@metamesh/modeling 0.19.0 → 0.20.0

package/dist/docs/reference/model/knuckleHinge.md

@@ -24,7 +24,6 @@ Unspecified resolution inherits the evaluating session. Axis direction is +X wit
 Each half's `chamfer` bevels its barrel outer rims and all web edges. Consumers own plates, screw holes,
 pin retention, fit policy, and part placement. Added mounting material must preserve the bores.
 No opening range or collision freedom is implied for arbitrary caller attachments.
-Compiled Generator packages using this operation require runtime 10.0.0 or newer in major 10.
 
 ## Parameters
 
@@ -44,10 +43,10 @@ Compiled Generator packages using this operation require runtime 10.0.0 or newer
 - [KnuckleHinge](KnuckleHinge-type.md)
 - [KnuckleHingeOptions](KnuckleHingeOptions.md)
 
-## Supported imports
+## Import
 
 ```ts
 import { knuckleHinge } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/linearPattern.md

@@ -12,10 +12,14 @@ Repeats one solid along a normalized direction.
 
 ## Example: Three copies along X
 
+
+
 ```ts
 linearPattern(box({ size: 4 }), { count: 3, spacing: 10 });
 ```
 
+
+
 Repeats one solid along a normalized direction.
 
 ### Parameters
@@ -24,6 +28,8 @@ Repeats one solid along a normalized direction.
 
 **`source`** · [`PatternSource`](PatternSource.md) · Required
 
+Recipe or factory called once per copy, in zero-based order.
+
 
 
 <a id="options"></a>
@@ -52,6 +58,8 @@ Repeats a filled Section along an XY direction, defaulting to +X.
 
 **`source`** · [`PatternSource`](PatternSource.md)\<[`Section`](Section.md)\> · Required
 
+Recipe or factory called once per copy, in zero-based order.
+
 
 
 <a id="options-1"></a>
@@ -67,7 +75,6 @@ readonly [`Section`](Section.md)[]
 
 ## Related APIs
 
-- [LinearPatternOptions](../geometry/LinearPatternOptions.md)
 - [PatternSource](PatternSource.md)
 - [Section](Section.md)
 - [Solid](Solid.md)
@@ -76,12 +83,12 @@ readonly [`Section`](Section.md)[]
 
 - [Named anchors and custom frames](../../guides/transforms-and-placement.md#named-anchors-and-custom-frames)
 - [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
-- [Fluent values and standalone algorithms](../../guides/geometry-values.md#choose-fluent-values-or-standalone-algorithms)
+- [Fluent values and standalone algorithms](../../guides/geometry-values.md#fluent-values-plain-data-and-descriptors)
 
-## Supported imports
+## Import
 
 ```ts
 import { linearPattern } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/loft.md

@@ -1,12 +1,12 @@
 # loft
 
-Lofts Sections and point loops at z heights or frames. Known primitive landmarks are retained; other profiles default to direct correspondence, preserving their supplied seams.
+Lofts Sections and point contours at z heights or affine transforms. Known primitive landmarks are retained; other profiles default to direct correspondence, preserving their supplied seams.
 
 ## Call Signature
 
 
 
-**loft**(`stations`: readonly [`LoftStation`](LoftStation.md)[], `options?`: [`LoftOptions`](../geometry/LoftOptions.md)): [`Solid`](Solid.md)
+**loft**(`stations`: readonly [`LoftStation`](LoftStation.md)[], `options?`: [`LoftOptions`](LoftOptions.md)): [`Solid`](Solid.md)
 
 
 
@@ -23,7 +23,7 @@ loft([
 
 
 
-Lofts Sections and point loops at z heights or frames. Known primitive landmarks are retained;
+Lofts Sections and point contours at z heights or affine transforms. Known primitive landmarks are retained;
 other profiles default to direct correspondence, preserving their supplied seams.
 
 ### Parameters
@@ -32,33 +32,35 @@ other profiles default to direct correspondence, preserving their supplied seams
 
 **`stations`** · readonly [`LoftStation`](LoftStation.md)[] · Required
 
+Ordered profiles at millimetre Z heights or affine placements.
+
 
 
 <a id="options"></a>
 
-**`options`** · [`LoftOptions`](../geometry/LoftOptions.md) · Optional
+**`options`** · [`LoftOptions`](LoftOptions.md) · Optional
 
-- [`correspondence`](../geometry/LoftOptions.md#correspondence) · [`LoftCorrespondence`](../geometry/LoftCorrespondence.md) \| readonly [`LoftCorrespondence`](../geometry/LoftCorrespondence.md)[] · Optional
+- [`correspondence`](LoftOptions.md#correspondence) · [`LoftCorrespondence`](LoftCorrespondence.md) \| readonly [`LoftCorrespondence`](LoftCorrespondence.md)[] · Optional
 
   One method or one per consecutive station gap. Omitted preserves known primitive landmarks, including circle/ellipse-to-rectangle corners, and otherwise uses direct correspondence with the supplied seams.
 
