@metamesh/modeling 0.19.0 → 0.20.0

package/dist/docs/reference/mesh/loft.md

@@ -1,8 +1,8 @@
 # loft
 
-Lofts simple point loops at z heights or explicit right-handed frames, in input order.
+Lofts simple point contours at z heights or explicit affine transforms, in input order.
 
-**loft**(`stations`: readonly [`LoftMeshStation`](../geometry/LoftMeshStation.md)[], `options?`: [`LoftOptions`](../geometry/LoftOptions.md)): [`TriangleMesh`](../geometry/TriangleMesh.md)
+**loft**(`stations`: readonly [`LoftMeshStation`](LoftMeshStation.md)[], `options?`: [`LoftOptions`](../model/LoftOptions.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -14,7 +14,7 @@ const top = rectangleContour({ size: [30, 20], treatment: { kind: "round", radiu
 mesh.loft([{ profile: bottom, z: 0 }, { profile: top, z: 30 }], { correspondence: "reindex" });
 ```
 
-Correspondence defaults to direct. CCW-normalized loops retain their
+Correspondence defaults to direct. CCW-normalized contours retain their
 seam and original vertices; unequal counts gain subdivisions or repeated fan slots.
 Both ends use ear-clipped caps, supporting concave profiles without center fans.
 Intermediate slices interpolate placed world vertices, never frame axes.
@@ -25,35 +25,37 @@ Path2 profiles must be closed; raw point collections are interpreted as closed.
 
 <a id="stations"></a>
 
-**`stations`** · readonly [`LoftMeshStation`](../geometry/LoftMeshStation.md)[] · Required
+**`stations`** · readonly [`LoftMeshStation`](LoftMeshStation.md)[] · Required
+
+At least two XY profiles in connection order, each with Z height or affine placement.
 
 
 
 <a id="options"></a>
 
-**`options`** · [`LoftOptions`](../geometry/LoftOptions.md) · Optional
+**`options`** · [`LoftOptions`](../model/LoftOptions.md) · Optional
 
-- [`correspondence`](../geometry/LoftOptions.md#correspondence) · [`LoftCorrespondence`](../geometry/LoftCorrespondence.md) \| readonly [`LoftCorrespondence`](../geometry/LoftCorrespondence.md)[] · Optional
+- [`correspondence`](../model/LoftOptions.md#correspondence) · [`LoftCorrespondence`](../model/LoftCorrespondence.md) \| readonly [`LoftCorrespondence`](../model/LoftCorrespondence.md)[] · Optional
 
   One method or one per consecutive station gap. Omitted preserves known primitive landmarks, including circle/ellipse-to-rectangle corners, and otherwise uses direct correspondence with the supplied seams.
 
-- [`distribution`](../geometry/LoftOptions.md#distribution) · `"perimeter"` \| `"segments"` · Optional
+- [`distribution`](../model/LoftOptions.md#distribution) · `"perimeter"` \| `"segments"` · Optional
 
   Extra points follow edge length or distribute equally across existing segments. Defaults to perimeter for direct/reindex, or segments when any distance method is selected; distance methods require segments.
 
-- [`refine`](../geometry/LoftOptions.md#refine) · `number` \| readonly `number`[] · Optional
+- [`refine`](../model/LoftOptions.md#refine) · `number` \| readonly `number`[] · Optional
 
   Positive integer point-density multiplier, uniformly or per input profile. Original vertices are retained. Defaults to one.
 
-- [`slices`](../geometry/LoftOptions.md#slices) · `number` \| readonly `number`[] · Optional
+- [`slices`](../model/LoftOptions.md#slices) · `number` \| readonly `number`[] · Optional
 
-  Nonnegative count of world-linearly interpolated profiles, uniformly or per gap. Defaults to zero.
+  Positive longitudinal interval count, uniformly or per supplied station gap. Each gap with n slices has n - 1 inserted profiles. Defaults to one; placed world vertices interpolate linearly.
 
-- [`resolution`](../geometry/LoftOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
+- [`resolution`](../model/LoftOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Physical curve policy for retained primitives, and maximum edge length for point data. Exact primitive curve counts take precedence.
