@metamesh/modeling 0.19.0 → 0.20.0

package/dist/docs/reference/{geometry → mechanical}/ThreadedNutOptions.md

@@ -69,7 +69,7 @@ Use [0, "auto"] to keep the outside bottom flat without disabling its inner open
 
 
 
-`readonly` `optional` **bodyResolution?**: [`GeometryResolution`](GeometryResolution.md)
+`readonly` `optional` **bodyResolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
 
 
 
@@ -150,7 +150,7 @@ Helix direction. Default: `right`.
 
 
 
-`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](ModelingLimits.md)\>
+`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\>
 
 
 
@@ -198,7 +198,7 @@ Validated periodic profile repeated around the shaft.
 
 
 
-`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
+`readonly` `optional` **resolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
 
 
 
@@ -230,7 +230,7 @@ Number of evenly phased starts. Default: `1`.
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md)
 
 
 
@@ -244,10 +244,7 @@ Optional numerical tolerance overrides.
 ## Related APIs
 
 - [Bevel](Bevel.md)
-- [GeometryResolution](GeometryResolution.md)
-- [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [InternalThreadCutterOptions](InternalThreadCutterOptions.md)
-- [ModelingLimits](ModelingLimits.md)
 - [PrintableThreadFit](PrintableThreadFit.md)
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
 - [ThreadedNutShape](ThreadedNutShape.md)
@@ -259,14 +256,10 @@ Optional numerical tolerance overrides.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { ThreadedNutOptions } from "@metamesh/modeling";
+import type { ThreadedNutOptions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { ThreadedNutOptions } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/ThreadedNutPreflight.md

@@ -107,14 +107,10 @@ Start-aligned circular facet count used by the compensated thread cutter.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { ThreadedNutPreflight } from "@metamesh/modeling";
+import type { ThreadedNutPreflight } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { ThreadedNutPreflight } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/ThreadedNutShape.md

@@ -11,14 +11,10 @@ Supported printable nut body shapes.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { ThreadedNutShape } from "@metamesh/modeling";
+import type { ThreadedNutShape } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { ThreadedNutShape } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/ThreadedRodOptions.md

@@ -103,7 +103,7 @@ Total threaded axial length in millimetres.
 
 
 
-`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](ModelingLimits.md)\>
+`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\>
 
 
 
@@ -151,7 +151,7 @@ Validated periodic profile repeated around the shaft.
 
 
 
-`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
+`readonly` `optional` **resolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
 
 
 
@@ -183,7 +183,7 @@ Number of evenly phased starts. Default: `1`.
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md)
 
 
 
@@ -197,9 +197,6 @@ Optional numerical tolerance overrides.
 ## Related APIs
 
 - [Bevel](Bevel.md)
-- [GeometryResolution](GeometryResolution.md)
-- [GeometryToleranceOptions](GeometryToleranceOptions.md)
-- [ModelingLimits](ModelingLimits.md)
 - [PrintableThreadFit](PrintableThreadFit.md)
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
 - [ThreadBevelOptions](ThreadBevelOptions.md)
@@ -212,14 +209,10 @@ Optional numerical tolerance overrides.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { ThreadedRodOptions } from "@metamesh/modeling";
+import type { ThreadedRodOptions } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { ThreadedRodOptions } from "@metamesh/modeling/geometry";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/TrapezoidalThreadProfileSpec.md

@@ -28,7 +28,7 @@ Adjacent axial thread spacing in millimetres.
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md)
 
 
 
@@ -86,25 +86,16 @@ Each flank uses half this angle from the radial direction; `90` gives 45-degree
 
 ## Related APIs
 
-- [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { TrapezoidalThreadProfileSpec } from "@metamesh/modeling";
+import type { TrapezoidalThreadProfileSpec } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { TrapezoidalThreadProfileSpec } from "@metamesh/modeling/geometry";
-```
-
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/TriangularThreadProfileSpec.md

@@ -28,7 +28,7 @@ Adjacent axial thread spacing in millimetres.
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md)
 
 
 
@@ -85,25 +85,16 @@ Root width divided by pitch.
 