-- [`distribution`](../geometry/LoftOptions.md#distribution) · `"perimeter"` \| `"segments"` · Optional
+- [`distribution`](LoftOptions.md#distribution) · `"perimeter"` \| `"segments"` · Optional
 
   Extra points follow edge length or distribute equally across existing segments. Defaults to perimeter for direct/reindex, or segments when any distance method is selected; distance methods require segments.
 
-- [`refine`](../geometry/LoftOptions.md#refine) · `number` \| readonly `number`[] · Optional
+- [`refine`](LoftOptions.md#refine) · `number` \| readonly `number`[] · Optional
 
   Positive integer point-density multiplier, uniformly or per input profile. Original vertices are retained. Defaults to one.
 
-- [`slices`](../geometry/LoftOptions.md#slices) · `number` \| readonly `number`[] · Optional
+- [`slices`](LoftOptions.md#slices) · `number` \| readonly `number`[] · Optional
 
-  Nonnegative count of world-linearly interpolated profiles, uniformly or per gap. Defaults to zero.
+  Positive longitudinal interval count, uniformly or per supplied station gap. Each gap with n slices has n - 1 inserted profiles. Defaults to one; placed world vertices interpolate linearly.
 
-- [`resolution`](../geometry/LoftOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
+- [`resolution`](LoftOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Physical curve policy for retained primitives, and maximum edge length for point data. Exact primitive curve counts take precedence.
 
-- [`limits`](../geometry/LoftOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
+- [`limits`](LoftOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and sampling budgets; native operations may only lower host ceilings.
 
@@ -72,7 +74,7 @@ other profiles default to direct correspondence, preserving their supplied seams
 
 
 
-**loft**(`stations`: readonly [`CorrespondingProfileStation`](../geometry/CorrespondingProfileStation.md)[], `options?`: [`LoftOptions`](../geometry/LoftOptions.md)): [`Solid`](Solid.md)
+**loft**(`stations`: readonly [`CorrespondingProfileStation`](../geometry/CorrespondingProfileStation.md)[], `options?`: [`LoftOptions`](LoftOptions.md)): [`Solid`](Solid.md)
 
 
 
@@ -84,33 +86,35 @@ Lofts explicit corresponding contours, including holes and collapsed logical slo
 
 **`stations`** · readonly [`CorrespondingProfileStation`](../geometry/CorrespondingProfileStation.md)[] · Required
 
+Ordered profiles at millimetre Z heights or affine placements.
+
 
 
 <a id="options-1"></a>
 
-**`options`** · [`LoftOptions`](../geometry/LoftOptions.md) · Optional
+**`options`** · [`LoftOptions`](LoftOptions.md) · Optional
 
-- [`correspondence`](../geometry/LoftOptions.md#correspondence) · [`LoftCorrespondence`](../geometry/LoftCorrespondence.md) \| readonly [`LoftCorrespondence`](../geometry/LoftCorrespondence.md)[] · Optional
+- [`correspondence`](LoftOptions.md#correspondence) · [`LoftCorrespondence`](LoftCorrespondence.md) \| readonly [`LoftCorrespondence`](LoftCorrespondence.md)[] · Optional
 
   One method or one per consecutive station gap. Omitted preserves known primitive landmarks, including circle/ellipse-to-rectangle corners, and otherwise uses direct correspondence with the supplied seams.
 
-- [`distribution`](../geometry/LoftOptions.md#distribution) · `"perimeter"` \| `"segments"` · Optional
+- [`distribution`](LoftOptions.md#distribution) · `"perimeter"` \| `"segments"` · Optional
 
   Extra points follow edge length or distribute equally across existing segments. Defaults to perimeter for direct/reindex, or segments when any distance method is selected; distance methods require segments.
 
-- [`refine`](../geometry/LoftOptions.md#refine) · `number` \| readonly `number`[] · Optional
+- [`refine`](LoftOptions.md#refine) · `number` \| readonly `number`[] · Optional
 
   Positive integer point-density multiplier, uniformly or per input profile. Original vertices are retained. Defaults to one.
 
