@funnycode/myclaude 0.1.55 → 0.1.60

package/seed/marketplaces/ecc/skills/remotion-video-creation/rules/sequencing.md

@@ -1,106 +1,106 @@
----
-name: sequencing
-description: Sequencing patterns for Remotion - delay, trim, limit duration of items
-metadata:
-  tags: sequence, series, timing, delay, trim
----
-
-Use `<Sequence>` to delay when an element appears in the timeline.
-
-```tsx
-import { Sequence } from "remotion";
-
-const {fps} = useVideoConfig();
-
-<Sequence from={1 * fps} durationInFrames={2 * fps} premountFor={1 * fps}>
-  <Title />
-</Sequence>
-<Sequence from={2 * fps} durationInFrames={2 * fps} premountFor={1 * fps}>
-  <Subtitle />
-</Sequence>
-```
-
-This will by default wrap the component in an absolute fill element.
-If the items should not be wrapped, use the `layout` prop:
-
-```tsx
-<Sequence layout="none">
-  <Title />
-</Sequence>
-```
-
-## Premounting
-
-This loads the component in the timeline before it is actually played.
-Always premount any `<Sequence>`!
-
-```tsx
-<Sequence premountFor={1 * fps}>
-  <Title />
-</Sequence>
-```
-
-## Series
-
-Use `<Series>` when elements should play one after another without overlap.
-
-```tsx
-import {Series} from 'remotion';
-
-<Series>
-  <Series.Sequence durationInFrames={45}>
-    <Intro />
-  </Series.Sequence>
-  <Series.Sequence durationInFrames={60}>
-    <MainContent />
-  </Series.Sequence>
-  <Series.Sequence durationInFrames={30}>
-    <Outro />
-  </Series.Sequence>
-</Series>;
-```
-
-Same as with `<Sequence>`, the items will be wrapped in an absolute fill element by default when using `<Series.Sequence>`, unless the `layout` prop is set to `none`.
-
-### Series with overlaps
-
-Use negative offset for overlapping sequences:
-
-```tsx
-<Series>
-  <Series.Sequence durationInFrames={60}>
-    <SceneA />
-  </Series.Sequence>
-  <Series.Sequence offset={-15} durationInFrames={60}>
-    {/* Starts 15 frames before SceneA ends */}
-    <SceneB />
-  </Series.Sequence>
-</Series>
-```
-
-## Frame References Inside Sequences
-
-Inside a Sequence, `useCurrentFrame()` returns the local frame (starting from 0):
-
-```tsx
-<Sequence from={60} durationInFrames={30}>
-  <MyComponent />
-  {/* Inside MyComponent, useCurrentFrame() returns 0-29, not 60-89 */}
-</Sequence>
-```
-
-## Nested Sequences
-
-Sequences can be nested for complex timing:
-
-```tsx
-<Sequence from={0} durationInFrames={120}>
-  <Background />
-  <Sequence from={15} durationInFrames={90} layout="none">
-    <Title />
-  </Sequence>
-  <Sequence from={45} durationInFrames={60} layout="none">
-    <Subtitle />
-  </Sequence>
-</Sequence>
-```
+---
+name: sequencing
+description: Sequencing patterns for Remotion - delay, trim, limit duration of items
+metadata:
+  tags: sequence, series, timing, delay, trim
+---
+
+Use `<Sequence>` to delay when an element appears in the timeline.
+
+```tsx
+import { Sequence } from "remotion";
+
+const {fps} = useVideoConfig();
+
+<Sequence from={1 * fps} durationInFrames={2 * fps} premountFor={1 * fps}>
+  <Title />
+</Sequence>
+<Sequence from={2 * fps} durationInFrames={2 * fps} premountFor={1 * fps}>
+  <Subtitle />
+</Sequence>
+```
+
+This will by default wrap the component in an absolute fill element.
+If the items should not be wrapped, use the `layout` prop:
+
+```tsx
+<Sequence layout="none">
+  <Title />
+</Sequence>
+```
+
+## Premounting
+
+This loads the component in the timeline before it is actually played.
+Always premount any `<Sequence>`!
+
+```tsx
+<Sequence premountFor={1 * fps}>
+  <Title />
+</Sequence>
+```
+
+## Series
+
+Use `<Series>` when elements should play one after another without overlap.
+
+```tsx
+import {Series} from 'remotion';
+
+<Series>
+  <Series.Sequence durationInFrames={45}>
+    <Intro />
+  </Series.Sequence>
+  <Series.Sequence durationInFrames={60}>
+    <MainContent />
+  </Series.Sequence>
+  <Series.Sequence durationInFrames={30}>
+    <Outro />
+  </Series.Sequence>
+</Series>;
+```
+
+Same as with `<Sequence>`, the items will be wrapped in an absolute fill element by default when using `<Series.Sequence>`, unless the `layout` prop is set to `none`.
+
+### Series with overlaps
+
+Use negative offset for overlapping sequences:
+
+```tsx
+<Series>
+  <Series.Sequence durationInFrames={60}>
+    <SceneA />
+  </Series.Sequence>
+  <Series.Sequence offset={-15} durationInFrames={60}>
+    {/* Starts 15 frames before SceneA ends */}
+    <SceneB />
+  </Series.Sequence>
+</Series>
+```
+
+## Frame References Inside Sequences
+
+Inside a Sequence, `useCurrentFrame()` returns the local frame (starting from 0):
+
+```tsx
+<Sequence from={60} durationInFrames={30}>
+  <MyComponent />
+  {/* Inside MyComponent, useCurrentFrame() returns 0-29, not 60-89 */}
+</Sequence>
+```
+
+## Nested Sequences
+
+Sequences can be nested for complex timing:
+
+```tsx
+<Sequence from={0} durationInFrames={120}>
+  <Background />
+  <Sequence from={15} durationInFrames={90} layout="none">
+    <Title />
+  </Sequence>
+  <Sequence from={45} durationInFrames={60} layout="none">
+    <Subtitle />
+  </Sequence>
+</Sequence>
+```