 ## Related APIs
 
-- [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { TriangularThreadProfileSpec } from "@metamesh/modeling";
+import type { TriangularThreadProfileSpec } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-```ts
-import type { TriangularThreadProfileSpec } from "@metamesh/modeling/geometry";
-```
-
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/categories/mechanical.md

@@ -30,7 +30,7 @@ Thread and gear results are modeling aids, not certified manufacturing or streng
 | [sampleCylindricalGearOutline](../sampleCylindricalGearOutline.md) | Samples a complete external involute gear boundary in the XY plane. |
 | [sampleInternalCylindricalGearSpaceOutline](../sampleInternalCylindricalGearSpaceOutline.md) | Samples the center opening and tooth spaces used to subtract an internal ring gear. |
 | [sampleRackToothPath](../sampleRackToothPath.md) | Samples the open top boundary of a finite rack in its XY pitch plane. |
-| [sampleThreadHelices](../sampleThreadHelices.md) | Samples evenly phased thread helices with finite `lead = pitch * starts`. All starts together respect maxPathPoints (default 100000); excessive counts fail before allocation. |
+| [sampleThreadHelices](../sampleThreadHelices.md) | Samples evenly phased thread helices with finite `lead = pitch * starts`. All starts together respect `maxPathPoints`; excessive counts fail before allocation. |
 
 ## Interfaces
 
@@ -108,4 +108,10 @@ Thread and gear results are modeling aids, not certified manufacturing or streng
 
 - [Conservative estimates and preflight guarantees](../../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.19.0`.
+## Import
+
+```ts
+import * as mechanical from "@metamesh/modeling/geometry/mechanical";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/compensateThreadDiameters.md

@@ -32,7 +32,7 @@ allowances as radial mating clearance.
 
   Named policy or explicit caller-calibrated allowances.
 
-- [`tolerance`](ThreadCompensationOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
+- [`tolerance`](ThreadCompensationOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
@@ -52,10 +52,10 @@ allowances as radial mating clearance.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { compensateThreadDiameters } from "@metamesh/modeling/geometry";
+import { compensateThreadDiameters } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/compensateThreadProfileAxially.md

@@ -6,9 +6,9 @@ Applies axial fit allowance to a validated periodic profile.
 
 
 
-Male crests/ridges narrow by the requested backlash; female cutter ridges
-widen by it. Periodic root endpoints remain fixed so pitch and lead do not
-change. The returned profile is a new deeply immutable value.
+Each flank moves by one quarter of the mating pair's total backlash: male ridges narrow and
+female cutter ridges widen. Periodic root endpoints remain fixed, preserving pitch and lead.
+Changed profiles are deeply immutable; zero backlash returns the input unchanged.
 
 ## Parameters
 
@@ -16,18 +16,24 @@ change. The returned profile is a new deeply immutable value.
 
 **`profile`** · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
+Validated `[axial, radial]` profile in millimetres.
+
 
 
 <a id="axialbacklash"></a>
 
 **`axialBacklash`** · `number` · Required
 
+Nonnegative total pair allowance in millimetres, below half the pitch.
+
 
 
 <a id="role"></a>
 
 **`role`** · `"female"` \| `"male"` · Required
 
+Male ridge to narrow or female cutter ridge to widen.
+
 
 
 ## Returns
@@ -43,10 +49,10 @@ change. The returned profile is a new deeply immutable value.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { compensateThreadProfileAxially } from "@metamesh/modeling/geometry";
+import { compensateThreadProfileAxially } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/compensateThreadProfileForFaceting.md

@@ -18,30 +18,40 @@ it exactly.
 
 **`profile`** · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
+Uncompensated `[axial, radial]` profile in millimetres.
+
 
 
 <a id="axialbacklash"></a>
 
 **`axialBacklash`** · `number` · Required
 
+Nonnegative total pair allowance in millimetres, below half the pitch.
+
 
 
 <a id="role"></a>
 
 **`role`** · `"female"` \| `"male"` · Required
 
+Male ridge or female cutter receiving its share of the allowances.
+
 
 
 <a id="starts"></a>
 
 **`starts`** · `number` · Required
 
+Integer start count from 1 through 32.
+
 
 
 <a id="circularsegments"></a>
 
 **`circularSegments`** · `number` · Required
 
+Full-circle facet count, at least 3 and divisible by starts.
+
 
 
 ## Returns
@@ -57,10 +67,10 @@ it exactly.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { compensateThreadProfileForFaceting } from "@metamesh/modeling/geometry";
+import { compensateThreadProfileForFaceting } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/getMetricClearanceHoleDiameter.md