 
-- [`limits`](../geometry/LoftOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
+- [`limits`](../model/LoftOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and sampling budgets; native operations may only lower host ceilings.
 
@@ -61,23 +63,22 @@ Path2 profiles must be closed; raw point collections are interpreted as closed.
 
 ## Returns
 
-[`TriangleMesh`](../geometry/TriangleMesh.md)
+[`TriangleMesh`](TriangleMesh.md)
 
 
 ## Related APIs
 
-- [LoftMeshStation](../geometry/LoftMeshStation.md)
-- [LoftOptions](../geometry/LoftOptions.md)
-- [TriangleMesh](../geometry/TriangleMesh.md)
+- [LoftMeshStation](LoftMeshStation.md)
+- [TriangleMesh](TriangleMesh.md)
 
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
 import * as mesh from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/optimizePlanarPatches.md

@@ -2,7 +2,7 @@
 
 Improves pathological planar triangulation with bounded legal diagonal flips.
 
-**optimizePlanarPatches**(`mesh`: [`TriangleMeshInput`](../geometry/TriangleMeshInput.md), `options?`: [`PlanarMeshOptimizationOptions`](../geometry/PlanarMeshOptimizationOptions.md)): [`PlanarMeshOptimizationResult`](../geometry/PlanarMeshOptimizationResult.md)
+**optimizePlanarPatches**(`mesh`: [`TriangleMeshInput`](TriangleMeshInput.md), `options?`: [`PlanarMeshOptimizationOptions`](PlanarMeshOptimizationOptions.md)): [`PlanarMeshOptimizationResult`](PlanarMeshOptimizationResult.md)
 
 
 
@@ -17,60 +17,60 @@ results. Malformed buffers and the configured analysis complexity limit throw.
 
 <a id="mesh"></a>
 
-**`mesh`** · [`TriangleMeshInput`](../geometry/TriangleMeshInput.md) · Required
+**`mesh`** · [`TriangleMeshInput`](TriangleMeshInput.md) · Required
 
-Closed, consistently wound indexed triangle mesh in arbitrary consistent units.
+Closed, consistently wound mesh in consistent units.
 
 
 
 <a id="options"></a>
 
-**`options`** · [`PlanarMeshOptimizationOptions`](../geometry/PlanarMeshOptimizationOptions.md) · Optional
+**`options`** · [`PlanarMeshOptimizationOptions`](PlanarMeshOptimizationOptions.md) · Optional
 
 Patch eligibility, numeric tolerance, and deterministic work bounds.
 
-- [`maxFlipAttempts`](../geometry/PlanarMeshOptimizationOptions.md#maxflipattempts) · `number` · Optional
+- [`maxFlipAttempts`](PlanarMeshOptimizationOptions.md#maxflipattempts) · `number` · Optional
 
   Maximum attempted edge evaluations. By default this is twenty times the initial candidate
   edge count, capped at `1000000`.
 
-- [`maxEdgeRevisits`](../geometry/PlanarMeshOptimizationOptions.md#maxedgerevisits) · `number` · Optional
+- [`maxEdgeRevisits`](PlanarMeshOptimizationOptions.md#maxedgerevisits) · `number` · Optional
 
   Maximum times one edge may be reconsidered after neighbouring flips. Defaults to `12`.
 
-- [`maxPatchTriangles`](../geometry/PlanarMeshOptimizationOptions.md#maxpatchtriangles) · `number` · Optional
+- [`maxPatchTriangles`](PlanarMeshOptimizationOptions.md#maxpatchtriangles) · `number` · Optional
 
   Maximum triangles allowed in one selected patch. Defaults to `50000`.
 
-- [`maxProcessedTriangles`](../geometry/PlanarMeshOptimizationOptions.md#maxprocessedtriangles) · `number` · Optional
+- [`maxProcessedTriangles`](PlanarMeshOptimizationOptions.md#maxprocessedtriangles) · `number` · Optional
 
   Maximum cumulative triangles across selected patches. Defaults to `200000`.