package/seed/marketplaces/ecc/skills/remotion-video-creation/rules/tailwind.md

@@ -1,11 +1,11 @@
----
-name: tailwind
-description: Using TailwindCSS in Remotion.
-metadata:
----
-
-You can and should use TailwindCSS in Remotion, if TailwindCSS is installed in the project.
-
-Don't use `transition-*` or `animate-*` classes - always animate using the `useCurrentFrame()` hook.
-
-Tailwind must be installed and enabled first in a Remotion project - fetch  <https://www.remotion.dev/docs/tailwind> using WebFetch for instructions.
+---
+name: tailwind
+description: Using TailwindCSS in Remotion.
+metadata:
+---
+
+You can and should use TailwindCSS in Remotion, if TailwindCSS is installed in the project.
+
+Don't use `transition-*` or `animate-*` classes - always animate using the `useCurrentFrame()` hook.
+
+Tailwind must be installed and enabled first in a Remotion project - fetch  <https://www.remotion.dev/docs/tailwind> using WebFetch for instructions.

package/seed/marketplaces/ecc/skills/remotion-video-creation/rules/text-animations.md

@@ -1,20 +1,20 @@
----
-name: text-animations
-description: Typography and text animation patterns for Remotion.
-metadata:
-  tags: typography, text, typewriter, highlighter ken
----
-
-## Text animations
-
-Based on `useCurrentFrame()`, reduce the string character by character to create a typewriter effect.
-
-## Typewriter Effect
-
-See [Typewriter](assets/text-animations-typewriter.tsx) for an advanced example with a blinking cursor and a pause after the first sentence.
-
-Always use string slicing for typewriter effects. Never use per-character opacity.
-
-## Word Highlighting
-
-See [Word Highlight](assets/text-animations-word-highlight.tsx) for an example for how a word highlight is animated, like with a highlighter pen.
+---
+name: text-animations
+description: Typography and text animation patterns for Remotion.
+metadata:
+  tags: typography, text, typewriter, highlighter ken
+---
+
+## Text animations
+
+Based on `useCurrentFrame()`, reduce the string character by character to create a typewriter effect.
+
+## Typewriter Effect
+
+See [Typewriter](assets/text-animations-typewriter.tsx) for an advanced example with a blinking cursor and a pause after the first sentence.
+
+Always use string slicing for typewriter effects. Never use per-character opacity.
+
+## Word Highlighting
+
+See [Word Highlight](assets/text-animations-word-highlight.tsx) for an example for how a word highlight is animated, like with a highlighter pen.