@@ -34,10 +34,10 @@ Returns one recommended metric clearance-hole diameter in millimetres.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { getMetricClearanceHoleDiameter } from "@metamesh/modeling/geometry";
+import { getMetricClearanceHoleDiameter } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/getMetricFastenerStandard.md

@@ -28,10 +28,10 @@ Returns the immutable standards record for one supported metric size.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { getMetricFastenerStandard } from "@metamesh/modeling/geometry";
+import { getMetricFastenerStandard } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/measureInternalCylindricalGearPairMotion.md

@@ -7,10 +7,10 @@ Measures sampled kinematic interference over one tooth cycle of an internal gear
 
 
 The driver and ring start with half-tooth offsets for odd tooth counts, then rotate in the
-same direction at their resolved tooth-count ratio. Each
-sampled pinion outline is subtracted from the ring's center-and-space opening; remaining area is
-solid overlap. This catches involute, tip, and trimming interference that a single assembled pose
-misses. It is a deterministic model check, not a certified gear-rating calculation.
+same direction at their resolved tooth-count ratio. Subtracting the ring's center-and-space
+opening from each sampled pinion outline leaves the area overlapping ring material. This detects
+involute, tip, and trimming interference that a single assembled pose misses.
+It is a deterministic model check, not a certified gear-rating calculation.
 
 ## Parameters
 
@@ -18,6 +18,8 @@ misses. It is a deterministic model check, not a certified gear-rating calculati
 
 **`spec`** · [`CylindricalGearPairSpec`](CylindricalGearPairSpec.md) · Required
 
+Internal pair: external driver pinion and internal driven ring.
+
 
 
 <a id="options"></a>
@@ -49,10 +51,10 @@ misses. It is a deterministic model check, not a certified gear-rating calculati
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { measureInternalCylindricalGearPairMotion } from "@metamesh/modeling/geometry";
+import { measureInternalCylindricalGearPairMotion } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/minimumCylindricalGearToothCountWithoutUndercut.md

@@ -15,6 +15,8 @@ count `z_v = z / cos³(beta)`, so increasing helix angle can reduce the physical
 
 **`spec`** · `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngle"` \| `"pressureAngle"`\>\> · Optional
 
+Pressure and signed helix angles in degrees; defaults are 20 and zero.
+
 
 
 ## Returns
@@ -30,10 +32,10 @@ count `z_v = z / cos³(beta)`, so increasing helix angle can reduce the physical
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { minimumCylindricalGearToothCountWithoutUndercut } from "@metamesh/modeling/geometry";
+import { minimumCylindricalGearToothCountWithoutUndercut } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/preflightInternalThreadCutter.md

@@ -20,6 +20,8 @@ See `mesh.threadSolid` for standalone mesh construction.
 
 **`options`** · [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md) · Required
 
+Nominal cavity dimensions in millimetres, before fit and face extension.
+
 - [`nominalMajorDiameter`](InternalThreadCutterOptions.md#nominalmajordiameter) · `number` · Required
 
   Nominal major diameter before female compensation and faceting correction.
@@ -50,7 +52,7 @@ See `mesh.threadSolid` for standalone mesh construction.
 
   Helix direction. Default: `right`.
 
-- [`limits`](InternalThreadCutterOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
+- [`limits`](InternalThreadCutterOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and circular allocation ceilings.
 
@@ -58,7 +60,7 @@ See `mesh.threadSolid` for standalone mesh construction.
 
   Angular offset of the first start in degrees. Default: `0`.
 
-- [`resolution`](InternalThreadCutterOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](InternalThreadCutterOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional circular-resolution policy.
 
@@ -66,7 +68,7 @@ See `mesh.threadSolid` for standalone mesh construction.
 
   Number of evenly phased starts. Default: `1`.
 
