, Country}
-  \icmlaffiliation{comp}{Company Name, Location, Country}
-  \icmlaffiliation{sch}{School of ZZZ, Institute of WWW, Location, Country}
-
-  \icmlcorrespondingauthor{Firstname1 Lastname1}{first1.last1@xxx.edu}
-  \icmlcorrespondingauthor{Firstname2 Lastname2}{first2.last2@www.uk}
-
-  % You may provide any keywords that you find helpful for describing your
-  % paper; these are used to populate the "keywords" metadata in the PDF but
-  % will not be shown in the document
-  \icmlkeywords{Machine Learning, ICML}
-
-  \vskip 0.3in
-]
-
-% this must go after the closing bracket ] following \twocolumn[ ...
-
-% This command actually creates the footnote in the first column listing the
-% affiliations and the copyright notice. The command takes one argument, which
-% is text to display at the start of the footnote. The \icmlEqualContribution
-% command is standard text for equal contribution. Remove it (just {}) if you
-% do not need this facility.
-
-% Use ONE of the following lines. DO NOT remove the command.
-% If you have no special notice, KEEP empty braces:
-\printAffiliationsAndNotice{}  % no special notice (required even if empty)
-% Or, if applicable, use the standard equal contribution text:
-% \printAffiliationsAndNotice{\icmlEqualContribution}
-
-\begin{abstract}
-  This document provides a basic paper template and submission guidelines.
-  Abstracts must be a single paragraph, ideally between 4--6 sentences long.
-  Gross violations will trigger corrections at the camera-ready phase.
-\end{abstract}
-
-\section{Electronic Submission}
-
-Submission to ICML 2026 will be entirely electronic, via a web site
-(not email). Information about the submission process and \LaTeX\ templates
-are available on the conference web site at:
-\begin{center}
-  \texttt{http://icml.cc/}
-\end{center}
-
-The guidelines below will be enforced for initial submissions and
-camera-ready copies. Here is a brief summary:
-\begin{itemize}
-  \item Submissions must be in PDF\@.
-  \item If your paper has appendices, submit the appendix together with the
-        main body and the references \textbf{as a single file}. Reviewers will not
-        look for appendices as a separate PDF file. So if you submit such an extra
-        file, reviewers will very likely miss it.
-  \item Page limit: The main body of the paper has to be fitted to 8 pages,
-        excluding references and appendices; the space for the latter two is not
-        limited in pages, but the total file size may not exceed 10MB. For the
-        final version of the paper, authors can add one extra page to the main
-        body.
-  \item \textbf{Do not include author information or acknowledgements} in your
-        initial submission.
-  \item Your paper should be in \textbf{10 point Times font}.
-  \item Make sure your PDF file only uses Type-1 fonts.
-  \item Place figure captions \emph{under} the figure (and omit titles from
-        inside the graphic file itself). Place table captions \emph{over} the
-        table.
-  \item References must include page numbers whenever possible and be as
-        complete as possible. Place multiple citations in chronological order.
-  \item Do not alter the style template; in particular, do not compress the
-        paper format by reducing the vertical spaces.
-  \item Keep your abstract brief and self-contained, one paragraph and roughly
-        4--6 sentences. Gross violations will require correction at the
-        camera-ready phase. The title should have content words capitalized.
-\end{itemize}
-
-\subsection{Submitting Papers}
-
-\textbf{Anonymous Submission:} ICML uses double-blind review: no identifying
-author information may appear on the title page or in the paper
-itself. \cref{author info} gives further details.
-
-\medskip
-
-Authors must provide their manuscripts in \textbf{PDF} format.
-Furthermore, please make sure that files contain only embedded Type-1 fonts
-(e.g.,~using the program \texttt{pdffonts} in linux or using
-File/DocumentProperties/Fonts in Acrobat). Other fonts (like Type-3)
-might come from graphics files imported into the document.
-
-Authors using \textbf{Word} must convert their document to PDF\@. Most
-of the latest versions of Word have the facility to do this
-automatically. Submissions will not be accepted in Word format or any
-format other than PDF\@. Really. We're not joking. Don't send Word.
-
-Those who use \textbf{\LaTeX} should avoid including Type-3 fonts.
