@metamesh/modeling 0.19.0 → 0.20.0

package/dist/docs/reference/model/ExtrudeOptions.md

@@ -0,0 +1,153 @@
+# ExtrudeOptions
+
+Native +Z extrusion with optional inward end treatments.
+
+## Extends
+
+- [`ExtrudeMeshOptions`](../mesh/ExtrudeMeshOptions.md)
+
+## Properties
+
+### slices?
+
+
+
+`readonly` `optional` **slices?**: `number`
+
+
+
+Positive longitudinal interval count; n slices create n + 1 profile layers. Overrides ordinary extrusion's physical sampling.
+
+#### Inherited from
+
+[`ExtrudeMeshOptions`](../mesh/ExtrudeMeshOptions.md).[`slices`](../mesh/ExtrudeMeshOptions.md#slices)
+
+***
+
+### limits?
+
+
+
+`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\>
+
+
+
+Explicit output and sampling allocation ceilings.
+
+#### Inherited from
+
+[`ExtrudeMeshOptions`](../mesh/ExtrudeMeshOptions.md).[`limits`](../mesh/ExtrudeMeshOptions.md#limits)
+
+***
+
+### resolution?
+
+
+
+`readonly` `optional` **resolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
+
+
+
+Operation-level physical policy over the nearest model scope.
+
+#### Inherited from
+
+[`ExtrudeMeshOptions`](../mesh/ExtrudeMeshOptions.md).[`resolution`](../mesh/ExtrudeMeshOptions.md#resolution)
+
+***
+
+### scale?
+
+
+
+`readonly` `optional` **scale?**: `number` \| [`Vector2Input`](../geometry/Vector2Input.md)
+
+
+
+Final profile-local uniform or XY scale, interpolated from one before twisting. Both components must be positive or both zero for an apex of one simple boundary. Defaults to one.
+
+#### Inherited from
+
+[`ExtrudeMeshOptions`](../mesh/ExtrudeMeshOptions.md).[`scale`](../mesh/ExtrudeMeshOptions.md#scale)
+
+***
+
+### twist?
+
+
+
+`readonly` `optional` **twist?**: `number`
+
+
+
+Finite rotation of the top profile about +Z, in degrees; defaults to zero.
+
+#### Inherited from
+
+[`ExtrudeMeshOptions`](../mesh/ExtrudeMeshOptions.md).[`twist`](../mesh/ExtrudeMeshOptions.md#twist)
+
+***
+
+### ends?
+
+
+
+`readonly` `optional` **ends?**: [`EndTreatments`](EndTreatments.md)
+
+
+
+Independent inward treatments on every material rim. Twisted extrusions admit chamfers with cap and normal-section wall setbacks; other treatments require zero twist. Enabled treatments require unit scale and preserve boundary topology. The base slices grid is retained, with additional treatment/refinement rings where necessary.
+
+***
+
+### height
+
+
+
+`readonly` **height**: `number`
+
+
+
+Positive extrusion height in millimetres.
+
+#### Inherited from
+
+[`ExtrudeMeshOptions`](../mesh/ExtrudeMeshOptions.md).[`height`](../mesh/ExtrudeMeshOptions.md#height)
+
+***
+
+### center?
+
+
+
+`readonly` `optional` **center?**: `boolean`
+
+
+
+Center the extrusion on Z; otherwise its bottom is at zero. Defaults to false.
+
+#### Inherited from
+
+[`ExtrudeMeshOptions`](../mesh/ExtrudeMeshOptions.md).[`center`](../mesh/ExtrudeMeshOptions.md#center)
+
+
+## Related APIs
+
+- [EndTreatments](EndTreatments.md)
+
+## Guides
+
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Chamfer a twisted extrusion](../../guides/profiles-and-extrusion.md#chamfer-a-twisted-extrusion)
+- [Revolve a radial profile](../../guides/profiles-and-extrusion.md#revolve-a-radial-profile)
+- [Rotation-minimizing path sweep](../../guides/sweeps-and-lofts.md#rotation-minimizing-path-sweep)
+- [Matched-section loft](../../guides/sweeps-and-lofts.md#matched-section-loft)
+- [Choose a modeling path](../../guides/recipes.md#choose-a-technique)
+
+## Import
+
+```ts
+import type { ExtrudeOptions } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/GenerateCallback.md