 
-- [`minPatchTriangles`](../geometry/PlanarMeshOptimizationOptions.md#minpatchtriangles) · `number` · Optional
+- [`minPatchTriangles`](PlanarMeshOptimizationOptions.md#minpatchtriangles) · `number` · Optional
 
   Minimum triangles required before a planar patch is eligible. Defaults to `8`.
 
-- [`triggerMaxAspectRatio`](../geometry/PlanarMeshOptimizationOptions.md#triggermaxaspectratio) · `number` · Optional
+- [`triggerMaxAspectRatio`](PlanarMeshOptimizationOptions.md#triggermaxaspectratio) · `number` · Optional
 
   Select patches whose worst normalized aspect ratio exceeds this value. Defaults to `12`.
 
-- [`triggerMaxFanRatio`](../geometry/PlanarMeshOptimizationOptions.md#triggermaxfanratio) · `number` · Optional
+- [`triggerMaxFanRatio`](PlanarMeshOptimizationOptions.md#triggermaxfanratio) · `number` · Optional
 
   Select patches whose largest per-vertex triangle share exceeds this ratio. Defaults to `0.2`.
 
-- [`triggerMaxVertexTriangleIncidence`](../geometry/PlanarMeshOptimizationOptions.md#triggermaxvertextriangleincidence) · `number` · Optional
+- [`triggerMaxVertexTriangleIncidence`](PlanarMeshOptimizationOptions.md#triggermaxvertextriangleincidence) · `number` · Optional
 
   Select patches whose largest vertex triangle incidence exceeds this value. Defaults to `16`.
 
-- [`triggerMinAngleDegrees`](../geometry/PlanarMeshOptimizationOptions.md#triggerminangledegrees) · `number` · Optional
+- [`triggerMinAngleDegrees`](PlanarMeshOptimizationOptions.md#triggerminangledegrees) · `number` · Optional
 
   Select patches whose smallest interior angle is below this many degrees. Defaults to `8`.
 
-- [`maxTriangles`](../geometry/PlanarMeshOptimizationOptions.md#maxtriangles) · `number` · Optional
+- [`maxTriangles`](PlanarMeshOptimizationOptions.md#maxtriangles) · `number` · Optional
 
   Maximum number of triangles inspected. Defaults to `200000`.
 
-- [`tolerance`](../geometry/PlanarMeshOptimizationOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
+- [`tolerance`](PlanarMeshOptimizationOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Numeric comparison overrides; model coordinates are interpreted in their existing units.
 
@@ -78,25 +78,25 @@ Patch eligibility, numeric tolerance, and deterministic work bounds.
 
 ## Returns
 
-[`PlanarMeshOptimizationResult`](../geometry/PlanarMeshOptimizationResult.md)
+[`PlanarMeshOptimizationResult`](PlanarMeshOptimizationResult.md)
 
 Optimized connectivity and before/after diagnostics, or an unchanged safe fallback.
 
 
 ## Related APIs
 
-- [PlanarMeshOptimizationOptions](../geometry/PlanarMeshOptimizationOptions.md)
-- [PlanarMeshOptimizationResult](../geometry/PlanarMeshOptimizationResult.md)
-- [TriangleMeshInput](../geometry/TriangleMeshInput.md)
+- [PlanarMeshOptimizationOptions](PlanarMeshOptimizationOptions.md)
+- [PlanarMeshOptimizationResult](PlanarMeshOptimizationResult.md)
+- [TriangleMeshInput](TriangleMeshInput.md)
 
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
 import * as mesh from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/preflightHeightfield.md

@@ -2,7 +2,7 @@
 
 Checks grid options, Float32 axis precision, and output limits; returns exact mesh buffer counts.