-Those using \texttt{latex} and \texttt{dvips} may need the following
-two commands:
-
-{\footnotesize
-\begin{verbatim}
-dvips -Ppdf -tletter -G0 -o paper.ps paper.dvi
-ps2pdf paper.ps
-\end{verbatim}}
-It is a zero following the ``-G'', which tells dvips to use
-the config.pdf file. Newer \TeX\ distributions don't always need this
-option.
-
-Using \texttt{pdflatex} rather than \texttt{latex}, often gives better
-results. This program avoids the Type-3 font problem, and supports more
-advanced features in the \texttt{microtype} package.
-
-\textbf{Graphics files} should be a reasonable size, and included from
-an appropriate format. Use vector formats (.eps/.pdf) for plots,
-lossless bitmap formats (.png) for raster graphics with sharp lines, and
-jpeg for photo-like images.
-
-The style file uses the \texttt{hyperref} package to make clickable
-links in documents. If this causes problems for you, add
-\texttt{nohyperref} as one of the options to the \texttt{icml2026}
-usepackage statement.
-
-\subsection{Submitting Final Camera-Ready Copy}
-
-The final versions of papers accepted for publication should follow the
-same format and naming convention as initial submissions, except that
-author information (names and affiliations) should be given. See
-\cref{final author} for formatting instructions.
-
-The footnote, ``Preliminary work. Under review by the International
-Conference on Machine Learning (ICML). Do not distribute.'' must be
-modified to ``\textit{Proceedings of the
-  $\mathit{43}^{rd}$ International Conference on Machine Learning},
-Seoul, South Korea, PMLR 306, 2026.
-Copyright 2026 by the author(s).''
-
-For those using the \textbf{\LaTeX} style file, this change (and others) is
-handled automatically by simply changing
-$\mathtt{\backslash usepackage\{icml2026\}}$ to
-$$\mathtt{\backslash usepackage[accepted]\{icml2026\}}$$
-Authors using \textbf{Word} must edit the
-footnote on the first page of the document themselves.
-
-Camera-ready copies should have the title of the paper as running head
-on each page except the first one. The running title consists of a
-single line centered above a horizontal rule which is $1$~point thick.
-The running head should be centered, bold and in $9$~point type. The
-rule should be $10$~points above the main text. For those using the
-\textbf{\LaTeX} style file, the original title is automatically set as running
-head using the \texttt{fancyhdr} package which is included in the ICML
-2026 style file package. In case that the original title exceeds the
-size restrictions, a shorter form can be supplied by using
-
-\verb|\icmltitlerunning{...}|
-
-just before $\mathtt{\backslash begin\{document\}}$.
-Authors using \textbf{Word} must edit the header of the document themselves.
-
-\section{Format of the Paper}
-
-All submissions must follow the specified format.
-
-\subsection{Dimensions}
-
-The text of the paper should be formatted in two columns, with an
-overall width of 6.75~inches, height of 9.0~inches, and 0.25~inches
-between the columns. The left margin should be 0.75~inches and the top
-margin 1.0~inch (2.54~cm). The right and bottom margins will depend on
-whether you print on US letter or A4 paper, but all final versions
-must be produced for US letter size.
-Do not write anything on the margins.
-
-The paper body should be set in 10~point type with a vertical spacing
-of 11~points. Please use Times typeface throughout the text.
-
-\subsection{Title}
-
-The paper title should be set in 14~point bold type and centered
-between two horizontal rules that are 1~point thick, with 1.0~inch
-between the top rule and the top edge of the page. Capitalize the
-first letter of content words and put the rest of the title in lower
-case.
-You can use TeX math in the title (we suggest sparingly),
-but no custom macros, images, or other TeX commands.
-Please make sure that accents, special characters, etc., are entered using
-TeX commands and not using non-English characters.
-
-\subsection{Author Information for Submission}
-\label{author info}
-
-ICML uses double-blind review, so author information must not appear. If
-you are using \LaTeX\/ and the \texttt{icml2026.sty} file, use
-\verb+\icmlauthor{...}+ to specify authors and \verb+\icmlaffiliation{...}+
-to specify affiliations. (Read the TeX code used to produce this document for
-an example usage.) The author information will not be printed unless
-\texttt{accepted} is passed as an argument to the style file. Submissions that
-include the author information will not be reviewed.
