@metamesh/modeling 0.19.0 → 0.20.0

package/dist/docs/reference/{geometry → mechanical}/BevelSize.md

@@ -11,18 +11,10 @@ Nonnegative 45-degree axial/radial bevel size in millimetres, or factory automat
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { BevelSize } from "@metamesh/modeling";
+import type { BevelSize } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { BevelSize } from "@metamesh/modeling/geometry";
-```
-
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/ButtressPressureFlankSide.md

@@ -11,18 +11,10 @@ Axial side carrying the near-normal pressure flank of a buttress thread.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { ButtressPressureFlankSide } from "@metamesh/modeling";
+import type { ButtressPressureFlankSide } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { ButtressPressureFlankSide } from "@metamesh/modeling/geometry";
-```
-
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/ButtressThreadProfileSpec.md

@@ -73,7 +73,7 @@ Adjacent axial thread spacing in millimetres.
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md)
 
 
 
@@ -87,25 +87,16 @@ Optional numerical tolerance overrides.
 ## Related APIs
 
 - [ButtressPressureFlankSide](ButtressPressureFlankSide.md)
-- [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { ButtressThreadProfileSpec } from "@metamesh/modeling";
+import type { ButtressThreadProfileSpec } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { ButtressThreadProfileSpec } from "@metamesh/modeling/geometry";
-```
-
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/ClearanceHoleDimensions.md

@@ -43,10 +43,10 @@ Normal-fit clearance-hole diameter.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { ClearanceHoleDimensions } from "@metamesh/modeling/geometry";
+import type { ClearanceHoleDimensions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/ClearanceHoleFit.md

@@ -11,10 +11,10 @@ Common clearance-hole fit categories, ordered from smallest to largest.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { ClearanceHoleFit } from "@metamesh/modeling/geometry";
+import type { ClearanceHoleFit } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CompensatedThreadDiameters.md

@@ -55,10 +55,10 @@ Signed radial shift: negative for male inset, positive for female outset.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CompensatedThreadDiameters } from "@metamesh/modeling/geometry";
+import type { CompensatedThreadDiameters } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CustomThreadProfileSpec.md

@@ -24,7 +24,7 @@ Selects a caller-defined periodic profile.
 
 
 
-`readonly` **points**: readonly [`Vector2Data`](Vector2Data.md)[]
+`readonly` **points**: readonly [`Vector2Data`](../geometry/Vector2Data.md)[]
 
 
 
@@ -53,7 +53,7 @@ Adjacent axial thread spacing in millimetres.
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md)
 
 
 
@@ -66,26 +66,16 @@ Optional numerical tolerance overrides.
 
 ## Related APIs
 
-- [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
-- [Vector2Data](Vector2Data.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CustomThreadProfileSpec } from "@metamesh/modeling";
+import type { CustomThreadProfileSpec } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { CustomThreadProfileSpec } from "@metamesh/modeling/geometry";
-```
-
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CylindricalGearDimensions.md

@@ -211,10 +211,10 @@ Helical equivalent spur tooth count, `toothCount / cos³(helixAngle)`.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CylindricalGearDimensions } from "@metamesh/modeling/geometry";
+import type { CylindricalGearDimensions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CylindricalGearMeshKind.md

@@ -11,10 +11,10 @@ Whether two cylindrical gears mesh on their outside teeth or as a pinion inside
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CylindricalGearMeshKind } from "@metamesh/modeling/geometry";
+import type { CylindricalGearMeshKind } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CylindricalGearOutlineOptions.md

@@ -32,7 +32,7 @@ Exact samples along each bottom land, at least one, within selected circular/pro
 
 
 
-`readonly` `optional` **limits?**: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>
+`readonly` `optional` **limits?**: `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\>
 
 
 
@@ -44,7 +44,7 @@ Explicit profile and circular allocation ceilings.
 
 
 
-`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
+`readonly` `optional` **resolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
 
 
 
@@ -63,19 +63,14 @@ Explicit physical sampling policy for adaptive defaults.
 Exact samples along each tooth tip, at least one, within selected circular/profile ceilings.
 
