@lightningjs/renderer 0.7.5 → 0.7.6

package/src/core/utils.ts

@@ -1,224 +1,224 @@
-/*
- * If not stated otherwise in this file or this component's LICENSE file the
- * following copyright and licenses apply:
- *
- * Copyright 2023 Comcast Cable Communications Management, LLC.
- *
- * Licensed under the Apache License, Version 2.0 (the License);
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/**
- * Core Utility Functions
- *
- * @module
- */
-
-import memo from 'memize';
-
-export const EPSILON = 0.000001;
-export let ARRAY_TYPE =
-  typeof Float32Array !== 'undefined' ? Float32Array : Array;
-export const RANDOM = Math.random;
-export const ANGLE_ORDER = 'zyx';
-const degree = Math.PI / 180;
-
-export const setMatrixArrayType = (
-  type: Float32ArrayConstructor | ArrayConstructor,
-) => {
-  ARRAY_TYPE = type;
-};
-
-export const toRadian = (a: number) => {
-  return a * degree;
-};
-
-export const equals = (a: number, b: number) => {
-  return Math.abs(a - b) <= EPSILON * Math.max(1.0, Math.abs(a), Math.abs(b));
-};
-
-export const rand = (min: number, max: number) => {
-  return Math.floor(Math.random() * (max - min + 1) + min);
-};
-
-export const isPowerOfTwo = (value: number) => {
-  return value && !(value & (value - 1));
-};
-
-const getTimingBezier = (
-  a: number,
-  b: number,
-  c: number,
-  d: number,
-): ((time: number) => number | undefined) => {
-  const xc = 3.0 * a;
-  const xb = 3.0 * (c - a) - xc;
-  const xa = 1.0 - xc - xb;
-  const yc = 3.0 * b;
-  const yb = 3.0 * (d - b) - yc;
-  const ya = 1.0 - yc - yb;
-
-  return function (time: number): number | undefined {
-    if (time >= 1.0) {
-      return 1;
-    }
-    if (time <= 0) {
-      return 0;
-    }
-
-    let t = 0.5,
-      cbx,
-      cbxd,
-      dx;
-
-    for (let it = 0; it < 20; it++) {
-      cbx = t * (t * (t * xa + xb) + xc);
-      dx = time - cbx;
-      if (dx > -1e-8 && dx < 1e-8) {
-        return t * (t * (t * ya + yb) + yc);
-      }
-
-      // Cubic bezier derivative.
-      cbxd = t * (t * (3 * xa) + 2 * xb) + xc;
-
-      if (cbxd > 1e-10 && cbxd < 1e-10) {
-        // Problematic. Fall back to binary search method.
-        break;
-      }
-
-      t += dx / cbxd;
-    }
-
-    // Fallback: binary search method. This is more reliable when there are near-0 slopes.
-    let minT = 0;
-    let maxT = 1;
-    for (let it = 0; it < 20; it++) {
-      t = 0.5 * (minT + maxT);
-
-      cbx = t * (t * (t * xa + xb) + xc);
-
-      dx = time - cbx;
-      if (dx > -1e-8 && dx < 1e-8) {
-        // Solution found!