-
-\subsubsection{Self-Citations}
-
-If you are citing published papers for which you are an author, refer
-to yourself in the third person. In particular, do not use phrases
-that reveal your identity (e.g., ``in previous work \cite{langley00}, we
-have shown \ldots'').
-
-Do not anonymize citations in the reference section. The only exception are manuscripts that are
-not yet published (e.g., under submission). If you choose to refer to
-such unpublished manuscripts \cite{anonymous}, anonymized copies have
-to be submitted
-as Supplementary Material via OpenReview\@. However, keep in mind that an ICML
-paper should be self contained and should contain sufficient detail
-for the reviewers to evaluate the work. In particular, reviewers are
-not required to look at the Supplementary Material when writing their
-review (they are not required to look at more than the first $8$ pages of the submitted document).
-
-\subsubsection{Camera-Ready Author Information}
-\label{final author}
-
-If a paper is accepted, a final camera-ready copy must be prepared.
-%
-For camera-ready papers, author information should start 0.3~inches below the
-bottom rule surrounding the title. The authors' names should appear in 10~point
-bold type, in a row, separated by white space, and centered. Author names should
-not be broken across lines. Unbolded superscripted numbers, starting 1, should
-be used to refer to affiliations.
-
-Affiliations should be numbered in the order of appearance. A single footnote
-block of text should be used to list all the affiliations. (Academic
-affiliations should list Department, University, City, State/Region, Country.
-Similarly for industrial affiliations.)
-
-Each distinct affiliations should be listed once. If an author has multiple
-affiliations, multiple superscripts should be placed after the name, separated
-by thin spaces. If the authors would like to highlight equal contribution by
-multiple first authors, those authors should have an asterisk placed after their
-name in superscript, and the term ``\textsuperscript{*}Equal contribution"
-should be placed in the footnote block ahead of the list of affiliations. A
-list of corresponding authors and their emails (in the format Full Name
-\textless{}email@domain.com\textgreater{}) can follow the list of affiliations.
-Ideally only one or two names should be listed.
-
-A sample file with author names is included in the ICML2026 style file
-package. Turn on the \texttt{[accepted]} option to the stylefile to
-see the names rendered. All of the guidelines above are implemented
-by the \LaTeX\ style file.
-
-\subsection{Abstract}
-
-The paper abstract should begin in the left column, 0.4~inches below the final
-address. The heading `Abstract' should be centered, bold, and in 11~point type.
-The abstract body should use 10~point type, with a vertical spacing of
-11~points, and should be indented 0.25~inches more than normal on left-hand and
-right-hand margins. Insert 0.4~inches of blank space after the body. Keep your
-abstract brief and self-contained, limiting it to one paragraph and roughly 4--6
-sentences. Gross violations will require correction at the camera-ready phase.
-
-\subsection{Partitioning the Text}
-
-You should organize your paper into sections and paragraphs to help readers
-place a structure on the material and understand its contributions.
-
-\subsubsection{Sections and Subsections}
-
-Section headings should be numbered, flush left, and set in 11~pt bold type
-with the content words capitalized. Leave 0.25~inches of space before the
-heading and 0.15~inches after the heading.
-
-Similarly, subsection headings should be numbered, flush left, and set in 10~pt
-bold type with the content words capitalized. Leave
-0.2~inches of space before the heading and 0.13~inches afterward.
-
-Finally, subsubsection headings should be numbered, flush left, and set in
-10~pt small caps with the content words capitalized. Leave
-0.18~inches of space before the heading and 0.1~inches after the heading.
-
-Please use no more than three levels of headings.
-
-\subsubsection{Paragraphs and Footnotes}
-
-Within each section or subsection, you should further partition the paper into
-paragraphs. Do not indent the first line of a given paragraph, but insert a
-blank line between succeeding ones.