@@ -38,10 +38,10 @@ Pure synchronous callback returning one declared part or an array; caches are op
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-## Supported imports
+## Import
 
 ```ts
 import type { GenerateCallback } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/GenerateContext.md

@@ -1,6 +1,6 @@
 # GenerateContext
 
-The sole synchronous authoring context, supplied independently of Studio.
+Synchronous authoring context with immutable parameters and host-prepared services.
 
 ## Type Parameters
 
@@ -38,6 +38,30 @@ Host-prepared readonly synchronous capabilities, fixed for the session.
 
 ***
 
+### resolution
+
+
+
+`readonly` **resolution**: `Readonly`\<[`ResolvedGeometryResolution`](../geometry/ResolvedGeometryResolution.md)\>
+
+
+
+Effective immutable sampling defaults, fixed for this session; pass explicitly to pure geometry operations.
+
+***
+
+### limits
+
+
+
+`readonly` **limits**: `Readonly`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\>
+
+
+
+Effective immutable resource limits after host ceilings and session overrides are applied.
+
+***
+
 ### memo
 
 
@@ -199,10 +223,10 @@ Records a nonblocking issue; call only in the outer generation callback.
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-## Supported imports
+## Import
 
 ```ts
 import type { GenerateContext } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/GenerationDiagnostic.md

@@ -55,10 +55,10 @@ Relative field location within the parameter, or input map when parameterId is o
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-## Supported imports
+## Import
 
 ```ts
 import type { GenerationDiagnostic } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/GenerationError.md

@@ -55,10 +55,10 @@ Issues reached in normal JavaScript order, ending with the first failed assertio
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-## Supported imports
+## Import
 
 ```ts
 import { GenerationError } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → model}/HeightfieldOptions.md

@@ -2,7 +2,7 @@
 
 A closed rectilinear heightfield above a flat base, with uniform or explicit XY samples in millimetres.
 
-**HeightfieldOptions** = `object` & (\{ `size`: [`Vector2Input`](Vector2Input.md); `segments`: readonly \[`x`: `number`, `y`: `number`\]; `origin?`: [`Vector2Input`](Vector2Input.md); `coordinates?`: `never`; \} \| \{ `coordinates`: \{ `x`: readonly `number`[]; `y`: readonly `number`[]; \}; `size?`: `never`; `segments?`: `never`; `origin?`: `never`; \})
+**HeightfieldOptions** = `object` & (\{ `size`: [`Vector2Input`](../geometry/Vector2Input.md); `segments`: readonly \[`x`: `number`, `y`: `number`\]; `origin?`: [`Vector2Input`](../geometry/Vector2Input.md); `coordinates?`: `never`; \} \| \{ `coordinates`: \{ `x`: readonly `number`[]; `y`: readonly `number`[]; \}; `size?`: `never`; `segments?`: `never`; `origin?`: `never`; \})
 
 
 
@@ -18,7 +18,7 @@ absolute samples per axis, distinct in Float32. This infers the footprint and in
 
 
 
-`readonly` **height**: (`point`: [`Vector2Data`](Vector2Data.md)) => `number`
+`readonly` **height**: (`point`: [`Vector2Data`](../geometry/Vector2Data.md)) => `number`
 
 
 
@@ -28,7 +28,7 @@ Absolute top Z at the supplied XY point. Every sample must be above baseZ.
 
