@metamesh/modeling 0.19.0 → 0.20.0

package/dist/docs/reference/{geometry → mechanical}/resolveCylindricalGearPair.md

@@ -16,6 +16,8 @@ the same hand. The function validates those conjugate pitch invariants.
 
 **`spec`** · [`CylindricalGearPairSpec`](CylindricalGearPairSpec.md) · Required
 
+Driver and driven gears using the same normal pitch system.
+
 
 
 ## Returns
@@ -32,10 +34,10 @@ the same hand. The function validates those conjugate pitch invariants.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { resolveCylindricalGearPair } from "@metamesh/modeling/geometry";
+import { resolveCylindricalGearPair } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/resolveKnuckleHinge.md

@@ -11,8 +11,8 @@ shaft's complete rotational envelope. Adaptive sampling satisfies both face and
 bounds; an insufficient ceiling rejects instead of reducing quality. Exact counts are intentional
 facets. Zero allowances describe ideal contact, not a printable running fit.
 
-Rejects nonfinite or nonpositive dimensions, invalid mode/count combinations, exhausted axial
-length, missing/excessive lift-off engagement, and nonpositive conservative faceted barrel walls.
+Rejects non-finite or non-positive dimensions, invalid mode/count combinations, exhausted axial
+length, missing/excessive lift-off engagement, and non-positive conservative faceted barrel walls.
 Manufacturing minima, strength, mounting, retention, handedness, and motion remain caller policy.
 
 ## Parameters
@@ -21,6 +21,8 @@ Manufacturing minima, strength, mounting, retention, handedness, and motion rema
 
 **`spec`** · [`KnuckleHingeSpec`](KnuckleHingeSpec.md) · Required
 
+Joint dimensions in millimetres, mode, and knuckle count.
+
 
 
 <a id="options"></a>
@@ -31,11 +33,11 @@ Manufacturing minima, strength, mounting, retention, handedness, and motion rema
 
   Exact full-circle count, divisible by four and at least four; overrides adaptive sampling.
 
-- [`resolution`](KnuckleHingeSamplingOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](KnuckleHingeSamplingOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Physical tessellation policy. Exact circular counts must also be divisible by four.
 
-- [`limits`](KnuckleHingeSamplingOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](KnuckleHingeSamplingOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Explicit allocation ceilings; defaults to the pure geometry sampling limits.
 
@@ -56,10 +58,10 @@ Manufacturing minima, strength, mounting, retention, handedness, and motion rema
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { resolveKnuckleHinge } from "@metamesh/modeling/geometry";
+import { resolveKnuckleHinge } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/resolvePrintableThreadFitPolicy.md

@@ -12,6 +12,8 @@ Resolves and validates a named or caller-defined print-fit policy.
 
 **`fit`** · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
 
+Named fit or non-negative per-side radial and total axial allowances, in millimetres.
+
 
 
 ## Returns
@@ -28,10 +30,10 @@ Resolves and validates a named or caller-defined print-fit policy.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { resolvePrintableThreadFitPolicy } from "@metamesh/modeling/geometry";
+import { resolvePrintableThreadFitPolicy } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/resolveRackPitch.md

@@ -12,6 +12,8 @@ Resolves a rack segment that is conjugate with the same normal cylindrical pitch
 
 **`spec`** · [`RackPitchSpec`](RackPitchSpec.md) · Required
 
+Rack dimensions in millimetres and degrees.
+
 
 
 ## Returns
@@ -28,10 +30,10 @@ Resolves a rack segment that is conjugate with the same normal cylindrical pitch
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { resolveRackPitch } from "@metamesh/modeling/geometry";
+import { resolveRackPitch } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/resolveThreadCircularSegments.md

@@ -15,6 +15,8 @@ raised. Adaptive policies align upward and fail if that would exceed `maxSegment
 
 **`options`** · [`ThreadCircularSegmentsOptions`](ThreadCircularSegmentsOptions.md) · Required
 
+Nominal diameter, uncompensated profile, and shared mating resolution.
+
 - [`nominalMajorDiameter`](ThreadCircularSegmentsOptions.md#nominalmajordiameter) · `number` · Required
 
   Nominal major diameter before role-specific compensation.
@@ -23,7 +25,7 @@ raised. Adaptive policies align upward and fail if that would exceed `maxSegment
 
   Validated mating profile whose pitch and flank capacities govern tessellation.
 
-- [`limits`](ThreadCircularSegmentsOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](ThreadCircularSegmentsOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Explicit circular allocation ceiling for the shared mating grid.
 
@@ -37,7 +39,7 @@ raised. Adaptive policies align upward and fail if that would exceed `maxSegment
   This keeps a compensated male/female pair on one role-independent grid when an internal
   cutter has an enlarged entrance bevel. Default: `0`.
 
-- [`resolution`](ThreadCircularSegmentsOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](ThreadCircularSegmentsOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Physical or exact circular resolution policy.
 
@@ -60,10 +62,10 @@ raised. Adaptive policies align upward and fail if that would exceed `maxSegment
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { resolveThreadCircularSegments } from "@metamesh/modeling/geometry";
+import { resolveThreadCircularSegments } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/sampleCylindricalGearOutline.md

@@ -2,7 +2,7 @@
 
 Samples a complete external involute gear boundary in the XY plane.
 
-**sampleCylindricalGearOutline**(`spec`: [`CylindricalGearSpec`](CylindricalGearSpec.md), `options?`: [`CylindricalGearOutlineOptions`](CylindricalGearOutlineOptions.md)): [`Contour`](Contour.md)
+**sampleCylindricalGearOutline**(`spec`: [`CylindricalGearSpec`](CylindricalGearSpec.md), `options?`: [`CylindricalGearOutlineOptions`](CylindricalGearOutlineOptions.md)): [`Contour`](../geometry/Contour.md)
 
 
 
@@ -16,6 +16,8 @@ seam point, and contains no holes. Its center is the origin and its axis is
 
 **`spec`** · [`CylindricalGearSpec`](CylindricalGearSpec.md) · Required
 
+External gear dimensions in millimetres and degrees; undercut profiles reject.
+
 
 
 <a id="options"></a>
@@ -30,11 +32,11 @@ seam point, and contains no holes. Its center is the origin and its axis is
 
   Exact samples along each bottom land, at least one, within selected circular/profile ceilings.
 
-- [`limits`](CylindricalGearOutlineOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](CylindricalGearOutlineOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Explicit profile and circular allocation ceilings.
 
-- [`resolution`](CylindricalGearOutlineOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](CylindricalGearOutlineOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Explicit physical sampling policy for adaptive defaults.
 
@@ -46,12 +48,11 @@ seam point, and contains no holes. Its center is the origin and its axis is
 
 ## Returns
 
-[`Contour`](Contour.md)
+[`Contour`](../geometry/Contour.md)
 
 
 ## Related APIs
 
-- [Contour](Contour.md)
 - [CylindricalGearOutlineOptions](CylindricalGearOutlineOptions.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
@@ -59,10 +60,10 @@ seam point, and contains no holes. Its center is the origin and its axis is
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { sampleCylindricalGearOutline } from "@metamesh/modeling/geometry";
+import { sampleCylindricalGearOutline } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/sampleInternalCylindricalGearSpaceOutline.md

@@ -2,7 +2,7 @@
 
 Samples the center opening and tooth spaces used to subtract an internal ring gear.
 
-**sampleInternalCylindricalGearSpaceOutline**(`spec`: [`CylindricalGearSpec`](CylindricalGearSpec.md), `options?`: [`CylindricalGearOutlineOptions`](CylindricalGearOutlineOptions.md)): [`Contour`](Contour.md)
+**sampleInternalCylindricalGearSpaceOutline**(`spec`: [`CylindricalGearSpec`](CylindricalGearSpec.md), `options?`: [`CylindricalGearOutlineOptions`](CylindricalGearOutlineOptions.md)): [`Contour`](../geometry/Contour.md)
 
 
 
@@ -17,6 +17,8 @@ when used as a region hole.
 