-
-You can use footnotes\footnote{Footnotes should be complete sentences.}
-to provide readers with additional information about a topic without
-interrupting the flow of the paper. Indicate footnotes with a number in the
-text where the point is most relevant. Place the footnote in 9~point type at
-the bottom of the column in which it appears. Precede the first footnote in a
-column with a horizontal rule of 0.8~inches.\footnote{Multiple footnotes can
-  appear in each column, in the same order as they appear in the text,
-  but spread them across columns and pages if possible.}
-
-\begin{figure}[ht]
-  \vskip 0.2in
-  \begin{center}
-    \centerline{\includegraphics[width=\columnwidth]{icml_numpapers}}
-    \caption{
-      Historical locations and number of accepted papers for International
-      Machine Learning Conferences (ICML 1993 -- ICML 2008) and International
-      Workshops on Machine Learning (ML 1988 -- ML 1992). At the time this
-      figure was produced, the number of accepted papers for ICML 2008 was
-      unknown and instead estimated.
-    }
-    \label{icml-historical}
-  \end{center}
-\end{figure}
-
-\subsection{Figures}
-
-You may want to include figures in the paper to illustrate your approach and
-results. Such artwork should be centered, legible, and separated from the text.
-Lines should be dark and at least 0.5~points thick for purposes of
-reproduction, and text should not appear on a gray background.
-
-Label all distinct components of each figure. If the figure takes the form of a
-graph, then give a name for each axis and include a legend that briefly
-describes each curve. Do not include a title inside the figure; instead, the
-caption should serve this function.
-
-Number figures sequentially, placing the figure number and caption \emph{after}
-the graphics, with at least 0.1~inches of space before the caption and
-0.1~inches after it, as in \cref{icml-historical}. The figure caption should be
-set in 9~point type and centered unless it runs two or more lines, in which
-case it should be flush left. You may float figures to the top or bottom of a
-column, and you may set wide figures across both columns (use the environment
-\texttt{figure*} in \LaTeX). Always place two-column figures at the top or
-bottom of the page.
-
-\subsection{Algorithms}
-
-If you are using \LaTeX, please use the ``algorithm'' and ``algorithmic''
-environments to format pseudocode. These require the corresponding stylefiles,
-algorithm.sty and algorithmic.sty, which are supplied with this package.
-\cref{alg:example} shows an example.
-
-\begin{algorithm}[tb]
-  \caption{Bubble Sort}
-  \label{alg:example}
-  \begin{algorithmic}
-    \STATE {\bfseries Input:} data $x_i$, size $m$
-    \REPEAT
-    \STATE Initialize $noChange = true$.
-    \FOR{$i=1$ {\bfseries to} $m-1$}
-    \IF{$x_i > x_{i+1}$}
-    \STATE Swap $x_i$ and $x_{i+1}$
-    \STATE $noChange = false$
-    \ENDIF
-    \ENDFOR
-    \UNTIL{$noChange$ is $true$}
-  \end{algorithmic}
-\end{algorithm}
-
-
-\subsection{Tables}
-
-You may also want to include tables that summarize material. Like figures,
-these should be centered, legible, and numbered consecutively. However, place
-the title \emph{above} the table with at least 0.1~inches of space before the
-title and the same after it, as in \cref{sample-table}. The table title should
-be set in 9~point type and centered unless it runs two or more lines, in which
-case it should be flush left.
-
-% Note use of \abovespace and \belowspace to get reasonable spacing
-% above and below tabular lines.
-
-\begin{table}[t]
-  \caption{Classification accuracies for naive Bayes and flexible
-    Bayes on various data sets.}
-  \label{sample-table}
-  \begin{center}
-    \begin{small}
-      \begin{sc}
-        \begin{tabular}{lcccr}
-          \toprule
-          Data set  & Naive         & Flexible      & Better?  \\
-          \midrule
-          Breast    & 95.9$\pm$ 0.2 & 96.7$\pm$ 0.2 & $\surd$  \\
-          Cleveland & 83.3$\pm$ 0.6 & 80.0$\pm$ 0.6 & $\times$ \\
-          Glass2    & 61.9$\pm$ 1.4 & 83.8$\pm$ 0.7 & $\surd$  \\
-          Credit    & 74.8$\pm$ 0.5 & 78.3$\pm$ 0.6 &          \\
-          Horse     & 73.3$\pm$ 0.9 & 69.7$\pm$ 1.0 & $\times$ \\
-          Meta      & 67.1$\pm$ 0.6 & 76.5$\pm$ 0.5 & $\surd$  \\
-          Pima      & 75.1$\pm$ 0.6 & 73.9$\pm$ 0.5 &          \\
-          Vehicle   & 44.9$\pm$ 0.6 & 61.5$\pm$ 0.4 & $\surd$  \\
-          \bottomrule
-        \end{tabular}
-      \end{sc}
-    \end{small}
-  \end{center}
-  \vskip -0.1in
-\end{table}
-
-Tables contain textual material, whereas figures contain graphical material.