 <a id="point"></a>
 
-**`point`** · [`Vector2Data`](Vector2Data.md) · Required
+**`point`** · [`Vector2Data`](../geometry/Vector2Data.md) · Required
 
 
 
@@ -59,28 +59,10 @@ min-edge selects the shorter 3D diagonal; center-error selects the diagonal whos
 average is closest to one extra height sample at the physical cell centre. Ties use fixed.
 All policies retain two triangles per cell; neither estimates error elsewhere in the cell.
 
-
-## Related APIs
-
-- [Vector2Data](Vector2Data.md)
-- [Vector2Input](Vector2Input.md)
-
-## Guides
-
-- [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
-
-## Supported imports
+## Import
 
 ```ts
 import type { HeightfieldOptions } from "@metamesh/modeling";
 ```
 
-```ts
-import type { HeightfieldOptions } from "@metamesh/modeling/geometry";
-```
-
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/HoleCutterOpening.md

@@ -0,0 +1,27 @@
+# HoleCutterOpening
+
+A finished circular opening: outward edge treatment or screw seat, one per end. Treatment setbacks measure radial expansion first and axial depth second. A round radius is circular in that radial/axial section. Profile points run from [mouth expansion, 0] to [0, depth].
+
+**HoleCutterOpening** = [`EdgeTreatment`](../geometry/EdgeTreatment.md) \| [`HoleCutterRecess`](HoleCutterRecess.md)
+
+
+
+
+## Related APIs
+
+- [HoleCutterRecess](HoleCutterRecess.md)
+
+## Guides
+
+- [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
+- [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
+
+## Import
+
+```ts
+import type { HoleCutterOpening } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/HoleCutterOptions.md

@@ -1,8 +1,8 @@
 # HoleCutterOptions
 
-A deferred +Z hole or pocket cutter, with exactly one circular diameter or existing Section. Profile entry chamfers expand one strictly convex contour without holes by parallel-edge offsets; the supplied sampled boundary remains authoritative. Plain profile cutters accept any Section. Circular entry chamfers retain nominal circular/frustum radii under the selected radial sizing.
+A deferred +Z hole or pocket cutter, with exactly one circular diameter or existing Section. Openings widen nominal ends without changing the untreated bore. Both depths together must leave a positive untreated interval. Overrun extends the terminal mouth unchanged; omitted ends and overrun preserve blind-pocket floors. No support surface or printer fit is inferred.
 
-**HoleCutterOptions** = `object` & ([`CircularPrimitiveOptions`](../geometry/CircularPrimitiveOptions.md) & [`RadialSizingOptions`](../geometry/RadialSizingOptions.md) & `object` & (\{ `entryChamfer?`: `number`; `recess?`: `never`; \} \| \{ `recess`: [`HoleCutterRecess`](HoleCutterRecess.md); `entryChamfer?`: `never`; \}) \| \{ `profile`: [`Section`](Section.md); `diameter?`: `never`; `recess?`: `never`; `segments?`: `never`; `sizing?`: `never`; `entryChamfer?`: `number`; \})
+**HoleCutterOptions** = `object` & ([`CircularPrimitiveOptions`](../geometry/CircularPrimitiveOptions.md) & [`RadialSizingOptions`](../geometry/RadialSizingOptions.md) & `object` \| \{ `profile`: [`Section`](Section.md); `diameter?`: `never`; `segments?`: `never`; `sizing?`: `never`; `openings?`: \{ `bottom?`: [`EdgeTreatment`](../geometry/EdgeTreatment.md); `top?`: [`EdgeTreatment`](../geometry/EdgeTreatment.md); \}; \})
 
 
 
@@ -16,23 +16,13 @@ A deferred +Z hole or pocket cutter, with exactly one circular diameter or exist
 
 
 
-Positive nominal depth along +Z, starting exactly at Z=0.
-
-### face?
-
-
-
-`readonly` `optional` **face?**: `"bottom"` \| `"top"`
-
-
-
-Opening carrying the recess or entry chamfer; defaults to top.
+Positive nominal depth in millimetres along +Z, starting exactly at Z=0.
 