 
-## Related APIs
-
-- [GeometryResolution](GeometryResolution.md)
-- [GeometrySamplingLimits](GeometrySamplingLimits.md)
-
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CylindricalGearOutlineOptions } from "@metamesh/modeling/geometry";
+import type { CylindricalGearOutlineOptions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CylindricalGearPairDimensions.md

@@ -83,10 +83,10 @@ Helix angle required on the driven member for conjugate teeth, in degrees.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CylindricalGearPairDimensions } from "@metamesh/modeling/geometry";
+import type { CylindricalGearPairDimensions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CylindricalGearPairMotionOptions.md

@@ -35,10 +35,10 @@ Coupled poses sampled over one driver tooth pitch. Defaults to 24.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CylindricalGearPairMotionOptions } from "@metamesh/modeling/geometry";
+import type { CylindricalGearPairMotionOptions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CylindricalGearPairMotionReport.md

@@ -43,10 +43,10 @@ Number of evenly spaced coupled poses inspected.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CylindricalGearPairMotionReport } from "@metamesh/modeling/geometry";
+import type { CylindricalGearPairMotionReport } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CylindricalGearPairSpec.md

@@ -48,10 +48,10 @@ External/external or external/internal mesh.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CylindricalGearPairSpec } from "@metamesh/modeling/geometry";
+import type { CylindricalGearPairSpec } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/CylindricalGearSpec.md

@@ -84,10 +84,10 @@ Integer tooth count from 6 through 1,000; external profiles also enforce the no-
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { CylindricalGearSpec } from "@metamesh/modeling/geometry";
+import type { CylindricalGearSpec } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/InternalThreadCutterOptions.md

@@ -103,7 +103,7 @@ Total threaded axial length in millimetres.
 
 
 
-`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](ModelingLimits.md)\>
+`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\>
 
 
 
@@ -151,7 +151,7 @@ Validated periodic profile repeated around the shaft.
 
 
 
-`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
+`readonly` `optional` **resolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
 
 
 
@@ -183,7 +183,7 @@ Number of evenly phased starts. Default: `1`.
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md)
 
 
 
@@ -197,9 +197,6 @@ Optional numerical tolerance overrides.
 ## Related APIs
 
 - [Bevel](Bevel.md)
-- [GeometryResolution](GeometryResolution.md)
-- [GeometryToleranceOptions](GeometryToleranceOptions.md)
-- [ModelingLimits](ModelingLimits.md)
 - [PrintableThreadFit](PrintableThreadFit.md)
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
 - [ThreadBevelOptions](ThreadBevelOptions.md)
@@ -212,14 +209,10 @@ Optional numerical tolerance overrides.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { InternalThreadCutterOptions } from "@metamesh/modeling";
+import type { InternalThreadCutterOptions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { InternalThreadCutterOptions } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/KnuckleHingeBaseSpec.md

@@ -79,14 +79,10 @@ Nonnegative total air gap between each neighboring pair of knuckle ends.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { KnuckleHingeBaseSpec } from "@metamesh/modeling";
+import type { KnuckleHingeBaseSpec } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { KnuckleHingeBaseSpec } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/KnuckleHingeDimensions.md

@@ -128,7 +128,7 @@ Integral pin interval; null when the consumer supplies an inserted pin.
 
 
 
-`readonly` **axis**: [`Anchor3`](Anchor3-type.md)
+`readonly` **axis**: [`Anchor3`](../geometry/Anchor3-type.md)
 
 
 
@@ -137,7 +137,6 @@ Origin at the joint center, direction +X, roll guide +Z.
 