 **`spec`** · [`CylindricalGearSpec`](CylindricalGearSpec.md) · Required
 
+Internal ring dimensions in millimetres and degrees; backlash widens tooth spaces.
+
 
 
 <a id="options"></a>
@@ -31,11 +33,11 @@ when used as a region hole.
 
   Exact samples along each bottom land, at least one, within selected circular/profile ceilings.
 
-- [`limits`](CylindricalGearOutlineOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](CylindricalGearOutlineOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Explicit profile and circular allocation ceilings.
 
-- [`resolution`](CylindricalGearOutlineOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](CylindricalGearOutlineOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Explicit physical sampling policy for adaptive defaults.
 
@@ -47,12 +49,11 @@ when used as a region hole.
 
 ## Returns
 
-[`Contour`](Contour.md)
+[`Contour`](../geometry/Contour.md)
 
 
 ## Related APIs
 
-- [Contour](Contour.md)
 - [CylindricalGearOutlineOptions](CylindricalGearOutlineOptions.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
@@ -60,10 +61,10 @@ when used as a region hole.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { sampleInternalCylindricalGearSpaceOutline } from "@metamesh/modeling/geometry";
+import { sampleInternalCylindricalGearSpaceOutline } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/sampleRackToothPath.md

@@ -2,7 +2,7 @@
 
 Samples the open top boundary of a finite rack in its XY pitch plane.
 
-**sampleRackToothPath**(`spec`: [`RackPitchSpec`](RackPitchSpec.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): readonly [`Vector2Data`](Vector2Data.md)[]
+**sampleRackToothPath**(`spec`: [`RackPitchSpec`](RackPitchSpec.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\>): readonly [`Vector2Data`](../geometry/Vector2Data.md)[]
 
 
 
@@ -17,33 +17,35 @@ the owning generator.
 
 **`spec`** · [`RackPitchSpec`](RackPitchSpec.md) · Required
 
+Rack dimensions in millimetres and degrees, along +X.
+
 
 
 <a id="limits"></a>
 
-**`limits`** · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+**`limits`** · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
+
+Sampling limits; exceeding them throws without coarsening.
 
 
 
 ## Returns
 
-readonly [`Vector2Data`](Vector2Data.md)[]
+readonly [`Vector2Data`](../geometry/Vector2Data.md)[]
 
 
 ## Related APIs
 
-- [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [RackPitchSpec](RackPitchSpec.md)
-- [Vector2Data](Vector2Data.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { sampleRackToothPath } from "@metamesh/modeling/geometry";
+import { sampleRackToothPath } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/sampleThreadHelices.md

@@ -1,6 +1,6 @@
 # sampleThreadHelices
 
-Samples evenly phased thread helices with finite `lead = pitch * starts`. All starts together respect maxPathPoints (default 100000); excessive counts fail before allocation.
+Samples evenly phased thread helices with finite `lead = pitch * starts`. All starts together respect `maxPathPoints`; excessive counts fail before allocation.
 
 **sampleThreadHelices**(`options`: [`ThreadHelixOptions`](ThreadHelixOptions.md)): [`SampledThreadHelices`](SampledThreadHelices.md)
 
@@ -12,6 +12,8 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 
 **`options`** · [`ThreadHelixOptions`](ThreadHelixOptions.md) · Required
 
+Dimensions in millimetres; lead is pitch multiplied by starts.
+
 - [`length`](ThreadHelixOptions.md#length) · `number` · Required
 
   Total sampled axial length in millimetres.
@@ -28,7 +30,7 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 
   Helix direction. Default: `right`.
 
-- [`limits`](ThreadHelixOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](ThreadHelixOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Explicit aggregate path allocation ceilings across all starts.
 
@@ -44,7 +46,7 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 
   Number of evenly phased helices. Default: `1`.
 