-Specify the contents of each row and column in the table's topmost row. Again,
-you may float tables to a column's top or bottom, and set wide tables across
-both columns. Place two-column tables at the top or bottom of the page.
-
-\subsection{Theorems and Such}
-The preferred way is to number definitions, propositions, lemmas, etc.
-consecutively, within sections, as shown below.
-\begin{definition}
-  \label{def:inj}
-  A function $f:X \to Y$ is injective if for any $x,y\in X$ different, $f(x)\ne
-    f(y)$.
-\end{definition}
-Using \cref{def:inj} we immediate get the following result:
-\begin{proposition}
-  If $f$ is injective mapping a set $X$ to another set $Y$,
-  the cardinality of $Y$ is at least as large as that of $X$
-\end{proposition}
-\begin{proof}
-  Left as an exercise to the reader.
-\end{proof}
-\cref{lem:usefullemma} stated next will prove to be useful.
-\begin{lemma}
-  \label{lem:usefullemma}
-  For any $f:X \to Y$ and $g:Y\to Z$ injective functions, $f \circ g$ is
-  injective.
-\end{lemma}
-\begin{theorem}
-  \label{thm:bigtheorem}
-  If $f:X\to Y$ is bijective, the cardinality of $X$ and $Y$ are the same.
-\end{theorem}
-An easy corollary of \cref{thm:bigtheorem} is the following:
-\begin{corollary}
-  If $f:X\to Y$ is bijective,
-  the cardinality of $X$ is at least as large as that of $Y$.
-\end{corollary}
-\begin{assumption}
-  The set $X$ is finite.
-  \label{ass:xfinite}
-\end{assumption}
-\begin{remark}
-  According to some, it is only the finite case (cf. \cref{ass:xfinite}) that
-  is interesting.
-\end{remark}
-%restatable
-
-\subsection{Citations and References}
-
-Please use APA reference format regardless of your formatter or word processor.
-If you rely on the \LaTeX\/ bibliographic facility, use \texttt{natbib.sty} and
-\texttt{icml2026.bst} included in the style-file package to obtain this format.
-
-Citations within the text should include the authors' last names and year. If
-the authors' names are included in the sentence, place only the year in
-parentheses, for example when referencing Arthur Samuel's pioneering work
-\yrcite{Samuel59}. Otherwise place the entire reference in parentheses with the
-authors and year separated by a comma \cite{Samuel59}. List multiple references
-separated by semicolons \cite{kearns89,Samuel59,mitchell80}. Use the `et~al.'
-construct only for citations with three or more authors or after listing all
-authors to a publication in an earlier reference \cite{MachineLearningI}.
-
-Authors should cite their own work in the third person in the initial version
-of their paper submitted for blind review. Please refer to \cref{author info}
-for detailed instructions on how to cite your own papers.
-
-Use an unnumbered first-level section heading for the references, and use a
-hanging indent style, with the first line of the reference flush against the
-left margin and subsequent lines indented by 10 points. The references at the
-end of this document give examples for journal articles \cite{Samuel59},
-conference publications \cite{langley00}, book chapters \cite{Newell81}, books
-\cite{DudaHart2nd}, edited volumes \cite{MachineLearningI}, technical reports
-\cite{mitchell80}, and dissertations \cite{kearns89}.
-
-Alphabetize references by the surnames of the first authors, with single author
-entries preceding multiple author entries. Order references for the same
-authors by year of publication, with the earliest first. Make sure that each
-reference includes all relevant information (e.g., page numbers).