package/seed/marketplaces/ecc/skills/remotion-video-creation/rules/timing.md

@@ -1,179 +1,179 @@
----
-name: timing
-description: Interpolation curves in Remotion - linear, easing, spring animations
-metadata:
-  tags: spring, bounce, easing, interpolation
----
-
-A simple linear interpolation is done using the `interpolate` function.
-
-```ts title="Going from 0 to 1 over 100 frames"
-import {interpolate} from 'remotion';
-
-const opacity = interpolate(frame, [0, 100], [0, 1]);
-```
-
-By default, the values are not clamped, so the value can go outside the range [0, 1].
-Here is how they can be clamped:
-
-```ts title="Going from 0 to 1 over 100 frames with extrapolation"
-const opacity = interpolate(frame, [0, 100], [0, 1], {
-  extrapolateRight: 'clamp',
-  extrapolateLeft: 'clamp',
-});
-```
-
-## Spring animations
-
-Spring animations have a more natural motion.
-They go from 0 to 1 over time.
-
-```ts title="Spring animation from 0 to 1 over 100 frames"
-import {spring, useCurrentFrame, useVideoConfig} from 'remotion';
-
-const frame = useCurrentFrame();
-const {fps} = useVideoConfig();
-
-const scale = spring({
-  frame,
-  fps,
-});
-```
-
-### Physical properties
-
-The default configuration is: `mass: 1, damping: 10, stiffness: 100`.
-This leads to the animation having a bit of bounce before it settles.
-
-The config can be overwritten like this:
-
-```ts
-const scale = spring({
-  frame,
-  fps,
-  config: {damping: 200},
-});
-```
-
-The recommended configuration for a natural motion without a bounce is: `{ damping: 200 }`.
-
-Here are some common configurations:
-
-```tsx
-const smooth = {damping: 200}; // Smooth, no bounce (subtle reveals)
-const snappy = {damping: 20, stiffness: 200}; // Snappy, minimal bounce (UI elements)
-const bouncy = {damping: 8}; // Bouncy entrance (playful animations)
-const heavy = {damping: 15, stiffness: 80, mass: 2}; // Heavy, slow, small bounce
-```
-
-### Delay
-
-The animation starts immediately by default.
-Use the `delay` parameter to delay the animation by a number of frames.
-
-```tsx
-const entrance = spring({
-  frame: frame - ENTRANCE_DELAY,
-  fps,
-  delay: 20,
-});
-```
-
-### Duration
-
-A `spring()` has a natural duration based on the physical properties.
-To stretch the animation to a specific duration, use the `durationInFrames` parameter.
-
-```tsx
-const spring = spring({
-  frame,
-  fps,
-  durationInFrames: 40,
-});
-```
-
-### Combining spring() with interpolate()
-
-Map spring output (0-1) to custom ranges:
-
-```tsx
-const springProgress = spring({
-  frame,
-  fps,
-});
-
-// Map to rotation
-const rotation = interpolate(springProgress, [0, 1], [0, 360]);
-
-<div style={{rotate: rotation + 'deg'}} />;
-```
-
-### Adding springs
-
-Springs return just numbers, so math can be performed:
-
-```tsx
-const frame = useCurrentFrame();
-const {fps, durationInFrames} = useVideoConfig();
-
-const inAnimation = spring({
-  frame,
-  fps,
-});
-const outAnimation = spring({
-  frame,
-  fps,
-  durationInFrames: 1 * fps,
-  delay: durationInFrames - 1 * fps,
-});
-
-const scale = inAnimation - outAnimation;
-```
-
-## Easing
-
-Easing can be added to the `interpolate` function:
-
-```ts
-import {interpolate, Easing} from 'remotion';
-
-const value1 = interpolate(frame, [0, 100], [0, 1], {
-  easing: Easing.inOut(Easing.quad),
-  extrapolateLeft: 'clamp',
-  extrapolateRight: 'clamp',
-});
-```
-
-The default easing is `Easing.linear`.
-There are various other convexities:
-
-- `Easing.in` for starting slow and accelerating
-- `Easing.out` for starting fast and slowing down
-- `Easing.inOut`
-
-and curves (sorted from most linear to most curved):
-
-- `Easing.quad`
-- `Easing.sin`
-- `Easing.exp`
-- `Easing.circle`
-
-Convexities and curves need be combined for an easing function:
-
-```ts
-const value1 = interpolate(frame, [0, 100], [0, 1], {
-  easing: Easing.inOut(Easing.quad),
-  extrapolateLeft: 'clamp',
-  extrapolateRight: 'clamp',
-});
-```
-
-Cubic bezier curves are also supported:
-
-```ts
-const value1 = interpolate(frame, [0, 100], [0, 1], {
-  easing: Easing.bezier(0.8, 0.22, 0.96, 0.65),