-        return t * (t * (t * ya + yb) + yc);
-      }
-
-      if (dx < 0) {
-        maxT = t;
-      } else {
-        minT = t;
-      }
-    }
-  };
-};
-
-export const getTimingFunction = memo(
-  (str: string): ((time: number) => number | undefined) => {
-    switch (str) {
-      case 'linear':
-        return function (time: number) {
-          return time;
-        };
-      case 'ease':
-        return getTimingBezier(0.25, 0.1, 0.25, 1.0);
-
-      case 'ease-in':
-        return getTimingBezier(0.42, 0, 1.0, 1.0);
-      case 'ease-out':
-        return getTimingBezier(0, 0, 0.58, 1.0);
-      case 'ease-in-out':
-        return getTimingBezier(0.42, 0, 0.58, 1.0);
-
-      case 'ease-in-sine':
-        return getTimingBezier(0.12, 0, 0.39, 0);
-      case 'ease-out-sine':
-        return getTimingBezier(0.12, 0, 0.39, 0);
-      case 'ease-in-out-sine':
-        return getTimingBezier(0.37, 0, 0.63, 1);
-
-      case 'ease-in-cubic':
-        return getTimingBezier(0.32, 0, 0.67, 0);
-      case 'ease-out-cubic':
-        return getTimingBezier(0.33, 1, 0.68, 1);
-      case 'ease-in-out-cubic':
-        return getTimingBezier(0.65, 0, 0.35, 1);
-
-      case 'ease-in-circ':
-        return getTimingBezier(0.55, 0, 1, 0.45);
-      case 'ease-out-circ':
-        return getTimingBezier(0, 0.55, 0.45, 1);
-      case 'ease-in-out-circ':
-        return getTimingBezier(0.85, 0, 0.15, 1);
-
-      case 'ease-in-back':
-        return getTimingBezier(0.36, 0, 0.66, -0.56);
-      case 'ease-out-back':
-        return getTimingBezier(0.34, 1.56, 0.64, 1);
-      case 'ease-in-out-back':
-        return getTimingBezier(0.68, -0.6, 0.32, 1.6);
-
-      case 'step-start':
-        return function () {
-          return 1;
-        };
-      case 'step-end':
-        return function (time: number) {
-          return time === 1 ? 1 : 0;
-        };
-      default:
-        // eslint-disable-next-line no-case-declarations
-        const s = 'cubic-bezier(';
-        if (str && str.indexOf(s) === 0) {
-          const parts = str
-            .substr(s.length, str.length - s.length - 1)
-            .split(',');
-          if (parts.length !== 4) {
-            console.warn('Unknown timing function: ' + str);
-            // Fallback: use linear.
-            return function (time) {
-              return time;
-            };
-          }
-          const a = parseFloat(parts[0] || '0.42');
-          const b = parseFloat(parts[1] || '0');
-          const c = parseFloat(parts[2] || '1');
-          const d = parseFloat(parts[3] || '1');
-
-          if (isNaN(a) || isNaN(b) || isNaN(c) || isNaN(d)) {
-            console.warn(' Unknown timing function: ' + str);
-            // Fallback: use linear.
-            return function (time) {
-              return time;
-            };
-          }
-
-          return getTimingBezier(a, b, c, d);
-        } else {
-          console.warn('Unknown timing function: ' + str);
-          // Fallback: use linear.
-          return function (time) {
-            return time;
-          };
-        }
-    }
-  },
-);
-
-if (!Math.hypot)
-  Math.hypot = (...args: number[]) => {
-    let y = 0,
-      i = args.length;
-    while (i--) {
-      y += args[i]! * args[i]!;
-    }
-    return Math.sqrt(y);
-  };
+/*
+ * If not stated otherwise in this file or this component's LICENSE file the
+ * following copyright and licenses apply:
+ *
+ * Copyright 2023 Comcast Cable Communications Management, LLC.
+ *
+ * Licensed under the Apache License, Version 2.0 (the License);
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * Core Utility Functions
+ *
+ * @module
+ */
+
+import memo from 'memize';
+
+export const EPSILON = 0.000001;
+export let ARRAY_TYPE =
+  typeof Float32Array !== 'undefined' ? Float32Array : Array;
+export const RANDOM = Math.random;
+export const ANGLE_ORDER = 'zyx';
+const degree = Math.PI / 180;
+
+export const setMatrixArrayType = (
+  type: Float32ArrayConstructor | ArrayConstructor,
+) => {
+  ARRAY_TYPE = type;
+};
+
+export const toRadian = (a: number) => {
+  return a * degree;
+};
+
+export const equals = (a: number, b: number) => {
+  return Math.abs(a - b) <= EPSILON * Math.max(1.0, Math.abs(a), Math.abs(b));
+};
+
+export const rand = (min: number, max: number) => {
+  return Math.floor(Math.random() * (max - min + 1) + min);
+};
+
+export const isPowerOfTwo = (value: number) => {
+  return value && !(value & (value - 1));
+};
+
+const getTimingBezier = (
+  a: number,
+  b: number,
+  c: number,
+  d: number,
+): ((time: number) => number | undefined) => {
+  const xc = 3.0 * a;
+  const xb = 3.0 * (c - a) - xc;
+  const xa = 1.0 - xc - xb;
+  const yc = 3.0 * b;
+  const yb = 3.0 * (d - b) - yc;
+  const ya = 1.0 - yc - yb;
+
+  return function (time: number): number | undefined {
+    if (time >= 1.0) {
+      return 1;
+    }
+    if (time <= 0) {
+      return 0;
+    }
+
+    let t = 0.5,
+      cbx,
+      cbxd,
+      dx;
+
+    for (let it = 0; it < 20; it++) {
+      cbx = t * (t * (t * xa + xb) + xc);
+      dx = time - cbx;
+      if (dx > -1e-8 && dx < 1e-8) {
+        return t * (t * (t * ya + yb) + yc);
+      }
+
+      // Cubic bezier derivative.