-- [`slices`](../geometry/LoftOptions.md#slices) · `number` \| readonly `number`[] · Optional
+- [`slices`](LoftOptions.md#slices) · `number` \| readonly `number`[] · Optional
 
-  Nonnegative count of world-linearly interpolated profiles, uniformly or per gap. Defaults to zero.
+  Positive longitudinal interval count, uniformly or per supplied station gap. Each gap with n slices has n - 1 inserted profiles. Defaults to one; placed world vertices interpolate linearly.
 
-- [`resolution`](../geometry/LoftOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
+- [`resolution`](LoftOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Physical curve policy for retained primitives, and maximum edge length for point data. Exact primitive curve counts take precedence.
 
-- [`limits`](../geometry/LoftOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
+- [`limits`](LoftOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and sampling budgets; native operations may only lower host ceilings.
 
@@ -123,23 +127,23 @@ Lofts explicit corresponding contours, including holes and collapsed logical slo
 
 ## Related APIs
 
-- [CorrespondingProfileStation](../geometry/CorrespondingProfileStation.md)
-- [LoftOptions](../geometry/LoftOptions.md)
+- [LoftOptions](LoftOptions.md)
 - [LoftStation](LoftStation.md)
 - [Solid](Solid.md)
 
 ## Guides
 
 - [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Chamfer a twisted extrusion](../../guides/profiles-and-extrusion.md#chamfer-a-twisted-extrusion)
 - [Revolve a radial profile](../../guides/profiles-and-extrusion.md#revolve-a-radial-profile)
 - [Rotation-minimizing path sweep](../../guides/sweeps-and-lofts.md#rotation-minimizing-path-sweep)
 - [Matched-section loft](../../guides/sweeps-and-lofts.md#matched-section-loft)
 - [Choose a modeling path](../../guides/recipes.md#choose-a-technique)
 
-## Supported imports
+## Import
 
 ```ts
 import { loft } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/minkowskiSum.md

@@ -1,6 +1,6 @@
 # minkowskiSum
 
-Three-dimensional Minkowski sum.
+Declares the three-dimensional Minkowski sum of two Solid recipes.
 
 **minkowskiSum**(`a`: [`Solid`](Solid.md), `b`: [`Solid`](Solid.md)): [`Solid`](Solid.md)
 
@@ -35,10 +35,10 @@ Three-dimensional Minkowski sum.
 - [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
 - [Join an independently modeled feature](../../guides/solid-joins.md#join-an-independently-modeled-feature)
 
-## Supported imports
+## Import
 
 ```ts
 import { minkowskiSum } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/pathPattern.md

@@ -12,10 +12,14 @@ Physical arc-length copies along a sampled path, with optional tangent orientati
 
 ## Example: Copies along a bent path
 
+
+
 ```ts
 pathPattern(box({ size: 4 }), [[0, 0, 0], [20, 0, 0], [20, 20, 0]], { count: 5 });
 ```
 
+
+
 Physical arc-length copies along a sampled path, with optional tangent orientation.
 
 ### Parameters
@@ -24,12 +28,16 @@ Physical arc-length copies along a sampled path, with optional tangent orientati
 
 **`source`** · [`PatternSource`](PatternSource.md) · Required
 
+Recipe or factory called once per copy, in zero-based order.
+
 
 
 <a id="path"></a>
 
 **`path`** · [`Path3Input`](../geometry/Path3Input.md) · Required
 
+Path in millimetres; spacing uses arc length.
+
 
 
 <a id="options"></a>
@@ -46,7 +54,7 @@ Physical arc-length copies along a sampled path, with optional tangent orientati
 
 - [`orientation`](../geometry/PathPatternOptions.md#orientation) · `"fixed"` \| `"tangent"` · Optional
 
-  Preserve orientation, or align local +X for Sections / +Z for Solids to the tangent. Defaults to fixed.
+  Preserve orientation, or align local +X for Sections / +Z for Solids to the outgoing edge tangent. An open final endpoint uses its incoming edge. Defaults to fixed.
 
 
 
@@ -71,12 +79,16 @@ to the path tangent counterclockwise, preserving the XY plane.
 