 
-**preflightHeightfield**(`options`: [`HeightfieldOptions`](../geometry/HeightfieldOptions.md), `limits?`: `Partial`\<`Pick`\<[`ModelingLimits`](../geometry/ModelingLimits.md), `"maxVertices"` \| `"maxTriangles"` \| `"maxBytes"`\>\>): [`HeightfieldPreflight`](../geometry/HeightfieldPreflight.md)
+**preflightHeightfield**(`options`: [`HeightfieldOptions`](../model/HeightfieldOptions.md), `limits?`: `Partial`\<`Pick`\<[`ModelingLimits`](../geometry/ModelingLimits.md), `"maxVertices"` \| `"maxTriangles"` \| `"maxBytes"`\>\>): [`HeightfieldPreflight`](HeightfieldPreflight.md)
 
 
 
@@ -14,7 +14,9 @@ construction. `byteCount` covers position and index buffers, not total working m
 
 <a id="options"></a>
 
-**`options`** · [`HeightfieldOptions`](../geometry/HeightfieldOptions.md) · Required
+**`options`** · [`HeightfieldOptions`](../model/HeightfieldOptions.md) · Required
+
+Grid in millimetres; the height callback is not evaluated.
 
 
 
@@ -26,23 +28,21 @@ construction. `byteCount` covers position and index buffers, not total working m
 
 ## Returns
 
-[`HeightfieldPreflight`](../geometry/HeightfieldPreflight.md)
+[`HeightfieldPreflight`](HeightfieldPreflight.md)
 
 
 ## Related APIs
 
-- [HeightfieldOptions](../geometry/HeightfieldOptions.md)
-- [HeightfieldPreflight](../geometry/HeightfieldPreflight.md)
-- [ModelingLimits](../geometry/ModelingLimits.md)
+- [HeightfieldPreflight](HeightfieldPreflight.md)
 
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
 import * as mesh from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/preflightThreadSolid.md

@@ -2,7 +2,7 @@
 
 Checks thread dimensions, profile, end treatments, sampling, and conservative estimates against output limits.
 
-**preflightThreadSolid**(`options`: [`ThreadSolidOptions`](../geometry/ThreadSolidOptions.md)): [`ThreadSolidPreflight`](../geometry/ThreadSolidPreflight.md)
+**preflightThreadSolid**(`options`: [`ThreadSolidOptions`](../mechanical/ThreadSolidOptions.md)): [`ThreadSolidPreflight`](../mechanical/ThreadSolidPreflight.md)
 
 
 
@@ -16,58 +16,60 @@ See `mesh.threadSolid` for standalone mesh construction.
 
 <a id="options"></a>
 
-**`options`** · [`ThreadSolidOptions`](../geometry/ThreadSolidOptions.md) · Required
+**`options`** · [`ThreadSolidOptions`](../mechanical/ThreadSolidOptions.md) · Required
 
-- [`length`](../geometry/ThreadSolidOptions.md#length) · `number` · Required
+Dimensions in millimetres and a validated profile; apply any fit compensation first.
+
+- [`length`](../mechanical/ThreadSolidOptions.md#length) · `number` · Required
 
   Total threaded axial length in millimetres.
 
-- [`majorDiameter`](../geometry/ThreadSolidOptions.md#majordiameter) · `number` · Required
+- [`majorDiameter`](../mechanical/ThreadSolidOptions.md#majordiameter) · `number` · Required
 
-  Nominal major diameter before any caller-owned fit compensation.
+  Major diameter in millimetres; apply any caller-owned fit compensation before construction.
 
-- [`profile`](../geometry/ThreadSolidOptions.md#profile) · [`ThreadProfile`](../geometry/ThreadProfile-type.md) · Required
+- [`profile`](../mechanical/ThreadSolidOptions.md#profile) · [`ThreadProfile`](../mechanical/ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
-- [`ends`](../geometry/ThreadSolidOptions.md#ends) · [`ThreadEndTreatmentOptions`](../geometry/ThreadEndTreatmentOptions.md) · Optional
+- [`ends`](../mechanical/ThreadSolidOptions.md#ends) · [`ThreadEndTreatmentOptions`](../mechanical/ThreadEndTreatmentOptions.md) · Optional
 
   Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
   BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
-- [`handedness`](../geometry/ThreadSolidOptions.md#handedness) · [`ThreadHandedness`](../geometry/ThreadHandedness.md) · Optional
+- [`handedness`](../mechanical/ThreadSolidOptions.md#handedness) · [`ThreadHandedness`](../mechanical/ThreadHandedness.md) · Optional
 
   Helix direction. Default: `right`.