+      cbxd = t * (t * (3 * xa) + 2 * xb) + xc;
+
+      if (cbxd > 1e-10 && cbxd < 1e-10) {
+        // Problematic. Fall back to binary search method.
+        break;
+      }
+
+      t += dx / cbxd;
+    }
+
+    // Fallback: binary search method. This is more reliable when there are near-0 slopes.
+    let minT = 0;
+    let maxT = 1;
+    for (let it = 0; it < 20; it++) {
+      t = 0.5 * (minT + maxT);
+
+      cbx = t * (t * (t * xa + xb) + xc);
+
+      dx = time - cbx;
+      if (dx > -1e-8 && dx < 1e-8) {
+        // Solution found!
+        return t * (t * (t * ya + yb) + yc);
+      }
+
+      if (dx < 0) {
+        maxT = t;
+      } else {
+        minT = t;
+      }
+    }
+  };
+};
+
+export const getTimingFunction = memo(
+  (str: string): ((time: number) => number | undefined) => {
+    switch (str) {
+      case 'linear':
+        return function (time: number) {
+          return time;
+        };
+      case 'ease':
+        return getTimingBezier(0.25, 0.1, 0.25, 1.0);
+
+      case 'ease-in':
+        return getTimingBezier(0.42, 0, 1.0, 1.0);
+      case 'ease-out':
+        return getTimingBezier(0, 0, 0.58, 1.0);
+      case 'ease-in-out':
+        return getTimingBezier(0.42, 0, 0.58, 1.0);
+
+      case 'ease-in-sine':
+        return getTimingBezier(0.12, 0, 0.39, 0);
+      case 'ease-out-sine':
+        return getTimingBezier(0.12, 0, 0.39, 0);
+      case 'ease-in-out-sine':
+        return getTimingBezier(0.37, 0, 0.63, 1);
+
+      case 'ease-in-cubic':
+        return getTimingBezier(0.32, 0, 0.67, 0);
+      case 'ease-out-cubic':
+        return getTimingBezier(0.33, 1, 0.68, 1);
+      case 'ease-in-out-cubic':
+        return getTimingBezier(0.65, 0, 0.35, 1);
+
+      case 'ease-in-circ':
+        return getTimingBezier(0.55, 0, 1, 0.45);
+      case 'ease-out-circ':
+        return getTimingBezier(0, 0.55, 0.45, 1);
+      case 'ease-in-out-circ':
+        return getTimingBezier(0.85, 0, 0.15, 1);
+
+      case 'ease-in-back':
+        return getTimingBezier(0.36, 0, 0.66, -0.56);
+      case 'ease-out-back':
+        return getTimingBezier(0.34, 1.56, 0.64, 1);
+      case 'ease-in-out-back':
+        return getTimingBezier(0.68, -0.6, 0.32, 1.6);
+
+      case 'step-start':
+        return function () {
+          return 1;
+        };
+      case 'step-end':
+        return function (time: number) {
+          return time === 1 ? 1 : 0;
+        };
+      default:
+        // eslint-disable-next-line no-case-declarations
+        const s = 'cubic-bezier(';
+        if (str && str.indexOf(s) === 0) {
+          const parts = str
+            .substr(s.length, str.length - s.length - 1)
+            .split(',');
+          if (parts.length !== 4) {
+            console.warn('Unknown timing function: ' + str);
+            // Fallback: use linear.
+            return function (time) {
+              return time;
+            };
+          }
+          const a = parseFloat(parts[0] || '0.42');
+          const b = parseFloat(parts[1] || '0');
+          const c = parseFloat(parts[2] || '1');
+          const d = parseFloat(parts[3] || '1');
+
+          if (isNaN(a) || isNaN(b) || isNaN(c) || isNaN(d)) {
+            console.warn(' Unknown timing function: ' + str);
+            // Fallback: use linear.
+            return function (time) {
+              return time;
+            };
+          }
+
+          return getTimingBezier(a, b, c, d);
+        } else {
+          console.warn('Unknown timing function: ' + str);
+          // Fallback: use linear.