-  extrapolateLeft: 'clamp',
-  extrapolateRight: 'clamp',
-});
-```
+---
+name: timing
+description: Interpolation curves in Remotion - linear, easing, spring animations
+metadata:
+  tags: spring, bounce, easing, interpolation
+---
+
+A simple linear interpolation is done using the `interpolate` function.
+
+```ts title="Going from 0 to 1 over 100 frames"
+import {interpolate} from 'remotion';
+
+const opacity = interpolate(frame, [0, 100], [0, 1]);
+```
+
+By default, the values are not clamped, so the value can go outside the range [0, 1].
+Here is how they can be clamped:
+
+```ts title="Going from 0 to 1 over 100 frames with extrapolation"
+const opacity = interpolate(frame, [0, 100], [0, 1], {
+  extrapolateRight: 'clamp',
+  extrapolateLeft: 'clamp',
+});
+```
+
+## Spring animations
+
+Spring animations have a more natural motion.
+They go from 0 to 1 over time.
+
+```ts title="Spring animation from 0 to 1 over 100 frames"
+import {spring, useCurrentFrame, useVideoConfig} from 'remotion';
+
+const frame = useCurrentFrame();
+const {fps} = useVideoConfig();
+
+const scale = spring({
+  frame,
+  fps,
+});
+```
+
+### Physical properties
+
+The default configuration is: `mass: 1, damping: 10, stiffness: 100`.
+This leads to the animation having a bit of bounce before it settles.
+
+The config can be overwritten like this:
+
+```ts
+const scale = spring({
+  frame,
+  fps,
+  config: {damping: 200},
+});
+```
+
+The recommended configuration for a natural motion without a bounce is: `{ damping: 200 }`.
+
+Here are some common configurations:
+
+```tsx
+const smooth = {damping: 200}; // Smooth, no bounce (subtle reveals)
+const snappy = {damping: 20, stiffness: 200}; // Snappy, minimal bounce (UI elements)
+const bouncy = {damping: 8}; // Bouncy entrance (playful animations)
+const heavy = {damping: 15, stiffness: 80, mass: 2}; // Heavy, slow, small bounce
+```
+
+### Delay
+
+The animation starts immediately by default.
+Use the `delay` parameter to delay the animation by a number of frames.
+
+```tsx
+const entrance = spring({
+  frame: frame - ENTRANCE_DELAY,
+  fps,
+  delay: 20,
+});
+```
+
+### Duration
+
+A `spring()` has a natural duration based on the physical properties.
+To stretch the animation to a specific duration, use the `durationInFrames` parameter.
+
+```tsx
+const spring = spring({
+  frame,
+  fps,
+  durationInFrames: 40,
+});
+```
+
+### Combining spring() with interpolate()
+
+Map spring output (0-1) to custom ranges:
+
+```tsx
+const springProgress = spring({
+  frame,
+  fps,
+});
+
+// Map to rotation
+const rotation = interpolate(springProgress, [0, 1], [0, 360]);
+
+<div style={{rotate: rotation + 'deg'}} />;
+```
+
+### Adding springs
+
+Springs return just numbers, so math can be performed:
+
+```tsx
+const frame = useCurrentFrame();
+const {fps, durationInFrames} = useVideoConfig();
+
+const inAnimation = spring({
+  frame,
+  fps,
+});
+const outAnimation = spring({
+  frame,
+  fps,
+  durationInFrames: 1 * fps,
+  delay: durationInFrames - 1 * fps,
+});
+
+const scale = inAnimation - outAnimation;
+```
+
+## Easing
+
+Easing can be added to the `interpolate` function:
+
+```ts
+import {interpolate, Easing} from 'remotion';
+
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.inOut(Easing.quad),
+  extrapolateLeft: 'clamp',
+  extrapolateRight: 'clamp',
+});
+```
+
+The default easing is `Easing.linear`.
+There are various other convexities:
+
+- `Easing.in` for starting slow and accelerating
+- `Easing.out` for starting fast and slowing down
+- `Easing.inOut`
+
+and curves (sorted from most linear to most curved):
+
+- `Easing.quad`
+- `Easing.sin`
+- `Easing.exp`
+- `Easing.circle`
+
+Convexities and curves need be combined for an easing function:
+
+```ts
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.inOut(Easing.quad),
+  extrapolateLeft: 'clamp',
+  extrapolateRight: 'clamp',
+});
+```
+
+Cubic bezier curves are also supported:
+
+```ts
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.bezier(0.8, 0.22, 0.96, 0.65),
+  extrapolateLeft: 'clamp',
+  extrapolateRight: 'clamp',
+});
+```