 ### overrun?
 
 
 
-`readonly` `optional` **overrun?**: [`HoleCutterOverrun`](HoleCutterOverrun.md)
+`readonly` `optional` **overrun?**: [`CutterOverrun`](CutterOverrun.md)
 
 
 
@@ -61,12 +51,8 @@ Local allocation ceilings may only lower the evaluating host's limits.
 
 ## Related APIs
 
-- [CircularPrimitiveOptions](../geometry/CircularPrimitiveOptions.md)
-- [GeometryResolution](../geometry/GeometryResolution.md)
-- [HoleCutterOverrun](HoleCutterOverrun.md)
-- [HoleCutterRecess](HoleCutterRecess.md)
-- [ModelingLimits](../geometry/ModelingLimits.md)
-- [RadialSizingOptions](../geometry/RadialSizingOptions.md)
+- [CutterOverrun](CutterOverrun.md)
+- [HoleCutterOpening](HoleCutterOpening.md)
 - [Section](Section.md)
 
 ## Guides
@@ -74,11 +60,12 @@ Local allocation ceilings may only lower the evaluating host's limits.
 - [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
 - [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
 
-## Supported imports
+## Import
 
 ```ts
 import type { HoleCutterOptions } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/HoleCutterRecess.md

@@ -40,7 +40,7 @@ Positive seat diameter greater than the bore, in millimetres.
 
 
 
-Positive seat depth no greater than height, in millimetres.
+Positive seat depth in millimetres; both openings must leave an untreated bore interval.
 
 ***
 
@@ -76,7 +76,7 @@ Positive mouth diameter greater than the bore, in millimetres.
 
 
 
-Full included angle strictly between zero and 180 degrees; derived depth must fit height.
+Full included angle strictly between zero and 180 degrees; derived depth must fit.
 
 
 ## Guides
@@ -84,11 +84,12 @@ Full included angle strictly between zero and 180 degrees; derived depth must fi
 - [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
 - [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
 
-## Supported imports
+## Import
 
 ```ts
 import type { HoleCutterRecess } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/HullOptions.md

@@ -62,7 +62,6 @@ Solid input excludes point input.
 ## Related APIs
 
 - [Solid](Solid.md)
-- [Vector3Input](../geometry/Vector3Input.md)
 
 ## Guides
 
@@ -70,10 +69,10 @@ Solid input excludes point input.
 - [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
 - [Join an independently modeled feature](../../guides/solid-joins.md#join-an-independently-modeled-feature)
 
-## Supported imports
+## Import
 
 ```ts
 import type { HullOptions } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/ImmutableValue.md

@@ -17,10 +17,10 @@ Deeply readonly view of captured generation data, including nested arrays and tu
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-## Supported imports
+## Import
 
 ```ts
 import type { ImmutableValue } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/ImplicitOptions.md

@@ -12,7 +12,7 @@ Positive-inside sampling, bounded to 4M native BCC grid slots and 8M field calls
 
 
 
-Positive-inside scalar field evaluated at finite XYZ points.
+Positive-inside scalar field evaluated at finite XYZ points in millimetres.
 
 #### Parameters
 
@@ -74,16 +74,10 @@ Field isosurface value; defaults to zero.
 
 Positive native geometric tolerance in millimetres; omitted uses interpolated grid crossings.
 
-
-## Related APIs
-
-- [Bounds3Data](../geometry/Bounds3Data.md)
-- [Vector3Data](../geometry/Vector3Data.md)
-
-## Supported imports
+## Import
 
 ```ts
 import type { ImplicitOptions } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/JoinOptions.md

@@ -56,10 +56,7 @@ Local allocation ceilings may only lower the evaluating host's limits.
 
 ## Related APIs
 
-- [Anchor3](../geometry/Anchor3-type.md)
-- [GeometryResolution](../geometry/GeometryResolution.md)
 - [JoinTransition](JoinTransition.md)
-- [ModelingLimits](../geometry/ModelingLimits.md)
 
 ## Guides
 
@@ -67,10 +64,10 @@ Local allocation ceilings may only lower the evaluating host's limits.
 - [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
 - [Join an independently modeled feature](../../guides/solid-joins.md#join-an-independently-modeled-feature)
 
-## Supported imports
+## Import
 