 
-- [`limits`](../geometry/ThreadSolidOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
+- [`limits`](../mechanical/ThreadSolidOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and circular allocation ceilings.
 
-- [`phase`](../geometry/ThreadSolidOptions.md#phase) · `number` · Optional
+- [`phase`](../mechanical/ThreadSolidOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
-- [`resolution`](../geometry/ThreadSolidOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
+- [`resolution`](../mechanical/ThreadSolidOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional circular-resolution policy.
 
-- [`starts`](../geometry/ThreadSolidOptions.md#starts) · `number` · Optional
+- [`starts`](../mechanical/ThreadSolidOptions.md#starts) · `number` · Optional
 
   Number of evenly phased starts. Default: `1`.
 
-- [`tolerance`](../geometry/ThreadSolidOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
+- [`tolerance`](../mechanical/ThreadSolidOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
-- [`bevel`](../geometry/ThreadSolidOptions.md#bevel) · [`Bevel`](../geometry/Bevel.md) · Optional
+- [`bevel`](../mechanical/ThreadSolidOptions.md#bevel) · [`Bevel`](../mechanical/Bevel.md) · Optional
 
   Independent 45-degree bottom/top bevels; omitted disables both. Auto uses profile depth.
 
-- [`bevelOffset`](../geometry/ThreadSolidOptions.md#beveloffset) · `number` · Optional
+- [`bevelOffset`](../mechanical/ThreadSolidOptions.md#beveloffset) · `number` · Optional
 
-  Distance of each bevel target face inward from the corresponding mesh end.
+  Distance in millimetres of each bevel target face inward from the corresponding mesh end.
 
-- [`bevelMode`](../geometry/ThreadSolidOptions.md#bevelmode) · `"inset"` \| `"outset"` · Optional
+- [`bevelMode`](../mechanical/ThreadSolidOptions.md#bevelmode) · `"inset"` \| `"outset"` · Optional
 
   `inset` trims an external rod; `outset` expands an internal cutter.
 
@@ -75,22 +77,17 @@ See `mesh.threadSolid` for standalone mesh construction.
 
 ## Returns
 
-[`ThreadSolidPreflight`](../geometry/ThreadSolidPreflight.md)
-
-
-## Related APIs
+[`ThreadSolidPreflight`](../mechanical/ThreadSolidPreflight.md)
 
-- [ThreadSolidOptions](../geometry/ThreadSolidOptions.md)
-- [ThreadSolidPreflight](../geometry/ThreadSolidPreflight.md)
 
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
 import * as mesh from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/render.md

@@ -2,7 +2,7 @@
 
 Builds crease-aware render buffers without moving or merging distinct positions. Face normals are averaged only at exactly coincident positions within the crease angle. Returns owned buffers; every triangle retains its coordinates, order and winding. Pathological vertex fans exceeding 50 million normal comparisons reject with a complexity error.
 
-**render**(`input`: [`TriangleMeshInput`](../geometry/TriangleMeshInput.md), `options?`: [`MeshRenderOptions`](MeshRenderOptions.md)): [`RenderMesh`](RenderMesh.md)
+**render**(`input`: [`TriangleMeshInput`](TriangleMeshInput.md), `options?`: [`MeshRenderOptions`](MeshRenderOptions.md)): [`RenderMesh`](RenderMesh.md)
 
 
 
@@ -19,7 +19,9 @@ const rendered = mesh.render(surface);
 
 <a id="input"></a>
 
-**`input`** · [`TriangleMeshInput`](../geometry/TriangleMeshInput.md) · Required
+**`input`** · [`TriangleMeshInput`](TriangleMeshInput.md) · Required
+
+Indexed mesh to copy; source buffers remain unchanged.
 
 
 
@@ -42,16 +44,16 @@ const rendered = mesh.render(surface);
 
 - [MeshRenderOptions](MeshRenderOptions.md)
 - [RenderMesh](RenderMesh.md)
-- [TriangleMeshInput](../geometry/TriangleMeshInput.md)
+- [TriangleMeshInput](TriangleMeshInput.md)
 
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
 import * as mesh from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/reverse.md

@@ -2,7 +2,7 @@
 
 Returns a copy of a mesh with every triangle winding reversed.