+          return function (time) {
+            return time;
+          };
+        }
+    }
+  },
+);
+
+if (!Math.hypot)
+  Math.hypot = (...args: number[]) => {
+    let y = 0,
+      i = args.length;
+    while (i--) {
+      y += args[i]! * args[i]!;
+    }
+    return Math.sqrt(y);
+  };

package/src/env.d.ts

@@ -1,7 +1,7 @@
-interface ImportMetaEnv {
-  readonly PROD: boolean;
-}
-
-interface ImportMeta {
-  readonly env: ImportMetaEnv;
-}
+interface ImportMetaEnv {
+  readonly PROD: boolean;
+}
+
+interface ImportMeta {
+  readonly env: ImportMetaEnv;
+}

package/src/main-api/ICoreDriver.ts

@@ -1,66 +1,66 @@
-/*
- * If not stated otherwise in this file or this component's LICENSE file the
- * following copyright and licenses apply:
- *
- * Copyright 2023 Comcast Cable Communications Management, LLC.
- *
- * Licensed under the Apache License, Version 2.0 (the License);
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-import type {
-  FpsUpdatePayload,
-  FrameTickPayload,
-} from '../common/CommonTypes.js';
-import type {
-  INode,
-  INodeWritableProps,
-  ITextNode,
-  ITextNodeWritableProps,
-} from './INode.js';
-import type { RendererMain, RendererMainSettings } from './RendererMain.js';
-
-/**
- * This interface is to be implemented by Core Drivers
- *
- * @remarks
- * Both the {@link MainCoreDriver} and the {@link ThreadXCoreDriver} exist
- * that implement this interface to support both the single-threaded and
- * multi-threaded Core modes.
- */
-export interface ICoreDriver {
-  init(
-    rendererMain: RendererMain,
-    rendererSettings: Required<RendererMainSettings>,
-    canvas: HTMLCanvasElement,
-  ): Promise<void>;
-
-  createNode(props: INodeWritableProps): INode;
-
-  createTextNode(props: ITextNodeWritableProps): ITextNode;
-
-  // TODO: Nodes can be destroyed from the INode directly. Do we need this method
-  // on this interface? All it does is call the destroy() method on the node.
-  destroyNode(node: INode): void;
-
-  getRootNode(): INode;
-
-  releaseTexture(textureDescId: number): void;
-
-  onCreateNode(node: INode): void;
-
-  onBeforeDestroyNode(node: INode): void;
-
-  onFpsUpdate(fpsData: FpsUpdatePayload): void;
-
-  onFrameTick(frameTickData: FrameTickPayload): void;
-}
+/*
+ * If not stated otherwise in this file or this component's LICENSE file the
+ * following copyright and licenses apply:
+ *
+ * Copyright 2023 Comcast Cable Communications Management, LLC.
+ *
+ * Licensed under the Apache License, Version 2.0 (the License);
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+import type {
+  FpsUpdatePayload,
+  FrameTickPayload,
+} from '../common/CommonTypes.js';
+import type {
+  INode,
+  INodeWritableProps,
+  ITextNode,
+  ITextNodeWritableProps,
+} from './INode.js';
+import type { RendererMain, RendererMainSettings } from './RendererMain.js';
+
+/**
+ * This interface is to be implemented by Core Drivers
+ *
+ * @remarks
+ * Both the {@link MainCoreDriver} and the {@link ThreadXCoreDriver} exist
+ * that implement this interface to support both the single-threaded and
+ * multi-threaded Core modes.
+ */
+export interface ICoreDriver {
+  init(
+    rendererMain: RendererMain,
+    rendererSettings: Required<RendererMainSettings>,
+    canvas: HTMLCanvasElement,
+  ): Promise<void>;
+
+  createNode(props: INodeWritableProps): INode;
+
+  createTextNode(props: ITextNodeWritableProps): ITextNode;
+
+  // TODO: Nodes can be destroyed from the INode directly. Do we need this method
+  // on this interface? All it does is call the destroy() method on the node.
+  destroyNode(node: INode): void;
+
+  getRootNode(): INode;
+
+  releaseTexture(textureDescId: number): void;
+
+  onCreateNode(node: INode): void;
+
+  onBeforeDestroyNode(node: INode): void;
+
+  onFpsUpdate(fpsData: FpsUpdatePayload): void;
+
+  onFrameTick(frameTickData: FrameTickPayload): void;
+}