 **`source`** · [`PatternSource`](PatternSource.md)\<[`Section`](Section.md)\> · Required
 
+Recipe or factory called once per copy, in zero-based order.
+
 
 
 <a id="path-1"></a>
 
 **`path`** · [`Path2Input`](../geometry/Path2Input.md) · Required
 
+Path in millimetres; spacing uses arc length.
+
 
 
 <a id="options-1"></a>
@@ -93,7 +105,7 @@ to the path tangent counterclockwise, preserving the XY plane.
 
 - [`orientation`](../geometry/PathPatternOptions.md#orientation) · `"fixed"` \| `"tangent"` · Optional
 
-  Preserve orientation, or align local +X for Sections / +Z for Solids to the tangent. Defaults to fixed.
+  Preserve orientation, or align local +X for Sections / +Z for Solids to the outgoing edge tangent. An open final endpoint uses its incoming edge. Defaults to fixed.
 
 
 
@@ -104,9 +116,6 @@ readonly [`Section`](Section.md)[]
 
 ## Related APIs
 
-- [Path2Input](../geometry/Path2Input.md)
-- [Path3Input](../geometry/Path3Input.md)
-- [PathPatternOptions](../geometry/PathPatternOptions.md)
 - [PatternSource](PatternSource.md)
 - [Section](Section.md)
 - [Solid](Solid.md)
@@ -115,12 +124,12 @@ readonly [`Section`](Section.md)[]
 
 - [Named anchors and custom frames](../../guides/transforms-and-placement.md#named-anchors-and-custom-frames)
 - [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
-- [Fluent values and standalone algorithms](../../guides/geometry-values.md#choose-fluent-values-or-standalone-algorithms)
+- [Fluent values and standalone algorithms](../../guides/geometry-values.md#fluent-values-plain-data-and-descriptors)
 
-## Supported imports
+## Import
 
 ```ts
 import { pathPattern } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/polygon.md

@@ -8,10 +8,14 @@ Fills one closed millimetre XY outline, explicit outer/hole topology, or compoun
 
 ## Example: Extrude a triangular plate
 
+
+
 ```ts
 polygon([[0, 0], [20, 0], [10, 12]]).extrude({ height: 3 });
 ```
 
+
+
 Closing edges are implicit. Compound contours use nonzero fill unless selected otherwise.
 Explicit topology must be simple and disjoint; compound winding may resolve overlaps.
 
@@ -21,6 +25,8 @@ Explicit topology must be simple and disjoint; compound winding may resolve over
 
 **`input`** · [`Path2Input`](../geometry/Path2Input.md) \| [`PolygonOptions`](PolygonOptions.md) · Required
 
+XY outline in millimetres, or explicit or compound topology.
+
 
 
 ## Returns
@@ -30,7 +36,6 @@ Explicit topology must be simple and disjoint; compound winding may resolve over
 
 ## Related APIs
 
-- [Path2Input](../geometry/Path2Input.md)
 - [PolygonOptions](PolygonOptions.md)
 - [Section](Section.md)
 
@@ -40,10 +45,10 @@ Explicit topology must be simple and disjoint; compound winding may resolve over
 - [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
 
-## Supported imports
+## Import
 
 ```ts
 import { polygon } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/radialPattern.md

@@ -12,11 +12,15 @@ Repeats one solid about an axis.
 
 ## Example: Six copies around Z
 
+
+
 ```ts
 const pin = cylinder({ height: 6, radius: 2 }).translate([12, 0, 0]);
 radialPattern(pin, { count: 6, axis: [0, 0, 1], angle: 60 });
 ```
 
+
+
 Repeats one solid about an axis.
 
 ### Parameters
@@ -25,6 +29,8 @@ Repeats one solid about an axis.
 
 **`source`** · [`PatternSource`](PatternSource.md) · Required
 
+Recipe or factory called once per copy, in zero-based order.
+
 
 
 <a id="options"></a>
@@ -53,6 +59,8 @@ Repeats a filled Section counterclockwise about a fixed XY pivot, using the impl
 
 **`source`** · [`PatternSource`](PatternSource.md)\<[`Section`](Section.md)\> · Required
 
+Recipe or factory called once per copy, in zero-based order.
+
 
 
 <a id="options-1"></a>
@@ -69,7 +77,6 @@ readonly [`Section`](Section.md)[]
 ## Related APIs
 
 - [PatternSource](PatternSource.md)
-- [RadialPatternOptions](../geometry/RadialPatternOptions.md)
 - [Section](Section.md)
 - [Solid](Solid.md)
 
@@ -77,12 +84,12 @@ readonly [`Section`](Section.md)[]
 