-- [`tolerance`](ThreadHelixOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
+- [`tolerance`](ThreadHelixOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
@@ -64,10 +66,10 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { sampleThreadHelices } from "@metamesh/modeling/geometry";
+import { sampleThreadHelices } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mechanical}/threadProfile.md

@@ -9,6 +9,8 @@ Creates a periodic thread profile for the shaft-locked helical mesher.
 ## Example: Printable triangular thread profile
 
 ```ts
+import { threadProfile } from "@metamesh/modeling/geometry/mechanical";
+
 threadProfile({ kind: "triangular", pitch: 1.75 });
 ```
 
@@ -22,6 +24,8 @@ non-decreasing, periodic at their endpoints, and reach radial zero.
 
 **`spec`** · [`ThreadProfileSpec`](ThreadProfileSpec.md) · Required
 
+Profile family or custom one-pitch `[axial, radial]` path, in millimetres.
+
 
 
 ## Returns
@@ -38,10 +42,10 @@ non-decreasing, periodic at their endpoints, and reach radial zero.
 
 - [Conservative estimates and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import { threadProfile } from "@metamesh/modeling/geometry";
+import { threadProfile } from "@metamesh/modeling/geometry/mechanical";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mechanical.md

@@ -0,0 +1,19 @@
+# Mechanical geometry
+
+Mechanical dimensions, fit policies, standards, and preflight calculations.
+
+Use @metamesh/modeling/geometry/mechanical for pure mechanical dimensions, gear outlines, thread profiles, fit policies, fastener standards, and preflight calculations. Results describe geometry and sampling, without certifying strength, printer fit, or a metrology class. Modeling constructors such as threadedRod and knuckleHinge remain in @metamesh/modeling.
+
+Preflights use explicit resolution and limits or package defaults. During generation, pass the effective resolution and limits from the callback context.
+
+## Categories
+
+- [Mechanical foundations](mechanical/categories/mechanical.md) — Resolve gears, knuckle joints, fastener standards, thread profiles, fit, and predictable allocations.
+
+## Import
+
+```ts
+import * as mechanical from "@metamesh/modeling/geometry/mechanical";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/ExtrudeMeshOptions.md

@@ -0,0 +1,128 @@
+# ExtrudeMeshOptions
+
+Dimensions and sampling for pure +Z mesh extrusion, without end treatments.
+
+## Extends
+
+- [`ExtrusionSamplingOptions`](../geometry/ExtrusionSamplingOptions.md)
+
+## Extended by
+
+- [`ExtrudeOptions`](../model/ExtrudeOptions.md)
+
+## Properties
+
+### slices?
+
+
+
+`readonly` `optional` **slices?**: `number`
+
+
+
+Positive longitudinal interval count; n slices create n + 1 profile layers. Overrides ordinary extrusion's physical sampling.
+
+#### Inherited from
+
+[`ExtrusionSamplingOptions`](../geometry/ExtrusionSamplingOptions.md).[`slices`](../geometry/ExtrusionSamplingOptions.md#slices)
+
+***
+
+### limits?
+
+
+
+`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\>
+
+
+
+Explicit output and sampling allocation ceilings.
+
+#### Inherited from
+
+[`ExtrusionSamplingOptions`](../geometry/ExtrusionSamplingOptions.md).[`limits`](../geometry/ExtrusionSamplingOptions.md#limits)
+
+***
+
+### resolution?
+
+
+
+`readonly` `optional` **resolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
+
+
+
+Operation-level physical policy over the nearest model scope.
+
+#### Inherited from
+
+[`ExtrusionSamplingOptions`](../geometry/ExtrusionSamplingOptions.md).[`resolution`](../geometry/ExtrusionSamplingOptions.md#resolution)
+
+***
+
+### scale?
+
+
+
+`readonly` `optional` **scale?**: `number` \| [`Vector2Input`](../geometry/Vector2Input.md)
+
+
+
+Final profile-local uniform or XY scale, interpolated from one before twisting. Both components must be positive or both zero for an apex of one simple boundary. Defaults to one.
+
+#### Inherited from
+
+[`ExtrusionSamplingOptions`](../geometry/ExtrusionSamplingOptions.md).[`scale`](../geometry/ExtrusionSamplingOptions.md#scale)
+
+***
+
+### twist?
+
+
+
+`readonly` `optional` **twist?**: `number`
+
+
+
+Finite rotation of the top profile about +Z, in degrees; defaults to zero.
+
+#### Inherited from
+
+[`ExtrusionSamplingOptions`](../geometry/ExtrusionSamplingOptions.md).[`twist`](../geometry/ExtrusionSamplingOptions.md#twist)
+
+***
+
+### height
+
+
+
+`readonly` **height**: `number`
+
+
+
+Positive extrusion height in millimetres.
+
+***
+
+### center?
+
+
+
+`readonly` `optional` **center?**: `boolean`
+
+
+
+Center the extrusion on Z; otherwise its bottom is at zero. Defaults to false.
+
+
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
+
+## Import
+
+```ts
+import type { ExtrudeMeshOptions } from "@metamesh/modeling/geometry/mesh";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mesh}/HeightfieldMeshLimits.md