 ## Related APIs
 
-- [Anchor3](Anchor3-type.md)
 - [KnuckleHingeInterval](KnuckleHingeInterval.md)
 - [KnuckleHingeSpec](KnuckleHingeSpec.md)
 
@@ -145,10 +144,10 @@ Origin at the joint center, direction +X, roll guide +Z.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { KnuckleHingeDimensions } from "@metamesh/modeling/geometry";
+import type { KnuckleHingeDimensions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/KnuckleHingeInterval.md

@@ -43,10 +43,10 @@ Axial length, excluding the neighboring gaps.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { KnuckleHingeInterval } from "@metamesh/modeling/geometry";
+import type { KnuckleHingeInterval } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/KnuckleHingeSamplingOptions.md

@@ -20,7 +20,7 @@ Exact full-circle count, divisible by four and at least four; overrides adaptive
 
 
 
-`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
+`readonly` `optional` **resolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
 
 
 
@@ -32,30 +32,21 @@ Physical tessellation policy. Exact circular counts must also be divisible by fo
 
 
 
-`readonly` `optional` **limits?**: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>
+`readonly` `optional` **limits?**: `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\>
 
 
 
 Explicit allocation ceilings; defaults to the pure geometry sampling limits.
 
 
-## Related APIs
-
-- [GeometryResolution](GeometryResolution.md)
-- [GeometrySamplingLimits](GeometrySamplingLimits.md)
-
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
-
-```ts
-import type { KnuckleHingeSamplingOptions } from "@metamesh/modeling";
-```
+## Import
 
 ```ts
-import type { KnuckleHingeSamplingOptions } from "@metamesh/modeling/geometry";
+import type { KnuckleHingeSamplingOptions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/KnuckleHingeSpec.md

@@ -19,14 +19,10 @@ Lift-off requires exactly two intervals; A's integral pin enters B without a far
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { KnuckleHingeSpec } from "@metamesh/modeling";
+import type { KnuckleHingeSpec } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { KnuckleHingeSpec } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/METRIC_FASTENER_STANDARDS.md

@@ -19,10 +19,10 @@ responsibilities.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { METRIC_FASTENER_STANDARDS } from "@metamesh/modeling/geometry";
+import { METRIC_FASTENER_STANDARDS } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/MetricFastenerSize.md

@@ -11,10 +11,10 @@ Supported metric fastener sizes.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { MetricFastenerSize } from "@metamesh/modeling/geometry";
+import type { MetricFastenerSize } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/MetricFastenerStandard.md

@@ -73,10 +73,10 @@ Socket-head cap screw envelope and drive size.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { MetricFastenerStandard } from "@metamesh/modeling/geometry";
+import type { MetricFastenerStandard } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/MetricHexNutDimensions.md

@@ -31,10 +31,10 @@ Nominal full-nut thickness.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { MetricHexNutDimensions } from "@metamesh/modeling/geometry";
+import type { MetricHexNutDimensions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/MetricSocketCapHeadDimensions.md

@@ -43,10 +43,10 @@ Nominal internal hex key size across flats.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { MetricSocketCapHeadDimensions } from "@metamesh/modeling/geometry";
+import type { MetricSocketCapHeadDimensions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/PRINTABLE_THREAD_FIT_POLICIES.md

@@ -18,10 +18,10 @@ calibrate them for its printer, material, layer height, and thread scale.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { PRINTABLE_THREAD_FIT_POLICIES } from "@metamesh/modeling/geometry";
+import { PRINTABLE_THREAD_FIT_POLICIES } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/PrintableThreadFit.md

@@ -11,14 +11,10 @@ Named baseline fit policies for calibrated FDM-style printed threads.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { PrintableThreadFit } from "@metamesh/modeling";
+import type { PrintableThreadFit } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { PrintableThreadFit } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/PrintableThreadFitPolicy.md

@@ -47,14 +47,10 @@ Radial reduction applied to an external thread envelope.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { PrintableThreadFitPolicy } from "@metamesh/modeling";
+import type { PrintableThreadFitPolicy } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { PrintableThreadFitPolicy } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/RackPitchDimensions.md

@@ -115,10 +115,10 @@ Normal module supplied by the caller, in millimetres.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { RackPitchDimensions } from "@metamesh/modeling/geometry";
+import type { RackPitchDimensions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.