package/seed/marketplaces/ecc/skills/remotion-video-creation/rules/transcribe-captions.md

@@ -1,19 +1,19 @@
----
-name: transcribe-captions
-description: Transcribing audio to generate captions in Remotion
-metadata:
-  tags: captions, transcribe, whisper, audio, speech-to-text
----
-
-# Transcribing audio
-
-Remotion provides several built-in options for transcribing audio to generate captions:
-
-- `@remotion/install-whisper-cpp` - Transcribe locally on a server using Whisper.cpp. Fast and free, but requires server infrastructure.
-  <https://remotion.dev/docs/install-whisper-cpp>
-
-- `@remotion/whisper-web` - Transcribe in the browser using WebAssembly. No server needed and free, but slower due to WASM overhead.
-  <https://remotion.dev/docs/whisper-web>
-
-- `@remotion/openai-whisper` - Use OpenAI Whisper API for cloud-based transcription. Fast and no server needed, but requires payment.
-  <https://remotion.dev/docs/openai-whisper/openai-whisper-api-to-captions>
+---
+name: transcribe-captions
+description: Transcribing audio to generate captions in Remotion
+metadata:
+  tags: captions, transcribe, whisper, audio, speech-to-text
+---
+
+# Transcribing audio
+
+Remotion provides several built-in options for transcribing audio to generate captions:
+
+- `@remotion/install-whisper-cpp` - Transcribe locally on a server using Whisper.cpp. Fast and free, but requires server infrastructure.
+  <https://remotion.dev/docs/install-whisper-cpp>
+
+- `@remotion/whisper-web` - Transcribe in the browser using WebAssembly. No server needed and free, but slower due to WASM overhead.
+  <https://remotion.dev/docs/whisper-web>
+
+- `@remotion/openai-whisper` - Use OpenAI Whisper API for cloud-based transcription. Fast and no server needed, but requires payment.
+  <https://remotion.dev/docs/openai-whisper/openai-whisper-api-to-captions>