 - [Named anchors and custom frames](../../guides/transforms-and-placement.md#named-anchors-and-custom-frames)
 - [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
-- [Fluent values and standalone algorithms](../../guides/geometry-values.md#choose-fluent-values-or-standalone-algorithms)
+- [Fluent values and standalone algorithms](../../guides/geometry-values.md#fluent-values-plain-data-and-descriptors)
 
-## Supported imports
+## Import
 
 ```ts
 import { radialPattern } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/rectangle.md

@@ -8,10 +8,14 @@ Filled rectangular section with uniform or independently treated corners.
 
 ## Example: Round the corners
 
+
+
 ```ts
-rectangle({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
+rectangle({ size: [30, 20], treatment: { kind: "round", radius: 3 } }).extrude({ height: 3 });
 ```
 
+
+
 Use [rectangleContour](../geometry/rectangleContour.md) for sampled boundary coordinates,
 or [rectangleProfile](../geometry/rectangleProfile.md) to retain identified loft landmarks.
 
@@ -25,10 +29,6 @@ or [rectangleProfile](../geometry/rectangleProfile.md) to retain identified loft
 
   Positive uniform size or explicit XY extents in millimetres.
 
-- [`attachment`](RectangleOptions.md#attachment) · [`PrimitiveAttachmentOptions`](../geometry/PrimitiveAttachmentOptions.md) · Optional
-
-  Applied after local construction; Section attachment must preserve the XY plane.
-
 - [`center`](RectangleOptions.md#center) · `boolean` · Optional
 
   Center on XY; otherwise the minimum corner is the origin. Defaults to true.
@@ -41,6 +41,10 @@ or [rectangleProfile](../geometry/rectangleProfile.md) to retain identified loft
 
   Explicit sampling ceiling for the complete output profile.
 
+- [`attachment`](RectangleOptions.md#attachment) · [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md) · Optional
+
+  Applied after local construction; Section attachment must preserve the XY plane.
+
 
 
 ## Returns
@@ -59,10 +63,10 @@ or [rectangleProfile](../geometry/rectangleProfile.md) to retain identified loft
 - [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
 
-## Supported imports
+## Import
 
 ```ts
 import { rectangle } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/regularPolygon.md

@@ -8,10 +8,14 @@ Regular polygon with a vertex on +X.
 
 ## Example: Hexagonal section
 
+
+
 ```ts
-regularPolygon({ radius: 10, sides: 6, sizing: "face" });
+regularPolygon({ radius: 10, sides: 6, sizing: "face" }).extrude({ height: 3 });
 ```
 
+
+
 ## Parameters
 
 <a id="options"></a>
@@ -36,10 +40,10 @@ regularPolygon({ radius: 10, sides: 6, sizing: "face" });
 - [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
 
-## Supported imports
+## Import
 
 ```ts
 import { regularPolygon } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/revolve.md

@@ -2,45 +2,51 @@
 
 Revolves a filled Section or explicit corresponding radial/Z contours around +Z, with caps for partial sweeps. Use `section.revolve(options)` in fluent sequences, or this function for generic profile inputs.
 
-**revolve**(`shape`: [`Section`](Section.md) \| [`CorrespondingProfile`](../geometry/CorrespondingProfile.md), `options?`: [`RevolveOptions`](../geometry/RevolveOptions.md)): [`Solid`](Solid.md)
+**revolve**(`shape`: [`Section`](Section.md) \| [`CorrespondingProfile`](../geometry/CorrespondingProfile.md), `options?`: [`RevolveOptions`](RevolveOptions.md)): [`Solid`](Solid.md)
 
 
 
 ## Example: Revolve
 
+
+
 ```ts
-import { matchProfiles, revolve } from "@metamesh/modeling";
-import { rectangleProfile } from "@metamesh/modeling/geometry";
+import { revolve } from "@metamesh/modeling";
+import { matchProfiles, rectangleProfile } from "@metamesh/modeling/geometry";
 