@@ -1,28 +1,20 @@
 # HeightfieldMeshLimits
 
-Trusted output ceilings for pure construction; omitted fields use engine defaults.
+Trusted output ceilings for pure construction; omitted fields use package defaults.
 
-**HeightfieldMeshLimits** = `Partial`\<`Pick`\<[`ModelingLimits`](ModelingLimits.md), `"maxVertices"` \| `"maxTriangles"` \| `"maxBytes"`\>\>
+**HeightfieldMeshLimits** = `Partial`\<`Pick`\<[`ModelingLimits`](../geometry/ModelingLimits.md), `"maxVertices"` \| `"maxTriangles"` \| `"maxBytes"`\>\>
 
 
 
 
-## Related APIs
-
-- [ModelingLimits](ModelingLimits.md)
-
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
-
-```ts
-import type { HeightfieldMeshLimits } from "@metamesh/modeling/geometry";
-```
+## Import
 
 ```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
+import type { HeightfieldMeshLimits } from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mesh}/HeightfieldPreflight.md

@@ -55,14 +55,10 @@ Total bytes of Float32 positions and Uint32 indices, excluding temporary storage
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
+## Import
 
 ```ts
-import type { HeightfieldPreflight } from "@metamesh/modeling/geometry";
+import type { HeightfieldPreflight } from "@metamesh/modeling/geometry/mesh";
 ```
 
-```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
-```
-
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/{geometry → mesh}/ImmutableTriangleMesh.md

@@ -13,7 +13,7 @@ Immutable local XYZ positions and triangle indices, suitable for a memo result o
 
 
 
-`readonly` **positions**: [`ImmutableBuffer`](ImmutableBuffer-type.md)\<`Float32Array`\<`ArrayBufferLike`\>\>
+`readonly` **positions**: [`ImmutableBuffer`](../geometry/ImmutableBuffer-type.md)\<`Float32Array`\<`ArrayBufferLike`\>\>
 
 
 
@@ -25,33 +25,21 @@ Packed XYZ coordinates in millimetres.
 
 
 
-`readonly` **indices**: [`ImmutableBuffer`](ImmutableBuffer-type.md)\<`Uint32Array`\<`ArrayBufferLike`\>\>
+`readonly` **indices**: [`ImmutableBuffer`](../geometry/ImmutableBuffer-type.md)\<`Uint32Array`\<`ArrayBufferLike`\>\>
 
 
 
 Zero-based vertex indices, three per triangle.
 
 
-## Related APIs
-
-- [ImmutableBuffer](ImmutableBuffer-type.md)
-
 ## Guides
 
 - [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-## Supported imports
-
-```ts
-import type { ImmutableTriangleMesh } from "@metamesh/modeling";
-```
-
-```ts
-import type { ImmutableTriangleMesh } from "@metamesh/modeling/geometry";
-```
+## Import
 
 ```ts
-import * as mesh from "@metamesh/modeling/geometry/mesh";
+import type { ImmutableTriangleMesh } from "@metamesh/modeling/geometry/mesh";
 ```
 
-Package: `@metamesh/modeling@0.19.0`.
+Package: `@metamesh/modeling@0.20.0`.