-
-Please put some effort into making references complete, presentable, and
-consistent, e.g. use the actual current name of authors. If using bibtex,
-please protect capital letters of names and abbreviations in titles, for
-example, use \{B\}ayesian or \{L\}ipschitz in your .bib file.
-
-\section*{Accessibility}
-
-Authors are kindly asked to make their submissions as accessible as possible
-for everyone including people with disabilities and sensory or neurological
-differences. Tips of how to achieve this and what to pay attention to will be
-provided on the conference website \url{http://icml.cc/}.
-
-\section*{Software and Data}
-
-If a paper is accepted, we strongly encourage the publication of software and
-data with the camera-ready version of the paper whenever appropriate. This can
-be done by including a URL in the camera-ready copy. However, \textbf{do not}
-include URLs that reveal your institution or identity in your submission for
-review. Instead, provide an anonymous URL or upload the material as
-``Supplementary Material'' into the OpenReview reviewing system. Note that
-reviewers are not required to look at this material when writing their review.
-
-% Acknowledgements should only appear in the accepted version.
-\section*{Acknowledgements}
-
-\textbf{Do not} include acknowledgements in the initial version of the paper
-submitted for blind review.
-
-If a paper is accepted, the final camera-ready version can (and usually should)
-include acknowledgements.  Such acknowledgements should be placed at the end of
-the section, in an unnumbered section that does not count towards the paper
-page limit. Typically, this will include thanks to reviewers who gave useful
-comments, to colleagues who contributed to the ideas, and to funding agencies
-and corporate sponsors that provided financial support.
-
-\section*{Impact Statement}
-
-Authors are \textbf{required} to include a statement of the potential broader
-impact of their work, including its ethical aspects and future societal
-consequences. This statement should be in an unnumbered section at the end of
-the paper (co-located with Acknowledgements -- the two may appear in either
-order, but both must be before References), and does not count toward the paper
-page limit. In many cases, where the ethical impacts and expected societal
-implications are those that are well established when advancing the field of
-Machine Learning, substantial discussion is not required, and a simple
-statement such as the following will suffice:
-
-``This paper presents work whose goal is to advance the field of Machine
-Learning. There are many potential societal consequences of our work, none
-which we feel must be specifically highlighted here.''
-
-The above statement can be used verbatim in such cases, but we encourage
-authors to think about whether there is content which does warrant further
-discussion, as this statement will be apparent if the paper is later flagged
-for ethics review.
-
-% In the unusual situation where you want a paper to appear in the
-% references without citing it in the main text, use \nocite
-\nocite{langley00}
-
-\bibliography{example_paper}
-\bibliographystyle{icml2026}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% APPENDIX
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\newpage
-\appendix
-\onecolumn
-\section{You \emph{can} have an appendix here.}
-
-You can have as much text here as you want. The main body must be at most $8$
-pages long. For the final version, one more page can be added. If you want, you
-can use an appendix like this one.
-
-The $\mathtt{\backslash onecolumn}$ command above can be kept in place if you
-prefer a one-column appendix, or can be removed if you prefer a two-column
-appendix.  Apart from this possible change, the style (font size, spacing,
-margins, page numbering, etc.) should be kept the same as the main body.
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\end{document}
-
-% This document was modified from the file originally made available by
-% Pat Langley and Andrea Danyluk for ICML-2K. This version was created
-% by Iain Murray in 2018, and modified by Alexandre Bouchard in
-% 2019 and 2021 and by Csaba Szepesvari, Gang Niu and Sivan Sabato in 2022.
-% Modified again in 2023 and 2024 by Sivan Sabato and Jonathan Scarlett.
-% Previous contributors include Dan Roy, Lise Getoor and Tobias
-% Scheffer, which was slightly modified from the 2010 version by
-% Thorsten Joachims & Johannes Fuernkranz, slightly modified from the
-% 2009 version by Kiri Wagstaff and Sam Roweis's 2008 version, which is
-% slightly modified from Prasad Tadepalli's 2007 version which is a
-% lightly changed version of the previous year's version by Andrew
-% Moore, which was in turn edited from those of Kristian Kersting and
-% Codrina Lauth. Alex Smola contributed to the algorithmic style files.