 // Contour coordinates are [radius, Z].
 const [profile] = matchProfiles([rectangleProfile({ size: [4, 16], center: false })]);
 revolve(profile!, { degrees: 270 });
 ```
 
+
+
 ## Parameters
 
 <a id="shape"></a>
 
 **`shape`** · [`Section`](Section.md) \| [`CorrespondingProfile`](../geometry/CorrespondingProfile.md) · Required
 
+Profile coordinates are [radius, Z] in millimetres.
+
 
 
 <a id="options"></a>
 
-**`options`** · [`RevolveOptions`](../geometry/RevolveOptions.md) · Optional
+**`options`** · [`RevolveOptions`](RevolveOptions.md) · Optional
 
-- [`segments`](../geometry/RevolveOptions.md#segments) · `number` · Optional
+- [`segments`](RevolveOptions.md#segments) · `number` · Optional
 
   Exact circumferential segment count from three through the configured safety limit.
 
   This local topology override takes precedence over [CircularPrimitiveOptions.resolution](../geometry/CircularPrimitiveOptions.md#resolution)
   and any active model-wide resolution policy.
 
-- [`resolution`](../geometry/RevolveOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
+- [`resolution`](RevolveOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Operation-level physical tessellation policy over the active model-wide policy.
 
-- [`degrees`](../geometry/RevolveOptions.md#degrees) · `number` · Optional · Default: `360`
+- [`degrees`](RevolveOptions.md#degrees) · `number` · Optional · Default: `360`
 
   Positive sweep in degrees, no greater than 360. Defaults to a full revolution;
   smaller sweeps form partial revolutions with end caps.
@@ -48,7 +54,7 @@ revolve(profile!, { degrees: 270 });
   revolutions require at least three sweep intervals: adaptive sampling refines to that floor,
   while exact counts that imply fewer intervals reject. Pure mesh.revolve supports one interval.
 
-- [`limits`](../geometry/RevolveOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
+- [`limits`](RevolveOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and sampling allocation ceilings.
 
@@ -61,23 +67,23 @@ revolve(profile!, { degrees: 270 });
 
 ## Related APIs
 
-- [CorrespondingProfile](../geometry/CorrespondingProfile.md)
-- [RevolveOptions](../geometry/RevolveOptions.md)
+- [RevolveOptions](RevolveOptions.md)
 - [Section](Section.md)
 - [Solid](Solid.md)
 
 ## Guides
 
 - [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Chamfer a twisted extrusion](../../guides/profiles-and-extrusion.md#chamfer-a-twisted-extrusion)
 - [Revolve a radial profile](../../guides/profiles-and-extrusion.md#revolve-a-radial-profile)
 - [Rotation-minimizing path sweep](../../guides/sweeps-and-lofts.md#rotation-minimizing-path-sweep)
 - [Matched-section loft](../../guides/sweeps-and-lofts.md#matched-section-loft)
 - [Choose a modeling path](../../guides/recipes.md#choose-a-technique)
 
-## Supported imports
+## Import
 
 ```ts
 import { revolve } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/solidFromMesh.md

@@ -2,12 +2,14 @@
 
 Imports a bounded closed indexed mesh.
 
-**solidFromMesh**(`mesh`: [`TriangleMesh`](../geometry/TriangleMesh.md) \| [`ImmutableTriangleMesh`](../geometry/ImmutableTriangleMesh.md)): [`Solid`](Solid.md)
+**solidFromMesh**(`mesh`: [`TriangleMesh`](../mesh/TriangleMesh.md) \| [`ImmutableTriangleMesh`](../mesh/ImmutableTriangleMesh.md)): [`Solid`](Solid.md)
 
 
 
 ## Example: Mesh import
 
+
+
 ```ts
 import { solidFromMesh } from "@metamesh/modeling";
 import * as mesh from "@metamesh/modeling/geometry/mesh";
@@ -17,11 +19,15 @@ const plate = mesh.extrude(rectangleContour({ size: [20, 12] }), { height: 6 });
 solidFromMesh(plate);
 ```
 
+
+
 ## Parameters
 
 <a id="mesh"></a>
 
-**`mesh`** · [`TriangleMesh`](../geometry/TriangleMesh.md) \| [`ImmutableTriangleMesh`](../geometry/ImmutableTriangleMesh.md) · Required
+**`mesh`** · [`TriangleMesh`](../mesh/TriangleMesh.md) \| [`ImmutableTriangleMesh`](../mesh/ImmutableTriangleMesh.md) · Required
+
+Closed, oriented mesh in millimetres; ownership stays with the caller.
 
 
 
@@ -32,18 +38,16 @@ solidFromMesh(plate);
 
 ## Related APIs
 
-- [ImmutableTriangleMesh](../geometry/ImmutableTriangleMesh.md)
 - [Solid](Solid.md)
-- [TriangleMesh](../geometry/TriangleMesh.md)
 
 ## Guides
 
 - [Solid inspection](../../guides/resolution-and-inspection.md#solid-inspection)
 
-## Supported imports
+## Import
 
 ```ts
 import { solidFromMesh } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.