 
-**reverse**(`mesh`: [`TriangleMeshInput`](../geometry/TriangleMeshInput.md)): [`TriangleMesh`](../geometry/TriangleMesh.md)
+**reverse**(`mesh`: [`TriangleMeshInput`](TriangleMeshInput.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -10,7 +10,7 @@ Returns a copy of a mesh with every triangle winding reversed.
 
 <a id="mesh"></a>
 
-**`mesh`** · [`TriangleMeshInput`](../geometry/TriangleMeshInput.md) · Required
+**`mesh`** · [`TriangleMeshInput`](TriangleMeshInput.md) · Required
 
 Mesh to copy and reverse.
 
@@ -18,24 +18,24 @@ Mesh to copy and reverse.
 
 ## Returns
 
-[`TriangleMesh`](../geometry/TriangleMesh.md)
+[`TriangleMesh`](TriangleMesh.md)
 
 Fresh position and index buffers; the input remains unchanged.
 
 
 ## Related APIs
 
-- [TriangleMesh](../geometry/TriangleMesh.md)
-- [TriangleMeshInput](../geometry/TriangleMeshInput.md)
+- [TriangleMesh](TriangleMesh.md)
+- [TriangleMeshInput](TriangleMeshInput.md)
 
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
 import * as mesh from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/revolve.md

@@ -2,7 +2,7 @@
 
 Revolves a non-duplicated closed `[radius, z]` profile around +Z.
 
-`const` **revolve**: (`input`: [`Path2Input`](../geometry/Path2Input.md), `options?`: [`RevolveOptions`](../geometry/RevolveOptions.md)) => [`TriangleMesh`](../geometry/TriangleMesh.md)
+`const` **revolve**: (`input`: [`Path2Input`](../geometry/Path2Input.md), `options?`: [`RevolveOptions`](../model/RevolveOptions.md)) => [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -27,26 +27,26 @@ mesh.revolve([[0, 0], [12, 0], [8, 20], [0, 20]], { degrees: 270 });
 
 **`input`** · [`Path2Input`](../geometry/Path2Input.md) · Required
 
+Closed `[radius, Z]` profile in millimetres; radii must be non-negative.
 
 
-<a id="options"></a>
 
-**`options`** · [`RevolveOptions`](../geometry/RevolveOptions.md) · Optional
+<a id="options"></a>
 
-Optional physical or exact circumferential sampling controls. Defaults to `{}`.
+**`options`** · [`RevolveOptions`](../model/RevolveOptions.md) · Optional
 
-- [`segments`](../geometry/RevolveOptions.md#segments) · `number` · Optional
+- [`segments`](../model/RevolveOptions.md#segments) · `number` · Optional
 
   Exact circumferential segment count from three through the configured safety limit.
 
   This local topology override takes precedence over [CircularPrimitiveOptions.resolution](../geometry/CircularPrimitiveOptions.md#resolution)
   and any active model-wide resolution policy.
 
-- [`resolution`](../geometry/RevolveOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
+- [`resolution`](../model/RevolveOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Operation-level physical tessellation policy over the active model-wide policy.
 
-- [`degrees`](../geometry/RevolveOptions.md#degrees) · `number` · Optional · Default: `360`
+- [`degrees`](../model/RevolveOptions.md#degrees) · `number` · Optional · Default: `360`
 
   Positive sweep in degrees, no greater than 360. Defaults to a full revolution;
   smaller sweeps form partial revolutions with end caps.
@@ -54,7 +54,7 @@ Optional physical or exact circumferential sampling controls. Defaults to `{}`.
   revolutions require at least three sweep intervals: adaptive sampling refines to that floor,
   while exact counts that imply fewer intervals reject. Pure mesh.revolve supports one interval.
 
-- [`limits`](../geometry/RevolveOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
+- [`limits`](../model/RevolveOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and sampling allocation ceilings.
 
@@ -62,25 +62,23 @@ Optional physical or exact circumferential sampling controls. Defaults to `{}`.