-- [`tolerance`](InternalThreadCutterOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
+- [`tolerance`](InternalThreadCutterOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
@@ -86,10 +88,10 @@ See `mesh.threadSolid` for standalone mesh construction.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { preflightInternalThreadCutter } from "@metamesh/modeling/geometry";
+import { preflightInternalThreadCutter } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/preflightThreadedNut.md

@@ -19,6 +19,8 @@ See `mesh.preflightThreadSolid` for standalone mesh estimates.
 
 **`options`** · [`ThreadedNutOptions`](ThreadedNutOptions.md) · Required
 
+Nominal nut dimensions in millimetres, fit, and sampling controls.
+
 - [`nominalMajorDiameter`](ThreadedNutOptions.md#nominalmajordiameter) · `number` · Required
 
   Nominal major diameter before female compensation and faceting correction.
@@ -52,7 +54,7 @@ See `mesh.preflightThreadSolid` for standalone mesh estimates.
   Body bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4).
   Use [0, "auto"] to keep the outside bottom flat without disabling its inner opening bevel.
 
-- [`bodyResolution`](ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`bodyResolution`](ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional physical policy for a round body, independent of the thread's matched facet grid.
 
@@ -65,7 +67,7 @@ See `mesh.preflightThreadSolid` for standalone mesh estimates.
 
   Helix direction. Default: `right`.
 
-- [`limits`](ThreadedNutOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
+- [`limits`](ThreadedNutOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and circular allocation ceilings.
 
@@ -73,7 +75,7 @@ See `mesh.preflightThreadSolid` for standalone mesh estimates.
 
   Angular offset of the first start in degrees. Default: `0`.
 
-- [`resolution`](ThreadedNutOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](ThreadedNutOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional circular-resolution policy.
 
@@ -81,7 +83,7 @@ See `mesh.preflightThreadSolid` for standalone mesh estimates.
 
   Number of evenly phased starts. Default: `1`.
 
-- [`tolerance`](ThreadedNutOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
+- [`tolerance`](ThreadedNutOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
@@ -101,10 +103,10 @@ See `mesh.preflightThreadSolid` for standalone mesh estimates.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { preflightThreadedNut } from "@metamesh/modeling/geometry";
+import { preflightThreadedNut } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/preflightThreadedRod.md

@@ -19,6 +19,8 @@ See `mesh.threadSolid` for standalone mesh construction.
 
 **`options`** · [`ThreadedRodOptions`](ThreadedRodOptions.md) · Required
 
+Nominal rod dimensions in millimetres, fit, and sampling controls.
+
 - [`nominalMajorDiameter`](ThreadedRodOptions.md#nominalmajordiameter) · `number` · Required
 
   Nominal major diameter before male compensation.
@@ -49,7 +51,7 @@ See `mesh.threadSolid` for standalone mesh construction.
 
   Helix direction. Default: `right`.
 
-- [`limits`](ThreadedRodOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
+- [`limits`](ThreadedRodOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and circular allocation ceilings.
 
@@ -57,7 +59,7 @@ See `mesh.threadSolid` for standalone mesh construction.
 
   Angular offset of the first start in degrees. Default: `0`.
 
-- [`resolution`](ThreadedRodOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](ThreadedRodOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional circular-resolution policy.
 
@@ -65,7 +67,7 @@ See `mesh.threadSolid` for standalone mesh construction.
 
   Number of evenly phased starts. Default: `1`.
 
-- [`tolerance`](ThreadedRodOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
+- [`tolerance`](ThreadedRodOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
@@ -85,10 +87,10 @@ See `mesh.threadSolid` for standalone mesh construction.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { preflightThreadedRod } from "@metamesh/modeling/geometry";
+import { preflightThreadedRod } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/resolveCylindricalGear.md

@@ -16,6 +16,8 @@ currently supported.
 
 **`spec`** · [`CylindricalGearSpec`](CylindricalGearSpec.md) · Required
 
+Nominal gear dimensions in millimetres and degrees.
+
 
 
 ## Returns
@@ -32,10 +34,10 @@ currently supported.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { resolveCylindricalGear } from "@metamesh/modeling/geometry";
+import { resolveCylindricalGear } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.