 ```ts
 import type { JoinOptions } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/JoinTransition.md

@@ -45,10 +45,10 @@ Nonnegative axial rise in millimetres above the local support contact.
 - [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
 - [Join an independently modeled feature](../../guides/solid-joins.md#join-an-independently-modeled-feature)
 
-## Supported imports
+## Import
 
 ```ts
 import type { JoinTransition } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/KnuckleHinge-type.md

@@ -41,13 +41,12 @@ Centered +X pin axis with +Z roll guide; opening and lift-off withdrawal are cal
 
 ## Related APIs
 
-- [Anchor3](../geometry/Anchor3-type.md)
 - [Solid](Solid.md)
 
-## Supported imports
+## Import
 
 ```ts
 import type { KnuckleHinge } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/KnuckleHingeHalfOptions.md

@@ -35,10 +35,10 @@ web reach and knuckle length must exceed `2 * Math.SQRT2 * chamfer` to retain th
 
 - [KnuckleHingeWeb](KnuckleHingeWeb.md)
 
-## Supported imports
+## Import
 
 ```ts
 import type { KnuckleHingeHalfOptions } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/KnuckleHingeOptions.md

@@ -2,7 +2,7 @@
 
 Joint declaration with independent attachments; unspecified sampling inherits the evaluating host.
 
-**KnuckleHingeOptions** = [`KnuckleHingeSpec`](../geometry/KnuckleHingeSpec.md) & [`KnuckleHingeSamplingOptions`](../geometry/KnuckleHingeSamplingOptions.md) & `object`
+**KnuckleHingeOptions** = [`KnuckleHingeSpec`](../mechanical/KnuckleHingeSpec.md) & [`KnuckleHingeSamplingOptions`](../mechanical/KnuckleHingeSamplingOptions.md) & `object`
 
 
 
@@ -32,13 +32,11 @@ Optional attachment and edge treatment for B, which always carries a running bor
 ## Related APIs
 
 - [KnuckleHingeHalfOptions](KnuckleHingeHalfOptions.md)
-- [KnuckleHingeSamplingOptions](../geometry/KnuckleHingeSamplingOptions.md)
-- [KnuckleHingeSpec](../geometry/KnuckleHingeSpec.md)
 
-## Supported imports
+## Import
 
 ```ts
 import type { KnuckleHingeOptions } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/KnuckleHingeWeb.md

@@ -50,10 +50,10 @@ Lower-face Z coordinate in the pin-centered frame, in millimetres. Must overlap
 
 Positive thickness along +Z. Each web spans its own barrel interval.
 
-## Supported imports
+## Import
 
 ```ts
 import type { KnuckleHingeWeb } from "@metamesh/modeling";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → model}/LoftCorrespondence.md

@@ -19,20 +19,17 @@ correspondence must remain authoritative.
 
 ## Guides
 
-- [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Chamfer a twisted extrusion](../../guides/profiles-and-extrusion.md#chamfer-a-twisted-extrusion)
+- [Revolve a radial profile](../../guides/profiles-and-extrusion.md#revolve-a-radial-profile)
+- [Rotation-minimizing path sweep](../../guides/sweeps-and-lofts.md#rotation-minimizing-path-sweep)
+- [Matched-section loft](../../guides/sweeps-and-lofts.md#matched-section-loft)
+- [Choose a modeling path](../../guides/recipes.md#choose-a-technique)
 
-## Supported imports
+## Import
 
 ```ts
 import type { LoftCorrespondence } from "@metamesh/modeling";
 ```
 
-```ts
-import type { LoftCorrespondence } from "@metamesh/modeling/geometry";
-```
-
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.