 
 ## Returns
 
-[`TriangleMesh`](../geometry/TriangleMesh.md)
+[`TriangleMesh`](TriangleMesh.md)
 
 A closed indexed triangle mesh revolved counter-clockwise around +Z.
 
 
 ## Related APIs
 
-- [Path2Input](../geometry/Path2Input.md)
-- [RevolveOptions](../geometry/RevolveOptions.md)
-- [TriangleMesh](../geometry/TriangleMesh.md)
+- [TriangleMesh](TriangleMesh.md)
 
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
 import * as mesh from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/signature.md

@@ -2,7 +2,7 @@
 
 Creates an order-independent regression signature for a manufacturing mesh.
 
-**signature**(`mesh`: [`TriangleMeshInput`](../geometry/TriangleMeshInput.md), `options?`: [`TriangleMeshSignatureOptions`](../geometry/TriangleMeshSignatureOptions.md)): [`TriangleMeshSignature`](../geometry/TriangleMeshSignature.md)
+**signature**(`mesh`: [`TriangleMeshInput`](TriangleMeshInput.md), `options?`: [`TriangleMeshSignatureOptions`](TriangleMeshSignatureOptions.md)): [`TriangleMeshSignature`](TriangleMeshSignature.md)
 
 
 
@@ -14,7 +14,7 @@ connectivity metrics do. The fingerprint is a regression aid, not a cryptographi
 
 <a id="mesh"></a>
 
-**`mesh`** · [`TriangleMeshInput`](../geometry/TriangleMeshInput.md) · Required
+**`mesh`** · [`TriangleMeshInput`](TriangleMeshInput.md) · Required
 
 Closed oriented mesh to measure without mutation.
 
@@ -22,19 +22,19 @@ Closed oriented mesh to measure without mutation.
 
 <a id="options"></a>
 
-**`options`** · [`TriangleMeshSignatureOptions`](../geometry/TriangleMeshSignatureOptions.md) · Optional
+**`options`** · [`TriangleMeshSignatureOptions`](TriangleMeshSignatureOptions.md) · Optional
 
 Absolute quantization and complexity limits.
 
-- [`maxTriangles`](../geometry/TriangleMeshSignatureOptions.md#maxtriangles) · `number` · Optional
+- [`maxTriangles`](TriangleMeshSignatureOptions.md#maxtriangles) · `number` · Optional
 
   Maximum accepted triangle count. Defaults to 200,000.
 
-- [`positionTolerance`](../geometry/TriangleMeshSignatureOptions.md#positiontolerance) · `number` · Optional
+- [`positionTolerance`](TriangleMeshSignatureOptions.md#positiontolerance) · `number` · Optional
 
   Position and bounds quantization in model units. Defaults to `1e-5`.
 
-- [`volumeTolerance`](../geometry/TriangleMeshSignatureOptions.md#volumetolerance) · `number` · Optional
+- [`volumeTolerance`](TriangleMeshSignatureOptions.md#volumetolerance) · `number` · Optional
 
   Signed-volume quantization in cubic model units. Defaults to `1e-4`.
 
@@ -42,7 +42,7 @@ Absolute quantization and complexity limits.
 
 ## Returns
 
-[`TriangleMeshSignature`](../geometry/TriangleMeshSignature.md)
+[`TriangleMeshSignature`](TriangleMeshSignature.md)
 
 Compact counts, bounds, volume, topology, tolerances, and canonical fingerprint.
 
@@ -53,18 +53,18 @@ Compact counts, bounds, volume, topology, tolerances, and canonical fingerprint.
 
 ## Related APIs
 
-- [TriangleMeshInput](../geometry/TriangleMeshInput.md)
-- [TriangleMeshSignature](../geometry/TriangleMeshSignature.md)
-- [TriangleMeshSignatureOptions](../geometry/TriangleMeshSignatureOptions.md)
+- [TriangleMeshInput](TriangleMeshInput.md)
+- [TriangleMeshSignature](TriangleMeshSignature.md)
+- [TriangleMeshSignatureOptions](TriangleMeshSignatureOptions.md)
 
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
 import * as mesh from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.